Context Navigation

wxios.F90 @ 5179

Last change on this file since 5179 was 5084, checked in by Laurent Fairhead, 4 months ago
Reverting to r4065. Updating fortran standard broke too much stuff. Will do it by smaller chunks AB, LF
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory
File size: 29.8 KB

Rev	Line
[2509]	1	! $Id$
[4619]	2
[1825]	3	MODULE wxios
[4619]	4	USE lmdz_xios
[1825]	5
	6	!Variables disponibles pendant toute l'execution du programme:
	7
	8	INTEGER, SAVE :: g_comm
[3435]	9	CHARACTER(len=100), SAVE :: g_ctx_name ="LMDZ"
[1825]	10	TYPE(xios_context), SAVE :: g_ctx
[4817]	11	!$OMP THREADPRIVATE(g_comm,g_ctx_name,g_ctx)
[1852]	12	LOGICAL, SAVE :: g_flag_xml = .FALSE.
	13	CHARACTER(len=100) :: g_field_name = "nofield"
	14	!$OMP THREADPRIVATE(g_flag_xml,g_field_name)
[2271]	15	REAL :: missing_val_omp
	16	REAL :: missing_val
	17	!$OMP THREADPRIVATE(missing_val)
[1825]	18
[2741]	19	#ifdef XIOS1
	20	#error "XIOS v1 no longer supported, use XIOS v2."
	21	#endif
	22
[1825]	23	CONTAINS
	24
	25	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	26	! 36day => 36d etc !!!!!!!!!!!!!!!!!!!!
	27	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	28
	29	SUBROUTINE reformadate(odate, ndate)
	30	CHARACTER(len=*), INTENT(IN) :: odate
[2509]	31	TYPE(xios_duration) :: ndate
[1825]	32
	33	INTEGER :: i = 0
[1852]	34	!!!!!!!!!!!!!!!!!!
	35	! Pour XIOS:
	36	! year : y
	37	! month : mo
	38	! day : d
	39	! hour : h
	40	! minute : mi
	41	! second : s
	42	!!!!!!!!!!!!!!!!!!
	43
[1825]	44	i = INDEX(odate, "day")
	45	IF (i > 0) THEN
[2509]	46	read(odate(1:i-1),*) ndate%day
[1825]	47	END IF
[1852]	48
	49	i = INDEX(odate, "hr")
	50	IF (i > 0) THEN
[2509]	51	read(odate(1:i-1),*) ndate%hour
[1852]	52	END IF
	53
	54	i = INDEX(odate, "mth")
	55	IF (i > 0) THEN
[2509]	56	read(odate(1:i-1),*) ndate%month
[1852]	57	END IF
[1825]	58
[1852]	59	!IF (prt_level >= 10) WRITE(lunout,*) "Xios. ", odate, " => ", ndate
[1825]	60	END SUBROUTINE reformadate
	61
	62	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	63	! ave(X) => average etc !!!!!!!!!!!!!!!
	64	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	65
	66	CHARACTER(len=7) FUNCTION reformaop(op)
	67	CHARACTER(len=*), INTENT(IN) :: op
	68
	69	INTEGER :: i = 0
	70	reformaop = "average"
	71
[5084]	72	IF (op.EQ."inst(X)") THEN
[1825]	73	reformaop = "instant"
	74	END IF
	75
[5084]	76	IF (op.EQ."once") THEN
[1825]	77	reformaop = "once"
	78	END IF
	79
[5084]	80	IF (op.EQ."t_max(X)") THEN
[1825]	81	reformaop = "maximum"
	82	END IF
	83
[5084]	84	IF (op.EQ."t_min(X)") THEN
[1825]	85	reformaop = "minimum"
	86	END IF
	87
[1852]	88	!IF (prt_level >= 10) WRITE(lunout,*) "Xios. ", op, " => ", reformaop
[1825]	89	END FUNCTION reformaop
	90
	91	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	92	! Routine d'initialisation !!!!!!!!!!!!!
	93	! A lancer juste après mpi_init !!!!!!!!!!!!!
