Context Navigation

scm.f90 @ 5440

Last change on this file since 5440 was 5302, checked in by abarral, 7 weeks ago
Turn compar1d.h date_cas.h into module Move fcg_racmo.h to obsolete
File size: 40.7 KB

Line
1	SUBROUTINE scm
2
3	USE flux_arp_mod_h
4	USE compbl_mod_h
5	USE clesphys_mod_h
6	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
7	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
8	clwcon, detr_therm, &
9	qsol, fevap, z0m, z0h, agesno, &
10	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
11	falb_dir, falb_dif, &
12	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
13	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
14	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
15	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
16	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
17	awake_dens, cv_gen, wake_cstar, &
18	zgam, zmax0, zmea, zpic, zsig, &
19	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, &
20	ql_ancien, qs_ancien, qbs_ancien, cf_ancien, rvc_ancien, &
21	prlw_ancien, prsw_ancien, prbsw_ancien, prw_ancien, &
22	u10m,v10m,ale_wake,ale_bl_stat, ratqs_inter_
23
24
25	USE dimphy
26	USE surface_data, only : type_ocean,ok_veget
27	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
28	pbl_surface_final
29	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
30
31	USE infotrac ! new
32	USE control_mod
33	USE indice_sol_mod
34	USE phyaqua_mod
35	! USE mod_1D_cases_read
36	USE mod_1D_cases_read_std
37	!USE mod_1D_amma_read
38	USE print_control_mod, ONLY: lunout, prt_level
39	USE iniphysiq_mod, ONLY: iniphysiq
40	USE mod_const_mpi, ONLY: comm_lmdz
41	USE physiq_mod, ONLY: physiq
42	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
43	preff, aps, bps, pseudoalt, scaleheight
44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
45	itau_dyn, itau_phy, start_time, year_len
46	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
47	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
48
49	USE dimensions_mod, ONLY: iim, jjm, llm, ndm
50	USE dimsoil_mod_h, ONLY: nsoilmx
51	USE yomcst_mod_h
52	USE tsoilnudge_mod_h
53	USE fcg_gcssold_mod_h
54	USE compar1d_mod_h
55	USE date_cas_mod_h
56	implicit none
57
58	!=====================================================================
59	! DECLARATIONS
60	!=====================================================================
61
62	!---------------------------------------------------------------------
63	! Externals
64	!---------------------------------------------------------------------
65	external fq_sat
66	real fq_sat
67
68	!---------------------------------------------------------------------
69	! Arguments d' initialisations de la physique (USER DEFINE)
70	!---------------------------------------------------------------------
71
72	integer, parameter :: ngrid=1
73	real :: zcufi = 1.
74	real :: zcvfi = 1.
75	real :: fnday
76	real :: day, daytime
77	real :: day1
78	real :: heure
79	integer :: jour
80	integer :: mois
81	integer :: an
82
83	!---------------------------------------------------------------------
84	! Declarations related to forcing and initial profiles
85	!---------------------------------------------------------------------
86
87	integer :: kmax = llm
88	integer llm700,nq1,nq2
89	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
90	real timestep, frac
91	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
92	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
93	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
94	real dqtdxls(nlev_max),dqtdyls(nlev_max)
95	real dqtdtls(nlev_max),thlpcar(nlev_max)
96	real qprof(nlev_max,nqmx)
97
98	! integer :: forcing_type
99	logical :: forcing_les = .false.
100	logical :: forcing_armcu = .false.
101	logical :: forcing_rico = .false.
102	logical :: forcing_radconv = .false.
103	logical :: forcing_toga = .false.
104	logical :: forcing_twpice = .false.
105	logical :: forcing_amma = .false.
106	logical :: forcing_dice = .false.
107	logical :: forcing_gabls4 = .false.
108
109	logical :: forcing_GCM2SCM = .false.
110	logical :: forcing_GCSSold = .false.
111	logical :: forcing_sandu = .false.
112	logical :: forcing_astex = .false.
113	logical :: forcing_fire = .false.
114	logical :: forcing_case = .false.
115	logical :: forcing_case2 = .false.
116	logical :: forcing_SCM = .false.
117
118	!flag forcings
119	logical :: nudge_wind=.true.
120	logical :: nudge_thermo=.false.
121	logical :: cptadvw=.true.
122
123
124	!=====================================================================
125	! DECLARATIONS FOR EACH CASE
126	!=====================================================================
127	!
128	INCLUDE "1D_decl_cases.h"
129	!
