| 1 | ! (c) British Crown Copyright 2008, the Met Office. |
|---|
| 2 | ! All rights reserved. |
|---|
| 3 | ! |
|---|
| 4 | ! Redistribution and use in source and binary forms, with or without modification, are permitted |
|---|
| 5 | ! provided that the following conditions are met: |
|---|
| 6 | ! |
|---|
| 7 | ! * Redistributions of source code must retain the above copyright notice, this list |
|---|
| 8 | ! of conditions and the following disclaimer. |
|---|
| 9 | ! * Redistributions in binary form must reproduce the above copyright notice, this list |
|---|
| 10 | ! of conditions and the following disclaimer in the documentation and/or other materials |
|---|
| 11 | ! provided with the distribution. |
|---|
| 12 | ! * Neither the name of the Met Office nor the names of its contributors may be used |
|---|
| 13 | ! to endorse or promote products derived from this software without specific prior written |
|---|
| 14 | ! permission. |
|---|
| 15 | ! |
|---|
| 16 | ! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR |
|---|
| 17 | ! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND |
|---|
| 18 | ! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
|---|
| 19 | ! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|---|
| 20 | ! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
|---|
| 21 | ! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
|---|
| 22 | ! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
|---|
| 23 | ! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|---|
| 24 | |
|---|
| 25 | ! |
|---|
| 26 | ! History: |
|---|
| 27 | ! Jul 2007 - A. Bodas-Salcedo - Initial version |
|---|
| 28 | ! Jul 2008 - A. Bodas-Salcedo - Added definitions of ISCCP axes |
|---|
| 29 | ! Oct 2008 - H. Chepfer - Added PARASOL_NREFL |
|---|
| 30 | ! Jun 2010 - R. Marchand - Modified to support quickbeam V3, added ifdef for hydrometeor definitions |
|---|
| 31 | ! |
|---|
| 32 | ! |
|---|
| 33 | ! |
|---|
| 34 | |
|---|
| 35 | !!INCLUDE "cosp_defs.h" |
|---|
| 36 | #define MMF_V3_SINGLE_MOMENT mmf_v3_single_momen |
|---|
| 37 | MODULE MOD_COSP_CONSTANTS |
|---|
| 38 | IMPLICIT NONE |
|---|
| 39 | |
|---|
| 40 | character(len=32) :: COSP_VERSION='COSP v1.4' |
|---|
| 41 | |
|---|
| 42 | ! Mode debug ou prod (AI 0302018) |
|---|
| 43 | logical :: ok_debug_cosp = .true. |
|---|
| 44 | |
|---|
| 45 | ! Indices to address arrays of LS and CONV hydrometeors |
|---|
| 46 | integer,parameter :: I_LSCLIQ = 1 |
|---|
| 47 | integer,parameter :: I_LSCICE = 2 |
|---|
| 48 | integer,parameter :: I_LSRAIN = 3 |
|---|
| 49 | integer,parameter :: I_LSSNOW = 4 |
|---|
| 50 | integer,parameter :: I_CVCLIQ = 5 |
|---|
| 51 | integer,parameter :: I_CVCICE = 6 |
|---|
| 52 | integer,parameter :: I_CVRAIN = 7 |
|---|
| 53 | integer,parameter :: I_CVSNOW = 8 |
|---|
| 54 | integer,parameter :: I_LSGRPL = 9 |
|---|