	94	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	95
[2055]	96	SUBROUTINE wxios_init(xios_ctx_name, locom, outcom, type_ocean)
[2509]	97	USE print_control_mod, ONLY : prt_level, lunout
[1852]	98	IMPLICIT NONE
	99
[1825]	100	CHARACTER(len=*), INTENT(IN) :: xios_ctx_name
[1852]	101	INTEGER, INTENT(IN), OPTIONAL :: locom
	102	INTEGER, INTENT(OUT), OPTIONAL :: outcom
[2055]	103	CHARACTER(len=6), INTENT(IN), OPTIONAL :: type_ocean
[1852]	104
	105
[1825]	106	TYPE(xios_context) :: xios_ctx
[1852]	107	INTEGER :: xios_comm
[1825]	108
[1897]	109	IF (prt_level >= 10) WRITE(lunout,*) "wxios_init: Initialization"
[1852]	110
	111
	112
	113	IF (PRESENT(locom)) THEN
[1897]	114	CALL xios_initialize(xios_ctx_name, local_comm = locom, return_comm = xios_comm )
	115	IF (prt_level >= 10) WRITE(lunout,*) "wxios_init: ctx=",xios_ctx_name," local_comm=",locom,", return_comm=",xios_comm
[1852]	116	ELSE
[1897]	117	CALL xios_initialize(xios_ctx_name, return_comm = xios_comm )
	118	IF (prt_level >= 10) WRITE(lunout,*) "wxios_init: ctx=",xios_ctx_name," return_comm=",xios_comm
[1852]	119	END IF
[1825]	120
[1852]	121	IF (PRESENT(outcom)) THEN
[1897]	122	outcom = xios_comm
	123	IF (prt_level >= 10) WRITE(lunout,*) "wxios_init: ctx=",xios_ctx_name," outcom=",outcom
[1852]	124	END IF
[1825]	125
	126	!Enregistrement des variables globales:
	127	g_comm = xios_comm
	128	g_ctx_name = xios_ctx_name
	129
[3435]	130	! ! Si couple alors init fait dans cpl_init
	131	! IF (.not. PRESENT(type_ocean)) THEN
	132	! CALL wxios_context_init()
	133	! ENDIF
[4146]	134	WRITE(,)'END of WXIOS_INIT', g_comm , g_ctx_name
[2054]	135
[1825]	136	END SUBROUTINE wxios_init
	137
[1852]	138	SUBROUTINE wxios_context_init()
[2509]	139	USE print_control_mod, ONLY : prt_level, lunout
[3435]	140	USE mod_phys_lmdz_mpi_data, ONLY : COMM_LMDZ_PHY
[1852]	141	IMPLICIT NONE
	142
	143	TYPE(xios_context) :: xios_ctx
	144
[2509]	145	!$OMP MASTER
[1852]	146	!Initialisation du contexte:
[3435]	147	!!CALL xios_context_initialize(g_ctx_name, g_comm)
	148	CALL xios_context_initialize(g_ctx_name, COMM_LMDZ_PHY)
[1852]	149	CALL xios_get_handle(g_ctx_name, xios_ctx) !Récupération
	150	CALL xios_set_current_context(xios_ctx) !Activation
	151	g_ctx = xios_ctx
	152
[4606]	153	CALL wxios_add_group_init
	154
[2001]	155	IF (prt_level >= 10) THEN
	156	WRITE(lunout,*) "wxios_context_init: Current context is ",trim(g_ctx_name)
	157	WRITE(lunout,*) " now call xios_solve_inheritance()"
	158	ENDIF
[1852]	159	!Une première analyse des héritages:
	160	CALL xios_solve_inheritance()
[2509]	161	!$OMP END MASTER
[1852]	162	END SUBROUTINE wxios_context_init
	163
[3435]	164
[4606]	165
	166	SUBROUTINE wxios_add_group_init
	167
	168	! routine create by Anne Cozic (2023)
	169	! This routine will create field associated to group defined without description of fields in field.xml file
	170	! This routine need to be call before "xios_sole_inheritance" after an !$OMP MASTER directive
	171
	172	USE infotrac_phy, ONLY: nbtr, nqtot, nqo, type_trac, tracers, niso, ntiso
	173	USE strings_mod, ONLY: maxlen
	174
	175	IMPLICIT NONE
	176
[4608]	177	TYPE(xios_fieldgroup) :: group_handle, philev_hdl
[4606]	178	TYPE(xios_field) :: child
	179	INTEGER :: k, iq
[4608]	180	CHARACTER(len=12) :: nvar, name_phi
[4606]	181	CHARACTER(LEN=maxlen) :: varname, dn
	182	CHARACTER(LEN=maxlen) :: unt
	183
	184
	185	! group create for StratAER variables
	186	!On ajoute les variables 3D traceurs par l interface fortran
	187	CALL xios_get_handle("fields_strataer_trac_3D", group_handle)
	188	! On boucle sur les traceurs pour les ajouter au groupe puis fixer les attributs
	189	DO iq = 1, nqtot
	190	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
	191	dn = 'd'//TRIM(tracers(iq)%name)//'_'
	192
	193	unt = "kg kg-1"
	194	varname=trim(tracers(iq)%name)
	195	CALL xios_add_child(group_handle, child, varname)
	196	CALL xios_set_attr(child, name=varname, unit=unt)
	197
	198	unt = "kg kg-1 s-1"
	199	varname=TRIM(dn)//'vdf'
	200	CALL xios_add_child(group_handle, child, varname)
	201	CALL xios_set_attr(child, name=varname, unit=unt)
	202	varname=TRIM(dn)//'the'
	203	CALL xios_add_child(group_handle, child, varname)
