source: LMDZ6/branches/contrails/libf/misc/xermsg.f90 @ 5456

!DECK XERMSG
SUBROUTINE XERMSG (LIBRAR, SUBROU, MESSG, NERR, LEVEL)
  IMPLICIT NONE
  !***BEGIN PROLOGUE  XERMSG
  !***PURPOSE  Process error messages for SLATEC and other libraries.
  !***LIBRARY   SLATEC (XERROR)
  !***CATEGORY  R3C
  !***TYPE      ALL (XERMSG-A)
  !***KEYWORDS  ERROR MESSAGE, XERROR
  !***AUTHOR  Fong, Kirby, (NMFECC at LLNL)
  !***DESCRIPTION
  !
  !   XERMSG processes a diagnostic message in a manner determined by the
  !   value of LEVEL and the current value of the library error control
  !   flag, KONTRL.  See subroutine XSETF for details.
  !
  !    LIBRAR   A character constant (or character variable) with the name
  !         of the library.  This will be 'SLATEC' for the SLATEC
  !         Common Math Library.  The error handling package is
  !         general enough to be used by many libraries
  !         simultaneously, so it is desirable for the routine that
  !         detects and reports an error to identify the library name
  !         as well as the routine name.
  !
  !    SUBROU   A character constant (or character variable) with the name
  !             of the routine that detected the error.  Usually it is the
  !         name of the routine that is calling XERMSG.  There are
  !         some instances where a user callable library routine calls
  !         lower level subsidiary routines where the error is
  !         detected.  In such cases it may be more informative to
  !         supply the name of the routine the user called rather than
  !         the name of the subsidiary routine that detected the
  !         error.
  !
  !    MESSG    A character constant (or character variable) with the text
  !         of the error or warning message.  In the example below,
  !         the message is a character constant that contains a
  !         generic message.
  !
  !               CALL XERMSG ('SLATEC', 'MMPY',
  !              *'THE ORDER OF THE MATRIX EXCEEDS THE ROW DIMENSION',
  !              *3, 1)
  !
  !         It is possible (and is sometimes desirable) to generate a
  !         specific message--e.g., one that contains actual numeric
  !         values.  Specific numeric values can be converted into
  !         character strings using formatted WRITE statements into
  !         character variables.  This is called standard Fortran
  !         internal file I/O and is exemplified in the first three
  !         lines of the following example.  You can also catenate
  !         substrings of characters to construct the error message.
  !         Here is an example showing the use of both writing to
  !         an internal file and catenating character strings.
  !
  !               CHARACTER*5 CHARN, CHARL
  !               WRITE (CHARN,10) N
  !               WRITE (CHARL,10) LDA
  !            10 FORMAT(I5)
  !               CALL XERMSG ('SLATEC', 'MMPY', 'THE ORDER'//CHARN//
  !              *   ' OF THE MATRIX EXCEEDS ITS ROW DIMENSION OF'//
  !              *   CHARL, 3, 1)
  !
  !         There are two subtleties worth mentioning.  One is that
  !         the // for character catenation is used to construct the
  !         error message so that no single character constant is
  !         continued to the next line.  This avoids confusion as to
  !         whether there are trailing blanks at the end of the line.
  !         The second is that by catenating the parts of the message
  !             as an actual argument rather than encoding the entire
  !         message into one large character variable, we avoid
  !         having to know how long the message will be in order to
  !         declare an adequate length for that large character
  !         variable.  XERMSG calls XERPRN to print the message using
  !         multiple lines if necessary.  If the message is very long,
  !         XERPRN will break it into pieces of 72 characters (as
  !         requested by XERMSG) for printing on multiple lines.
  !         Also, XERMSG asks XERPRN to prefix each line with ' *  '
  !         so that the total line length could be 76 characters.
  !         Note also that XERPRN scans the error message backwards
  !         to ignore trailing blanks.  Another feature is that
  !         the substring '$$' is treated as a new line sentinel
  !         by XERPRN.  If you want to construct a multiline
  !         message without having to count out multiples of 72
  !         characters, just use '$$' as a separator.  '$$'
  !         obviously must occur within 72 characters of the
  !         start of each line to have its intended effect since
  !         XERPRN is asked to wrap around at 72 characters in
  !         addition to looking for '$$'.
