Context Navigation

← Previous Revision
Next Revision →
Blame
Revision Log

conf_gcm.F90

Last change on this file was 4608, checked in by acozic, 11 months ago

Add of an output file containing mass flow when offline parameter is to "yes"
this file will be on horizontal grid with vertical level klev
When LMDZ is coupled to Inca, we don't call anymore the routine phystoken if offline=y

Anne Cozic

Property copyright set to
Name of program: LMDZ
Creation date: 1984
Version: LMDZ5
License: CeCILL version 2
Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
See the license file in the root directory

File size: 34.5 KB

Line
1
2	! $Id$
3
4	SUBROUTINE conf_gcm( tapedef, etatinit )
5
6	USE control_mod
7	#ifdef CPP_IOIPSL
8	USE IOIPSL
9	#else
10	! if not using IOIPSL, we still need to use (a local version of) getin
11	USE ioipsl_getincom
12	#endif
13	USE misc_mod
14	USE mod_filtre_fft, ONLY: use_filtre_fft
15	USE mod_filtre_fft_loc, ONLY: use_filtre_fft_loc=>use_filtre_fft
16	USE mod_hallo, ONLY: use_mpi_alloc
17	USE infotrac, ONLY: type_trac
18	USE assert_m, ONLY: assert
19	USE comconst_mod, ONLY: dissip_deltaz, dissip_factz, dissip_zref, &
20	iflag_top_bound, mode_top_bound, tau_top_bound, &
21	ngroup, maxlatfilter
22	USE logic_mod, ONLY: fxyhypb, iflag_phys, ok_etat0, ok_gradsfile, &
23	ok_guide, ok_limit, ok_strato, purmats, read_start, &
24	ysinus, read_orop
25	USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy, &
26	alphax,alphay,taux,tauy
27	USE temps_mod, ONLY: calend, year_len, offline_time
28
29	IMPLICIT NONE
30	!-----------------------------------------------------------------------
31	! Auteurs : L. Fairhead , P. Le Van .
32
33	! Arguments :
34
35	! tapedef :
36	! etatinit : = TRUE , on ne compare pas les valeurs des para-
37	! -metres du zoom avec celles lues sur le fichier start .
38
39	LOGICAL,INTENT(IN) :: etatinit
40	INTEGER,INTENT(IN) :: tapedef
41
42	! Declarations :
43	! --------------
44	include "dimensions.h"
45	include "paramet.h"
46	include "comdissnew.h"
47	include "iniprint.h"
48
49	! local:
50	! ------
51
52	CHARACTER ch172,ch272,ch372,ch412
53	REAL clonn,clatt,grossismxx,grossismyy
54	REAL dzoomxx,dzoomyy, tauxx,tauyy
55	LOGICAL fxyhypbb, ysinuss
56	INTEGER i
57	CHARACTER(len=*), PARAMETER :: modname="conf_gcm"
58	CHARACTER(len=80) :: abort_message
59	#ifdef CPP_OMP
60	INTEGER, EXTERNAL :: OMP_GET_NUM_THREADS
61	#endif
62
63	! -------------------------------------------------------------------
64
65	! ......... Version du 29/04/97 ..........
66
67	! Nouveaux parametres nitergdiv,nitergrot,niterh,tetagdiv,tetagrot,
68	! tetatemp ajoutes pour la dissipation .
69
70	! Autre parametre ajoute en fin de liste de tapedef : fxyhypb
71
72	! Si fxyhypb = .TRUE. , choix de la fonction a derivee tangente hyperb.
73	! Sinon , choix de fxynew , a derivee sinusoidale ..
74
75	! ...... etatinit = . TRUE. si defrun est appele dans ETAT0_LMD ou
76	! LIMIT_LMD pour l'initialisation de start.dat (dic) et
77	! de limit.dat ( dic) ...........
78	! Sinon etatinit = . FALSE .
79
80	! Donc etatinit = .F. si on veut comparer les valeurs de grossismx ,
81	! grossismy,clon,clat, fxyhypb lues sur le fichier start avec
82	! celles passees par run.def , au debut du gcm, apres l'appel a
83	! lectba .
84	! Ces parmetres definissant entre autres la grille et doivent etre
85	! pareils et coherents , sinon il y aura divergence du gcm .
86
87	!-----------------------------------------------------------------------
88	! initialisations:
89	! ----------------
90
91	!Config Key = lunout
92	!Config Desc = unite de fichier pour les impressions
93	!Config Def = 6
94	!Config Help = unite de fichier pour les impressions
95	!Config (defaut sortie standard = 6)
96	lunout=6
97	CALL getin('lunout', lunout)
98	IF (lunout /= 5 .and. lunout /= 6) THEN
99	OPEN(UNIT=lunout,FILE='lmdz.out_0000',ACTION='write', &
100	STATUS='unknown',FORM='formatted')
101	ENDIF
102
103	adjust=.false.
104	CALL getin('adjust',adjust)
105
106	#ifdef CPP_OMP
107	! adjust=y not implemented in case of OpenMP threads...
