Context Navigation

add_phys_tend_mod.F90 @ 5134

Last change on this file since 5134 was 5051, checked in by evignon, 5 months ago
petit changement dans add_phys_tend suite au renommage des tendances de neige soufflee
File size: 30.7 KB

Rev	Line
[2800]	1	!
[3435]	2	! $Id$
	3	!
	4	!
[2800]	5	MODULE add_phys_tend_mod
	6
	7	IMPLICIT NONE
	8	! flag to compute diagnostics to check energy conservation. If fl_ebil==0, no check
	9	INTEGER, SAVE :: fl_ebil
	10	!$OMP THREADPRIVATE(fl_ebil)
	11	! flag to include modifcations to ensure energy conservation. If fl_cor_ebil==0, no corrections
	12	! Note that with time, all these modifications should be included by default
	13	INTEGER, SAVE :: fl_cor_ebil
	14	!$OMP THREADPRIVATE(fl_cor_ebil)
	15
	16	CONTAINS
	17
[4523]	18	SUBROUTINE add_pbl_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap)
[2800]	19	! ======================================================================
	20	! Ajoute les tendances de couche limite, soit determinees par la
	21	! parametrisation
	22	! physique, soit forcees, aux variables d etat de la dynamique t_seri,
	23	! q_seri ...
	24	! ======================================================================
	25
	26
	27	! ======================================================================
	28	! Declarations
	29	! ======================================================================
	30
	31	USE dimphy, ONLY: klon, klev
	32	! USE dimphy
	33	USE phys_local_var_mod
	34	USE phys_state_var_mod
	35	USE mod_grid_phy_lmdz, ONLY: nbp_lev
	36	IMPLICIT NONE
	37	REAL,SAVE,ALLOCATABLE :: hthturb_gcssold(:)
	38	REAL,SAVE,ALLOCATABLE :: hqturb_gcssold(:)
	39	!$OMP THREADPRIVATE(hthturb_gcssold,hqturb_gcssold)
	40	REAL,SAVE :: dtime_frcg
	41	LOGICAL,SAVE :: turb_fcg_gcssold
	42	LOGICAL,SAVE :: firstcall=.true.
	43	!$OMP THREADPRIVATE(firstcall,turb_fcg_gcssold,dtime_frcg)
	44	INTEGER abortphy
	45	! COMMON /turb_forcing/dtime_frcg, hthturb_gcssold, hqturb_gcssold, &
	46	! turb_fcg_gcssold
	47
	48	! Arguments :
	49	! ------------
	50	REAL zdu(klon, klev), zdv(klon, klev)
[4523]	51	REAL zdt(klon, klev), zdq(klon, klev), zdql(klon, klev), zdqi(klon, klev), zdqbs(klon,klev)
[2800]	52	CHARACTER () text
	53	REAL paprs(klon,klev+1)
	54	INTEGER flag_inhib_tend ! if flag_inhib_tend != 0, tendencies are not added
	55	INTEGER itap ! time step number
	56
	57	! Local :
	58	! --------
	59	REAL zzdt(klon, klev), zzdq(klon, klev)
	60	INTEGER i, k
	61
	62	IF (firstcall) THEN
	63	ALLOCATE(hthturb_gcssold(nbp_lev))
	64	ALLOCATE(hqturb_gcssold(nbp_lev))
	65	firstcall=.false.
	66	ENDIF
	67
	68	IF (turb_fcg_gcssold) THEN
	69	DO k = 1, klev
	70	DO i = 1, klon
	71	zzdt(i, k) = hthturb_gcssold(k)*dtime_frcg
	72	zzdq(i, k) = hqturb_gcssold(k)*dtime_frcg
[4738]	73	ENDDO
	74	ENDDO
[2800]	75	PRINT *, ' add_pbl_tend, dtime_frcg ', dtime_frcg
	76	PRINT *, ' add_pbl_tend, zzdt ', zzdt
	77	PRINT *, ' add_pbl_tend, zzdq ', zzdq
[4523]	78	CALL add_phys_tend(zdu, zdv, zzdt, zzdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0)
[2800]	79	ELSE
[4523]	80	CALL add_phys_tend(zdu, zdv, zdt, zdq, zdql, zdqi, zdqbs, paprs, text,abortphy,flag_inhib_tend, itap, 0)
[4738]	81	ENDIF
[2800]	82
	83	RETURN
	84	END SUBROUTINE add_pbl_tend
	85	!
	86	! $Id: add_phys_tend.F90 2611 2016-08-03 15:41:26Z jyg $
	87	!
[4523]	88	SUBROUTINE add_phys_tend (zdu,zdv,zdt,zdq,zdql,zdqi,zdqbs,paprs,text, &
[2812]	89	abortphy,flag_inhib_tend, itap, diag_mode)
[2800]	90	!======================================================================
	91	! Ajoute les tendances des variables physiques aux variables
	92	! d'etat de la dynamique t_seri, q_seri ...
	93	! On en profite pour faire des tests sur les tendances en question.
