Context Navigation

add_phys_tend_mod.F90 @ 4982

Last change on this file since 4982 was 4738, checked in by oboucher, 13 months ago
cleaning up this routine
File size: 30.7 KB

Line
1	!
2	! $Id$
3	!
4	!
5	MODULE add_phys_tend_mod
6
7	IMPLICIT NONE
8	! flag to compute diagnostics to check energy conservation. If fl_ebil==0, no check
9	INTEGER, SAVE :: fl_ebil
10	!$OMP THREADPRIVATE(fl_ebil)
11	! flag to include modifcations to ensure energy conservation. If fl_cor_ebil==0, no corrections
12	! Note that with time, all these modifications should be included by default
13	INTEGER, SAVE :: fl_cor_ebil
14	!$OMP THREADPRIVATE(fl_cor_ebil)
15
16	CONTAINS
17
18	SUBROUTINE add_pbl_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap)
19	! ======================================================================
20	! Ajoute les tendances de couche limite, soit determinees par la
21	! parametrisation
22	! physique, soit forcees, aux variables d etat de la dynamique t_seri,
23	! q_seri ...
24	! ======================================================================
25
26
27	! ======================================================================
28	! Declarations
29	! ======================================================================
30
31	USE dimphy, ONLY: klon, klev
32	! USE dimphy
33	USE phys_local_var_mod
34	USE phys_state_var_mod
35	USE mod_grid_phy_lmdz, ONLY: nbp_lev
36	IMPLICIT NONE
37	REAL,SAVE,ALLOCATABLE :: hthturb_gcssold(:)
38	REAL,SAVE,ALLOCATABLE :: hqturb_gcssold(:)
39	!$OMP THREADPRIVATE(hthturb_gcssold,hqturb_gcssold)
40	REAL,SAVE :: dtime_frcg
41	LOGICAL,SAVE :: turb_fcg_gcssold
42	LOGICAL,SAVE :: firstcall=.true.
43	!$OMP THREADPRIVATE(firstcall,turb_fcg_gcssold,dtime_frcg)
44	INTEGER abortphy
45	! COMMON /turb_forcing/dtime_frcg, hthturb_gcssold, hqturb_gcssold, &
46	! turb_fcg_gcssold
47
48	! Arguments :
49	! ------------
50	REAL zdu(klon, klev), zdv(klon, klev)
51	REAL zdt(klon, klev), zdq(klon, klev), zdql(klon, klev), zdqi(klon, klev), zdqbs(klon,klev)
52	CHARACTER () text
53	REAL paprs(klon,klev+1)
54	INTEGER flag_inhib_tend ! if flag_inhib_tend != 0, tendencies are not added
55	INTEGER itap ! time step number
56
57	! Local :
58	! --------
59	REAL zzdt(klon, klev), zzdq(klon, klev)
60	INTEGER i, k
61
62	IF (firstcall) THEN
63	ALLOCATE(hthturb_gcssold(nbp_lev))
64	ALLOCATE(hqturb_gcssold(nbp_lev))
65	firstcall=.false.
66	ENDIF
67
68	IF (turb_fcg_gcssold) THEN
69	DO k = 1, klev
70	DO i = 1, klon
71	zzdt(i, k) = hthturb_gcssold(k)*dtime_frcg
72	zzdq(i, k) = hqturb_gcssold(k)*dtime_frcg
73	ENDDO
74	ENDDO
75	PRINT *, ' add_pbl_tend, dtime_frcg ', dtime_frcg
76	PRINT *, ' add_pbl_tend, zzdt ', zzdt
77	PRINT *, ' add_pbl_tend, zzdq ', zzdq
78	CALL add_phys_tend(zdu, zdv, zzdt, zzdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0)
79	ELSE
80	CALL add_phys_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0)
81	ENDIF
82
83	RETURN
84	END SUBROUTINE add_pbl_tend
85	!
86	! $Id: add_phys_tend.F90 2611 2016-08-03 15:41:26Z jyg $
87	!
88	SUBROUTINE add_phys_tend (zdu,zdv,zdt,zdq,zdql,zdqi,zdqbs,paprs,text, &
89	abortphy,flag_inhib_tend, itap, diag_mode)
90	!======================================================================
91	! Ajoute les tendances des variables physiques aux variables
92	! d'etat de la dynamique t_seri, q_seri ...
93	! On en profite pour faire des tests sur les tendances en question.
