source: LMDZ6/trunk/libf/dyn3dmem/iniacademic_loc.F90 @ 4113

Last change on this file since 4113 was 4056, checked in by dcugnet, 2 years ago

Most of the changes are intended to help to eventually remove the constraints about the tracers assumptions, in particular water tracers.

  • Remove index tables itr_indice and niadv, replaced by tracers(:)%isAdvected and tracers(:)%isH2OFamily. Most of the loops are now from 1 to nqtot:
    • DO iq=nqo+1,nqtot loops are replaced with: DO iq=1,nqtot

IF(tracers(iq)%isH2Ofamily) CYCLE

  • DO it=1,nbtr; iq=niadv(it+nqo)

and DO it=1,nqtottr; iq=itr_indice(it) loops are replaced with:

it = 0
DO iq = 1, nqtot

IF(.NOT.tracers(iq)%isAdvected .OR. tracers(iq)%isH2Ofamily) CYCLE
it = it+1

  • Move some StratAer? related code from infotrac to infotrac_phy
  • Remove "nqperes" variable:

DO iq=1,nqpere loops are replaced with:
DO iq=1,nqtot

IF(tracers(iq)%parent/='air') CYCLE

  • Cosmetic changes (justification, SELECT CASE instead of multiple IF...) mostly in advtrac* routines.
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
File size: 11.0 KB
Line 
1!
2! $Id: iniacademic.F90 1625 2012-05-09 13:14:48Z lguez $
3!
4SUBROUTINE iniacademic_loc(vcov,ucov,teta,q,masse,ps,phis,time_0)
5
6  USE filtreg_mod, ONLY: inifilr
7  USE infotrac,    ONLY: nqtot, niso_possibles, ok_isotopes, ok_iso_verif, tnat, alpha_ideal, &
8                         iqiso, tracers, iso_indnum
9  USE control_mod, ONLY: day_step,planet_type
10  use exner_hyb_m, only: exner_hyb
11  use exner_milieu_m, only: exner_milieu
12  USE parallel_lmdz, ONLY: ijb_u, ije_u, ijb_v, ije_v
13#ifdef CPP_IOIPSL
14  USE IOIPSL, ONLY: getin
15#else
16  ! if not using IOIPSL, we still need to use (a local version of) getin
17  USE ioipsl_getincom, ONLY: getin
18#endif
19  USE Write_Field
20  USE comconst_mod, ONLY: cpp, kappa, g, daysec, dtvr, pi, im, jm
21  USE logic_mod, ONLY: iflag_phys, read_start
22  USE comvert_mod, ONLY: ap, bp, preff, presnivs, pressure_exner
23  USE temps_mod, ONLY: annee_ref, day_ini, day_ref
24  USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0
25
26  !   Author:    Frederic Hourdin      original: 15/01/93
27  ! The forcing defined here is from Held and Suarez, 1994, Bulletin
28  ! of the American Meteorological Society, 75, 1825.
29
30  IMPLICIT NONE
31
32  !   Declararations:
33  !   ---------------
34
35  include "dimensions.h"
36  include "paramet.h"
37  include "comgeom.h"
38  include "academic.h"
39  include "iniprint.h"
40
41  !   Arguments:
42  !   ----------
43
44  REAL,INTENT(OUT) :: time_0
45
46  !   fields
47  REAL,INTENT(OUT) :: vcov(ijb_v:ije_v,llm) ! meridional covariant wind
48  REAL,INTENT(OUT) :: ucov(ijb_u:ije_u,llm) ! zonal covariant wind
49  REAL,INTENT(OUT) :: teta(ijb_u:ije_u,llm) ! potential temperature (K)
50  REAL,INTENT(OUT) :: q(ijb_u:ije_u,llm,nqtot) ! advected tracers (.../kg_of_air)
51  REAL,INTENT(OUT) :: ps(ijb_u:ije_u) ! surface pressure (Pa)
52  REAL,INTENT(OUT) :: masse(ijb_u:ije_u,llm) ! air mass in grid cell (kg)
53  REAL,INTENT(OUT) :: phis(ijb_u:ije_u) ! surface geopotential
54
55  !   Local:
56  !   ------
57
58  REAL,ALLOCATABLE :: vcov_glo(:,:),ucov_glo(:,:),teta_glo(:,:)
59  REAL,ALLOCATABLE :: q_glo(:,:),masse_glo(:,:),ps_glo(:)
60  REAL,ALLOCATABLE :: phis_glo(:)
61  REAL p (ip1jmp1,llmp1  )               ! pression aux interfac.des couches
