Context Navigation

infotrac.F90 @ 3923

Last change on this file since 3923 was 3923, checked in by fhourdin, 3 years ago
Version modifiee par Camille pour compatibilité avec la physique isotopique.
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:keywords set to `Id`
File size: 38.3 KB

Rev	Line
[1279]	1	! $Id: infotrac.F90 3923 2021-06-08 09:31:06Z fhourdin $
	2	!
[1114]	3	MODULE infotrac
	4
	5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
	6	INTEGER, SAVE :: nqtot
[2086]	7	!CR: on ajoute le nombre de traceurs de l eau
	8	INTEGER, SAVE :: nqo
[1114]	9
	10	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
	11	! number of tracers used in the physics
	12	INTEGER, SAVE :: nbtr
	13
[3923]	14	! CRisi: on retranche les isotopes des traceurs habituels
	15	! On fait un tableaux d'indices des traceurs qui passeront dans phytrac
	16	INTEGER, SAVE :: nqtottr
	17	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: itr_indice
	18
	19	! CRisi: nb traceurs p?res= directement advect?s par l'air
[2270]	20	INTEGER, SAVE :: nqperes
	21
[3870]	22	! ThL: nb traceurs INCA
[3865]	23	INTEGER, SAVE :: nqINCA
	24
[3870]	25	! ThL: nb traceurs CO2
	26	INTEGER, SAVE :: nqCO2
	27
[1114]	28	! Name variables
	29	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
	30	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
	31
	32	! iadv : index of trasport schema for each tracer
	33	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
	34
	35	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
	36	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
	37	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
	38
[2270]	39	! CRisi: tableaux de fils
	40	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqfils
[3923]	41	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqdesc ! nombres de fils + nombre de tous les petits fils sur toutes les g?n?rations
[2270]	42	INTEGER, SAVE :: nqdesc_tot
	43	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqfils
	44	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iqpere
[3800]	45	REAL :: qperemin,masseqmin,ratiomin ! MVals et CRisi
	46	PARAMETER (qperemin=1e-16,masseqmin=1e-16,ratiomin=1e-16) ! MVals
[2270]	47
[1279]	48	! conv_flg(it)=0 : convection desactivated for tracer number it
[1114]	49	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
[1279]	50	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
[1114]	51	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
	52
[1279]	53	CHARACTER(len=4),SAVE :: type_trac
[2180]	54	CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym
[3870]	55
[2690]	56	! CRisi: cas particulier des isotopes
	57	LOGICAL,SAVE :: ok_isotopes,ok_iso_verif,ok_isotrac,ok_init_iso
	58	INTEGER :: niso_possibles
	59	PARAMETER ( niso_possibles=5)
	60	REAL, DIMENSION (niso_possibles),SAVE :: tnat,alpha_ideal
	61	LOGICAL, DIMENSION(niso_possibles),SAVE :: use_iso
	62	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqiso ! donne indice iq en fn de (ixt,phase)
[3923]	63	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_num ! donne num?ro iso entre 1 et niso_possibles en fn de nqtot
	64	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_indnum ! donne num?ro iso entre 1 et niso effectif en fn de nqtot
	65	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: zone_num ! donne num?ro de la zone de tracage en fn de nqtot
	66	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: phase_num ! donne num?ro de la zone de tracage en fn de nqtot
	67	INTEGER, DIMENSION(niso_possibles), SAVE :: indnum_fn_num ! donne indice entre entre 1 et niso en fonction du num?ro d isotope entre 1 et niso_possibles
	68	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: index_trac ! num?ro ixt en fn izone, indnum entre 1 et niso
[2690]	69	INTEGER,SAVE :: niso,ntraceurs_zone,ntraciso
	70
	71	#ifdef CPP_StratAer
	72	!--CK/OB for stratospheric aerosols
	73	INTEGER, SAVE :: nbtr_bin
	74	INTEGER, SAVE :: nbtr_sulgas
	75	INTEGER, SAVE :: id_OCS_strat
	76	INTEGER, SAVE :: id_SO2_strat
	77	INTEGER, SAVE :: id_H2SO4_strat
	78	INTEGER, SAVE :: id_BIN01_strat
	79	INTEGER, SAVE :: id_TEST_strat
	80	#endif
[1279]	81
[1114]	82	CONTAINS
	83
	84	SUBROUTINE infotrac_init
[2391]	85	USE control_mod, ONLY: planet_type, config_inca
[1565]	86	#ifdef REPROBUS
	87	USE CHEM_REP, ONLY : Init_chem_rep_trac
	88	#endif
[1114]	89	IMPLICIT NONE
	90	!=======================================================================
	91	!
	92	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
	93	! -------
	94	! Modif special traceur F.Forget 05/94
	95	! Modif M-A Filiberti 02/02 lecture de traceur.def
	96	!
	97	! Objet:
	98	! ------
	99	! GCM LMD nouvelle grille
	100	!
	101	!=======================================================================
	102	! ... modification de l'integration de q ( 26/04/94 ) ....