94	!======================================================================
95
96
97	!======================================================================
98	! Declarations
99	!======================================================================
100
101	USE dimphy, ONLY: klon, klev
102	USE phys_state_var_mod, ONLY : phys_tstep
103	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri
104	USE phys_state_var_mod, ONLY: ftsol
105	USE geometry_mod, ONLY: longitude_deg, latitude_deg
106	USE print_control_mod, ONLY: prt_level
107	USE cmp_seri_mod
108	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
109	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
110	IMPLICIT none
111	INCLUDE "YOMCST.h"
112	INCLUDE "clesphys.h"
113
114	! Arguments :
115	!------------
116	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdu, zdv
117	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdt, zdql, zdqi, zdqbs
118	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
119	CHARACTER(), INTENT(IN) :: text
120	INTEGER, INTENT(IN) :: abortphy
121	INTEGER, INTENT(IN) :: flag_inhib_tend ! if not 0, tendencies are not added
122	INTEGER, INTENT(IN) :: itap ! time step number
123	INTEGER, INTENT(IN) :: diag_mode ! 0 -> normal effective mode
124	! 1 -> only conservation stats are computed
125	!
126	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: zdq
127
128	! Local :
129	!--------
130	REAL zt,zq
131	REAL zq_int, zqp_int, zq_new
132
133	REAL zqp(klev)
134
135	! Save variables, used in diagnostic mode (diag_mode=1).
136	REAL, DIMENSION(klon,klev) :: sav_u_seri, sav_v_seri
137	REAL, DIMENSION(klon,klev) :: sav_ql_seri, sav_qs_seri, sav_qbs_seri, sav_q_seri
138	REAL, DIMENSION(klon,klev) :: sav_t_seri
139	REAL, DIMENSION(klon,klev) :: sav_zdq
140	!
141	INTEGER i, k,j, n
142	INTEGER jadrs(klon*klev), jbad
143	INTEGER jqadrs(klon*klev), jqbad
144	INTEGER kadrs(klon*klev)
145	INTEGER kqadrs(klon*klev)
146
147	LOGICAL done(klon)
148
149	INTEGER debug_level
150	LOGICAL, SAVE :: first=.true.
151	!$OMP THREADPRIVATE(first)
152	!
153	!======================================================================
154	! Variables for energy conservation tests
155	!======================================================================
156	!
157
158	! zh_col------- total enthalpy of vertical air column
159	! (air with watter vapour, liquid and solid) (J/m2)
160	! zh_dair_col--- total enthalpy of dry air (J/m2)
161	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
162	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
163	! zh_qs_col---- total enthalpy of solid watter (J/m2)
164	! zh_qbs_col---- total enthalpy of blowing snow (J/m2)
165	! zqw_col------ total mass of watter vapour (kg/m2)
166	! zql_col------ total mass of liquid watter (kg/m2)
167	! zqs_col------ total mass of cloud ice (kg/m2)
168	! zqbs_col------ total mass of blowing snow (kg/m2)
169	! zek_col------ total kinetic energy (kg/m2)
170	!
171	REAL zairm(klon, klev) ! layer air mass (kg/m2)
172	REAL zqw_col(klon,2)
173	REAL zql_col(klon,2)
174	REAL zqs_col(klon,2)
175	REAL zqbs_col(klon,2)
176	REAL zek_col(klon,2)
177	REAL zh_dair_col(klon,2)
178	REAL zh_qw_col(klon,2), zh_ql_col(klon,2), zh_qs_col(klon,2), zh_qbs_col(klon,2)
179	REAL zh_col(klon,2)
180	REAL zcpvap, zcwat, zcice
181
182	!======================================================================
183	! Initialisations
184
185	IF (prt_level >= 5) THEN
186	write (,) "In add_phys_tend, after ",text
187	CALL flush
188	ENDIf
189
190	! if flag_inhib_tend != 0, tendencies are not added
191	IF (flag_inhib_tend /= 0) THEN
192	! If requiered, diagnostics are shown
193	IF (flag_inhib_tend > 0) THEN
194	! print some diagnostics if xxx_seri have changed
195	call cmp_seri(flag_inhib_tend,text)
196	ENDIF
197	RETURN ! on n ajoute pas les tendance
198	ENDIF
199
200	IF (abortphy==1) RETURN ! on n ajoute pas les tendance si le modele a deja plante.
201
202	debug_level=10
203	IF (first) THEN
204	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
205	first=.false.
206	ENDIF
207	!
