Context Navigation

physiq_mod.F90 @ 5452

Last change on this file since 5452 was 5203, checked in by Laurent Fairhead, 4 months ago
Merge with trunk revision 5202 before reintegration to trunk
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Id`
File size: 214.2 KB

Rev	Line
[5202]	1
[1279]	2	! $Id: physiq_mod.F90 5203 2024-09-20 11:10:18Z aborella $
[2418]	3	!
[1862]	4	!#define IO_DEBUG
[2418]	5	MODULE physiq_mod
[766]	6
[2469]	7	IMPLICIT NONE
[2418]	8
	9	CONTAINS
	10
[2469]	11	SUBROUTINE physiq (nlon,nlev, &
	12	debut,lafin,pdtphys_, &
	13	paprs,pplay,pphi,pphis,presnivs, &
	14	u,v,rot,t,qx, &
	15	flxmass_w, &
	16	d_u, d_v, d_t, d_qx, d_ps)
[524]	17
[3776]	18	! For clarity, the "USE" section is now arranged in alphabetical order,
	19	! with a separate section for CPP keys
	20	! PLEASE try to follow this rule
	21
	22	USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando
	23	USE aero_mod
	24	USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	25	& fl_ebil, fl_cor_ebil
[3387]	26	USE assert_m, only: assert
[3776]	27	USE change_srf_frac_mod
	28	USE conf_phys_m, only: conf_phys
	29	USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad
	30	USE CFMIP_point_locations ! IM stations CFMIP
	31	USE cmp_seri_mod
	32	USE dimphy
	33	USE etat0_limit_unstruct_mod
	34	USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando
	35	USE fonte_neige_mod, ONLY : fonte_neige_get_vars
[4367]	36	USE geometry_mod, ONLY: cell_area, latitude_deg, longitude_deg
[2469]	37	USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, &
	38	histwrite, ju2ymds, ymds2ju, getin
[3776]	39	USE ioipsl_getin_p_mod, ONLY : getin_p
	40	USE indice_sol_mod
[5203]	41	USE infotrac_phy, ONLY: nqtot, nbtr, nqo, tracers, type_trac, addPhase
[4056]	42	USE strings_mod, ONLY: strIdx
[3776]	43	USE iophy
	44	USE limit_read_mod, ONLY : init_limit_read
[3435]	45	USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured
[3776]	46	USE mod_phys_lmdz_mpi_data, only: is_mpi_root
[2469]	47	USE mod_phys_lmdz_para
[3776]	48	USE netcdf95, only: nf95_close
	49	USE netcdf, only: nf90_fill_real ! IM for NMC files
	50	USE open_climoz_m, only: open_climoz ! ozone climatology from a file
	51	USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer
	52	USE pbl_surface_mod, ONLY : pbl_surface
	53	USE phyaqua_mod, only: zenang_an
[4358]	54	USE phyetat0_mod, only: phyetat0
[3776]	55	USE phystokenc_mod, ONLY: offline, phystokenc
	56	USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, &
[4127]	57	year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour, calend
[3776]	58	!! USE phys_local_var_mod, ONLY : a long list of variables
	59	!! ==> see below, after "CPP Keys" section
	60	USE phys_state_var_mod ! Variables sauvegardees de la physique
	61	USE phys_output_mod
	62	USE phys_output_ctrlout_mod
[3981]	63	USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level, &
	64	alert_first_call, call_alert, prt_alerte
[3776]	65	USE readaerosol_mod, ONLY : init_aero_fromfile
	66	USE readaerosolstrato_m, ONLY : init_readaerosolstrato
	67	USE radlwsw_m, only: radlwsw
	68	USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz
	69	USE regr_pr_time_av_m, only: regr_pr_time_av
[4367]	70	USE surface_data, ONLY : type_ocean, ok_veget
	71	USE time_phylmdz_mod, only: current_time, itau_phy, pdtphys, raz_date, update_time
[3776]	72	USE tracinca_mod, ONLY: config_inca
[2788]	73	USE tropopause_m, ONLY: dyn_tropopause
[3776]	74	USE vampir
	75	USE write_field_phy
[4236]	76	USE wxios, ONLY: g_ctx, wxios_set_context
[4664]	77	USE lmdz_lscp, ONLY : lscp
[4715]	78	USE lmdz_call_cloud_optics_prop, ONLY : call_cloud_optics_prop
[4664]	79	USE lmdz_lscp_old, ONLY : fisrtilp
[4724]	80	USE lmdz_call_blowing_snow, ONLY : call_blowing_snow_sublim_sedim
[4588]	81	USE lmdz_wake_ini, ONLY : wake_ini
[4448]	82	USE yamada_ini_mod, ONLY : yamada_ini
[4687]	83	USE lmdz_atke_turbulence_ini, ONLY : atke_ini
[4690]	84	USE lmdz_thermcell_ini, ONLY : thermcell_ini, iflag_thermals_tenv
[4590]	85	USE lmdz_thermcell_dtke, ONLY : thermcell_dtke
[4724]	86	USE lmdz_blowing_snow_ini, ONLY : blowing_snow_ini , qbst_bs
[4664]	87	USE lmdz_lscp_ini, ONLY : lscp_ini
[4613]	88	USE lmdz_ratqs_main, ONLY : ratqs_main
	89	USE lmdz_ratqs_ini, ONLY : ratqs_ini
[4692]	90	USE lmdz_cloud_optics_prop_ini, ONLY : cloud_optics_prop_ini
[4651]	91	USE phys_output_var_mod, ONLY : cloudth_sth,cloudth_senv,cloudth_sigmath,cloudth_sigmaenv
[4773]	92	USE phys_output_var_mod, ONLY : cloud_cover_sw, cloud_cover_sw_s2
[3776]	93
[4651]	94
[3776]	95	!USE cmp_seri_mod
	96	! USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	97	! & fl_ebil, fl_cor_ebil
	98
	99	!!!!!!!!!!!!!!!!!! "USE" section for CPP keys !!!!!!!!!!!!!!!!!!!!!!!!
	100	!
	101	!
[2630]	102	#ifdef CPP_Dust
[3776]	103	USE phytracr_spl_mod, ONLY: phytracr_spl, phytracr_spl_out_init
	104	USE phys_output_write_spl_mod
	105	#else
	106	USE phytrac_mod, ONLY : phytrac_init, phytrac
	107	USE phys_output_write_mod
[2630]	108	#endif
[3776]	109
	110
[4367]	111	#ifdef INCA
	112	USE geometry_mod, ONLY: longitude, latitude, boundslon, boundslat, ind_cell_glo
	113	USE time_phylmdz_mod, ONLY: ndays
	114	USE infotrac_phy, ONLY: nqCO2
	115	#endif
[3776]	116	#ifdef REPROBUS
[4367]	117	USE chem_rep, ONLY: Init_chem_rep_xjour, d_q_rep, d_ql_rep, d_qi_rep, &
	118	ptrop, ttrop, ztrop, gravit, itroprep, Z1, Z2, fac, B
[4636]	119	USE strataer_local_var_mod
	120	USE strataer_emiss_mod, ONLY: strataer_emiss_init
[3776]	121	#endif
[4367]	122	#if defined INCA \|\| defined REPROBUS
	123	USE time_phylmdz_mod, ONLY: annee_ref, day_ini, day_ref, start_time
	124	USE vertical_layers_mod, ONLY: aps, bps, ap, bp
	125	#endif
[3776]	126
	127
	128	#ifdef CPP_RRTM
	129	USE YOERAD, ONLY : NRADLP
[4367]	130	! USE YOESW, ONLY : RSUN
[3776]	131	#endif
	132
	133
[3522]	134	#ifdef CPP_StratAer
[4601]	135	USE phys_local_var_mod, ONLY: d_q_emiss
	136	USE strataer_local_var_mod
	137	USE strataer_nuc_mod, ONLY: strataer_nuc_init
	138	USE strataer_emiss_mod, ONLY: strataer_emiss_init
[3522]	139	#endif
[3776]	140
[4619]	141	USE lmdz_xios, ONLY: xios_update_calendar, xios_context_finalize
	142	USE lmdz_xios, ONLY: xios_get_field_attr, xios_field_is_active, xios_context
	143	USE lmdz_xios, ONLY: xios_set_current_context
	144	USE wxios, ONLY: missing_val, using_xios
[3776]	145
	146	#ifndef CPP_XIOS
	147	USE paramLMDZ_phy_mod
	148	#endif
	149	!
	150	!
	151	!!!!!!!!!!!!!!!!!! END "USE" for CPP keys !!!!!!!!!!!!!!!!!!!!!!
	152
[4537]	153	USE physiqex_mod, ONLY : physiqex
[3776]	154	USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, &
[2606]	155	! [Variables internes non sauvegardees de la physique]
	156	! Variables locales pour effectuer les appels en serie
[4951]	157	t_seri,q_seri,ql_seri,qs_seri,qbs_seri, &
	158	u_seri,v_seri,cf_seri,rvc_seri,tr_seri, &
[4489]	159	rhcl, &
[2606]	160	! Dynamic tendencies (diagnostics)
[4951]	161	d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_qbs_dyn, &
	162	d_u_dyn,d_v_dyn,d_cf_dyn,d_rvc_dyn,d_tr_dyn, &
[4523]	163	d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d,d_qbs_dyn2d, &
[2606]	164	! Physic tendencies
[4742]	165	d_t_con,d_q_con,d_q_con_zmasse,d_u_con,d_v_con, &
[2606]	166	d_tr, & !! to be removed?? (jyg)
	167	d_t_wake,d_q_wake, &
	168	d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, &
	169	d_t_ajsb,d_q_ajsb, &
	170	d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, &
[4367]	171	! d_t_ajs_w,d_q_ajs_w, &
	172	! d_t_ajs_x,d_q_ajs_x, &
[2606]	173	!
[2705]	174	d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, &
[2606]	175	d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, &
	176	d_t_lscst,d_q_lscst, &
	177	d_t_lscth,d_q_lscth, &
	178	plul_st,plul_th, &
	179	!
[4523]	180	d_t_vdf,d_q_vdf, d_qbs_vdf, d_u_vdf,d_v_vdf,d_t_diss, &
[4056]	181	d_t_vdf_x, d_t_vdf_w, &
	182	d_q_vdf_x, d_q_vdf_w, &
[2606]	183	d_ts, &
	184	!
[5202]	185	d_t_bsss,d_q_bsss,d_qbs_bsss, &
[4523]	186	!
[4367]	187	! d_t_oli,d_u_oli,d_v_oli, &
[2606]	188	d_t_oro,d_u_oro,d_v_oro, &
[2897]	189	d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, &
[2606]	190	d_t_lif,d_u_lif,d_v_lif, &
	191	d_t_ec, &
	192	!
	193	du_gwd_hines,dv_gwd_hines,d_t_hin, &
	194	dv_gwd_rando,dv_gwd_front, &
	195	east_gwstress,west_gwstress, &
	196	d_q_ch4, &
[4803]	197	! proprecip
[4830]	198	qraindiag, qsnowdiag, &
[4803]	199	dqreva, dqssub, &
	200	dqrauto,dqrcol,dqrmelt,dqrfreez, &
	201	dqsauto,dqsagg,dqsrim,dqsmelt,dqsfreez, &
[2606]	202	! Special RRTM
	203	ZLWFT0_i,ZSWFT0_i,ZFLDN0, &
	204	ZFLUP0,ZFSDN0,ZFSUP0, &
	205	!
	206	topswad_aero,solswad_aero, &
	207	topswai_aero,solswai_aero, &
	208	topswad0_aero,solswad0_aero, &
	209	!LW additional
	210	toplwad_aero,sollwad_aero, &
	211	toplwai_aero,sollwai_aero, &
	212	toplwad0_aero,sollwad0_aero, &
[4677]	213	!pour Ecrad
	214	topswad_aero_s2, solswad_aero_s2, &
	215	topswai_aero_s2, solswai_aero_s2, &
	216	topswad0_aero_s2, solswad0_aero_s2, &
	217	topsw_aero_s2, topsw0_aero_s2, &
	218	solsw_aero_s2, solsw0_aero_s2, &
	219	topswcf_aero_s2, solswcf_aero_s2, &
	220	!LW diagnostics
	221	toplwad_aero_s2, sollwad_aero_s2, &
	222	toplwai_aero_s2, sollwai_aero_s2, &
	223	toplwad0_aero_s2, sollwad0_aero_s2, &
[2606]	224	!
	225	topsw_aero,solsw_aero, &
	226	topsw0_aero,solsw0_aero, &
	227	topswcf_aero,solswcf_aero, &
	228	tausum_aero,tau3d_aero, &
[2854]	229	drytausum_aero, &
[2606]	230	!
	231	!variables CFMIP2/CMIP5
	232	topswad_aerop, solswad_aerop, &
	233	topswai_aerop, solswai_aerop, &
	234	topswad0_aerop, solswad0_aerop, &
	235	topsw_aerop, topsw0_aerop, &
	236	solsw_aerop, solsw0_aerop, &
	237	topswcf_aerop, solswcf_aerop, &
	238	!LW diagnostics
	239	toplwad_aerop, sollwad_aerop, &
	240	toplwai_aerop, sollwai_aerop, &
	241	toplwad0_aerop, sollwad0_aerop, &
[4677]	242	!pour Ecrad
	243	topswad_aero_s2, solswad_aero_s2, &
	244	topswai_aero_s2, solswai_aero_s2, &
	245	topswad0_aero_s2, solswad0_aero_s2, &
	246	topsw_aero_s2, topsw0_aero_s2, &
	247	solsw_aero_s2, solsw0_aero_s2, &
	248	topswcf_aero_s2, solswcf_aero_s2, &
	249	!LW diagnostics
	250	toplwad_aero_s2, sollwad_aero_s2, &
	251	toplwai_aero_s2, sollwai_aero_s2, &
	252	toplwad0_aero_s2, sollwad0_aero_s2, &
[2606]	253	!
	254	ptstar, pt0, slp, &
	255	!
	256	bils, &
	257	!
	258	cldh, cldl,cldm, cldq, cldt, &
	259	JrNt, &
[4523]	260	dthmin, evap, snowerosion,fder, plcl, plfc, &
[4887]	261	prw, prlw, prsw, prbsw, water_budget, &
[2606]	262	s_lcl, s_pblh, s_pblt, s_therm, &
	263	cdragm, cdragh, &
	264	zustar, zu10m, zv10m, rh2m, qsat2m, &
[3817]	265	zq2m, zt2m, zn2mout, weak_inversion, &
[2606]	266	zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h
	267	t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h
	268	!
	269	s_pblh_x, s_pblh_w, &
	270	s_lcl_x, s_lcl_w, &
	271	!
	272	slab_wfbils, tpot, tpote, &
	273	ue, uq, ve, vq, zxffonte, &
[3257]	274	uwat, vwat, &
[2606]	275	zxfqcalving, zxfluxlat, &
	276	zxrunofflic, &
	277	zxtsol, snow_lsc, zxfqfonte, zxqsurf, &
[3888]	278	delta_qsurf, &
[2606]	279	rain_lsc, rain_num, &
	280	!
	281	sens_x, sens_w, &
	282	zxfluxlat_x, zxfluxlat_w, &
	283	!
[4881]	284	pbl_tke_input, pbl_eps, l_mix, wprime,&
[2606]	285	t_therm, q_therm, u_therm, v_therm, &
	286	cdragh_x, cdragh_w, &
	287	cdragm_x, cdragm_w, &
	288	kh, kh_x, kh_w, &
	289	!
[2730]	290	wake_k, &
[3080]	291	alp_wake, &
[2635]	292	wake_h, wake_omg, &
	293	! tendencies of delta T and delta q:
	294	d_deltat_wk, d_deltaq_wk, & ! due to wakes
	295	d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves
	296	d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion
	297	d_deltat_the, d_deltaq_the, & ! due to thermals
	298	d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection
	299	! tendencies of wake fractional area and wake number per unit area:
[4744]	300	d_s_wk, d_s_a_wk, d_dens_wk, d_dens_a_wk, & ! due to wakes
[3208]	301	!!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion
	302	!!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals
[2635]	303	!
[3148]	304	ptconv, ratqsc, &
[2824]	305	wbeff, convoccur, zmax_th, &
[2606]	306	sens, flwp, fiwp, &
[3080]	307	alp_bl_conv,alp_bl_det, &
[2606]	308	alp_bl_fluct_m,alp_bl_fluct_tke, &
[4843]	309	alp_bl_stat, n2, s2, strig, zcong, zlcl_th, &
[2606]	310	proba_notrig, random_notrig, &
[3956]	311	!! cv_gen, & !moved to phys_state_var_mod
[2606]	312	!
[3134]	313	dnwd0, &
	314	omega, &
[2606]	315	epmax_diag, &
[3134]	316	! Deep convective variables used in phytrac
	317	pmflxr, pmflxs, &
[3496]	318	wdtrainA, wdtrainS, wdtrainM, &
[3134]	319	upwd, dnwd, &
[2606]	320	ep, &
[3134]	321	da, mp, &
	322	phi, &
	323	wght_cvfd, &
	324	phi2, &
	325	d1a, dam, &
	326	ev, &
	327	elij, &
[3496]	328	qtaa, &
[3134]	329	clw, &
	330	epmlmMm, eplaMm, &
	331	sij, &
[3387]	332	!
[4380]	333	rneblsvol, &
[5202]	334	pfraclr, pfracld, cldfraliq, sigma2_icefracturb, mean_icefracturb, &
	335	distcltop, temp_cltop, &
[4951]	336	!-- LSCP - condensation and ice supersaturation variables
	337	qsub, qissr, qcld, subfra, issrfra, gamma_cond, ratio_qi_qtot, &
	338	dcf_sub, dcf_con, dcf_mix, dqi_adj, dqi_sub, dqi_con, dqi_mix, &
	339	dqvc_adj, dqvc_sub, dqvc_con, dqvc_mix, qsatliq, qsatice, &
	340	!-- LSCP - aviation and contrails variables
[4380]	341	Tcontr, qcontr, qcontr2, fcontrN, fcontrP, &
[4951]	342	dcf_avi, dqi_avi, dqvc_avi, flight_dist, flight_h2o, &
	343	!
[2606]	344	cldemi, &
	345	cldfra, cldtau, fiwc, &
	346	fl, re, flwc, &
	347	ref_liq, ref_ice, theta, &
	348	ref_liq_pi, ref_ice_pi, &
[3780]	349	zphi, zx_rh, zx_rhl, zx_rhi, &
[2606]	350	pmfd, pmfu, &
	351	!
	352	t2m, fluxlat, &
	353	fsollw, evap_pot, &
[4737]	354	fsolsw, wfbils, wfevap, &
[4523]	355	prfl, psfl,bsfl, fraca, Vprecip, &
[2606]	356	zw2, &
[3387]	357	!
[2606]	358	fluxu, fluxv, &
	359	fluxt, &
[3387]	360	!
[2606]	361	uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h
	362	wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h
	363	qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h
[3387]	364	!
[2606]	365	beta_prec, &
	366	rneb, &
[4575]	367	zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic, &
	368	zxfluxt,zxfluxq
[2606]	369	!
[4703]	370	USE phys_local_var_mod, ONLY: zfice, dNovrN, ptconv
	371	USE phys_output_var_mod, ONLY: scdnc, cldncl, reffclwtop, lcc, reffclws, &
	372	reffclwc, cldnvi, lcc3d, lcc3dcon, lcc3dstra, icc3dcon, icc3dstra
[4692]	373	USE output_physiqex_mod, ONLY: output_physiqex
[2630]	374
[4547]	375
[3387]	376	IMPLICIT NONE
[2469]	377	!>======================================================================
	378	!!