108	!$OMP PARALLEL
109	IF ((OMP_GET_NUM_THREADS()>1).and.adjust) then
110	write(lunout,*)'conf_gcm: Error, adjust should be set to n' &
111	,' when running with OpenMP threads'
112	abort_message = 'Wrong value for adjust'
113	CALL abort_gcm(modname,abort_message,1)
114	ENDIF
115	!$OMP END PARALLEL
116	#endif
117
118	itaumax=0
119	CALL getin('itaumax',itaumax);
120	IF (itaumax<=0) itaumax=HUGE(itaumax)
121
122	!Config Key = prt_level
123	!Config Desc = niveau d'impressions de débogage
124	!Config Def = 0
125	!Config Help = Niveau d'impression pour le débogage
126	!Config (0 = minimum d'impression)
127	prt_level = 0
128	CALL getin('prt_level',prt_level)
129
130	!-----------------------------------------------------------------------
131	! Parametres de controle du run:
132	!-----------------------------------------------------------------------
133	!Config Key = planet_type
134	!Config Desc = planet type ("earth", "mars", "venus", ...)
135	!Config Def = earth
136	!Config Help = this flag sets the type of atymosphere that is considered
137	planet_type="earth"
138	CALL getin('planet_type',planet_type)
139
140	!Config Key = calend
141	!Config Desc = type de calendrier utilise
142	!Config Def = earth_360d
143	!Config Help = valeur possible: earth_360d, earth_365d, earth_366d
144	!Config
145	calend = 'earth_360d'
146	! initialize year_len for aquaplanets and 1D
147	CALL getin('calend', calend)
148	IF (calend == 'earth_360d') THEN
149	year_len=360
150	ELSE IF (calend == 'earth_365d') THEN
151	year_len=365
152	ELSE IF (calend == 'earth_366d') THEN
153	year_len=366
154	ELSE
155	year_len=1
156	ENDIF
157
158	!Config Key = dayref
159	!Config Desc = Jour de l'etat initial
160	!Config Def = 1
161	!Config Help = Jour de l'etat initial ( = 350 si 20 Decembre ,
162	!Config par expl. ,comme ici ) ... A completer
163	dayref=1
164	CALL getin('dayref', dayref)
165
166	!Config Key = anneeref
167	!Config Desc = Annee de l'etat initial
168	!Config Def = 1998
169	!Config Help = Annee de l'etat initial
170	!Config ( avec 4 chiffres ) ... A completer
171	anneeref = 1998
172	CALL getin('anneeref',anneeref)
173
174	!Config Key = raz_date
175	!Config Desc = Remise a zero de la date initiale
176	!Config Def = 0 (pas de remise a zero)
177	!Config Help = Remise a zero de la date initiale
178	!Config 0 pas de remise a zero, on garde la date du fichier restart
179	!Config 1 prise en compte de la date de gcm.def avec remise a zero
180	!Config des compteurs de pas de temps
181	raz_date = 0
182	CALL getin('raz_date', raz_date)
183
184	!Config Key = resetvarc
185	!Config Desc = Reinit des variables de controle
186	!Config Def = n
187	!Config Help = Reinit des variables de controle
188	resetvarc = .false.
189	CALL getin('resetvarc',resetvarc)
190
191	!Config Key = nday
192	!Config Desc = Nombre de jours d'integration
193	!Config Def = 10
194	!Config Help = Nombre de jours d'integration
195	!Config ... On pourait aussi permettre des mois ou des annees !
196	nday = 10
197	CALL getin('nday',nday)
198
199	!Config Key = starttime
200	!Config Desc = Heure de depart de la simulation
201	!Config Def = 0
202	!Config Help = Heure de depart de la simulation
203	!Config en jour
204	starttime = 0
205	CALL getin('starttime',starttime)
206
207	!Config Key = day_step
208	!Config Desc = nombre de pas par jour
209	!Config Def = 240
210	!Config Help = nombre de pas par jour (multiple de iperiod) (
211	!Config ici pour dt = 1 min )
212	day_step = 240
213	CALL getin('day_step',day_step)
214
215	!Config Key = nsplit_phys
216	nsplit_phys = 1
217	CALL getin('nsplit_phys',nsplit_phys)
218
219	!Config Key = iperiod
220	!Config Desc = periode pour le pas Matsuno
221	!Config Def = 5
222	!Config Help = periode pour le pas Matsuno (en pas de temps)
223	iperiod = 5
224	CALL getin('iperiod',iperiod)
225
226	!Config Key = iapp_tracvl
227	!Config Desc = frequence du groupement des flux
228	!Config Def = iperiod
229	!Config Help = frequence du groupement des flux (en pas de temps)
230	iapp_tracvl = iperiod
231	CALL getin('iapp_tracvl',iapp_tracvl)
232
233	!Config Key = iconser
234	!Config Desc = periode de sortie des variables de controle
235	!Config Def = 240
236	!Config Help = periode de sortie des variables de controle
237	!Config (En pas de temps)
238	iconser = 240
239	CALL getin('iconser', iconser)
240
241	!Config Key = iecri
242	!Config Desc = periode d'ecriture du fichier histoire
243	!Config Def = 1
244	!Config Help = periode d'ecriture du fichier histoire (en jour)
245	iecri = 1
246	CALL getin('iecri',iecri)
247
248	!Config Key = periodav
249	!Config Desc = periode de stockage fichier histmoy
250	!Config Def = 1
251	!Config Help = periode de stockage fichier histmoy (en jour)
252	periodav = 1.
253	CALL getin('periodav',periodav)
254
255	!Config Key = output_grads_dyn
256	!Config Desc = output dynamics diagnostics in 'dyn.dat' file
257	!Config Def = n
258	!Config Help = output dynamics diagnostics in Grads-readable 'dyn.dat' file
259	output_grads_dyn=.false.