208	! print *,'add_phys_tend: paprs ',paprs
209	! When in diagnostic mode, save initial values of out variables
210	IF (diag_mode == 1) THEN
211	sav_u_seri(:,:) = u_seri(:,:)
212	sav_v_seri(:,:) = v_seri(:,:)
213	sav_ql_seri(:,:) = ql_seri(:,:)
214	sav_qs_seri(:,:) = qs_seri(:,:)
215	sav_qbs_seri(:,:) = qbs_seri(:,:)
216	sav_q_seri(:,:) = q_seri(:,:)
217	sav_t_seri(:,:) = t_seri(:,:)
218	sav_zdq(:,:) = zdq(:,:)
219	ENDIF ! (diag_mode == 1)
220	!======================================================================
221	! Diagnostics for energy conservation tests
222	!======================================================================
223	DO k = 1, klev
224	! layer air mass
225	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
226	ENDDO
227
228	IF (fl_ebil .GT. 0) THEN
229	! ------------------------------------------------
230	! Compute vertical sum for each atmospheric column
231	! ------------------------------------------------
232	n=1 ! begining of time step
233
234	zcpvap = rcpv
235	zcwat = rcw
236	zcice = rcs
237
238	CALL integr_v(klon, klev, zcpvap, &
239	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
240	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
241	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
242
243	ENDIF ! endif (fl_ebil .GT. 0)
244
245	!======================================================================
246	! Ajout des tendances sur le vent et l'eau liquide
247	!======================================================================
248
249	u_seri(:,:)=u_seri(:,:)+zdu(:,:)
250	v_seri(:,:)=v_seri(:,:)+zdv(:,:)
251	ql_seri(:,:)=ql_seri(:,:)+zdql(:,:)
252	qs_seri(:,:)=qs_seri(:,:)+zdqi(:,:)
253	qbs_seri(:,:)=qbs_seri(:,:)+zdqbs(:,:)
254
255	!======================================================================
256	! On ajoute les tendances de la temperature et de la vapeur d'eau
257	! en verifiant que ca ne part pas dans les choux
258	!======================================================================
259
260	jbad=0
261	jqbad=0
262	DO k = 1, klev
263	DO i = 1, klon
264	zt=t_seri(i,k)+zdt(i,k)
265	zq=q_seri(i,k)+zdq(i,k)
266	IF ( zt>370. .or. zt<130. .or. abs(zdt(i,k))>50. ) THEN
267	jbad = jbad + 1
268	jadrs(jbad) = i
269	kadrs(jbad) = k
270	ENDIF
271	IF ( zq<0. .or. zq>0.1 .or. abs(zdq(i,k))>1.e-2 ) THEN
272	jqbad = jqbad + 1
273	jqadrs(jqbad) = i
274	kqadrs(jqbad) = k
275	ENDIF
276	t_seri(i,k)=zt
277	q_seri(i,k)=zq
278	ENDDO
279	ENDDO
280
281	!=====================================================================================
282	! Impression et stop en cas de probleme important
283	!=====================================================================================
284
285	IF (jbad .GT. 0) THEN
286	DO j = 1, jbad
287	i=jadrs(j)
288	IF (prt_level.ge.debug_level) THEN
289	print*,'PLANTAGE POUR LE POINT i lon lat =',&
290	i,longitude_deg(i),latitude_deg(i),text
291	print*,'l T dT Q dQ '
292	DO k = 1, klev
293	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
294	ENDDO
295	call print_debug_phys(i,debug_level,text)
296	ENDIF
297	ENDDO
298	ENDIF
299	!
300	!=====================================================================================
301	! Impression, warning et correction en cas de probleme moins important
302	!=====================================================================================
303	IF (jqbad .GT. 0) THEN
304	done(:) = .false. !jyg
305	DO j = 1, jqbad
306	i=jqadrs(j)
307	if(prt_level.ge.debug_level) THEN
308	print*,'WARNING : EAU POUR LE POINT i lon lat =',&
309	i,longitude_deg(i),latitude_deg(i),text
310	print*,'l T dT Q dQ '
311	DO k = 1, klev
312	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
313	ENDDO
314	ENDIF
315	IF (ok_conserv_q) THEN
316	!jyg<20140228 Corrections pour conservation de l'eau
317	IF (.NOT.done(i)) THEN !jyg
318	DO k = 1, klev
319	zqp(k) = max(q_seri(i,k),1.e-15)
320	ENDDO
321	zq_int = 0.
322	zqp_int = 0.
