1 | SUBROUTINE dynredem0(fichnom,iday_end,phis) |
---|
2 | ! |
---|
3 | !------------------------------------------------------------------------------- |
---|
4 | ! Write the NetCDF restart file (initialization). |
---|
5 | !------------------------------------------------------------------------------- |
---|
6 | USE IOIPSL |
---|
7 | USE strings_mod, ONLY: maxlen |
---|
8 | USE infotrac, ONLY: nqtot, tracers |
---|
9 | USE netcdf, ONLY: NF90_CREATE, NF90_DEF_DIM, NF90_INQ_VARID, NF90_GLOBAL, & |
---|
10 | NF90_CLOSE, NF90_PUT_ATT, NF90_UNLIMITED, NF90_CLOBBER, & |
---|
11 | NF90_64BIT_OFFSET |
---|
12 | USE dynredem_mod, ONLY: cre_var, put_var1, put_var2, err, modname, fil |
---|
13 | USE comvert_mod, ONLY: ap, bp, presnivs, pa, preff, nivsig, nivsigs |
---|
14 | USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad |
---|
15 | USE logic_mod, ONLY: fxyhypb, ysinus |
---|
16 | USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy, & |
---|
17 | taux,tauy |
---|
18 | USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time |
---|
19 | USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0 |
---|
20 | |
---|
21 | USE dimensions_mod, ONLY: iim, jjm, llm, ndm |
---|
22 | USE paramet_mod_h |
---|
23 | USE comgeom2_mod_h |
---|
24 | USE iniprint_mod_h |
---|
25 | IMPLICIT NONE |
---|
26 | |
---|
27 | !=============================================================================== |
---|
28 | ! Arguments: |
---|
29 | CHARACTER(LEN=*), INTENT(IN) :: fichnom !--- FILE NAME |
---|
30 | INTEGER, INTENT(IN) :: iday_end !--- |
---|
31 | REAL, INTENT(IN) :: phis(iip1, jjp1) !--- GROUND GEOPOTENTIAL |
---|
32 | !=============================================================================== |
---|
33 | ! Local variables: |
---|
34 | INTEGER :: iq |
---|
35 | INTEGER, PARAMETER :: length=100 |
---|
36 | REAL :: tab_cntrl(length) !--- RUN PARAMETERS TABLE |
---|
37 | ! For NetCDF: |
---|
38 | CHARACTER(LEN=maxlen) :: unites |
---|
39 | INTEGER :: indexID |
---|
40 | INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID |
---|
41 | INTEGER :: sID, sigID, nID, timID |
---|
42 | INTEGER :: yyears0, jjour0, mmois0 |
---|
43 | REAL :: zjulian, hours |
---|
44 | !=============================================================================== |
---|
45 | modname='dynredem0'; fil=fichnom |
---|
46 | CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian) |
---|
47 | CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours) |
---|
48 | |
---|
49 | |
---|
50 | tab_cntrl(:) = 0. |
---|
51 | tab_cntrl(1) = REAL(iim) |
---|
52 | tab_cntrl(2) = REAL(jjm) |
---|
53 | tab_cntrl(3) = REAL(llm) |
---|
54 | tab_cntrl(4) = REAL(day_ref) |
---|
55 | tab_cntrl(5) = REAL(annee_ref) |
---|
56 | tab_cntrl(6) = rad |
---|
57 | tab_cntrl(7) = omeg |
---|
58 | tab_cntrl(8) = g |
---|
59 | tab_cntrl(9) = cpp |
---|
60 | tab_cntrl(10) = kappa |
---|
61 | tab_cntrl(11) = daysec |
---|
62 | tab_cntrl(12) = dtvr |
---|
63 | tab_cntrl(13) = etot0 |
---|
64 | tab_cntrl(14) = ptot0 |
---|