	204	CALL xios_set_attr(child, name=varname, unit=unt)
	205	varname=TRIM(dn)//'con'
	206	CALL xios_add_child(group_handle, child, varname)
	207	CALL xios_set_attr(child, name=varname, unit=unt)
	208	varname=TRIM(dn)//'lessi_impa'
	209	CALL xios_add_child(group_handle, child, varname)
	210	CALL xios_set_attr(child, name=varname, unit=unt)
	211	varname=TRIM(dn)//'lessi_nucl'
	212	CALL xios_add_child(group_handle, child, varname)
	213	CALL xios_set_attr(child, name=varname, unit=unt)
	214	varname=TRIM(dn)//'insc'
	215	CALL xios_add_child(group_handle, child, varname)
	216	CALL xios_set_attr(child, name=varname, unit=unt)
	217	varname=TRIM(dn)//'bcscav'
	218	CALL xios_add_child(group_handle, child, varname)
	219	CALL xios_set_attr(child, name=varname, unit=unt)
	220	varname=TRIM(dn)//'evapls'
	221	CALL xios_add_child(group_handle, child, varname)
	222	CALL xios_set_attr(child, name=varname, unit=unt)
	223	varname=TRIM(dn)//'ls'
	224	CALL xios_add_child(group_handle, child, varname)
	225	CALL xios_set_attr(child, name=varname, unit=unt)
	226	varname=TRIM(dn)//'trsp'
	227	CALL xios_add_child(group_handle, child, varname)
	228	CALL xios_set_attr(child, name=varname, unit=unt)
	229	varname=TRIM(dn)//'sscav'
	230	CALL xios_add_child(group_handle, child, varname)
	231	CALL xios_set_attr(child, name=varname, unit=unt)
	232	varname=TRIM(dn)//'sat'
	233	CALL xios_add_child(group_handle, child, varname)
	234	CALL xios_set_attr(child, name=varname, unit=unt)
	235	varname=TRIM(dn)//'uscav'
	236	CALL xios_add_child(group_handle, child, varname)
	237	CALL xios_set_attr(child, name=varname, unit=unt)
	238	END DO
	239	!On ajoute les variables 2D traceurs par l interface fortran
	240	CALL xios_get_handle("fields_strataer_trac_2D", group_handle)
	241	! On boucle sur les traceurs pour les ajouter au groupe puis fixer les attributs
	242	DO iq = 1, nqtot
	243	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
	244
	245	unt = "kg m-2"
	246	varname='cum'//trim(tracers(iq)%name)
	247
	248	CALL xios_add_child(group_handle, child, varname)
	249	CALL xios_set_attr(child, name=varname, unit=unt)
	250
	251	unt = "kg m-2 s-1"
	252	varname='cumd'//trim(tracers(iq)%name)//'_dry'
	253	CALL xios_add_child(group_handle, child, varname)
	254	CALL xios_set_attr(child, name=varname, unit=unt)
	255	ENDDO
[4608]	256
[4606]	257
[4608]	258	! group create for offline mass flow variables
	259	CALL xios_get_handle("philev_grp", philev_hdl)
[4606]	260
[4608]	261	DO k=1,79
	262	IF (k<10) THEN
	263	WRITE(nvar,'(i1)') k
	264	ELSE IF (k<100) THEN
	265	WRITE(nvar,'(i2)') k
	266	ELSE
	267	WRITE(nvar,'(i3)') k
	268	END IF
	269	name_phi= "phi_lev"//TRIM(nvar)
	270	CALL xios_add_child(philev_hdl, child, "phi_lev"//TRIM(nvar))
	271	CALL xios_set_attr(child, name=trim(name_phi))
	272	ENDDO
	273
	274
[4606]	275	END SUBROUTINE wxios_add_group_init
	276
[3435]	277	SUBROUTINE wxios_set_context()
	278	IMPLICIT NONE
	279	TYPE(xios_context) :: xios_ctx
	280
	281	!$OMP MASTER
	282	CALL xios_get_handle(g_ctx_name, xios_ctx) !Récupération
	283	CALL xios_set_current_context(xios_ctx) !Activation
	284	!$OMP END MASTER
	285
	286	END SUBROUTINE wxios_set_context
	287
[1825]	288	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	289	! Routine de paramétrisation !!!!!!!!!!!!!!!!!!
	290	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	291
[2095]	292	SUBROUTINE wxios_set_cal(pasdetemps, calendrier, annee, mois, jour, heure, ini_an, ini_mois, ini_jour, ini_heure)
[2509]	293	USE print_control_mod, ONLY : prt_level, lunout
[1852]	294	IMPLICIT NONE
	295
[1825]	296	!Paramètres:
	297	CHARACTER(len=*), INTENT(IN) :: calendrier
[2095]	298	INTEGER, INTENT(IN) :: annee, mois, jour, ini_an, ini_mois, ini_jour
	299	REAL, INTENT(IN) :: pasdetemps, heure, ini_heure
[1825]	300
	301	!Variables:
	302	CHARACTER(len=80) :: abort_message
	303	CHARACTER(len=19) :: date
	304	INTEGER :: njour = 1
	305
	306	!Variables pour xios:
[2509]	307	TYPE(xios_duration) :: mdtime
[1825]	308	!REAL(kind = 8) :: year=0, month=0, day=0, hour=0, minute=0, second=0
	309
[2509]	310	mdtime%second=pasdetemps
[1825]	311
	312	!Réglage du calendrier:
	313	SELECT CASE (calendrier)
	314	CASE('earth_360d')