	94	!======================================================================
	95
	96
	97	!======================================================================
	98	! Declarations
	99	!======================================================================
	100
	101	USE dimphy, ONLY: klon, klev
[3435]	102	USE phys_state_var_mod, ONLY : phys_tstep
[4523]	103	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri
[2800]	104	USE phys_state_var_mod, ONLY: ftsol
	105	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	106	USE print_control_mod, ONLY: prt_level
	107	USE cmp_seri_mod
[4523]	108	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	109	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[2800]	110	IMPLICIT none
[4738]	111	INCLUDE "YOMCST.h"
	112	INCLUDE "clesphys.h"
[2800]	113
	114	! Arguments :
	115	!------------
[2812]	116	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdu, zdv
[4523]	117	REAL, DIMENSION(klon,klev), INTENT(IN) :: zdt, zdql, zdqi, zdqbs
[2812]	118	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
	119	CHARACTER(), INTENT(IN) :: text
	120	INTEGER, INTENT(IN) :: abortphy
	121	INTEGER, INTENT(IN) :: flag_inhib_tend ! if not 0, tendencies are not added
	122	INTEGER, INTENT(IN) :: itap ! time step number
	123	INTEGER, INTENT(IN) :: diag_mode ! 0 -> normal effective mode
	124	! 1 -> only conservation stats are computed
	125	!
	126	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: zdq
[2800]	127
	128	! Local :
	129	!--------
	130	REAL zt,zq
	131	REAL zq_int, zqp_int, zq_new
	132
	133	REAL zqp(klev)
	134
[2812]	135	! Save variables, used in diagnostic mode (diag_mode=1).
	136	REAL, DIMENSION(klon,klev) :: sav_u_seri, sav_v_seri
[4523]	137	REAL, DIMENSION(klon,klev) :: sav_ql_seri, sav_qs_seri, sav_qbs_seri, sav_q_seri
[2812]	138	REAL, DIMENSION(klon,klev) :: sav_t_seri
	139	REAL, DIMENSION(klon,klev) :: sav_zdq
	140	!
[2800]	141	INTEGER i, k,j, n
	142	INTEGER jadrs(klon*klev), jbad
	143	INTEGER jqadrs(klon*klev), jqbad
	144	INTEGER kadrs(klon*klev)
	145	INTEGER kqadrs(klon*klev)
	146
	147	LOGICAL done(klon)
	148
[4738]	149	INTEGER debug_level
	150	LOGICAL, SAVE :: first=.true.
[2800]	151	!$OMP THREADPRIVATE(first)
	152	!
	153	!======================================================================
	154	! Variables for energy conservation tests
	155	!======================================================================
	156	!
	157
	158	! zh_col------- total enthalpy of vertical air column
	159	! (air with watter vapour, liquid and solid) (J/m2)
	160	! zh_dair_col--- total enthalpy of dry air (J/m2)
	161	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
	162	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
	163	! zh_qs_col---- total enthalpy of solid watter (J/m2)
[4523]	164	! zh_qbs_col---- total enthalpy of blowing snow (J/m2)
[2800]	165	! zqw_col------ total mass of watter vapour (kg/m2)
	166	! zql_col------ total mass of liquid watter (kg/m2)
[4523]	167	! zqs_col------ total mass of cloud ice (kg/m2)
	168	! zqbs_col------ total mass of blowing snow (kg/m2)
[2800]	169	! zek_col------ total kinetic energy (kg/m2)
	170	!
	171	REAL zairm(klon, klev) ! layer air mass (kg/m2)
	172	REAL zqw_col(klon,2)
	173	REAL zql_col(klon,2)
	174	REAL zqs_col(klon,2)
[4523]	175	REAL zqbs_col(klon,2)
[2800]	176	REAL zek_col(klon,2)
	177	REAL zh_dair_col(klon,2)
[4523]	178	REAL zh_qw_col(klon,2), zh_ql_col(klon,2), zh_qs_col(klon,2), zh_qbs_col(klon,2)
[2800]	179	REAL zh_col(klon,2)
	180	REAL zcpvap, zcwat, zcice
	181
	182	!======================================================================
	183	! Initialisations
	184
[4738]	185	IF (prt_level >= 5) THEN
	186	write (,) "In add_phys_tend, after ",text
	187	CALL flush
	188	ENDIf
[2800]	189
[4738]	190	! if flag_inhib_tend != 0, tendencies are not added
	191	IF (flag_inhib_tend /= 0) THEN
	192	! If requiered, diagnostics are shown
	193	IF (flag_inhib_tend > 0) THEN
	194	! print some diagnostics if xxx_seri have changed
	195	call cmp_seri(flag_inhib_tend,text)
	196	ENDIF
	197	RETURN ! on n ajoute pas les tendance
	198	ENDIF
[2800]	199
[4738]	200	IF (abortphy==1) RETURN ! on n ajoute pas les tendance si le modele a deja plante.
[2800]	201
[4738]	202	debug_level=10
	203	IF (first) THEN
	204	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
	205	first=.false.
	206	ENDIF
[2812]	207	!