62  REAL pks(ip1jmp1)                      ! exner au  sol
63  REAL pk(ip1jmp1,llm)                   ! exner au milieu des couches
64  REAL phi(ip1jmp1,llm)                  ! geopotentiel
65  REAL ddsin,zsig,tetapv,w_pv  ! variables auxiliaires
66  real tetastrat ! potential temperature in the stratosphere, in K
67  real tetajl(jjp1,llm)
68  INTEGER i,j,l,lsup,ij, iq, iName, iZone, iPhase, iqParent
69
70  REAL teta0,ttp,delt_y,delt_z,eps ! Constantes pour profil de T
71  REAL k_f,k_c_a,k_c_s         ! Constantes de rappel
72  LOGICAL ok_geost             ! Initialisation vent geost. ou nul
73  LOGICAL ok_pv                ! Polar Vortex
74  REAL phi_pv,dphi_pv,gam_pv,tetanoise   ! Constantes pour polar vortex
75
76  real zz,ran1
77  integer idum
78
79  REAL zdtvr
80 
81  character(len=*),parameter :: modname="iniacademic"
82  character(len=80) :: abort_message
83
84  ! Sanity check: verify that options selected by user are not incompatible
85  if ((iflag_phys==1).and. .not. read_start) then
86    write(lunout,*) trim(modname)," error: if read_start is set to ", &
87    " false then iflag_phys should not be 1"
88    write(lunout,*) "You most likely want an aquaplanet initialisation", &
89    " (iflag_phys >= 100)"
90    call abort_gcm(modname,"incompatible iflag_phys==1 and read_start==.false.",1)
91  endif
92 
93  !-----------------------------------------------------------------------
94  ! 1. Initializations for Earth-like case
95  ! --------------------------------------
96  !
97  ! initialize planet radius, rotation rate,...
98  call conf_planete
99
100  time_0=0.
101  day_ref=1
102  ! annee_ref=0
103
104  im         = iim
105  jm         = jjm
106  day_ini    = 1
107  dtvr    = daysec/REAL(day_step)
108  zdtvr=dtvr
109  etot0      = 0.
110  ptot0      = 0.
111  ztot0      = 0.
112  stot0      = 0.
113  ang0       = 0.
114
115  if (llm == 1) then
116     ! specific initializations for the shallow water case
117     kappa=1
118  endif
119
120  CALL iniconst
121  CALL inigeom
122  CALL inifilr
123
124  ! Initialize pressure and mass field if read_start=.false.
125  IF (.NOT. read_start) THEN
126    ! allocate global fields:
127!    allocate(vcov_glo(ip1jm,llm))
128    allocate(ucov_glo(ip1jmp1,llm))
129    allocate(teta_glo(ip1jmp1,llm))
130    allocate(ps_glo(ip1jmp1))
131    allocate(masse_glo(ip1jmp1,llm))
132    allocate(phis_glo(ip1jmp1))
133
134     ! surface pressure
135     if (iflag_phys>2) then
136        ! specific value for CMIP5 aqua/terra planets
137        ! "Specify the initial dry mass to be equivalent to
138        !  a global mean surface pressure (101325 minus 245) Pa."
139        ps_glo(:)=101080. 
140     else
141        ! use reference surface pressure
142        ps_glo(:)=preff
143     endif
144
145     ! ground geopotential
146     phis_glo(:)=0.
147     CALL pression ( ip1jmp1, ap, bp, ps_glo, p       )
148     if (pressure_exner) then
149       CALL exner_hyb( ip1jmp1, ps_glo, p, pks, pk )
150     else
151       call exner_milieu(ip1jmp1,ps_glo,p,pks,pk)
152     endif
153     CALL massdair(p,masse_glo)
154  ENDIF
155
156  if (llm == 1) then
157     ! initialize fields for the shallow water case, if required
158     if (.not.read_start) then
159        phis(ijb_u:ije_u)=0.
160        q(ijb_u:ije_u,1:llm,1:nqtot)=0