[2509]	315	CALL xios_define_calendar("D360")
	316	IF (prt_level >= 10) WRITE(lunout,*) 'wxios_set_cal: Calendrier terrestre a 360 jours/an'
	317	CASE('earth_365d')
	318	CALL xios_define_calendar("NoLeap")
	319	IF (prt_level >= 10) WRITE(lunout,*) 'wxios_set_cal: Calendrier terrestre a 365 jours/an'
	320	CASE('gregorian')
	321	CALL xios_define_calendar("Gregorian")
	322	IF (prt_level >= 10) WRITE(lunout,*) 'wxios_set_cal: Calendrier gregorien'
	323	CASE DEFAULT
	324	abort_message = 'wxios_set_cal: Mauvais choix de calendrier'
[3435]	325	CALL abort_physic('Gcm:Xios',abort_message,1)
[2509]	326	END SELECT
[1825]	327
[2095]	328	!Formatage de la date d'origine:
[2509]	329	WRITE(date, "(i4.4,'-',i2.2,'-',i2.2,' ',i2.2,':00:00')") annee, mois, jour, int(heure)
[1825]	330
[2095]	331	IF (prt_level >= 10) WRITE(lunout,*) "wxios_set_cal: Time origin: ", date
[2509]	332	CALL xios_set_time_origin(xios_date(annee,mois,jour,int(heure),0,0))
[2095]	333
	334	!Formatage de la date de debut:
	335
	336	WRITE(date, "(i4.4,'-',i2.2,'-',i2.2,' ',i2.2,':00:00')") ini_an, ini_mois, ini_jour, int(ini_heure)
[1825]	337
[2095]	338	IF (prt_level >= 10) WRITE(lunout,*) "wxios_set_cal: Start date: ", date
	339
[2509]	340	CALL xios_set_start_date(xios_date(ini_an,ini_mois,ini_jour,int(ini_heure),0,0))
[2095]	341
[1825]	342	!Et enfin,le pas de temps:
	343	CALL xios_set_timestep(mdtime)
[1897]	344	IF (prt_level >= 10) WRITE(lunout,*) "wxios_set_cal: ts=",mdtime
[1825]	345	END SUBROUTINE wxios_set_cal
	346
[1852]	347	SUBROUTINE wxios_set_timestep(ts)
	348	REAL, INTENT(IN) :: ts
[2509]	349	TYPE(xios_duration) :: mdtime
[1852]	350
[2509]	351	mdtime%timestep = ts
	352
[1852]	353	CALL xios_set_timestep(mdtime)
	354	END SUBROUTINE wxios_set_timestep
	355
[1825]	356	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	357	! Pour initialiser un domaine !!!!!!!!!!!!!!!!!!!!
	358	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3435]	359	SUBROUTINE wxios_domain_param(dom_id)
	360	USE dimphy, only: klon
	361	USE mod_phys_lmdz_transfert_para, ONLY: gather, bcast
	362	USE mod_phys_lmdz_para, only: jj_nb, jj_begin, jj_end, ii_begin, ii_end, &
	363	mpi_size, mpi_rank, klon_mpi, &
	364	is_sequential, is_south_pole_dyn
	365	USE mod_grid_phy_lmdz, only: nbp_lon, nbp_lat, klon_glo
	366	USE print_control_mod, ONLY : prt_level, lunout
	367	USE geometry_mod
[1897]	368
[3435]	369	IMPLICIT NONE
	370	CHARACTER(len=*),INTENT(IN) :: dom_id ! domain identifier
[1852]	371
[3435]	372	REAL :: rlat_glo(klon_glo)
	373	REAL :: rlon_glo(klon_glo)
	374	REAL :: io_lat(nbp_lat)
	375	REAL :: io_lon(nbp_lon)
	376	LOGICAL :: mask(nbp_lon,jj_nb) !Masque pour les problèmes de recouvrement MPI
[1825]	377	TYPE(xios_domain) :: dom
[3435]	378	INTEGER :: i
[1852]	379	LOGICAL :: boool
[1825]	380
[3435]	381
	382
	383	CALL gather(latitude_deg,rlat_glo)
	384	CALL bcast(rlat_glo)
	385	CALL gather(longitude_deg,rlon_glo)
	386	CALL bcast(rlon_glo)
	387
	388	!$OMP MASTER
	389	io_lat(1)=rlat_glo(1)
	390	io_lat(nbp_lat)=rlat_glo(klon_glo)
	391	IF ((nbp_lon*nbp_lat) > 1) then
	392	DO i=2,nbp_lat-1
	393	io_lat(i)=rlat_glo(2+(i-2)*nbp_lon)
	394	ENDDO
	395	ENDIF
	396
	397	IF (klon_glo == 1) THEN
	398	io_lon(1)=rlon_glo(1)
	399	ELSE
	400	io_lon(1:nbp_lon)=rlon_glo(2:nbp_lon+1)
	401	ENDIF
	402
[1825]	403
	404	!On récupère le handle:
[4619]	405	CALL xios_get_handle(dom_id, dom)
[1825]	406
	407	!On parametrise le domaine:
[4619]	408	CALL xios_set_attr(dom, ni_glo=nbp_lon, ibegin=0, ni=nbp_lon, type="rectilinear")
	409	CALL xios_set_attr(dom, nj_glo=nbp_lat, jbegin=jj_begin-1, nj=jj_nb, data_dim=2)
	410	CALL xios_set_attr(dom, lonvalue_1d=io_lon(1:nbp_lon), latvalue_1d=io_lat(jj_begin:jj_end))
[3435]	411	CALL xios_set_domain_attr("dom_out", domain_ref=dom_id)
	412
[3165]	413	!On definit un axe de latitudes pour les moyennes zonales
	414	IF (xios_is_valid_axis("axis_lat")) THEN
[3435]	415	CALL xios_set_axis_attr( "axis_lat", n_glo=nbp_lat, n=jj_nb, begin=jj_begin-1, value=io_lat(jj_begin:jj_end))
[3165]	416	ENDIF
[4477]	417	IF (xios_is_valid_axis("axis_lat_greordered")) THEN
	418	CALL xios_set_axis_attr( "axis_lat_greordered", n_glo=nbp_lat, n=jj_nb, begin=jj_begin-1, &
	419	value=io_lat(jj_begin:jj_end)*(-1.))