260	CALL getin('output_grads_dyn',output_grads_dyn)
261
262	!Config Key = dissip_period
263	!Config Desc = periode de la dissipation
264	!Config Def = 0
265	!Config Help = periode de la dissipation
266	!Config dissip_period=0 => la valeur sera calcule dans inidissip
267	!Config dissip_period>0 => on prend cette valeur
268	dissip_period = 0
269	CALL getin('dissip_period',dissip_period)
270
271	!cc .... P. Le Van , modif le 29/04/97 .pour la dissipation ...
272	!cc
273
274	!Config Key = lstardis
275	!Config Desc = choix de l'operateur de dissipation
276	!Config Def = y
277	!Config Help = choix de l'operateur de dissipation
278	!Config 'y' si on veut star et 'n' si on veut non-start !
279	!Config Moi y en a pas comprendre !
280	lstardis = .TRUE.
281	CALL getin('lstardis',lstardis)
282
283	!Config Key = nitergdiv
284	!Config Desc = Nombre d'iteration de gradiv
285	!Config Def = 1
286	!Config Help = nombre d'iterations de l'operateur de dissipation
287	!Config gradiv
288	nitergdiv = 1
289	CALL getin('nitergdiv',nitergdiv)
290
291	!Config Key = nitergrot
292	!Config Desc = nombre d'iterations de nxgradrot
293	!Config Def = 2
294	!Config Help = nombre d'iterations de l'operateur de dissipation
295	!Config nxgradrot
296	nitergrot = 2
297	CALL getin('nitergrot',nitergrot)
298
299	!Config Key = niterh
300	!Config Desc = nombre d'iterations de divgrad
301	!Config Def = 2
302	!Config Help = nombre d'iterations de l'operateur de dissipation
303	!Config divgrad
304	niterh = 2
305	CALL getin('niterh',niterh)
306
307	!Config Key = tetagdiv
308	!Config Desc = temps de dissipation pour div
309	!Config Def = 7200
310	!Config Help = temps de dissipation des plus petites longeur
311	!Config d'ondes pour u,v (gradiv)
312	tetagdiv = 7200.
313	CALL getin('tetagdiv',tetagdiv)
314
315	!Config Key = tetagrot
316	!Config Desc = temps de dissipation pour grad
317	!Config Def = 7200
318	!Config Help = temps de dissipation des plus petites longeur
319	!Config d'ondes pour u,v (nxgradrot)
320	tetagrot = 7200.
321	CALL getin('tetagrot',tetagrot)
322
323	!Config Key = tetatemp
324	!Config Desc = temps de dissipation pour h
325	!Config Def = 7200
326	!Config Help = temps de dissipation des plus petites longeur
327	!Config d'ondes pour h (divgrad)
328	tetatemp = 7200.
329	CALL getin('tetatemp',tetatemp )
330
331	! Parametres controlant la variation sur la verticale des constantes de
332	! dissipation.
333	! Pour le moment actifs uniquement dans la version a 39 niveaux
334	! avec ok_strato=y
335
336	dissip_factz=4.
337	dissip_deltaz=10.
338	dissip_zref=30.
339	CALL getin('dissip_factz',dissip_factz )
340	CALL getin('dissip_deltaz',dissip_deltaz )
341	CALL getin('dissip_zref',dissip_zref )
342
343
344	!maxlatfilter
345	maxlatfilter = -1.0
346	CALL getin('maxlatfilter',maxlatfilter)
347	if (maxlatfilter > 90) &
348	call abort_gcm("conf_gcm", 'maxlatfilter should be <=90', 1)
349
350
351	! ngroup
352	ngroup=3
353	CALL getin('ngroup',ngroup)
354	IF (mod(iim, 2**ngroup) /= 0) &
355	call abort_gcm("conf_gcm", 'iim must be multiple of 2**ngroup', 1)
356	IF (2**ngroup > jjm + 1) &
357	call abort_gcm("conf_gcm", '2**ngroup must be <= jjm + 1', 1)
358
359	! mode_top_bound : fields towards which sponge relaxation will be done:
360	! top_bound sponge: only active if ok_strato=.true. and iflag_top_bound!=0
361	! iflag_top_bound=0 for no sponge
362	! iflag_top_bound=1 for sponge over 4 topmost layers
363	! iflag_top_bound=2 for sponge from top to ~1% of top layer pressure
364	iflag_top_bound=1
365	CALL getin('iflag_top_bound',iflag_top_bound)
366	IF (iflag_top_bound < 0 .or. iflag_top_bound > 2) &
367	call abort_gcm("conf_gcm", 'iflag_top_bound must be 0, 1 or 2', 1)
368
369	! mode_top_bound : fields towards which sponge relaxation will be done:
370	! mode_top_bound=0: no relaxation
371	! mode_top_bound=1: u and v relax towards 0
372	! mode_top_bound=2: u and v relax towards their zonal mean
373	! mode_top_bound=3: u,v and pot. temp. relax towards their zonal mean
374	mode_top_bound=3
375	CALL getin('mode_top_bound',mode_top_bound)
376
377	! top_bound sponge : inverse of charactericstic relaxation time scale for sponge
378	tau_top_bound=1.e-5
379	CALL getin('tau_top_bound',tau_top_bound)
380
381	!Config Key = coefdis
382	!Config Desc = coefficient pour gamdissip
383	!Config Def = 0
384	!Config Help = coefficient pour gamdissip
385	coefdis = 0.
386	CALL getin('coefdis',coefdis)
387
388	!Config Key = purmats
389	!Config Desc = Schema d'integration
390	!Config Def = n
391	!Config Help = Choix du schema d'integration temporel.