161        CALL sw_case_williamson91_6_loc(vcov,ucov,teta,masse,ps)
162     endif
163  endif
164
165  academic_case: if (iflag_phys >= 2) then
166     ! initializations
167
168     ! 1. local parameters
169     ! by convention, winter is in the southern hemisphere
170     ! Geostrophic wind or no wind?
171     ok_geost=.TRUE.
172     CALL getin('ok_geost',ok_geost)
173     ! Constants for Newtonian relaxation and friction
174     k_f=1.                !friction
175     CALL getin('k_j',k_f)
176     k_f=1./(daysec*k_f)
177     k_c_s=4.  !cooling surface
178     CALL getin('k_c_s',k_c_s)
179     k_c_s=1./(daysec*k_c_s)
180     k_c_a=40. !cooling free atm
181     CALL getin('k_c_a',k_c_a)
182     k_c_a=1./(daysec*k_c_a)
183     ! Constants for Teta equilibrium profile
184     teta0=315.     ! mean Teta (S.H. 315K)
185     CALL getin('teta0',teta0)
186     ttp=200.       ! Tropopause temperature (S.H. 200K)
187     CALL getin('ttp',ttp)
188     eps=0.         ! Deviation to N-S symmetry(~0-20K)
189     CALL getin('eps',eps)
190     delt_y=60.     ! Merid Temp. Gradient (S.H. 60K)
191     CALL getin('delt_y',delt_y)
192     delt_z=10.     ! Vertical Gradient (S.H. 10K)
193     CALL getin('delt_z',delt_z)
194     ! Polar vortex
195     ok_pv=.false.
196     CALL getin('ok_pv',ok_pv)
197     phi_pv=-50.            ! Latitude of edge of vortex
198     CALL getin('phi_pv',phi_pv)
199     phi_pv=phi_pv*pi/180.
200     dphi_pv=5.             ! Width of the edge
201     CALL getin('dphi_pv',dphi_pv)
202     dphi_pv=dphi_pv*pi/180.
203     gam_pv=4.              ! -dT/dz vortex (in K/km)
204     CALL getin('gam_pv',gam_pv)
205     tetanoise=0.005
206     CALL getin('tetanoise',tetanoise)
207
208     ! 2. Initialize fields towards which to relax
209     ! Friction
210     knewt_g=k_c_a
211     DO l=1,llm
212        zsig=presnivs(l)/preff
213        knewt_t(l)=(k_c_s-k_c_a)*MAX(0.,(zsig-0.7)/0.3)
214        kfrict(l)=k_f*MAX(0.,(zsig-0.7)/0.3)
215     ENDDO
216     DO j=1,jjp1
217        clat4((j-1)*iip1+1:j*iip1)=cos(rlatu(j))**4
218     ENDDO
219
220     ! Potential temperature
221     DO l=1,llm
222        zsig=presnivs(l)/preff
223        tetastrat=ttp*zsig**(-kappa)
224        tetapv=tetastrat
225        IF ((ok_pv).AND.(zsig.LT.0.1)) THEN
226           tetapv=tetastrat*(zsig*10.)**(kappa*cpp*gam_pv/1000./g)
227        ENDIF
228        DO j=1,jjp1
229           ! Troposphere
230           ddsin=sin(rlatu(j))
231           tetajl(j,l)=teta0-delt_y*ddsin*ddsin+eps*ddsin &
232                -delt_z*(1.-ddsin*ddsin)*log(zsig)
233           if (planet_type=="giant") then
234             tetajl(j,l)=teta0+(delt_y*                   &
235                ((sin(rlatu(j)*3.14159*eps+0.0001))**2)   &
236                / ((rlatu(j)*3.14159*eps+0.0001)**2))     &
237                -delt_z*log(zsig)
238           endif
239           ! Profil stratospherique isotherme (+vortex)
240           w_pv=(1.-tanh((rlatu(j)-phi_pv)/dphi_pv))/2.
241           tetastrat=tetastrat*(1.-w_pv)+tetapv*w_pv             
242           tetajl(j,l)=MAX(tetajl(j,l),tetastrat) 
243        ENDDO
244     ENDDO
245
246     !          CALL writefield('theta_eq',tetajl)
247
248     do l=1,llm
249        do j=1,jjp1
250           do i=1,iip1
251              ij=(j-1)*iip1+i
252              tetarappel(ij,l)=tetajl(j,l)
253           enddo
254        enddo