130	!---------------------------------------------------------------------
131	! Declarations related to nudging
132	!---------------------------------------------------------------------
133	integer :: nudge_max
134	parameter (nudge_max=9)
135	integer :: inudge_RHT=1
136	integer :: inudge_UV=2
137	logical :: nudge(nudge_max)
138	real :: t_targ(llm)
139	real :: rh_targ(llm)
140	real :: u_targ(llm)
141	real :: v_targ(llm)
142	!
143	!---------------------------------------------------------------------
144	! Declarations related to vertical discretization:
145	!---------------------------------------------------------------------
146	real :: pzero=1.e5
147	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
148	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
149
150	!---------------------------------------------------------------------
151	! Declarations related to variables
152	!---------------------------------------------------------------------
153
154	real :: phi(llm)
155	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
156	REAL rot(1, llm) ! relative vorticity, in s-1
157	real :: rlat_rad(1),rlon_rad(1)
158	real :: omega(llm),omega2(llm),rho(llm+1)
159	real :: ug(llm),vg(llm),fcoriolis
160	real :: sfdt, cfdt
161	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
162	real :: w_adv(llm),z_adv(llm)
163	real :: d_t_vert_adv(llm),d_u_vert_adv(llm),d_v_vert_adv(llm)
164	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
165	real :: d_u_nudge(llm),d_v_nudge(llm)
166	! real :: d_u_adv(llm),d_v_adv(llm)
167	real :: d_u_age(llm),d_v_age(llm)
168	real :: alpha
169	real :: ttt
170
171	REAL, ALLOCATABLE, DIMENSION(:,:):: q
172	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
173	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_vert_adv
174	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
175	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
176	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
177
178	!---------------------------------------------------------------------
179	! Initialization of surface variables
180	!---------------------------------------------------------------------
181	real :: run_off_lic_0(1)
182	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
183	real :: tsoil(1,nsoilmx,nbsrf)
184	! real :: agesno(1,nbsrf)
185
186	!---------------------------------------------------------------------
187	! Call to phyredem
188	!---------------------------------------------------------------------
189	logical :: ok_writedem =.true.
190	real :: sollw_in = 0.
191	real :: solsw_in = 0.
192
193	!---------------------------------------------------------------------
194	! Call to physiq
195	!---------------------------------------------------------------------
196	logical :: firstcall=.true.
197	logical :: lastcall=.false.
198	real :: phis(1) = 0.0
199	real :: dpsrf(1)
200
201	!---------------------------------------------------------------------
202	! Initializations of boundary conditions
203	!---------------------------------------------------------------------
204	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
205	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
206	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
207	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
208	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
209	real, allocatable :: phy_ice (:) ! Fraction de glace
210	real, allocatable :: phy_fter(:) ! Fraction de terre
211	real, allocatable :: phy_foce(:) ! Fraction de ocean
212	real, allocatable :: phy_fsic(:) ! Fraction de glace
213	real, allocatable :: phy_flic(:) ! Fraction de glace
214
215	!---------------------------------------------------------------------
216	! Fichiers et d'autres variables
217	!---------------------------------------------------------------------
218	integer :: k,l,i,it=1,mxcalc
219	integer :: nsrf
220	integer jcode
221	INTEGER read_climoz
222	!
223	integer :: it_end ! iteration number of the last call
224	!Al1,plev,play,phi,phis,presnivs,
225	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
226	data ecrit_slab_oc/-1/
227	!
228	! if flag_inhib_forcing = 0, tendencies of forcing are added
229	! <> 0, tendencies of forcing are not added
230	INTEGER :: flag_inhib_forcing = 0
231
232
233	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
234
235	!=====================================================================
236	! INITIALIZATIONS
237	!=====================================================================
238	du_phys(:)=0.
239	dv_phys(:)=0.
240	dt_phys(:)=0.
241	d_t_vert_adv(:)=0.
242	d_u_vert_adv(:)=0.
243	d_v_vert_adv(:)=0.
244	dt_cooling(:)=0.
245	d_t_adv(:)=0.
246	d_t_nudge(:)=0.
247	d_u_nudge(:)=0.
248	d_v_nudge(:)=0.
249	d_u_adv(:)=0.
250	d_v_adv(:)=0.
251	d_u_age(:)=0.
252	d_v_age(:)=0.
253
254
255	! Initialization of Common turb_forcing
256	dtime_frcg = 0.
257	Turb_fcg_gcssold=.false.
258	hthturb_gcssold = 0.
259	hqturb_gcssold = 0.