392	!Config y = pure Matsuno sinon c'est du Matsuno-leapfrog
393	purmats = .FALSE.
394	CALL getin('purmats',purmats)
395
396	!Config Key = ok_guide
397	!Config Desc = Guidage
398	!Config Def = n
399	!Config Help = Guidage
400	ok_guide = .FALSE.
401	CALL getin('ok_guide',ok_guide)
402
403	IF (ok_guide .and. adjust) call abort_gcm("conf_gcm", &
404	"adjust does not work with ok_guide", 1)
405
406	!Config Key = read_start
407	!Config Desc = Initialize model using a 'start.nc' file
408	!Config Def = y
409	!Config Help = y: intialize dynamical fields using a 'start.nc' file
410	! n: fields are initialized by 'iniacademic' routine
411	read_start= .true.
412	CALL getin('read_start',read_start)
413
414	!Config Key = iflag_phys
415	!Config Desc = Avec ls physique
416	!Config Def = 1
417	!Config Help = Permet de faire tourner le modele sans
418	!Config physique.
419	iflag_phys = 1
420	CALL getin('iflag_phys',iflag_phys)
421
422	!Config Key = iphysiq
423	!Config Desc = Periode de la physique
424	!Config Def = 5
425	!Config Help = Periode de la physique en pas de temps de la dynamique.
426	iphysiq = 5
427	CALL getin('iphysiq', iphysiq)
428
429	!Config Key = ip_ebil_dyn
430	!Config Desc = PRINT level for energy conserv. diag.
431	!Config Def = 0
432	!Config Help = PRINT level for energy conservation diag. ;
433	! les options suivantes existent :
434	!Config 0 pas de print
435	!Config 1 pas de print
436	!Config 2 print,
437	ip_ebil_dyn = 0
438	CALL getin('ip_ebil_dyn',ip_ebil_dyn)
439
440	!cc .... P. Le Van , ajout le 7/03/95 .pour le zoom ...
441	! ......... ( modif le 17/04/96 ) .........
442
443	test_etatinit: IF (.not. etatinit) then
444	!Config Key = clon
445	!Config Desc = centre du zoom, longitude
446	!Config Def = 0
447	!Config Help = longitude en degres du centre
448	!Config du zoom
449	clonn = 0.
450	CALL getin('clon',clonn)
451
452	!Config Key = clat
453	!Config Desc = centre du zoom, latitude
454	!Config Def = 0
455	!Config Help = latitude en degres du centre du zoom
456	!Config
457	clatt = 0.
458	CALL getin('clat',clatt)
459
460	IF( ABS(clat - clatt).GE. 0.001 ) THEN
461	write(lunout,*)'conf_gcm: La valeur de clat passee par run.def', &
462	' est differente de celle lue sur le fichier start '
463	CALL abort_gcm("conf_gcm","stopped",1)
464	ENDIF
465
466	!Config Key = grossismx
467	!Config Desc = zoom en longitude
468	!Config Def = 1.0
469	!Config Help = facteur de grossissement du zoom,
470	!Config selon la longitude
471	grossismxx = 1.0
472	CALL getin('grossismx',grossismxx)
473
474	IF( ABS(grossismx - grossismxx).GE. 0.001 ) THEN
475	write(lunout,*)'conf_gcm: La valeur de grossismx passee par ', &
476	'run.def est differente de celle lue sur le fichier start '
477	CALL abort_gcm("conf_gcm","stopped",1)
478	ENDIF
479
480	!Config Key = grossismy
481	!Config Desc = zoom en latitude
482	!Config Def = 1.0
483	!Config Help = facteur de grossissement du zoom,
484	!Config selon la latitude
485	grossismyy = 1.0
486	CALL getin('grossismy',grossismyy)
487
488	IF( ABS(grossismy - grossismyy).GE. 0.001 ) THEN
489	write(lunout,*)'conf_gcm: La valeur de grossismy passee par ', &
490	'run.def est differente de celle lue sur le fichier start '
491	CALL abort_gcm("conf_gcm","stopped",1)
492	ENDIF
493
494	IF( grossismx.LT.1. ) THEN
495	write(lunout,*) &
496	'conf_gcm: * ATTENTION !! grossismx < 1 . * '
497	CALL abort_gcm("conf_gcm","stopped",1)
498	ELSE
499	alphax = 1. - 1./ grossismx
500	ENDIF
501
502	IF( grossismy.LT.1. ) THEN
503	write(lunout,*) &
504	'conf_gcm: * ATTENTION !! grossismy < 1 . * '
505	CALL abort_gcm("conf_gcm","stopped",1)
506	ELSE
507	alphay = 1. - 1./ grossismy
508	ENDIF
509
510	write(lunout,*)'conf_gcm: alphax alphay',alphax,alphay
511
512	! alphax et alphay sont les anciennes formulat. des grossissements
513
514	!Config Key = fxyhypb
515	!Config Desc = Fonction hyperbolique
516	!Config Def = y
517	!Config Help = Fonction f(y) hyperbolique si = .true.
518	!Config sinon sinusoidale
519	fxyhypbb = .TRUE.