| 55 | |
|---|
| 56 | ! Missing value |
|---|
| 57 | real,parameter :: R_UNDEF = -1.0E30 |
|---|
| 58 | |
|---|
| 59 | ! Number of possible output variables |
|---|
| 60 | integer,parameter :: N_OUT_LIST = 74 !OPAQ 65+7 !TIBO 72+2 |
|---|
| 61 | integer,parameter :: N3D = 11 !TIBO 10+1 |
|---|
| 62 | integer,parameter :: N2D = 19 !OPAQ 14+4 !TIBO 18+1 |
|---|
| 63 | integer,parameter :: N1D = 43 !OPAQ 40+3 |
|---|
| 64 | |
|---|
| 65 | ! Value for forward model result from a level that is under the ground |
|---|
| 66 | real,parameter :: R_GROUND = -1.0E20 |
|---|
| 67 | |
|---|
| 68 | ! Stratiform and convective clouds in frac_out |
|---|
| 69 | integer, parameter :: I_LSC = 1, & ! Large-scale clouds |
|---|
| 70 | I_CVC = 2 ! Convective clouds |
|---|
| 71 | |
|---|
| 72 | ! Timing of different simulators, including statistics module |
|---|
| 73 | integer, parameter :: N_SIMULATORS = 7 |
|---|
| 74 | integer,parameter :: I_RADAR = 1 |
|---|
| 75 | integer,parameter :: I_LIDAR = 2 |
|---|
| 76 | integer,parameter :: I_ISCCP = 3 |
|---|
| 77 | integer,parameter :: I_MISR = 4 |
|---|
| 78 | integer,parameter :: I_MODIS = 5 |
|---|
| 79 | integer,parameter :: I_RTTOV = 6 |
|---|
| 80 | integer,parameter :: I_STATS = 7 |
|---|
| 81 | character*32, dimension(N_SIMULATORS) :: SIM_NAME = (/'Radar','Lidar','ISCCP','MISR ','MODIS','RTTOV','Stats'/) |
|---|
| 82 | integer,dimension(N_SIMULATORS) :: tsim |
|---|
| 83 | data tsim/N_SIMULATORS*0.0/ |
|---|
| 84 | |
|---|
| 85 | !--- Radar constants |
|---|
| 86 | ! CFAD constants |
|---|
| 87 | integer,parameter :: DBZE_BINS = 15 ! Number of dBZe bins in histogram (cfad) |
|---|
| 88 | real,parameter :: DBZE_MIN = -100.0 ! Minimum value for radar reflectivity |
|---|
| 89 | real,parameter :: DBZE_MAX = 80.0 ! Maximum value for radar reflectivity |
|---|
| 90 | real,parameter :: CFAD_ZE_MIN = -50.0 ! Lower value of the first CFAD Ze bin |
|---|
| 91 | real,parameter :: CFAD_ZE_WIDTH = 5.0 ! Bin width (dBZe) |
|---|
| 92 | |
|---|
| 93 | |
|---|
| 94 | !--- Lidar constants |
|---|
| 95 | ! CFAD constants |
|---|
| 96 | integer,parameter :: SR_BINS = 15 |
|---|
| 97 | integer,parameter :: DPOL_BINS = 6 |
|---|
| 98 | real,parameter :: LIDAR_UNDEF = 999.999 |
|---|
| 99 | |
|---|
| 100 | ! Other constants |
|---|
| 101 | integer,parameter :: LIDAR_NCAT = 4 |
|---|
| 102 | integer,parameter :: LIDAR_NTYPE = 3 !OPAQ |
|---|
| 103 | integer,parameter :: PARASOL_NREFL = 5 ! parasol |
|---|
| 104 | real,parameter,dimension(PARASOL_NREFL) :: PARASOL_SZA = (/0.0, 20.0, 40.0, 60.0, 80.0/) |
|---|
| 105 | real,parameter :: DEFAULT_LIDAR_REFF = 30.0e-6 ! Default lidar effective radius |
|---|
| 106 | |
|---|
| 107 | integer,parameter :: LIDAR_NTEMP = 40 |
|---|
| 108 | real,parameter,dimension(LIDAR_NTEMP) :: LIDAR_PHASE_TEMP=(/-91.5,-88.5,-85.5,-82.5,-79.5,-76.5,-73.5,-70.5,-67.5,-64.5, & |