  !
  !    NERR     An integer value that is chosen by the library routine's
  !         author.  It must be in the range -99 to 999 (three
  !         printable digits).  Each distinct error should have its
  !         own error number.  These error numbers should be described
  !         in the machine readable documentation for the routine.
  !         The error numbers need be unique only within each routine,
  !         so it is reasonable for each routine to start enumerating
  !         errors from 1 and proceeding to the next integer.
  !
  !    LEVEL    An integer value in the range 0 to 2 that indicates the
  !         level (severity) of the error.  Their meanings are
  !
  !        -1  A warning message.  This is used if it is not clear
  !            that there really is an error, but the user's attention
  !            may be needed.  An attempt is made to only print this
  !            message once.
  !
  !         0  A warning message.  This is used if it is not clear
  !            that there really is an error, but the user's attention
  !            may be needed.
  !
  !         1  A recoverable error.  This is used even if the error is
  !            so serious that the routine cannot return any useful
  !            answer.  If the user has told the error package to
  !            return after recoverable errors, then XERMSG will
  !            return to the Library routine which can then return to
  !            the user's routine.  The user may also permit the error
  !            package to terminate the program upon encountering a
  !            recoverable error.
  !
  !         2  A fatal error.  XERMSG will not return to its caller
  !            after it receives a fatal error.  This level should
  !            hardly ever be used; it is much better to allow the
  !            user a chance to recover.  An example of one of the few
  !            cases in which it is permissible to declare a level 2
  !            error is a reverse communication Library routine that
  !            is likely to be called repeatedly until it integrates
  !            across some interval.  If there is a serious error in
  !            the input such that another step cannot be taken and
  !            the Library routine is called again without the input
  !            error having been corrected by the caller, the Library
  !            routine will probably be called forever with improper
  !            input.  In this case, it is reasonable to declare the
  !            error to be fatal.
  !
  !    Each of the arguments to XERMSG is input; none will be modified by
  !    XERMSG.  A routine may make multiple calls to XERMSG with warning
  !    level messages; however, after a call to XERMSG with a recoverable
  !    error, the routine should return to the user.  Do not try to call
  !    XERMSG with a second recoverable error after the first recoverable
  !    error because the error package saves the error number.  The user
  !    can retrieve this error number by calling another entry point in
  !    the error handling package and then clear the error number when
  !    recovering from the error.  Calling XERMSG in succession causes the
  !    old error number to be overwritten by the latest error number.
  !    This is considered harmless for error numbers associated with
  !    warning messages but must not be done for error numbers of serious
  !    errors.  After a call to XERMSG with a recoverable error, the user
  !    must be given a chance to call NUMXER or XERCLR to retrieve or
  !    clear the error number.
  !***REFERENCES  R. E. Jones and D. K. Kahaner, XERROR, the SLATEC
  !             Error-handling Package, SAND82-0800, Sandia
  !             Laboratories, 1982.
  !***ROUTINES CALLED  FDUMP, J4SAVE, XERCNT, XERHLT, XERPRN, XERSVE
  !***REVISION HISTORY  (YYMMDD)
  !   880101  DATE WRITTEN
  !   880621  REVISED AS DIRECTED AT SLATEC CML MEETING OF FEBRUARY 1988.
  !       THERE ARE TWO BASIC CHANGES.
  !       1.  A NEW ROUTINE, XERPRN, IS USED INSTEAD OF XERPRT TO
  !           PRINT MESSAGES.  THIS ROUTINE WILL BREAK LONG MESSAGES
  !           INTO PIECES FOR PRINTING ON MULTIPLE LINES.  '$$' IS
  !           ACCEPTED AS A NEW LINE SENTINEL.  A PREFIX CAN BE
  !           ADDED TO EACH LINE TO BE PRINTED.  XERMSG USES EITHER
  !           ' ***' OR ' *  ' AND LONG MESSAGES ARE BROKEN EVERY
  !           72 CHARACTERS (AT MOST) SO THAT THE MAXIMUM LINE
  !           LENGTH OUTPUT CAN NOW BE AS GREAT AS 76.
