source: LMDZ6/trunk/libf/dyn3dmem/dynredem_loc.F90 @ 5267

Last change on this file since 5267 was 5267, checked in by abarral, 2 days ago

Remove CPP_IOIPSL cpp keys uses
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
File size: 10.4 KB
Line 
1SUBROUTINE dynredem0_loc(fichnom,iday_end,phis)
2!
3!-------------------------------------------------------------------------------
4! Write the NetCDF restart file (initialization).
5!-------------------------------------------------------------------------------
6  USE IOIPSL
7  USE parallel_lmdz
8  USE mod_hallo
9  USE strings_mod, ONLY: maxlen
10  USE infotrac, ONLY: nqtot, tracers
11  USE netcdf, ONLY: NF90_CREATE, NF90_DEF_DIM, NF90_INQ_VARID, NF90_GLOBAL,    &
12                    NF90_CLOSE,  NF90_PUT_ATT, NF90_UNLIMITED, NF90_CLOBBER,   &
13                    NF90_64BIT_OFFSET
14  USE dynredem_mod, ONLY: cre_var, put_var, err, modname, fil
15  USE comvert_mod,  ONLY: ap, bp, presnivs, pa, preff, nivsig, nivsigs,&
16                          aps,bps,pseudoalt
17  USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad
18  USE logic_mod, ONLY: fxyhypb, ysinus
19  USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy, &
20                       taux,tauy
21  USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time
22  USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0
23
24  IMPLICIT NONE
25  include "dimensions.h"
26  include "paramet.h"
27  include "comgeom.h"
28  include "description.h"
29  include "iniprint.h"
30!===============================================================================
31! Arguments:
32  CHARACTER(LEN=*), INTENT(IN) :: fichnom          !--- FILE NAME
33  INTEGER,          INTENT(IN) :: iday_end         !---
34  REAL,             INTENT(IN) :: phis(ijb_u:ije_u)!--- GROUND GEOPOTENTIAL
35!===============================================================================
36! Local variables:
37  INTEGER :: iq
38  INTEGER, PARAMETER :: length=100
39  REAL    :: tab_cntrl(length)                     !--- RUN PARAMETERS TABLE
40  REAL    :: phis_glo(ip1jmp1)
41!   For NetCDF:
42  CHARACTER(LEN=maxlen) :: unites
43  INTEGER :: indexID
44  INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID
45  INTEGER :: sID, sigID, nID, timID
46  INTEGER :: yyears0, jjour0, mmois0
47  REAL    :: zjulian, hours
48!===============================================================================
49  modname='dynredem0'; fil=fichnom
50  CALL Gather_field_u(phis,phis_glo,1)
51  IF(mpi_rank/=0) RETURN
52
53  CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
54  CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
55
56
57  tab_cntrl(:)  = 0.
58  tab_cntrl(1)  = REAL(iim)
59  tab_cntrl(2)  = REAL(jjm)
60  tab_cntrl(3)  = REAL(llm)
61  tab_cntrl(4)  = REAL(day_ref)
62  tab_cntrl(5)  = REAL(annee_ref)
63  tab_cntrl(6)  = rad
64  tab_cntrl(7)  = omeg
65  tab_cntrl(8)  = g
66  tab_cntrl(9)  = cpp
67  tab_cntrl(10) = kappa
68  tab_cntrl(11) = daysec
69  tab_cntrl(12) = dtvr
70  tab_cntrl(13) = etot0
71  tab_cntrl(14) = ptot0
72  tab_cntrl(15) = ztot0
73  tab_cntrl(16) = stot0
74  tab_cntrl(17) = ang0
75  tab_cntrl(18) = pa
76  tab_cntrl(19) = preff
77
78!    .....    parameters for zoom    ......   
79  tab_cntrl(20) = clon
80  tab_cntrl(21) = clat
81  tab_cntrl(22) = grossismx
82  tab_cntrl(23) = grossismy
83!
84  IF ( fxyhypb )   THEN
85    tab_cntrl(24) = 1.
86    tab_cntrl(25) = dzoomx
87    tab_cntrl(26) = dzoomy
88    tab_cntrl(27) = 0.
89    tab_cntrl(28) = taux
90    tab_cntrl(29) = tauy
91  ELSE
92    tab_cntrl(24) = 0.
93    tab_cntrl(25) = dzoomx
94    tab_cntrl(26) = dzoomy
95    tab_cntrl(27) = 0.
96    tab_cntrl(28) = 0.
97    tab_cntrl(29) = 0.
98    IF( ysinus )  tab_cntrl(27) = 1.
99  END IF
100  tab_cntrl(30) = REAL(iday_end)
101  tab_cntrl(31) = REAL(itau_dyn + itaufin)
102! start_time: start_time of simulation (not necessarily 0.)