|---|
| 109 | -61.5,-58.5,-55.5,-52.5,-49.5,-46.5,-43.5,-40.5,-37.5,-34.5, & |
|---|
| 110 | -31.5,-28.5,-25.5,-22.5,-19.5,-16.5,-13.5,-10.5, -7.5, -4.5, & |
|---|
| 111 | -1.5, 1.5, 4.5, 7.5, 10.5, 13.5, 16.5, 19.5, 22.5, 25.5/) |
|---|
| 112 | real,parameter,dimension(2,LIDAR_NTEMP) :: LIDAR_PHASE_TEMP_BNDS=reshape(source=(/-273.15,-90.,-90.,-87.,-87.,-84.,-84.,-81.,-81.,-78., & |
|---|
| 113 | -78.,-75.,-75.,-72.,-72.,-69.,-69.,-66.,-66.,-63., & |
|---|
| 114 | -63.,-60.,-60.,-57.,-57.,-54.,-54.,-51.,-51.,-48., & |
|---|
| 115 | -48.,-45.,-45.,-42.,-42.,-39.,-39.,-36.,-36.,-33., & |
|---|
| 116 | -33.,-30.,-30.,-27.,-27.,-24.,-24.,-21.,-21.,-18., & |
|---|
| 117 | -18.,-15.,-15.,-12.,-12., -9., -9., -6., -6., -3., & |
|---|
| 118 | -3., 0., 0., 3., 3., 6., 6., 9., 9., 12., & |
|---|
| 119 | 12., 15., 15., 18., 18., 21., 21., 24., 24.,100./),shape=(/2,40/)) |
|---|
| 120 | |
|---|
| 121 | !--- MISR constants |
|---|
| 122 | integer,parameter :: MISR_N_CTH = 16 |
|---|
| 123 | |
|---|
| 124 | !--- RTTOV constants |
|---|
| 125 | integer,parameter :: RTTOV_MAX_CHANNELS = 20 |
|---|
| 126 | |
|---|
| 127 | ! ISCCP tau-Pc axes |
|---|
| 128 | real,parameter,dimension(7) :: ISCCP_TAU = (/0.15, 0.80, 2.45, 6.5, 16.2, 41.5, 100.0/) |
|---|
| 129 | real,parameter,dimension(2,7) :: ISCCP_TAU_BNDS = reshape(source=(/0.0,0.3,0.3,1.30,1.30,3.6,3.6,9.4, & |
|---|
| 130 | 9.4,23.0,23.0,60.0,60.0,100000.0/), shape=(/2,7/)) |
|---|
| 131 | |
|---|
| 132 | real,parameter,dimension(7) :: ISCCP_PC = (/90000., 74000., 62000., 50000., 37500., 24500., 9000./) |
|---|
| 133 | real,parameter,dimension(2,7) :: ISCCP_PC_BNDS = reshape(source=(/100000.0,80000.0,80000.0,68000.0,68000.0,56000.0 & |
|---|
| 134 | ,56000.0,44000.0,44000.0,31000.0,31000.0,18000.0,18000.0,0.0/), shape=(/2,7/)) |
|---|
| 135 | |
|---|
| 136 | real,parameter,dimension(MISR_N_CTH) :: MISR_CTH = 1000.0*(/ 0., 0.25, 0.75, 1.25, 1.75, 2.25, 2.75, 3.5, & |
|---|
| 137 | 4.5, 6., 8., 10., 12., 14.5, 16., 18./) |
|---|
| 138 | real,parameter,dimension(2,MISR_N_CTH) :: MISR_CTH_BNDS = 1000.0*reshape(source=(/ & |
|---|
| 139 | -99.0, 0.0, 0.0, 0.5, 0.5, 1.0, 1.0, 1.5, & |
|---|
| 140 | 1.5, 2.0, 2.0, 2.5, 2.5, 3.0, 3.0, 4.0, & |
|---|
| 141 | 4.0, 5.0, 5.0, 7.0, 7.0, 9.0, 9.0, 11.0, & |
|---|
| 142 | 11.0, 13.0, 13.0, 15.0, 15.0, 17.0, 17.0, 99.0/), & |
|---|
| 143 | shape=(/2,MISR_N_CTH/)) |
|---|
| 144 | |
|---|
| 145 | |
|---|
| 146 | ! |
|---|
| 147 | ! The following code was modifed by Roj with implementation of quickbeam V3 |
|---|
| 148 | ! (1) use ifdef to support more than one microphyscis scheme |
|---|
| 149 | ! (2) added constants microphysic_scheme_name, LOAD_scale_LUTs, and SAVE_scale_LUTs |
|---|
| 150 | ! |
|---|
| 151 | |
|---|
| 152 | ! directory where LUTs will be stored |
|---|
| 153 | character*120 :: RADAR_SIM_LUT_DIRECTORY = './' |