	379	!! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
	380	!!
	381	!! Objet: Moniteur general de la physique du modele
	382	!!AA Modifications quant aux traceurs :
	383	!!AA - uniformisation des parametrisations ds phytrac
	384	!!AA - stockage des moyennes des champs necessaires
	385	!!AA en mode traceur off-line
	386	!!======================================================================
	387	!! CLEFS CPP POUR LES IO
	388	!! =====================
[1352]	389	#define histNMC
[2469]	390	!!======================================================================
	391	!! modif ( P. Le Van , 12/10/98 )
	392	!!
	393	!! Arguments:
	394	!!
	395	!! nlon----input-I-nombre de points horizontaux
	396	!! nlev----input-I-nombre de couches verticales, doit etre egale a klev
	397	!! debut---input-L-variable logique indiquant le premier passage
	398	!! lafin---input-L-variable logique indiquant le dernier passage
	399	!! jD_cur -R-jour courant a l'appel de la physique (jour julien)
	400	!! jH_cur -R-heure courante a l'appel de la physique (jour julien)
	401	!! pdtphys-input-R-pas d'integration pour la physique (seconde)
	402	!! paprs---input-R-pression pour chaque inter-couche (en Pa)
	403	!! pplay---input-R-pression pour le mileu de chaque couche (en Pa)
	404	!! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol)
	405	!! pphis---input-R-geopotentiel du sol
	406	!! presnivs-input_R_pressions approximat. des milieux couches ( en PA)
	407	!! u-------input-R-vitesse dans la direction X (de O a E) en m/s
	408	!! v-------input-R-vitesse Y (de S a N) en m/s
	409	!! t-------input-R-temperature (K)
	410	!! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs
	411	!! d_t_dyn-input-R-tendance dynamique pour "t" (K/s)
	412	!! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s)
[2496]	413	!! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s)
	414	!! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s)
[2469]	415	!! flxmass_w -input-R- flux de masse verticale
	416	!! d_u-----output-R-tendance physique de "u" (m/s/s)
	417	!! d_v-----output-R-tendance physique de "v" (m/s/s)
	418	!! d_t-----output-R-tendance physique de "t" (K/s)
	419	!! d_qx----output-R-tendance physique de "qx" (kg/kg/s)
	420	!! d_ps----output-R-tendance physique de la pression au sol
	421	!!======================================================================
	422	integer jjmp1
	423	! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1))
	424	! integer iip1
	425	! parameter (iip1=iim+1)
[782]	426
[2469]	427	include "regdim.h"
	428	include "dimsoil.h"
	429	include "clesphys.h"
[4089]	430	include "alpale.h"
[3011]	431	include "dimpft.h"
[2469]	432	!======================================================================
[3479]	433	LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques
[3600]	434	!$OMP THREADPRIVATE(ok_volcan)
[4056]	435	INTEGER, SAVE :: flag_volc_surfstrat ! pour imposer le cool/heat rate à la surf/strato
[3989]	436	!$OMP THREADPRIVATE(flag_volc_surfstrat)
[2469]	437	LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE
	438	PARAMETER (ok_cvl=.TRUE.)
	439	LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface
	440	PARAMETER (ok_gust=.FALSE.)
[3600]	441	INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL)
[2469]	442	!$OMP THREADPRIVATE(iflag_radia)
	443	!======================================================================
	444	LOGICAL check ! Verifier la conservation du modele en eau
	445	PARAMETER (check=.FALSE.)
	446	LOGICAL ok_stratus ! Ajouter artificiellement les stratus
	447	PARAMETER (ok_stratus=.FALSE.)
	448	!======================================================================
	449	REAL amn, amx
	450	INTEGER igout
	451	!======================================================================
[3317]	452	! Clef iflag_cycle_diurne controlant l'activation du cycle diurne:
[2469]	453	! en attente du codage des cles par Fred
[3317]	454	! iflag_cycle_diurne est initialise par conf_phys et se trouve
	455	! dans clesphys.h (IM)
[2469]	456	!======================================================================
	457	! Modele thermique du sol, a activer pour le cycle diurne:
	458	!cc LOGICAL soil_model
	459	!cc PARAMETER (soil_model=.FALSE.)
	460	!======================================================================
	461	! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans
	462	! le calcul du rayonnement est celle apres la precipitation des nuages.
	463	! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre
	464	! la condensation et la precipitation. Cette cle augmente les impacts
	465	! radiatifs des nuages.
	466	!cc LOGICAL new_oliq
	467	!cc PARAMETER (new_oliq=.FALSE.)
	468	!======================================================================
	469	! Clefs controlant deux parametrisations de l'orographie:
	470	!c LOGICAL ok_orodr
	471	!cc PARAMETER (ok_orodr=.FALSE.)
	472	!cc LOGICAL ok_orolf
	473	!cc PARAMETER (ok_orolf=.FALSE.)
	474	!======================================================================
	475	LOGICAL ok_journe ! sortir le fichier journalier
[3461]	476	SAVE ok_journe
[2469]	477	!$OMP THREADPRIVATE(ok_journe)
	478	!
	479	LOGICAL ok_mensuel ! sortir le fichier mensuel
[3461]	480	SAVE ok_mensuel
[2469]	481	!$OMP THREADPRIVATE(ok_mensuel)
	482	!
	483	LOGICAL ok_instan ! sortir le fichier instantane
[3461]	484	SAVE ok_instan
[2469]	485	!$OMP THREADPRIVATE(ok_instan)
	486	!
	487	LOGICAL ok_LES ! sortir le fichier LES
[3461]	488	SAVE ok_LES
[2469]	489	!$OMP THREADPRIVATE(ok_LES)
	490	!
	491	LOGICAL callstats ! sortir le fichier stats
[3461]	492	SAVE callstats
[2469]	493	!$OMP THREADPRIVATE(callstats)
	494	!
	495	LOGICAL ok_region ! sortir le fichier regional
	496	PARAMETER (ok_region=.FALSE.)
	497	!======================================================================
[3461]	498	REAL seuil_inversion
	499	SAVE seuil_inversion
[2469]	500	!$OMP THREADPRIVATE(seuil_inversion)
[4613]	501
	502
	503
[2469]	504	real facteur
[1507]	505
[2469]	506	REAL wmax_th(klon)
	507	REAL tau_overturning_th(klon)
[878]	508
[3461]	509	INTEGER lmax_th(klon)
	510	INTEGER limbas(klon)
	511	REAL ratqscth(klon,klev)
	512	REAL ratqsdiff(klon,klev)
	513	REAL zqsatth(klon,klev)
[878]	514
[2469]	515	!======================================================================
	516	!
[4523]	517	! indices de traceurs eau vapeur, liquide, glace, fraction nuageuse LS (optional), blowing snow (optional)
[4951]	518	INTEGER,SAVE :: ivap, iliq, isol, ibs, icf, irvc
	519	!$OMP THREADPRIVATE(ivap, iliq, isol, ibs, icf, irvc)
[2469]	520	!
	521	!
	522	! Variables argument:
	523	!
	524	INTEGER nlon
	525	INTEGER nlev
	526	REAL,INTENT(IN) :: pdtphys_
	527	! NB: pdtphys to be used in physics is in time_phylmdz_mod
	528	LOGICAL debut, lafin
	529	REAL paprs(klon,klev+1)
	530	REAL pplay(klon,klev)
	531	REAL pphi(klon,klev)
	532	REAL pphis(klon)
	533	REAL presnivs(klev)
[2799]	534	!JLD REAL znivsig(klev)
	535	!JLD real pir
[719]	536
[2469]	537	REAL u(klon,klev)
	538	REAL v(klon,klev)
[2333]	539
[2469]	540	REAL, intent(in):: rot(klon, klev)
	541	! relative vorticity, in s-1, needed for frontal waves
[2333]	542
[2469]	543	REAL t(klon,klev),thetal(klon,klev)
	544	! thetal: ligne suivante a decommenter si vous avez les fichiers
	545	! MPL 20130625
	546	! fth_fonctions.F90 et parkind1.F90
	547	! sinon thetal=theta
	548	! REAL fth_thetae,fth_thetav,fth_thetal
	549	REAL qx(klon,klev,nqtot)
	550	REAL flxmass_w(klon,klev)
	551	REAL d_u(klon,klev)
	552	REAL d_v(klon,klev)
	553	REAL d_t(klon,klev)
	554	REAL d_qx(klon,klev,nqtot)
	555	REAL d_ps(klon)
[2897]	556	! variables pour tend_to_tke
	557	REAL duadd(klon,klev)
	558	REAL dvadd(klon,klev)
	559	REAL dtadd(klon,klev)
	560
[3134]	561	!! Variables moved to phys_local_var_mod
	562	!! ! Variables pour le transport convectif
	563	!! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev)
	564	!! real wght_cvfd(klon,klev)
	565	!! ! Variables pour le lessivage convectif
	566	!! ! RomP >>>
	567	!! real phi2(klon,klev,klev)
	568	!! real d1a(klon,klev),dam(klon,klev)
	569	!! real ev(klon,klev)
	570	!! real clw(klon,klev),elij(klon,klev,klev)
	571	!! real epmlmMm(klon,klev,klev),eplaMm(klon,klev)
	572	!! ! RomP <<<
[2469]	573	!IM definition dynamique o_trac dans phys_output_open
	574	! type(ctrl_out) :: o_trac(nqtot)
[524]	575
[2469]	576	! variables a une pression donnee
	577	!
	578	include "declare_STDlev.h"
	579	!
	580	!
[4707]	581	include "radepsi.h"
[2469]	582	include "radopt.h"
	583	!
	584	!
	585	INTEGER n
	586	!ym INTEGER npoints
	587	!ym PARAMETER(npoints=klon)
	588	!
	589	INTEGER nregISCtot
	590	PARAMETER(nregISCtot=1)
	591	!
	592	! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties
	593	! sur 1 region rectangulaire y compris pour 1 point
	594	! imin_debut : indice minimum de i; nbpti : nombre de points en
	595	! direction i (longitude)
	596	! jmin_debut : indice minimum de j; nbptj : nombre de points en
	597	! direction j (latitude)
[2799]	598	!JLD INTEGER imin_debut, nbpti
	599	!JLD INTEGER jmin_debut, nbptj
[2469]	600	!IM: region='3d' <==> sorties en global
	601	CHARACTER*3 region
	602	PARAMETER(region='3d')
[3461]	603	LOGICAL ok_hf
[2469]	604	!
[3461]	605	SAVE ok_hf
[2469]	606	!$OMP THREADPRIVATE(ok_hf)
[524]	607
[3461]	608	INTEGER, PARAMETER :: longcles=20
	609	REAL, SAVE :: clesphy0(longcles)
[2469]	610	!$OMP THREADPRIVATE(clesphy0)
	611	!
	612	! Variables propres a la physique
[3461]	613	INTEGER, SAVE :: itap ! compteur pour la physique
[2469]	614	!$OMP THREADPRIVATE(itap)
[2235]	615
[2469]	616	INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys
	617	!$OMP THREADPRIVATE(abortphy)
	618	!
[3461]	619	REAL,SAVE :: solarlong0
[2469]	620	!$OMP THREADPRIVATE(solarlong0)
[987]	621
[2469]	622	!
	623	! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM):
	624	!
	625	!IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon)
	626	REAL zulow(klon),zvlow(klon)
	627	!
	628	INTEGER igwd,idx(klon),itest(klon)
	629	!
	630	! REAL,allocatable,save :: run_off_lic_0(:)
	631	! !$OMP THREADPRIVATE(run_off_lic_0)
	632	!ym SAVE run_off_lic_0
	633	!KE43
	634	! Variables liees a la convection de K. Emanuel (sb):
	635	!
[3461]	636	REAL, SAVE :: bas, top ! cloud base and top levels
[2469]	637	!$OMP THREADPRIVATE(bas, top)
	638	!------------------------------------------------------------------
	639	! Upmost level reached by deep convection and related variable (jyg)
	640	!
[4367]	641	! INTEGER izero
[2469]	642	INTEGER k_upper_cv
	643	!------------------------------------------------------------------
[3153]	644	! Compteur de l'occurence de cvpas=1
	645	INTEGER Ncvpaseq1
	646	SAVE Ncvpaseq1
	647	!$OMP THREADPRIVATE(Ncvpaseq1)
[2469]	648	!
	649	!==========================================================================
	650	!CR04.12.07: on ajoute les nouvelles variables du nouveau schema
	651	!de convection avec poches froides
	652	! Variables li\'ees \`a la poche froide (jyg)
[879]	653
[3496]	654	!! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level
	655	!! Moved to phys_state_var_mod
[2469]	656	!
	657	REAL wape_prescr, fip_prescr
	658	INTEGER it_wape_prescr
	659	SAVE wape_prescr, fip_prescr, it_wape_prescr
	660	!$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr)
	661	!
	662	! variables supplementaires de concvl
	663	REAL Tconv(klon,klev)
[3134]	664	!! variable moved to phys_local_var_mod
	665	!! REAL sij(klon,klev,klev)
[2812]	666	!! !
	667	!! ! variables pour tester la conservation de l'energie dans concvl
	668	!! REAL, DIMENSION(klon,klev) :: d_t_con_sat
	669	!! REAL, DIMENSION(klon,klev) :: d_q_con_sat
	670	!! REAL, DIMENSION(klon,klev) :: dql_sat
[970]	671
[3461]	672	REAL, SAVE :: alp_bl_prescr=0.
	673	REAL, SAVE :: ale_bl_prescr=0.
	674	REAL, SAVE :: wake_s_min_lsp=0.1
[2469]	675	!$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr)
	676	!$OMP THREADPRIVATE(wake_s_min_lsp)
[970]	677
[3461]	678	REAL ok_wk_lsp(klon)
[1516]	679
[2469]	680	!RC
	681	! Variables li\'ees \`a la poche froide (jyg et rr)
[879]	682
[2635]	683	INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are
	684	! updated within calwake
	685	!$OMP THREADPRIVATE(iflag_wake_tend)
[3000]	686	INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting
	687	! power provided by the wakes; else, Alp_wk is the
	688	! lifting power conditionned on the presence of a
	689	! gust-front in the grid cell.
	690	!$OMP THREADPRIVATE(iflag_alp_wk_cond)
[3489]	691
[2635]	692	REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region
	693	REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region
[879]	694
[2469]	695	REAL wake_dth(klon,klev) ! wake : temp pot difference
[879]	696
[2469]	697	REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta
	698	! transported by LS omega
	699	REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of
	700	! large scale omega
	701	REAL wake_dtKE(klon,klev) ! Wake : differential heating
	702	! (wake - unpertubed) CONV
	703	REAL wake_dqKE(klon,klev) ! Wake : differential moistening
	704	! (wake - unpertubed) CONV
	705	REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg
	706	REAL wake_spread(klon,klev) ! spreading term in wake_delt
	707	!
	708	!pourquoi y'a pas de save??
	709	!
[2730]	710	!!! INTEGER, SAVE, DIMENSION(klon) :: wake_k
	711	!!! !$OMP THREADPRIVATE(wake_k)
[2469]	712	!
	713	!jyg<
	714	!cc REAL wake_pe(klon) ! Wake potential energy - WAPE
	715	!>jyg
[879]	716
[3000]	717	REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned)
[2469]	718	REAL wake_gfl(klon) ! Gust Front Length
[2635]	719	!!! REAL wake_dens(klon) ! moved to phys_state_var_mod
[2469]	720	!
	721	!
	722	REAL dt_dwn(klon,klev)
	723	REAL dq_dwn(klon,klev)
	724	REAL M_dwn(klon,klev)
	725	REAL M_up(klon,klev)
	726	REAL dt_a(klon,klev)
	727	REAL dq_a(klon,klev)
	728	REAL d_t_adjwk(klon,klev) !jyg
	729	REAL d_q_adjwk(klon,klev) !jyg
	730	LOGICAL,SAVE :: ok_adjwk=.FALSE.
	731	!$OMP THREADPRIVATE(ok_adjwk)
[2882]	732	INTEGER,SAVE :: iflag_adjwk=0 !jyg
	733	!$OMP THREADPRIVATE(iflag_adjwk) !jyg
[2657]	734	REAL,SAVE :: oliqmax=999.,oicemax=999.
	735	!$OMP THREADPRIVATE(oliqmax,oicemax)
[2469]	736	REAL, SAVE :: alp_offset
	737	!$OMP THREADPRIVATE(alp_offset)
[3150]	738	REAL, SAVE :: dtcon_multistep_max=1.e6
	739	!$OMP THREADPRIVATE(dtcon_multistep_max)
	740	REAL, SAVE :: dqcon_multistep_max=1.e6
	741	!$OMP THREADPRIVATE(dqcon_multistep_max)
	742
[2897]	743
[2469]	744	!
	745	!RR:fin declarations poches froides
	746	!==========================================================================
[1032]	747
[2469]	748	REAL ztv(klon,klev),ztva(klon,klev)
	749	REAL zpspsk(klon,klev)
	750	REAL ztla(klon,klev),zqla(klon,klev)
	751	REAL zthl(klon,klev)
[1638]	752
[2469]	753	!cc nrlmd le 10/04/2012
[1638]	754
[2469]	755	!--------Stochastic Boundary Layer Triggering: ALE_BL--------
	756	!---Propri\'et\'es du thermiques au LCL
[4843]	757	! real zlcl_th(klon) ! Altitude du LCL calcul\'e
[2469]	758	! continument (pcon dans
	759	! thermcell_main.F90)
	760	real fraca0(klon) ! Fraction des thermiques au LCL
	761	real w0(klon) ! Vitesse des thermiques au LCL
	762	real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL
	763	real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps
	764	real therm_tke_max0(klon) ! TKE dans les thermiques au LCL
	765	real env_tke_max0(klon) ! TKE dans l'environnement au LCL
[4822]	766	INTEGER, SAVE :: iflag_thermcell_tke ! transtport TKE by thermals
	767	!$OMP THREADPRIVATE(iflag_thermcell_tke)
[1638]	768
[2799]	769	!JLD !---D\'eclenchement stochastique
	770	!JLD integer :: tau_trig(klon)
[1638]	771
[2469]	772	REAL,SAVE :: random_notrig_max=1.
	773	!$OMP THREADPRIVATE(random_notrig_max)
[2294]	774
[2469]	775	!--------Statistical Boundary Layer Closure: ALP_BL--------
	776	!---Profils de TKE dans et hors du thermique
	777	real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques
	778	real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement
[1638]	779
[2897]	780	!-------Activer les tendances de TKE due a l'orograp??ie---------
	781	INTEGER, SAVE :: addtkeoro
	782	!$OMP THREADPRIVATE(addtkeoro)
	783	REAL, SAVE :: alphatkeoro
	784	!$OMP THREADPRIVATE(alphatkeoro)
	785	LOGICAL, SAVE :: smallscales_tkeoro
	786	!$OMP THREADPRIVATE(smallscales_tkeoro)
[1638]	787
[2897]	788
	789
[2469]	790	!cc fin nrlmd le 10/04/2012
[782]	791
[2469]	792	! Variables locales pour la couche limite (al1):
	793	!
	794	!Al1 REAL pblh(klon) ! Hauteur de couche limite
	795	!Al1 SAVE pblh
	796	!34EK
	797	!