255     enddo
256
257     ! 3. Initialize fields (if necessary)
258     IF (.NOT. read_start) THEN
259        ! bulk initialization of temperature
260        IF (iflag_phys>10000) THEN
261        ! Particular case to impose a constant temperature T0=0.01*iflag_phys
262           teta_glo(:,:)= 0.01*iflag_phys/(pk(:,:)/cpp)
263        ELSE
264           teta_glo(:,:)=tetarappel(:,:)
265        ENDIF
266        ! geopotential
267        CALL geopot(ip1jmp1,teta_glo,pk,pks,phis_glo,phi)
268
269        ! winds
270        if (ok_geost) then
271           call ugeostr(phi,ucov_glo)
272        else
273           ucov_glo(:,:)=0.
274        endif
275        vcov(ijb_v:ije_v,1:llm)=0.
276
277        ! bulk initialization of tracers
278        if (planet_type=="earth") then
279           ! Earth: first two tracers will be water
280           do iq=1,nqtot
281              q(ijb_u:ije_u,:,iq)=0.
282!              IF(tracers(iq)%name == 'H2O'//phases_sep//'g') q(ijb_u:ije_u,:,iq)=1.e-10
283!              IF(tracers(iq)%name == 'H2O'//phases_sep//'l') q(ijb_u:ije_u,:,iq)=1.e-15
284              IF(tracers(iq)%name == 'H2Ov') q(ijb_u:ije_u,:,iq)=1.e-10
285              IF(tracers(iq)%name == 'H2Ol') q(ijb_u:ije_u,:,iq)=1.e-15
286
287              ! CRisi: init des isotopes
288              ! distill de Rayleigh très simplifiée
289              iName = tracers(iq)%iso_iName
290              if (.NOT.ok_isotopes .OR. iName <= 0) CYCLE
291              iZone    = tracers(iq)%iso_iZone
292              iPhase   = tracers(iq)%iso_iPhase
293              iqParent = tracers(iq)%iqParent
294              if (iZone == 0) q(ijb_u:ije_u,:,iq) = q(ijb_u:ije_u,:,iqParent)*tnat(iName) &
295                                                  *(q(ijb_u:ije_u,:,iqParent)/30.e-3)**(alpha_ideal(iName)-1)
296              if (iZone == 1) q(ijb_u:ije_u,:,iq) = q(ijb_u:ije_u,:,iqiso(iso_indnum(iq),iPhase))
297           enddo
298        else
299           q(ijb_u:ije_u,:,:)=0
300        endif ! of if (planet_type=="earth")
301
302        if (ok_iso_verif) call check_isotopes(q,ijb_u,ije_u,'iniacademic_loc')
303
304        ! add random perturbation to temperature
305        idum  = -1
306        zz = ran1(idum)
307        idum  = 0
308        do l=1,llm
309           do ij=iip2,ip1jm
310              teta_glo(ij,l)=teta_glo(ij,l)*(1.+tetanoise*ran1(idum))
311           enddo
312        enddo
313
314        ! maintain periodicity in longitude
315        do l=1,llm
316           do ij=1,ip1jmp1,iip1
317              teta_glo(ij+iim,l)=teta_glo(ij,l)
318           enddo
319        enddo
320
321        ! copy data from global array to local array:
322        teta(ijb_u:ije_u,:)=teta_glo(ijb_u:ije_u,:)
323        ucov(ijb_u:ije_u,:)=ucov_glo(ijb_u:ije_u,:)
324!        vcov(ijb_v:ije_v,:)=vcov_glo(ijb_v:ije_v,:)
325        masse(ijb_u:ije_u,:)=masse_glo(ijb_u:ije_u,:)
326        ps(ijb_u:ije_u)=ps_glo(ijb_u:ije_u)
327        phis(ijb_u:ije_u)=phis_glo(ijb_u:ije_u)
328
329        deallocate(teta_glo)
330        deallocate(ucov_glo)
331!        deallocate(vcov_glo)
332        deallocate(masse_glo)
333        deallocate(ps_glo)
334        deallocate(phis_glo)
335     ENDIF ! of IF (.NOT. read_start)
336  endif academic_case
337
338END SUBROUTINE iniacademic_loc
Note: See TracBrowser for help on using the repository browser.