260
261
262
263
264	!---------------------------------------------------------------------
265	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
266	!---------------------------------------------------------------------
267	call conf_unicol
268	!Al1 moves this gcssold var from common fcg_gcssold to
269	Turb_fcg_gcssold = xTurb_fcg_gcssold
270	! --------------------------------------------------------------------
271	close(1)
272	write(,) 'lmdz1d.def lu => unicol.def'
273
274	forcing_SCM = .true.
275	year_ini_cas=1997
276	! It is possible that those parameters are run twice.
277	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
278
279
280	call getin('anneeref',year_ini_cas)
281	call getin('dayref',day_deb)
282	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
283	call getin('time_ini',heure_ini_cas)
284
285	print*,'NATURE DE LA SURFACE ',nat_surf
286	!
287	! Initialization of the logical switch for nudging
288
289	jcode = iflag_nudge
290	do i = 1,nudge_max
291	nudge(i) = mod(jcode,10) .ge. 1
292	jcode = jcode/10
293	enddo
294	!-----------------------------------------------------------------------
295	! Definition of the run
296	!-----------------------------------------------------------------------
297
298	call conf_gcm( 99, .TRUE. )
299
300	!-----------------------------------------------------------------------
301	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
302	phy_nat(:)=0.0
303	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
304	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
305	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
306	phy_bil(:)=1.0
307	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
308	allocate( phy_ice (year_len)) ! Fraction de glace
309	phy_ice(:)=0.0
310	allocate( phy_fter(year_len)) ! Fraction de terre
311	phy_fter(:)=0.0
312	allocate( phy_foce(year_len)) ! Fraction de ocean
313	phy_foce(:)=0.0
314	allocate( phy_fsic(year_len)) ! Fraction de glace
315	phy_fsic(:)=0.0
316	allocate( phy_flic(year_len)) ! Fraction de glace
317	phy_flic(:)=0.0
318
319
320	!-----------------------------------------------------------------------
321	! Choix du calendrier
322	! -------------------
323
324	! calend = 'earth_365d'
325	if (calend == 'earth_360d') then
326	call ioconf_calendar('360_day')
327	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
328	else if (calend == 'earth_365d') then
329	call ioconf_calendar('noleap')
330	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
331	else if (calend == 'earth_366d') then
332	call ioconf_calendar('all_leap')
333	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
334	else if (calend == 'gregorian') then
335	stop 'gregorian calend should not be used by normal user'
336	call ioconf_calendar('gregorian') ! not to be used by normal users
337	write(,)'CALENDRIER CHOISI: Gregorien'
338	else
339	write (,) 'ERROR : unknown calendar ', calend
340	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
341	endif
342	!-----------------------------------------------------------------------
343	!
344	!c Date :
345	! La date est supposee donnee sous la forme [annee, numero du jour dans
346	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
347	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
348	! Le numero du jour est dans "day". L heure est traitee separement.
349	! La date complete est dans "daytime" (l'unite est le jour).
350
351
352	if (nday>0) then
353	fnday=nday
354	else
355	fnday=-nday/float(day_step)
356	endif
357	print *,'fnday=',fnday
358	! start_time doit etre en FRACTION DE JOUR
359	start_time=time_ini/24.
360
361	annee_ref = anneeref
362	mois = 1
363	day_ref = dayref
364	heure = 0.
365	itau_dyn = 0
366	itau_phy = 0
367	call ymds2ju(annee_ref,mois,day_ref,heure,day)
368	day_ini = int(day)
369	day_end = day_ini + int(fnday)
370
371	! Convert the initial date to Julian day
372	day_ini_cas=day_deb
373	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
374	call ymds2ju &
375	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
376	& ,day_ju_ini_cas)
377	print*,'time case 2',day_ini_cas,day_ju_ini_cas
378	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
379
380	! Print out the actual date of the beginning of the simulation :
381	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
382	print *,' Time of beginning : ', &
383	& year_print, month_print, day_print, sec_print
384
385	!---------------------------------------------------------------------
386	! Initialization of dimensions, geometry and initial state
387	!---------------------------------------------------------------------
388	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
389	! but we still need to initialize dimphy module (klon,klev,etc.) here.
390	call init_dimphy1D(1,llm)
391	call suphel
392	call init_infotrac
393
394	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
395	allocate(q(llm,nqtot)) ; q(:,:)=0.
396	allocate(dq(llm,nqtot))
397	allocate(d_q_vert_adv(llm,nqtot))
398	allocate(d_q_adv(llm,nqtot))
399	allocate(d_q_nudge(llm,nqtot))
400	! allocate(d_th_adv(llm))
401
402	q(:,:) = 0.