	798	! Variables locales:
	799	!
	800	!AA
	801	!AA Pour phytrac
	802	REAL u1(klon) ! vents dans la premiere couche U
	803	REAL v1(klon) ! vents dans la premiere couche V
[524]	804
[2469]	805	!@$$ LOGICAL offline ! Controle du stockage ds "physique"
	806	!@$$ PARAMETER (offline=.false.)
	807	!@$$ INTEGER physid
	808	REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction)
	809	REAL frac_nucl(klon,klev) ! idem (nucleation)
	810	! RomP >>>
	811	REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt)
	812	! RomP <<<
[2068]	813
[2469]	814	!IM cf FH pour Tiedtke 080604
	815	REAL rain_tiedtke(klon),snow_tiedtke(klon)
	816	!
	817	!IM 050204 END
	818	REAL devap(klon) ! evaporation et sa derivee
	819	REAL dsens(klon) ! chaleur sensible et sa derivee
[1279]	820
[2469]	821	!
	822	! Conditions aux limites
	823	!
	824	!
	825	REAL :: day_since_equinox
	826	! Date de l'equinoxe de printemps
	827	INTEGER, parameter :: mth_eq=3, day_eq=21
	828	REAL :: jD_eq
[1279]	829
[3461]	830	LOGICAL, parameter :: new_orbit = .TRUE.
[524]	831
[2469]	832	!
	833	INTEGER lmt_pas
	834	SAVE lmt_pas ! frequence de mise a jour
	835	!$OMP THREADPRIVATE(lmt_pas)
	836	real zmasse(klon, nbp_lev),exner(klon, nbp_lev)
	837	! (column-density of mass of air in a cell, in kg m-2)
	838	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
[1797]	839
[2469]	840	!IM sorties
	841	REAL un_jour
	842	PARAMETER(un_jour=86400.)
	843	INTEGER itapm1 !pas de temps de la physique du(es) mois precedents
	844	SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours
	845	!$OMP THREADPRIVATE(itapm1)
	846	!======================================================================
	847	!
	848	! Declaration des procedures appelees
	849	!
	850	EXTERNAL angle ! calculer angle zenithal du soleil
	851	EXTERNAL alboc ! calculer l'albedo sur ocean
	852	EXTERNAL ajsec ! ajustement sec
	853	EXTERNAL conlmd ! convection (schema LMD)
	854	EXTERNAL conema3 ! convect4.3
	855	EXTERNAL hgardfou ! verifier les temperatures
	856	EXTERNAL nuage ! calculer les proprietes radiatives
	857	!C EXTERNAL o3cm ! initialiser l'ozone
	858	EXTERNAL orbite ! calculer l'orbite terrestre
	859	EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique
	860	EXTERNAL suphel ! initialiser certaines constantes
	861	EXTERNAL transp ! transport total de l'eau et de l'energie
	862	!IM
	863	EXTERNAL haut2bas !variables de haut en bas
	864	EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression
	865	EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression
	866	! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression
	867	! EXTERNAL moyglo_aire
	868	! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire)
	869	! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass)
	870	!
	871	!
	872	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	873	! Local variables
	874	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	875	!
[4489]	876	! REAL rhcl(klon,klev) ! humiditi relative ciel clair
[2469]	877	REAL dialiq(klon,klev) ! eau liquide nuageuse
	878	REAL diafra(klon,klev) ! fraction nuageuse
[4412]	879	REAL radocond(klon,klev) ! eau condensee nuageuse
[2469]	880	!
	881	!XXX PB
	882	REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite
[4523]	883	REAL fluxqbs(klon,klev, nbsrf) ! flux turbulent de neige soufflee
[2469]	884	!
[4575]	885	!FC REAL zxfluxt(klon, klev)
	886	!FC REAL zxfluxq(klon, klev)
[4523]	887	REAL zxfluxqbs(klon,klev)
[2469]	888	REAL zxfluxu(klon, klev)
	889	REAL zxfluxv(klon, klev)
[1797]	890
[2469]	891	! Le rayonnement n'est pas calcule tous les pas, il faut donc
	892	! sauvegarder les sorties du rayonnement
	893	!ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown
	894	!ym SAVE sollwdownclr, toplwdown, toplwdownclr
	895	!ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0
	896	!
	897	INTEGER itaprad
	898	SAVE itaprad
	899	!$OMP THREADPRIVATE(itaprad)
	900	!
	901	REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s)
	902	REAL conv_t(klon,klev) ! convergence de la temperature(K/s)
	903	!
	904	REAL zsav_tsol(klon)
	905	!
	906	REAL dist, rmu0(klon), fract(klon)
	907	REAL zrmu0(klon), zfract(klon)
	908	REAL zdtime, zdtime1, zdtime2, zlongi
	909	!
	910	REAL z_avant(klon), z_apres(klon), z_factor(klon)
	911	LOGICAL zx_ajustq
	912	!
[2799]	913	REAL za
	914	REAL zx_t, zx_qs, zdelta, zcor
[2469]	915	real zqsat(klon,klev)
	916	!
[4367]	917	INTEGER i, k, iq, nsrf, l, itr
[2469]	918	!
	919	REAL t_coup
	920	PARAMETER (t_coup=234.0)
[1797]	921
[2469]	922	!ym A voir plus tard !!
	923	!ym REAL zx_relief(iim,jjmp1)
	924	!ym REAL zx_aire(iim,jjmp1)
	925	!
	926	! Grandeurs de sorties
	927	REAL s_capCL(klon)
	928	REAL s_oliqCL(klon), s_cteiCL(klon)
	929	REAL s_trmb1(klon), s_trmb2(klon)
	930	REAL s_trmb3(klon)
[2707]	931
	932	! La convection n'est pas calculee tous les pas, il faut donc
	933	! sauvegarder les sorties de la convection
	934	!ym SAVE
	935	!ym SAVE
	936	!ym SAVE
	937	!
[2730]	938	INTEGER itapcv, itapwk
	939	SAVE itapcv, itapwk
	940	!$OMP THREADPRIVATE(itapcv, itapwk)
[2707]	941
[2469]	942	!KE43
	943	! Variables locales pour la convection de K. Emanuel (sb):
[524]	944
[2469]	945	REAL tvp(klon,klev) ! virtual temp of lifted parcel
	946	CHARACTER*40 capemaxcels !max(CAPE)
[1412]	947
[2469]	948	REAL rflag(klon) ! flag fonctionnement de convect
	949	INTEGER iflagctrl(klon) ! flag fonctionnement de convect
[904]	950
[2469]	951	! -- convect43:
	952	INTEGER ntra ! nb traceurs pour convect4.3
	953	REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev)
	954	REAL dplcldt(klon), dplcldr(klon)
	955	!? . condm_con(klon,klev),conda_con(klon,klev),
	956	!? . mr_con(klon,klev),ep_con(klon,klev)
	957	!? . ,sadiab(klon,klev),wadiab(klon,klev)
	958	! --
	959	!34EK
	960	!
	961	! Variables du changement
	962	!
	963	! con: convection
	964	! lsc: condensation a grande echelle (Large-Scale-Condensation)
	965	! ajs: ajustement sec
	966	! eva: evaporation de l'eau liquide nuageuse
	967	! vdf: couche limite (Vertical DiFfusion)
[2611]	968	!
[2469]	969	! tendance nulles
[4523]	970	REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0, dqbs0
[2812]	971	REAL, dimension(klon) :: dsig0, ddens0
	972	INTEGER, dimension(klon) :: wkoccur1
[2801]	973	! tendance buffer pour appel de add_phys_tend
	974	REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime
[2611]	975	!
	976	! Flag pour pouvoir ne pas ajouter les tendances.
	977	! Par defaut, les tendances doivente etre ajoutees et
	978	! flag_inhib_tend = 0
	979	! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre
	980	! croissant de print quand la valeur du flag augmente
	981	!!! attention, ce flag doit etre change avec prudence !!!
	982	INTEGER :: flag_inhib_tend = 0 ! 0 is the default value
	983	!! INTEGER :: flag_inhib_tend = 2
[3134]	984	!
	985	! Logical switch to a bug : reseting to 0 convective variables at the
	986	! begining of physiq.
	987	LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE.
	988	!$OMP THREADPRIVATE(ok_bug_cv_trac)
[3180]	989	!
	990	! Logical switch to a bug : changing wake_deltat when thermals are active
	991	! even when there are no wakes.
	992	LOGICAL, SAVE :: ok_bug_split_th = .TRUE.
	993	!$OMP THREADPRIVATE(ok_bug_split_th)
[524]	994
[4516]	995	! Logical switch to a bug : modifying directly wake_deltat by adding
	996	! the (w) dry adjustment tendency to wake_deltat
	997	LOGICAL, SAVE :: ok_bug_ajs_cv = .TRUE.
	998	!$OMP THREADPRIVATE(ok_bug_ajs_cv)
	999
[2469]	1000	!
	1001	!********************************************************
	1002	! declarations
[524]	1003
[2469]	1004	!********************************************************
	1005	!IM 081204 END
	1006	!
	1007	REAL pen_u(klon,klev), pen_d(klon,klev)
	1008	REAL pde_u(klon,klev), pde_d(klon,klev)
	1009	INTEGER kcbot(klon), kctop(klon), kdtop(klon)
	1010	!
[3461]	1011	REAL ratqsbas,ratqshaut,tau_ratqs
	1012	SAVE ratqsbas,ratqshaut,tau_ratqs
[2469]	1013	!$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs)
[2534]	1014	REAL, SAVE :: ratqsp0=50000., ratqsdp=20000.
	1015	!$OMP THREADPRIVATE(ratqsp0, ratqsdp)
[644]	1016
[2469]	1017	! Parametres lies au nouveau schema de nuages (SB, PDF)
[3461]	1018	REAL, SAVE :: fact_cldcon
	1019	REAL, SAVE :: facttemps
	1020	!$OMP THREADPRIVATE(fact_cldcon,facttemps)
	1021	LOGICAL, SAVE :: ok_newmicro
[2469]	1022	!$OMP THREADPRIVATE(ok_newmicro)
[524]	1023
[3461]	1024	INTEGER, SAVE :: iflag_cld_th
[2469]	1025	!$OMP THREADPRIVATE(iflag_cld_th)
[2877]	1026	!IM logical ptconv(klon,klev) !passe dans phys_local_var_mod
[2469]	1027	!IM cf. AM 081204 BEG
[3461]	1028	LOGICAL ptconvth(klon,klev)
[3999]	1029
	1030	REAL picefra(klon,klev)
[4458]	1031	REAL zrel_oro(klon)
[2469]	1032	!IM cf. AM 081204 END
	1033	!
	1034	! Variables liees a l'ecriture de la bande histoire physique
	1035	!
	1036	!======================================================================
	1037	!
	1038	!
[2799]	1039	!JLD integer itau_w ! pas de temps ecriture = itap + itau_phy
[2469]	1040	!
	1041	!
	1042	! Variables locales pour effectuer les appels en serie
	1043	!
	1044	!IM RH a 2m (la surface)
	1045	REAL Lheat
[524]	1046
[2469]	1047	INTEGER length
	1048	PARAMETER ( length = 100 )
	1049	REAL tabcntr0( length )
	1050	!
[2799]	1051	!JLD INTEGER ndex2d(nbp_lon*nbp_lat)
[2469]	1052	!IM
	1053	!
	1054	!IM AMIP2 BEG
[2799]	1055	!JLD REAL moyglo, mountor
[2469]	1056	!IM 141004 BEG
	1057	REAL zustrdr(klon), zvstrdr(klon)
	1058	REAL zustrli(klon), zvstrli(klon)
	1059	REAL zustrph(klon), zvstrph(klon)
	1060	REAL aam, torsfc
	1061	!IM 141004 END
	1062	!IM 190504 BEG
	1063	! INTEGER imp1jmp1
	1064	! PARAMETER(imp1jmp1=(iim+1)*jjmp1)
	1065	!ym A voir plus tard
	1066	! REAL zx_tmp((nbp_lon+1)*nbp_lat)
	1067	! REAL airedyn(nbp_lon+1,nbp_lat)
	1068	!IM 190504 END
[2799]	1069	!JLD LOGICAL ok_msk
	1070	!JLD REAL msk(klon)
[2469]	1071	!ym A voir plus tard
	1072	!ym REAL zm_wo(jjmp1, klev)
	1073	!IM AMIP2 END
	1074	!
	1075	REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique
	1076	REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D
[2799]	1077	!JLD REAL zx_tmp_2d(nbp_lon,nbp_lat)
	1078	!JLD REAL zx_lon(nbp_lon,nbp_lat)
	1079	!JLD REAL zx_lat(nbp_lon,nbp_lat)
[2469]	1080	!
[2630]	1081	INTEGER nid_ctesGCM
	1082	SAVE nid_ctesGCM
	1083	!$OMP THREADPRIVATE(nid_ctesGCM)
[2469]	1084	!
	1085	!IM 280405 BEG
	1086	! INTEGER nid_bilKPins, nid_bilKPave
	1087	! SAVE nid_bilKPins, nid_bilKPave
	1088	! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave)
	1089	!
	1090	REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert.
	1091	REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert.
	1092	REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert.
	1093	REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert.
	1094	!
[2799]	1095	!JLD REAL zjulian
	1096	!JLD SAVE zjulian
	1097	!JLD!$OMP THREADPRIVATE(zjulian)
[2590]	1098
[2799]	1099	!JLD INTEGER nhori, nvert
	1100	!JLD REAL zsto
	1101	!JLD REAL zstophy, zout
[2068]	1102
[3981]	1103	CHARACTER (LEN=20) :: modname='physiq_mod'
[4056]	1104	CHARACTER*80 abort_message
[3461]	1105	LOGICAL, SAVE :: ok_sync, ok_sync_omp
[2469]	1106	!$OMP THREADPRIVATE(ok_sync)
[3461]	1107	REAL date0
[524]	1108
[2469]	1109	! essai writephys
[3461]	1110	INTEGER fid_day, fid_mth, fid_ins
	1111	PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3)
	1112	INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av
	1113	PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4)
[2469]	1114	REAL ztsol(klon)
	1115	REAL q2m(klon,nbsrf) ! humidite a 2m
[4523]	1116	REAL fsnowerosion(klon,nbsrf) ! blowing snow flux at surface
	1117	REAL qbsfra ! blowing snow fraction
[2469]	1118	!IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels
	1119	CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max
[2799]	1120	CHARACTER*40 tinst, tave
[2469]	1121	REAL cldtaupi(klon,klev) ! Cloud optical thickness for
	1122	! pre-industrial (pi) aerosols
[524]	1123
[2863]	1124	INTEGER :: naero
[2469]	1125	! Aerosol optical properties
	1126	CHARACTER*4, DIMENSION(naero_grp) :: rfname
	1127	REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass
	1128	! concentration
	1129	! for all soluble
	1130	! aerosols[ug/m3]
	1131	REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi
	1132	! - " - (pre-industrial value)
[5202]	1133	REAL, DIMENSION(klon,klev,naero_tot) :: m_allaer
[1279]	1134
[2469]	1135	! Parameters
	1136	LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not
[2738]	1137	LOGICAL ok_alw ! Apply aerosol LW effect or not
[2469]	1138	LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013)
	1139	REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995)
[2738]	1140	SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1
	1141	!$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1)
[2469]	1142	LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA
	1143	! false : lecture des aerosol dans un fichier
	1144	!$OMP THREADPRIVATE(aerosol_couple)
[3338]	1145	LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3
	1146	! false : use offline chemistry O3
	1147	!$OMP THREADPRIVATE(chemistry_couple)
[2469]	1148	INTEGER, SAVE :: flag_aerosol
	1149	!$OMP THREADPRIVATE(flag_aerosol)
[2644]	1150	LOGICAL, SAVE :: flag_bc_internal_mixture
	1151	!$OMP THREADPRIVATE(flag_bc_internal_mixture)
[2469]	1152	!
	1153	!--STRAT AEROSOL
[2530]	1154	INTEGER, SAVE :: flag_aerosol_strat
[2469]	1155	!$OMP THREADPRIVATE(flag_aerosol_strat)
[3412]	1156	!
	1157	!--INTERACTIVE AEROSOL FEEDBACK ON RADIATION
	1158	LOGICAL, SAVE :: flag_aer_feedback
	1159	!$OMP THREADPRIVATE(flag_aer_feedback)
	1160
[2469]	1161	!c-fin STRAT AEROSOL
	1162	!
	1163	! Declaration des constantes et des fonctions thermodynamiques
	1164	!
[3461]	1165	LOGICAL,SAVE :: first=.TRUE.
[2469]	1166	!$OMP THREADPRIVATE(first)
[1279]	1167
[2788]	1168	! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared
	1169	! Note that pressure vectors are in Pa and in stricly ascending order
	1170	INTEGER,SAVE :: read_climoz ! Read ozone climatology
[2469]	1171	! (let it keep the default OpenMP shared attribute)
	1172	! Allowed values are 0, 1 and 2
	1173	! 0: do not read an ozone climatology
	1174	! 1: read a single ozone climatology that will be used day and night
	1175	! 2: read two ozone climatologies, the average day and night
	1176	! climatology and the daylight climatology
[2788]	1177	INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier
[4707]	1178	REAL, ALLOCATABLE, SAVE :: press_cen_climoz(:) ! Pressure levels
	1179	REAL, ALLOCATABLE, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals
	1180	REAL, ALLOCATABLE, SAVE :: time_climoz(:) ! Time vector
[2788]	1181	CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) &
	1182	= ["tro3 ","tro3_daylight"]
	1183	! vars_climoz(1:read_climoz): variables names in climoz file.
[2819]	1184	! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary)
	1185	REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for
	1186	! the ozone fields, old method.
[1279]	1187
[2469]	1188	include "YOMCST.h"
	1189	include "YOETHF.h"
	1190	include "FCTTRE.h"
	1191	!IM 100106 BEG : pouvoir sortir les ctes de la physique
	1192	include "conema3.h"
	1193	include "nuage.h"
	1194	include "compbl.h"
	1195	!IM 100106 END : pouvoir sortir les ctes de la physique
	1196	!
	1197	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1198	! Declarations pour Simulateur COSP
	1199	!============================================================
[4527]	1200	! AI 10-22
	1201	#ifdef CPP_COSP
	1202	include "ini_COSP.h"
	1203	#endif
[4872]	1204	#ifdef CPP_COSPV2
	1205	include "ini_COSP.h"
	1206	#endif
[3511]	1207	real :: mr_ozone(klon,klev), phicosp(klon,klev)
[3370]	1208
[2469]	1209	!IM stations CFMIP
	1210	INTEGER, SAVE :: nCFMIP
	1211	!$OMP THREADPRIVATE(nCFMIP)
	1212	INTEGER, PARAMETER :: npCFMIP=120
	1213	INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:)
	1214	REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:)
	1215	!$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP)
	1216	INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:)
	1217	REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:)
	1218	!$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM)
	1219	INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:)
	1220	!$OMP THREADPRIVATE(iGCM, jGCM)
	1221	logical, dimension(nfiles) :: phys_out_filestations
	1222	logical, parameter :: lNMC=.FALSE.