	208	! print *,'add_phys_tend: paprs ',paprs
	209	! When in diagnostic mode, save initial values of out variables
	210	IF (diag_mode == 1) THEN
	211	sav_u_seri(:,:) = u_seri(:,:)
	212	sav_v_seri(:,:) = v_seri(:,:)
	213	sav_ql_seri(:,:) = ql_seri(:,:)
	214	sav_qs_seri(:,:) = qs_seri(:,:)
[4523]	215	sav_qbs_seri(:,:) = qbs_seri(:,:)
[2812]	216	sav_q_seri(:,:) = q_seri(:,:)
	217	sav_t_seri(:,:) = t_seri(:,:)
	218	sav_zdq(:,:) = zdq(:,:)
	219	ENDIF ! (diag_mode == 1)
[2800]	220	!======================================================================
	221	! Diagnostics for energy conservation tests
	222	!======================================================================
	223	DO k = 1, klev
	224	! layer air mass
	225	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
[4738]	226	ENDDO
[2800]	227
[4738]	228	IF (fl_ebil .GT. 0) THEN
[2800]	229	! ------------------------------------------------
	230	! Compute vertical sum for each atmospheric column
	231	! ------------------------------------------------
	232	n=1 ! begining of time step
	233
[2848]	234	zcpvap = rcpv
	235	zcwat = rcw
	236	zcice = rcs
	237
	238	CALL integr_v(klon, klev, zcpvap, &
[4523]	239	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
	240	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	241	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[2848]	242
[4738]	243	ENDIF ! endif (fl_ebil .GT. 0)
[2800]	244
	245	!======================================================================
	246	! Ajout des tendances sur le vent et l'eau liquide
	247	!======================================================================
	248
[4738]	249	u_seri(:,:)=u_seri(:,:)+zdu(:,:)
	250	v_seri(:,:)=v_seri(:,:)+zdv(:,:)
	251	ql_seri(:,:)=ql_seri(:,:)+zdql(:,:)
	252	qs_seri(:,:)=qs_seri(:,:)+zdqi(:,:)
	253	qbs_seri(:,:)=qbs_seri(:,:)+zdqbs(:,:)
[2800]	254
	255	!======================================================================
	256	! On ajoute les tendances de la temperature et de la vapeur d'eau
	257	! en verifiant que ca ne part pas dans les choux
	258	!======================================================================
	259
[4738]	260	jbad=0
	261	jqbad=0
	262	DO k = 1, klev
	263	DO i = 1, klon
	264	zt=t_seri(i,k)+zdt(i,k)
	265	zq=q_seri(i,k)+zdq(i,k)
	266	IF ( zt>370. .or. zt<130. .or. abs(zdt(i,k))>50. ) THEN
	267	jbad = jbad + 1
	268	jadrs(jbad) = i
	269	kadrs(jbad) = k
	270	ENDIF
	271	IF ( zq<0. .or. zq>0.1 .or. abs(zdq(i,k))>1.e-2 ) THEN
	272	jqbad = jqbad + 1
	273	jqadrs(jqbad) = i
	274	kqadrs(jqbad) = k
	275	ENDIF
	276	t_seri(i,k)=zt
	277	q_seri(i,k)=zq
	278	ENDDO
	279	ENDDO
[2800]	280
	281	!=====================================================================================
	282	! Impression et stop en cas de probleme important
	283	!=====================================================================================
	284
[4738]	285	IF (jbad .GT. 0) THEN
	286	DO j = 1, jbad
	287	i=jadrs(j)
	288	IF (prt_level.ge.debug_level) THEN
[2800]	289	print*,'PLANTAGE POUR LE POINT i lon lat =',&
	290	i,longitude_deg(i),latitude_deg(i),text
	291	print*,'l T dT Q dQ '
	292	DO k = 1, klev
	293	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	294	ENDDO
	295	call print_debug_phys(i,debug_level,text)
[4738]	296	ENDIF
	297	ENDDO
	298	ENDIF
[2800]	299	!
	300	!=====================================================================================
	301	! Impression, warning et correction en cas de probleme moins important
	302	!=====================================================================================
[4738]	303	IF (jqbad .GT. 0) THEN
[2800]	304	done(:) = .false. !jyg
	305	DO j = 1, jqbad
	306	i=jqadrs(j)
	307	if(prt_level.ge.debug_level) THEN
	308	print*,'WARNING : EAU POUR LE POINT i lon lat =',&
	309	i,longitude_deg(i),latitude_deg(i),text
	310	print*,'l T dT Q dQ '
	311	DO k = 1, klev
	312	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	313	ENDDO
[4738]	314	ENDIF
[2800]	315	IF (ok_conserv_q) THEN
	316	!jyg<20140228 Corrections pour conservation de l'eau
	317	IF (.NOT.done(i)) THEN !jyg
	318	DO k = 1, klev
	319	zqp(k) = max(q_seri(i,k),1.e-15)
	320	ENDDO
	321	zq_int = 0.
	322	zqp_int = 0.
	323	DO k = 1, klev
	324	zq_int = zq_int + q_seri(i,k)*(paprs(i,k)-paprs(i,k+1))/Rg
	325	zqp_int = zqp_int + zqp(k) *(paprs(i,k)-paprs(i,k+1))/Rg
	326	ENDDO
[4738]	327	IF (prt_level.ge.debug_level) THEN
[2800]	328	print*,' cas q_seri<1.e-15 i k zq_int zqp_int zq_int/zqp_int :', &
	329	i, kqadrs(j), zq_int, zqp_int, zq_int/zqp_int
[4738]	330	ENDIF
[2800]	331	DO k = 1, klev
	332	zq_new = zqp(k)*zq_int/zqp_int
	333	zdq(i,k) = zdq(i,k) + zq_new - q_seri(i,k)
	334	q_seri(i,k) = zq_new
	335	ENDDO
	336	done(i) = .true.