	103	!-----------------------------------------------------------------------
	104	! Declarations
	105
	106	INCLUDE "dimensions.h"
	107	INCLUDE "iniprint.h"
	108
	109	! Local variables
	110	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
	111	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
	112
[2566]	113	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv_inca ! index of horizontal trasport schema
	114	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv_inca ! index of vertical trasport schema
	115
[3870]	116	INTEGER, ALLOCATABLE, DIMENSION(:) :: conv_flg_inca
	117	INTEGER, ALLOCATABLE, DIMENSION(:) :: pbl_flg_inca
	118	CHARACTER(len=8), ALLOCATABLE, DIMENSION(:) :: solsym_inca
	119
[3923]	120	CHARACTER(len=30), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
	121	CHARACTER(len=30), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name: CRisi
[1114]	122	CHARACTER(len=3), DIMENSION(30) :: descrq
	123	CHARACTER(len=1), DIMENSION(3) :: txts
	124	CHARACTER(len=2), DIMENSION(9) :: txtp
[1454]	125	CHARACTER(len=23) :: str1,str2
[1114]	126
	127	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
[3923]	128	INTEGER :: iq, new_iq, iiq, jq, ierr,itr
[2270]	129	INTEGER :: ifils,ipere,generation ! CRisi
	130	LOGICAL :: continu,nouveau_traceurdef
	131	INTEGER :: IOstatus ! gestion de la retrocompatibilite de traceur.def
[3923]	132	CHARACTER(len=30) :: tchaine
[1454]	133
	134	character(len=*),parameter :: modname="infotrac_init"
[3865]	135
[1114]	136	!-----------------------------------------------------------------------
	137	! Initialization :
	138	!
	139	txts=(/'x','y','z'/)
	140	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
	141
	142	descrq(14)='VLH'
	143	descrq(10)='VL1'
	144	descrq(11)='VLP'
	145	descrq(12)='FH1'
	146	descrq(13)='FH2'
	147	descrq(16)='PPM'
	148	descrq(17)='PPS'
	149	descrq(18)='PPP'
	150	descrq(20)='SLP'
	151	descrq(30)='PRA'
[1279]	152
[1114]	153
[1569]	154	! Coherence test between parameter type_trac, config_inca and preprocessing keys
[1563]	155	IF (type_trac=='inca') THEN
[3865]	156	WRITE(lunout,*) 'You have chosen to couple with INCA chemistry model : type_trac=', &
[1563]	157	type_trac,' config_inca=',config_inca
[2180]	158	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
[1563]	159	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
	160	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
[3872]	161	ENDIF
[1569]	162	#ifndef INCA
	163	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
	164	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
	165	#endif
[1565]	166	ELSE IF (type_trac=='repr') THEN
[3865]	167	WRITE(lunout,*) 'You have chosen to couple with REPROBUS chemestry model : type_trac=', type_trac
[1569]	168	#ifndef REPROBUS
	169	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
	170	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
	171	#endif
[3361]	172	ELSE IF (type_trac == 'co2i') THEN
	173	WRITE(lunout,*) 'You have chosen to run with CO2 cycle: type_trac=', type_trac
[2690]	174	ELSE IF (type_trac == 'coag') THEN
	175	WRITE(lunout,*) 'Tracers are treated for COAGULATION tests : type_trac=', type_trac
	176	#ifndef CPP_StratAer
	177	WRITE(lunout,*) 'To run this option you must add cpp key StratAer and compile with StratAer code'
	178	CALL abort_gcm('infotrac_init','You must compile with cpp key StratAer',1)
	179	#endif
[1563]	180	ELSE IF (type_trac == 'lmdz') THEN
	181	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
[3865]	182	ELSE IF (type_trac == 'inco') THEN ! ThL
	183	WRITE(lunout,*) 'Using jointly INCA and CO2 cycle: type_trac =', type_trac
	184	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
	185	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
	186	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
[3872]	187	ENDIF
[3865]	188	#ifndef INCA
	189	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compilewith INCA code'
	190	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
	191	#endif
[1279]	192	ELSE
[1563]	193	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
	194	CALL abort_gcm('infotrac_init','bad parameter',1)
[3872]	195	ENDIF
[1279]	196
[1563]	197	! Test if config_inca is other then none for run without INCA
[3865]	198	IF (type_trac/='inca' .AND. type_trac/='inco' .AND. config_inca/='none') THEN
[1563]	199	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
	200	config_inca='none'
[3872]	201	ENDIF
[1563]	202
[1114]	203	!-----------------------------------------------------------------------
	204	!
	205	! 1) Get the true number of tracers + water vapor/liquid
	206	! Here true tracers (nqtrue) means declared tracers (only first order)
	207	!
	208	!-----------------------------------------------------------------------
[3361]	209	IF (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac == 'coag' .OR. type_trac == 'co2i') THEN
[3872]	210	IF (type_trac=='co2i') THEN
[3870]	211	nqCO2 = 1
	212	ELSE
	213	nqCO2 = 0
	214	ENDIF
[1114]	215	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	216	IF(ierr.EQ.0) THEN
[1454]	217	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
[1114]	218	READ(90,*) nqtrue
[2270]	219	write(lunout,*) 'nqtrue=',nqtrue
[1114]	220	ELSE
[1454]	221	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
	222	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
[2690]	223	IF (planet_type=='earth') THEN
[1454]	224	nqtrue=4 ! Default value for Earth
[2690]	225	ELSE
[1454]	226	nqtrue=1 ! Default value for other planets
[2690]	227	ENDIF
	228	ENDIF
[2262]	229	!jyg<
	230	!! if ( planet_type=='earth') then
	231	!! ! For Earth, water vapour & liquid tracers are not in the physics
	232	!! nbtr=nqtrue-2
	233	!! else
	234	!! ! Other planets (for now); we have the same number of tracers
	235	!! ! in the dynamics than in the physics
	236	!! nbtr=nqtrue
	237	!! endif
	238	!>jyg
[3870]	239	ELSE ! type_trac=inca or inco
[3872]	240	IF (type_trac=='inco') THEN
[3870]	241	nqCO2 = 1
	242	ELSE
	243	nqCO2 = 0
	244	ENDIF
[2262]	245	!jyg<
	246	! The traceur.def file is used to define the number "nqo" of water phases
	247	! present in the simulation. Default : nqo = 2.