[1539]	1223
[2469]	1224	!IM betaCRF
	1225	REAL, SAVE :: pfree, beta_pbl, beta_free
	1226	!$OMP THREADPRIVATE(pfree, beta_pbl, beta_free)
	1227	REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta
	1228	!$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta)
	1229	LOGICAL, SAVE :: mskocean_beta
	1230	!$OMP THREADPRIVATE(mskocean_beta)
	1231	REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et
	1232	! cldemirad pour evaluer les
	1233	! retros liees aux CRF
	1234	REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique
	1235	! pour radlwsw pour
	1236	! tester "CRF off"
	1237	REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique
	1238	! pour radlwsw pour
	1239	! tester "CRF off"
	1240	REAL, dimension(klon, klev) :: cldemirad ! emissivite pour
	1241	! radlwsw pour tester
	1242	! "CRF off"
	1243	REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse
[1735]	1244
[3418]	1245	#ifdef INCA
[4367]	1246	REAL :: calday, zxsnow_dummy(klon)
[3418]	1247	! set de variables utilisees pour l'initialisation des valeurs provenant de INCA
	1248	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca
	1249	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca
	1250	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca
	1251	REAL, DIMENSION(klon,klev,nbands) :: init_ccminca
	1252	#endif
	1253	REAL, DIMENSION(klon,nbtr) :: init_source
	1254
[3048]	1255	!lwoff=y : offset LW CRE for radiation code and other schemes
	1256	REAL, SAVE :: betalwoff
	1257	!OMP THREADPRIVATE(betalwoff)
	1258	!
[2469]	1259	INTEGER :: nbtr_tmp ! Number of tracer inside concvl
	1260	REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac
[2784]	1261	REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide)
[2469]	1262	integer iostat
[1539]	1263
[4881]	1264	REAL, dimension(klon,klev+1) :: l_mix_ave, wprime_ave
[2469]	1265	REAL zzz
	1266	!albedo SB >>>
[3461]	1267	REAL,DIMENSION(6), SAVE :: SFRWL
[3435]	1268	!$OMP THREADPRIVATE(SFRWL)
[2469]	1269	!albedo SB <<<
[1955]	1270
[5203]	1271	!--Lea Raillard qs_ini
	1272	REAL, dimension(klon,klev) :: qs_ini
	1273
[2485]	1274	!--OB variables for mass fixer (hard coded for now)
[3461]	1275	REAL qql1(klon),qql2(klon),corrqql
[2476]	1276
[4742]	1277	!--OB flag to activate better conservation of water tendency when convection is not called every timestep
	1278	LOGICAL, PARAMETER :: ok_conserv_d_q_con=.FALSE.
	1279
[4690]	1280	REAL, dimension(klon,klev) :: t_env,q_env
	1281
[4722]	1282	REAL, dimension(klon) :: pr_et
	1283	REAL, dimension(klon) :: w_et, jlr_g_c, jlr_g_s
	1284
[3110]	1285	REAL pi
[4745]	1286	REAL viscom, viscoh
[4625]	1287	INTEGER ieru
[3110]	1288
[4773]	1289	!AI namelist pour gerer le double appel de Ecrad
	1290	CHARACTER(len=512) :: namelist_ecrad_file
	1291
[4537]	1292	!======================================================================!
	1293	! Bifurcation vers un nouveau moniteur physique pour experimenter !
	1294	! des solutions et préparer le couplage avec la physique de MesoNH !
	1295	! 14 mai 2023 !
	1296	!======================================================================!
	1297	if (debut) then !
[4547]	1298	iflag_physiq=0
[4537]	1299	call getin_p('iflag_physiq', iflag_physiq) !
	1300	endif !
	1301	if ( iflag_physiq == 2 ) then !
	1302	call physiqex (nlon,nlev, & !
	1303	debut,lafin,pdtphys_, & !
	1304	paprs,pplay,pphi,pphis,presnivs, & !
	1305	u,v,rot,t,qx, & !
	1306	flxmass_w, & !
	1307	d_u, d_v, d_t, d_qx, d_ps) !
	1308	return !
	1309	endif !
	1310	!======================================================================!
	1311
	1312
[3110]	1313	pi = 4. * ATAN(1.)
	1314
[3981]	1315	! set-up call to alerte function
	1316	call_alert = (alert_first_call .AND. is_master)
	1317
[2469]	1318	! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter"
	1319	jjmp1=nbp_lat
[2344]	1320
[2469]	1321	!======================================================================
	1322	! Gestion calendrier : mise a jour du module phys_cal_mod
	1323	!
	1324	pdtphys=pdtphys_
	1325	CALL update_time(pdtphys)
[3435]	1326	phys_tstep=NINT(pdtphys)
[4619]	1327	IF (.NOT. using_xios) missing_val=nf90_fill_real
	1328
	1329	IF (using_xios) THEN
	1330	! switch to XIOS LMDZ physics context
	1331	IF (.NOT. debut .AND. is_omp_master) THEN
	1332	CALL wxios_set_context()
	1333	CALL xios_update_calendar(itap+1)
	1334	ENDIF
[4236]	1335	ENDIF
[1355]	1336
[2469]	1337	!======================================================================
	1338	! Ecriture eventuelle d'un profil verticale en entree de la physique.
	1339	! Utilise notamment en 1D mais peut etre active egalement en 3D
	1340	! en imposant la valeur de igout.
[4537]	1341	!======================================================================
[2692]	1342	IF (prt_level.ge.1) THEN
[2469]	1343	igout=klon/2+1/klon
	1344	write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	1345	write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), &
	1346	longitude_deg(igout)
	1347	write(lunout,*) &
	1348	'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys'
	1349	write(lunout,*) &
	1350	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys
[879]	1351
[2469]	1352	write(lunout,*) 'paprs, play, phi, u, v, t'
[2692]	1353	DO k=1,klev
[2469]	1354	write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), &
	1355	u(igout,k),v(igout,k),t(igout,k)
[2692]	1356	ENDDO
[2469]	1357	write(lunout,*) 'ovap (g/kg), oliq (g/kg)'
[2692]	1358	DO k=1,klev
[2469]	1359	write(lunout,) qx(igout,k,1)1000,qx(igout,k,2)*1000.
[2692]	1360	ENDDO
	1361	ENDIF
[879]	1362
[2769]	1363	! Quick check on pressure levels:
[3461]	1364	CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), &
[2769]	1365	"physiq_mod paprs bad order")
[879]	1366
[2692]	1367	IF (first) THEN
[4143]	1368	ivap = strIdx(tracers(:)%name, addPhase('H2O', 'g'))
	1369	iliq = strIdx(tracers(:)%name, addPhase('H2O', 'l'))
	1370	isol = strIdx(tracers(:)%name, addPhase('H2O', 's'))
[4523]	1371	ibs = strIdx(tracers(:)%name, addPhase('H2O', 'b'))
[4951]	1372	icf = strIdx(tracers(:)%name, addPhase('H2O', 'f'))
	1373	irvc = strIdx(tracers(:)%name, addPhase('H2O', 'c'))
[4596]	1374	! CALL init_etat0_limit_unstruct
	1375	! IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
[2469]	1376	!CR:nvelles variables convection/poches froides
	1377
[3461]	1378	WRITE(lunout,*) '================================================='
	1379	WRITE(lunout,*) 'Allocation des variables locales et sauvegardees'
	1380	WRITE(lunout,*) '================================================='
[2692]	1381	CALL phys_local_var_init
[2469]	1382	!
	1383	! appel a la lecture du run.def physique
[2692]	1384	CALL conf_phys(ok_journe, ok_mensuel, &
[2469]	1385	ok_instan, ok_hf, &
	1386	ok_LES, &
	1387	callstats, &
	1388	solarlong0,seuil_inversion, &
	1389	fact_cldcon, facttemps,ok_newmicro,iflag_radia, &
[4613]	1390	iflag_cld_th,ratqsbas,ratqshaut,tau_ratqs, &
[3989]	1391	ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, flag_volc_surfstrat, aerosol_couple, &
	1392	chemistry_couple, flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2644]	1393	flag_bc_internal_mixture, bl95_b0, bl95_b1, &
[2469]	1394	! nv flags pour la convection et les
	1395	! poches froides
	1396	read_climoz, &
	1397	alp_offset)
[4596]	1398	CALL init_etat0_limit_unstruct
	1399	IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
[2692]	1400	CALL phys_state_var_init(read_climoz)
	1401	CALL phys_output_var_init
[3522]	1402	IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) &
	1403	CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3435]	1404
[2469]	1405	print*, '================================================='
	1406	!
	1407	!CR: check sur le nb de traceurs de l eau
[2692]	1408	IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN
[2469]	1409	WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', &
[4120]	1410	'(H2O_g, H2O_l, H2O_s) but nqo=', nqo, '. Might as well stop here.'
[3531]	1411	abort_message='see above'
	1412	CALL abort_physic(modname,abort_message,1)
[2692]	1413	ENDIF
[2224]	1414
[4951]	1415	IF (ok_ice_supersat.AND.(iflag_ice_thermo.EQ.0)) THEN
	1416	WRITE (lunout, *) ' ok_ice_supersat=y requires iflag_ice_thermo=1 as well'
[4059]	1417	abort_message='see above'
	1418	CALL abort_physic(modname,abort_message,1)
	1419	ENDIF
	1420
[4951]	1421	IF (ok_ice_supersat.AND.(nqo.LT.5)) THEN
	1422	WRITE (lunout, *) ' ok_ice_supersat=y requires 5 H2O tracers ', &
	1423	'(H2O_g, H2O_l, H2O_s, H2O_f, H2O_c) but nqo=', nqo, '. Might as well stop here.'
[4059]	1424	abort_message='see above'
	1425	CALL abort_physic(modname,abort_message,1)
	1426	ENDIF
	1427
[4951]	1428	IF (ok_plane_h2o.AND..NOT.ok_ice_supersat) THEN
	1429	WRITE (lunout, *) ' ok_plane_h2o=y requires ok_ice_supersat=y '
[4062]	1430	abort_message='see above'
	1431	CALL abort_physic(modname,abort_message,1)
	1432	ENDIF
	1433
[4951]	1434	IF (ok_plane_contrail.AND..NOT.ok_ice_supersat) THEN
	1435	WRITE (lunout, *) ' ok_plane_contrail=y requires ok_ice_supersat=y '
[4062]	1436	abort_message='see above'
	1437	CALL abort_physic(modname,abort_message,1)
	1438	ENDIF
	1439
[4523]	1440	IF (ok_bs) THEN
[4951]	1441	IF ((ok_ice_supersat.AND.nqo .LT.6).OR.(.NOT.ok_ice_supersat.AND.nqo.LT.4)) THEN
[4523]	1442	WRITE (lunout, *) 'activation of blowing snow needs a specific H2O tracer', &
	1443	'but nqo=', nqo
	1444	abort_message='see above'
	1445	CALL abort_physic(modname,abort_message, 1)
	1446	ENDIF
	1447	ENDIF
	1448
[3154]	1449	Ncvpaseq1 = 0
[2469]	1450	dnwd0=0.0
	1451	ftd=0.0
	1452	fqd=0.0
	1453	cin=0.
	1454	!ym Attention pbase pas initialise dans concvl !!!!
	1455	pbase=0
	1456	!IM 180608
[904]	1457
[2469]	1458	itau_con=0
[3461]	1459	first=.FALSE.
[1797]	1460
[2692]	1461	ENDIF ! first
[1797]	1462
[2469]	1463	!ym => necessaire pour iflag_con != 2
	1464	pmfd(:,:) = 0.
	1465	pen_u(:,:) = 0.
	1466	pen_d(:,:) = 0.
	1467	pde_d(:,:) = 0.
	1468	pde_u(:,:) = 0.
	1469	aam=0.
	1470	d_t_adjwk(:,:)=0
	1471	d_q_adjwk(:,:)=0
[1797]	1472
[2469]	1473	alp_bl_conv(:)=0.
[2245]	1474
[2469]	1475	torsfc=0.
	1476	forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg
[1797]	1477
[644]	1478
[2469]	1479	IF (debut) THEN
	1480	CALL suphel ! initialiser constantes et parametres phys.
[3327]	1481	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1482	tau_gl=5.
	1483	CALL getin_p('tau_gl', tau_gl)
	1484	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1485	! secondes
	1486	tau_gl=86400.*tau_gl
[3461]	1487	WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl
[4822]	1488	iflag_thermcell_tke=0
	1489	call getin_p('iflag_thermcell_tke', iflag_thermcell_tke) !
[3461]	1490
[3000]	1491	CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond)
[2469]	1492	CALL getin_p('random_notrig_max',random_notrig_max)
[2882]	1493	CALL getin_p('ok_adjwk',ok_adjwk)
	1494	IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions
	1495	! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region
	1496	! 1 => convective adjustment but state variables are unchanged
	1497	! 2 => convective adjustment and state variables are changed
	1498	CALL getin_p('iflag_adjwk',iflag_adjwk)
[3150]	1499	CALL getin_p('dtcon_multistep_max',dtcon_multistep_max)
	1500	CALL getin_p('dqcon_multistep_max',dqcon_multistep_max)
[2613]	1501	CALL getin_p('oliqmax',oliqmax)
[2657]	1502	CALL getin_p('oicemax',oicemax)
[2534]	1503	CALL getin_p('ratqsp0',ratqsp0)
	1504	CALL getin_p('ratqsdp',ratqsdp)
[2635]	1505	iflag_wake_tend = 0
	1506	CALL getin_p('iflag_wake_tend',iflag_wake_tend)
[2799]	1507	ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set
	1508	! in rrtm/suphec.F90 (and rvtmp2 is set to 0).
	1509	CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo)
[3134]	1510	CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac)
[3180]	1511	CALL getin_p('ok_bug_split_th',ok_bug_split_th)
[4516]	1512	CALL getin_p('ok_bug_ajs_cv',ok_bug_ajs_cv)
[2799]	1513	fl_ebil = 0 ! by default, conservation diagnostics are desactivated
	1514	CALL getin_p('fl_ebil',fl_ebil)
	1515	fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation
	1516	CALL getin_p('fl_cor_ebil',fl_cor_ebil)
[2984]	1517	iflag_phytrac = 1 ! by default we do want to call phytrac
[2973]	1518	CALL getin_p('iflag_phytrac',iflag_phytrac)
[5202]	1519
	1520	ok_water_mass_fixer=.FALSE. ! OB: by default we do not apply the mass fixer
	1521	CALL getin_p('ok_water_mass_fixer',ok_water_mass_fixer)
[3776]	1522	#ifdef CPP_Dust
	1523	IF (iflag_phytrac.EQ.0) THEN
	1524	WRITE(lunout,*) 'In order to run with SPLA, iflag_phytrac will be forced to 1'
	1525	iflag_phytrac = 1
	1526	ENDIF
[4056]	1527	#endif
[3011]	1528	nvm_lmdz = 13
	1529	CALL getin_p('NVM',nvm_lmdz)
[3387]	1530
[3461]	1531	WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond
	1532	WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max
	1533	WRITE(lunout,*) 'ok_adjwk=', ok_adjwk
	1534	WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk
	1535	WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max
	1536	WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max
	1537	WRITE(lunout,*) 'ratqsp0=', ratqsp0
	1538	WRITE(lunout,*) 'ratqsdp=', ratqsdp
	1539	WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend
	1540	WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo
	1541	WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac
	1542	WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th
	1543	WRITE(lunout,*) 'fl_ebil=', fl_ebil
	1544	WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil
	1545	WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac
[5202]	1546	WRITE(lunout,*) 'ok_water_mass_fixer=',ok_water_mass_fixer
[3461]	1547	WRITE(lunout,*) 'NVM=', nvm_lmdz
	1548
[3387]	1549	!--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO
	1550	WRITE(lunout,*) 'Call to infocfields from physiq'
	1551	CALL infocfields_init
	1552
[4677]	1553	!AI 08 2023
	1554	#ifdef CPP_ECRAD
	1555	ok_3Deffect=.false.
	1556	CALL getin_p('ok_3Deffect',ok_3Deffect)
	1557	namelist_ecrad_file='namelist_ecrad'
	1558	#endif
	1559
[2469]	1560	ENDIF
[878]	1561
[2692]	1562	IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 '
[1279]	1563
[2469]	1564	!======================================================================
	1565	! Gestion calendrier : mise a jour du module phys_cal_mod
	1566	!
	1567	! CALL phys_cal_update(jD_cur,jH_cur)
[1279]	1568
[2469]	1569	!
	1570	! Si c'est le debut, il faut initialiser plusieurs choses
	1571	! ********
	1572	!
	1573	IF (debut) THEN
	1574	!rv CRinitialisation de wght_th et lalim_conv pour la
	1575	!definition de la couche alimentation de la convection a partir
	1576	!des caracteristiques du thermique
	1577	wght_th(:,:)=1.
	1578	lalim_conv(:)=1
	1579	!RC
	1580	ustar(:,:)=0.
[2569]	1581	! u10m(:,:)=0.
	1582	! v10m(:,:)=0.
[2469]	1583	rain_con(:)=0.
	1584	snow_con(:)=0.
	1585	topswai(:)=0.
	1586	topswad(:)=0.
	1587	solswai(:)=0.
	1588	solswad(:)=0.
[959]	1589
[2469]	1590	wmax_th(:)=0.
	1591	tau_overturning_th(:)=0.
[645]	1592
[4389]	1593	IF (ANY(type_trac == ['inca','inco'])) THEN
[2469]	1594	! jg : initialisation jusqu'au ces variables sont dans restart
	1595	ccm(:,:,:) = 0.
	1596	tau_aero(:,:,:,:) = 0.
	1597	piz_aero(:,:,:,:) = 0.
	1598	cg_aero(:,:,:,:) = 0.
[4601]	1599	d_q_ch4(:,:) = 0.
[2372]	1600
[2469]	1601	config_inca='none' ! default
	1602	CALL getin_p('config_inca',config_inca)
[2372]	1603
[2469]	1604	ELSE
	1605	config_inca='none' ! default
[2692]	1606	ENDIF
[782]	1607
[3435]	1608	tau_aero(:,:,:,:) = 1.e-15
	1609	piz_aero(:,:,:,:) = 1.
	1610	cg_aero(:,:,:,:) = 0.
[4625]	1611	d_q_ch4(:,:) = 0.
[3435]	1612
[2469]	1613	IF (aerosol_couple .AND. (config_inca /= "aero" &
	1614	.AND. config_inca /= "aeNP ")) THEN
	1615	abort_message &
	1616	= 'if aerosol_couple is activated, config_inca need to be ' &
	1617	// 'aero or aeNP'
	1618	CALL abort_physic (modname,abort_message,1)
	1619	ENDIF
[2443]	1620
[2469]	1621	rnebcon0(:,:) = 0.0
	1622	clwcon0(:,:) = 0.0
	1623	rnebcon(:,:) = 0.0
	1624	clwcon(:,:) = 0.0
[1863]	1625
[2469]	1626	!
	1627	print*,'iflag_coupl,iflag_clos,iflag_wake', &
	1628	iflag_coupl,iflag_clos,iflag_wake
[3317]	1629	print*,'iflag_cycle_diurne', iflag_cycle_diurne
[2469]	1630	!
	1631	IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN
	1632	abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1'
	1633	CALL abort_physic (modname,abort_message,1)
	1634	ENDIF
	1635	!
	1636	!
	1637	! Initialiser les compteurs:
	1638	!
	1639	itap = 0
	1640	itaprad = 0
[2707]	1641	itapcv = 0
[2730]	1642	itapwk = 0
[878]	1643
[2469]	1644	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1645	!! Un petit travail \`a faire ici.