65 | tab_cntrl(15) = ztot0 |
---|
66 | tab_cntrl(16) = stot0 |
---|
67 | tab_cntrl(17) = ang0 |
---|
68 | tab_cntrl(18) = pa |
---|
69 | tab_cntrl(19) = preff |
---|
70 | |
---|
71 | ! ..... parameters for zoom ...... |
---|
72 | tab_cntrl(20) = clon |
---|
73 | tab_cntrl(21) = clat |
---|
74 | tab_cntrl(22) = grossismx |
---|
75 | tab_cntrl(23) = grossismy |
---|
76 | ! |
---|
77 | IF ( fxyhypb ) THEN |
---|
78 | tab_cntrl(24) = 1. |
---|
79 | tab_cntrl(25) = dzoomx |
---|
80 | tab_cntrl(26) = dzoomy |
---|
81 | tab_cntrl(27) = 0. |
---|
82 | tab_cntrl(28) = taux |
---|
83 | tab_cntrl(29) = tauy |
---|
84 | ELSE |
---|
85 | tab_cntrl(24) = 0. |
---|
86 | tab_cntrl(25) = dzoomx |
---|
87 | tab_cntrl(26) = dzoomy |
---|
88 | tab_cntrl(27) = 0. |
---|
89 | tab_cntrl(28) = 0. |
---|
90 | tab_cntrl(29) = 0. |
---|
91 | IF( ysinus ) tab_cntrl(27) = 1. |
---|
92 | END IF |
---|
93 | tab_cntrl(30) = REAL(iday_end) |
---|
94 | tab_cntrl(31) = REAL(itau_dyn + itaufin) |
---|
95 | ! start_time: start_time of simulation (not necessarily 0.) |
---|
96 | tab_cntrl(32) = start_time |
---|
97 | |
---|
98 | !--- File creation |
---|
99 | CALL err(NF90_CREATE(fichnom,IOR(NF90_CLOBBER,NF90_64BIT_OFFSET),nid)) |
---|
100 | |
---|
101 | !--- Some global attributes |
---|
102 | CALL err(NF90_PUT_ATT(nid,NF90_GLOBAL,"title","Fichier demarrage dynamique")) |
---|
103 | |
---|
104 | !--- Dimensions |
---|
105 | CALL err(NF90_DEF_DIM(nid,"index", length, indexID)) |
---|
106 | CALL err(NF90_DEF_DIM(nid,"rlonu", iip1, rlonuID)) |
---|
107 | CALL err(NF90_DEF_DIM(nid,"rlatu", jjp1, rlatuID)) |
---|
108 | CALL err(NF90_DEF_DIM(nid,"rlonv", iip1, rlonvID)) |
---|
109 | CALL err(NF90_DEF_DIM(nid,"rlatv", jjm, rlatvID)) |
---|
110 | CALL err(NF90_DEF_DIM(nid,"sigs", llm, sID)) |
---|
111 | CALL err(NF90_DEF_DIM(nid,"sig", llmp1, sigID)) |
---|
112 | CALL err(NF90_DEF_DIM(nid,"temps", NF90_UNLIMITED, timID)) |
---|
113 | |
---|
114 | !--- Define and save invariant fields |
---|
115 | CALL put_var1(nid,"controle","Parametres de controle" ,[indexID],tab_cntrl) |
---|
116 | CALL put_var1(nid,"rlonu" ,"Longitudes des points U",[rlonuID],rlonu) |
---|
117 | CALL put_var1(nid,"rlatu" ,"Latitudes des points U" ,[rlatuID],rlatu) |
---|
118 | CALL put_var1(nid,"rlonv" ,"Longitudes des points V",[rlonvID],rlonv) |
---|
119 | CALL put_var1(nid,"rlatv" ,"Latitudes des points V" ,[rlatvID],rlatv) |
---|
120 | CALL put_var1(nid,"nivsigs" ,"Numero naturel des couches s" ,[sID] ,nivsigs) |
---|
121 | CALL put_var1(nid,"nivsig" ,"Numero naturel des couches sigma",[sigID],nivsig) |
---|
122 | CALL put_var1(nid,"ap" ,"Coefficient A pour hybride" ,[sigID],ap) |
---|
123 | CALL put_var1(nid,"bp" ,"Coefficient B pour hybride" ,[sigID],bp) |
---|
124 | CALL put_var1(nid,"presnivs","" ,[sID] ,presnivs) |
---|
125 | ! covariant <-> contravariant <-> natural conversion coefficients |
---|
126 | CALL put_var2(nid,"cu","Coefficient de passage pour U",[rlonuID,rlatuID],cu) |
---|
127 | CALL put_var2(nid,"cv","Coefficient de passage pour V",[rlonvID,rlatvID],cv) |