  !       2.  THE TEXT OF ALL MESSAGES IS NOW IN UPPER CASE SINCE THE
  !           FORTRAN STANDARD DOCUMENT DOES NOT ADMIT THE EXISTENCE
  !           OF LOWER CASE.
  !   880708  REVISED AFTER THE SLATEC CML MEETING OF JUNE 29 AND 30.
  !       THE PRINCIPAL CHANGES ARE
  !       1.  CLARIFY COMMENTS IN THE PROLOGUES
  !       2.  RENAME XRPRNT TO XERPRN
  !       3.  REWORK HANDLING OF '$$' IN XERPRN TO HANDLE BLANK LINES
  !           SIMILAR TO THE WAY FORMAT STATEMENTS HANDLE THE /
  !           CHARACTER FOR NEW RECORDS.
  !   890706  REVISED WITH THE HELP OF FRED FRITSCH AND REG CLEMENS TO
  !       CLEAN UP THE CODING.
  !   890721  REVISED TO USE NEW FEATURE IN XERPRN TO COUNT CHARACTERS IN
  !       PREFIX.
  !   891013  REVISED TO CORRECT COMMENTS.
  !   891214  Prologue converted to Version 4.0 format.  (WRB)
  !   900510  Changed test on NERR to be -9999999 < NERR < 99999999, but
  !       NERR .ne. 0, and on LEVEL to be -2 < LEVEL < 3.  Added
  !       LEVEL=-1 logic, changed calls to XERSAV to XERSVE, and
  !       XERCTL to XERCNT.  (RWC)
  !   920501  Reformatted the REFERENCES section.  (WRB)
  !***END PROLOGUE  XERMSG
  CHARACTER(len=*) :: LIBRAR, SUBROU, MESSG
  CHARACTER(len=8) :: XLIBR, XSUBR
  CHARACTER(len=72) :: TEMP
  CHARACTER(len=20) :: LFIRST
  INTEGER :: NERR, LEVEL, LKNTRL
  INTEGER :: J4SAVE, MAXMES, KDUMMY, I, KOUNT, LERR, LLEVEL
  INTEGER :: MKNTRL, LTEMP
  !***FIRST EXECUTABLE STATEMENT  XERMSG
  LKNTRL = J4SAVE (2, 0, .FALSE.)
  MAXMES = J4SAVE (4, 0, .FALSE.)
  !
  !   LKNTRL IS A LOCAL COPY OF THE CONTROL FLAG KONTRL.
  !   MAXMES IS THE MAXIMUM NUMBER OF TIMES ANY PARTICULAR MESSAGE
  !      SHOULD BE PRINTED.
  !
  !   WE PRINT A FATAL ERROR MESSAGE AND TERMINATE FOR AN ERROR IN
  !      CALLING XERMSG.  THE ERROR NUMBER SHOULD BE POSITIVE,
  !      AND THE LEVEL SHOULD BE BETWEEN 0 AND 2.
  !
  IF (NERR.LT.-9999999 .OR. NERR.GT.99999999 .OR. NERR.EQ.0 .OR. &
        LEVEL.LT.-1 .OR. LEVEL.GT.2) THEN
     CALL XERPRN (' ***', -1, 'FATAL ERROR IN...$$ ' // &
           'XERMSG -- INVALID ERROR NUMBER OR LEVEL$$ '// &
           'JOB ABORT DUE TO FATAL ERROR.', 72)
     CALL XERSVE (' ', ' ', ' ', 0, 0, 0, KDUMMY)
     CALL XERHLT (' ***XERMSG -- INVALID INPUT')
     RETURN
  ENDIF
  !
  !   RECORD THE MESSAGE.
  !
  I = J4SAVE (1, NERR, .TRUE.)
  CALL XERSVE (LIBRAR, SUBROU, MESSG, 1, NERR, LEVEL, KOUNT)
  !