	248	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	249	IF(ierr.EQ.0) THEN
	250	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
	251	READ(90,*) nqo
	252	ELSE
	253	WRITE(lunout,*) trim(modname),': Using default value for nqo'
	254	nqo=2
	255	ENDIF
[2362]	256	IF (nqo /= 2 .AND. nqo /= 3 ) THEN
[3865]	257	IF (nqo == 4 .AND. type_trac=='inco') THEN ! ThL
	258	WRITE(lunout,*) trim(modname),': you are coupling with INCA, and also using CO2i.'
[3923]	259	nqo = 3 ! A am?liorier... je force 3 traceurs eau... ThL
[3865]	260	WRITE(lunout,*) trim(modname),': nqo = ',nqo
	261	ELSE
	262	WRITE(lunout,*) trim(modname),': nqo=',nqo, ' is not allowed. Only 2 or 3 water phases allowed'
[2262]	263	CALL abort_gcm('infotrac_init','Bad number of water phases',1)
[3865]	264	ENDIF
[3872]	265	ENDIF
[1563]	266	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
[2372]	267	#ifdef INCA
[3870]	268	CALL Init_chem_inca_trac(nqINCA)
	269	#else
	270	nqINCA=0
	271	#endif
	272	nbtr=nqINCA+nqCO2
[3872]	273	nqtrue=nbtr+nqo
[3865]	274	WRITE(lunout,*) trim(modname),': nqo = ',nqo
	275	WRITE(lunout,*) trim(modname),': nbtr = ',nbtr
	276	WRITE(lunout,*) trim(modname),': nqtrue = ',nqtrue
[3870]	277	WRITE(lunout,*) trim(modname),': nqCO2 = ',nqCO2
[3872]	278	WRITE(lunout,*) trim(modname),': nqINCA = ',nqINCA
	279	ALLOCATE(hadv_inca(nqINCA), vadv_inca(nqINCA), conv_flg_inca(nqINCA), pbl_flg_inca(nqINCA), solsym_inca(nqINCA))
[3870]	280	ENDIF ! type_trac 'inca' ou 'inco'
[2262]	281	!>jyg
[1114]	282
[1454]	283	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
[3872]	284	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowed. 2 tracers is the minimum'
[1114]	285	CALL abort_gcm('infotrac_init','Not enough tracers',1)
[3872]	286	ENDIF
[1563]	287
[2262]	288	!jyg<
[1565]	289	! Transfert number of tracers to Reprobus
[2262]	290	!! IF (type_trac == 'repr') THEN
	291	!!#ifdef REPROBUS
	292	!! CALL Init_chem_rep_trac(nbtr)
	293	!!#endif
[3872]	294	!! ENDIF
[2262]	295	!>jyg
[1563]	296
[1114]	297	!
[2262]	298	! Allocate variables depending on nqtrue
[1114]	299	!
[2270]	300	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue),tnom_transp(nqtrue))
[2566]	301
[2262]	302	!
	303	!jyg<
	304	!! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	305	!! conv_flg(:) = 1 ! convection activated for all tracers
	306	!! pbl_flg(:) = 1 ! boundary layer activated for all tracers
	307	!>jyg
[1114]	308
	309	!-----------------------------------------------------------------------
	310	! 2) Choix des schemas d'advection pour l'eau et les traceurs
	311	!
	312	! iadv = 1 schema transport type "humidite specifique LMD"
	313	! iadv = 2 schema amont
	314	! iadv = 14 schema Van-leer + humidite specifique
	315	! Modif F.Codron
	316	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
	317	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
	318	! iadv = 12 schema Frederic Hourdin I
	319	! iadv = 13 schema Frederic Hourdin II
	320	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
[3923]	321	! iadv = 17 schema PPM Semi Monotone (overshoots autoris?s)
	322	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autoris?s)
[1114]	323	! iadv = 20 schema Slopes
	324	! iadv = 30 schema Prather
	325	!
	326	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
	327	! iq = 2 pour l'eau liquide
	328	! Et eventuellement iq = 3,nqtot pour les autres traceurs
	329	!
	330	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
	331	!------------------------------------------------------------------------
	332	!
	333	! Get choice of advection schema from file tracer.def or from INCA
	334	!---------------------------------------------------------------------
[3361]	335	IF (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac == 'coag' .OR. type_trac == 'co2i') THEN
[1114]	336	IF(ierr.EQ.0) THEN
	337	! Continue to read tracer.def
	338	DO iq=1,nqtrue
[2270]	339
	340	write(,) 'infotrac 237: iq=',iq
	341	! CRisi: ajout du nom du fluide transporteur
	342	! mais rester retro compatible
	343	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	344	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	345	write(lunout,*) 'tchaine=',trim(tchaine)
	346	write(,) 'infotrac 238: IOstatus=',IOstatus
	347	if (IOstatus.ne.0) then
	348	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	349	endif
	350	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	351	! espace ou pas au milieu de la chaine.
[2391]	352	continu=.true.
	353	nouveau_traceurdef=.false.
[2270]	354	iiq=1
	355	do while (continu)
	356	if (tchaine(iiq:iiq).eq.' ') then
[2391]	357	nouveau_traceurdef=.true.
	358	continu=.false.
[2270]	359	else if (iiq.lt.LEN_TRIM(tchaine)) then
	360	iiq=iiq+1
	361	else
[2391]	362	continu=.false.