323	DO k = 1, klev
324	zq_int = zq_int + q_seri(i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
325	zqp_int = zqp_int + zqp(k) *(paprs(i,k)-paprs(i,k+1))/Rg
326	ENDDO
327	IF (prt_level.ge.debug_level) THEN
328	print*,' cas q_seri<1.e-15 i k zq_int zqp_int zq_int/zqp_int :', &
329	i, kqadrs(j), zq_int, zqp_int, zq_int/zqp_int
330	ENDIF
331	DO k = 1, klev
332	zq_new = zqp(k)*zq_int/zqp_int
333	zdq(i,k) = zdq(i,k) + zq_new - q_seri(i,k)
334	q_seri(i,k) = zq_new
335	ENDDO
336	done(i) = .true.
337	ENDIF !(.NOT.done(i))
338	ELSE
339	!jyg>
340	DO k = 1, klev
341	zq=q_seri(i,k)+zdq(i,k)
342	IF (zq.lt.1.e-15) THEN
343	IF (q_seri(i,k).lt.1.e-15) THEN
344	IF (prt_level.ge.debug_level) THEN
345	print*,' cas q_seri<1.e-15 i k q_seri zq zdq :',i,k,q_seri(i,k),zq,zdq(i,k)
346	ENDIF
347	q_seri(i,k)=1.e-15
348	zdq(i,k)=(1.e-15-q_seri(i,k))
349	ENDIF
350	ENDIF
351	! zq=q_seri(i,k)+zdq(i,k)
352	! if (zq.lt.1.e-15) THEN
353	! zdq(i,k)=(1.e-15-q_seri(i,k))
354	! endif
355	ENDDO
356	!jyg<20140228
357	ENDIF ! (ok_conserv_q)
358	!jyg>
359	ENDDO ! j = 1, jqbad
360	ENDIF
361	!
362
363	!IM ajout memes tests pour reverifier les jbad, jqbad beg
364	jbad=0
365	jqbad=0
366	DO k = 1, klev
367	DO i = 1, klon
368	IF ( t_seri(i,k)>370. .or. t_seri(i,k)<130. .or. abs(zdt(i,k))>50. ) THEN
369	jbad = jbad + 1
370	jadrs(jbad) = i
371	! if(prt_level.ge.debug_level) THEN
372	! print*,'cas2 i k t_seri zdt',i,k,t_seri(i,k),zdt(i,k)
373	! endif
374	ENDIF
375	IF ( q_seri(i,k)<0. .or. q_seri(i,k)>0.1 .or. abs(zdq(i,k))>1.e-2 ) THEN
376	jqbad = jqbad + 1
377	jqadrs(jqbad) = i
378	kqadrs(jqbad) = k
379	! if(prt_level.ge.debug_level) THEN
380	! print*,'cas2 i k q_seri zdq',i,k,q_seri(i,k),zdq(i,k)
381	! endif
382	ENDIF
383	ENDDO
384	ENDDO
385	IF (jbad .GT. 0) THEN
386	DO j = 1, jbad
387	i=jadrs(j)
388	k=kadrs(j)
389	if(prt_level.ge.debug_level) THEN
390	print*,'PLANTAGE2 POUR LE POINT i itap lon lat txt jbad zdt t',&
391	i,itap,longitude_deg(i),latitude_deg(i),text,jbad, &
392	& zdt(i,k),t_seri(i,k)-zdt(i,k)
393	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
394	print*,'l T dT Q dQ '
395	DO k = 1, klev
396	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
397	ENDDO
398	call print_debug_phys(i,debug_level,text)
399	ENDIF
400	ENDDO
401	ENDIF
402	!
403	IF (jqbad .GT. 0) THEN
404	DO j = 1, jqbad
405	i=jqadrs(j)
406	k=kqadrs(j)
407	IF (prt_level.ge.debug_level) THEN
408	print*,'WARNING : EAU2 POUR LE POINT i itap lon lat txt jqbad zdq q zdql ql',&
409	i,itap,longitude_deg(i),latitude_deg(i),text,jqbad,&
410	& zdq(i,k), q_seri(i,k)-zdq(i,k), zdql(i,k), ql_seri(i,k)-zdql(i,k)
411	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
412	print*,'l T dT Q dQ '
413	DO k = 1, klev
414	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
415	ENDDO
416	call print_debug_phys(i,debug_level,text)
417	ENDIF
418	ENDDO
419	ENDIF
420
421	!======================================================================
422	! Contrôle des min/max pour arrêt du modèle
423	! Si le modele est en mode abortphy, on retire les tendances qu'on
424	! vient d'ajouter. Pas exactement parce qu'on ne tient pas compte des
425	! seuils.