	420	ENDIF
[3165]	421
[1852]	422	IF (.NOT.is_sequential) THEN
	423	mask(:,:)=.TRUE.
[1897]	424	if (ii_begin>1) mask(1:ii_begin-1,1) = .FALSE.
[3435]	425	if (ii_end<nbp_lon) mask(ii_end+1:nbp_lon,jj_nb) = .FALSE.
[1897]	426	! special case for south pole
[3435]	427	if ((ii_end==1).and.(is_south_pole_dyn)) mask(1:nbp_lon,jj_nb)=.true.
[1897]	428	IF (prt_level >= 10) THEN
	429	WRITE(lunout,*) "wxios_domain_param: mpirank=",mpi_rank," mask(:,1)=",mask(:,1)
[3435]	430	WRITE(lunout,*) "wxios_domain_param: mpirank=",mpi_rank," mask(:,jj_nb)=",mask(:,jj_nb)
[1897]	431	ENDIF
[4619]	432	CALL xios_set_attr(dom, mask_2d=mask)
[1852]	433	END IF
	434
[4619]	435	CALL xios_is_defined_attr(dom,ni_glo=boool)
[1825]	436	!Vérification:
	437	IF (xios_is_valid_domain(dom_id)) THEN
[1897]	438	IF (prt_level >= 10) WRITE(lunout,*) "wxios_domain_param: Domain initialized: ", trim(dom_id), boool
[1825]	439	ELSE
[1897]	440	IF (prt_level >= 10) WRITE(lunout,*) "wxios_domain_param: Invalid domain: ", trim(dom_id)
[1825]	441	END IF
[3435]	442	!$OMP END MASTER
	443
[1825]	444	END SUBROUTINE wxios_domain_param
	445
[3435]	446
	447	SUBROUTINE wxios_domain_param_unstructured(dom_id)
	448	USE geometry_mod, ONLY : longitude, latitude, boundslon, boundslat,ind_cell_glo
	449	USE mod_grid_phy_lmdz, ONLY : nvertex, klon_glo
	450	USE mod_phys_lmdz_para
	451	USE nrtype, ONLY : PI
	452	USE ioipsl_getin_p_mod, ONLY : getin_p
	453	IMPLICIT NONE
	454	CHARACTER(len=*),INTENT(IN) :: dom_id ! domain identifier
	455	REAL :: lon_mpi(klon_mpi)
	456	REAL :: lat_mpi(klon_mpi)
	457	REAL :: boundslon_mpi(klon_mpi,nvertex)
	458	REAL :: boundslat_mpi(klon_mpi,nvertex)
	459	INTEGER :: ind_cell_glo_mpi(klon_mpi)
	460	TYPE(xios_domain) :: dom
[3465]	461
[3435]	462	LOGICAL :: remap_output
	463
	464	CALL gather_omp(longitude*180/PI,lon_mpi)
	465	CALL gather_omp(latitude*180/PI,lat_mpi)
	466	CALL gather_omp(boundslon*180/PI,boundslon_mpi)
	467	CALL gather_omp(boundslat*180/PI,boundslat_mpi)
	468	CALL gather_omp(ind_cell_glo,ind_cell_glo_mpi)
	469
	470	remap_output=.TRUE.
	471	CALL getin_p("remap_output",remap_output)
	472
	473	!$OMP MASTER
[4619]	474	CALL xios_get_handle(dom_id, dom)
[3435]	475
	476	!On parametrise le domaine:
	477	CALL xios_set_attr(dom, ni_glo=klon_glo, ibegin=ij_begin-1, ni=ij_nb, type="unstructured")
	478	CALL xios_set_attr(dom, nvertex=nvertex, lonvalue_1d=lon_mpi, latvalue_1d=lat_mpi, &
	479	bounds_lon_1d=TRANSPOSE(boundslon_mpi), bounds_lat_1d=TRANSPOSE(boundslat_mpi) )
	480	CALL xios_set_attr(dom, i_index=ind_cell_glo_mpi(:)-1)
	481	IF (remap_output) THEN
	482	CALL xios_set_domain_attr("dom_out", domain_ref="dom_regular")
	483	CALL xios_set_fieldgroup_attr("remap_expr", expr="@this_ref")
[3465]	484	CALL xios_set_fieldgroup_attr("remap_1800s", freq_op=xios_duration_convert_from_string("1800s"))
	485	CALL xios_set_fieldgroup_attr("remap_1h", freq_op=xios_duration_convert_from_string("1h"))
	486	CALL xios_set_fieldgroup_attr("remap_3h", freq_op=xios_duration_convert_from_string("3h"))
	487	CALL xios_set_fieldgroup_attr("remap_6h", freq_op=xios_duration_convert_from_string("6h"))
	488	CALL xios_set_fieldgroup_attr("remap_1d", freq_op=xios_duration_convert_from_string("1d"))
	489	CALL xios_set_fieldgroup_attr("remap_1mo", freq_op=xios_duration_convert_from_string("1mo"))
[3435]	490	ENDIF
	491	!$OMP END MASTER
	492
	493	END SUBROUTINE wxios_domain_param_unstructured
	494
	495
	496
	497
[1825]	498	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	499	! Pour déclarer un axe vertical !!!!!!!!!!!!!!!