520	CALL getin('fxyhypb',fxyhypbb)
521
522	IF( .NOT.fxyhypb ) THEN
523	IF( fxyhypbb ) THEN
524	write(lunout,)' ***** PBS DANS CONF_GCM ****** '
525	write(lunout,)' ** fxyhypb lu sur le fichier start est ', &
526	'F alors qu il est T sur run.def ***'
527	CALL abort_gcm("conf_gcm","stopped",1)
528	ENDIF
529	ELSE
530	IF( .NOT.fxyhypbb ) THEN
531	write(lunout,)' ***** PBS DANS CONF_GCM ****** '
532	write(lunout,)' ** fxyhypb lu sur le fichier start est ', &
533	'T alors qu il est F sur run.def **** '
534	CALL abort_gcm("conf_gcm","stopped",1)
535	ENDIF
536	ENDIF
537
538	!Config Key = dzoomx
539	!Config Desc = extension en longitude
540	!Config Def = 0
541	!Config Help = extension en longitude de la zone du zoom
542	!Config ( fraction de la zone totale)
543	dzoomxx = 0.0
544	CALL getin('dzoomx',dzoomxx)
545
546	IF( fxyhypb ) THEN
547	IF( ABS(dzoomx - dzoomxx).GE. 0.001 ) THEN
548	write(lunout,*)'conf_gcm: La valeur de dzoomx passee par ', &
549	'run.def est differente de celle lue sur le fichier start '
550	CALL abort_gcm("conf_gcm","stopped",1)
551	ENDIF
552	ENDIF
553
554	!Config Key = dzoomy
555	!Config Desc = extension en latitude
556	!Config Def = 0
557	!Config Help = extension en latitude de la zone du zoom
558	!Config ( fraction de la zone totale)
559	dzoomyy = 0.0
560	CALL getin('dzoomy',dzoomyy)
561
562	IF( fxyhypb ) THEN
563	IF( ABS(dzoomy - dzoomyy).GE. 0.001 ) THEN
564	write(lunout,*)'conf_gcm: La valeur de dzoomy passee par ', &
565	'run.def est differente de celle lue sur le fichier start '
566	CALL abort_gcm("conf_gcm","stopped",1)
567	ENDIF
568	ENDIF
569
570	!Config Key = taux
571	!Config Desc = raideur du zoom en X
572	!Config Def = 3
573	!Config Help = raideur du zoom en X
574	tauxx = 3.0
575	CALL getin('taux',tauxx)
576
577	IF( fxyhypb ) THEN
578	IF( ABS(taux - tauxx).GE. 0.001 ) THEN
579	write(lunout,*)'conf_gcm: La valeur de taux passee par ', &
580	'run.def est differente de celle lue sur le fichier start '
581	CALL abort_gcm("conf_gcm","stopped",1)
582	ENDIF
583	ENDIF
584
585	!Config Key = tauyy
586	!Config Desc = raideur du zoom en Y
587	!Config Def = 3
588	!Config Help = raideur du zoom en Y
589	tauyy = 3.0
590	CALL getin('tauy',tauyy)
591
592	IF( fxyhypb ) THEN
593	IF( ABS(tauy - tauyy).GE. 0.001 ) THEN
594	write(lunout,*)'conf_gcm: La valeur de tauy passee par ', &
595	'run.def est differente de celle lue sur le fichier start '
596	CALL abort_gcm("conf_gcm","stopped",1)
597	ENDIF
598	ENDIF
599
600	!c
601	IF( .NOT.fxyhypb ) THEN
602
603	!Config Key = ysinus
604	!Config IF = !fxyhypb
605	!Config Desc = Fonction en Sinus
606	!Config Def = y
607	!Config Help = Fonction f(y) avec y = Sin(latit.) si = .true.
608	!Config sinon y = latit.
609	ysinuss = .TRUE.
610	CALL getin('ysinus',ysinuss)
611
612	IF( .NOT.ysinus ) THEN
613	IF( ysinuss ) THEN
614	write(lunout,)' ***** PBS DANS CONF_GCM ****** '
615	write(lunout,)' ** ysinus lu sur le fichier start est F', &
616	' alors qu il est T sur run.def ***'
617	CALL abort_gcm("conf_gcm","stopped",1)
618	ENDIF
619	ELSE
620	IF( .NOT.ysinuss ) THEN
621	write(lunout,)' ***** PBS DANS CONF_GCM ****** '
622	write(lunout,)' ** ysinus lu sur le fichier start est T', &
623	' alors qu il est F sur run.def **** '
624	CALL abort_gcm("conf_gcm","stopped",1)
625	ENDIF
626	ENDIF
627	ENDIF ! of IF( .NOT.fxyhypb )
628
629	!Config Key = offline
630	!Config Desc = ecriture des flux de masse
631	!Config Def = n
632	!Config Help = Permet de sortir les flux de masse sur la grille plev
633	offline = .FALSE.
634	CALL getin('offline',offline)
635
636	!Config Key = offline_time
637	!Config Desc = Choix des frequences de stockage pour le offline
638	!Config Def = 8
639	!Config Help = offline_time=12 ! stockage toutes les 2h=1jour/12
640	!Config Help = offline_time=8 ! stockage toutes les 3h=1jour/8
641	offline_time = 8
642	CALL getin('offline_time',offline_time)
643
644	IF (offline .AND. adjust) THEN
645	WRITE(lunout,*) &
646	'WARNING : option offline does not work with adjust=y :'
647	WRITE(lunout,*) 'the files defstoke.nc, fluxstoke.nc ', &
648	'and fluxstokev.nc will not be created'
649	WRITE(lunout,*) &
650	'only the file phystoke.nc will still be created '
651	ENDIF
652
653	!Config Key = type_trac
654	!Config Desc = Choix de couplage avec model de chimie INCA ou REPROBUS
655	!Config Def = lmdz
656	!Config Help =
657	!Config 'lmdz' = pas de couplage, pur LMDZ
658	!Config 'inca' = model de chime INCA
659	!Config 'repr' = model de chime REPROBUS
660	type_trac = 'lmdz'
661	CALL getin('type_trac',type_trac)
662
663	!Config Key = ok_dynzon
664	!Config Desc = calcul et sortie des transports
665	!Config Def = n
666	!Config Help = Permet de mettre en route le calcul des transports
667	!Config
668	ok_dynzon = .FALSE.