426	!======================================================================
427
428	CALL hgardfou(t_seri,ftsol,text,abortphy)
429	IF (abortphy==1) THEN
430	print*,'ERROR ABORT hgardfou dans ',text
431	! JLD pourquoi on ne modifie pas de meme t_seri et q_seri ?
432	u_seri(:,:)=u_seri(:,:)-zdu(:,:)
433	v_seri(:,:)=v_seri(:,:)-zdv(:,:)
434	ql_seri(:,:)=ql_seri(:,:)-zdql(:,:)
435	qs_seri(:,:)=qs_seri(:,:)-zdqi(:,:)
436	qbs_seri(:,:)=qbs_seri(:,:)-zdqbs(:,:)
437	ENDIF
438
439	!======================================================================
440	! Diagnostics for energy conservation tests
441	!======================================================================
442
443	IF (fl_ebil .GT. 0) THEn
444
445	! ------------------------------------------------
446	! Compute vertical sum for each atmospheric column
447	! ------------------------------------------------
448	n=2 ! end of time step
449
450	CALL integr_v(klon, klev, zcpvap, &
451	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
452	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
453	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
454
455	! ------------------------------------------------
456	! Compute the changes by unit of time
457	! ------------------------------------------------
458
459	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
460	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
461	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
462	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
463	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
464
465	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
466
467	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
468	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
469	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
470	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
471	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
472
473	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
474
475	ENDIF ! endif (fl_ebil .GT. 0)
476	!
477	! When in diagnostic mode, restore "out" variables to initial values.
478	IF (diag_mode == 1) THEN
479	u_seri(:,:) = sav_u_seri(:,:)
480	v_seri(:,:) = sav_v_seri(:,:)
481	ql_seri(:,:) = sav_ql_seri(:,:)
482	qs_seri(:,:) = sav_qs_seri(:,:)
483	qbs_seri(:,:) = sav_qbs_seri(:,:)
484	q_seri(:,:) = sav_q_seri(:,:)
485	t_seri(:,:) = sav_t_seri(:,:)
486	zdq(:,:) = sav_zdq(:,:)
487	ENDIF ! (mode == 1)
488
489	RETURN
490	END SUBROUTINE add_phys_tend
491
492	SUBROUTINE diag_phys_tend (nlon, nlev, uu, vv, temp, qv, ql, qs, qbs, &
493	zdu,zdv,zdt,zdq,zdql,zdqs,zdqbs,paprs,text)
494	!======================================================================
495	! Ajoute les tendances des variables physiques aux variables
496	! d'etat de la dynamique t_seri, q_seri ...
497	! On en profite pour faire des tests sur les tendances en question.
498	!======================================================================
499
500
501	!======================================================================
502	! Declarations
503	!======================================================================
504
505	USE phys_state_var_mod, ONLY : phys_tstep, ftsol
506	USE geometry_mod, ONLY: longitude_deg, latitude_deg
507	USE print_control_mod, ONLY: prt_level
508	USE cmp_seri_mod
509	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
510	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
511	IMPLICIT none
512	include "YOMCST.h"
513	include "clesphys.h"
514
515	! Arguments :
516	!------------
517	INTEGER, INTENT(IN) :: nlon, nlev
518	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: uu, vv
519	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs
520	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdu, zdv
521	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdt, zdq, zdql, zdqs, zdqbs
522	REAL, DIMENSION(nlon,nlev+1), INTENT(IN) :: paprs
523	CHARACTER(), INTENT(IN) :: text
524
525	! Local :
526	!--------
527	REAL, DIMENSION(nlon,nlev) :: uu_n, vv_n
528	REAL, DIMENSION(nlon,nlev) :: temp_n, qv_n, ql_n, qs_n, qbs_n
529	!
530	INTEGER k, n
531
532	INTEGER debug_level
533	LOGICAL, SAVE :: first=.true.
534	!$OMP THREADPRIVATE(first)
535	!
536	!======================================================================
537	! Variables for energy conservation tests
538	!======================================================================
539	!
540
541	! zh_col------- total enthalpy of vertical air column
542	! (air with watter vapour, liquid and solid) (J/m2)
543	! zh_dair_col--- total enthalpy of dry air (J/m2)
544	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
545	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
546	! zh_qs_col---- total enthalpy of solid watter (J/m2)
547	! zqw_col------ total mass of watter vapour (kg/m2)
548	! zql_col------ total mass of liquid watter (kg/m2)
549	! zqs_col------ total mass of cloud ice (kg/m2)
550	! zqbs_col------ total mass of blowing snow (kg/m2)
551	! zek_col------ total kinetic energy (kg/m2)
552	!