	500	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3003]	501	SUBROUTINE wxios_add_vaxis(axis_id, axis_size, axis_value, &
	502	positif, bnds)
[2509]	503	USE print_control_mod, ONLY : prt_level, lunout
[1852]	504	IMPLICIT NONE
	505
[2002]	506	CHARACTER (len=*), INTENT(IN) :: axis_id
[1852]	507	INTEGER, INTENT(IN) :: axis_size
[1825]	508	REAL, DIMENSION(axis_size), INTENT(IN) :: axis_value
[3003]	509	CHARACTER (len=*), INTENT(IN), OPTIONAL :: positif
	510	REAL, DIMENSION(axis_size, 2), INTENT(IN), OPTIONAL :: bnds
[1825]	511
[2002]	512	! TYPE(xios_axisgroup) :: axgroup
	513	! TYPE(xios_axis) :: ax
	514	! CHARACTER(len=50) :: axis_id
[1825]	515
[2002]	516	! IF (len_trim(axisgroup_id).gt.len(axis_id)) THEN
	517	! WRITE(lunout,*) "wxios_add_vaxis: error, size of axis_id too small!!"
	518	! WRITE(lunout,*) " increase it to at least ",len_trim(axisgroup_id)
	519	! CALL abort_gcm("wxios_add_vaxis","len(axis_id) too small",1)
	520	! ENDIF
	521	! axis_id=trim(axisgroup_id)
[1825]	522
	523	!On récupère le groupe d'axes qui va bien:
[2002]	524	!CALL xios_get_axisgroup_handle(axisgroup_id, axgroup)
[1825]	525
	526	!On ajoute l'axe correspondant à ce fichier:
[2002]	527	!CALL xios_add_axis(axgroup, ax, TRIM(ADJUSTL(axis_id)))
[1825]	528
	529	!Et on le parametrise:
[2002]	530	!CALL xios_set_axis_attr_hdl(ax, size=axis_size, value=axis_value)
[1825]	531
[2002]	532	! Ehouarn: New way to declare axis, without axis_group:
[3003]	533	if (PRESENT(positif) .AND. PRESENT(bnds)) then
	534	CALL xios_set_axis_attr(trim(axis_id),n_glo=axis_size,value=axis_value, &
	535	positive=positif, bounds=bnds)
	536	else if (PRESENT(positif)) then
	537	CALL xios_set_axis_attr(trim(axis_id),n_glo=axis_size,value=axis_value, &
	538	positive=positif)
	539	else if (PRESENT(bnds)) then
	540	CALL xios_set_axis_attr(trim(axis_id),n_glo=axis_size,value=axis_value, &
	541	bounds=bnds)
	542	else
	543	CALL xios_set_axis_attr(trim(axis_id),n_glo=axis_size,value=axis_value)
	544	endif
[2741]	545
[1825]	546	!Vérification:
[1852]	547	IF (xios_is_valid_axis(TRIM(ADJUSTL(axis_id)))) THEN
[1897]	548	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_vaxis: Axis created: ", TRIM(ADJUSTL(axis_id))
[1825]	549	ELSE
[2001]	550	WRITE(lunout,*) "wxios_add_vaxis: Invalid axis: ", TRIM(ADJUSTL(axis_id))
[1825]	551	END IF
	552
	553	END SUBROUTINE wxios_add_vaxis
	554
	555
	556	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	557	! Pour déclarer un fichier !!!!!!!!!!!!!!!!!!!
	558	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	559	SUBROUTINE wxios_add_file(fname, ffreq, flvl)
[2509]	560	USE print_control_mod, ONLY : prt_level, lunout
[1852]	561	IMPLICIT NONE
	562
[1825]	563	CHARACTER(len=*), INTENT(IN) :: fname
	564	CHARACTER(len=*), INTENT(IN) :: ffreq
	565	INTEGER, INTENT(IN) :: flvl
	566
	567	TYPE(xios_file) :: x_file
	568	TYPE(xios_filegroup) :: x_fg
[2509]	569	TYPE(xios_duration) :: nffreq
[1825]	570
[1852]	571	!On regarde si le fichier n'est pas défini par XML:
	572	IF (.NOT.xios_is_valid_file(fname)) THEN
	573	!On créé le noeud:
[4619]	574	CALL xios_get_handle("defile", x_fg)
	575	CALL xios_add_child(x_fg, x_file, fname)
[1825]	576
[1852]	577	!On reformate la fréquence:
	578	CALL reformadate(ffreq, nffreq)
[1825]	579
[1852]	580	!On configure:
[4619]	581	CALL xios_set_attr(x_file, name="X"//fname,&
[2509]	582	output_freq=nffreq, output_level=flvl, enabled=.TRUE.)