	337	ENDIF !(.NOT.done(i))
	338	ELSE
	339	!jyg>
	340	DO k = 1, klev
	341	zq=q_seri(i,k)+zdq(i,k)
[4738]	342	IF (zq.lt.1.e-15) THEN
	343	IF (q_seri(i,k).lt.1.e-15) THEN
	344	IF (prt_level.ge.debug_level) THEN
	345	print*,' cas q_seri<1.e-15 i k q_seri zq zdq :',i,k,q_seri(i,k),zq,zdq(i,k)
	346	ENDIF
	347	q_seri(i,k)=1.e-15
	348	zdq(i,k)=(1.e-15-q_seri(i,k))
	349	ENDIF
	350	ENDIF
[2800]	351	! zq=q_seri(i,k)+zdq(i,k)
[4738]	352	! if (zq.lt.1.e-15) THEN
[2800]	353	! zdq(i,k)=(1.e-15-q_seri(i,k))
	354	! endif
	355	ENDDO
	356	!jyg<20140228
	357	ENDIF ! (ok_conserv_q)
	358	!jyg>
	359	ENDDO ! j = 1, jqbad
[4738]	360	ENDIF
[2800]	361	!
	362
	363	!IM ajout memes tests pour reverifier les jbad, jqbad beg
[4738]	364	jbad=0
	365	jqbad=0
	366	DO k = 1, klev
	367	DO i = 1, klon
	368	IF ( t_seri(i,k)>370. .or. t_seri(i,k)<130. .or. abs(zdt(i,k))>50. ) THEN
	369	jbad = jbad + 1
	370	jadrs(jbad) = i
	371	! if(prt_level.ge.debug_level) THEN
	372	! print*,'cas2 i k t_seri zdt',i,k,t_seri(i,k),zdt(i,k)
	373	! endif
	374	ENDIF
	375	IF ( q_seri(i,k)<0. .or. q_seri(i,k)>0.1 .or. abs(zdq(i,k))>1.e-2 ) THEN
	376	jqbad = jqbad + 1
	377	jqadrs(jqbad) = i
	378	kqadrs(jqbad) = k
	379	! if(prt_level.ge.debug_level) THEN
	380	! print*,'cas2 i k q_seri zdq',i,k,q_seri(i,k),zdq(i,k)
	381	! endif
	382	ENDIF
	383	ENDDO
	384	ENDDO
	385	IF (jbad .GT. 0) THEN
[2800]	386	DO j = 1, jbad
	387	i=jadrs(j)
	388	k=kadrs(j)
	389	if(prt_level.ge.debug_level) THEN
	390	print*,'PLANTAGE2 POUR LE POINT i itap lon lat txt jbad zdt t',&
	391	i,itap,longitude_deg(i),latitude_deg(i),text,jbad, &
	392	& zdt(i,k),t_seri(i,k)-zdt(i,k)
	393	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
	394	print*,'l T dT Q dQ '
	395	DO k = 1, klev
	396	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	397	ENDDO
	398	call print_debug_phys(i,debug_level,text)
[4738]	399	ENDIF
[2800]	400	ENDDO
[4738]	401	ENDIF
[2800]	402	!
[4738]	403	IF (jqbad .GT. 0) THEN
[2800]	404	DO j = 1, jqbad
	405	i=jqadrs(j)
	406	k=kqadrs(j)
[4738]	407	IF (prt_level.ge.debug_level) THEN
[2800]	408	print*,'WARNING : EAU2 POUR LE POINT i itap lon lat txt jqbad zdq q zdql ql',&
	409	i,itap,longitude_deg(i),latitude_deg(i),text,jqbad,&
	410	& zdq(i,k), q_seri(i,k)-zdq(i,k), zdql(i,k), ql_seri(i,k)-zdql(i,k)
	411	!!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN
	412	print*,'l T dT Q dQ '
	413	DO k = 1, klev
	414	write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k)
	415	ENDDO
	416	call print_debug_phys(i,debug_level,text)
[4738]	417	ENDIF
[2800]	418	ENDDO
[4738]	419	ENDIF
[2800]	420
	421	!======================================================================
	422	! Contrôle des min/max pour arrêt du modèle
	423	! Si le modele est en mode abortphy, on retire les tendances qu'on
	424	! vient d'ajouter. Pas exactement parce qu'on ne tient pas compte des
	425	! seuils.
	426	!======================================================================
	427
[4738]	428	CALL hgardfou(t_seri,ftsol,text,abortphy)
	429	IF (abortphy==1) THEN
	430	print*,'ERROR ABORT hgardfou dans ',text
[2800]	431	! JLD pourquoi on ne modifie pas de meme t_seri et q_seri ?