  !   HANDLE PRINT-ONCE WARNING MESSAGES.
  !
  IF (LEVEL.EQ.-1 .AND. KOUNT.GT.1) RETURN
  !
  !   ALLOW TEMPORARY USER OVERRIDE OF THE CONTROL FLAG.
  !
  XLIBR  = LIBRAR
  XSUBR  = SUBROU
  LFIRST = MESSG
  LERR   = NERR
  LLEVEL = LEVEL
  CALL XERCNT (XLIBR, XSUBR, LFIRST, LERR, LLEVEL, LKNTRL)
  !
  LKNTRL = MAX(-2, MIN(2,LKNTRL))
  MKNTRL = ABS(LKNTRL)
  !
  !   SKIP PRINTING IF THE CONTROL FLAG VALUE AS RESET IN XERCNT IS
  !   ZERO AND THE ERROR IS NOT FATAL.
  !
  IF (LEVEL.LT.2 .AND. LKNTRL.EQ.0) GO TO 30
  IF (LEVEL.EQ.0 .AND. KOUNT.GT.MAXMES) GO TO 30
  IF (LEVEL.EQ.1 .AND. KOUNT.GT.MAXMES .AND. MKNTRL.EQ.1) GO TO 30
  IF (LEVEL.EQ.2 .AND. KOUNT.GT.MAX(1,MAXMES)) GO TO 30
  !
  !   ANNOUNCE THE NAMES OF THE LIBRARY AND SUBROUTINE BY BUILDING A
  !   MESSAGE IN CHARACTER VARIABLE TEMP (NOT EXCEEDING 66 CHARACTERS)
  !   AND SENDING IT OUT VIA XERPRN.  PRINT ONLY IF CONTROL FLAG
  !   IS NOT ZERO.
  !
  IF (LKNTRL .NE. 0) THEN
     TEMP(1:21) = 'MESSAGE FROM ROUTINE '
     I = MIN(LEN(SUBROU), 16)
     TEMP(22:21+I) = SUBROU(1:I)
     TEMP(22+I:33+I) = ' IN LIBRARY '
     LTEMP = 33 + I
     I = MIN(LEN(LIBRAR), 16)
     TEMP(LTEMP+1:LTEMP+I) = LIBRAR (1:I)
     TEMP(LTEMP+I+1:LTEMP+I+1) = '.'
     LTEMP = LTEMP + I + 1
     CALL XERPRN (' ***', -1, TEMP(1:LTEMP), 72)
  ENDIF
  !
  !   IF LKNTRL IS POSITIVE, PRINT AN INTRODUCTORY LINE BEFORE
  !   PRINTING THE MESSAGE.  THE INTRODUCTORY LINE TELLS THE CHOICE
  !   FROM EACH OF THE FOLLOWING THREE OPTIONS.
  !   1.  LEVEL OF THE MESSAGE
  !          'INFORMATIVE MESSAGE'
  !          'POTENTIALLY RECOVERABLE ERROR'
  !          'FATAL ERROR'
  !   2.  WHETHER CONTROL FLAG WILL ALLOW PROGRAM TO CONTINUE
  !          'PROG CONTINUES'
  !          'PROG ABORTED'
  !   3.  WHETHER OR NOT A TRACEBACK WAS REQUESTED.  (THE TRACEBACK
  !       MAY NOT BE IMPLEMENTED AT SOME SITES, SO THIS ONLY TELLS
  !       WHAT WAS REQUESTED, NOT WHAT WAS DELIVERED.)
  !          'TRACEBACK REQUESTED'
  !          'TRACEBACK NOT REQUESTED'
  !   NOTICE THAT THE LINE INCLUDING FOUR PREFIX CHARACTERS WILL NOT
  !   EXCEED 74 CHARACTERS.
  !   WE SKIP THE NEXT BLOCK IF THE INTRODUCTORY LINE IS NOT NEEDED.
  !
  IF (LKNTRL .GT. 0) THEN
  !
  !   THE FIRST PART OF THE MESSAGE TELLS ABOUT THE LEVEL.
  !