403	dq(:,:) = 0.
404	d_q_vert_adv(:,:) = 0.
405	d_q_adv(:,:) = 0.
406	d_q_nudge(:,:) = 0.
407
408	!
409	! No ozone climatology need be read in this pre-initialization
410	! (phys_state_var_init is called again in physiq)
411	read_climoz = 0
412	nsw=6
413
414	call phys_state_var_init(read_climoz)
415
416	if (ngrid.ne.klon) then
417	print*,'stop in inifis'
418	print*,'Probleme de dimensions :'
419	print*,'ngrid = ',ngrid
420	print*,'klon = ',klon
421	stop
422	endif
423	!!!=====================================================================
424	!!! Feedback forcing values for Gateaux differentiation (al1)
425	!!!=====================================================================
426	!!
427	qsol = qsolinp
428	qsurf = fq_sat(tsurf,psurf/100.)
429	beta_aridity(:,:) = beta_surf
430	day1= day_ini
431	time=daytime-day
432	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
433	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
434
435	!
436	!! mpl et jyg le 22/08/2012 :
437	!! pour que les cas a flux de surface imposes marchent
438	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
439	fsens=-wtsurfrcpdrho(1)
440	flat=-wqsurfrlvttrho(1)
441	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
442	ENDIF
443	print*,'Flux sol ',fsens,flat
444
445	! Vertical discretization and pressure levels at half and mid levels:
446
447	pa = 5e4
448	!! preff= 1.01325e5
449	preff = psurf
450	IF (ok_old_disvert) THEN
451	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
452	print *,'On utilise disvert0'
453	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
454	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
455	scaleheight=8.
456	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
457	ELSE
458	call disvert()
459	print *,'On utilise disvert'
460	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
461	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
462	ENDIF
463
464	sig_s=presnivs/preff
465	plev =ap+bp*psurf
466	play = 0.5*(plev(1:llm)+plev(2:llm+1))
467	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles.
468
469	IF (forcing_type .eq. 59) THEN
470	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
471	write(,) '***********************'
472	do l = 1, llm
473	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
474	if (trouve_700 .and. play(l).le.70000) then
475	llm700=l
476	print *,'llm700,play=',llm700,play(l)/100.
477	trouve_700= .false.
478	endif
479	enddo
480	write(,) '***********************'
481	ENDIF
482
483	!
484	!=====================================================================
485	! EVENTUALLY, READ FORCING DATA :
486	!=====================================================================
487
488	INCLUDE "1D_read_forc_cases.h"
489	print,'A d_t_adv ',d_t_adv(1:20)86400
490
491	if (forcing_GCM2SCM) then
492	write (,) 'forcing_GCM2SCM not yet implemented'
493	stop 'in initialization'
494	endif ! forcing_GCM2SCM
495
496
497	!=====================================================================
498	! Initialisation de la physique :
499	!=====================================================================
500
501	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
502	!
503	! day_step, iphysiq lus dans gcm.def ci-dessus
504	! timestep: calcule ci-dessous from rday et day_step
505	! ngrid=1
506	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
507	! rday: defini dans suphel.F (86400.)
508	! day_ini: lu dans run.def (dayref)
509	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
510	! airefi,zcufi,zcvfi initialises au debut de ce programme
511	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
512
513
514	day_step = float(nsplit_phys)*day_step/float(iphysiq)
515	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
516	timestep =rday/day_step
517	dtime_frcg = timestep
518	!
519	zcufi=airefi
520	zcvfi=airefi
521	!
522	rlat_rad(1)=xlat*rpi/180.
523	rlon_rad(1)=xlon*rpi/180.
524
525	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
526	year_len_phys_cal_mod=year_len
527
528	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
529	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
530	! with '0.' when necessary
531
532	call iniphysiq(iim,jjm,llm, &
533	1,comm_lmdz, &
534	rday,day_ini,timestep, &
535	(/rlat_rad(1),0./),(/0./), &
536	(/0.,0./),(/rlon_rad(1),0./), &
537	(/ (/airefi,0./),(/0.,0./) /), &
538	(/zcufi,0.,0.,0./), &
539	(/zcvfi,0./), &
540	ra,rg,rd,rcpd,1)
541	print*,'apres iniphysiq'
542
543	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
544	co2_ppm= 330.0
545	solaire=1370.0
546
547	! Ecriture du startphy avant le premier appel a la physique.