[4738]	432	u_seri(:,:)=u_seri(:,:)-zdu(:,:)
	433	v_seri(:,:)=v_seri(:,:)-zdv(:,:)
	434	ql_seri(:,:)=ql_seri(:,:)-zdql(:,:)
	435	qs_seri(:,:)=qs_seri(:,:)-zdqi(:,:)
	436	qbs_seri(:,:)=qbs_seri(:,:)-zdqbs(:,:)
	437	ENDIF
[2800]	438
	439	!======================================================================
	440	! Diagnostics for energy conservation tests
	441	!======================================================================
	442
[4738]	443	IF (fl_ebil .GT. 0) THEn
[2800]	444
	445	! ------------------------------------------------
	446	! Compute vertical sum for each atmospheric column
	447	! ------------------------------------------------
	448	n=2 ! end of time step
	449
[2848]	450	CALL integr_v(klon, klev, zcpvap, &
[4523]	451	t_seri, q_seri, ql_seri, qs_seri, qbs_seri, u_seri, v_seri, zairm, &
	452	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	453	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[2848]	454
[2800]	455	! ------------------------------------------------
	456	! Compute the changes by unit of time
	457	! ------------------------------------------------
	458
[3435]	459	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
	460	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
	461	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
[4523]	462	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
	463	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
[2800]	464
[3435]	465	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
[2800]	466
[3435]	467	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
	468	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
	469	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
	470	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
[4523]	471	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
[2800]	472
[3435]	473	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
[2800]	474
[4738]	475	ENDIF ! endif (fl_ebil .GT. 0)
[2812]	476	!
	477	! When in diagnostic mode, restore "out" variables to initial values.
	478	IF (diag_mode == 1) THEN
	479	u_seri(:,:) = sav_u_seri(:,:)
	480	v_seri(:,:) = sav_v_seri(:,:)
	481	ql_seri(:,:) = sav_ql_seri(:,:)
	482	qs_seri(:,:) = sav_qs_seri(:,:)
[4523]	483	qbs_seri(:,:) = sav_qbs_seri(:,:)
[2812]	484	q_seri(:,:) = sav_q_seri(:,:)
	485	t_seri(:,:) = sav_t_seri(:,:)
	486	zdq(:,:) = sav_zdq(:,:)
	487	ENDIF ! (mode == 1)
[2800]	488
	489	RETURN
	490	END SUBROUTINE add_phys_tend
	491
[4523]	492	SUBROUTINE diag_phys_tend (nlon, nlev, uu, vv, temp, qv, ql, qs, qbs, &
	493	zdu,zdv,zdt,zdq,zdql,zdqs,zdqbs,paprs,text)
[2848]	494	!======================================================================
	495	! Ajoute les tendances des variables physiques aux variables
	496	! d'etat de la dynamique t_seri, q_seri ...
	497	! On en profite pour faire des tests sur les tendances en question.
	498	!======================================================================
	499
	500
	501	!======================================================================
	502	! Declarations
	503	!======================================================================
	504
[3435]	505	USE phys_state_var_mod, ONLY : phys_tstep, ftsol
[2848]	506	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	507	USE print_control_mod, ONLY: prt_level
	508	USE cmp_seri_mod
[4523]	509	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	510	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[2848]	511	IMPLICIT none
	512	include "YOMCST.h"
	513	include "clesphys.h"
	514
	515	! Arguments :
	516	!------------
	517	INTEGER, INTENT(IN) :: nlon, nlev
	518	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: uu, vv
[4523]	519	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs
[2848]	520	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdu, zdv
[4523]	521	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdt, zdq, zdql, zdqs, zdqbs
[2848]	522	REAL, DIMENSION(nlon,nlev+1), INTENT(IN) :: paprs
	523	CHARACTER(), INTENT(IN) :: text
	524
	525	! Local :
	526	!--------
	527	REAL, DIMENSION(nlon,nlev) :: uu_n, vv_n
[4523]	528	REAL, DIMENSION(nlon,nlev) :: temp_n, qv_n, ql_n, qs_n, qbs_n
[2848]	529	!
	530	INTEGER k, n
	531
[4738]	532	INTEGER debug_level
	533	LOGICAL, SAVE :: first=.true.
[2848]	534	!$OMP THREADPRIVATE(first)
	535	!
	536	!======================================================================
	537	! Variables for energy conservation tests
	538	!======================================================================
	539	!
	540
	541	! zh_col------- total enthalpy of vertical air column
	542	! (air with watter vapour, liquid and solid) (J/m2)
	543	! zh_dair_col--- total enthalpy of dry air (J/m2)
	544	! zh_qw_col---- total enthalpy of watter vapour (J/m2)
	545	! zh_ql_col---- total enthalpy of liquid watter (J/m2)
	546	! zh_qs_col---- total enthalpy of solid watter (J/m2)
	547	! zqw_col------ total mass of watter vapour (kg/m2)
	548	! zql_col------ total mass of liquid watter (kg/m2)
[4523]	549	! zqs_col------ total mass of cloud ice (kg/m2)
	550	! zqbs_col------ total mass of blowing snow (kg/m2)
[2848]	551	! zek_col------ total kinetic energy (kg/m2)
	552	!