553	REAL zairm(nlon, nlev) ! layer air mass (kg/m2)
554	REAL zqw_col(nlon,2)
555	REAL zql_col(nlon,2)
556	REAL zqs_col(nlon,2)
557	REAL zqbs_col(nlon,2)
558	REAL zek_col(nlon,2)
559	REAL zh_dair_col(nlon,2)
560	REAL zh_qw_col(nlon,2), zh_ql_col(nlon,2), zh_qs_col(nlon,2), zh_qbs_col(nlon,2)
561	REAL zh_col(nlon,2)
562
563	!======================================================================
564	! Initialisations
565
566	IF (prt_level >= 5) THEN
567	write (,) "In diag_phys_tend, after ",text
568	CALL flush
569	ENDIF
570
571	debug_level=10
572	IF (first) THEN
573	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
574	first=.false.
575	ENDIF
576	!
577	! print *,'add_phys_tend: paprs ',paprs
578	!======================================================================
579	! Diagnostics for energy conservation tests
580	!======================================================================
581	DO k = 1, nlev
582	! layer air mass
583	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
584	ENDDO
585
586	IF (fl_ebil .GT. 0) THEN
587	! ------------------------------------------------
588	! Compute vertical sum for each atmospheric column
589	! ------------------------------------------------
590	n=1 ! begining of time step
591
592	CALL integr_v(nlon, nlev, rcpv, &
593	temp, qv, ql, qs, qbs, uu, vv, zairm, &
594	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
595	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
596
597	ENDIF ! endif (fl_ebil .GT. 0)
598
599	!======================================================================
600	! Ajout des tendances sur le vent, la temperature et les diverses phases de l'eau
601	!======================================================================
602
603	uu_n(:,:)=uu(:,:)+zdu(:,:)
604	vv_n(:,:)=vv(:,:)+zdv(:,:)
605	qv_n(:,:)=qv(:,:)+zdq(:,:)
606	ql_n(:,:)=ql(:,:)+zdql(:,:)
607	qs_n(:,:)=qs(:,:)+zdqs(:,:)
608	qbs_n(:,:)=qbs(:,:)+zdqbs(:,:)
609	temp_n(:,:)=temp(:,:)+zdt(:,:)
610
611	!======================================================================
612	! Diagnostics for energy conservation tests
613	!======================================================================
614
615	IF (fl_ebil .GT. 0) THEN
616
617	! ------------------------------------------------
618	! Compute vertical sum for each atmospheric column
619	! ------------------------------------------------
620	n=2 ! end of time step
621
622	CALL integr_v(nlon, nlev, rcpv, &
623	temp_n, qv_n, ql_n, qs_n, qbs_n, uu_n, vv_n, zairm, &
624	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
625	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
626
627	! ------------------------------------------------
628	! Compute the changes by unit of time
629	! ------------------------------------------------
630
631	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
632	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
633	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
634	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
635	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
636
637	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
638
639	print *,'zdu ', zdu
640	print *,'zdv ', zdv
641	print *,'d_ek_col, zek_col(2), zek_col(1) ',d_ek_col(1), zek_col(1,2), zek_col(1,1)
642
643	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
644	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
645	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
646	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
647	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
648
649	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
650
651	ENDIF ! endif (fl_ebil .GT. 0)
652	!
653
654	RETURN
655	END SUBROUTINE diag_phys_tend
656
657	SUBROUTINE integr_v(nlon, nlev, zcpvap, &
658	temp, qv, ql, qs, qbs, uu, vv, zairm, &
659	zqw_col, zql_col, zqs_col, zqbs_col, zek_col, zh_dair_col, &
660	zh_qw_col, zh_ql_col, zh_qs_col, zh_qbs_col, zh_col)
661
662	IMPLICIT none
663	INCLUDE "YOMCST.h"
664
665	INTEGER, INTENT(IN) :: nlon,nlev
666	REAL, INTENT(IN) :: zcpvap
667	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs, uu, vv
668	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zairm
669	REAL, DIMENSION(nlon), INTENT(OUT) :: zqw_col
670	REAL, DIMENSION(nlon), INTENT(OUT) :: zql_col
671	REAL, DIMENSION(nlon), INTENT(OUT) :: zqs_col, zqbs_col
672	REAL, DIMENSION(nlon), INTENT(OUT) :: zek_col
673	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_dair_col
674	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qw_col
675	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_ql_col
676	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qs_col, zh_qbs_col
677	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_col
678
679	INTEGER :: i, k
680
681	! Reset variables
682	zqw_col(:) = 0.