|---|
| 154 | |
|---|
| 155 | #ifdef MMF_V3_SINGLE_MOMENT |
|---|
| 156 | |
|---|
| 157 | ! |
|---|
| 158 | ! Table hclass for quickbeam to support one-moment (bulk) microphysics scheme used by MMF V3.0 & V3.5 |
|---|
| 159 | ! |
|---|
| 160 | |
|---|
| 161 | ! |
|---|
| 162 | ! NOTE: if ANY value in this section of code is changed, the existing LUT |
|---|
| 163 | ! (i.e., the associated *.dat file) MUST be deleted so that a NEW |
|---|
| 164 | ! LUT will be created !!! |
|---|
| 165 | ! |
|---|
| 166 | character*120 :: RADAR_SIM_MICROPHYSICS_SCHEME_NAME = 'MMF_v3_single_moment' |
|---|
| 167 | |
|---|
| 168 | logical :: RADAR_SIM_LOAD_scale_LUTs_flag = .false. |
|---|
| 169 | logical :: RADAR_SIM_UPDATE_scale_LUTs_flag = .false. |
|---|
| 170 | integer,parameter :: N_HYDRO = 9 |
|---|
| 171 | |
|---|
| 172 | integer :: HCLASS_TYPE(N_HYDRO),HCLASS_PHASE(N_HYDRO) |
|---|
| 173 | |
|---|
| 174 | real :: HCLASS_DMIN(N_HYDRO),HCLASS_DMAX(N_HYDRO), & |
|---|
| 175 | HCLASS_APM(N_HYDRO),HCLASS_BPM(N_HYDRO),HCLASS_RHO(N_HYDRO), & |
|---|
| 176 | HCLASS_P1(N_HYDRO),HCLASS_P2(N_HYDRO),HCLASS_P3(N_HYDRO) |
|---|
| 177 | |
|---|
| 178 | ! HCLASS_CP is not used in the version of Quickbeam included in COSP |
|---|
| 179 | ! LSL LSI LSR LSS CVL CVI CVR CVS LSG |
|---|
| 180 | data HCLASS_TYPE/ 5, 1, 2, 2, 5, 1, 2, 2, 2/ |
|---|
| 181 | data HCLASS_PHASE/ 0, 1, 0, 1, 0, 1, 0, 1, 1/ |
|---|
| 182 | data HCLASS_DMIN/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 183 | data HCLASS_DMAX/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 184 | data HCLASS_APM/ 524, 110.8, 524, -1, 524, 110.8, 524, -1, -1/ |
|---|
| 185 | data HCLASS_BPM/ 3, 2.91, 3, -1, 3, 2.91, 3, -1, -1/ |
|---|
| 186 | data HCLASS_RHO/ -1, -1, -1, 100, -1, -1, -1, 100, 400/ |
|---|
| 187 | data HCLASS_P1/ -1, -1, 8.e6, 3.e6, -1, -1, 8.e6, 3.e6, 4.e6/ |
|---|
| 188 | data HCLASS_P2/ 6, 40, -1, -1, 6, 40, -1, -1, -1/ |
|---|
| 189 | data HCLASS_P3/ 0.3, 2, -1, -1, 0.3, 2, -1, -1, -1/ |
|---|
| 190 | |
|---|
| 191 | ! NOTES on HCLASS variables |
|---|
| 192 | ! |
|---|
| 193 | ! TYPE - Set to |
|---|
| 194 | ! 1 for modified gamma distribution, |
|---|
| 195 | ! 2 for exponential distribution, |
|---|
| 196 | ! 3 for power law distribution, |
|---|
| 197 | ! 4 for monodisperse distribution, |
|---|
| 198 | ! 5 for lognormal distribution. |
|---|
| 199 | |
|---|
| 200 | ! PHASE - Set to 0 for liquid, 1 for ice. |
|---|
| 201 | |
|---|
| 202 | ! DMIN - The minimum drop size for this class (micron), ignored for monodisperse. |
|---|
| 203 | ! DMAX - The maximum drop size for this class (micron), ignored for monodisperse. |
|---|
| 204 | ! Important note: The settings for DMIN and DMAX are |
|---|
| 205 | ! ignored in the current version for all distributions except for power |
|---|
| 206 | ! law. Except when the power law distribution is used, particle size |