	553	REAL zairm(nlon, nlev) ! layer air mass (kg/m2)
	554	REAL zqw_col(nlon,2)
	555	REAL zql_col(nlon,2)
	556	REAL zqs_col(nlon,2)
[4523]	557	REAL zqbs_col(nlon,2)
[2848]	558	REAL zek_col(nlon,2)
	559	REAL zh_dair_col(nlon,2)
[4523]	560	REAL zh_qw_col(nlon,2), zh_ql_col(nlon,2), zh_qs_col(nlon,2), zh_qbs_col(nlon,2)
[2848]	561	REAL zh_col(nlon,2)
	562
	563	!======================================================================
	564	! Initialisations
	565
[4738]	566	IF (prt_level >= 5) THEN
	567	write (,) "In diag_phys_tend, after ",text
	568	CALL flush
	569	ENDIF
[2848]	570
[4738]	571	debug_level=10
	572	IF (first) THEN
	573	print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs
	574	first=.false.
	575	ENDIF
[2848]	576	!
	577	! print *,'add_phys_tend: paprs ',paprs
	578	!======================================================================
	579	! Diagnostics for energy conservation tests
	580	!======================================================================
	581	DO k = 1, nlev
	582	! layer air mass
	583	zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg
[4738]	584	ENDDO
[2848]	585
[4738]	586	IF (fl_ebil .GT. 0) THEN
[2848]	587	! ------------------------------------------------
	588	! Compute vertical sum for each atmospheric column
	589	! ------------------------------------------------
	590	n=1 ! begining of time step
	591
	592	CALL integr_v(nlon, nlev, rcpv, &
[4523]	593	temp, qv, ql, qs, qbs, uu, vv, zairm, &
	594	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	595	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[2848]	596
[4738]	597	ENDIF ! endif (fl_ebil .GT. 0)
[2848]	598
	599	!======================================================================
	600	! Ajout des tendances sur le vent, la temperature et les diverses phases de l'eau
	601	!======================================================================
	602
[4738]	603	uu_n(:,:)=uu(:,:)+zdu(:,:)
	604	vv_n(:,:)=vv(:,:)+zdv(:,:)
	605	qv_n(:,:)=qv(:,:)+zdq(:,:)
	606	ql_n(:,:)=ql(:,:)+zdql(:,:)
	607	qs_n(:,:)=qs(:,:)+zdqs(:,:)
	608	qbs_n(:,:)=qbs(:,:)+zdqbs(:,:)
	609	temp_n(:,:)=temp(:,:)+zdt(:,:)
[2848]	610
	611	!======================================================================
	612	! Diagnostics for energy conservation tests
	613	!======================================================================
	614
[4738]	615	IF (fl_ebil .GT. 0) THEN
[2848]	616
	617	! ------------------------------------------------
	618	! Compute vertical sum for each atmospheric column
	619	! ------------------------------------------------
	620	n=2 ! end of time step
	621
	622	CALL integr_v(nlon, nlev, rcpv, &
[4523]	623	temp_n, qv_n, ql_n, qs_n, qbs_n, uu_n, vv_n, zairm, &
	624	zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zqbs_col(:,n), zek_col(:,n), zh_dair_col(:,n), &
	625	zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_qbs_col(:,n), zh_col(:,n))
[2848]	626
	627	! ------------------------------------------------
	628	! Compute the changes by unit of time
	629	! ------------------------------------------------
	630
[3435]	631	d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep
	632	d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep
	633	d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep
[4523]	634	d_qbs_col(:) = (zqbs_col(:,2)-zqbs_col(:,1))/phys_tstep
	635	d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) + d_qbs_col(:)
[2848]	636
[3435]	637	d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep
[2848]	638
[4738]	639	print *,'zdu ', zdu
	640	print *,'zdv ', zdv
	641	print *,'d_ek_col, zek_col(2), zek_col(1) ',d_ek_col(1), zek_col(1,2), zek_col(1,1)
[2848]	642
[3435]	643	d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep
	644	d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep
	645	d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep
	646	d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep
[4523]	647	d_h_qbs_col(:) = (zh_qbs_col(:,2)-zh_qbs_col(:,1))/phys_tstep
[2848]	648
[3435]	649	d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep
[2848]	650
[4738]	651	ENDIF ! endif (fl_ebil .GT. 0)
[2848]	652	!
	653
	654	RETURN
	655	END SUBROUTINE diag_phys_tend
	656
	657	SUBROUTINE integr_v(nlon, nlev, zcpvap, &
[4523]	658	temp, qv, ql, qs, qbs, uu, vv, zairm, &
	659	zqw_col, zql_col, zqs_col, zqbs_col, zek_col, zh_dair_col, &
	660	zh_qw_col, zh_ql_col, zh_qs_col, zh_qbs_col, zh_col)
[2848]	661
	662	IMPLICIT none
[4738]	663	INCLUDE "YOMCST.h"
[2848]	664
	665	INTEGER, INTENT(IN) :: nlon,nlev
	666	REAL, INTENT(IN) :: zcpvap
[4523]	667	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, qbs, uu, vv
[2848]	668	REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zairm
	669	REAL, DIMENSION(nlon), INTENT(OUT) :: zqw_col
	670	REAL, DIMENSION(nlon), INTENT(OUT) :: zql_col
[4523]	671	REAL, DIMENSION(nlon), INTENT(OUT) :: zqs_col, zqbs_col
[2848]	672	REAL, DIMENSION(nlon), INTENT(OUT) :: zek_col
	673	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_dair_col
	674	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qw_col
	675	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_ql_col
[4523]	676	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qs_col, zh_qbs_col
[2848]	677	REAL, DIMENSION(nlon), INTENT(OUT) :: zh_col
	678
	679	INTEGER :: i, k
	680
	681	! Reset variables
	682	zqw_col(:) = 0.