669	CALL getin('ok_dynzon',ok_dynzon)
670
671	!Config Key = ok_dyn_ins
672	!Config Desc = sorties instantanees dans la dynamique
673	!Config Def = n
674	!Config Help =
675	!Config
676	ok_dyn_ins = .FALSE.
677	CALL getin('ok_dyn_ins',ok_dyn_ins)
678
679	!Config Key = ok_dyn_ave
680	!Config Desc = sorties moyennes dans la dynamique
681	!Config Def = n
682	!Config Help =
683	!Config
684	ok_dyn_ave = .FALSE.
685	CALL getin('ok_dyn_ave',ok_dyn_ave)
686
687	!Config Key = ok_dyn_xios
688	!Config Desc = sorties moyennes dans la dynamique
689	!Config Def = n
690	!Config Help =
691	!Config
692	ok_dyn_xios = .FALSE.
693	CALL getin('ok_dyn_xios',ok_dyn_xios)
694
695	write(lunout,*)' #########################################'
696	write(lunout,*)' Configuration des parametres du gcm: '
697	write(lunout,*)' planet_type = ', planet_type
698	write(lunout,*)' calend = ', calend
699	write(lunout,*)' dayref = ', dayref
700	write(lunout,*)' anneeref = ', anneeref
701	write(lunout,*)' nday = ', nday
702	write(lunout,*)' day_step = ', day_step
703	write(lunout,*)' iperiod = ', iperiod
704	write(lunout,*)' nsplit_phys = ', nsplit_phys
705	write(lunout,*)' iconser = ', iconser
706	write(lunout,*)' iecri = ', iecri
707	write(lunout,*)' periodav = ', periodav
708	write(lunout,*)' output_grads_dyn = ', output_grads_dyn
709	write(lunout,*)' dissip_period = ', dissip_period
710	write(lunout,*)' lstardis = ', lstardis
711	write(lunout,*)' nitergdiv = ', nitergdiv
712	write(lunout,*)' nitergrot = ', nitergrot
713	write(lunout,*)' niterh = ', niterh
714	write(lunout,*)' tetagdiv = ', tetagdiv
715	write(lunout,*)' tetagrot = ', tetagrot
716	write(lunout,*)' tetatemp = ', tetatemp
717	write(lunout,*)' coefdis = ', coefdis
718	write(lunout,*)' purmats = ', purmats
719	write(lunout,*)' read_start = ', read_start
720	write(lunout,*)' iflag_phys = ', iflag_phys
721	write(lunout,*)' iphysiq = ', iphysiq
722	write(lunout,*)' clonn = ', clonn
723	write(lunout,*)' clatt = ', clatt
724	write(lunout,*)' grossismx = ', grossismx
725	write(lunout,*)' grossismy = ', grossismy
726	write(lunout,*)' fxyhypbb = ', fxyhypbb
727	write(lunout,*)' dzoomxx = ', dzoomxx
728	write(lunout,*)' dzoomy = ', dzoomyy
729	write(lunout,*)' tauxx = ', tauxx
730	write(lunout,*)' tauyy = ', tauyy
731	write(lunout,*)' offline = ', offline
732	write(lunout,*)' offline_time = ', offline_time
733	write(lunout,*)' type_trac = ', type_trac
734	write(lunout,*)' ok_dynzon = ', ok_dynzon
735	write(lunout,*)' ok_dyn_ins = ', ok_dyn_ins
736	write(lunout,*)' ok_dyn_ave = ', ok_dyn_ave
737	write(lunout,*)' ok_dyn_xios = ', ok_dyn_xios
738	else
739	!Config Key = clon
740	!Config Desc = centre du zoom, longitude
741	!Config Def = 0
742	!Config Help = longitude en degres du centre
743	!Config du zoom
744	clon = 0.
745	CALL getin('clon',clon)
746
747	!Config Key = clat
748	!Config Desc = centre du zoom, latitude
749	!Config Def = 0
750	!Config Help = latitude en degres du centre du zoom
751	!Config
752	clat = 0.
753	CALL getin('clat',clat)
754
755	!Config Key = grossismx
756	!Config Desc = zoom en longitude
757	!Config Def = 1.0
758	!Config Help = facteur de grossissement du zoom,
759	!Config selon la longitude
760	grossismx = 1.0
761	CALL getin('grossismx',grossismx)
762
763	!Config Key = grossismy
764	!Config Desc = zoom en latitude
765	!Config Def = 1.0
766	!Config Help = facteur de grossissement du zoom,
767	!Config selon la latitude
768	grossismy = 1.0
769	CALL getin('grossismy',grossismy)
770
771	IF( grossismx.LT.1. ) THEN
772	write(lunout,) 'conf_gcm: ATTENTION !! grossismx < 1 . * '
773	CALL abort_gcm("conf_gcm","stopped",1)
774	ELSE
775	alphax = 1. - 1./ grossismx
776	ENDIF
777
778	IF( grossismy.LT.1. ) THEN
779	write(lunout,) 'conf_gcm: ATTENTION !! grossismy < 1 . * '
780	CALL abort_gcm("conf_gcm","stopped",1)
781	ELSE
782	alphay = 1. - 1./ grossismy
783	ENDIF
784
785	write(lunout,*) 'conf_gcm: alphax alphay ',alphax,alphay
786
787	! alphax et alphay sont les anciennes formulat. des grossissements
788
789	!Config Key = fxyhypb
790	!Config Desc = Fonction hyperbolique
791	!Config Def = y
792	!Config Help = Fonction f(y) hyperbolique si = .true.