[2270]	363	endif
	364	enddo
	365	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	366	if (nouveau_traceurdef) then
	367	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	368	tnom_0(iq)=tchaine(1:iiq-1)
[3923]	369	tnom_transp(iq)=tchaine(iiq+1:30)
[2270]	370	else
	371	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	372	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	373	tnom_0(iq)=tchaine
	374	tnom_transp(iq) = 'air'
	375	endif
	376	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
	377	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	378
[3872]	379	ENDDO!DO iq=1,nqtrue
[1114]	380	CLOSE(90)
[2270]	381
[1454]	382	ELSE ! Without tracer.def, set default values
	383	if (planet_type=="earth") then
	384	! for Earth, default is to have 4 tracers
[1114]	385	hadv(1) = 14
	386	vadv(1) = 14
	387	tnom_0(1) = 'H2Ov'
[2270]	388	tnom_transp(1) = 'air'
[1114]	389	hadv(2) = 10
	390	vadv(2) = 10
	391	tnom_0(2) = 'H2Ol'
[2270]	392	tnom_transp(2) = 'air'
[1114]	393	hadv(3) = 10
	394	vadv(3) = 10
	395	tnom_0(3) = 'RN'
[2270]	396	tnom_transp(3) = 'air'
[1114]	397	hadv(4) = 10
	398	vadv(4) = 10
	399	tnom_0(4) = 'PB'
[2270]	400	tnom_transp(4) = 'air'
[1454]	401	else ! default for other planets
	402	hadv(1) = 10
	403	vadv(1) = 10
	404	tnom_0(1) = 'dummy'
[2270]	405	tnom_transp(1) = 'dummy'
[1454]	406	endif ! of if (planet_type=="earth")
[3872]	407	ENDIF
[1114]	408
[1454]	409	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
[3865]	410	WRITE(lunout,*) trim(modname),': nombre total de traceurs ',nqtrue
[1114]	411	DO iq=1,nqtrue
[2270]	412	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq),tnom_transp(iq)
[1114]	413	END DO
	414
[2690]	415	IF ( planet_type=='earth') THEN
[2262]	416	!CR: nombre de traceurs de l eau
[2690]	417	IF (tnom_0(3) == 'H2Oi') THEN
[2262]	418	nqo=3
[2690]	419	ELSE
[2262]	420	nqo=2
[2690]	421	ENDIF
[2262]	422	! For Earth, water vapour & liquid tracers are not in the physics
	423	nbtr=nqtrue-nqo
[2690]	424	ELSE
[2262]	425	! Other planets (for now); we have the same number of tracers
	426	! in the dynamics than in the physics
	427	nbtr=nqtrue
[2690]	428	ENDIF
[2262]	429
[2690]	430	#ifdef CPP_StratAer
	431	IF (type_trac == 'coag') THEN
	432	nbtr_bin=0
	433	nbtr_sulgas=0
	434	DO iq=1,nqtrue
	435	IF (tnom_0(iq)(1:3)=='BIN') THEN !check if tracer name contains 'BIN'
	436	nbtr_bin=nbtr_bin+1
	437	ENDIF
	438	IF (tnom_0(iq)(1:3)=='GAS') THEN !check if tracer name contains 'GAS'
	439	nbtr_sulgas=nbtr_sulgas+1
	440	ENDIF
	441	ENDDO
	442	print*,'nbtr_bin=',nbtr_bin
	443	print*,'nbtr_sulgas=',nbtr_sulgas
	444	DO iq=1,nqtrue
	445	IF (tnom_0(iq)=='GASOCS') THEN
	446	id_OCS_strat=iq-nqo
	447	ENDIF
	448	IF (tnom_0(iq)=='GASSO2') THEN
	449	id_SO2_strat=iq-nqo
	450	ENDIF
	451	IF (tnom_0(iq)=='GASH2SO4') THEN
	452	id_H2SO4_strat=iq-nqo
	453	ENDIF
	454	IF (tnom_0(iq)=='BIN01') THEN
	455	id_BIN01_strat=iq-nqo
	456	ENDIF
	457	IF (tnom_0(iq)=='GASTEST') THEN
	458	id_TEST_strat=iq-nqo
	459	ENDIF
	460	ENDDO
	461	print*,'id_OCS_strat =',id_OCS_strat
	462	print*,'id_SO2_strat =',id_SO2_strat
	463	print*,'id_H2SO4_strat=',id_H2SO4_strat
	464	print*,'id_BIN01_strat=',id_BIN01_strat
	465	ENDIF
	466	#endif
	467
[3865]	468	ENDIF ! (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac = 'coag' .OR. type_trac = 'co2i')
[2262]	469	!jyg<
	470	!
[2566]	471
[1114]	472	!-----------------------------------------------------------------------
	473	!
	474	! 3) Verify if advection schema 20 or 30 choosen
	475	! Calculate total number of tracers needed: nqtot
	476	! Allocate variables depending on total number of tracers
	477	!-----------------------------------------------------------------------
	478	new_iq=0
	479	DO iq=1,nqtrue
	480	! Add tracers for certain advection schema
	481	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
	482	new_iq=new_iq+1 ! no tracers added
	483	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
	484	new_iq=new_iq+4 ! 3 tracers added
	485	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
	486	new_iq=new_iq+10 ! 9 tracers added
	487	ELSE
[1454]	488	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
[1114]	489	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
[3872]	490	ENDIF
[1114]	491	END DO
	492
	493	IF (new_iq /= nqtrue) THEN
	494	! The choice of advection schema imposes more tracers
	495	! Assigne total number of tracers
	496	nqtot = new_iq
	497
[1454]	498	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
[1114]	499	WRITE(lunout,*) 'makes it necessary to add tracers'
[1454]	500	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
	501	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
[1114]	502
	503	ELSE
	504	! The true number of tracers is also the total number
	505	nqtot = nqtrue
[3872]	506	ENDIF
[1114]	507
	508	!
	509	! Allocate variables with total number of tracers, nqtot
	510	!
	511	ALLOCATE(tname(nqtot), ttext(nqtot))
	512	ALLOCATE(iadv(nqtot), niadv(nqtot))
	513
	514	!-----------------------------------------------------------------------
	515	!
	516	! 4) Determine iadv, long and short name
	517	!