548	! On le met juste avant pour avoir acces a tous les champs
549
550	if (ok_writedem) then
551
552	!--------------------------------------------------------------------------
553	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
554	! need : qsol fder snow qsurf evap rugos agesno ftsoil
555	!--------------------------------------------------------------------------
556
557	type_ocean = "force"
558	run_off_lic_0(1) = restart_runoff
559	call fonte_neige_init(run_off_lic_0)
560
561	fder=0.
562	snsrf(1,:)=snowmass ! masse de neige des sous surface
563	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
564	fevap=0.
565	z0m(1,:)=rugos ! couverture de neige des sous surface
566	z0h(1,:)=rugosh ! couverture de neige des sous surface
567	agesno = xagesno
568	tsoil(:,:,:)=tsurf
569	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
570	! tsoil(1,1,1)=299.18
571	! tsoil(1,2,1)=300.08
572	! tsoil(1,3,1)=301.88
573	! tsoil(1,4,1)=305.48
574	! tsoil(1,5,1)=308.00
575	! tsoil(1,6,1)=308.00
576	! tsoil(1,7,1)=308.00
577	! tsoil(1,8,1)=308.00
578	! tsoil(1,9,1)=308.00
579	! tsoil(1,10,1)=308.00
580	! tsoil(1,11,1)=308.00
581	!-----------------------------------------------------------------------
582	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
583
584	!------------------ prepare limit conditions for limit.nc -----------------
585	!-- Ocean force
586
587	print*,'avant phyredem'
588	pctsrf(1,:)=0.
589	if (nat_surf.eq.0.) then
590	pctsrf(1,is_oce)=1.
591	pctsrf(1,is_ter)=0.
592	pctsrf(1,is_lic)=0.
593	pctsrf(1,is_sic)=0.
594	else if (nat_surf .eq. 1) then
595	pctsrf(1,is_oce)=0.
596	pctsrf(1,is_ter)=1.
597	pctsrf(1,is_lic)=0.
598	pctsrf(1,is_sic)=0.
599	else if (nat_surf .eq. 2) then
600	pctsrf(1,is_oce)=0.
601	pctsrf(1,is_ter)=0.
602	pctsrf(1,is_lic)=1.
603	pctsrf(1,is_sic)=0.
604	else if (nat_surf .eq. 3) then
605	pctsrf(1,is_oce)=0.
606	pctsrf(1,is_ter)=0.
607	pctsrf(1,is_lic)=0.
608	pctsrf(1,is_sic)=1.
609
610	end if
611
612
613	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
614	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
615
616	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
617	zpic = zpicinp
618	ftsol=tsurf
619	falb_dir=albedo
620	falb_dif=albedo
621	rugoro=rugos
622	t_ancien(1,:)=temp(:)
623	q_ancien(1,:)=q(:,1)
624	ql_ancien = 0.
625	qs_ancien = 0.
626	prlw_ancien = 0.
627	prsw_ancien = 0.
628	prw_ancien = 0.
629	IF ( ok_bs ) THEN
630	qbs_ancien = 0.
631	prbsw_ancien = 0.
632	ENDIF
633	IF ( ok_ice_supersat ) THEN
634	cf_ancien = 0.
635	rvc_ancien = 0.
636	ENDIF
637	!jyg<
638	! Etienne: comment those lines since now the TKE is inialized in 1D_read_forc_cases
639	!! pbl_tke(:,:,:)=1.e-8
640	! pbl_tke(:,:,:)=0.
641	! pbl_tke(:,2,:)=1.e-2
642	!>jyg
643	rain_fall=0.
644	snow_fall=0.
645	solsw=0.
646	solswfdiff=0.
647	sollw=0.
648	sollwdown=rsigmatsurf*4
649	radsol=0.
650	rnebcon=0.
651	ratqs=0.
652	clwcon=0.
653	zmax0 = 0.
654	zmea=zsurf
655	zstd=0.
656	zsig=0.
657	zgam=0.
658	zval=0.
659	zthe=0.
660	sig1=0.
661	w01=0.
662	!
663	wake_deltaq = 0.
664	wake_deltat = 0.
665	wake_delta_pbl_TKE(:,:,:) = 0.
666	delta_tsurf = 0.
667	wake_fip = 0.
668	wake_pe = 0.
669	wake_s = 0.
670	awake_s = 0.
671	wake_dens = 0.
672	awake_dens = 0.
673	cv_gen = 0.
674	wake_cstar = 0.
675	ale_bl = 0.