793	!Config sinon sinusoidale
794	fxyhypb = .TRUE.
795	CALL getin('fxyhypb',fxyhypb)
796
797	!Config Key = dzoomx
798	!Config Desc = extension en longitude
799	!Config Def = 0
800	!Config Help = extension en longitude de la zone du zoom
801	!Config ( fraction de la zone totale)
802	dzoomx = 0.2
803	CALL getin('dzoomx',dzoomx)
804	call assert(dzoomx < 1, "conf_gcm: dzoomx must be < 1")
805
806	!Config Key = dzoomy
807	!Config Desc = extension en latitude
808	!Config Def = 0
809	!Config Help = extension en latitude de la zone du zoom
810	!Config ( fraction de la zone totale)
811	dzoomy = 0.2
812	CALL getin('dzoomy',dzoomy)
813	call assert(dzoomy < 1, "conf_gcm: dzoomy must be < 1")
814
815	!Config Key = taux
816	!Config Desc = raideur du zoom en X
817	!Config Def = 3
818	!Config Help = raideur du zoom en X
819	taux = 3.0
820	CALL getin('taux',taux)
821
822	!Config Key = tauy
823	!Config Desc = raideur du zoom en Y
824	!Config Def = 3
825	!Config Help = raideur du zoom en Y
826	tauy = 3.0
827	CALL getin('tauy',tauy)
828
829	!Config Key = ysinus
830	!Config IF = !fxyhypb
831	!Config Desc = Fonction en Sinus
832	!Config Def = y
833	!Config Help = Fonction f(y) avec y = Sin(latit.) si = .true.
834	!Config sinon y = latit.
835	ysinus = .TRUE.
836	CALL getin('ysinus',ysinus)
837
838	!Config Key = offline
839	!Config Desc = Nouvelle eau liquide
840	!Config Def = n
841	!Config Help = Permet de mettre en route la
842	!Config nouvelle parametrisation de l'eau liquide !
843	offline = .FALSE.
844	CALL getin('offline',offline)
845	IF (offline .AND. adjust) THEN
846	WRITE(lunout,*) &
847	'WARNING : option offline does not work with adjust=y :'
848	WRITE(lunout,*) 'the files defstoke.nc, fluxstoke.nc ', &
849	'and fluxstokev.nc will not be created'
850	WRITE(lunout,*) &
851	'only the file phystoke.nc will still be created '
852	ENDIF
853
854	!Config Key = type_trac
855	!Config Desc = Choix de couplage avec model de chimie INCA ou REPROBUS
856	!Config Def = lmdz
857	!Config Help =
858	!Config 'lmdz' = pas de couplage, pur LMDZ
859	!Config 'inca' = model de chime INCA
860	!Config 'repr' = model de chime REPROBUS
861	type_trac = 'lmdz'
862	CALL getin('type_trac',type_trac)
863
864	!Config Key = ok_dynzon
865	!Config Desc = sortie des transports zonaux dans la dynamique
866	!Config Def = n
867	!Config Help = Permet de mettre en route le calcul des transports
868	!Config
869	ok_dynzon = .FALSE.
870	CALL getin('ok_dynzon',ok_dynzon)
871
872	!Config Key = ok_dyn_ins
873	!Config Desc = sorties instantanees dans la dynamique
874	!Config Def = n
875	!Config Help =
876	!Config
877	ok_dyn_ins = .FALSE.
878	CALL getin('ok_dyn_ins',ok_dyn_ins)
879
880	!Config Key = ok_dyn_ave
881	!Config Desc = sorties moyennes dans la dynamique
882	!Config Def = n
883	!Config Help =
884	!Config
885	ok_dyn_ave = .FALSE.
886	CALL getin('ok_dyn_ave',ok_dyn_ave)
887
888	!Config Key = ok_dyn_xios
889	!Config Desc = sorties moyennes dans la dynamique
890	!Config Def = n
891	!Config Help =
892	!Config
893	ok_dyn_xios = .FALSE.
894	CALL getin('ok_dyn_xios',ok_dyn_xios)
895
896	!Config Key = use_filtre_fft
897	!Config Desc = flag to activate FFTs for the filter
898	!Config Def = false
899	!Config Help = enables to use FFts to do the longitudinal polar
900	!Config filtering around the poles.
901	use_filtre_fft=.FALSE.
902	CALL getin('use_filtre_fft',use_filtre_fft)
903	IF (use_filtre_fft .AND. grossismx /= 1.0) THEN
904	write(lunout,*)'WARNING !!! '
905	write(lunout,*)"A zoom in longitude is not compatible", &
906	" with the FFT filter ", &
907	"---> FFT filter deactivated"
908	use_filtre_fft=.FALSE.
