source: LMDZ6/trunk/libf/dyn3dmem/leapfrog_loc.f90 @ 5440

SUBROUTINE leapfrog_loc(ucov0,vcov0,teta0,ps0, &
        masse0,phis0,q0,time_0)

   USE iniprint_mod_h
  USE comgeom_mod_h
  USE comdissnew_mod_h
   USE misc_mod
   USE parallel_lmdz
   USE times
   USE mod_hallo
   USE Bands
   USE Write_Field
   USE Write_Field_p
   USE vampir
   USE timer_filtre, ONLY : print_filtre_timer
   USE infotrac
   USE guide_loc_mod, ONLY : guide_main
   USE getparam
   USE control_mod
   USE mod_filtreg_p
   USE write_field_loc
   USE allocate_field_mod
   USE call_dissip_mod, ONLY : call_dissip
   USE call_calfis_mod, ONLY : call_calfis
   USE leapfrog_mod, ONLY : ucov,vcov,teta,ps,masse,phis,q,dq &
         ,ucovm1,vcovm1,tetam1,massem1,psm1,p,pks,pk,pkf,flxw &
         ,pbaru,pbarv,du,dv,dteta,phi,dp,w &
         ,leapfrog_allocate,leapfrog_switch_caldyn,leapfrog_switch_dissip

   use exner_hyb_loc_m, only: exner_hyb_loc
   use exner_milieu_loc_m, only: exner_milieu_loc
   USE comconst_mod, ONLY: cpp, dtvr, ihf
   USE comvert_mod, ONLY: ap, bp, pressure_exner
   USE logic_mod, ONLY: iflag_phys,ok_guide,forward,leapf,apphys, &
         statcl,conser,apdiss,purmats,ok_strato
   USE temps_mod, ONLY: itaufin,jD_ref,jH_ref,day_ini, &
         day_ref,start_time,dt
   USE mod_xios_dyn3dmem, ONLY : dyn3d_ctx_handle
   USE lmdz_xios, ONLY: xios_update_calendar, &
         xios_set_current_context, &
         using_xios
   USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_INCA, CPPKEY_REPROBUS
   USE lmdz_reprobus_wrappers, ONLY: finalize_reprobus
   USE strings_mod, ONLY: int2str

   USE dimensions_mod, ONLY: iim, jjm, llm, ndm
   USE paramet_mod_h
   USE academic_mod_h, ONLY: tetarappel, knewt_t, knewt_g, clat4
IMPLICIT NONE

   ! ......   Version  du 10/01/98    ..........

   !        avec  coordonnees  verticales hybrides
  !   avec nouveaux operat. dissipation * ( gradiv2,divgrad2,nxgraro2 )

  !=======================================================================
  !
  !   Auteur:  P. Le Van /L. Fairhead/F.Hourdin
  !   -------
  !
  !   Objet:
  !   ------
  !
  !   GCM LMD nouvelle grille
  !
  !=======================================================================
  !
  !  ... Dans inigeom , nouveaux calculs pour les elongations  cu , cv
  !  et possibilite d'appeler une fonction f(y)  a derivee tangente
  !  hyperbolique a la  place de la fonction a derivee sinusoidale.

  !  ... Possibilite de choisir le shema pour l'advection de
  !    q  , en modifiant iadv dans traceur.def  (10/02) .
  !
  !  Pour Van-Leer + Vapeur d'eau saturee, iadv(1)=4. (F.Codron,10/99)
  !  Pour Van-Leer iadv=10
  !
  !-----------------------------------------------------------------------
  !   Declarations:
  !   -------------
  REAL,INTENT(IN) :: time_0 ! not used

  !   dynamical variables:
  REAL,INTENT(IN) :: ucov0(ijb_u:ije_u,llm)    ! zonal covariant wind
  REAL,INTENT(IN) :: vcov0(ijb_v:ije_v,llm)    ! meridional covariant wind
  REAL,INTENT(IN) :: teta0(ijb_u:ije_u,llm)    ! potential temperature
  REAL,INTENT(IN) :: q0(ijb_u:ije_u,llm,nqtot) ! advected tracers
  REAL,INTENT(IN) :: ps0(ijb_u:ije_u)          ! surface pressure (Pa)
  REAL,INTENT(IN) :: masse0(ijb_u:ije_u,llm)   ! air mass
  REAL,INTENT(IN) :: phis0(ijb_u:ije_u)        ! geopotentiat at the surface

  real :: zqmin,zqmax

   ! REAL,SAVE,ALLOCATABLE :: p (:,:  )               ! pression aux interfac.des couches
   ! REAL,SAVE,ALLOCATABLE :: pks(:)                      ! exner au  sol
   ! REAL,SAVE,ALLOCATABLE :: pk(:,:)                   ! exner au milieu des couches
   ! REAL,SAVE,ALLOCATABLE :: pkf(:,:)                  ! exner filt.au milieu des couches
   ! REAL,SAVE,ALLOCATABLE :: phi(:,:)                  ! geopotentiel
   ! REAL,SAVE,ALLOCATABLE :: w(:,:)                    ! vitesse verticale

  ! variables dynamiques intermediaire pour le transport
   ! REAL,SAVE,ALLOCATABLE :: pbaru(:,:),pbarv(:,:) !flux de masse

  !   variables dynamiques au pas -1
   ! REAL,SAVE,ALLOCATABLE :: vcovm1(:,:),ucovm1(:,:)
  !      REAL,SAVE,ALLOCATABLE :: tetam1(:,:),psm1(:)
   ! REAL,SAVE,ALLOCATABLE :: massem1(:,:)

  !   tendances dynamiques
   ! REAL,SAVE,ALLOCATABLE :: dv(:,:),du(:,:)
   ! REAL,SAVE,ALLOCATABLE :: dteta(:,:),dp(:)
   ! REAL,DIMENSION(:,:,:), ALLOCATABLE, SAVE :: dq

  !   tendances de la dissipation
   ! REAL,SAVE,ALLOCATABLE :: dvdis(:,:),dudis(:,:)
   ! REAL,SAVE,ALLOCATABLE :: dtetadis(:,:)

  !   tendances physiques
  REAL,SAVE,ALLOCATABLE :: dvfi(:,:),dufi(:,:)
  REAL,SAVE,ALLOCATABLE :: dtetafi(:,:)
  REAL,SAVE,ALLOCATABLE :: dpfi(:)
  REAL,DIMENSION(:,:,:),ALLOCATABLE,SAVE :: dqfi

  !   variables pour le fichier histoire
  REAL :: dtav      ! intervalle de temps elementaire

  REAL :: tppn(iim),tpps(iim),tpn,tps
  !
  INTEGER :: itau,itaufinp1,iav
   ! INTEGER  iday ! jour julien
  REAL :: time

  REAL :: SSUM
   ! REAL,SAVE,ALLOCATABLE :: finvmaold(:,:)

  !ym      LOGICAL  lafin
  LOGICAL :: lafin
  INTEGER :: ij,iq,l
  INTEGER :: ik

  real :: time_step, t_wrt, t_ops

  ! jD_cur: jour julien courant
  ! jH_cur: heure julienne courante
  REAL :: jD_cur, jH_cur
  INTEGER :: an, mois, jour
  REAL :: secondes

  logical :: physic
  LOGICAL :: first,callinigrads

  data callinigrads/.true./
  character(len=10) :: string10

   ! REAL,SAVE,ALLOCATABLE :: flxw(:,:) ! flux de masse verticale

  !+jld variables test conservation energie
   ! REAL,SAVE,ALLOCATABLE :: ecin(:,:),ecin0(:,:)
  ! Tendance de la temp. potentiel d (theta)/ d t due a la
  ! tansformation d'energie cinetique en energie thermique
  ! cree par la dissipation
  !  REAL,SAVE,ALLOCATABLE :: dtetaecdt(:,:)
  !  REAL,SAVE,ALLOCATABLE :: vcont(:,:),ucont(:,:)
  !  REAL,SAVE,ALLOCATABLE :: vnat(:,:),unat(:,:)
  REAL :: d_h_vcol, d_qt, d_qw, d_ql, d_ec
  CHARACTER(len=15) :: ztit
  !!      INTEGER   ip_ebil_dyn  ! PRINT level for energy conserv. diag.
   ! SAVE      ip_ebil_dyn
   ! DATA      ip_ebil_dyn/0/
  !-jld

  character(len=80) :: dynhist_file, dynhistave_file
  character(len=*),parameter :: modname="leapfrog_loc"
  character(len=80) :: abort_message


  logical,PARAMETER :: dissip_conservative=.TRUE.