676	ale_bl_trig = 0.
677	alp_bl = 0.
678	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
679	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
680	entr_therm = 0.
681	detr_therm = 0.
682	f0 = 0.
683	fm_therm = 0.
684	u_ancien(1,:)=u(:)
685	v_ancien(1,:)=v(:)
686
687	u10m=0.
688	v10m=0.
689	ale_wake=0.
690	ale_bl_stat=0.
691	ratqs_inter_(:,:)= 0.002
692
693	!------------------------------------------------------------------------
694	! Make file containing restart for the physics (startphy.nc)
695	!
696	! NB: List of the variables to be written by phyredem (via put_field):
697	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
698	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
699	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
700	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
701	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
702	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
703	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
704	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
705	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
706	!
707	! NB2: The content of the startphy.nc file depends on some flags defined in
708	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
709	! to be set at some arbitratry convenient values.
710	!------------------------------------------------------------------------
711	!Al1 =============== restart option ======================================
712	iflag_physiq=0
713	call getin('iflag_physiq',iflag_physiq)
714
715	if (.not.restart) then
716	iflag_pbl = 5
717	call phyredem ("startphy.nc")
718	else
719	! (desallocations)
720	print*,'callin surf final'
721	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
722	print*,'after surf final'
723	CALL fonte_neige_final(run_off_lic_0)
724	endif
725
726	ok_writedem=.false.
727	print*,'apres phyredem'
728
729	endif ! ok_writedem
730
731	!------------------------------------------------------------------------
732	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
733	! --------------------------------------------------
734	! NB: List of the variables to be written in limit.nc
735	! (by writelim.F, subroutine of 1DUTILS.h):
736	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
737	! phy_fter,phy_foce,phy_flic,phy_fsic)
738	!------------------------------------------------------------------------
739	do i=1,year_len
740	phy_nat(i) = nat_surf
741	phy_alb(i) = albedo
742	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
743	phy_rug(i) = rugos
744	phy_fter(i) = pctsrf(1,is_ter)
745	phy_foce(i) = pctsrf(1,is_oce)
746	phy_fsic(i) = pctsrf(1,is_sic)
747	phy_flic(i) = pctsrf(1,is_lic)
748	enddo
749
750	! fabrication de limit.nc
751	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
752	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
753
754
755	call phys_state_var_end
756	!Al1
757	if (restart) then
758	print*,'call to restart dyn 1d'
759	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
760	& u,v,temp,q,omega2)
761
762	print*,'fnday,annee_ref,day_ref,day_ini', &
763	& fnday,annee_ref,day_ref,day_ini
764	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
765	day = day_ini
766	day_end = day_ini + nday
767	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
768
769	! Print out the actual date of the beginning of the simulation :
770	call ju2ymds(daytime, an, mois, jour, heure)
771	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
772
773	day = int(daytime)
774	time=daytime-day
775
776	print,'*** intialised fields from restart1dyn *****'
777	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
778	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
779	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis(1)
780	! raz for safety
781	do l=1,llm
782	d_q_vert_adv(l,1) = 0.
783	enddo
784	endif
785	!====================== end restart =================================
786	IF (ecrit_slab_oc.eq.1) then
787	open(97,file='div_slab.dat',STATUS='UNKNOWN')
788	elseif (ecrit_slab_oc.eq.0) then
789	open(97,file='div_slab.dat',STATUS='OLD')
790	endif
791	!
792	!=====================================================================
793	IF (CPPKEY_OUTPUTPHYSSCM) THEN
794	CALL iophys_ini(timestep)
795	END IF
796
797	!=====================================================================
798	! START OF THE TEMPORAL LOOP :
799	!=====================================================================
800
801	it_end = nint(fnday*day_step)
802	do while(it.le.it_end)
803
804	if (prt_level.ge.1) then
805	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
806	& it,day,time,it_end,day_step
807	print*,'PAS DE TEMPS ',timestep
808	endif
809	if (it.eq.it_end) lastcall=.True.