683	zql_col(:) = 0.
684	zqs_col(:) = 0.
685	zqbs_col(:) = 0.
686	zek_col(:) = 0.
687	zh_dair_col(:) = 0.
688	zh_qw_col(:) = 0.
689	zh_ql_col(:) = 0.
690	zh_qs_col(:) = 0.
691	zh_qbs_col(:) = 0.
692
693	!JLD write (,) "rcpd, zcpvap, zcwat, zcice ",rcpd, zcpvap, zcwat, zcice
694
695	! ------------------------------------------------
696	! Compute vertical sum for each atmospheric column
697	! ------------------------------------------------
698	DO k = 1, nlev
699	DO i = 1, nlon
700	! Watter mass
701	zqw_col(i) = zqw_col(i) + qv(i, k)*zairm(i, k)
702	zql_col(i) = zql_col(i) + ql(i, k)*zairm(i, k)
703	zqs_col(i) = zqs_col(i) + qs(i, k)*zairm(i, k)
704	zqbs_col(i)= zqbs_col(i) + qbs(i,k)*zairm(i,k)
705	! Kinetic Energy
706	zek_col(i) = zek_col(i) + 0.5(uu(i,k)2+vv(i,k)2)zairm(i, k)
707	! Air enthalpy : dry air, water vapour, liquid, solid
708	zh_dair_col(i) = zh_dair_col(i) + rcpd(1.-qv(i,k)-ql(i,k)-qs(i,k)) &
709	zairm(i, k)*temp(i, k)
710	zh_qw_col(i) = zh_qw_col(i) + zcpvaptemp(i, k) qv(i, k)*zairm(i, k) !jyg
711	zh_ql_col(i) = zh_ql_col(i) + (zcpvaptemp(i, k) - rlvtt)ql(i, k)*zairm(i, k) !jyg
712	zh_qs_col(i) = zh_qs_col(i) + (zcpvaptemp(i, k) - rlstt)qs(i, k)*zairm(i, k) !jyg
713	zh_qbs_col(i) = zh_qbs_col(i) + (zcpvaptemp(i, k) - rlstt)qbs(i, k)*zairm(i, k) !jyg
714	ENDDO
715	ENDDO
716	! compute total air enthalpy
717	zh_col(:) = zh_dair_col(:) + zh_qw_col(:) + zh_ql_col(:) + zh_qs_col(:) + zh_qbs_col(:)
718
719	END SUBROUTINE integr_v
720
721	SUBROUTINE prt_enerbil (text, itap)
722	!======================================================================
723	! Print enenrgy budget diagnotics for the 1D case
724	!======================================================================
725
726	!======================================================================
727	! Declarations
728	!======================================================================
729
730	USE dimphy, ONLY: klon, klev
731	USE phys_state_var_mod, ONLY : phys_tstep
732	USE phys_state_var_mod, ONLY : topsw, toplw, solsw, sollw, rain_con, snow_con, bs_fall
733	USE geometry_mod, ONLY: longitude_deg, latitude_deg
734	USE print_control_mod, ONLY: prt_level
735	USE cmp_seri_mod
736	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
737	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
738	USE phys_local_var_mod, ONLY: evap, sens
739	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri &
740	& , rain_lsc, snow_lsc
741	USE climb_hq_mod, ONLY : d_h_col_vdf, f_h_bnd
742	IMPLICIT none
743	INCLUDE "YOMCST.h"
744
745	! Arguments :
746	!------------
747	CHARACTER() text ! text specifing the involved parametrization
748	INTEGER itap ! time step number
749	! local variables
750	! ---------------
751	REAL bilq_seuil, bilh_seuil ! thresold on error in Q and H budget
752	REAL bilq_error, bilh_error ! erros in Q and H budget
753	REAL bilq_bnd, bilh_bnd ! Q and H budget due to exchange with boundaries
754	INTEGER bilq_ok, bilh_ok
755	CHARACTER*(12) status
756
757	bilq_seuil = 1.E-10
758	bilh_seuil = 1.E-1
759	bilq_ok=0
760	bilh_ok=0
761
762	!!print *,'prt_level:',prt_level,' fl_ebil:',fl_ebil,' fl_cor_ebil:',fl_cor_ebil
763	IF ((fl_ebil .GT. 0) .AND. (klon .EQ. 1)) THEN
764
765	bilq_bnd = 0.