  INTEGER :: testita
  PARAMETER (testita = 9)

  logical , parameter :: flag_verif = .false.

  ! declaration liees au parallelisme
  INTEGER :: ierr
  LOGICAL :: FirstCaldyn
  LOGICAL :: FirstPhysic
  INTEGER :: ijb,ije,j,i
  type(Request) :: TestRequest
  type(Request) :: Request_Dissip
  type(Request) :: Request_physic

  INTEGER :: true_itau
  INTEGER :: iapptrac
  INTEGER :: AdjustCount
   ! INTEGER :: var_time
  LOGICAL :: ok_start_timer=.FALSE.
  LOGICAL, SAVE :: firstcall=.TRUE.
  TYPE(distrib),SAVE :: new_dist

  call check_isotopes(q0,ijb_u,ije_u,'leapfrog204: debut')

!$OMP MASTER
  ItCount=0
!$OMP END MASTER
  true_itau=0
  FirstCaldyn=.TRUE.
  FirstPhysic=.TRUE.
  iapptrac=0
  AdjustCount = 0
  lafin=.false.

  if (nday>=0) then
     itaufin   = nday*day_step
  else
     itaufin   = -nday
  endif

  itaufinp1 = itaufin +1

  call check_isotopes(q0,ijb_u,ije_u,'leapfrog 226')

  itau = 0
  physic=.true.
  if (iflag_phys==0.or.iflag_phys==2) physic=.false.
  CALL init_nan
  CALL leapfrog_allocate
  ucov=ucov0
  vcov=vcov0
  teta=teta0
  ps=ps0
  masse=masse0
  phis=phis0
  q=q0

  call check_isotopes(q,ijb_u,ije_u,'leapfrog 239')

   ! iday = day_ini+itau/day_step
   ! time = REAL(itau-(iday-day_ini)*day_step)/day_step+time_0
   !    IF(time.GT.1.) THEN
   !     time = time-1.
   !     iday = iday+1
   !    ENDIF

  ! Allocate variables depending on dynamic variable nqtot
!$OMP MASTER
  if (firstcall) then
  !
  !  ALLOCATE(p(ijb_u:ije_u,llmp1))
  !      ALLOCATE(pks(ijb_u:ije_u))
  !  ALLOCATE(pk(ijb_u:ije_u,llm))
  !  ALLOCATE(pkf(ijb_u:ije_u,llm))
  !  ALLOCATE(phi(ijb_u:ije_u,llm))
  !  ALLOCATE(w(ijb_u:ije_u,llm))
  !  ALLOCATE(pbaru(ip1jmp1,llm),pbarv(ip1jm,llm))
  !  ALLOCATE(vcovm1(ijb_v:ije_v,llm),ucovm1(ijb_u:ije_u,llm))
  !  ALLOCATE(tetam1(ijb_u:ije_u,llm),psm1(ijb_u:ije_u))
  !  ALLOCATE(massem1(ijb_u:ije_u,llm))
  !  ALLOCATE(dv(ijb_v:ije_v,llm),du(ijb_u:ije_u,llm))
  !  ALLOCATE(dteta(ijb_u:ije_u,llm),dp(ijb_u:ije_u))
  !  ALLOCATE(dvdis(ijb_v:ije_v,llm),dudis(ijb_u:ije_u,llm))
  !  ALLOCATE(dtetadis(ijb_u:ije_u,llm))
  ALLOCATE(dvfi(ijb_v:ije_v,llm),dufi(ijb_u:ije_u,llm))
  ALLOCATE(dtetafi(ijb_u:ije_u,llm))
  ALLOCATE(dpfi(ijb_u:ije_u))
   ! ALLOCATE(dq(ijb_u:ije_u,llm,nqtot))
  ALLOCATE(dqfi(ijb_u:ije_u,llm,nqtot))
   ! ALLOCATE(dqfi_tmp(iip1,llm,nqtot))
   ! ALLOCATE(finvmaold(ijb_u:ije_u,llm))
   ! ALLOCATE(flxw(ijb_u:ije_u,llm))
   ! ALLOCATE(ecin(ijb_u:ije_u,llm),ecin0(ijb_u:ije_u,llm))
   ! ALLOCATE(dtetaecdt(ijb_u:ije_u,llm))
   ! ALLOCATE(vcont(ijb_v:ije_v,llm),ucont(ijb_u:ije_u,llm))
   ! ALLOCATE(vnat(ijb_v:ije_v,llm),unat(ijb_u:ije_u,llm))
  endif
!$OMP END MASTER
!$OMP BARRIER

             ! CALL dynredem1_loc("restart.nc",0.0,
  ! &                           vcov,ucov,teta,q,masse,ps)


  !-----------------------------------------------------------------------
  !   On initialise la pression et la fonction d'Exner :
  !   --------------------------------------------------

!$OMP MASTER
  dq(:,:,:)=0.
  CALL pression ( ijnb_u, ap, bp, ps, p       )
!$OMP END MASTER
  if (pressure_exner) then
  CALL exner_hyb_loc( ijnb_u, ps, p, pks, pk, pkf)
  else
    CALL exner_milieu_loc( ijnb_u, ps, p, pks, pk, pkf )
  endif
  !-----------------------------------------------------------------------
  !   Debut de l'integration temporelle:
  !   ----------------------------------
  ! et du parallelisme !!

   1   CONTINUE ! Matsuno Forward step begins here

  !   date: (NB: date remains unchanged for Backward step)
  !   -----

  jD_cur = jD_ref + day_ini - day_ref +                             &
        (itau+1)/day_step
  jH_cur = jH_ref + start_time +                                    &
        mod(itau+1,day_step)/float(day_step)
  if (jH_cur > 1.0 ) then
    jD_cur = jD_cur +1.
    jH_cur = jH_cur -1.
  endif

  call check_isotopes(q,ijb_u,ije_u,'leapfrog 321')

  if (ok_guide) then
    call guide_main(itau,ucov,vcov,teta,q,masse,ps)
!$OMP BARRIER
  endif



  !
  ! IF( MOD( itau, 10* day_step ).EQ.0 )  THEN
  !   CALL  test_period ( ucov,vcov,teta,q,p,phis )
  !   PRINT *,' ----   Test_period apres continue   OK ! -----', itau
  ! ENDIF
  !
  !ym      CALL SCOPY( ijmllm ,vcov , 1, vcovm1 , 1 )
  !ym      CALL SCOPY( ijp1llm,ucov , 1, ucovm1 , 1 )
  !ym      CALL SCOPY( ijp1llm,teta , 1, tetam1 , 1 )
  !ym      CALL SCOPY( ijp1llm,masse, 1, massem1, 1 )
  !ym      CALL SCOPY( ip1jmp1, ps  , 1,   psm1 , 1 )

   if (FirstCaldyn) then
!$OMP MASTER
     ucovm1=ucov
     vcovm1=vcov
     tetam1= teta
     massem1= masse
     psm1= ps

  ! Ehouarn: finvmaold is actually not used
      ! finvmaold = masse
!$OMP END MASTER
!$OMP BARRIER
      ! CALL filtreg_p ( finvmaold ,jjb_u,jje_u,jjb_u,jje_u,jjp1, llm,
  ! &                    -2,2, .TRUE., 1 )
   else
  ! Save fields obtained at previous time step as '...m1'
     ijb=ij_begin
     ije=ij_end

!$OMP MASTER
     psm1     (ijb:ije) = ps    (ijb:ije)
!$OMP END MASTER

!$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
     DO l=1,llm
       ije=ij_end
       ucovm1   (ijb:ije,l) = ucov  (ijb:ije,l)
       tetam1   (ijb:ije,l) = teta  (ijb:ije,l)
       massem1  (ijb:ije,l) = masse (ijb:ije,l)
        ! finvmaold(ijb:ije,l)=masse(ijb:ije,l)

       if (pole_sud) ije=ij_end-iip1
       vcovm1(ijb:ije,l) = vcov  (ijb:ije,l)


     ENDDO
!$OMP ENDDO


  ! Ehouarn: finvmaold not used
       ! CALL filtreg_p(finvmaold ,jjb_u,jje_u,jj_begin,jj_end,jjp1,
  ! .                    llm, -2,2, .TRUE., 1 )

   endif ! of if (FirstCaldyn)

  forward = .TRUE.
  leapf   = .FALSE.
  dt      =  dtvr

  !   ...    P.Le Van .26/04/94  ....