|---|
| 207 | ! is fixed to vary from zero to infinity, a restriction that is expected |
|---|
| 208 | ! to be lifted in future versions. A placeholder must still be specified |
|---|
| 209 | ! for each. |
|---|
| 210 | |
|---|
| 211 | ! Density of particles is given by apm*D^bpm or a fixed value rho. ONLY specify ONE of these two!! |
|---|
| 212 | ! APM - The alpha_m coefficient in equation (1) (kg m**-beta_m ) |
|---|
| 213 | ! BPM - The beta_m coefficient in equation (1), see section 4.1. |
|---|
| 214 | |
|---|
| 215 | ! RHO - Hydrometeor density (kg m-3 ). |
|---|
| 216 | |
|---|
| 217 | ! P1, P2, P3 - are default distribution parameters that depend on the type |
|---|
| 218 | ! of distribution (see quickmbeam documentation for more information) |
|---|
| 219 | ! |
|---|
| 220 | ! Modified Gamma (must set P3 and one of P1 or P2) |
|---|
| 221 | ! P1 - Set to the total particle number concentration Nt /rho_a (kg-1 ), where |
|---|
| 222 | ! rho_a is the density of air in the radar volume. |
|---|
| 223 | ! P2 - Set to the particle mean diameter D (micron). |
|---|
| 224 | ! P3 - Set to the distribution width nu. |
|---|
| 225 | ! |
|---|
| 226 | ! Exponetial (set one of) |
|---|
| 227 | ! P1 - Set to a constant intercept parameter N0 (m-4). |
|---|
| 228 | ! P2 - Set to a constant lambda (micron-1). |
|---|
| 229 | ! |
|---|
| 230 | ! Power Law |
|---|
| 231 | ! P1 - Set this to the value of a constant power law parameter br |
|---|
| 232 | ! |
|---|
| 233 | ! Monodisperse |
|---|
| 234 | ! P1 - Set to a constant diameter D0 (micron) = Re. |
|---|
| 235 | ! |
|---|
| 236 | ! Log-normal (must set P3 and one of P1 or P2) |
|---|
| 237 | ! P1 - Set to the total particle number concentration Nt /rho_a (kg-1 ) |
|---|
| 238 | ! P2 - Set to the geometric mean particle radius rg (micron). |
|---|
| 239 | ! P3 - Set to the natural logarithm of the geometric standard deviation. |
|---|
| 240 | ! |
|---|
| 241 | |
|---|
| 242 | |
|---|
| 243 | real,dimension(N_HYDRO) :: N_ax,N_bx,alpha_x,c_x,d_x,g_x,a_x,b_x,gamma_1,gamma_2,gamma_3,gamma_4 |
|---|
| 244 | |
|---|
| 245 | ! Microphysical settings for the precipitation flux to mixing ratio conversion |
|---|
| 246 | ! LSL LSI LSR LSS CVL CVI CVR CVS LSG |
|---|
| 247 | data N_ax/ -1., -1., 8.e6, 3.e6, -1., -1., 8.e6, 3.e6, 4.e6/ |
|---|
| 248 | data N_bx/ -1., -1., 0.0, 0.0, -1., -1., 0.0, 0.0, 0.0/ |
|---|
| 249 | data alpha_x/ -1., -1., 0.0, 0.0, -1., -1., 0.0, 0.0, 0.0/ |
|---|
| 250 | data c_x/ -1., -1., 842.0, 4.84, -1., -1., 842.0, 4.84, 94.5/ |
|---|
| 251 | data d_x/ -1., -1., 0.8, 0.25, -1., -1., 0.8, 0.25, 0.5/ |
|---|
| 252 | data g_x/ -1., -1., 0.5, 0.5, -1., -1., 0.5, 0.5, 0.5/ |
|---|
| 253 | data a_x/ -1., -1., 524.0, 52.36, -1., -1., 524.0, 52.36, 209.44/ |
|---|
| 254 | data b_x/ -1., -1., 3.0, 3.0, -1., -1., 3.0, 3.0, 3.0/ |