103  tab_cntrl(32) = start_time
104
105!--- File creation
106  CALL err(NF90_CREATE(fichnom,IOR(NF90_CLOBBER,NF90_64BIT_OFFSET),nid))
107
108!--- Some global attributes
109  CALL err(NF90_PUT_ATT(nid,NF90_GLOBAL,"title","Fichier demarrage dynamique"))
110
111!--- Dimensions
112  CALL err(NF90_DEF_DIM(nid,"index", length, indexID))
113  CALL err(NF90_DEF_DIM(nid,"rlonu", iip1,   rlonuID))
114  CALL err(NF90_DEF_DIM(nid,"rlatu", jjp1,   rlatuID))
115  CALL err(NF90_DEF_DIM(nid,"rlonv", iip1,   rlonvID))
116  CALL err(NF90_DEF_DIM(nid,"rlatv", jjm,    rlatvID))
117  CALL err(NF90_DEF_DIM(nid,"sigs",  llm,        sID))
118  CALL err(NF90_DEF_DIM(nid,"sig",   llmp1,    sigID))
119  CALL err(NF90_DEF_DIM(nid,"temps", NF90_UNLIMITED, timID))
120
121!--- Define and save invariant fields
122  CALL put_var(nid,"controle","Parametres de controle" ,[indexID],tab_cntrl)
123  CALL put_var(nid,"rlonu"   ,"Longitudes des points U",[rlonuID],rlonu)
124  CALL put_var(nid,"rlatu"   ,"Latitudes des points U" ,[rlatuID],rlatu)
125  CALL put_var(nid,"rlonv"   ,"Longitudes des points V",[rlonvID],rlonv)
126  CALL put_var(nid,"rlatv"   ,"Latitudes des points V" ,[rlatvID],rlatv)
127  CALL put_var(nid,"nivsigs" ,"Numero naturel des couches s"    ,[sID]  ,nivsigs)
128  CALL put_var(nid,"nivsig"  ,"Numero naturel des couches sigma",[sigID],nivsig)
129  CALL put_var(nid,"ap"      ,"Coefficient A pour hybride"      ,[sigID],ap)
130  CALL put_var(nid,"bp"      ,"Coefficient B pour hybride"      ,[sigID],bp)
131  CALL put_var(nid,"presnivs",""                                ,[sID]  ,presnivs)
132! covariant <-> contravariant <-> natural conversion coefficients
133  CALL put_var(nid,"cu","Coefficient de passage pour U",[rlonuID,rlatuID],cu)
134  CALL put_var(nid,"cv","Coefficient de passage pour V",[rlonvID,rlatvID],cv)
135  CALL put_var(nid,"aire","Aires de chaque maille"     ,[rlonvID,rlatuID],aire)
136  CALL put_var(nid,"phisinit","Geopotentiel au sol"    ,[rlonvID,rlatuID],phis_glo)
137
138!--- Define fields saved later
139  WRITE(unites,"('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')") &
140               yyears0,mmois0,jjour0
141  CALL cre_var(nid,"temps","Temps de simulation",[timID],unites)
142  CALL cre_var(nid,"ucov" ,"Vitesse U"  ,[rlonuID,rlatuID,sID,timID])
143  CALL cre_var(nid,"vcov" ,"Vitesse V"  ,[rlonvID,rlatvID,sID,timID])
144  CALL cre_var(nid,"teta" ,"Temperature",[rlonvID,rlatuID,sID,timID])
145  DO iq=1,nqtot
146    CALL cre_var(nid,tracers(iq)%name,tracers(iq)%longName,[rlonvID,rlatuID,sID,timID])
147  END DO
148  CALL cre_var(nid,"masse","Masse d air"    ,[rlonvID,rlatuID,sID,timID])
149  CALL cre_var(nid,"ps"   ,"Pression au sol",[rlonvID,rlatuID    ,timID])
150  CALL err(NF90_CLOSE (nid))
151
152  WRITE(lunout,*)TRIM(modname)//': iim,jjm,llm,iday_end',iim,jjm,llm,iday_end
153  WRITE(lunout,*)TRIM(modname)//': rad,omeg,g,cpp,kappa',rad,omeg,g,cpp,kappa
154
155END SUBROUTINE dynredem0_loc
156!
157!-------------------------------------------------------------------------------
158
159
160!-------------------------------------------------------------------------------
161!
162SUBROUTINE dynredem1_loc(fichnom,time,vcov,ucov,teta,q,masse,ps)
163!
164!-------------------------------------------------------------------------------
165! Purpose: Write the NetCDF restart file (append).