  !ym      CALL SCOPY   ( ijp1llm,   masse, 1, finvmaold,     1 )
  !ym      CALL filtreg ( finvmaold ,jjp1, llm, -2,2, .TRUE., 1 )

  !ym  ne sert a rien
  !ym      call minmax(ijp1llm,q(:,:,3),zqmin,zqmax)


     call check_isotopes(q,ijb_u,ije_u,'leapfrog 400')

   2   CONTINUE ! Matsuno backward or leapfrog step begins here


  call check_isotopes(q,ijb_u,ije_u,'leapfrog 402')

!$OMP MASTER
  ItCount=ItCount+1
  if (MOD(ItCount,1)==1) then
    debug=.true.
  else
    debug=.false.
  endif
!$OMP END MASTER
  !-----------------------------------------------------------------------

  !   date: (NB: only leapfrog step requires recomputing date)
  !   -----

  IF (leapf) THEN
    jD_cur = jD_ref + day_ini - day_ref + &
          (itau+1)/day_step
    jH_cur = jH_ref + start_time + &
          mod(itau+1,day_step)/float(day_step)
    if (jH_cur > 1.0 ) then
      jD_cur = jD_cur +1.
      jH_cur = jH_cur -1.
    endif
  ENDIF

  !   gestion des appels de la physique et des dissipations:
  !   ------------------------------------------------------
  !
  !   ...    P.Le Van  ( 6/02/95 )  ....

  apphys = .FALSE.
  statcl = .FALSE.
  conser = .FALSE.
  apdiss = .FALSE.

  IF( purmats ) THEN
  ! ! Purely Matsuno time stepping
     IF( MOD(itau,iconser) .EQ.0.AND.  forward    ) conser = .TRUE.
     IF( MOD(itau,dissip_period ).EQ.0.AND..NOT.forward ) &
           apdiss = .TRUE.
     IF( MOD(itau,iphysiq ).EQ.0.AND..NOT.forward &
           .and. physic                        ) apphys = .TRUE.
  ELSE
  ! ! Leapfrog/Matsuno time stepping
     IF( MOD(itau   ,iconser) .EQ. 0              ) conser = .TRUE.
     IF( MOD(itau+1,dissip_period).EQ.0 .AND. .NOT. forward ) &
           apdiss = .TRUE.
     IF( MOD(itau+1,iphysiq).EQ.0.AND.physic) apphys=.TRUE.
  END IF

  ! Ehouarn: for Shallow Water case (ie: 1 vertical layer),
       ! supress dissipation step
  if (llm.eq.1) then
    apdiss=.false.
  endif

  !ym    ---> Pour le moment
  !ym      apphys = .FALSE.
  statcl = .FALSE.
  ! conser = .FALSE. ! ie: no output of control variables to stdout in //

  if (firstCaldyn) then
!$OMP MASTER
      call Set_Distrib(distrib_caldyn)
!$OMP END MASTER
!$OMP BARRIER
      firstCaldyn=.FALSE.
  !ym          call InitTime
!$OMP MASTER
      call Init_timer
!$OMP END MASTER
  endif

!$OMP MASTER
  IF (ok_start_timer) THEN
    CALL InitTime
    ok_start_timer=.FALSE.
  ENDIF
!$OMP END MASTER


  call check_isotopes(q,ijb_u,ije_u,'leapfrog 471')

  !ym  PAS D'AJUSTEMENT POUR LE MOMENT
  if (Adjust) then
    AdjustCount=AdjustCount+1
     ! if (iapptrac==iapp_tracvl .and. (forward.OR. leapf)
  ! &         .and. itau/iphysiq>2 .and. Adjustcount>30) then
    if (Adjustcount>1) then
       AdjustCount=0
!$OMP MASTER
       call allgather_timer_average

    if (prt_level > 9) then

    print *,'*********************************'
    print *,'******    TIMER CALDYN     ******'
    do i=0,mpi_size-1
      print *,'proc',i,' :   Nb Bandes  :',jj_nb_caldyn(i), &
            '  : temps moyen :', &
            timer_average(jj_nb_caldyn(i),timer_caldyn,i), &
            '+-',timer_delta(jj_nb_caldyn(i),timer_caldyn,i)
    enddo

    print *,'*********************************'
    print *,'******    TIMER VANLEER    ******'
    do i=0,mpi_size-1
      print *,'proc',i,' :   Nb Bandes  :',jj_nb_vanleer(i), &
            '  : temps moyen :', &
            timer_average(jj_nb_vanleer(i),timer_vanleer,i), &
            '+-',timer_delta(jj_nb_vanleer(i),timer_vanleer,i)
    enddo

    print *,'*********************************'
    print *,'******    TIMER DISSIP    ******'
    do i=0,mpi_size-1
      print *,'proc',i,' :   Nb Bandes  :',jj_nb_dissip(i), &
            '  : temps moyen :', &
            timer_average(jj_nb_dissip(i),timer_dissip,i), &
            '+-',timer_delta(jj_nb_dissip(i),timer_dissip,i)
    enddo

     ! if (mpi_rank==0) call WriteBands

   endif

     call AdjustBands_caldyn(new_dist)
!$OMP END MASTER
!$OMP BARRIER
     CALL leapfrog_switch_caldyn(new_dist)
!$OMP BARRIER


!$OMP MASTER
     distrib_caldyn=new_dist
     CALL set_distrib(distrib_caldyn)
!$OMP END MASTER
!$OMP BARRIER
      ! call Register_SwapFieldHallo(ucov,ucov,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(ucovm1,ucovm1,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(vcov,vcov,ip1jm,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(vcovm1,vcovm1,ip1jm,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(teta,teta,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(tetam1,tetam1,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(masse,masse,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(massem1,massem1,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(ps,ps,ip1jmp1,1,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(psm1,psm1,ip1jmp1,1,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(pkf,pkf,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(pk,pk,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(pks,pks,ip1jmp1,1,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(phis,phis,ip1jmp1,1,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(phi,phi,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !     call Register_SwapFieldHallo(finvmaold,finvmaold,ip1jmp1,llm,
  ! &                                jj_Nb_caldyn,0,0,TestRequest)
  !
  !    do j=1,nqtot
  !     call Register_SwapFieldHallo(q(:,:,j),q(:,:,j),ip1jmp1,llm,
  ! &                                jj_nb_caldyn,0,0,TestRequest)
  !    enddo
  !
  !     call Set_Distrib(distrib_caldyn)
  !     call SendRequest(TestRequest)
  !     call WaitRequest(TestRequest)

!$OMP MASTER
    call AdjustBands_dissip(new_dist)
!$OMP END MASTER
!$OMP BARRIER
    CALL leapfrog_switch_dissip(new_dist)
!$OMP BARRIER
!$OMP MASTER
    distrib_dissip=new_dist
!$OMP END MASTER
!$OMP BARRIER
     ! call AdjustBands_physic

!$OMP MASTER
    if (mpi_rank==0) call WriteBands
!$OMP END MASTER


  endif
  endif


  call check_isotopes(q,ijb_u,ije_u,'leapfrog 589')

  !-----------------------------------------------------------------------
  !   calcul des tendances dynamiques:
  !   --------------------------------
!$OMP BARRIER
!$OMP MASTER
   call VTb(VThallo)
!$OMP END MASTER

   call Register_Hallo_u(ucov,llm,1,1,1,1,TestRequest)
   call Register_Hallo_v(vcov,llm,1,1,1,1,TestRequest)
   call Register_Hallo_u(teta,llm,1,1,1,1,TestRequest)
   call Register_Hallo_u(ps,1,1,2,2,1,TestRequest)
   call Register_Hallo_u(pkf,llm,1,1,1,1,TestRequest)
   call Register_Hallo_u(pk,llm,1,1,1,1,TestRequest)
   call Register_Hallo_u(pks,1,1,1,1,1,TestRequest)
   call Register_Hallo_u(p,llmp1,1,1,1,1,TestRequest)

    ! do j=1,nqtot
    !   call Register_Hallo(q(1,1,j),ip1jmp1,llm,1,1,1,1,
  ! *                       TestRequest)
  !    enddo

   call SendRequest(TestRequest)
!$OMP BARRIER
   call WaitRequest(TestRequest)