	583
[1852]	584	IF (xios_is_valid_file("X"//fname)) THEN
[2001]	585	IF (prt_level >= 10) THEN
	586	WRITE(lunout,*) "wxios_add_file: New file: ", "X"//fname
[2509]	587	WRITE(lunout,*) "wxios_add_file: output_freq=",nffreq,"; output_lvl=",flvl
[2001]	588	ENDIF
[1852]	589	ELSE
[2001]	590	WRITE(lunout,*) "wxios_add_file: Error, invalid file: ", "X"//trim(fname)
[2509]	591	WRITE(lunout,*) "wxios_add_file: output_freq=",nffreq,"; output_lvl=",flvl
[1852]	592	END IF
[1825]	593	ELSE
[2001]	594	IF (prt_level >= 10) THEN
	595	WRITE(lunout,*) "wxios_add_file: File ",trim(fname), " défined using XML."
	596	ENDIF
	597	! Ehouarn: add an enable=.true. on top of xml definitions... why???
	598	CALL xios_set_file_attr(fname, enabled=.TRUE.)
[1825]	599	END IF
	600	END SUBROUTINE wxios_add_file
	601
	602	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1852]	603	! Pour créer un champ !!!!!!!!!!!!!!!!!!!!
[1825]	604	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	605	SUBROUTINE wxios_add_field(fieldname, fieldgroup, fieldlongname, fieldunit)
[5084]	606	USE netcdf, only: nf90_fill_real
[1852]	607
	608	IMPLICIT NONE
	609	INCLUDE 'iniprint.h'
[1825]	610
	611	CHARACTER(len=*), INTENT(IN) :: fieldname
	612	TYPE(xios_fieldgroup), INTENT(IN) :: fieldgroup
	613	CHARACTER(len=*), INTENT(IN) :: fieldlongname
	614	CHARACTER(len=*), INTENT(IN) :: fieldunit
	615
	616	TYPE(xios_field) :: field
	617	CHARACTER(len=10) :: newunit
	618	REAL(KIND=8) :: def
	619
	620	!La valeur par défaut des champs non définis:
	621	def = nf90_fill_real
	622
[5084]	623	IF (fieldunit .EQ. " ") THEN
[1825]	624	newunit = "-"
	625	ELSE
	626	newunit = fieldunit
	627	ENDIF
	628
	629	!On ajoute le champ:
[4619]	630	CALL xios_add_child(fieldgroup, field, fieldname)
[1897]	631	!IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field: ",fieldname,fieldgroup, fieldlongname, fieldunit
[1825]	632
	633	!On rentre ses paramètres:
[4619]	634	CALL xios_set_attr(field, standard_name=fieldlongname, unit=newunit, default_value=def)
[1897]	635	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field: Field ",trim(fieldname), "cree:"
	636	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field: long_name=",trim(fieldlongname),"; unit=",trim(newunit),"; default_value=",nf90_fill_real
[1825]	637
	638	END SUBROUTINE wxios_add_field
	639
	640	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1852]	641	! Pour déclarer un champ !!!!!!!!!!!!!!!!!
[1825]	642	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2137]	643	SUBROUTINE wxios_add_field_to_file(fieldname, fdim, fid, fname, fieldlongname, fieldunit, field_level, op, nam_axvert)
[2509]	644	USE print_control_mod, ONLY : prt_level, lunout
[1852]	645	IMPLICIT NONE
	646
[1825]	647	CHARACTER(len=*), INTENT(IN) :: fieldname
	648	INTEGER, INTENT(IN) :: fdim, fid
	649	CHARACTER(len=*), INTENT(IN) :: fname
	650	CHARACTER(len=*), INTENT(IN) :: fieldlongname
	651	CHARACTER(len=*), INTENT(IN) :: fieldunit
	652	INTEGER, INTENT(IN) :: field_level
	653	CHARACTER(len=*), INTENT(IN) :: op
	654
[2001]	655	CHARACTER(len=20) :: axis_id ! Ehouarn: dangerous...
[2137]	656	CHARACTER(len=20), INTENT(IN), OPTIONAL :: nam_axvert
[1825]	657	CHARACTER(len=100) :: operation
	658	TYPE(xios_file) :: f
	659	TYPE(xios_field) :: field
	660	TYPE(xios_fieldgroup) :: fieldgroup
[2509]	661	TYPE(xios_duration) :: freq_op
[2741]	662
[1852]	663	LOGICAL :: bool=.FALSE.
	664	INTEGER :: lvl =0
[1825]	665
	666
[2001]	667	! Ajout Abd pour NMC:
[5084]	668	IF (fid.LE.6) THEN
[2001]	669	axis_id="presnivs"
	670	ELSE
	671	axis_id="plev"
	672	ENDIF
[2137]	673
	674	IF (PRESENT(nam_axvert)) THEN
	675	axis_id=nam_axvert
	676	print*,'nam_axvert=',axis_id
	677	ENDIF
[1825]	678
	679	!on prépare le nom de l'opération:
	680	operation = reformaop(op)
	681
	682
	683	!On selectionne le bon groupe de champs:
[5084]	684	IF (fdim.EQ.2) THEN
[4619]	685	CALL xios_get_handle("fields_2D", fieldgroup)
[1825]	686	ELSE
[4619]	687	CALL xios_get_handle("fields_3D", fieldgroup)
[1825]	688	ENDIF
	689
	690	!On regarde si le champ à déjà été créé ou non:
[1852]	691	IF (xios_is_valid_field(fieldname) .AND. .NOT. g_field_name == fieldname) THEN
	692	!Si ce champ existe via XML (ie, dès le premier passage, ie g_field_name != fieldname) alors rien d'autre à faire
[1897]	693	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field_to_file: Field ", trim(fieldname), "exists via XML"
[1852]	694	g_flag_xml = .TRUE.