766	bilh_bnd = 0.
767
768	param: SELECT CASE (text)
769	CASE("vdf") param
770	bilq_bnd = evap(1)
771	bilh_bnd = sens(1)+(rcpv-rcpd)evap(1)t_seri(1,1)
772	CASE("lsc") param
773	bilq_bnd = - rain_lsc(1) - snow_lsc(1)
774	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_lsc(1) &
775	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_lsc(1)
776	CASE("bs") param
777	bilq_bnd = - bs_fall(1)
778	bilh_bnd = (-(rcs-rcpd)t_seri(1,1) + rlstt) bs_fall(1)
779	CASE("convection") param
780	bilq_bnd = - rain_con(1) - snow_con(1)
781	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_con(1) &
782	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_con(1)
783	CASE("SW") param
784	bilh_bnd = topsw(1) - solsw(1)
785	CASE("LW") param
786	bilh_bnd = -(toplw(1) + sollw(1))
787	CASE DEFAULT param
788	bilq_bnd = 0.
789	bilh_bnd = 0.
790	END SELECT param
791
792	bilq_error = d_qt_col(1) - bilq_bnd
793	bilh_error = d_h_col(1) - bilh_bnd
794	! are the errors too large?
795	IF (abs(bilq_error) .GT. bilq_seuil) bilq_ok=1
796	IF (abs(bilh_error) .GT. bilh_seuil) bilh_ok=1
797	!
798	! Print diagnostics
799	! =================
800	IF ( (bilq_ok .eq. 0).AND.(bilh_ok .eq. 0) ) THEN
801	status="enerbil-OK"
802	ELSE
803	status="enerbil-PB"
804	ENDIF
805
806	IF (prt_level .GE. 3) THEN
807	write(*,9010) text,status," itap:",itap,"enerbilERROR: Q", bilq_error," H", bilh_error
808	9010 format (1x,A8,2x,A12,A6,I4,A18,E15.6,A5,E15.6)
809	ENDIF
810	IF (prt_level .GE. 3) THEN
811	write(*,9000) text,"enerbil: Q,H,KE budget", d_qt_col(1), d_h_col(1),d_ek_col(1)
812	ENDIF
813	IF (prt_level .GE. 5) THEN
814	write(*,9000) text,"enerbil at boundaries: Q, H",bilq_bnd, bilh_bnd
815	write(*,9000) text,"enerbil: water budget",d_qt_col(1),d_qw_col(1),d_ql_col(1),d_qs_col(1), d_qbs_col(1)
816	write(*,9000) text,"enerbil: enthalpy budget",d_h_col(1),d_h_dair_col(1),d_h_qw_col(1),d_h_ql_col(1),d_h_qs_col(1),d_h_qbs_col(1)
817	ENDIF
818
819	specific_diag: SELECT CASE (text)
820	CASE("vdf") specific_diag
821	IF (prt_level .GE. 5) THEN
822	write(*,9000) text,"enerbil: d_h, bilh, sens,t_seri", d_h_col(1), bilh_bnd, sens(1), t_seri(1,1)
823	write(*,9000) text,"enerbil: d_h_col_vdf, f_h, diff",d_h_col_vdf, f_h_bnd, bilh_bnd-sens(1)
824	ENDIF
825	CASE("lsc") specific_diag
826	IF (prt_level .GE. 5) THEN
827	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_lsc(1), rlvtt rain_lsc(1), -(rcw-rcpd)t_seri(1,1) rain_lsc(1)
828	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_lsc(1), rlstt snow_lsc(1), -(rcs-rcpd)t_seri(1,1) snow_lsc(1)
829	ENDIF
830	CASE("convection") specific_diag
831	IF (prt_level .GE. 5) THEN
832	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_con(1), rlvtt rain_con(1), -(rcw-rcpd)t_seri(1,1) rain_con(1)
833	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_con(1), rlstt snow_con(1), -(rcs-rcpd)t_seri(1,1) snow_con(1)
834	ENDIF
835	END SELECT specific_diag
836
837	9000 FORMAT(1x,A8,2x,A35,10E15.6)
838
839	ENDIF ! endif (fl_ebil .GT. 0)
840
841	END SUBROUTINE prt_enerbil
842
843	END MODULE add_phys_tend_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format