!$OMP MASTER
   call VTe(VThallo)
!$OMP END MASTER
!$OMP BARRIER

  if (debug) then
    call WriteField_u('ucov',ucov)
    call WriteField_v('vcov',vcov)
    call WriteField_u('teta',teta)
    call WriteField_u('ps',ps)
    call WriteField_u('masse',masse)
    call WriteField_u('pk',pk)
    call WriteField_u('pks',pks)
    call WriteField_u('pkf',pkf)
    call WriteField_u('phis',phis)
    do iq=1,nqtot
      call WriteField_u('q'//trim(int2str(iq)), &
            q(:,:,iq))
    enddo
  endif


  True_itau=True_itau+1

!$OMP MASTER
  IF (prt_level>9) THEN
    WRITE(lunout,*)"leapfrog_p: Iteration No",True_itau
  ENDIF


  call start_timer(timer_caldyn)

  ! ! compute geopotential phi()
  CALL geopot_loc  ( ip1jmp1, teta  , pk , pks,  phis  , phi   )

  call check_isotopes(q,ijb_u,ije_u,'leapfrog 651')

  call VTb(VTcaldyn)
!$OMP END MASTER
   ! var_time=time+iday-day_ini

!$OMP BARRIER
   ! CALL FTRACE_REGION_BEGIN("caldyn")
  time = jD_cur + jH_cur

  CALL caldyn_loc &
        ( itau,ucov,vcov,teta,ps,masse,pk,pkf,phis , &
        phi,conser,du,dv,dteta,dp,w, pbaru,pbarv, time )

   ! CALL FTRACE_REGION_END("caldyn")

!$OMP MASTER
  if (mpi_rank==0.AND.conser) THEN
     WRITE(lunout,*) 'leapfrog_loc, Time step: ',itau,' Day:',time
  ENDIF
  call VTe(VTcaldyn)
!$OMP END MASTER

  !-----------------------------------------------------------------------
  !   calcul des tendances advection des traceurs (dont l'humidite)
  !   -------------------------------------------------------------

  call check_isotopes(q,ijb_u,ije_u, &
        'leapfrog 686: avant caladvtrac')

  IF( forward.OR. leapf )  THEN
  ! Ehouarn: NB: fields sent to advtrac are those at the beginning of the time step
    ! !write(*,*) 'leapfrog 679: avant CALL caladvtrac_loc'
     CALL caladvtrac_loc(q,pbaru,pbarv, &
           p, masse, dq,  teta, &
           flxw,pk, iapptrac)

  ! call creation of mass flux
     IF (offline .AND. .NOT. adjust) THEN
        CALL fluxstokenc_p(pbaru,pbarv,masse,teta,phi)
     ENDIF

     ! !write(*,*) 'leapfrog 719'
     call check_isotopes(q,ijb_u,ije_u, &
           'leapfrog 698: apres caladvtrac')

   ! do j=1,nqtot
   !   call WriteField_u('qadv'//trim(int2str(j)),q(:,:,j))
   ! enddo

  ! Ehouarn: Storage of mass flux for off-line tracers... not implemented...

  ENDIF ! of IF( forward.OR. leapf )


  !-----------------------------------------------------------------------
  !   integrations dynamique et traceurs:
  !   ----------------------------------

!$OMP MASTER
   call VTb(VTintegre)
!$OMP END MASTER
!$OMP BARRIER
    ! CALL FTRACE_REGION_BEGIN("integrd")

   ! !write(*,*) 'leapfrog 720'
   call check_isotopes(q,ijb_u,ije_u,'leapfrog 756')

   ! ! CRisi: pourquoi aller jusqu'à 2 et non pas jusqu'à nqtot??
   CALL integrd_loc ( nqtot,vcovm1,ucovm1,tetam1,psm1,massem1 , &
         dv,du,dteta,dq,dp,vcov,ucov,teta,q,ps,masse,phis)
  ! $              finvmaold                                    )

  !  !write(*,*) 'leapfrog 724'
   call check_isotopes(q,ijb_u,ije_u,'leapfrog 762')

    ! CALL FTRACE_REGION_END("integrd")
!$OMP BARRIER

  call check_isotopes(q,ijb_u,ije_u,'leapfrog 775')

   ! do j=1,nqtot
   !   call WriteField_p('q'//trim(int2str(j)),
  ! .                reshape(q(:,:,j),(/iip1,jmp1,llm/)))
  !    call WriteField_p('dq'//trim(int2str(j)),
  ! .                reshape(dq(:,:,j),(/iip1,jmp1,llm/)))
  !  enddo


!$OMP MASTER
   call VTe(VTintegre)
!$OMP END MASTER
  ! .P.Le Van (26/04/94  ajout de  finvpold dans l'appel d'integrd)
  !
  !-----------------------------------------------------------------------
  !   calcul des tendances physiques:
  !   -------------------------------
  !    ########   P.Le Van ( Modif le  6/02/95 )   ###########
  !
   IF( purmats )  THEN
      IF( itau.EQ.itaufin.AND..NOT.forward ) lafin = .TRUE.
   ELSE
      IF( itau+1.EQ. itaufin )              lafin = .TRUE.
   ENDIF

  !c$OMP END PARALLEL

  !
  !
   IF( apphys )  THEN

     CALL call_calfis(itau,lafin,ucov,vcov,teta,masse,ps, &
           phis,q,flxw)
  ! #ifdef DEBUG_IO
      ! call WriteField_u('ucovfi',ucov)
      ! call WriteField_v('vcovfi',vcov)
      ! call WriteField_u('tetafi',teta)
      ! call WriteField_u('pfi',p)
      ! call WriteField_u('pkfi',pk)
      ! do j=1,nqtot
      !   call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
      ! enddo
  ! #endif
  ! c
  ! c     .......   Ajout   P.Le Van ( 17/04/96 )   ...........
  ! c
  ! cc$OMP PARALLEL DEFAULT(SHARED)
  ! cc$OMP+         PRIVATE(rdaym_ini,rdayvrai,ijb,ije)

  ! c$OMP MASTER
      !  call suspend_timer(timer_caldyn)

      !  write(lunout,*)
   ! &   'leapfrog_p: Entree dans la physique : Iteration No ',true_itau
  ! c$OMP END MASTER

   !     CALL pression_loc (  ip1jmp1, ap, bp, ps,  p      )

  ! c$OMP BARRIER
   !     CALL exner_hyb_loc(  ip1jmp1, ps, p,pks, pk, pkf )
  ! c$OMP BARRIER
   !       jD_cur = jD_ref + day_ini - day_ref
   ! $        + int (itau * dtvr / daysec)
   !       jH_cur = jH_ref +                                            &
   ! &              (itau * dtvr / daysec - int(itau * dtvr / daysec))
  ! !         call ju2ymds(jD_cur+jH_cur, an, mois, jour, secondes)

  ! c rajout debug
  ! c       lafin = .true.


  ! c   Inbterface avec les routines de phylmd (phymars ... )
  ! c   -----------------------------------------------------

  ! c+jld

  ! c  Diagnostique de conservation de l'energie : initialisation
  !
  ! c-jld
  ! c$OMP BARRIER
  ! c$OMP MASTER
  !     call VTb(VThallo)
  ! c$OMP END MASTER

  ! #ifdef DEBUG_IO
  !     call WriteField_u('ucovfi',ucov)
  !     call WriteField_v('vcovfi',vcov)
  !     call WriteField_u('tetafi',teta)
  !     call WriteField_u('pfi',p)
  !     call WriteField_u('pkfi',pk)
  ! #endif
  !     call SetTag(Request_physic,800)
  !
  !     call Register_SwapField_u(ucov,ucov,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_v(vcov,vcov,distrib_physic,
  !  *                            Request_physic,up=2,down=2)

  !     call Register_SwapField_u(teta,teta,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(masse,masse,distrib_physic,
  !  *                            Request_physic,up=1,down=2)

  !     call Register_SwapField_u(p,p,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(pk,pk,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(phis,phis,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(phi,phi,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(w,w,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call Register_SwapField_u(q,q,distrib_physic,
  !  *                            Request_physic,up=2,down=2)

  !     call Register_SwapField_u(flxw,flxw,distrib_physic,
  !  *                            Request_physic,up=2,down=2)
  !
  !     call SendRequest(Request_Physic)
  ! c$OMP BARRIER
  !     call WaitRequest(Request_Physic)