	518	!-----------------------------------------------------------------------
	519	new_iq=0
	520	DO iq=1,nqtrue
	521	new_iq=new_iq+1
	522
	523	! Verify choice of advection schema
	524	IF (hadv(iq)==vadv(iq)) THEN
	525	iadv(new_iq)=hadv(iq)
	526	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
	527	iadv(new_iq)=11
	528	ELSE
[1454]	529	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
	530
[1114]	531	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
[3872]	532	ENDIF
[1114]	533
	534	str1=tnom_0(iq)
	535	tname(new_iq)= tnom_0(iq)
	536	IF (iadv(new_iq)==0) THEN
[1454]	537	ttext(new_iq)=trim(str1)
[1114]	538	ELSE
[1454]	539	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
[3872]	540	ENDIF
[1114]	541
	542	! schemas tenant compte des moments d'ordre superieur
	543	str2=ttext(new_iq)
	544	IF (iadv(new_iq)==20) THEN
	545	DO jq=1,3
	546	new_iq=new_iq+1
	547	iadv(new_iq)=-20
[1454]	548	ttext(new_iq)=trim(str2)//txts(jq)
	549	tname(new_iq)=trim(str1)//txts(jq)
[1114]	550	END DO
	551	ELSE IF (iadv(new_iq)==30) THEN
	552	DO jq=1,9
	553	new_iq=new_iq+1
	554	iadv(new_iq)=-30
[1454]	555	ttext(new_iq)=trim(str2)//txtp(jq)
	556	tname(new_iq)=trim(str1)//txtp(jq)
[1114]	557	END DO
[3872]	558	ENDIF
[1114]	559	END DO
	560
	561	!
	562	! Find vector keeping the correspodence between true and total tracers
	563	!
	564	niadv(:)=0
	565	iiq=0
	566	DO iq=1,nqtot
	567	IF(iadv(iq).GE.0) THEN
	568	! True tracer
	569	iiq=iiq+1
	570	niadv(iiq)=iq
	571	ENDIF
	572	END DO
	573
	574
[1454]	575	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
	576	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
[1114]	577	DO iq=1,nqtot
[1454]	578	WRITE(lunout,*) iadv(iq),niadv(iq),&
	579	' ',trim(tname(iq)),' ',trim(ttext(iq))
[1114]	580	END DO
	581
[1279]	582	!
	583	! Test for advection schema.
	584	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
	585	!
	586	DO iq=1,nqtot
	587	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
[1454]	588	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	589	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
	590	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
[1454]	591	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	592	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
[3872]	593	ENDIF
[1279]	594	END DO
	595
[2270]	596
[3923]	597	! CRisi: quels sont les traceurs fils et les traceurs p?res.
	598	! initialiser tous les tableaux d'indices li?s aux traceurs familiaux
	599	! + v?rifier que tous les p?res sont ?crits en premi?res positions
[2270]	600	ALLOCATE(nqfils(nqtot),nqdesc(nqtot))
	601	ALLOCATE(iqfils(nqtot,nqtot))
	602	ALLOCATE(iqpere(nqtot))
	603	nqperes=0
	604	nqfils(:)=0
	605	nqdesc(:)=0
	606	iqfils(:,:)=0
	607	iqpere(:)=0
	608	nqdesc_tot=0
	609	DO iq=1,nqtot
	610	if (tnom_transp(iq) == 'air') then
[3923]	611	! ceci est un traceur p?re
[2270]	612	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un pere'
	613	nqperes=nqperes+1
	614	iqpere(iq)=0
	615	else !if (tnom_transp(iq) == 'air') then
[3923]	616	! ceci est un fils. Qui est son p?re?
[2270]	617	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un fils'
	618	continu=.true.
	619	ipere=1
	620	do while (continu)
	621	if (tnom_transp(iq) == tnom_0(ipere)) then
[3923]	622	! Son p?re est ipere
[2270]	623	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
	624	& trim(tnom_0(iq)),' est le fils de ',ipere,'appele ',trim(tnom_0(ipere))
[3923]	625	if (iq.eq.ipere) then
	626	CALL abort_gcm('infotrac_init','Un fils est son propre pere',1)
	627	endif
[2270]	628	nqfils(ipere)=nqfils(ipere)+1
	629	iqfils(nqfils(ipere),ipere)=iq
	630	iqpere(iq)=ipere
	631	continu=.false.
	632	else !if (tnom_transp(iq) == tnom_0(ipere)) then
	633	ipere=ipere+1
	634	if (ipere.gt.nqtot) then
	635	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
[3361]	636	& trim(tnom_0(iq)),', est orphelin.'
[2270]	637	CALL abort_gcm('infotrac_init','Un traceur est orphelin',1)
	638	endif !if (ipere.gt.nqtot) then
	639	endif !if (tnom_transp(iq) == tnom_0(ipere)) then
	640	enddo !do while (continu)
	641	endif !if (tnom_transp(iq) == 'air') then
	642	enddo !DO iq=1,nqtot
	643	WRITE(lunout,*) 'infotrac: nqperes=',nqperes
	644	WRITE(lunout,*) 'nqfils=',nqfils
	645	WRITE(lunout,*) 'iqpere=',iqpere
	646	WRITE(lunout,*) 'iqfils=',iqfils
	647
[3923]	648	! Calculer le nombre de descendants ? partir de iqfils et de nbfils
[2270]	649	DO iq=1,nqtot
	650	generation=0
	651	continu=.true.
	652	ifils=iq
	653	do while (continu)
	654	ipere=iqpere(ifils)
	655	if (ipere.gt.0) then
	656	nqdesc(ipere)=nqdesc(ipere)+1
	657	nqdesc_tot=nqdesc_tot+1
	658	iqfils(nqdesc(ipere),ipere)=iq
	659	ifils=ipere
	660	generation=generation+1
	661	else !if (ipere.gt.0) then
	662	continu=.false.