	1646	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[878]	1647
[2692]	1648	IF (iflag_pbl>1) THEN
[2469]	1649	PRINT*, "Using method MELLOR&YAMADA"
[2692]	1650	ENDIF
[956]	1651
[2469]	1652	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1653	! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans
	1654	! phylmd plutot que dyn3d
	1655	! Attention : la version precedente n'etait pas tres propre.
	1656	! Il se peut qu'il faille prendre une valeur differente de nbapp_rad
	1657	! pour obtenir le meme resultat.
[2731]	1658	!jyg for fh<
[3435]	1659	WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys
	1660	IF (abs(phys_tstep-pdtphys)>1.e-10) THEN
[2731]	1661	abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS'
	1662	CALL abort_physic(modname,abort_message,1)
	1663	ENDIF
	1664	!>jyg
[3435]	1665	IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN
	1666	radpas = NINT( 86400./phys_tstep)/nbapp_rad
[2469]	1667	ELSE
	1668	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1669	'multiple de nbapp_rad'
	1670	WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', &
	1671	'mais 1+1<>2'
	1672	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1673	// 'de nbapp_rad'
[2692]	1674	CALL abort_physic(modname,abort_message,1)
[2469]	1675	ENDIF
[3435]	1676	IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep
	1677	IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep
[2730]	1678	print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk
[3435]	1679	IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN
	1680	cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv
[3150]	1681	cvpas = cvpas_0
[2707]	1682	print *,'physiq, cvpas ',cvpas
	1683	ELSE
	1684	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1685	'multiple de nbapp_cv'
	1686	WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', &
	1687	'mais 1+1<>2'
	1688	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1689	// 'de nbapp_cv'
[3461]	1690	CALL abort_physic(modname,abort_message,1)
[2707]	1691	ENDIF
[3435]	1692	IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN
	1693	wkpas = NINT( 86400./phys_tstep)/nbapp_wk
[3457]	1694	! print *,'physiq, wkpas ',wkpas
[2730]	1695	ELSE
	1696	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1697	'multiple de nbapp_wk'
	1698	WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', &
	1699	'mais 1+1<>2'
	1700	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1701	// 'de nbapp_wk'
[3461]	1702	CALL abort_physic(modname,abort_message,1)
[2730]	1703	ENDIF
[2469]	1704	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3465]	1705	CALL init_iophy_new(latitude_deg,longitude_deg)
[524]	1706
[3435]	1707	!===================================================================
	1708	!IM stations CFMIP
	1709	nCFMIP=npCFMIP
	1710	OPEN(98,file='npCFMIP_param.data',status='old', &
	1711	form='formatted',iostat=iostat)
	1712	IF (iostat == 0) THEN
	1713	READ(98,*,end=998) nCFMIP
	1714	998 CONTINUE
	1715	CLOSE(98)
	1716	CONTINUE
	1717	IF(nCFMIP.GT.npCFMIP) THEN
	1718	print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler'
	1719	CALL abort_physic("physiq", "", 1)
	1720	ELSE
	1721	print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP
	1722	ENDIF
	1723
	1724	!
	1725	ALLOCATE(tabCFMIP(nCFMIP))
	1726	ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP))
	1727	ALLOCATE(tabijGCM(nCFMIP))
	1728	ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP))
	1729	ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP))
	1730	!
	1731	! lecture des nCFMIP stations CFMIP, de leur numero
	1732	! et des coordonnees geographiques lonCFMIP, latCFMIP
	1733	!
	1734	CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, &
	1735	lonCFMIP, latCFMIP)
	1736	!
	1737	! identification des
	1738	! 1) coordonnees lonGCM, latGCM des points CFMIP dans la
	1739	! grille de LMDZ
	1740	! 2) indices points tabijGCM de la grille physique 1d sur
	1741	! klon points
	1742	! 3) indices iGCM, jGCM de la grille physique 2d
	1743	!
	1744	CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, &
	1745	tabijGCM, lonGCM, latGCM, iGCM, jGCM)
	1746	!
	1747	ELSE
	1748	ALLOCATE(tabijGCM(0))
	1749	ALLOCATE(lonGCM(0), latGCM(0))
	1750	ALLOCATE(iGCM(0), jGCM(0))
	1751	ENDIF
	1752
	1753	#ifdef CPP_IOIPSL
	1754
	1755	!$OMP MASTER
	1756	! FH : if ok_sync=.true. , the time axis is written at each time step
	1757	! in the output files. Only at the end in the opposite case
[3461]	1758	ok_sync_omp=.FALSE.
[3435]	1759	CALL getin('ok_sync',ok_sync_omp)
	1760	CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, &
	1761	iGCM,jGCM,lonGCM,latGCM, &
	1762	jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, &
	1763	type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
	1764	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, &
	1765	read_climoz, phys_out_filestations, &
[3630]	1766	aerosol_couple, &
[3435]	1767	flag_aerosol_strat, pdtphys, paprs, pphis, &
	1768	pplay, lmax_th, ptconv, ptconvth, ivap, &
	1769	d_u, d_t, qx, d_qx, zmasse, ok_sync_omp)
	1770	!$OMP END MASTER
	1771	!$OMP BARRIER
	1772	ok_sync=ok_sync_omp
	1773
	1774	freq_outNMC(1) = ecrit_files(7)
	1775	freq_outNMC(2) = ecrit_files(8)
	1776	freq_outNMC(3) = ecrit_files(9)
	1777	WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1)
	1778	WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2)
	1779	WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3)
	1780
	1781	#ifndef CPP_XIOS
	1782	CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM)
	1783	#endif
	1784
	1785	#endif
	1786	ecrit_reg = ecrit_reg * un_jour
	1787	ecrit_tra = ecrit_tra * un_jour
	1788
	1789	!XXXPB Positionner date0 pour initialisation de ORCHIDEE
	1790	date0 = jD_ref
	1791	WRITE(,) 'physiq date0 : ',date0
	1792	!
	1793
	1794	! CALL create_climoz(read_climoz)
[4627]	1795	IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol, aerosol_couple) !! initialise aero from file for XIOS interpolation (unstructured_grid)
[3472]	1796	IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid)
[3435]	1797
[5202]	1798	! A.I : Initialisations pour le 1er passage a Cosp
[4527]	1799	if (ok_cosp) then
[5202]	1800
[3435]	1801	#ifdef CPP_COSP
[4527]	1802	CALL ini_COSP(ref_liq_cosp0,ref_ice_cosp0,pctsrf_cosp0,zu10m_cosp0,zv10m_cosp0, &
	1803	zxtsol_cosp0,zx_rh_cosp0,cldfra_cosp0,rnebcon_cosp0,flwc_cosp0, &
	1804	fiwc_cosp0,prfl_cosp0,psfl_cosp0,pmflxr_cosp0,pmflxs_cosp0, &
	1805	mr_ozone_cosp0,cldtau_cosp0,cldemi_cosp0,JrNt_cosp0)
	1806
[3465]	1807	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[3435]	1808	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1809	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1810	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
[4806]	1811	JrNt_cosp0,ref_liq_cosp0,ref_ice_cosp0, &
	1812	pctsrf_cosp0, &
	1813	zu10m_cosp0,zv10m_cosp0,pphis, &
	1814	pphi,paprs(:,1:klev),pplay,zxtsol_cosp0,t, &
	1815	qx(:,:,ivap),zx_rh_cosp0,cldfra_cosp0,rnebcon_cosp0,flwc_cosp0,fiwc_cosp0, &
	1816	prfl_cosp0(:,1:klev),psfl_cosp0(:,1:klev), &
	1817	pmflxr_cosp0(:,1:klev),pmflxs_cosp0(:,1:klev), &
	1818	mr_ozone_cosp0,cldtau_cosp0, cldemi_cosp0)
[3778]	1819	#endif
[3512]	1820
[5202]	1821	#ifdef CPP_COSPV2
	1822	CALL ini_COSP(ref_liq_cosp0,ref_ice_cosp0,pctsrf_cosp0,zu10m_cosp0,zv10m_cosp0, &
[4872]	1823	zxtsol_cosp0,zx_rh_cosp0,cldfra_cosp0,rnebcon_cosp0,flwc_cosp0, &
	1824	fiwc_cosp0,prfl_cosp0,psfl_cosp0,pmflxr_cosp0,pmflxs_cosp0, &
	1825	mr_ozone_cosp0,cldtau_cosp0,cldemi_cosp0,JrNt_cosp0)
[3512]	1826
	1827	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	1828	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1829	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1830	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
[5202]	1831	JrNt_cosp0,ref_liq_cosp0,ref_ice_cosp0, &
	1832	pctsrf_cosp0, &
	1833	zu10m_cosp0,zv10m_cosp0,pphis, &
	1834	pphi,paprs(:,1:klev),pplay,zxtsol_cosp0,t, &
	1835	qx(:,:,ivap),zx_rh_cosp0,cldfra_cosp0,rnebcon_cosp0,flwc_cosp0,fiwc_cosp0, &
	1836	prfl_cosp0(:,1:klev),psfl_cosp0(:,1:klev), &
	1837	pmflxr_cosp0(:,1:klev),pmflxs_cosp0(:,1:klev), &
	1838	mr_ozone_cosp0,cldtau_cosp0, cldemi_cosp0)
[3512]	1839	#endif
[5202]	1840	endif ! ok_cosp
[3512]	1841
[3460]	1842	!
[3465]	1843	!
	1844	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3460]	1845	! Nouvelle initialisation pour le rayonnement RRTM
[3465]	1846	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3435]	1847
[3460]	1848	CALL iniradia(klon,klev,paprs(1,1:klev+1))
[4085]	1849
	1850	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1851	CALL wake_ini(rg,rd,rv,prt_level)
[4448]	1852	CALL yamada_ini(klon,lunout,prt_level)
[4745]	1853	viscom=1.46E-5
	1854	viscoh=2.06E-5
	1855	CALL atke_ini(RG, RD, RPI, RCPD, RV, viscom, viscoh)
[4089]	1856	CALL thermcell_ini(iflag_thermals,prt_level,tau_thermals,lunout, &
	1857	& RG,RD,RCPD,RKAPPA,RLVTT,RETV)
[4613]	1858	CALL ratqs_ini(klon,klev,iflag_thermals,lunout,nbsrf,is_lic,is_ter,RG,RV,RD,RCPD,RLSTT,RLVTT,RTT)
[4951]	1859	CALL lscp_ini(pdtphys,lunout,prt_level,ok_ice_supersat,iflag_ratqs,fl_cor_ebil, &
	1860	RCPD,RLSTT,RLVTT,RLMLT,RVTMP2,RTT,RD,RV,RG,RPI,EPS_W)
[4821]	1861	CALL blowing_snow_ini(RCPD, RLSTT, RLVTT, RLMLT, &
[4835]	1862	RVTMP2, RTT,RD,RG, RV, RPI)
[4715]	1863	! Test de coherence sur oc_cdnc utilisé uniquement par cloud_optics_prop
	1864	IF (ok_newmicro) then
	1865	IF (iflag_rrtm.EQ.1) THEN
	1866	#ifdef CPP_RRTM
	1867	IF (ok_cdnc.AND.NRADLP.NE.3) THEN
	1868	abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' &
	1869	// 'pour ok_cdnc'
	1870	CALL abort_physic(modname,abort_message,1)
	1871	ENDIF
	1872	#else
	1873
	1874	abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1'
	1875	CALL abort_physic(modname,abort_message,1)
	1876	#endif
	1877	ENDIF
	1878	ENDIF
[4692]	1879	CALL cloud_optics_prop_ini(klon, prt_level, lunout, flag_aerosol, &
	1880	& ok_cdnc, bl95_b0, &
[4707]	1881	& bl95_b1, latitude_deg, rpi, rg, rd, &
	1882	& zepsec, novlp, iflag_ice_thermo, ok_new_lscp)
[4085]	1883	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1884
[3956]	1885	!
	1886	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1887	! Initialisation des champs dans phytrac* qui sont utilises par phys_output_write*
	1888	!
	1889	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[5202]	1890	#ifdef REPROBUS
	1891	CALL strataer_init
	1892	CALL strataer_emiss_init
	1893	#endif
[3776]	1894
[5202]	1895	#ifdef CPP_StratAer
	1896	CALL strataer_init
	1897	CALL strataer_nuc_init
	1898	CALL strataer_emiss_init
	1899	#endif
	1900
[3776]	1901	#ifdef CPP_Dust
	1902	! Quand on utilise SPLA, on force iflag_phytrac=1
	1903	CALL phytracr_spl_out_init()
	1904	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	1905	pplay, lmax_th, aerosol_couple, &
	1906	ok_ade, ok_aie, ivap, ok_sync, &
	1907	ptconv, read_climoz, clevSTD, &
	1908	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	1909	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	1910	#else
	1911	! phys_output_write écrit des variables traceurs seulement si iflag_phytrac == 1
	1912	! donc seulement dans ce cas on doit appeler phytrac_init()
[3465]	1913	IF (iflag_phytrac == 1 ) THEN
	1914	CALL phytrac_init()
[3776]	1915	ENDIF
[3465]	1916	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	1917	pplay, lmax_th, aerosol_couple, &
[4523]	1918	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ibs, ok_sync,&
[3465]	1919	ptconv, read_climoz, clevSTD, &
	1920	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
[4608]	1921	flag_aerosol, flag_aerosol_strat, ok_cdnc, t, u1, v1)
[3776]	1922	#endif
[3460]	1923
[3776]	1924
[4619]	1925	IF (using_xios) THEN
	1926	IF (is_omp_master) CALL xios_update_calendar(1)
	1927	ENDIF
	1928
[3465]	1929	IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3877]	1930	CALL create_etat0_limit_unstruct
	1931	CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0)
[3435]	1932
[3465]	1933	!jyg<
[3577]	1934	IF (iflag_pbl<=1) THEN
	1935	! No TKE for Standard Physics
	1936	pbl_tke(:,:,:)=0.
	1937
	1938	ELSE IF (klon_glo==1) THEN
[3465]	1939	pbl_tke(:,:,is_ave) = 0.
[5202]	1940	pbl_eps(:,:,is_ave) = 0.
[3465]	1941	DO nsrf=1,nbsrf
	1942	DO k = 1,klev+1
	1943	pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) &
	1944	+pctsrf(:,nsrf)*pbl_tke(:,k,nsrf)
[5202]	1945	pbl_eps(:,k,is_ave) = pbl_eps(:,k,is_ave) &
	1946	+pctsrf(:,nsrf)*pbl_eps(:,k,nsrf)
[3465]	1947	ENDDO
	1948	ENDDO
[3988]	1949	ELSE
[3465]	1950	pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ??
	1951	!>jyg
[5202]	1952	pbl_eps(:,:,is_ave) = 0.
[3465]	1953	ENDIF
[2469]	1954	!IM begin
	1955	print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) &
	1956	,ratqs(1,1)
	1957	!IM end
[878]	1958
	1959
[2469]	1960	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1961	!
	1962	! on remet le calendrier a zero
	1963	!
	1964	IF (raz_date .eq. 1) THEN
	1965	itau_phy = 0
	1966	ENDIF
[524]	1967
[3435]	1968	! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN
	1969	! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, &
	1970	! pdtphys
	1971	! abort_message='Pas physique n est pas correct '
	1972	! ! call abort_physic(modname,abort_message,1)
	1973	! phys_tstep=pdtphys
	1974	! ENDIF
[2469]	1975	IF (nlon .NE. klon) THEN
	1976	WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, &
	1977	klon
	1978	abort_message='nlon et klon ne sont pas coherents'
[2692]	1979	CALL abort_physic(modname,abort_message,1)
[2469]	1980	ENDIF
	1981	IF (nlev .NE. klev) THEN
	1982	WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, &
	1983	klev
	1984	abort_message='nlev et klev ne sont pas coherents'
[2692]	1985	CALL abort_physic(modname,abort_message,1)
[2469]	1986	ENDIF
	1987	!
[3435]	1988	IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN
[2469]	1989	WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant'
	1990	WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne"
	1991	abort_message='Nbre d appels au rayonnement insuffisant'
[2692]	1992	CALL abort_physic(modname,abort_message,1)
[2469]	1993	ENDIF
[3956]	1994
	1995	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1996	! Initialisation pour la convection de K.E. et pour les poches froides
	1997	!
	1998	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1999
[2469]	2000	WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con
[3989]	2001	WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", ok_cvl
[2469]	2002	!
	2003	!KE43
	2004	! Initialisation pour la convection de K.E. (sb):
	2005	IF (iflag_con.GE.3) THEN
[524]	2006
[2469]	2007	WRITE(lunout,)"** Convection de Kerry Emanuel 4.3 "
	2008	WRITE(lunout,*) &
	2009	"On va utiliser le melange convectif des traceurs qui"
	2010	WRITE(lunout,*)"est calcule dans convect4.3"
	2011	WRITE(lunout,*)" !!! penser aux logical flags de phytrac"
[524]	2012
[2469]	2013	DO i = 1, klon
	2014	ema_cbmf(i) = 0.
	2015	ema_pcb(i) = 0.
	2016	ema_pct(i) = 0.
	2017	! ema_workcbmf(i) = 0.
	2018	ENDDO
	2019	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG
	2020	DO i = 1, klon
	2021	ibas_con(i) = 1
	2022	itop_con(i) = 1
	2023	ENDDO
	2024	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END
	2025	!================================================================
	2026	!CR:04.12.07: initialisations poches froides
	2027	! Controle de ALE et ALP pour la fermeture convective (jyg)
[2692]	2028	IF (iflag_wake>=1) THEN
[2469]	2029	CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr &
	2030	,alp_bl_prescr, ale_bl_prescr)
	2031	! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU)
	2032	! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th
[2638]	2033	!
	2034	! Initialize tendencies of wake state variables (for some flag values
	2035	! they are not computed).
	2036	d_deltat_wk(:,:) = 0.
	2037	d_deltaq_wk(:,:) = 0.
	2038	d_deltat_wk_gw(:,:) = 0.
	2039	d_deltaq_wk_gw(:,:) = 0.
	2040	d_deltat_vdf(:,:) = 0.
	2041	d_deltaq_vdf(:,:) = 0.
	2042	d_deltat_the(:,:) = 0.
	2043	d_deltaq_the(:,:) = 0.
	2044	d_deltat_ajs_cv(:,:) = 0.
	2045	d_deltaq_ajs_cv(:,:) = 0.
	2046	d_s_wk(:) = 0.
[4744]	2047	d_s_a_wk(:) = 0.
[2638]	2048	d_dens_wk(:) = 0.
[4744]	2049	d_dens_a_wk(:) = 0.
[3956]	2050	ENDIF ! (iflag_wake>=1)
[973]	2051
[2469]	2052	! do i = 1,klon
	2053	! Ale_bl(i)=0.
	2054	! Alp_bl(i)=0.
	2055	! enddo
[1638]	2056
[3435]	2057	!ELSE
	2058	! ALLOCATE(tabijGCM(0))
	2059	! ALLOCATE(lonGCM(0), latGCM(0))
	2060	! ALLOCATE(iGCM(0), jGCM(0))
[3956]	2061	ENDIF ! (iflag_con.GE.3)
	2062	!
[2469]	2063	DO i=1,klon
	2064	rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	2065	ENDDO
[1863]	2066
[2469]	2067	!34EK
	2068	IF (ok_orodr) THEN
[524]	2069
[2469]	2070	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2071	! FH sans doute a enlever de finitivement ou, si on le
	2072	! garde, l'activer justement quand ok_orodr = false.