|---|
| 255 | data gamma_1/ -1., -1., 17.83725, 8.284701, -1., -1., 17.83725, 8.284701, 11.63230/ |
|---|
| 256 | data gamma_2/ -1., -1., 6.0, 6.0, -1., -1., 6.0, 6.0, 6.0/ |
|---|
| 257 | data gamma_3/ -1., -1., 2.0, 2.0, -1., -1., 2.0, 2.0, 2.0/ |
|---|
| 258 | data gamma_4/ -1., -1., 6.0, 6.0, -1., -1., 6.0, 6.0, 6.0/ |
|---|
| 259 | |
|---|
| 260 | |
|---|
| 261 | |
|---|
| 262 | #endif |
|---|
| 263 | |
|---|
| 264 | |
|---|
| 265 | #ifdef MMF_V3p5_TWO_MOMENT |
|---|
| 266 | |
|---|
| 267 | ! |
|---|
| 268 | ! Table hclass for quickbeam to support two-moment "morrison" microphysics scheme used by V3.5 (SAM 6.8) |
|---|
| 269 | ! |
|---|
| 270 | ! This Number concentriation Np in [1/kg] MUST be input to COSP/radar simulator |
|---|
| 271 | ! |
|---|
| 272 | ! NOTE: Be sure to check that the ice-density (rho) set it this tables matches what you used |
|---|
| 273 | ! |
|---|
| 274 | |
|---|
| 275 | ! |
|---|
| 276 | ! NOTE: if ANY value in this section of code is changed, the existing LUT |
|---|
| 277 | ! (i.e., the associated *.dat file) MUST be deleted so that a NEW |
|---|
| 278 | ! LUT will be created !!! |
|---|
| 279 | ! |
|---|
| 280 | character*120 :: RADAR_SIM_MICROPHYSICS_SCHEME_NAME = 'MMF_v3.5_two_moment' |
|---|
| 281 | |
|---|
| 282 | logical :: RADAR_SIM_LOAD_scale_LUTs_flag = .false. |
|---|
| 283 | logical :: RADAR_SIM_UPDATE_scale_LUTs_flag = .false. |
|---|
| 284 | |
|---|
| 285 | integer,parameter :: N_HYDRO = 9 |
|---|
| 286 | |
|---|
| 287 | integer :: HCLASS_TYPE(N_HYDRO),HCLASS_PHASE(N_HYDRO) |
|---|
| 288 | |
|---|
| 289 | real :: HCLASS_DMIN(N_HYDRO),HCLASS_DMAX(N_HYDRO), & |
|---|
| 290 | HCLASS_APM(N_HYDRO),HCLASS_BPM(N_HYDRO),HCLASS_RHO(N_HYDRO), & |
|---|
| 291 | HCLASS_P1(N_HYDRO),HCLASS_P2(N_HYDRO),HCLASS_P3(N_HYDRO) |
|---|
| 292 | |
|---|
| 293 | ! HCLASS_CP is not used in the version of Quickbeam included in COSP |
|---|
| 294 | ! LSL LSI LSR LSS CVL CVI CVR CVS LSG |
|---|
| 295 | data HCLASS_TYPE/ 1, 1, 1, 1, 1, 1, 1, 1, 1/ |
|---|
| 296 | data HCLASS_PHASE/ 0, 1, 0, 1, 0, 1, 0, 1, 1/ |
|---|
| 297 | data HCLASS_DMIN/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 298 | data HCLASS_DMAX/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 299 | data HCLASS_APM/ 524, -1, 524, -1, 524, -1, 524, -1, -1/ |
|---|
| 300 | data HCLASS_BPM/ 3, -1, 3, -1, 3, -1, 3, -1, -1/ |
|---|
| 301 | data HCLASS_RHO/ -1, 500, -1, 100, -1, 500, -1, 100, 900/ |
|---|
| 302 | data HCLASS_P1/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 303 | data HCLASS_P2/ -1, -1, -1, -1, -1, -1, -1, -1, -1/ |
|---|
| 304 | data HCLASS_P3/ -2, 1, 1, 1, -2, 1, 1, 1, 1/ |
|---|
| 305 | ! Note: value of "-2" for HCLASS_P3 uses martin 1994 parameteriztion of gamma function width with Number concentration |
|---|
| 306 | #endif |
|---|
| 307 | |
|---|
| 308 | END MODULE MOD_COSP_CONSTANTS |
|---|