	683	zql_col(:) = 0.
	684	zqs_col(:) = 0.
[4523]	685	zqbs_col(:) = 0.
[2848]	686	zek_col(:) = 0.
	687	zh_dair_col(:) = 0.
	688	zh_qw_col(:) = 0.
	689	zh_ql_col(:) = 0.
	690	zh_qs_col(:) = 0.
[4523]	691	zh_qbs_col(:) = 0.
[2848]	692
	693	!JLD write (,) "rcpd, zcpvap, zcwat, zcice ",rcpd, zcpvap, zcwat, zcice
	694
	695	! ------------------------------------------------
	696	! Compute vertical sum for each atmospheric column
	697	! ------------------------------------------------
	698	DO k = 1, nlev
	699	DO i = 1, nlon
	700	! Watter mass
	701	zqw_col(i) = zqw_col(i) + qv(i, k)*zairm(i, k)
	702	zql_col(i) = zql_col(i) + ql(i, k)*zairm(i, k)
	703	zqs_col(i) = zqs_col(i) + qs(i, k)*zairm(i, k)
[4523]	704	zqbs_col(i)= zqbs_col(i) + qbs(i,k)*zairm(i,k)
[2848]	705	! Kinetic Energy
	706	zek_col(i) = zek_col(i) + 0.5(uu(i,k)2+vv(i,k)2)zairm(i, k)
	707	! Air enthalpy : dry air, water vapour, liquid, solid
	708	zh_dair_col(i) = zh_dair_col(i) + rcpd(1.-qv(i,k)-ql(i,k)-qs(i,k)) &
	709	zairm(i, k)*temp(i, k)
	710	zh_qw_col(i) = zh_qw_col(i) + zcpvaptemp(i, k) qv(i, k)*zairm(i, k) !jyg
	711	zh_ql_col(i) = zh_ql_col(i) + (zcpvaptemp(i, k) - rlvtt)ql(i, k)*zairm(i, k) !jyg
	712	zh_qs_col(i) = zh_qs_col(i) + (zcpvaptemp(i, k) - rlstt)qs(i, k)*zairm(i, k) !jyg
[4523]	713	zh_qbs_col(i) = zh_qbs_col(i) + (zcpvaptemp(i, k) - rlstt)qbs(i, k)*zairm(i, k) !jyg
[4738]	714	ENDDO
	715	ENDDO
[2848]	716	! compute total air enthalpy
[4523]	717	zh_col(:) = zh_dair_col(:) + zh_qw_col(:) + zh_ql_col(:) + zh_qs_col(:) + zh_qbs_col(:)
[2848]	718
	719	END SUBROUTINE integr_v
	720
[2800]	721	SUBROUTINE prt_enerbil (text, itap)
	722	!======================================================================
	723	! Print enenrgy budget diagnotics for the 1D case
	724	!======================================================================
	725
	726	!======================================================================
	727	! Declarations
	728	!======================================================================
	729
	730	USE dimphy, ONLY: klon, klev
[3435]	731	USE phys_state_var_mod, ONLY : phys_tstep
[4523]	732	USE phys_state_var_mod, ONLY : topsw, toplw, solsw, sollw, rain_con, snow_con, bs_fall
[2800]	733	USE geometry_mod, ONLY: longitude_deg, latitude_deg
	734	USE print_control_mod, ONLY: prt_level
	735	USE cmp_seri_mod
[4523]	736	USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qbs_col, d_qt_col, d_ek_col, d_h_dair_col &
	737	& , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_qbs_col, d_h_col
[2800]	738	USE phys_local_var_mod, ONLY: evap, sens
[4523]	739	USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, qbs_seri, q_seri, t_seri &
[2800]	740	& , rain_lsc, snow_lsc
	741	USE climb_hq_mod, ONLY : d_h_col_vdf, f_h_bnd
	742	IMPLICIT none
[4738]	743	INCLUDE "YOMCST.h"
[2800]	744
	745	! Arguments :
	746	!------------
	747	CHARACTER() text ! text specifing the involved parametrization
[4738]	748	INTEGER itap ! time step number
[2800]	749	! local variables
	750	! ---------------
[4738]	751	REAL bilq_seuil, bilh_seuil ! thresold on error in Q and H budget
	752	REAL bilq_error, bilh_error ! erros in Q and H budget
	753	REAL bilq_bnd, bilh_bnd ! Q and H budget due to exchange with boundaries
	754	INTEGER bilq_ok, bilh_ok
[2800]	755	CHARACTER*(12) status
	756
	757	bilq_seuil = 1.E-10
	758	bilh_seuil = 1.E-1
	759	bilq_ok=0
	760	bilh_ok=0
	761
[2809]	762	!!print *,'prt_level:',prt_level,' fl_ebil:',fl_ebil,' fl_cor_ebil:',fl_cor_ebil
[4738]	763	IF ((fl_ebil .GT. 0) .AND. (klon .EQ. 1)) THEN
[2800]	764
	765	bilq_bnd = 0.
