source: LMDZ6/trunk/libf/dyn3dmem/sw_case_williamson91_6_loc.f90 @ 5285

!
! $Id $
!
SUBROUTINE sw_case_williamson91_6_loc(vcov,ucov,teta,masse,ps)

  !=======================================================================
  !
  !   Author:    Thomas Dubos      original: 26/01/2010
  !   -------
  !
  !   Subject:
  !   ------
  !   Realise le cas-test 6 de Williamson et al. (1991) : onde de Rossby-Haurwitz
  !
  !   Method:
  !   --------
  !
  !   Interface:
  !   ----------
  !
  !  Input:
  !  ------
  !
  !  Output:
  !  -------
  !
  !=======================================================================
  USE iniprint_mod_h
  USE comgeom_mod_h
  USE parallel_lmdz
  USE comconst_mod, ONLY: cpp, omeg, rad
  USE comvert_mod, ONLY: ap, bp, preff

  USE dimensions_mod, ONLY: iim, jjm, llm, ndm
USE paramet_mod_h
IMPLICIT NONE
  !-----------------------------------------------------------------------
  !   Declararations:
  !   ---------------




  !   Arguments:
  !   ----------

  !   variables dynamiques
  REAL :: vcov(ijb_v:ije_v,llm),ucov(ijb_u:ije_u,llm) ! vents covariants
  REAL :: teta(ijb_u:ije_u,llm)                 ! temperature potentielle
  REAL :: ps(ijb_u:ije_u)                       ! pression  au sol
  REAL :: masse(ijb_u:ije_u,llm)                ! masse d'air
  REAL :: phis(ijb_u:ije_u)                     ! geopotentiel au sol

  !   Local:
  !   ------

  real,allocatable :: ucov_glo(:,:)
  real,allocatable :: vcov_glo(:,:)
  real,allocatable :: teta_glo(:,:)
  real,allocatable :: masse_glo(:,:)
  real,allocatable :: ps_glo(:)

   ! REAL p (ip1jmp1,llmp1  )               ! pression aux interfac.des couches
   ! REAL pks(ip1jmp1)                      ! exner au  sol
   ! REAL pk(ip1jmp1,llm)                   ! exner au milieu des couches
   ! REAL pkf(ip1jmp1,llm)                  ! exner filt.au milieu des couches
   ! REAL alpha(ip1jmp1,llm),beta(ip1jmp1,llm)

  real,allocatable :: p(:,:)
  real,allocatable :: pks(:)
  real,allocatable :: pk(:,:)
  real,allocatable :: pkf(:,:)
  real,allocatable :: alpha(:,:),beta(:,:)

  REAL :: sinth,costh,costh2, Ath,Bth,Cth, lon,dps
  INTEGER :: i,j,ij

  REAL, PARAMETER    :: rho=1 ! masse volumique de l'air (arbitraire)
  REAL, PARAMETER    :: K    = 7.848e-6  ! K = \omega
  REAL, PARAMETER    :: gh0  = 9.80616 * 8e3
  INTEGER, PARAMETER :: R0=4, R1=R0+1, R2=R0+2         ! mode 4
  ! NB : rad = 6371220 dans W91 (6371229 dans LMDZ)
   ! omeg = 7.292e-5 dans W91 (7.2722e-5 dans LMDZ)


   ! ! allocate (global) arrays
   allocate(vcov_glo(ip1jm,llm))
   allocate(ucov_glo(ip1jmp1,llm))
   allocate(teta_glo(ip1jmp1,llm))
   allocate(ps_glo(ip1jmp1))
   allocate(masse_glo(ip1jmp1,llm))

   allocate(p(ip1jmp1,llmp1))
   allocate(pks(ip1jmp1))
   allocate(pk(ip1jmp1,llm))
   allocate(pkf(ip1jmp1,llm))
   allocate(alpha(ip1jmp1,llm))
   allocate(beta(ip1jmp1,llm))