	663	endif !if (ipere.gt.0) then
	664	enddo !do while (continu)
	665	WRITE(lunout,*) 'Le traceur ',iq,', appele ',trim(tnom_0(iq)),' est un traceur de generation: ',generation
	666	enddo !DO iq=1,nqtot
	667	WRITE(lunout,*) 'infotrac: nqdesc=',nqdesc
	668	WRITE(lunout,*) 'iqfils=',iqfils
	669	WRITE(lunout,*) 'nqdesc_tot=',nqdesc_tot
	670
[3923]	671	! Interdire autres sch?mas que 10 pour les traceurs fils, et autres sch?mas
	672	! que 10 et 14 si des p?res ont des fils
[2270]	673	do iq=1,nqtot
	674	if (iqpere(iq).gt.0) then
[3923]	675	! ce traceur a un p?re qui n'est pas l'air
	676	! Seul le sch?ma 10 est autoris?
[2270]	677	if (iadv(iq)/=10) then
	678	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for sons'
	679	CALL abort_gcm('infotrac_init','Sons should be advected by scheme 10',1)
	680	endif
[3923]	681	! Le traceur p?re ne peut ?tre advect? que par sch?ma 10 ou 14:
[2270]	682	IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	683	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for fathers'
	684	CALL abort_gcm('infotrac_init','Fathers should be advected by scheme 10 ou 14',1)
	685	endif !IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	686	endif !if (iqpere(iq).gt.0) the
	687	enddo !do iq=1,nqtot
	688
	689
[3923]	690
[2270]	691	! detecter quels sont les traceurs isotopiques parmi des traceurs
	692	call infotrac_isoinit(tnom_0,nqtrue)
[3923]	693
	694	! if (ntraciso.gt.0) then
	695	! le 18 sep 2020: on enl?ve la condition ntraciso.gt.0 car nqtottr doit ?tre
	696	! connu m?me si il n'y a pas d'isotopes!
	697	write(lunout,*) 'infotrac 702: nbtr,ntraciso=',nbtr,ntraciso
	698	! retrancher les traceurs isotopiques de la liste des traceurs qui passent dans
	699	! phytrac
	700	nbtr=nbtr-nqo*ntraciso
	701
	702	! faire un tableau d'indice des traceurs qui passeront dans phytrac
	703	nqtottr=nqtot-nqo*(1+ntraciso)
	704	write(lunout,*) 'infotrac 704: nqtottr,nqtot,nqo=',nqtottr,nqtot,nqo
	705	! Rq: nqtottr n'est pas forc?ment ?gal ? nbtr dans le cas o? new_iq /= nqtrue
	706	ALLOCATE (itr_indice(nqtottr))
	707	itr_indice(:)=0
	708	itr=0
	709	do iq=nqo+1, nqtot
	710	if (iso_num(iq).eq.0) then
	711	itr=itr+1
	712	write(,) 'itr=',itr
	713	itr_indice(itr)=iq
	714	endif !if (iso_num(iq).eq.0) then
	715	enddo
	716	if (itr.ne.nqtottr) then
	717	CALL abort_gcm('infotrac_init','pb dans le calcul de nqtottr',1)
	718	endif
	719	write(lunout,*) 'itr_indice=',itr_indice
	720	! endif !if (ntraciso.gt.0) then
	721
	722
	723	! Transfert number of tracers to Reprobus
	724	IF (type_trac == 'repr') THEN
	725	#ifdef REPROBUS
	726	CALL Init_chem_rep_trac(nbtr,nqo,tnom_0)
	727	#endif
	728	ENDIF
	729	!
	730	! Allocate variables depending on nbtr
	731	!
	732	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	733	conv_flg(:) = 1 ! convection activated for all tracers
	734	pbl_flg(:) = 1 ! boundary layer activated for all tracers
	735	!
	736	!! ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
	737	!
	738	IF (type_trac == 'inca' .OR. type_trac == 'inco') THEN ! config_inca='aero' ou 'chem'
	739	!>jyg
	740	! le module de chimie fournit les noms des traceurs
	741	! et les schemas d'advection associes. excepte pour ceux lus
	742	! dans traceur.def
	743	IF (ierr .eq. 0) then
	744	DO iq=1,nqo+nqCO2
	745
	746	write(,) 'infotrac 237: iq=',iq
	747	! CRisi: ajout du nom du fluide transporteur
	748	! mais rester retro compatible
	749	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	750	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	751	write(lunout,*) 'tchaine=',trim(tchaine)
	752	write(,) 'infotrac 238: IOstatus=',IOstatus
	753	if (IOstatus.ne.0) then
	754	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	755	endif
	756	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	757	! espace ou pas au milieu de la chaine.
	758	continu=.true.
	759	nouveau_traceurdef=.false.
	760	iiq=1
	761	do while (continu)
	762	if (tchaine(iiq:iiq).eq.' ') then
	763	nouveau_traceurdef=.true.
	764	continu=.false.
	765	else if (iiq.lt.LEN_TRIM(tchaine)) then
	766	iiq=iiq+1
	767	else
	768	continu=.false.