	2073	! ce rugoro est utilise par la couche limite et fait double emploi
	2074	! avec les param\'etrisations sp\'ecifiques de Francois Lott.
	2075	! DO i=1,klon
	2076	! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	2077	! ENDDO
	2078	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2079	IF (ok_strato) THEN
	2080	CALL SUGWD_strato(klon,klev,paprs,pplay)
	2081	ELSE
	2082	CALL SUGWD(klon,klev,paprs,pplay)
	2083	ENDIF
[1863]	2084
[2469]	2085	DO i=1,klon
	2086	zuthe(i)=0.
	2087	zvthe(i)=0.
[2692]	2088	IF (zstd(i).gt.10.) THEN
[2469]	2089	zuthe(i)=(1.-zgam(i))*cos(zthe(i))
	2090	zvthe(i)=(1.-zgam(i))*sin(zthe(i))
[2692]	2091	ENDIF
[2469]	2092	ENDDO
	2093	ENDIF
	2094	!
	2095	!
[3435]	2096	lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours
[2469]	2097	WRITE(lunout,*)'La frequence de lecture surface est de ', &
	2098	lmt_pas
	2099	!
	2100	capemaxcels = 't_max(X)'
	2101	t2mincels = 't_min(X)'
	2102	t2maxcels = 't_max(X)'
	2103	tinst = 'inst(X)'
	2104	tave = 'ave(X)'
	2105	!IM cf. AM 081204 BEG
[3465]	2106	write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con
[2469]	2107	!IM cf. AM 081204 END
	2108	!
	2109	!=============================================================
	2110	! Initialisation des sorties
	2111	!=============================================================
	2112
[4619]	2113	IF (using_xios) THEN
	2114	! Get "missing_val" value from XML files (from temperature variable)
	2115	IF (is_omp_master) CALL xios_get_field_attr("temp",default_value=missing_val)
	2116	CALL bcast_omp(missing_val)
	2117	ENDIF
[3435]	2118
[4619]	2119	IF (using_xios) THEN
	2120	! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only
	2121	! initialised at that moment
	2122	! Get "missing_val" value from XML files (from temperature variable)
	2123	IF (is_omp_master) CALL xios_get_field_attr("temp",default_value=missing_val)
	2124	CALL bcast_omp(missing_val)
[3988]	2125	!
	2126	! Now we activate some double radiation call flags only if some
	2127	! diagnostics are requested, otherwise there is no point in doing this
[4619]	2128	IF (is_master) THEN
	2129	!--setting up swaero_diag to TRUE in XIOS case
	2130	IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. &
	2131	xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. &
	2132	xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. &
	2133	(iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. &
	2134	xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) &
	2135	!!!--for now these fields are not in the XML files so they are omitted
	2136	!!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) &
	2137	swaero_diag=.TRUE.
[3988]	2138
[4619]	2139	!--setting up swaerofree_diag to TRUE in XIOS case
	2140	IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. &
	2141	xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. &
	2142	xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. &
	2143	xios_field_is_active("LWupTOAcleanclr")) &
	2144	swaerofree_diag=.TRUE.
[3988]	2145
[4619]	2146	!--setting up dryaod_diag to TRUE in XIOS case
	2147	DO naero = 1, naero_tot-1
	2148	IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE.
	2149	ENDDO
	2150	!
	2151	!--setting up ok_4xCO2atm to TRUE in XIOS case
	2152	IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. &
	2153	xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. &
	2154	xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. &
	2155	xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. &
	2156	xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. &
	2157	xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) &
	2158	ok_4xCO2atm=.TRUE.
	2159	ENDIF
	2160	!$OMP BARRIER
	2161	CALL bcast(swaero_diag)
	2162	CALL bcast(swaerofree_diag)
	2163	CALL bcast(dryaod_diag)
	2164	CALL bcast(ok_4xCO2atm)
	2165	ENDIF !using_xios
[3988]	2166	!
[3435]	2167	CALL printflag( tabcntr0,radpas,ok_journe, &
	2168	ok_instan, ok_region )
[2469]	2169	!
	2170	!
	2171	! Prescrire l'ozone dans l'atmosphere
	2172	!
	2173	!c DO i = 1, klon
	2174	!c DO k = 1, klev
	2175	!c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20)
	2176	!c ENDDO
	2177	!c ENDDO
	2178	!
[4389]	2179	IF (ANY(type_trac == ['inca','inco'])) THEN ! ModThL
[524]	2180	#ifdef INCA
[2469]	2181	CALL VTe(VTphysiq)
	2182	CALL VTb(VTinca)
	2183	calday = REAL(days_elapsed) + jH_cur
	2184	WRITE(lunout,*) 'initial time chemini', days_elapsed, calday
[959]	2185
[4127]	2186	call init_const_lmdz( &
	2187	ndays, nbsrf, is_oce,is_sic, is_ter,is_lic, calend, &
	2188	config_inca)
	2189
	2190	CALL init_inca_geometry( &
	2191	longitude, latitude, &
	2192	boundslon, boundslat, &
[4224]	2193	cell_area, ind_cell_glo)
[4127]	2194
[4224]	2195	if (grid_type==unstructured) THEN
	2196	CALL chemini( pplay, &
	2197	nbp_lon, nbp_lat, &
	2198	latitude_deg, &
	2199	longitude_deg, &
	2200	presnivs, &
	2201	calday, &
	2202	klon, &
	2203	nqtot, &
	2204	nqo+nqCO2, &
	2205	pdtphys, &
	2206	annee_ref, &
	2207	year_cur, &
	2208	day_ref, &
	2209	day_ini, &
	2210	start_time, &
	2211	itau_phy, &
	2212	date0, &
	2213	chemistry_couple, &
	2214	init_source, &
	2215	init_tauinca, &
	2216	init_pizinca, &
	2217	init_cginca, &
	2218	init_ccminca)
	2219	ELSE
	2220	CALL chemini( pplay, &
	2221	nbp_lon, nbp_lat, &
	2222	latitude_deg, &
	2223	longitude_deg, &
	2224	presnivs, &
	2225	calday, &
	2226	klon, &
	2227	nqtot, &
	2228	nqo+nqCO2, &
	2229	pdtphys, &
	2230	annee_ref, &
	2231	year_cur, &
	2232	day_ref, &
	2233	day_ini, &
	2234	start_time, &
	2235	itau_phy, &
	2236	date0, &
	2237	chemistry_couple, &
	2238	init_source, &
	2239	init_tauinca, &
	2240	init_pizinca, &
	2241	init_cginca, &
	2242	init_ccminca, &
	2243	io_lon, &
	2244	io_lat)
	2245	ENDIF
[4127]	2246
[959]	2247
[3418]	2248	! initialisation des variables depuis le restart de inca
	2249	ccm(:,:,:) = init_ccminca
	2250	tau_aero(:,:,:,:) = init_tauinca
	2251	piz_aero(:,:,:,:) = init_pizinca
	2252	cg_aero(:,:,:,:) = init_cginca
	2253	!
	2254
	2255
[2469]	2256	CALL VTe(VTinca)
	2257	CALL VTb(VTphysiq)
[524]	2258	#endif
[2692]	2259	ENDIF
[3988]	2260	!
[4389]	2261	IF (type_trac == 'repr') THEN
[3666]	2262	#ifdef REPROBUS
	2263	CALL chemini_rep( &
	2264	presnivs, &
	2265	pdtphys, &
	2266	annee_ref, &
	2267	day_ref, &
	2268	day_ini, &
	2269	start_time, &
	2270	itau_phy, &
	2271	io_lon, &
	2272	io_lat)
	2273	#endif
	2274	ENDIF
[3465]	2275
[2469]	2276	!$omp single
[2788]	2277	IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, &
[2820]	2278	press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause)
[2469]	2279	!$omp end single
	2280	!
	2281	!IM betaCRF
	2282	pfree=70000. !Pa
	2283	beta_pbl=1.
	2284	beta_free=1.
	2285	lon1_beta=-180.
	2286	lon2_beta=+180.
	2287	lat1_beta=90.
	2288	lat2_beta=-90.
	2289	mskocean_beta=.FALSE.
[1539]	2290
[2469]	2291	!albedo SB >>>
[3461]	2292	SELECT CASE(nsw)
	2293	CASE(2)
[2469]	2294	SFRWL(1)=0.45538747
	2295	SFRWL(2)=0.54461211
[3461]	2296	CASE(4)
[2469]	2297	SFRWL(1)=0.45538747
	2298	SFRWL(2)=0.32870591
	2299	SFRWL(3)=0.18568763
	2300	SFRWL(4)=3.02191470E-02
[3461]	2301	CASE(6)
[2469]	2302	SFRWL(1)=1.28432794E-03
	2303	SFRWL(2)=0.12304168
	2304	SFRWL(3)=0.33106142
	2305	SFRWL(4)=0.32870591
	2306	SFRWL(5)=0.18568763
	2307	SFRWL(6)=3.02191470E-02
[3461]	2308	END SELECT
[2469]	2309	!albedo SB <<<
[2227]	2310
[2469]	2311	OPEN(99,file='beta_crf.data',status='old', &
	2312	form='formatted',err=9999)
	2313	READ(99,*,end=9998) pfree
	2314	READ(99,*,end=9998) beta_pbl
	2315	READ(99,*,end=9998) beta_free
	2316	READ(99,*,end=9998) lon1_beta
	2317	READ(99,*,end=9998) lon2_beta
	2318	READ(99,*,end=9998) lat1_beta
	2319	READ(99,*,end=9998) lat2_beta
	2320	READ(99,*,end=9998) mskocean_beta
	2321	9998 Continue
	2322	CLOSE(99)
	2323	9999 Continue
	2324	WRITE(,)'pfree=',pfree
	2325	WRITE(,)'beta_pbl=',beta_pbl
	2326	WRITE(,)'beta_free=',beta_free
	2327	WRITE(,)'lon1_beta=',lon1_beta
	2328	WRITE(,)'lon2_beta=',lon2_beta
	2329	WRITE(,)'lat1_beta=',lat1_beta
	2330	WRITE(,)'lat2_beta=',lat2_beta
	2331	WRITE(,)'mskocean_beta=',mskocean_beta
[3048]	2332
	2333	!lwoff=y : offset LW CRE for radiation code and other schemes
	2334	!lwoff=y : betalwoff=1.
	2335	betalwoff=0.
	2336	IF (ok_lwoff) THEN
	2337	betalwoff=1.
	2338	ENDIF
	2339	WRITE(,)'ok_lwoff=',ok_lwoff
	2340	!
	2341	!lwoff=y to begin only sollw and sollwdown are set up to CS values
	2342	sollw = sollw + betalwoff * (sollw0 - sollw)
	2343	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	2344	sollwdown(:))
[3597]	2345
[4951]	2346	!--Init for LSCP - condensation
	2347	ratio_qi_qtot(:,:) = 0.
[3597]	2348
[4085]	2349
[2469]	2350	ENDIF
	2351	!
	2352	! ************** Fin de IF ( debut ) *************
	2353	!
	2354	!
	2355	! Incrementer le compteur de la physique
	2356	!
	2357	itap = itap + 1
[2795]	2358	IF (is_master .OR. prt_level > 9) THEN
[2783]	2359	IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN
[2795]	2360	WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time
	2361	WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600.
	2362	100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17)
[2783]	2363	ENDIF
	2364	ENDIF
[2469]	2365	!
	2366	!
	2367	! Update fraction of the sub-surfaces (pctsrf) and
	2368	! initialize, where a new fraction has appeared, all variables depending
	2369	! on the surface fraction.
	2370	!
[3435]	2371	CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, &
[2469]	2372	pctsrf, fevap, z0m, z0h, agesno, &
	2373	falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke)
[996]	2374
[2469]	2375	! Update time and other variables in Reprobus
[4389]	2376	IF (type_trac == 'repr') THEN
[1565]	2377	#ifdef REPROBUS
[2469]	2378	CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref)
	2379	print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref
	2380	CALL Rtime(debut)
[1565]	2381	#endif
[2692]	2382	ENDIF
[1565]	2383
[2469]	2384	! Tendances bidons pour les processus qui n'affectent pas certaines
	2385	! variables.
	2386	du0(:,:)=0.
	2387	dv0(:,:)=0.
	2388	dt0 = 0.
	2389	dq0(:,:)=0.
	2390	dql0(:,:)=0.
	2391	dqi0(:,:)=0.
[4523]	2392	dqbs0(:,:)=0.
[2635]	2393	dsig0(:) = 0.
	2394	ddens0(:) = 0.
	2395	wkoccur1(:)=1
[2469]	2396	!
	2397	! Mettre a zero des variables de sortie (pour securite)
	2398	!
	2399	DO i = 1, klon
	2400	d_ps(i) = 0.0
	2401	ENDDO
	2402	DO k = 1, klev
	2403	DO i = 1, klon
	2404	d_t(i,k) = 0.0
	2405	d_u(i,k) = 0.0
	2406	d_v(i,k) = 0.0
	2407	ENDDO
	2408	ENDDO
	2409	DO iq = 1, nqtot
	2410	DO k = 1, klev
	2411	DO i = 1, klon
	2412	d_qx(i,k,iq) = 0.0
	2413	ENDDO
	2414	ENDDO
	2415	ENDDO
	2416	beta_prec_fisrt(:,:)=0.
	2417	beta_prec(:,:)=0.
[3134]	2418	!
	2419	! Output variables from the convective scheme should not be set to 0
	2420	! since convection is not always called at every time step.
	2421	IF (ok_bug_cv_trac) THEN
	2422	da(:,:)=0.
	2423	mp(:,:)=0.
	2424	phi(:,:,:)=0.
	2425	! RomP >>>
	2426	phi2(:,:,:)=0.
	2427	epmlmMm(:,:,:)=0.
	2428	eplaMm(:,:)=0.
	2429	d1a(:,:)=0.
	2430	dam(:,:)=0.
	2431	pmflxr(:,:)=0.
	2432	pmflxs(:,:)=0.
	2433	! RomP <<<
	2434	ENDIF
[2469]	2435	!
	2436	! Ne pas affecter les valeurs entrees de u, v, h, et q
	2437	!
	2438	DO k = 1, klev
	2439	DO i = 1, klon
	2440	t_seri(i,k) = t(i,k)
	2441	u_seri(i,k) = u(i,k)
	2442	v_seri(i,k) = v(i,k)
	2443	q_seri(i,k) = qx(i,k,ivap)
	2444	ql_seri(i,k) = qx(i,k,iliq)
[4951]	2445	qbs_seri(i,k)= 0.
	2446	cf_seri(i,k) = 0.
	2447	rvc_seri(i,k)= 0.
[2469]	2448	!CR: ATTENTION, on rajoute la variable glace
[4098]	2449	IF (nqo.EQ.2) THEN !--vapour and liquid only
[2469]	2450	qs_seri(i,k) = 0.
[4098]	2451	ELSE IF (nqo.EQ.3) THEN !--vapour, liquid and ice
[2469]	2452	qs_seri(i,k) = qx(i,k,isol)
[4951]	2453	ELSE IF (nqo.GE.4) THEN !--vapour, liquid, ice, blowing snow, cloud fraction and cloudy water vapor to total water vapor ratio
[4059]	2454	qs_seri(i,k) = qx(i,k,isol)
[4951]	2455	IF (ok_ice_supersat) THEN
	2456	cf_seri(i,k) = qx(i,k,icf)
	2457	rvc_seri(i,k) = qx(i,k,irvc)
[4523]	2458	ENDIF
	2459	IF (ok_bs) THEN
[4886]	2460	qbs_seri(i,k)= qx(i,k,ibs)
[4523]	2461	ENDIF
[2692]	2462	ENDIF
[2469]	2463	ENDDO
	2464	ENDDO
[5203]	2465	! Lea Raillard qs_ini for cloud phase param.
	2466	qs_ini(:,:)=qs_seri(:,:)
[2476]	2467	!
[5202]	2468	!--OB water mass fixer
	2469	IF (ok_water_mass_fixer) THEN
[2476]	2470	!--store initial water burden
	2471	qql1(:)=0.0
[2499]	2472	DO k = 1, klev
[4887]	2473	qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k))*zmasse(:,k)
	2474	IF (nqo >= 3) THEN
	2475	qql1(:)=qql1(:)+qs_seri(:,k)*zmasse(:,k)
	2476	ENDIF
	2477	IF (ok_bs) THEN
	2478	qql1(:)=qql1(:)+qbs_seri(:,k)*zmasse(:,k)
	2479	ENDIF
[2476]	2480	ENDDO
	2481	ENDIF
	2482	!--fin mass fixer
	2483
[2469]	2484	tke0(:,:)=pbl_tke(:,:,is_ave)
[4056]	2485	IF (nqtot > nqo) THEN
	2486	! water isotopes are not included in tr_seri
	2487	itr = 0
	2488	DO iq = 1, nqtot
[4071]	2489	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
[4056]	2490	itr = itr+1
[2469]	2491	DO k = 1, klev
	2492	DO i = 1, klon
[4056]	2493	tr_seri(i,k,itr) = qx(i,k,iq)
[2469]	2494	ENDDO
	2495	ENDDO
	2496	ENDDO
	2497	ELSE
[4056]	2498	! DC: make sure the final "1" index was meant for 1st H2O phase (vapor) !!!
[4120]	2499	tr_seri(:,:,strIdx(tracers(:)%name,addPhase('H2O','g'))) = 0.0
[2469]	2500	ENDIF
[3599]	2501	!
	2502	! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien
	2503	! LF
	2504	IF (debut) THEN
	2505	WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri'
[4056]	2506	itr = 0
	2507	do iq = 1, nqtot
[4071]	2508	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
[4056]	2509	itr = itr+1
	2510	tr_ancien(:,:,itr)=tr_seri(:,:,itr)
	2511	enddo
[3599]	2512	ENDIF
[2469]	2513	!
	2514	DO i = 1, klon
	2515	ztsol(i) = 0.
	2516	ENDDO
	2517	DO nsrf = 1, nbsrf
	2518	DO i = 1, klon
	2519	ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf)
	2520	ENDDO
	2521	ENDDO
[2611]	2522	! Initialize variables used for diagnostic purpose
[2692]	2523	IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri
[524]	2524
[2469]	2525	! Diagnostiquer la tendance dynamique
	2526	!
	2527	IF (ancien_ok) THEN
[2499]	2528	!