909	ENDIF
910	use_filtre_fft_loc=use_filtre_fft
911
912	!Config Key = use_mpi_alloc
913	!Config Desc = Utilise un buffer MPI en mï¿½moire globale
914	!Config Def = false
915	!Config Help = permet d'activer l'utilisation d'un buffer MPI
916	!Config en mï¿½moire globale a l'aide de la fonction MPI_ALLOC.
917	!Config Cela peut amï¿½liorer la bande passante des transferts MPI
918	!Config d'un facteur 2
919	use_mpi_alloc=.FALSE.
920	CALL getin('use_mpi_alloc',use_mpi_alloc)
921
922	!Config key = ok_strato
923	!Config Desc = activation de la version strato
924	!Config Def = .FALSE.
925	!Config Help = active la version stratosphérique de LMDZ de F. Lott
926
927	ok_strato=.FALSE.
928	CALL getin('ok_strato',ok_strato)
929
930	vert_prof_dissip = merge(1, 0, ok_strato .and. llm==39)
931	CALL getin('vert_prof_dissip', vert_prof_dissip)
932	call assert(vert_prof_dissip == 0 .or. vert_prof_dissip == 1, &
933	"bad value for vert_prof_dissip")
934
935	!Config Key = ok_gradsfile
936	!Config Desc = activation des sorties grads du guidage
937	!Config Def = n
938	!Config Help = active les sorties grads du guidage
939
940	ok_gradsfile = .FALSE.
941	CALL getin('ok_gradsfile',ok_gradsfile)
942
943	!Config Key = ok_limit
944	!Config Desc = creation des fichiers limit dans create_etat0_limit
945	!Config Def = y
946	!Config Help = production du fichier limit.nc requise
947
948	ok_limit = .TRUE.
949	CALL getin('ok_limit',ok_limit)
950
951	!Config Key = ok_etat0
952	!Config Desc = creation des fichiers etat0 dans create_etat0_limit
953	!Config Def = y
954	!Config Help = production des fichiers start.nc, startphy.nc requise
955
956	ok_etat0 = .TRUE.
957	CALL getin('ok_etat0',ok_etat0)
958
959	!Config Key = read_orop
960	!Config Desc = lecture du fichier de params orographiques sous maille
961	!Config Def = f
962	!Config Help = lecture fichier plutot que grid_noro
963
964	read_orop = .FALSE.
965	CALL getin('read_orop',read_orop)
966
967	write(lunout,*)' #########################################'
968	write(lunout,*)' Configuration des parametres de cel0_limit: '
969	write(lunout,*)' planet_type = ', planet_type
970	write(lunout,*)' calend = ', calend
971	write(lunout,*)' dayref = ', dayref
972	write(lunout,*)' anneeref = ', anneeref
973	write(lunout,*)' nday = ', nday
974	write(lunout,*)' day_step = ', day_step
975	write(lunout,*)' iperiod = ', iperiod
976	write(lunout,*)' iconser = ', iconser
977	write(lunout,*)' iecri = ', iecri
978	write(lunout,*)' periodav = ', periodav
979	write(lunout,*)' output_grads_dyn = ', output_grads_dyn
980	write(lunout,*)' dissip_period = ', dissip_period
981	write(lunout,*)' lstardis = ', lstardis
982	write(lunout,*)' nitergdiv = ', nitergdiv
983	write(lunout,*)' nitergrot = ', nitergrot
984	write(lunout,*)' niterh = ', niterh
985	write(lunout,*)' tetagdiv = ', tetagdiv
986	write(lunout,*)' tetagrot = ', tetagrot
987	write(lunout,*)' tetatemp = ', tetatemp
988	write(lunout,*)' coefdis = ', coefdis
989	write(lunout,*)' purmats = ', purmats
990	write(lunout,*)' read_start = ', read_start
991	write(lunout,*)' iflag_phys = ', iflag_phys
992	write(lunout,*)' iphysiq = ', iphysiq
993	write(lunout,*)' clon = ', clon
994	write(lunout,*)' clat = ', clat
995	write(lunout,*)' grossismx = ', grossismx
996	write(lunout,*)' grossismy = ', grossismy
997	write(lunout,*)' fxyhypb = ', fxyhypb
998	write(lunout,*)' dzoomx = ', dzoomx
999	write(lunout,*)' dzoomy = ', dzoomy
1000	write(lunout,*)' taux = ', taux
1001	write(lunout,*)' tauy = ', tauy
1002	write(lunout,*)' offline = ', offline
1003	write(lunout,*)' type_trac = ', type_trac
1004	write(lunout,*)' ok_dynzon = ', ok_dynzon
1005	write(lunout,*)' ok_dyn_ins = ', ok_dyn_ins
1006	write(lunout,*)' ok_dyn_ave = ', ok_dyn_ave
1007	write(lunout,*)' ok_dyn_xios = ', ok_dyn_xios
1008	write(lunout,*)' use_filtre_fft = ', use_filtre_fft
1009	write(lunout,*)' use_mpi_alloc = ', use_mpi_alloc
1010	write(lunout,*)' ok_strato = ', ok_strato
1011	write(lunout,*)' ok_gradsfile = ', ok_gradsfile
1012	write(lunout,*)' ok_limit = ', ok_limit
1013	write(lunout,*)' ok_etat0 = ', ok_etat0
1014	write(lunout,*)' ok_guide = ', ok_guide
1015	write(lunout,*)' read_orop = ', read_orop
1016	ENDIF test_etatinit
1017
1018	END SUBROUTINE conf_gcm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format