  ! c$OMP BARRIER
  ! c$OMP MASTER
  !     call Set_Distrib(distrib_Physic)
  !     call VTe(VThallo)
  !
  !     call VTb(VTphysiq)
  ! c$OMP END MASTER
  ! c$OMP BARRIER

  ! #ifdef DEBUG_IO
  !   call WriteField_u('ucovfi',ucov)
  !   call WriteField_v('vcovfi',vcov)
  !   call WriteField_u('tetafi',teta)
  !   call WriteField_u('pfi',p)
  !   call WriteField_u('pkfi',pk)
  !   do j=1,nqtot
  !     call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
  !   enddo
  ! #endif
  !    STOP
  ! c$OMP BARRIER
  ! !        CALL FTRACE_REGION_BEGIN("calfis")
  !     CALL calfis_loc(lafin ,jD_cur, jH_cur,
  !  $               ucov,vcov,teta,q,masse,ps,p,pk,phis,phi ,
  !  $               du,dv,dteta,dq,
  !  $               flxw,
  !  $               dufi,dvfi,dtetafi,dqfi,dpfi  )
  ! !        CALL FTRACE_REGION_END("calfis")
  ! !        ijb=ij_begin
  ! !        ije=ij_end
  ! !        if ( .not. pole_nord) then
  ! !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  ! !          DO l=1,llm
  ! !          dufi_tmp(1:iip1,l)   = dufi(ijb:ijb+iim,l)
  ! !          dvfi_tmp(1:iip1,l)   = dvfi(ijb:ijb+iim,l)
  ! !          dtetafi_tmp(1:iip1,l)= dtetafi(ijb:ijb+iim,l)
  ! !          dqfi_tmp(1:iip1,l,:) = dqfi(ijb:ijb+iim,l,:)
  ! !          ENDDO
  ! !c$OMP END DO NOWAIT
  ! !
  ! !c$OMP MASTER
  ! !          dpfi_tmp(1:iip1)     = dpfi(ijb:ijb+iim)
  ! !c$OMP END MASTER
  ! !        endif ! of if ( .not. pole_nord)

  ! !c$OMP BARRIER
  ! !c$OMP MASTER
  ! !        call Set_Distrib(distrib_physic_bis)

  ! !        call VTb(VThallo)
  ! !c$OMP END MASTER
  ! !c$OMP BARRIER
  ! !
  ! !        call Register_Hallo_u(dufi,llm,
  ! !     *                      1,0,0,1,Request_physic)
  ! !
  ! !        call Register_Hallo_v(dvfi,llm,
  ! !     *                      1,0,0,1,Request_physic)
  ! !
  ! !        call Register_Hallo_u(dtetafi,llm,
  ! !     *                      1,0,0,1,Request_physic)
  ! !
  ! !        call Register_Hallo_u(dpfi,1,
  ! !     *                      1,0,0,1,Request_physic)
  ! !
  ! !        do j=1,nqtot
  ! !          call Register_Hallo_u(dqfi(ijb_u,1,j),llm,
  ! !     *                        1,0,0,1,Request_physic)
  ! !        enddo
  ! !
  ! !        call SendRequest(Request_Physic)
  ! !c$OMP BARRIER
  ! !        call WaitRequest(Request_Physic)
  ! !
  ! !c$OMP BARRIER
  ! !c$OMP MASTER
  ! !        call VTe(VThallo)
  ! !
  ! !        call set_Distrib(distrib_Physic)
  ! !c$OMP END MASTER
  ! !c$OMP BARRIER
  ! !                ijb=ij_begin
  ! !        if (.not. pole_nord) then
  ! !
  ! !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  ! !          DO l=1,llm
  ! !            dufi(ijb:ijb+iim,l) = dufi(ijb:ijb+iim,l)+dufi_tmp(1:iip1,l)
  ! !            dvfi(ijb:ijb+iim,l) = dvfi(ijb:ijb+iim,l)+dvfi_tmp(1:iip1,l)
  ! !            dtetafi(ijb:ijb+iim,l) = dtetafi(ijb:ijb+iim,l)
  ! !     &                              +dtetafi_tmp(1:iip1,l)
  ! !            dqfi(ijb:ijb+iim,l,:) = dqfi(ijb:ijb+iim,l,:)
  ! !     &                              + dqfi_tmp(1:iip1,l,:)
  ! !          ENDDO
  ! !c$OMP END DO NOWAIT
  ! !
  ! !c$OMP MASTER
  ! !          dpfi(ijb:ijb+iim)   = dpfi(ijb:ijb+iim)+ dpfi_tmp(1:iip1)
  ! !c$OMP END MASTER
  ! !
  ! !        endif ! of if (.not. pole_nord)

  ! #ifdef DEBUG_IO
  !     call WriteField_u('dufi',dufi)
  !     call WriteField_v('dvfi',dvfi)
  !     call WriteField_u('dtetafi',dtetafi)
  !     call WriteField_u('dpfi',dpfi)
  !     do j=1,nqtot
  !       call WriteField_u('dqfi'//trim(int2str(j)),dqfi(:,:,j))
  !    enddo
  ! #endif

  ! c$OMP BARRIER

  ! c      ajout des tendances physiques:
  ! c      ------------------------------
  ! #ifdef DEBUG_IO
  !     call WriteField_u('ucovfi',ucov)
  !     call WriteField_v('vcovfi',vcov)
  !     call WriteField_u('tetafi',teta)
  !         call WriteField_u('psfi',ps)
  !     do j=1,nqtot
  !       call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
  !    enddo
  ! #endif

  !      IF (ok_strato) THEN
  !        CALL top_bound_loc( vcov,ucov,teta,masse,dufi,dvfi,dtetafi)
  !      ENDIF

  ! #ifdef DEBUG_IO
  !     call WriteField_u('ucovfi',ucov)
  !     call WriteField_v('vcovfi',vcov)
  !     call WriteField_u('tetafi',teta)
  !         call WriteField_u('psfi',ps)
  !     do j=1,nqtot
  !       call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
  !    enddo
  ! #endif

  !       CALL addfi_loc( dtphys, leapf, forward   ,
  !  $                  ucov, vcov, teta , q   ,ps ,
  !  $                 dufi, dvfi, dtetafi , dqfi ,dpfi  )

  ! #ifdef DEBUG_IO
  !     call WriteField_u('ucovfi',ucov)
  !     call WriteField_v('vcovfi',vcov)
  !     call WriteField_u('tetafi',teta)
  !         call WriteField_u('psfi',ps)
  !     do j=1,nqtot
  !       call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
  !    enddo
  ! #endif

  ! c$OMP BARRIER
  ! c$OMP MASTER
  !     call VTe(VTphysiq)

  !     call VTb(VThallo)
  ! c$OMP END MASTER

  !     call SetTag(Request_physic,800)
  !     call Register_SwapField_u(ucov,ucov,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_v(vcov,vcov,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(teta,teta,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(masse,masse,
  !  *                               distrib_caldyn,Request_physic)

  !     call Register_SwapField_u(p,p,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(pk,pk,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(phis,phis,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(phi,phi,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call Register_SwapField_u(w,w,
  !  *                               distrib_caldyn,Request_physic)

  !     call Register_SwapField_u(q,q,
  !  *                               distrib_caldyn,Request_physic)
  !
  !     call SendRequest(Request_Physic)
  ! c$OMP BARRIER
  !     call WaitRequest(Request_Physic)

  ! c$OMP BARRIER
  ! c$OMP MASTER
  !    call VTe(VThallo)
  !    call set_distrib(distrib_caldyn)
  ! c$OMP END MASTER
  ! c$OMP BARRIER
  ! c
  ! c  Diagnostique de conservation de l'energie : difference
  !   IF (ip_ebil_dyn.ge.1 ) THEN
  !       ztit='bil phys'
  !       CALL diagedyn(ztit,2,1,1,dtphys
  !  e  , ucov    , vcov , ps, p ,pk , teta , q(:,:,1), q(:,:,2))
  !   ENDIF

  ! #ifdef DEBUG_IO
  !     call WriteField_u('ucovfi',ucov)
  !     call WriteField_v('vcovfi',vcov)
  !     call WriteField_u('tetafi',teta)
  !         call WriteField_u('psfi',ps)
  !     do j=1,nqtot
  !       call WriteField_u('qfi'//trim(int2str(j)),q(:,:,j))
  !    enddo
  ! #endif