810
811	!---------------------------------------------------------------------
812	! Interpolation of forcings in time and onto model levels
813	!---------------------------------------------------------------------
814
815	INCLUDE "1D_interp_cases.h"
816
817	!---------------------------------------------------------------------
818	! Geopotential :
819	!---------------------------------------------------------------------
820	phis(1)=zsurf*RG
821	! phi(1)=phis(1)+RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
822
823	! Calculate geopotential from the ground surface since phi and phis are added in physiq_mod
824	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
825
826	do l = 1, llm-1
827	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
828	& (play(l)-play(l+1))/(play(l)+play(l+1))
829	enddo
830
831	!---------------------------------------------------------------------
832	! Vertical advection
833	!---------------------------------------------------------------------
834
835	IF ( forc_w+forc_omega > 0 ) THEN
836
837	IF ( forc_w == 1 ) THEN
838	w_adv=w_mod_cas
839	z_adv=phi/RG
840	ELSE
841	w_adv=omega
842	z_adv=play
843	ENDIF
844
845	teta=temp(pzero/play)*rkappa
846	do l=2,llm-1
847	! vertical tendencies computed as d X / d t = -W d X / d z
848	d_u_vert_adv(l)=-w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
849	d_v_vert_adv(l)=-w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
850	! d theta / dt = -W d theta / d z, transformed into d temp / d t dividing by (pzero/play(l))**rkappa
851	d_t_vert_adv(l)=-w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)) / (pzero/play(l))*rkappa
852	d_q_vert_adv(l,1)=-w_adv(l)*(q(l+1,1)-q(l-1,1))/(z_adv(l+1)-z_adv(l-1))
853	enddo
854	d_u_adv(:)=d_u_adv(:)+d_u_vert_adv(:)
855	d_v_adv(:)=d_v_adv(:)+d_v_vert_adv(:)
856	d_t_adv(:)=d_t_adv(:)+d_t_vert_adv(:)
857	d_q_adv(:,1)=d_q_adv(:,1)+d_q_vert_adv(:,1)
858
859	ENDIF
860
861	!---------------------------------------------------------------------
862	! Listing output for debug prt_level>=1
863	!---------------------------------------------------------------------
864	if (prt_level>=1) then
865	print *,' avant physiq : -------- day time ',day,time
866	write(,) 'firstcall,lastcall,phis', &
867	& firstcall,lastcall,phis
868	end if
869	if (prt_level>=5) then
870	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
871	& 'presniv','plev','play','phi'
872	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
873	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
874	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
875	& 'presniv','u','v','temp','q1','q2','omega2'
876	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
877	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
878	endif
879
880	!---------------------------------------------------------------------
881	! Call physiq :
882	!---------------------------------------------------------------------
883	call physiq(ngrid,llm, &
884	firstcall,lastcall,timestep, &
885	plev,play,phi,phis,presnivs, &
886	u,v, rot, temp,q,omega2, &
887	du_phys,dv_phys,dt_phys,dq,dpsrf)
888	firstcall=.false.
889
890	!---------------------------------------------------------------------
891	! Listing output for debug
892	!---------------------------------------------------------------------
893	if (prt_level>=5) then
894	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
895	& 'presniv','plev','play','phi'
896	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
897	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
898	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
899	& 'presniv','u','v','temp','q1','q2','omega2'
900	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
901	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
902	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
903	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
904	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
905	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
906	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
907	write(,) 'dpsrf',dpsrf
908	endif
909	!---------------------------------------------------------------------
910	! Add physical tendencies :
911	!---------------------------------------------------------------------
912
913	fcoriolis=2.sin(rpixlat/180.)*romega
914
915	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
916	fcoriolis, xlat,mxcalc
917
918	!---------------------------------------------------------------------
919	! Geostrophic forcing
920	!---------------------------------------------------------------------
921
922	IF ( forc_geo == 0 ) THEN
923	d_u_age(1:mxcalc)=0.
924	d_v_age(1:mxcalc)=0.
925	ELSE
926	sfdt = sin(0.5fcoriolistimestep)
927	cfdt = cos(0.5fcoriolistimestep)
928
929	d_u_age(1:mxcalc)= -2.sfdt/timestep &
930	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
931	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
932	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
933	!
934	d_v_age(1:mxcalc)= -2.sfdt/timestep &
935	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
936	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
937	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
938	ENDIF
939	!
940	!---------------------------------------------------------------------
941	! Nudging
942	! EV: rewrite the section to account for a time- and height-varying
943	! nudging
944	!---------------------------------------------------------------------
945	d_t_nudge(:) = 0.
946	d_u_nudge(:) = 0.
947	d_v_nudge(:) = 0.
948	d_q_nudge(:,:) = 0.