     IF (LEVEL .LE. 0) THEN
        TEMP(1:20) = 'INFORMATIVE MESSAGE,'
        LTEMP = 20
     ELSEIF (LEVEL .EQ. 1) THEN
        TEMP(1:30) = 'POTENTIALLY RECOVERABLE ERROR,'
        LTEMP = 30
     ELSE
        TEMP(1:12) = 'FATAL ERROR,'
        LTEMP = 12
     ENDIF
  !
  !   THEN WHETHER THE PROGRAM WILL CONTINUE.
  !
     IF ((MKNTRL.EQ.2 .AND. LEVEL.GE.1) .OR. &
           (MKNTRL.EQ.1 .AND. LEVEL.EQ.2)) THEN
        TEMP(LTEMP+1:LTEMP+14) = ' PROG ABORTED,'
        LTEMP = LTEMP + 14
     ELSE
        TEMP(LTEMP+1:LTEMP+16) = ' PROG CONTINUES,'
        LTEMP = LTEMP + 16
     ENDIF
  !
  !   FINALLY TELL WHETHER THERE SHOULD BE A TRACEBACK.
  !
     IF (LKNTRL .GT. 0) THEN
        TEMP(LTEMP+1:LTEMP+20) = ' TRACEBACK REQUESTED'
        LTEMP = LTEMP + 20
     ELSE
        TEMP(LTEMP+1:LTEMP+24) = ' TRACEBACK NOT REQUESTED'
        LTEMP = LTEMP + 24
     ENDIF
     CALL XERPRN (' ***', -1, TEMP(1:LTEMP), 72)
  ENDIF
  !
  !   NOW SEND OUT THE MESSAGE.
  !
  CALL XERPRN (' *  ', -1, MESSG, 72)
  !
  !   IF LKNTRL IS POSITIVE, WRITE THE ERROR NUMBER AND REQUEST A
  !      TRACEBACK.
  !
  IF (LKNTRL .GT. 0) THEN
     WRITE (TEMP, '(''ERROR NUMBER = '', I8)') NERR
     DO I=16,22
        IF (TEMP(I:I) .NE. ' ') GO TO 20
     END DO
  !
   20   CALL XERPRN (' *  ', -1, TEMP(1:15) // TEMP(I:23), 72)
     CALL FDUMP
  ENDIF
  !
  !   IF LKNTRL IS NOT ZERO, PRINT A BLANK LINE AND AN END OF MESSAGE.
  !
  IF (LKNTRL .NE. 0) THEN
     CALL XERPRN (' *  ', -1, ' ', 72)
     CALL XERPRN (' ***', -1, 'END OF MESSAGE', 72)
     CALL XERPRN ('    ',  0, ' ', 72)
  ENDIF
  !
  !   IF THE ERROR IS NOT FATAL OR THE ERROR IS RECOVERABLE AND THE
  !   CONTROL FLAG IS SET FOR RECOVERY, THEN RETURN.
  !
   30   IF (LEVEL.LE.0 .OR. (LEVEL.EQ.1 .AND. MKNTRL.LE.1)) RETURN
  !
  !   THE PROGRAM WILL BE STOPPED DUE TO AN UNRECOVERED ERROR OR A
  !   FATAL ERROR.  PRINT THE REASON FOR THE ABORT AND THE ERROR
  !   SUMMARY IF THE CONTROL FLAG AND THE MAXIMUM ERROR COUNT PERMIT.
  !
  IF (LKNTRL.GT.0 .AND. KOUNT.LT.MAX(1,MAXMES)) THEN
     IF (LEVEL .EQ. 1) THEN
        CALL XERPRN &
              (' ***', -1, 'JOB ABORT DUE TO UNRECOVERED ERROR.', 72)
     ELSE
        CALL XERPRN(' ***', -1, 'JOB ABORT DUE TO FATAL ERROR.', 72)
     ENDIF
     CALL XERSVE (' ', ' ', ' ', -1, 0, 0, KDUMMY)
     CALL XERHLT (' ')
  ELSE
     CALL XERHLT (MESSG)
  ENDIF
  RETURN
END SUBROUTINE XERMSG