[3435]	2529	d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep
	2530	d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep
	2531	d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep
	2532	d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep
	2533	d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep
	2534	d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep
[4951]	2535	d_qbs_dyn(:,:)= (qbs_seri(:,:)-qbs_ancien(:,:))/phys_tstep
	2536	d_cf_dyn(:,:) = (cf_seri(:,:)-cf_ancien(:,:))/phys_tstep
	2537	d_rvc_dyn(:,:)= (rvc_seri(:,:)-rvc_ancien(:,:))/phys_tstep
[2499]	2538	CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d)
[3435]	2539	d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep
[2499]	2540	CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d)
[3435]	2541	d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep
[2499]	2542	CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d)
[3435]	2543	d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep
[4523]	2544	CALL water_int(klon,klev,qbs_seri,zmasse,zx_tmp_fi2d)
	2545	d_qbs_dyn2d(:)=(zx_tmp_fi2d(:)-prbsw_ancien(:))/phys_tstep
[2469]	2546	! !! RomP >>> td dyn traceur
[4056]	2547	IF (nqtot > nqo) d_tr_dyn(:,:,:)=(tr_seri(:,:,:)-tr_ancien(:,:,:))/phys_tstep
[2469]	2548	! !! RomP <<<
	2549	ELSE
[2499]	2550	d_u_dyn(:,:) = 0.0
	2551	d_v_dyn(:,:) = 0.0
	2552	d_t_dyn(:,:) = 0.0
	2553	d_q_dyn(:,:) = 0.0
	2554	d_ql_dyn(:,:) = 0.0
	2555	d_qs_dyn(:,:) = 0.0
[4951]	2556	d_qbs_dyn(:,:)= 0.0
	2557	d_cf_dyn(:,:) = 0.0
	2558	d_rvc_dyn(:,:)= 0.0
[2499]	2559	d_q_dyn2d(:) = 0.0
	2560	d_ql_dyn2d(:) = 0.0
	2561	d_qs_dyn2d(:) = 0.0
[4523]	2562	d_qbs_dyn2d(:)= 0.0
[2469]	2563	! !! RomP >>> td dyn traceur
[4056]	2564	IF (nqtot > nqo) d_tr_dyn(:,:,:)= 0.0
[2469]	2565	! !! RomP <<<
	2566	ancien_ok = .TRUE.
	2567	ENDIF
	2568	!
	2569	! Ajouter le geopotentiel du sol:
	2570	!
	2571	DO k = 1, klev
	2572	DO i = 1, klon
	2573	zphi(i,k) = pphi(i,k) + pphis(i)
	2574	ENDDO
	2575	ENDDO
	2576	!
	2577	! Verifier les temperatures
	2578	!
	2579	!IM BEG
	2580	IF (check) THEN
	2581	amn=MIN(ftsol(1,is_ter),1000.)
	2582	amx=MAX(ftsol(1,is_ter),-1000.)
	2583	DO i=2, klon
	2584	amn=MIN(ftsol(i,is_ter),amn)
	2585	amx=MAX(ftsol(i,is_ter),amx)
	2586	ENDDO
	2587	!
	2588	PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx
	2589	ENDIF !(check) THEN
	2590	!IM END
	2591	!
	2592	CALL hgardfou(t_seri,ftsol,'debutphy',abortphy)
	2593	IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy'
[2235]	2594
[2469]	2595	!
	2596	!IM BEG
	2597	IF (check) THEN
	2598	amn=MIN(ftsol(1,is_ter),1000.)
	2599	amx=MAX(ftsol(1,is_ter),-1000.)
	2600	DO i=2, klon
	2601	amn=MIN(ftsol(i,is_ter),amn)
	2602	amx=MAX(ftsol(i,is_ter),amx)
	2603	ENDDO
	2604	!
	2605	PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx
	2606	ENDIF !(check) THEN
	2607	!IM END
	2608	!
	2609	! Mettre en action les conditions aux limites (albedo, sst, etc.).
	2610	! Prescrire l'ozone et calculer l'albedo sur l'ocean.
	2611	!
[2661]	2612	! Update ozone if day change
	2613	IF (MOD(itap-1,lmt_pas) == 0) THEN
[2774]	2614	IF (read_climoz <= 0) THEN
	2615	! Once per day, update ozone from Royer:
	2616	IF (solarlong0<-999.) then
	2617	! Generic case with evolvoing season
	2618	zzz=real(days_elapsed+1)
	2619	ELSE IF (abs(solarlong0-1000.)<1.e-4) then
	2620	! Particular case with annual mean insolation
	2621	zzz=real(90) ! could be revisited
	2622	IF (read_climoz/=-1) THEN
	2623	abort_message ='read_climoz=-1 is recommended when ' &
	2624	// 'solarlong0=1000.'
	2625	CALL abort_physic (modname,abort_message,1)
	2626	ENDIF
	2627	ELSE
	2628	! Case where the season is imposed with solarlong0
	2629	zzz=real(90) ! could be revisited
	2630	ENDIF
[2661]	2631
[2774]	2632	wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz)
[3666]	2633	#ifdef REPROBUS
	2634	ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100.
	2635	DO i = 1, klon
	2636	Z1=t_seri(i,itroprep(i)+1)
	2637	Z2=t_seri(i,itroprep(i))
	2638	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2639	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2640	ttrop(i)= fac*alog(ptrop(i))+B
	2641	!
	2642	Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit
	2643	Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit
	2644	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2645	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2646	ztrop(i)=fac*alog(ptrop(i))+B
	2647	ENDDO
	2648	#endif
[2774]	2649	ELSE
[2820]	2650	!--- ro3i = elapsed days number since current year 1st january, 0h
	2651	ro3i=days_elapsed+jh_cur-jh_1jan
	2652	!--- scaling for old style files (360 records)
	2653	IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len
[2788]	2654	IF(adjust_tropopause) THEN
[2820]	2655	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
[3086]	2656	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2657	time_climoz , longitude_deg, latitude_deg, &
[2968]	2658	dyn_tropopause(t_seri, ztsol, paprs, pplay, rot))
[2774]	2659	ELSE
[3086]	2660	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
	2661	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2662	time_climoz )
[3461]	2663	ENDIF
[2774]	2664	! Convert from mole fraction of ozone to column density of ozone in a
	2665	! cell, in kDU:
	2666	FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd &
	2667	* zmasse / dobson_u / 1e3
[2788]	2668	! (By regridding ozone values for LMDZ only once a day, we
[2774]	2669	! have already neglected the variation of pressure in one
	2670	! day. So do not recompute "wo" at each time step even if
	2671	! "zmasse" changes a little.)
	2672	ENDIF
[2469]	2673	ENDIF
[4951]	2674
	2675	!-- Needed for LSCP - condensation and ice supersaturation
	2676	IF (ok_ice_supersat) THEN
	2677	DO k = 1, klev
	2678	DO i = 1, klon
	2679	IF ( ( q_seri(i,k) + ql_seri(i,k) + qs_seri(i,k) ) .GT. 0. ) THEN
	2680	ratio_qi_qtot(i,k) = qs_seri(i,k) / ( q_seri(i,k) + ql_seri(i,k) + qs_seri(i,k) )
	2681	rvc_seri(i,k) = rvc_seri(i,k) * q_seri(i,k) / ( q_seri(i,k) + ql_seri(i,k) + qs_seri(i,k) )
	2682	ELSE
	2683	ratio_qi_qtot(i,k) = 0.
	2684	rvc_seri(i,k) = 0.
	2685	ENDIF
	2686	ENDDO
	2687	ENDDO
	2688	ENDIF
	2689
[2469]	2690	!
	2691	! Re-evaporer l'eau liquide nuageuse
	2692	!
[2705]	2693	CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, &
	2694	& d_t_eva,d_q_eva,d_ql_eva,d_qi_eva)
[1849]	2695
[2705]	2696	CALL add_phys_tend &
[4523]	2697	(du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,dqbs0,paprs,&
[2812]	2698	'eva',abortphy,flag_inhib_tend,itap,0)
[3461]	2699	CALL prt_enerbil('eva',itap)
[2086]	2700
[2469]	2701	!=========================================================================
	2702	! Calculs de l'orbite.
	2703	! Necessaires pour le rayonnement et la surface (calcul de l'albedo).
	2704	! doit donc etre plac\'e avant radlwsw et pbl_surface
[883]	2705
[2469]	2706	! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2692]	2707	CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq)
[2469]	2708	day_since_equinox = (jD_cur + jH_cur) - jD_eq
	2709	!
	2710	! choix entre calcul de la longitude solaire vraie ou valeur fixee a
	2711	! solarlong0
[2692]	2712	IF (solarlong0<-999.) THEN
	2713	IF (new_orbit) THEN
[2469]	2714	! calcul selon la routine utilisee pour les planetes
[2692]	2715	CALL solarlong(day_since_equinox, zlongi, dist)
	2716	ELSE
[2469]	2717	! calcul selon la routine utilisee pour l'AR4
	2718	CALL orbite(REAL(days_elapsed+1),zlongi,dist)
[2692]	2719	ENDIF
	2720	ELSE
[2469]	2721	zlongi=solarlong0 ! longitude solaire vraie
	2722	dist=1. ! distance au soleil / moyenne
[2692]	2723	ENDIF
[1529]	2724
[2692]	2725	IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist
[524]	2726
[2692]	2727
[2469]	2728	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2729	! Calcul de l'ensoleillement :
	2730	! ============================
	2731	! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur
	2732	! l'annee a partir d'une formule analytique.
	2733	! Cet ensoleillement est sym\'etrique autour de l'\'equateur et
	2734	! non nul aux poles.
[2692]	2735	IF (abs(solarlong0-1000.)<1.e-4) THEN
	2736	CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, &
[2469]	2737	latitude_deg,longitude_deg,rmu0,fract)
[2979]	2738	swradcorr(:) = 1.0
	2739	JrNt(:) = 1.0
	2740	zrmu0(:) = rmu0(:)
[2469]	2741	ELSE
	2742	! recode par Olivier Boucher en sept 2015
	2743	SELECT CASE (iflag_cycle_diurne)
	2744	CASE(0)
	2745	! Sans cycle diurne
	2746	CALL angle(zlongi, latitude_deg, fract, rmu0)
	2747	swradcorr = 1.0
	2748	JrNt = 1.0
	2749	zrmu0 = rmu0
	2750	CASE(1)
	2751	! Avec cycle diurne sans application des poids
	2752	! bit comparable a l ancienne formulation cycle_diurne=true
	2753	! on integre entre gmtime et gmtime+radpas
[3435]	2754	zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s)
[2469]	2755	CALL zenang(zlongi,jH_cur,0.0,zdtime, &
	2756	latitude_deg,longitude_deg,rmu0,fract)
	2757	zrmu0 = rmu0
	2758	swradcorr = 1.0
	2759	! Calcul du flag jour-nuit
	2760	JrNt = 0.0
	2761	WHERE (fract.GT.0.0) JrNt = 1.0
	2762	CASE(2)
	2763	! Avec cycle diurne sans application des poids
	2764	! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1)
	2765	! Comme cette routine est appele a tous les pas de temps de
	2766	! la physique meme si le rayonnement n'est pas appele je
	2767	! remonte en arriere les radpas-1 pas de temps
	2768	! suivant. Petite ruse avec MOD pour prendre en compte le
	2769	! premier pas de temps de la physique pendant lequel
	2770	! itaprad=0
[3435]	2771	zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1)
	2772	zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1)
[2469]	2773	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2774	latitude_deg,longitude_deg,rmu0,fract)
	2775	!
	2776	! Calcul des poids
	2777	!
[3435]	2778	zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le
[2469]	2779	zdtime2=0.0 !--pas de temps de la physique qui se termine
	2780	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2781	latitude_deg,longitude_deg,zrmu0,zfract)
	2782	swradcorr = 0.0
	2783	WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) &
	2784	swradcorr=zfract/fract*zrmu0/rmu0
	2785	! Calcul du flag jour-nuit
	2786	JrNt = 0.0
	2787	WHERE (zfract.GT.0.0) JrNt = 1.0
	2788	END SELECT
	2789	ENDIF
[3110]	2790	sza_o = ACOS (rmu0) *180./pi
[782]	2791
[2692]	2792	IF (mydebug) THEN
	2793	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2794	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2795	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2796	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2797	ENDIF
[883]	2798
[2469]	2799	!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
	2800	! Appel au pbl_surface : Planetary Boudary Layer et Surface
	2801	! Cela implique tous les interactions des sous-surfaces et la
	2802	! partie diffusion turbulent du couche limit.
	2803	!
	2804	! Certains varibales de sorties de pbl_surface sont utiliser que pour
	2805	! ecriture des fihiers hist_XXXX.nc, ces sont :
	2806	! qsol, zq2m, s_pblh, s_lcl,
	2807	! s_capCL, s_oliqCL, s_cteiCL,s_pblT,
	2808	! s_therm, s_trmb1, s_trmb2, s_trmb3,
	2809	! zu10m, zv10m, fder,
[3888]	2810	! zxqsurf, delta_qsurf,
	2811	! rh2m, zxfluxu, zxfluxv,
[2469]	2812	! frugs, agesno, fsollw, fsolsw,
	2813	! d_ts, fevap, fluxlat, t2m,
[4737]	2814	! wfbils, fluxt, fluxu, fluxv,
[2469]	2815	!
	2816	! Certains ne sont pas utiliser du tout :
	2817	! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq
	2818	!
[1724]	2819
[2469]	2820	! Calcul de l'humidite de saturation au niveau du sol
[1724]	2821
[4690]	2822	! Tests Fredho, instensibilite au pas de temps -------------------------------
	2823	! A detruire en 2024 une fois les tests documentes et les choix faits !
	2824	! Conservation des variables avant l'appel à l a diffusion pour les tehrmic !
	2825	if (iflag_thermals_tenv / 10 == 1 ) then !
	2826	do k=1,klev !
	2827	do i=1,klon !
	2828	t_env(i,k)=t_seri(i,k) !
	2829	q_env(i,k)=q_seri(i,k) !
	2830	enddo !
	2831	enddo !
	2832	else if (iflag_thermals_tenv / 10 == 2 ) then !
	2833	do k=1,klev !
	2834	do i=1,klon !
	2835	t_env(i,k)=t_seri(i,k) !
	2836	enddo !
	2837	enddo !
	2838	endif !
	2839	! Tests Fredho, instensibilite au pas de temps -------------------------------
[1724]	2840
[996]	2841
[2692]	2842	IF (iflag_pbl/=0) THEN
[2240]	2843
[2469]	2844	!jyg+nrlmd<
[2852]	2845	!!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN
	2846	IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN
[3179]	2847	print *,'debut du splitting de la PBL, wake_s = ', wake_s(:)
	2848	print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1)
	2849	print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1)
[2469]	2850	ENDIF
	2851	! !!
	2852	!>jyg+nrlmd
	2853	!
	2854	!-------gustiness calculation-------!
[3435]	2855	!ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3
	2856	gustiness=0 !ym missing init
	2857
[2469]	2858	IF (iflag_gusts==0) THEN
	2859	gustiness(1:klon)=0
	2860	ELSE IF (iflag_gusts==1) THEN
[3111]	2861	gustiness(1:klon)=f_gust_blale_bl(1:klon)+f_gust_wkale_wake(1:klon)
	2862	ELSE IF (iflag_gusts==2) THEN
	2863	gustiness(1:klon)=f_gust_blale_bl_stat(1:klon)+f_gust_wkale_wake(1:klon)
[4722]	2864	!!!! modif olivier torres
	2865	ELSE IF (iflag_gusts==3) THEN
	2866	w_et=wstar(1,3)
	2867	jlr_g_s=(0.65w_et)*2
	2868	pr_et=rain_con*8640
	2869	jlr_g_c = (((19.8(pr_et(1:klon)2))/(1.5+pr_et(1:klon)+pr_et(1:klon)2))(0.4))*2
	2870	gustiness(1:klon)=jlr_g_c+jlr_g_s
	2871	!! write(,) "rain ",pr_et
	2872	!! write(,) "jlr_g_c",jlr_g_c
	2873	!! write(,) "wstar",wstar(1,3)
	2874	!! write(,) "jlr_g_s",jlr_g_s
[2469]	2875	! ELSE IF (iflag_gusts==2) THEN
	2876	! do i = 1, klon
	2877	! gustiness(i)=f_gust_blale_bl(i)+sigma_wk(i)f_gust_wk&
	2878	! *ale_wake(i) !! need to make sigma_wk accessible here
	2879	! enddo
	2880	! ELSE IF (iflag_gusts==3) THEN
	2881	! do i = 1, klon
	2882	! gustiness(i)=f_gust_blalp_bl(i)+f_gust_wkalp_wake(i)
	2883	! enddo
	2884	ENDIF
[2278]	2885
[2469]	2886	CALL pbl_surface( &
[3435]	2887	phys_tstep, date0, itap, days_elapsed+1, &
[2469]	2888	debut, lafin, &
	2889	longitude_deg, latitude_deg, rugoro, zrmu0, &
[4056]	2890	sollwdown, cldt, &
[4523]	2891	rain_fall, snow_fall, bs_fall, solsw, solswfdiff, sollw, &
[2469]	2892	gustiness, &
[4523]	2893	t_seri, q_seri, qbs_seri, u_seri, v_seri, &
[2469]	2894	!nrlmd+jyg<
	2895	wake_deltat, wake_deltaq, wake_cstar, wake_s, &
	2896	!>nrlmd+jyg
	2897	pplay, paprs, pctsrf, &
	2898	ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, &
	2899	!albedo SB <<<
	2900	cdragh, cdragm, u1, v1, &
[3888]	2901	beta_aridity, &
[2469]	2902	!albedo SB >>>
	2903	! albsol1, albsol2, sens, evap, &
[4523]	2904	albsol_dir, albsol_dif, sens, evap, snowerosion, &
[2469]	2905	!albedo SB <<<
	2906	albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, &
[3817]	2907	zxtsol, zxfluxlat, zt2m, qsat2m, zn2mout, &
[4523]	2908	d_t_vdf, d_q_vdf, d_qbs_vdf, d_u_vdf, d_v_vdf, d_t_diss, &
[2469]	2909	!nrlmd<
	2910	!jyg<
	2911	d_t_vdf_w, d_q_vdf_w, &
	2912	d_t_vdf_x, d_q_vdf_x, &
	2913	sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, &
	2914	!>jyg
	2915	delta_tsurf,wake_dens, &
	2916	cdragh_x,cdragh_w,cdragm_x,cdragm_w, &
	2917	kh,kh_x,kh_w, &
	2918	!>nrlmd
	2919	coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), &
	2920	slab_wfbils, &
	2921	qsol, zq2m, s_pblh, s_lcl, &
	2922	!jyg<
	2923	s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, &
	2924	!>jyg
	2925	s_capCL, s_oliqCL, s_cteiCL,s_pblT, &
	2926	s_therm, s_trmb1, s_trmb2, s_trmb3, &
	2927	zustar, zu10m, zv10m, fder, &
[3888]	2928	zxqsurf, delta_qsurf, rh2m, zxfluxu, zxfluxv, &
[2469]	2929	z0m, z0h, agesno, fsollw, fsolsw, &
	2930	d_ts, fevap, fluxlat, t2m, &
[4737]	2931	wfbils, wfevap, &
[2670]	2932	fluxt, fluxu, fluxv, &
[2469]	2933	dsens, devap, zxsnow, &
[4881]	2934	zxfluxt, zxfluxq, zxfluxqbs, q2m, fluxq, fluxqbs, pbl_tke, pbl_eps, &
[2469]	2935	!nrlmd+jyg<
[2952]	2936	wake_delta_pbl_TKE, &
[2469]	2937	!>nrlmd+jyg
[2952]	2938	treedrg )
	2939	!FC
[2469]	2940	!
	2941	! Add turbulent diffusion tendency to the wake difference variables
[2852]	2942	!!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN
	2943	IF (mod(iflag_pbl_split,10) .NE. 0) THEN
[2635]	2944	!jyg<
	2945	d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:)
	2946	d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:)
	2947	CALL add_wake_tend &
[4744]	2948	(d_deltat_vdf, d_deltaq_vdf, dsig0, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy)
[2635]	2949	ELSE
	2950	d_deltat_vdf(:,:) = 0.
	2951	d_deltaq_vdf(:,:) = 0.