	695	g_field_name = fieldname
	696
	697	ELSE IF (.NOT. g_field_name == fieldname) THEN
	698	!Si premier pssage et champ indéfini, alors on le créé
	699
[1897]	700	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field_to_file: Field ", trim(fieldname), "does not exist"
[1825]	701
	702	!On le créé:
	703	CALL wxios_add_field(fieldname, fieldgroup, fieldlongname, fieldunit)
	704	IF (xios_is_valid_field(fieldname)) THEN
[1897]	705	IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field_to_file: Field ", trim(fieldname), "created"
[1825]	706	ENDIF
	707
[1852]	708	g_flag_xml = .FALSE.
	709	g_field_name = fieldname
	710
	711	END IF
	712
	713	IF (.NOT. g_flag_xml) THEN
	714	!Champ existe déjà, mais pas XML, alors on l'ajoute
	715	!On ajoute le champ:
[4619]	716	CALL xios_get_handle(fname, f)
	717	CALL xios_add_child(f, field)
[1852]	718
	719
	720	!L'operation, sa frequence:
[2509]	721	freq_op%timestep=1
[4619]	722	CALL xios_set_attr(field, field_ref=fieldname, operation=TRIM(ADJUSTL(operation)), freq_op=freq_op, prec=4)
[1852]	723
	724
	725	!On rentre ses paramètres:
[4619]	726	CALL xios_set_attr(field, level=field_level, enabled=.TRUE.)
[1852]	727
[5084]	728	IF (fdim.EQ.2) THEN
[1852]	729	!Si c'est un champ 2D:
[1897]	730	IF (prt_level >= 10) THEN
	731	WRITE(lunout,*) "wxios_add_field_to_file: 2D Field ", trim(fieldname), " in ", "X"//trim(fname) ," configured with:"
	732	WRITE(lunout,*) "wxios_add_field_to_file: op=", TRIM(ADJUSTL(operation))
	733	WRITE(lunout,*) "wxios_add_field_to_file: freq_op=1ts","; lvl=",field_level
	734	ENDIF
[1852]	735	ELSE
	736	!Si 3D :
	737	!On ajoute l'axe vertical qui va bien:
[4619]	738	CALL xios_set_attr(field, axis_ref=TRIM(ADJUSTL(axis_id)))
[1852]	739
[1897]	740	IF (prt_level >= 10) THEN
	741	WRITE(lunout,*) "wxios_add_field_to_file: 3D Field",trim(fieldname), " in ", "X"//trim(fname), "configured with:"
	742	WRITE(lunout,*) "wxios_add_field_to_file: freq_op=1ts","; lvl=",field_level
	743	WRITE(lunout,*) "wxios_add_field_to_file: axis=",TRIM(ADJUSTL(axis_id))
	744	ENDIF
[1852]	745	END IF
[1825]	746
	747	ELSE
[1852]	748	!Sinon on se contente de l'activer:
	749	CALL xios_set_field_attr(fieldname, enabled=.TRUE.)
[2002]	750	!NB: This will override an enable=.false. set by a user in the xml file;
	751	! then the only way to not output the field is by changing its
	752	! output level
[1852]	753	ENDIF
[1825]	754
	755	END SUBROUTINE wxios_add_field_to_file
	756
[2002]	757	! SUBROUTINE wxios_update_calendar(ito)
	758	! INTEGER, INTENT(IN) :: ito
	759	! CALL xios_update_calendar(ito)
	760	! END SUBROUTINE wxios_update_calendar
	761	!
	762	! SUBROUTINE wxios_write_2D(fieldname, fdata)
	763	! CHARACTER(len=*), INTENT(IN) :: fieldname
	764	! REAL, DIMENSION(:,:), INTENT(IN) :: fdata
	765	!
	766	! CALL xios_send_field(fieldname, fdata)
	767	! END SUBROUTINE wxios_write_2D
[1825]	768
[2002]	769	! SUBROUTINE wxios_write_3D(fieldname, fdata)
	770	! CHARACTER(len=*), INTENT(IN) :: fieldname
	771	! REAL, DIMENSION(:,:,:), INTENT(IN) :: fdata
	772	!
	773	! CALL xios_send_field(fieldname, fdata)
	774	! END SUBROUTINE wxios_write_3D
[1825]	775
	776	SUBROUTINE wxios_closedef()
	777	CALL xios_close_context_definition()
[2095]	778	! CALL xios_update_calendar(0)
[1825]	779	END SUBROUTINE wxios_closedef
	780
	781	SUBROUTINE wxios_close()
	782	CALL xios_context_finalize()
	783	CALL xios_finalize()
	784	END SUBROUTINE wxios_close
	785	END MODULE wxios
[4619]	786

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format