  ! c-jld
!$OMP MASTER
     if (FirstPhysic) then
       ok_start_timer=.TRUE.
       FirstPhysic=.false.
     endif
!$OMP END MASTER
   ENDIF ! of IF( apphys )

   call check_isotopes(q,ijb_u,ije_u,'leapfrog 1132')
    ! !write(*,*) 'leapfrog 1134: iflag_phys=',iflag_phys

  IF(iflag_phys.EQ.2) THEN ! "Newtonian" case
!$OMP MASTER
     if (FirstPhysic) then
       ok_start_timer=.TRUE.
       FirstPhysic=.false.
     endif
!$OMP END MASTER


  !   Calcul academique de la physique = Rappel Newtonien + fritcion
  !   --------------------------------------------------------------
  !ym       teta(:,:)=teta(:,:)
  !ym     s  -iphysiq*dtvr*(teta(:,:)-tetarappel(:,:))/taurappel
   ijb=ij_begin
   ije=ij_end
  !LF       teta(ijb:ije,:)=teta(ijb:ije,:)
  !LF     s  -iphysiq*dtvr*(teta(ijb:ije,:)-tetarappel(ijb:ije,:))/taurappel
!$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
   do l=1,llm
   teta(ijb:ije,l)=teta(ijb:ije,l) -dtvr* &
         (teta(ijb:ije,l)-tetarappel(ijb:ije,l))* &
         (knewt_g+knewt_t(l)*clat4(ijb:ije))
   enddo
!$OMP END DO

!$OMP MASTER
   if (planet_type.eq."giant") then
     ! ! add an intrinsic heat flux at the base of the atmosphere
     teta(ijb:ije,1) = teta(ijb:ije,1) &
           + dtvr * aire(ijb:ije) * ihf / cpp / masse(ijb:ije,1)
   endif
!$OMP END MASTER
!$OMP BARRIER


   call Register_Hallo_u(ucov,llm,0,1,1,0,Request_Physic)
   call Register_Hallo_v(vcov,llm,1,1,1,1,Request_Physic)
   call SendRequest(Request_Physic)
!$OMP BARRIER
   call WaitRequest(Request_Physic)
!$OMP BARRIER
   call friction_loc(ucov,vcov,dtvr)
!$OMP BARRIER

    ! ! Sponge layer (if any)
    IF (ok_strato) THEN
      CALL top_bound_loc(vcov,ucov,teta,masse,dtvr)
!$OMP BARRIER
    ENDIF ! of IF (ok_strato)
  ENDIF ! of IF(iflag_phys.EQ.2)


    CALL pression_loc ( ip1jmp1, ap, bp, ps, p                  )
!$OMP BARRIER
    if (pressure_exner) then
    CALL exner_hyb_loc( ijnb_u, ps, p, pks, pk, pkf )
    else
      CALL exner_milieu_loc( ijnb_u, ps, p, pks, pk, pkf )
    endif
!$OMP BARRIER
    CALL massdair_loc(p,masse)
!$OMP BARRIER

  !c$OMP END PARALLEL
    call check_isotopes(q,ijb_u,ije_u,'leapfrog 1196')

  !-----------------------------------------------------------------------
  !   dissipation horizontale et verticale  des petites echelles:
  !   ----------------------------------------------------------
  ! !write(*,*) 'leapfrog 1163: apdiss=',apdiss
  IF(apdiss) THEN

    CALL call_dissip(ucov,vcov,teta,p,pk,ps)
  !cc$OMP  PARALLEL DEFAULT(SHARED)
  !cc$OMP+          PRIVATE(ijb,ije,tppn,tpn,tpps,tps)
  !c$OMP MASTER
     ! call suspend_timer(timer_caldyn)
  !
  !c       print*,'Entree dans la dissipation : Iteration No ',true_itau
  !c   calcul de l'energie cinetique avant dissipation
  !c       print *,'Passage dans la dissipation'

  !    call VTb(VThallo)
  !c$OMP END MASTER

  !c$OMP BARRIER

  !    call Register_SwapField_u(ucov,ucov,distrib_dissip,
  ! *                            Request_dissip,up=1,down=1)

  !    call Register_SwapField_v(vcov,vcov,distrib_dissip,
  ! *                            Request_dissip,up=1,down=1)

  !    call Register_SwapField_u(teta,teta,distrib_dissip,
  ! *                            Request_dissip)

  !    call Register_SwapField_u(p,p,distrib_dissip,
  ! *                            Request_dissip)

  !    call Register_SwapField_u(pk,pk,distrib_dissip,
  ! *                            Request_dissip)

  !    call SendRequest(Request_dissip)
  !c$OMP BARRIER
  !    call WaitRequest(Request_dissip)

  !c$OMP BARRIER
  !c$OMP MASTER
  !    call set_distrib(distrib_dissip)
  !    call VTe(VThallo)
  !    call VTb(VTdissipation)
  !    call start_timer(timer_dissip)
  !c$OMP END MASTER
  !c$OMP BARRIER

  !    call covcont_loc(llm,ucov,vcov,ucont,vcont)
  !    call enercin_loc(vcov,ucov,vcont,ucont,ecin0)

  !c   dissipation

  !!        CALL FTRACE_REGION_BEGIN("dissip")
  !    CALL dissip_loc(vcov,ucov,teta,p,dvdis,dudis,dtetadis)

  !#ifdef DEBUG_IO
  !    call WriteField_u('dudis',dudis)
  !    call WriteField_v('dvdis',dvdis)
  !    call WriteField_u('dtetadis',dtetadis)
  !#endif
  !
  !!      CALL FTRACE_REGION_END("dissip")
  !
  !    ijb=ij_begin
  !    ije=ij_end
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !    DO l=1,llm
  !      ucov(ijb:ije,l)=ucov(ijb:ije,l)+dudis(ijb:ije,l)
  !    ENDDO
  !c$OMP END DO NOWAIT
  !    if (pole_sud) ije=ije-iip1
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !    DO l=1,llm
  !      vcov(ijb:ije,l)=vcov(ijb:ije,l)+dvdis(ijb:ije,l)
  !    ENDDO
  !c$OMP END DO NOWAIT

  !c       teta=teta+dtetadis


  !c------------------------------------------------------------------------
  !    if (dissip_conservative) then
  !C       On rajoute la tendance due a la transform. Ec -> E therm. cree
  !C       lors de la dissipation
  !c$OMP BARRIER
  !c$OMP MASTER
  !        call suspend_timer(timer_dissip)
  !        call VTb(VThallo)
  !c$OMP END MASTER
  !        call Register_Hallo_u(ucov,llm,1,1,1,1,Request_Dissip)
  !        call Register_Hallo_v(vcov,llm,1,1,1,1,Request_Dissip)
  !        call SendRequest(Request_Dissip)
  !c$OMP BARRIER
  !        call WaitRequest(Request_Dissip)
  !c$OMP MASTER
  !        call VTe(VThallo)
  !        call resume_timer(timer_dissip)
  !c$OMP END MASTER
  !c$OMP BARRIER
  !        call covcont_loc(llm,ucov,vcov,ucont,vcont)
  !        call enercin_loc(vcov,ucov,vcont,ucont,ecin)
  !
  !        ijb=ij_begin
  !        ije=ij_end
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !        do l=1,llm
  !          do ij=ijb,ije
  !            dtetaecdt(ij,l)= (ecin0(ij,l)-ecin(ij,l))/ pk(ij,l)
  !            dtetadis(ij,l)=dtetadis(ij,l)+dtetaecdt(ij,l)
  !          enddo
  !        enddo
  !c$OMP END DO NOWAIT
  !   endif

  !   ijb=ij_begin
  !   ije=ij_end
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !     do l=1,llm
  !       do ij=ijb,ije
  !          teta(ij,l)=teta(ij,l)+dtetadis(ij,l)
  !       enddo
  !     enddo
  !c$OMP END DO NOWAIT
  !c------------------------------------------------------------------------


  !c    .......        P. Le Van (  ajout  le 17/04/96  )   ...........
  !c   ...      Calcul de la valeur moyenne, unique de h aux poles  .....
  !c

  !    ijb=ij_begin
  !    ije=ij_end
  !
  !    if (pole_nord) then
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !      DO l  =  1, llm
  !        DO ij =  1,iim
  !         tppn(ij)  = aire(  ij    ) * teta(  ij    ,l)
  !        ENDDO
  !         tpn  = SSUM(iim,tppn,1)/apoln