166!-------------------------------------------------------------------------------
167  USE parallel_lmdz
168  USE mod_hallo
169  USE strings_mod, ONLY: maxlen
170  USE infotrac, ONLY: nqtot, tracers, type_trac
171  USE control_mod
172  USE netcdf,   ONLY: NF90_OPEN,  NF90_NOWRITE, NF90_GET_VAR, NF90_INQ_VARID,  &
173                      NF90_CLOSE, NF90_WRITE,   NF90_PUT_VAR, NF90_NoErr
174  USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, &
175                          err, modname, fil, msg
176  USE temps_mod, ONLY: itau_dyn, itaufin
177 
178  IMPLICIT NONE
179  include "dimensions.h"
180  include "paramet.h"
181  include "description.h"
182  include "comgeom.h"
183  include "iniprint.h"
184!===============================================================================
185! Arguments:
186  CHARACTER(LEN=*), INTENT(IN) :: fichnom              !-- FILE NAME
187  REAL, INTENT(IN)    ::  time                         !-- TIME
188  REAL, INTENT(IN)    ::  vcov(ijb_v:ije_v,llm)        !-- V COVARIANT WIND
189  REAL, INTENT(IN)    ::  ucov(ijb_u:ije_u,llm)        !-- U COVARIANT WIND
190  REAL, INTENT(IN)    ::  teta(ijb_u:ije_u,llm)        !-- POTENTIAL TEMPERATURE
191  REAL, INTENT(INOUT) ::     q(ijb_u:ije_u,llm,nqtot)  !-- TRACERS
192  REAL, INTENT(IN)    :: masse(ijb_u:ije_u,llm)        !-- MASS PER CELL
193  REAL, INTENT(IN)    ::    ps(ijb_u:ije_u)            !-- GROUND PRESSURE
194!===============================================================================
195! Local variables:
196  INTEGER :: iq, nid, vID, ierr, nid_trac, vID_trac
197  INTEGER, SAVE :: nb=0
198  INTEGER, PARAMETER :: length=100
199  REAL               :: tab_cntrl(length) ! tableau des parametres du run
200  CHARACTER(LEN=maxlen) :: var, dum
201  LOGICAL            :: lread_inca
202!===============================================================================
203
204!$OMP MASTER
205  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
206  modname='dynredem1_loc'; fil=fichnom
207  CALL err(NF90_OPEN(fil,NF90_WRITE,nid),"open",fil)
208
209!--- Write/extend time coordinate
210  nb = nb + 1
211  var="temps"
212  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
213  CALL err(NF90_PUT_VAR(nid,vID,[time]),"put",var)
214  WRITE(lunout,*)TRIM(modname)//": Saving for ", nb, time
215
216!--- Rewrite control table (itaufin undefined in dynredem0)
217  var="controle"
218  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
219  CALL err(NF90_GET_VAR(nid,vID,tab_cntrl),"get",var)
220  tab_cntrl(31)=DBLE(itau_dyn + itaufin)
221  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
222  CALL err(NF90_PUT_VAR(nid,vID,tab_cntrl),"put",var)
223  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
224!$OMP END MASTER
225
226!--- Save fields
227  CALL dynredem_write_u(nid,"ucov" ,ucov ,llm)
228  CALL dynredem_write_v(nid,"vcov" ,vcov ,llm)
229  CALL dynredem_write_u(nid,"teta" ,teta ,llm)
230  CALL dynredem_write_u(nid,"masse",masse,llm)
231  CALL dynredem_write_u(nid,"ps"   ,ps   ,1)
232
233!--- Tracers in file "start_trac.nc" (added by Anne)
234  lread_inca=.FALSE.
235!$OMP MASTER
236  fil="start_trac.nc"
237  IF(ANY(type_trac == ['inca','inco'])) INQUIRE(FILE=fil,EXIST=lread_inca)
238  IF(lread_inca) CALL err(NF90_OPEN(fil,NF90_NOWRITE,nid_trac),"open")
239!$OMP END MASTER
240!$OMP BARRIER
241
242!--- Save tracers
243  DO iq=1,nqtot; var=TRIM(tracers(iq)%name); ierr=-1
244    IF(lread_inca) THEN                  !--- Possibly read from "start_trac.nc"
245!$OMP MASTER     
246      fil="start_trac.nc"
247      ierr=NF90_INQ_VARID(nid_trac,var,vID_trac)
248      dum='inq'; IF(ierr==NF90_NoErr) dum='fnd'
249      WRITE(lunout,*)msg(dum,var)
250!$OMP END MASTER
251!$OMP BARRIER
252      IF(ierr==NF90_NoErr) CALL dynredem_read_u(nid_trac,var,q(:,:,iq),llm)
253    END IF
254    fil=fichnom
255    CALL dynredem_write_u(nid,var,q(:,:,iq),llm)
256  END DO
257
258!$OMP MASTER
259  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
260  CALL err(NF90_CLOSE(nid),"close")
261  fil="start_trac.nc"
262  IF(lread_inca) CALL err(NF90_CLOSE(nid_trac),"close")
263  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
264!$OMP END MASTER
265
266END SUBROUTINE dynredem1_loc
267
Note: See TracBrowser for help on using the repository browser.