	769	endif
	770	enddo
	771	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	772	if (nouveau_traceurdef) then
	773	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	774	tnom_0(iq)=tchaine(1:iiq-1)
	775	tnom_transp(iq)=tchaine(iiq+1:30)
	776	else
	777	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	778	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	779	tnom_0(iq)=tchaine
	780	tnom_transp(iq) = 'air'
	781	endif
	782	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
	783	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	784
	785	ENDDO !DO iq=1,nqo
	786	CLOSE(90)
	787	ELSE !! if traceur.def doesn't exist
	788	tnom_0(1)='H2Ov'
	789	tnom_transp(1) = 'air'
	790	tnom_0(2)='H2Ol'
	791	tnom_transp(2) = 'air'
	792	hadv(1) = 10
	793	hadv(2) = 10
	794	vadv(1) = 10
	795	vadv(2) = 10
	796	ENDIF
	797
	798	#ifdef INCA
	799	CALL init_transport( &
	800	hadv_inca, &
	801	vadv_inca, &
	802	conv_flg_inca, &
	803	pbl_flg_inca, &
	804	solsym_inca)
	805
	806	conv_flg(1+nqCO2:nbtr) = conv_flg_inca
	807	pbl_flg(1+nqCO2:nbtr) = pbl_flg_inca
	808	solsym(1+nqCO2:nbtr) = solsym_inca
	809
	810	IF (type_trac == 'inco') THEN
	811	conv_flg(1:nqCO2) = 1
	812	pbl_flg(1:nqCO2) = 1
	813	solsym(1:nqCO2) = 'CO2'
	814	ENDIF
	815	#endif
	816
	817	!jyg<
	818	DO iq = nqo+nqCO2+1, nqtrue
	819	hadv(iq) = hadv_inca(iq-nqo-nqCO2)
	820	vadv(iq) = vadv_inca(iq-nqo-nqCO2)
	821	tnom_0(iq)=solsym_inca(iq-nqo-nqCO2)
	822	tnom_transp(iq) = 'air'
	823	END DO
	824
	825	ENDIF ! (type_trac == 'inca' or 'inco')
	826
[1114]	827	!-----------------------------------------------------------------------
	828	! Finalize :
	829	!
[2270]	830	DEALLOCATE(tnom_0, hadv, vadv,tnom_transp)
[1114]	831
[3923]	832	WRITE(lunout,*) 'infotrac init fin'
[2180]	833
[1114]	834	END SUBROUTINE infotrac_init
	835
[2270]	836	SUBROUTINE infotrac_isoinit(tnom_0,nqtrue)
	837
	838	#ifdef CPP_IOIPSL
	839	use IOIPSL
	840	#else
	841	! if not using IOIPSL, we still need to use (a local version of) getin
	842	use ioipsl_getincom
	843	#endif
	844	implicit none
	845
	846	! inputs
	847	INTEGER nqtrue
[3923]	848	CHARACTER(len=30) tnom_0(nqtrue)
[2270]	849
	850	! locals
	851	CHARACTER(len=3), DIMENSION(niso_possibles) :: tnom_iso
	852	INTEGER, ALLOCATABLE,DIMENSION(:,:) :: nb_iso,nb_traciso
	853	INTEGER, ALLOCATABLE,DIMENSION(:) :: nb_isoind
	854	INTEGER :: ntraceurs_zone_prec,iq,phase,ixt,iiso,izone
	855	CHARACTER(len=19) :: tnom_trac
	856	INCLUDE "iniprint.h"
	857
	858	tnom_iso=(/'eau','HDO','O18','O17','HTO'/)
	859
	860	ALLOCATE(nb_iso(niso_possibles,nqo))
	861	ALLOCATE(nb_isoind(nqo))
	862	ALLOCATE(nb_traciso(niso_possibles,nqo))
	863	ALLOCATE(iso_num(nqtot))
	864	ALLOCATE(iso_indnum(nqtot))
	865	ALLOCATE(zone_num(nqtot))
	866	ALLOCATE(phase_num(nqtot))
	867
	868	iso_num(:)=0
	869	iso_indnum(:)=0
	870	zone_num(:)=0
	871	phase_num(:)=0
	872	indnum_fn_num(:)=0
	873	use_iso(:)=.false.
	874	nb_iso(:,:)=0
	875	nb_isoind(:)=0
	876	nb_traciso(:,:)=0
	877	niso=0
	878	ntraceurs_zone=0
	879	ntraceurs_zone_prec=0
	880	ntraciso=0
	881
	882	do iq=nqo+1,nqtot
[2372]	883	! write(lunout,*) 'infotrac 569: iq,tnom_0(iq)=',iq,tnom_0(iq)
[2270]	884	do phase=1,nqo
	885	do ixt= 1,niso_possibles
	886	tnom_trac=trim(tnom_0(phase))//'_'
	887	tnom_trac=trim(tnom_trac)//trim(tnom_iso(ixt))
[2372]	888	! write(,) 'phase,ixt,tnom_trac=',phase,ixt,tnom_trac
[2270]	889	IF (tnom_0(iq) == tnom_trac) then
[2372]	890	! write(lunout,*) 'Ce traceur est un isotope'
[2270]	891	nb_iso(ixt,phase)=nb_iso(ixt,phase)+1
	892	nb_isoind(phase)=nb_isoind(phase)+1
	893	iso_num(iq)=ixt
	894	iso_indnum(iq)=nb_isoind(phase)
	895	indnum_fn_num(ixt)=iso_indnum(iq)
	896	phase_num(iq)=phase
[2372]	897	! write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	898	! write(lunout,*) 'iso_indnum(iq)=',iso_indnum(iq)
	899	! write(lunout,*) 'indnum_fn_num(ixt)=',indnum_fn_num(ixt)
	900	! write(lunout,*) 'phase_num(iq)=',phase_num(iq)
[2270]	901	goto 20
	902	else if (iqpere(iq).gt.0) then
	903	if (tnom_0(iqpere(iq)) == tnom_trac) then
[2372]	904	! write(lunout,*) 'Ce traceur est le fils d''un isotope'
[2270]	905	! c'est un traceur d'isotope
	906	nb_traciso(ixt,phase)=nb_traciso(ixt,phase)+1
	907	iso_num(iq)=ixt
	908	iso_indnum(iq)=indnum_fn_num(ixt)
	909	zone_num(iq)=nb_traciso(ixt,phase)
	910	phase_num(iq)=phase
[2372]	911	! write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	912	! write(lunout,*) 'phase_num(iq)=',phase_num(iq)
	913	! write(lunout,*) 'zone_num(iq)=',zone_num(iq)
[2270]	914	goto 20
	915	endif !if (tnom_0(iqpere(iq)) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	916	endif !IF (tnom_0(iq) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	917	enddo !do ixt= niso_possibles
	918	enddo !do phase=1,nqo
	919	20 continue
	920	enddo !do iq=1,nqtot
	921
[2372]	922	! write(lunout,*) 'iso_num=',iso_num
	923	! write(lunout,*) 'iso_indnum=',iso_indnum
	924	! write(lunout,*) 'zone_num=',zone_num
	925	! write(lunout,*) 'phase_num=',phase_num
	926	! write(lunout,*) 'indnum_fn_num=',indnum_fn_num
[2270]	927
	928	do ixt= 1,niso_possibles
	929
	930	if (nb_iso(ixt,1).eq.1) then
[3923]	931	! on v?rifie que toutes les phases ont le m?me nombre de
[2270]	932	! traceurs
	933	do phase=2,nqo
	934	if (nb_iso(ixt,phase).ne.nb_iso(ixt,1)) then
[2372]	935	! write(lunout,*) 'ixt,phase,nb_iso=',ixt,phase,nb_iso(ixt,phase)
[2270]	936	CALL abort_gcm('infotrac_init','Phases must have same number of isotopes',1)
	937	endif
	938	enddo !do phase=2,nqo
	939
	940	niso=niso+1
	941	use_iso(ixt)=.true.