  !        DO ij = 1, iip1
  !         teta(  ij    ,l) = tpn
  !        ENDDO
  !      ENDDO
  !c$OMP END DO NOWAIT

  !c$OMP MASTER
  !      DO ij =  1,iim
  !        tppn(ij)  = aire(  ij    ) * ps (  ij    )
  !      ENDDO
  !        tpn  = SSUM(iim,tppn,1)/apoln
  !
  !      DO ij = 1, iip1
  !        ps(  ij    ) = tpn
  !      ENDDO
  !c$OMP END MASTER
  !    endif
  !
  !    if (pole_sud) then
  !c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  !      DO l  =  1, llm
  !        DO ij =  1,iim
  !         tpps(ij)  = aire(ij+ip1jm) * teta(ij+ip1jm,l)
  !        ENDDO
  !         tps  = SSUM(iim,tpps,1)/apols

  !        DO ij = 1, iip1
  !         teta(ij+ip1jm,l) = tps
  !        ENDDO
  !      ENDDO
  !c$OMP END DO NOWAIT

  !c$OMP MASTER
  !      DO ij =  1,iim
  !        tpps(ij)  = aire(ij+ip1jm) * ps (ij+ip1jm)
  !      ENDDO
  !        tps  = SSUM(iim,tpps,1)/apols
  !
  !      DO ij = 1, iip1
  !        ps(ij+ip1jm) = tps
  !      ENDDO
  !c$OMP END MASTER
  !    endif


  !c$OMP BARRIER
  !c$OMP MASTER
  !    call VTe(VTdissipation)

  !    call stop_timer(timer_dissip)
  !
  !    call VTb(VThallo)
  !c$OMP END MASTER
  !    call Register_SwapField_u(ucov,ucov,distrib_caldyn,
  ! *                            Request_dissip)

  !    call Register_SwapField_v(vcov,vcov,distrib_caldyn,
  ! *                            Request_dissip)

  !    call Register_SwapField_u(teta,teta,distrib_caldyn,
  ! *                            Request_dissip)

  !    call Register_SwapField_u(p,p,distrib_caldyn,
  ! *                            Request_dissip)

  !    call Register_SwapField_u(pk,pk,distrib_caldyn,
  ! *                            Request_dissip)

  !    call SendRequest(Request_dissip)
  !c$OMP BARRIER
  !    call WaitRequest(Request_dissip)

  !c$OMP BARRIER
  !c$OMP MASTER
  !    call set_distrib(distrib_caldyn)
  !    call VTe(VThallo)
  !    call resume_timer(timer_caldyn)
  !c        print *,'fin dissipation'
  !c$OMP END MASTER
  !c$OMP BARRIER
   END IF ! of IF(apdiss)

  !c$OMP END PARALLEL

  ! ajout debug
           ! IF( lafin ) then
           !   abort_message = 'Simulation finished'
           !   call abort_gcm(modname,abort_message,0)
           ! ENDIF

   call check_isotopes(q,ijb_u,ije_u,'leapfrog 1430')

  !   ********************************************************************
  !   ********************************************************************
  !   .... fin de l'integration dynamique  et physique pour le pas itau ..
  !   ********************************************************************
  !   ********************************************************************

  !   preparation du pas d'integration suivant  ......
  !ym      call WriteField('ucov',reshape(ucov,(/iip1,jmp1,llm/)))
  !ym      call WriteField('vcov',reshape(vcov,(/iip1,jjm,llm/)))
!$OMP MASTER
  call stop_timer(timer_caldyn)
!$OMP END MASTER
  IF (itau==itaumax) then
!$OMP MASTER
     call allgather_timer_average
     call barrier
     if (mpi_rank==0) then

        print *,'*********************************'
        print *,'******    TIMER CALDYN     ******'
        do i=0,mpi_size-1
           print *,'proc',i,' :   Nb Bandes  :',jj_nb_caldyn(i), &
                 '  : temps moyen :', &
                 timer_average(jj_nb_caldyn(i),timer_caldyn,i)
        enddo

        print *,'*********************************'
        print *,'******    TIMER VANLEER    ******'
        do i=0,mpi_size-1
           print *,'proc',i,' :   Nb Bandes  :',jj_nb_vanleer(i), &
                 '  : temps moyen :', &
                 timer_average(jj_nb_vanleer(i),timer_vanleer,i)
        enddo

        print *,'*********************************'
        print *,'******    TIMER DISSIP    ******'
        do i=0,mpi_size-1
           print *,'proc',i,' :   Nb Bandes  :',jj_nb_dissip(i), &
                 '  : temps moyen :', &
                 timer_average(jj_nb_dissip(i),timer_dissip,i)
        enddo

        print *,'*********************************'
        print *,'******    TIMER PHYSIC    ******'
        do i=0,mpi_size-1
           print *,'proc',i,' :   Nb Bandes  :',jj_nb_physic(i), &
                 '  : temps moyen :', &
                 timer_average(jj_nb_physic(i),timer_physic,i)
        enddo

     endif
     CALL barrier
     print *,'Taille du Buffer MPI (REAL*8)',MaxBufferSize
  print *,'Taille du Buffer MPI utilise (REAL*8)',MaxBufferSize_Used
   print *, 'Temps total ecoule sur la parallelisation :',DiffTime()
  print *, 'Temps CPU ecoule sur la parallelisation :',DiffCpuTime()
     CALL print_filtre_timer
!$OMP END MASTER
     CALL dynredem1_loc("restart.nc",0.0, &
           vcov,ucov,teta,q,masse,ps)
!$OMP MASTER
     call fin_getparam
!$OMP END MASTER

     if (ok_guide) then
       ! ! set ok_guide to false to avoid extra output
       ! ! in following forward step
       ok_guide=.false.
     endif

IF (CPPKEY_INCA) THEN
     IF (ANY(type_trac == ['inca','inco'])) THEN
        CALL finalize_inca
  ! switching back to LMDZDYN context
!$OMP MASTER
        IF (ok_dyn_xios) THEN
           CALL xios_set_current_context(dyn3d_ctx_handle)
        ENDIF
!$OMP END MASTER
     ENDIF
END IF
IF (CPPKEY_REPROBUS) THEN
     if (type_trac == 'repr') CALL finalize_reprobus
END IF

!$OMP MASTER
     call finalize_parallel
!$OMP END MASTER
!$OMP BARRIER
     RETURN
  ENDIF

  call check_isotopes(q,ijb_u,ije_u,'leapfrog 1509')

  IF ( .NOT.purmats ) THEN
    ! ........................................................
    ! ..............  schema matsuno + leapfrog  ..............
    ! ........................................................

        IF(forward.OR. leapf) THEN
          itau= itau + 1
           ! iday= day_ini+itau/day_step
           ! time= REAL(itau-(iday-day_ini)*day_step)/day_step+time_0
           !   IF(time.GT.1.) THEN
           !     time = time-1.
           !     iday = iday+1
           !   ENDIF
        ENDIF


        IF( itau.EQ. itaufinp1 ) then

          if (flag_verif) then
            write(79,*) 'ucov',ucov
            write(80,*) 'vcov',vcov
            write(81,*) 'teta',teta
            write(82,*) 'ps',ps
            write(83,*) 'q',q
            WRITE(85,*) 'q1 = ',q(:,:,1)
            WRITE(86,*) 'q3 = ',q(:,:,3)
          endif


!$OMP MASTER
          call fin_getparam
!$OMP END MASTER

IF (CPPKEY_INCA) THEN
          IF (ANY(type_trac == ['inca','inco'])) THEN
             CALL finalize_inca
  ! switching back to LMDZDYN context
!$OMP MASTER
             IF (ok_dyn_xios) THEN
                CALL xios_set_current_context(dyn3d_ctx_handle)
             ENDIF
!$OMP END MASTER
          ENDIF
END IF
IF (CPPKEY_REPROBUS) THEN
          if (type_trac == 'repr') CALL finalize_reprobus
END IF

!$OMP MASTER
          call finalize_parallel
!$OMP END MASTER
          abort_message = 'Simulation finished'
          call abort_gcm(modname,abort_message,0)
          RETURN
        ENDIF
  !-----------------------------------------------------------------------
  !   ecriture du fichier histoire moyenne:
  !   -------------------------------------

        IF(MOD(itau,iperiod).EQ.0 .OR. itau.EQ.itaufin) THEN
!$OMP BARRIER
           IF(itau.EQ.itaufin) THEN
              iav=1
           ELSE
              iav=0
           ENDIF