949
950	DO l=1,llm
951
952	IF (nudging_u .LT. 0) THEN
953
954	d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))*invtau_u_nudg_mod_cas(l)
955
956	ELSE
957
958	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
959	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
960
961	ENDIF
962
963
964	IF (nudging_v .LT. 0) THEN
965
966	d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))*invtau_v_nudg_mod_cas(l)
967
968	ELSE
969
970
971	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
972	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
973
974	ENDIF
975
976
977	IF (nudging_t .LT. 0) THEN
978
979	d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))*invtau_temp_nudg_mod_cas(l)
980
981	ELSE
982
983
984	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
985	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
986
987	ENDIF
988
989
990	IF (nudging_qv .LT. 0) THEN
991
992	d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))*invtau_qv_nudg_mod_cas(l)
993
994	ELSE
995
996	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
997	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
998
999	ENDIF
1000
1001	ENDDO
1002
1003	!---------------------------------------------------------------------
1004	! Optional outputs
1005	!---------------------------------------------------------------------
1006
1007	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1008	CALL iophys_ecrit('w_adv',klev,'w_adv','K/day',w_adv)
1009	CALL iophys_ecrit('z_adv',klev,'z_adv','K/day',z_adv)
1010	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
1011	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*d_t_vert_adv)
1012	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
1013	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
1014	CALL iophys_ecrit('u',klev,'u','m/s',u)
1015	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
1016	CALL iophys_ecrit('v',klev,'v','m/s',v)
1017	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
1018	CALL iophys_ecrit('temp',klev,'temp','K',temp)
1019	CALL iophys_ecrit('tempnud',klev,'temp_nudg_mod_cas','K',temp_nudg_mod_cas)
1020	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
1021	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
1022	END IF
1023
1024	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1025
1026	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1027	& du_phys(1:mxcalc) &
1028	& +d_u_age(1:mxcalc)+d_u_adv(1:mxcalc) &
1029	& +d_u_nudge(1:mxcalc) )
1030	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1031	& dv_phys(1:mxcalc) &
1032	& +d_v_age(1:mxcalc)+d_v_adv(1:mxcalc) &
1033	& +d_v_nudge(1:mxcalc) )
1034	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1035	& dq(1:mxcalc,:) &
1036	& +d_q_adv(1:mxcalc,:) &
1037	& +d_q_nudge(1:mxcalc,:) )
1038
1039	if (prt_level.ge.3) then
1040	print *, &
1041	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1042	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1043	print* ,'dv_phys=',dv_phys
1044	print* ,'d_v_age=',d_v_age
1045	print* ,'d_v_adv=',d_v_adv
1046	print* ,'d_v_nudge=',d_v_nudge
1047	print*, v
1048	print*, vg
1049	endif
1050
1051	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1052	& dt_phys(1:mxcalc) &
1053	& +d_t_adv(1:mxcalc) &
1054	& +d_t_nudge(1:mxcalc) &
1055	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1056
1057
1058	!=======================================================================
1059	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1060	!=======================================================================
1061
1062	teta=temp(pzero/play)*rkappa
1063
1064	!---------------------------------------------------------------------
1065	! Nudge soil temperature if requested
1066	!---------------------------------------------------------------------
1067
1068	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1069	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1070	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1071	ENDIF
1072
1073	!---------------------------------------------------------------------
1074	! Add large-scale tendencies (advection, etc) :
1075	!---------------------------------------------------------------------
1076
1077	!cc nrlmd
1078	!cc tmpvar=teta
1079	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1080	!cc
1081	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1082	!cc tmpvar(:)=q(:,1)
1083	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1084	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1085	!cc tmpvar(:)=q(:,2)
1086	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1087	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1088
1089	END IF ! end if tendency of tendency should be added
1090
1091	!---------------------------------------------------------------------
1092	! Air temperature :
1093	!---------------------------------------------------------------------
1094	if (lastcall) then
1095	print*,'Pas de temps final ',it
1096	call ju2ymds(daytime, an, mois, jour, heure)
1097	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1098	endif
1099
1100	! incremente day time
1101	daytime = daytime+1./day_step
1102	day = int(daytime+0.1/day_step)
1103	! time = max(daytime-day,0.0)
1104	!Al1&jyg: correction de bug
1105	!cc time = real(mod(it,day_step))/day_step
1106	time = time_ini/24.+real(mod(it,day_step))/day_step
1107	it=it+1
1108
1109	enddo
1110
1111	if (ecrit_slab_oc.ne.-1) close(97)
1112
1113	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1114	! ---------------------------------------------------------------------------
1115	call dyn1dredem("restart1dyn.nc", &
1116	& plev,play,phi,phis,presnivs, &
1117	& u,v,temp,q,omega2)
1118
1119	CALL abort_gcm ('lmdz1d ','The End ',0)
1120
1121	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format