	942	ntraceurs_zone=nb_traciso(ixt,1)
	943
[3923]	944	! on v?rifie que toutes les phases ont le m?me nombre de
[2270]	945	! traceurs
	946	do phase=2,nqo
	947	if (nb_traciso(ixt,phase).ne.ntraceurs_zone) then
	948	write(lunout,*) 'ixt,phase,nb_traciso=',ixt,phase,nb_traciso(ixt,phase)
	949	write(lunout,*) 'ntraceurs_zone=',ntraceurs_zone
	950	CALL abort_gcm('infotrac_init','Phases must have same number of tracers',1)
	951	endif
	952	enddo !do phase=2,nqo
[3923]	953	! on v?rifie que tous les isotopes ont le m?me nombre de
[2270]	954	! traceurs
	955	if (ntraceurs_zone_prec.gt.0) then
	956	if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	957	ntraceurs_zone_prec=ntraceurs_zone
	958	else !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	959	write(,) 'ntraceurs_zone_prec,ntraceurs_zone=',ntraceurs_zone_prec,ntraceurs_zone
	960	CALL abort_gcm('infotrac_init', &
	961	&'Isotope tracers are not well defined in traceur.def',1)
	962	endif !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	963	endif !if (ntraceurs_zone_prec.gt.0) then
	964
	965	else if (nb_iso(ixt,1).ne.0) then
	966	WRITE(lunout,*) 'nqo,ixt=',nqo,ixt
	967	WRITE(lunout,*) 'nb_iso(ixt,1)=',nb_iso(ixt,1)
	968	CALL abort_gcm('infotrac_init','Isotopes are not well defined in traceur.def',1)
	969	endif !if (nb_iso(ixt,1).eq.1) then
	970	enddo ! do ixt= niso_possibles
	971
	972	! dimensions isotopique:
	973	ntraciso=niso*(ntraceurs_zone+1)
[2372]	974	! WRITE(lunout,*) 'niso=',niso
	975	! WRITE(lunout,*) 'ntraceurs_zone,ntraciso=',ntraceurs_zone,ntraciso
[2270]	976
	977	! flags isotopiques:
	978	if (niso.gt.0) then
	979	ok_isotopes=.true.
	980	else
	981	ok_isotopes=.false.
	982	endif
[2372]	983	! WRITE(lunout,*) 'ok_isotopes=',ok_isotopes
[2270]	984
	985	if (ok_isotopes) then
	986	ok_iso_verif=.false.
	987	call getin('ok_iso_verif',ok_iso_verif)
	988	ok_init_iso=.false.
	989	call getin('ok_init_iso',ok_init_iso)
	990	tnat=(/1.0,155.76e-6,2005.2e-6,0.004/100.,0.0/)
	991	alpha_ideal=(/1.0,1.01,1.006,1.003,1.0/)
	992	endif !if (ok_isotopes) then
[2372]	993	! WRITE(lunout,*) 'ok_iso_verif=',ok_iso_verif
	994	! WRITE(lunout,*) 'ok_init_iso=',ok_init_iso
[2270]	995
	996	if (ntraceurs_zone.gt.0) then
	997	ok_isotrac=.true.
	998	else
	999	ok_isotrac=.false.
	1000	endif
[2372]	1001	! WRITE(lunout,*) 'ok_isotrac=',ok_isotrac
[2270]	1002
	1003	! remplissage du tableau iqiso(ntraciso,phase)
	1004	ALLOCATE(iqiso(ntraciso,nqo))
	1005	iqiso(:,:)=0
	1006	do iq=1,nqtot
	1007	if (iso_num(iq).gt.0) then
	1008	ixt=iso_indnum(iq)+zone_num(iq)*niso
	1009	iqiso(ixt,phase_num(iq))=iq
	1010	endif
	1011	enddo
[2372]	1012	! WRITE(lunout,*) 'iqiso=',iqiso
[2270]	1013
	1014	! replissage du tableau index_trac(ntraceurs_zone,niso)
	1015	ALLOCATE(index_trac(ntraceurs_zone,niso))
	1016	if (ok_isotrac) then
	1017	do iiso=1,niso
	1018	do izone=1,ntraceurs_zone
	1019	index_trac(izone,iiso)=iiso+izone*niso
	1020	enddo
	1021	enddo
	1022	else !if (ok_isotrac) then
	1023	index_trac(:,:)=0.0
	1024	endif !if (ok_isotrac) then
[2372]	1025	! write(lunout,*) 'index_trac=',index_trac
[2270]	1026
	1027	! Finalize :
	1028	DEALLOCATE(nb_iso)
	1029
	1030	END SUBROUTINE infotrac_isoinit
	1031
[1114]	1032	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format