          ! ! Ehouarn: re-compute geopotential for outputs
!$OMP BARRIER
!$OMP MASTER
          CALL geopot_loc(ip1jmp1,teta,pk,pks,phis,phi)
!$OMP END MASTER
!$OMP BARRIER

         IF (ok_dynzon) THEN

          CALL bilan_dyn_loc(2,dtvr*iperiod,dtvr*day_step*periodav, &
                ps,masse,pk,pbaru,pbarv,teta,phi,ucov,vcov,q)

          ENDIF !ok_dynzon

          IF (ok_dyn_ave) THEN
             CALL writedynav_loc(itau,vcov, &
                   ucov,teta,pk,phi,q,masse,ps,phis)
          ENDIF



        ENDIF

        call check_isotopes(q,ijb_u,ije_u,'leapfrog 1584')

  !-----------------------------------------------------------------------
  !   ecriture de la bande histoire:
  !   ------------------------------

        IF( MOD(itau,iecri).EQ.0) THEN
         ! ! Ehouarn: output only during LF or Backward Matsuno
         if (leapf.or.(.not.leapf.and.(.not.forward))) then

!$OMP BARRIER
!$OMP MASTER
          CALL geopot_loc(ip1jmp1,teta,pk,pks,phis,phi)
!$OMP END MASTER
!$OMP BARRIER

         if (ok_dyn_ins) then
             CALL writehist_loc(itau,vcov,ucov,teta,pk,phi,q, &
                   masse,ps,phis)
         endif


          IF (ok_dyn_xios) THEN
!$OMP MASTER
             CALL xios_update_calendar(itau)
!$OMP END MASTER
!$OMP BARRIER
             CALL writedyn_xios(vcov, &
                   ucov,teta,pk,phi,q,masse,ps,phis)
          ENDIF

      endif                 ! of if (leapf.or.(.not.leapf.and.(.not.forward)))


       ENDIF ! of IF(MOD(itau,iecri).EQ.0)

        IF(itau.EQ.itaufin) THEN

!$OMP BARRIER

           ! if (planet_type.eq."earth") then
  ! Write an Earth-format restart file
            CALL dynredem1_loc("restart.nc",0.0, &
                  vcov,ucov,teta,q,masse,ps)
           ! endif ! of if (planet_type.eq."earth")
            if (ok_guide) then
              ! ! set ok_guide to false to avoid extra output
              ! ! in following forward step
              ok_guide=.false.
            endif

           ! CLOSE(99)
        ENDIF ! of IF (itau.EQ.itaufin)

        call check_isotopes(q,ijb_u,ije_u,'leapfrog 1624')

  !-----------------------------------------------------------------------
  !   gestion de l'integration temporelle:
  !   ------------------------------------

        IF( MOD(itau,iperiod).EQ.0 )    THEN
                GO TO 1
        ELSE IF ( MOD(itau-1,iperiod).EQ. 0 ) THEN

               IF( forward )  THEN
   ! fin du pas forward et debut du pas backward

                  forward = .FALSE.
                    leapf = .FALSE.
                       GO TO 2

               ELSE
   ! fin du pas backward et debut du premier pas leapfrog

                    leapf =  .TRUE.
                    dt  =  2.*dtvr
                    GO TO 2
               END IF
        ELSE

   ! ......   pas leapfrog  .....

             leapf = .TRUE.
             dt  = 2.*dtvr
             GO TO 2
        END IF ! of IF (MOD(itau,iperiod).EQ.0)
               ! !    ELSEIF (MOD(itau-1,iperiod).EQ.0)


  ELSE ! of IF (.not.purmats)


    call check_isotopes(q,ijb_u,ije_u,'leapfrog 1664')

    ! ........................................................
    ! ..............       schema  matsuno        ...............
    ! ........................................................
        IF( forward )  THEN

         itau =  itau + 1
          ! iday = day_ini+itau/day_step
          ! time = REAL(itau-(iday-day_ini)*day_step)/day_step+time_0
  !
  !              IF(time.GT.1.) THEN
  !               time = time-1.
  !               iday = iday+1
  !              ENDIF

           forward =  .FALSE.
           IF( itau.EQ. itaufinp1 ) then
!$OMP MASTER
             call fin_getparam
!$OMP END MASTER

IF (CPPKEY_INCA) THEN
             IF (ANY(type_trac == ['inca','inco'])) THEN
                CALL finalize_inca
  ! switching back to LMDZDYN context
!$OMP MASTER
                IF (ok_dyn_xios) THEN
                   CALL xios_set_current_context(dyn3d_ctx_handle)
                ENDIF
!$OMP END MASTER
             ENDIF

END IF
IF (CPPKEY_REPROBUS) THEN
             if (type_trac == 'repr') CALL finalize_reprobus
END IF

!$OMP MASTER
             call finalize_parallel
!$OMP END MASTER
             abort_message = 'Simulation finished'
             call abort_gcm(modname,abort_message,0)
             RETURN
           ENDIF
           GO TO 2

        ELSE ! of IF(forward) i.e. backward step


          call check_isotopes(q,ijb_u,ije_u,'leapfrog 1698')

          IF(MOD(itau,iperiod).EQ.0 .OR. itau.EQ.itaufin) THEN
           IF(itau.EQ.itaufin) THEN
              iav=1
           ELSE
              iav=0
           ENDIF

          ! ! Ehouarn: re-compute geopotential for outputs
!$OMP BARRIER
!$OMP MASTER
          CALL geopot_loc(ip1jmp1,teta,pk,pks,phis,phi)
!$OMP END MASTER
!$OMP BARRIER

           IF (ok_dynzon) THEN
           CALL bilan_dyn_loc(2,dtvr*iperiod,dtvr*day_step*periodav, &
                 ps,masse,pk,pbaru,pbarv,teta,phi,ucov,vcov,q)
           ENDIF

           IF (ok_dyn_ave) THEN
             CALL writedynav_loc(itau,vcov, &
                   ucov,teta,pk,phi,q,masse,ps,phis)
           ENDIF



          ENDIF ! of IF(MOD(itau,iperiod).EQ.0 .OR. itau.EQ.itaufin)


           IF(MOD(itau,iecri         ).EQ.0) THEN

!$OMP BARRIER
!$OMP MASTER
          CALL geopot_loc(ip1jmp1,teta,pk,pks,phis,phi)
!$OMP END MASTER
!$OMP BARRIER


          if (ok_dyn_ins) then
             CALL writehist_loc(itau,vcov,ucov,teta,pk,phi,q, &
                   masse,ps,phis)
          endif ! of if (ok_dyn_ins)


          IF (ok_dyn_xios) THEN
!$OMP MASTER
             CALL xios_update_calendar(itau)
!$OMP END MASTER
!$OMP BARRIER
             CALL writedyn_xios(vcov, &
                   ucov,teta,pk,phi,q,masse,ps,phis)
          ENDIF

       ENDIF                ! of IF(MOD(itau,iecri).EQ.0)


          IF(itau.EQ.itaufin) THEN
             ! if (planet_type.eq."earth") then
               CALL dynredem1_loc("restart.nc",0.0, &
                     vcov,ucov,teta,q,masse,ps)
            ! endif ! of if (planet_type.eq."earth")
            if (ok_guide) then
              ! ! set ok_guide to false to avoid extra output
              ! ! in following forward step
              ok_guide=.false.
            endif

          ENDIF ! of IF(itau.EQ.itaufin)

          forward = .TRUE.
          GO TO  1

        ENDIF ! of IF (forward)


        call check_isotopes(q,ijb_u,ije_u,'leapfrog 1750')

  END IF ! of IF(.not.purmats)
!$OMP MASTER
  call fin_getparam
!$OMP END MASTER

IF (CPPKEY_INCA) THEN
  IF (ANY(type_trac == ['inca','inco'])) THEN
     CALL finalize_inca
  ! switching back to LMDZDYN context
!$OMP MASTER
     IF (ok_dyn_xios) THEN
        CALL xios_set_current_context(dyn3d_ctx_handle)
     ENDIF
!$OMP END MASTER
  ENDIF

END IF
IF (CPPKEY_REPROBUS) THEN
  if (type_trac == 'repr') CALL finalize_reprobus
END IF

!$OMP MASTER
  call finalize_parallel
!$OMP END MASTER
  abort_message = 'Simulation finished'
  call abort_gcm(modname,abort_message,0)
  RETURN
END SUBROUTINE leapfrog_loc