---|
128 | CALL put_var2(nid,"aire","Aires de chaque maille" ,[rlonvID,rlatuID],aire) |
---|
129 | CALL put_var2(nid,"phisinit","Geopotentiel au sol" ,[rlonvID,rlatuID],phis) |
---|
130 | |
---|
131 | !--- Define fields saved later |
---|
132 | WRITE(unites,"('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')") & |
---|
133 | yyears0,mmois0,jjour0 |
---|
134 | CALL cre_var(nid,"temps","Temps de simulation",[timID],unites) |
---|
135 | CALL cre_var(nid,"ucov" ,"Vitesse U" ,[rlonuID,rlatuID,sID,timID]) |
---|
136 | CALL cre_var(nid,"vcov" ,"Vitesse V" ,[rlonvID,rlatvID,sID,timID]) |
---|
137 | CALL cre_var(nid,"teta" ,"Temperature",[rlonvID,rlatuID,sID,timID]) |
---|
138 | DO iq=1,nqtot |
---|
139 | CALL cre_var(nid,tracers(iq)%name,tracers(iq)%longName,[rlonvID,rlatuID,sID,timID]) |
---|
140 | END DO |
---|
141 | CALL cre_var(nid,"masse","Masse d air" ,[rlonvID,rlatuID,sID,timID]) |
---|
142 | CALL cre_var(nid,"ps" ,"Pression au sol",[rlonvID,rlatuID ,timID]) |
---|
143 | CALL err(NF90_CLOSE (nid)) |
---|
144 | |
---|
145 | WRITE(lunout,*)TRIM(modname)//': iim,jjm,llm,iday_end',iim,jjm,llm,iday_end |
---|
146 | WRITE(lunout,*)TRIM(modname)//': rad,omeg,g,cpp,kappa',rad,omeg,g,cpp,kappa |
---|
147 | |
---|
148 | END SUBROUTINE dynredem0 |
---|
149 | ! |
---|
150 | !------------------------------------------------------------------------------- |
---|
151 | |
---|
152 | |
---|
153 | !------------------------------------------------------------------------------- |
---|
154 | ! |
---|
155 | SUBROUTINE dynredem1(fichnom,time,vcov,ucov,teta,q,masse,ps) |
---|
156 | ! |
---|
157 | !------------------------------------------------------------------------------- |
---|
158 | ! Purpose: Write the NetCDF restart file (append). |
---|
159 | !------------------------------------------------------------------------------- |
---|
160 | USE strings_mod, ONLY: maxlen |
---|
161 | USE infotrac, ONLY: nqtot, tracers, type_trac |
---|
162 | USE control_mod |
---|
163 | USE netcdf, ONLY: NF90_OPEN, NF90_NOWRITE, NF90_GET_VAR, NF90_INQ_VARID, & |
---|
164 | NF90_CLOSE, NF90_WRITE, NF90_PUT_VAR, NF90_NoErr |
---|
165 | USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, & |
---|
166 | err, modname, fil, msg |
---|
167 | USE temps_mod, ONLY: itau_dyn, itaufin |
---|
168 | |
---|
169 | USE dimensions_mod, ONLY: iim, jjm, llm, ndm |
---|
170 | USE paramet_mod_h |
---|
171 | USE comgeom_mod_h |
---|
172 | USE iniprint_mod_h |
---|
173 | IMPLICIT NONE |
---|
174 | |
---|
175 | |
---|
176 | !=============================================================================== |
---|
177 | ! Arguments: |
---|
178 | CHARACTER(LEN=*), INTENT(IN) :: fichnom !-- FILE NAME |
---|
179 | REAL, INTENT(IN) :: time !-- TIME |
---|
180 | REAL, INTENT(IN) :: vcov(iip1,jjm, llm) !-- V COVARIANT WIND |
---|
181 | REAL, INTENT(IN) :: ucov(iip1,jjp1,llm) !-- U COVARIANT WIND |
---|
182 | REAL, INTENT(IN) :: teta(iip1,jjp1,llm) !-- POTENTIAL TEMPERATURE |
---|