	766	bilh_bnd = 0.
	767
	768	param: SELECT CASE (text)
	769	CASE("vdf") param
	770	bilq_bnd = evap(1)
	771	bilh_bnd = sens(1)+(rcpv-rcpd)evap(1)t_seri(1,1)
	772	CASE("lsc") param
	773	bilq_bnd = - rain_lsc(1) - snow_lsc(1)
	774	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_lsc(1) &
	775	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_lsc(1)
[5051]	776	CASE("bsss") param
[4523]	777	bilq_bnd = - bs_fall(1)
	778	bilh_bnd = (-(rcs-rcpd)t_seri(1,1) + rlstt) bs_fall(1)
[2800]	779	CASE("convection") param
	780	bilq_bnd = - rain_con(1) - snow_con(1)
	781	bilh_bnd = (-(rcw-rcpd)t_seri(1,1) + rlvtt) rain_con(1) &
	782	& + (-(rcs-rcpd)t_seri(1,1) + rlstt) snow_con(1)
	783	CASE("SW") param
	784	bilh_bnd = topsw(1) - solsw(1)
	785	CASE("LW") param
	786	bilh_bnd = -(toplw(1) + sollw(1))
	787	CASE DEFAULT param
	788	bilq_bnd = 0.
	789	bilh_bnd = 0.
	790	END SELECT param
	791
	792	bilq_error = d_qt_col(1) - bilq_bnd
	793	bilh_error = d_h_col(1) - bilh_bnd
	794	! are the errors too large?
[4738]	795	IF (abs(bilq_error) .GT. bilq_seuil) bilq_ok=1
	796	IF (abs(bilh_error) .GT. bilh_seuil) bilh_ok=1
[2800]	797	!
	798	! Print diagnostics
	799	! =================
[4738]	800	IF ( (bilq_ok .eq. 0).AND.(bilh_ok .eq. 0) ) THEN
[2800]	801	status="enerbil-OK"
[4738]	802	ELSE
[2800]	803	status="enerbil-PB"
[4738]	804	ENDIF
[2800]	805
[4738]	806	IF (prt_level .GE. 3) THEN
[2800]	807	write(*,9010) text,status," itap:",itap,"enerbilERROR: Q", bilq_error," H", bilh_error
	808	9010 format (1x,A8,2x,A12,A6,I4,A18,E15.6,A5,E15.6)
[4738]	809	ENDIF
	810	IF (prt_level .GE. 3) THEN
[2800]	811	write(*,9000) text,"enerbil: Q,H,KE budget", d_qt_col(1), d_h_col(1),d_ek_col(1)
[4738]	812	ENDIF
	813	IF (prt_level .GE. 5) THEN
[2800]	814	write(*,9000) text,"enerbil at boundaries: Q, H",bilq_bnd, bilh_bnd
[4523]	815	write(*,9000) text,"enerbil: water budget",d_qt_col(1),d_qw_col(1),d_ql_col(1),d_qs_col(1), d_qbs_col(1)
	816	write(*,9000) text,"enerbil: enthalpy budget",d_h_col(1),d_h_dair_col(1),d_h_qw_col(1),d_h_ql_col(1),d_h_qs_col(1),d_h_qbs_col(1)
[4738]	817	ENDIF
[2800]	818
	819	specific_diag: SELECT CASE (text)
	820	CASE("vdf") specific_diag
[4738]	821	IF (prt_level .GE. 5) THEN
[2800]	822	write(*,9000) text,"enerbil: d_h, bilh, sens,t_seri", d_h_col(1), bilh_bnd, sens(1), t_seri(1,1)
	823	write(*,9000) text,"enerbil: d_h_col_vdf, f_h, diff",d_h_col_vdf, f_h_bnd, bilh_bnd-sens(1)
[4738]	824	ENDIF
[2800]	825	CASE("lsc") specific_diag
[4738]	826	IF (prt_level .GE. 5) THEN
[2800]	827	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_lsc(1), rlvtt rain_lsc(1), -(rcw-rcpd)t_seri(1,1) rain_lsc(1)
	828	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_lsc(1), rlstt snow_lsc(1), -(rcs-rcpd)t_seri(1,1) snow_lsc(1)
[4738]	829	ENDIF
[2848]	830	CASE("convection") specific_diag
[4738]	831	IF (prt_level .GE. 5) THEN
[2848]	832	write(,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_con(1), rlvtt rain_con(1), -(rcw-rcpd)t_seri(1,1) rain_con(1)
	833	write(,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_con(1), rlstt snow_con(1), -(rcs-rcpd)t_seri(1,1) snow_con(1)
[4738]	834	ENDIF
[2800]	835	END SELECT specific_diag
	836
[4738]	837	9000 FORMAT(1x,A8,2x,A35,10E15.6)
[2800]	838
[4738]	839	ENDIF ! endif (fl_ebil .GT. 0)
[2800]	840
	841	END SUBROUTINE prt_enerbil
	842
	843	END MODULE add_phys_tend_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format