  IF(0==0) THEN
  !c Williamson et al. (1991) : onde de Rossby-Haurwitz
     teta_glo(:,:) = preff/rho/cpp
  !c geopotentiel (pression de surface)
     do j=1,jjp1
        costh2 = cos(rlatu(j))**2
        Ath = (R0+1)*(costh2**2) + (2*R0*R0-R0-2)*costh2 - 2*R0*R0
        Ath = .25*(K**2)*(costh2**(R0-1))*Ath
        Ath = .5*K*(2*omeg+K)*costh2 + Ath
        Bth = (R1*R1+1)-R1*R1*costh2
        Bth = 2*(omeg+K)*K/(R1*R2) * (costh2**(R0/2))*Bth
        Cth = R1*costh2 - R2
        Cth = .25*K*K*(costh2**R0)*Cth
        do i=1,iip1
           ij=(j-1)*iip1+i
           lon = rlonv(i)
           dps = Ath + Bth*cos(R0*lon) + Cth*cos(2*R0*lon)
           ps_glo(ij) = rho*(gh0 + (rad**2)*dps)
        enddo
     enddo
      ! write(lunout,*) 'W91 ps', MAXVAL(ps), MINVAL(ps)
  ! vitesse zonale ucov
     do j=1,jjp1
        costh  = cos(rlatu(j))
        costh2 = costh**2
        Ath = rad*K*costh
        Bth = R0*(1-costh2)-costh2
        Bth = rad*K*Bth*(costh**(R0-1))
        do i=1,iip1
           ij=(j-1)*iip1+i
           lon = rlonu(i)
           ucov_glo(ij,1) = (Ath + Bth*cos(R0*lon))
        enddo
     enddo
      ! write(lunout,*) 'W91 u', MAXVAL(ucov(:,1)), MINVAL(ucov(:,1))
     ucov_glo(:,1)=ucov_glo(:,1)*cu
  ! vitesse meridienne vcov
     do j=1,jjm
        sinth  = sin(rlatv(j))
        costh  = cos(rlatv(j))
        Ath = -rad*K*R0*sinth*(costh**(R0-1))
        do i=1,iip1
           ij=(j-1)*iip1+i
           lon = rlonv(i)
           vcov_glo(ij,1) = Ath*sin(R0*lon)
        enddo
     enddo
     write(lunout,*) 'W91 v', MAXVAL(vcov(:,1)), MINVAL(vcov(:,1))
     vcov_glo(:,1)=vcov_glo(:,1)*cv

      ! ucov_glo=0
      ! vcov_glo=0
  ELSE
  ! test non-tournant, onde se propageant en latitude
     do j=1,jjp1
        do i=1,iip1
           ij=(j-1)*iip1+i
           ps_glo(ij) = 1e5*(1 + .1*exp(-100*(1+sin(rlatu(j)))**2))
        enddo
     enddo

  ! rho = preff/(cpp*teta)
     teta_glo(:,:) = .01*preff/cpp   ! rho = 100 ; phi = ps/rho = 1e3 ; c=30 m/s = 2600 km/j = 23 degres / j
     ucov_glo(:,:)=0.
     vcov_glo(:,:)=0.
  END IF

  CALL pression ( ip1jmp1, ap, bp, ps_glo, p       )
  CALL massdair(p,masse_glo)

  ! ! copy data from global array to local array:
  teta(ijb_u:ije_u,:)=teta_glo(ijb_u:ije_u,:)
  ucov(ijb_u:ije_u,:)=ucov_glo(ijb_u:ije_u,:)
  vcov(ijb_v:ije_v,:)=vcov_glo(ijb_v:ije_v,:)
  masse(ijb_u:ije_u,:)=masse_glo(ijb_u:ije_u,:)
  ps(ijb_u:ije_u)=ps_glo(ijb_u:ije_u)

  ! ! cleanup
  deallocate(teta_glo)
  deallocate(ucov_glo)
  deallocate(vcov_glo)
  deallocate(masse_glo)
  deallocate(ps_glo)
  deallocate(p)
  deallocate(pks)
  deallocate(pk)
  deallocate(pkf)
  deallocate(alpha)
  deallocate(beta)

END SUBROUTINE sw_case_williamson91_6_loc
!-----------------------------------------------------------------------