183 | REAL, INTENT(INOUT) :: q(iip1,jjp1,llm,nqtot) !-- TRACERS |
---|
184 | REAL, INTENT(IN) :: masse(iip1,jjp1,llm) !-- MASS PER CELL |
---|
185 | REAL, INTENT(IN) :: ps(iip1,jjp1) !-- GROUND PRESSURE |
---|
186 | !=============================================================================== |
---|
187 | ! Local variables: |
---|
188 | INTEGER :: iq, nid, vID, ierr, nid_trac, vID_trac |
---|
189 | INTEGER, SAVE :: nb=0 |
---|
190 | INTEGER, PARAMETER :: length=100 |
---|
191 | REAL :: tab_cntrl(length) ! tableau des parametres du run |
---|
192 | CHARACTER(LEN=maxlen) :: var, dum |
---|
193 | LOGICAL :: lread_inca |
---|
194 | !=============================================================================== |
---|
195 | |
---|
196 | modname='dynredem1'; fil=fichnom |
---|
197 | CALL err(NF90_OPEN(fil,NF90_WRITE,nid),"open",fil) |
---|
198 | |
---|
199 | !--- Write/extend time coordinate |
---|
200 | nb = nb + 1 |
---|
201 | var="temps" |
---|
202 | CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) |
---|
203 | CALL err(NF90_PUT_VAR(nid,vID,[time]),"put",var) |
---|
204 | WRITE(lunout,*)TRIM(modname)//": Saving for ", nb, time |
---|
205 | |
---|
206 | !--- Rewrite control table (itaufin undefined in dynredem0) |
---|
207 | var="controle" |
---|
208 | CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) |
---|
209 | CALL err(NF90_GET_VAR(nid,vID,tab_cntrl),"get",var) |
---|
210 | tab_cntrl(31)=DBLE(itau_dyn + itaufin) |
---|
211 | CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var) |
---|
212 | CALL err(NF90_PUT_VAR(nid,vID,tab_cntrl),"put",var) |
---|
213 | |
---|
214 | !--- Save fields |
---|
215 | CALL dynredem_write_u(nid,"ucov" ,ucov ,llm) |
---|
216 | CALL dynredem_write_v(nid,"vcov" ,vcov ,llm) |
---|
217 | CALL dynredem_write_u(nid,"teta" ,teta ,llm) |
---|
218 | CALL dynredem_write_u(nid,"masse",masse,llm) |
---|
219 | CALL dynredem_write_u(nid,"ps" ,ps ,1) |
---|
220 | |
---|
221 | !--- Tracers in file "start_trac.nc" (added by Anne) |
---|
222 | lread_inca=.FALSE.; fil="start_trac.nc" |
---|
223 | IF(ANY(type_trac == ['inca','inco'])) INQUIRE(FILE=fil,EXIST=lread_inca) |
---|
224 | IF(lread_inca) CALL err(NF90_OPEN(fil,NF90_NOWRITE,nid_trac),"open") |
---|
225 | |
---|
226 | !--- Save tracers |
---|
227 | DO iq=1,nqtot; var=TRIM(tracers(iq)%name); ierr=-1 |
---|
228 | IF(lread_inca) THEN !--- Possibly read from "start_trac.nc" |
---|
229 | fil="start_trac.nc" |
---|
230 | ierr=NF90_INQ_VARID(nid_trac,var,vID_trac) |
---|
231 | dum='inq'; IF(ierr==NF90_NoErr) dum='fnd' |
---|
232 | WRITE(lunout,*)msg(dum,var) |
---|
233 | |
---|
234 | |
---|
235 | IF(ierr==NF90_NoErr) CALL dynredem_read_u(nid_trac,var,q(:,:,:,iq),llm) |
---|
236 | END IF |
---|
237 | fil=fichnom |
---|
238 | CALL dynredem_write_u(nid,var,q(:,:,:,iq),llm) |
---|
239 | END DO |
---|
240 | CALL err(NF90_CLOSE(nid),"close") |
---|
241 | fil="start_trac.nc" |
---|
242 | IF(lread_inca) CALL err(NF90_CLOSE(nid_trac),"close") |
---|
243 | |
---|
244 | END SUBROUTINE dynredem1 |
---|
245 | |
---|