	2952	!>jyg
[2469]	2953	ENDIF
[1624]	2954
[2469]	2955	!---------------------------------------------------------------------
	2956	! ajout des tendances de la diffusion turbulente
	2957	IF (klon_glo==1) THEN
	2958	CALL add_pbl_tend &
[4523]	2959	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,d_qbs_vdf,paprs,&
[2799]	2960	'vdf',abortphy,flag_inhib_tend,itap)
[2469]	2961	ELSE
	2962	CALL add_phys_tend &
[4523]	2963	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,d_qbs_vdf,paprs,&
[2812]	2964	'vdf',abortphy,flag_inhib_tend,itap,0)
[2469]	2965	ENDIF
[3461]	2966	CALL prt_enerbil('vdf',itap)
[4523]	2967
[2469]	2968	!--------------------------------------------------------------------
[766]	2969
[2692]	2970	IF (mydebug) THEN
	2971	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2972	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2973	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2974	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2975	ENDIF
[2227]	2976
[2469]	2977	!albedo SB >>>
	2978	albsol1=0.
	2979	albsol2=0.
	2980	falb1=0.
	2981	falb2=0.
[2692]	2982	SELECT CASE(nsw)
	2983	CASE(2)
[2469]	2984	albsol1=albsol_dir(:,1)
	2985	albsol2=albsol_dir(:,2)
	2986	falb1=falb_dir(:,1,:)
	2987	falb2=falb_dir(:,2,:)
[2692]	2988	CASE(4)
[2469]	2989	albsol1=albsol_dir(:,1)
	2990	albsol2=albsol_dir(:,2)SFRWL(2)+albsol_dir(:,3)SFRWL(3) &
	2991	+albsol_dir(:,4)*SFRWL(4)
	2992	albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
	2993	falb1=falb_dir(:,1,:)
	2994	falb2=falb_dir(:,2,:)SFRWL(2)+falb_dir(:,3,:)SFRWL(3) &
	2995	+falb_dir(:,4,:)*SFRWL(4)
	2996	falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
[2692]	2997	CASE(6)
[2469]	2998	albsol1=albsol_dir(:,1)SFRWL(1)+albsol_dir(:,2)SFRWL(2) &
	2999	+albsol_dir(:,3)*SFRWL(3)
	3000	albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	3001	albsol2=albsol_dir(:,4)SFRWL(4)+albsol_dir(:,5)SFRWL(5) &
	3002	+albsol_dir(:,6)*SFRWL(6)
	3003	albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
	3004	falb1=falb_dir(:,1,:)SFRWL(1)+falb_dir(:,2,:)SFRWL(2) &
	3005	+falb_dir(:,3,:)*SFRWL(3)
	3006	falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	3007	falb2=falb_dir(:,4,:)SFRWL(4)+falb_dir(:,5,:)SFRWL(5) &
	3008	+falb_dir(:,6,:)*SFRWL(6)
	3009	falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
[2692]	3010	END SELECt
[2469]	3011	!albedo SB <<<
[2227]	3012
[766]	3013
[2469]	3014	CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, &
	3015	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot)
[1724]	3016
[2469]	3017	ENDIF
[4523]	3018
	3019	! ==================================================================
	3020	! Blowing snow sublimation and sedimentation
	3021
[5202]	3022	d_t_bsss(:,:)=0.
	3023	d_q_bsss(:,:)=0.
	3024	d_qbs_bsss(:,:)=0.
[4523]	3025	bsfl(:,:)=0.
	3026	bs_fall(:)=0.
	3027	IF (ok_bs) THEN
	3028
	3029	CALL call_blowing_snow_sublim_sedim(klon,klev,phys_tstep,t_seri,q_seri,qbs_seri,pplay,paprs, &
[5202]	3030	d_t_bsss,d_q_bsss,d_qbs_bsss,bsfl,bs_fall)
[4523]	3031
	3032	CALL add_phys_tend &
[5202]	3033	(du0,dv0,d_t_bsss,d_q_bsss,dql0,dqi0,d_qbs_bsss,paprs,&
	3034	'bsss',abortphy,flag_inhib_tend,itap,0)
[4523]	3035
	3036	ENDIF
	3037
[2469]	3038	! =================================================================== c
	3039	! Calcul de Qsat
[881]	3040
[2469]	3041	DO k = 1, klev
	3042	DO i = 1, klon
	3043	zx_t = t_seri(i,k)
	3044	IF (thermcep) THEN
	3045	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	3046	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	3047	zx_qs = MIN(0.5,zx_qs)
	3048	zcor = 1./(1.-retv*zx_qs)
	3049	zx_qs = zx_qs*zcor
	3050	ELSE
	3051	!! IF (zx_t.LT.t_coup) THEN !jyg
	3052	IF (zx_t.LT.rtt) THEN !jyg
	3053	zx_qs = qsats(zx_t)/pplay(i,k)
	3054	ELSE
	3055	zx_qs = qsatl(zx_t)/pplay(i,k)
	3056	ENDIF
	3057	ENDIF
	3058	zqsat(i,k)=zx_qs
	3059	ENDDO
	3060	ENDDO
[959]	3061
[2692]	3062	IF (prt_level.ge.1) THEN
[2469]	3063	write(lunout,*) 'L qsat (g/kg) avant clouds_gno'
	3064	write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev)
[2692]	3065	ENDIF
[2469]	3066	!
	3067	! Appeler la convection (au choix)
	3068	!
	3069	DO k = 1, klev
	3070	DO i = 1, klon
	3071	conv_q(i,k) = d_q_dyn(i,k) &
[3435]	3072	+ d_q_vdf(i,k)/phys_tstep
[2469]	3073	conv_t(i,k) = d_t_dyn(i,k) &
[3435]	3074	+ d_t_vdf(i,k)/phys_tstep
[2469]	3075	ENDDO
	3076	ENDDO
[959]	3077
[2469]	3078	! Calcule de vitesse verticale a partir de flux de masse verticale
	3079	DO k = 1, klev
	3080	DO i = 1, klon
	3081	omega(i,k) = RG*flxmass_w(i,k) / cell_area(i)
[2692]	3082	ENDDO
	3083	ENDDO
	3084
	3085	IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', &
[2469]	3086	omega(igout, :)
[2707]	3087	!
	3088	! Appel de la convection tous les "cvpas"
	3089	!
[3150]	3090	!!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN
[3151]	3091	!! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', &
	3092	!! itapcv, cvpas, itap-1, cvpas_0
[3150]	3093	IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN
[2707]	3094
[3134]	3095	!
	3096	! Mettre a zero des variables de sortie (pour securite)
	3097	!
	3098	pmflxr(:,:) = 0.
	3099	pmflxs(:,:) = 0.
	3100	wdtrainA(:,:) = 0.
[3496]	3101	wdtrainS(:,:) = 0.
[3134]	3102	wdtrainM(:,:) = 0.
	3103	upwd(:,:) = 0.
	3104	dnwd(:,:) = 0.
	3105	ep(:,:) = 0.
	3106	da(:,:)=0.
	3107	mp(:,:)=0.
	3108	wght_cvfd(:,:)=0.
	3109	phi(:,:,:)=0.
	3110	phi2(:,:,:)=0.
	3111	epmlmMm(:,:,:)=0.
	3112	eplaMm(:,:)=0.
	3113	d1a(:,:)=0.
	3114	dam(:,:)=0.
	3115	elij(:,:,:)=0.
	3116	ev(:,:)=0.
[3496]	3117	qtaa(:,:)=0.
[3134]	3118	clw(:,:)=0.
	3119	sij(:,:,:)=0.
	3120	!
[2469]	3121	IF (iflag_con.EQ.1) THEN
	3122	abort_message ='reactiver le call conlmd dans physiq.F'
	3123	CALL abort_physic (modname,abort_message,1)
[3435]	3124	! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q,
[2469]	3125	! . d_t_con, d_q_con,
	3126	! . rain_con, snow_con, ibas_con, itop_con)
	3127	ELSE IF (iflag_con.EQ.2) THEN
[3435]	3128	CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, &
[2469]	3129	conv_t, conv_q, -evap, omega, &
	3130	d_t_con, d_q_con, rain_con, snow_con, &
	3131	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	3132	kcbot, kctop, kdtop, pmflxr, pmflxs)
	3133	d_u_con = 0.
	3134	d_v_con = 0.
[879]	3135
[2469]	3136	WHERE (rain_con < 0.) rain_con = 0.
	3137	WHERE (snow_con < 0.) snow_con = 0.
	3138	DO i = 1, klon
	3139	ibas_con(i) = klev+1 - kcbot(i)
	3140	itop_con(i) = klev+1 - kctop(i)
	3141	ENDDO
	3142	ELSE IF (iflag_con.GE.3) THEN
	3143	! nb of tracers for the KE convection:
	3144	! MAF la partie traceurs est faite dans phytrac
	3145	! on met ntra=1 pour limiter les appels mais on peut
	3146	! supprimer les calculs / ftra.
	3147	ntra = 1
	3148
	3149	!=======================================================================
	3150	!ajout pour la parametrisation des poches froides: calcul de
[2635]	3151	!t_w et t_x: si pas de poches froides, t_w=t_x=t_seri
[2692]	3152	IF (iflag_wake>=1) THEN
	3153	DO k=1,klev
	3154	DO i=1,klon
	3155	t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k)
	3156	q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k)
	3157	t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	3158	q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
	3159	ENDDO
	3160	ENDDO
	3161	ELSE
[4056]	3162	t_w(:,:) = t_seri(:,:)
[2635]	3163	q_w(:,:) = q_seri(:,:)
	3164	t_x(:,:) = t_seri(:,:)
	3165	q_x(:,:) = q_seri(:,:)
[2692]	3166	ENDIF
[2469]	3167	!
	3168	!jyg<
	3169	! Perform dry adiabatic adjustment on wake profile
	3170	! The corresponding tendencies are added to the convective tendencies
	3171	! after the call to the convective scheme.
	3172	IF (iflag_wake>=1) then
[2882]	3173	IF (iflag_adjwk >= 1) THEN
[2469]	3174	limbas(:) = 1
[2635]	3175	CALL ajsec(paprs, pplay, t_w, q_w, limbas, &
[2309]	3176	d_t_adjwk, d_q_adjwk)
[2638]	3177	!
	3178	DO k=1,klev
	3179	DO i=1,klon
	3180	IF (wake_s(i) .GT. 1.e-3) THEN
	3181	t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k)
	3182	q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k)
	3183	d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k)
	3184	d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k)
	3185	ELSE
	3186	d_deltat_ajs_cv(i,k) = 0.
	3187	d_deltaq_ajs_cv(i,k) = 0.
	3188	ENDIF
	3189	ENDDO
[2469]	3190	ENDDO
[4516]	3191	IF (iflag_adjwk == 2 .AND. OK_bug_ajs_cv) THEN
[2882]	3192	CALL add_wake_tend &
[4744]	3193	(d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy)
[4516]	3194	ENDIF ! (iflag_adjwk == 2 .AND. OK_bug_ajs_cv)
[2882]	3195	ENDIF ! (iflag_adjwk >= 1)
[2469]	3196	ENDIF ! (iflag_wake>=1)
	3197	!>jyg
	3198	!
[2638]	3199
	3200	!! print *,'physiq. q_w(1,k), q_x(1,k) ', &
	3201	!! (k, q_w(1,k), q_x(1,k),k=1,25)
	3202
[2513]	3203	!jyg<
[3435]	3204	CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, &
[2513]	3205	alp_offset, it_wape_prescr, wape_prescr, fip_prescr, &
	3206	ale_bl_prescr, alp_bl_prescr, &
	3207	wake_pe, wake_fip, &
	3208	Ale_bl, Ale_bl_trig, Alp_bl, &
[2554]	3209	Ale, Alp , Ale_wake, Alp_wake)
[2513]	3210	!>jyg
	3211	!
[2469]	3212	! sb, oct02:
	3213	! Schema de convection modularise et vectorise:
	3214	! (driver commun aux versions 3 et 4)
	3215	!
	3216	IF (ok_cvl) THEN ! new driver for convectL
	3217	!
	3218	!jyg<
	3219	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	3220	! Calculate the upmost level of deep convection loops: k_upper_cv
	3221	! (near 22 km)
	3222	k_upper_cv = klev
[3199]	3223	!izero = klon/2+1/klon
	3224	!DO k = klev,1,-1
	3225	! IF (pphi(izero,k) > 22.e4) k_upper_cv = k
	3226	!ENDDO
	3227	! FH : nouveau calcul base sur un profil global sans quoi
	3228	! le modele etait sensible au decoupage de domaines
[2469]	3229	DO k = klev,1,-1
[3199]	3230	IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k
[2469]	3231	ENDDO
	3232	IF (prt_level .ge. 5) THEN
	3233	Print *, 'upmost level of deep convection loops: k_upper_cv = ', &
	3234	k_upper_cv
	3235	ENDIF
	3236	!
	3237	!>jyg
[4389]	3238	IF (type_trac == 'repr') THEN
[2469]	3239	nbtr_tmp=ntra
	3240	ELSE
	3241	nbtr_tmp=nbtr
[2692]	3242	ENDIF
[2469]	3243	!jyg iflag_con est dans clesphys
	3244	!c CALL concvl (iflag_con,iflag_clos,
	3245	CALL concvl (iflag_clos, &
[3435]	3246	phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, &
[2635]	3247	t_w,q_w,wake_s, &
[2469]	3248	u_seri,v_seri,tr_seri,nbtr_tmp, &
	3249	ALE,ALP, &
	3250	sig1,w01, &
[4613]	3251	d_t_con,d_q_con,fqcomp,d_u_con,d_v_con,d_tr, &
[2469]	3252	rain_con, snow_con, ibas_con, itop_con, sigd, &
[2824]	3253	ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, &
[3496]	3254	Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, &
[2469]	3255	pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, &
	3256	! RomP >>>
	3257	!! . pmflxr,pmflxs,da,phi,mp,
	3258	!! . ftd,fqd,lalim_conv,wght_th)
[3496]	3259	pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, &
[2469]	3260	ftd,fqd,lalim_conv,wght_th, &
	3261	ev, ep,epmlmMm,eplaMm, &
[4613]	3262	wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv,detrain_cv, &
[2481]	3263	tau_cld_cv,coefw_cld_cv,epmax_diag)
[2630]	3264
[2469]	3265	! RomP <<<
[619]	3266
[2469]	3267	!IM begin
	3268	! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1),
	3269	! .dnwd0(1,1),ftd(1,1),fqd(1,1)
	3270	!IM end
	3271	!IM cf. FH
	3272	clwcon0=qcondc
	3273	pmfu(:,:)=upwd(:,:)+dnwd(:,:)
[4613]	3274	fm_cv(:,:)=upwd(:,:)+dnwd(:,:)+dnwd0(:,:)
[3150]	3275	!
	3276	!jyg<
	3277	! If convective tendencies are too large, then call convection
	3278	! every time step
	3279	cvpas = cvpas_0
	3280	DO k=1,k_upper_cv
	3281	DO i=1,klon
[3161]	3282	IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.&
	3283	d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN
	3284	dtcon_multistep_max = 3.
	3285	dqcon_multistep_max = 0.02
	3286	ENDIF
	3287	ENDDO
	3288	ENDDO
	3289	!
	3290	DO k=1,k_upper_cv
	3291	DO i=1,klon
[3150]	3292	!! IF (abs(d_t_con(i,k)) > 0.24 .OR. &
	3293	!! abs(d_q_con(i,k)) > 2.e-2) THEN
	3294	IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. &
	3295	abs(d_q_con(i,k)) > dqcon_multistep_max) THEN
	3296	cvpas = 1
	3297	!! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', &
	3298	!! i,k,d_t_con(i,k),d_q_con(i,k)
	3299	ENDIF
	3300	ENDDO
	3301	ENDDO
[3153]	3302	!!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg)
	3303	!!! call bcast(cvpas)
	3304	!!! ------------------------------------------------------------
[3150]	3305	!>jyg
	3306	!
[2692]	3307	DO i = 1, klon
[3148]	3308	IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas
[2692]	3309	ENDDO
[2469]	3310	!
	3311	!jyg<
	3312	! Add the tendency due to the dry adjustment of the wake profile
	3313	IF (iflag_wake>=1) THEN
[2882]	3314	IF (iflag_adjwk == 2) THEN
	3315	DO k=1,klev
	3316	DO i=1,klon
[3435]	3317	ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep
	3318	fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep
[2882]	3319	d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k)
	3320	d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k)
	3321	ENDDO
	3322	ENDDO
	3323	ENDIF ! (iflag_adjwk = 2)
	3324	ENDIF ! (iflag_wake>=1)
[2469]	3325	!>jyg
	3326	!
	3327	ELSE ! ok_cvl
[1412]	3328
[2469]	3329	! MAF conema3 ne contient pas les traceurs
[3435]	3330	CALL conema3 (phys_tstep, &
[2469]	3331	paprs,pplay,t_seri,q_seri, &
	3332	u_seri,v_seri,tr_seri,ntra, &
	3333	sig1,w01, &
	3334	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	3335	rain_con, snow_con, ibas_con, itop_con, &
	3336	upwd,dnwd,dnwd0,bas,top, &
	3337	Ma,cape,tvp,rflag, &
	3338	pbase &
	3339	,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr &
	3340	,clwcon0)
[524]	3341
[2469]	3342	ENDIF ! ok_cvl
[524]	3343
[2469]	3344	!
	3345	! Correction precip
	3346	rain_con = rain_con * cvl_corr
	3347	snow_con = snow_con * cvl_corr
	3348	!
[766]	3349
[2469]	3350	IF (.NOT. ok_gust) THEN
	3351	do i = 1, klon
	3352	wd(i)=0.0
	3353	enddo
	3354	ENDIF
[524]	3355
[2469]	3356	! =================================================================== c
	3357	! Calcul des proprietes des nuages convectifs
	3358	!
[524]	3359
[2469]	3360	! calcul des proprietes des nuages convectifs
	3361	clwcon0(:,:)=fact_cldcon*clwcon0(:,:)
	3362	IF (iflag_cld_cv == 0) THEN
[2692]	3363	CALL clouds_gno &
[2469]	3364	(klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0)
	3365	ELSE
[2692]	3366	CALL clouds_bigauss &
[2469]	3367	(klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0)
	3368	ENDIF
[524]	3369
[2205]	3370
[2469]	3371	! =================================================================== c
[524]	3372
[2469]	3373	DO i = 1, klon
	3374	itop_con(i) = min(max(itop_con(i),1),klev)
	3375	ibas_con(i) = min(max(ibas_con(i),1),itop_con(i))
	3376	ENDDO
[1428]	3377
[2469]	3378	DO i = 1, klon
[4056]	3379	! C Risi modif: pour éviter pb de dépassement d'indice dans les cas
	3380	! où i n'est pas un point convectif et donc ibas_con(i)=0
	3381	! c'est un pb indépendant des isotopes
	3382	if (ibas_con(i) > 0) then
	3383	ema_pcb(i) = paprs(i,ibas_con(i))
	3384	else
	3385	ema_pcb(i) = 0.0
	3386	endif
[2469]	3387	ENDDO
	3388	DO i = 1, klon
	3389	! L'idicage de itop_con peut cacher un pb potentiel
	3390	! FH sous la dictee de JYG, CR
	3391	ema_pct(i) = paprs(i,itop_con(i)+1)
[879]	3392
[2692]	3393	IF (itop_con(i).gt.klev-3) THEN
	3394	IF (prt_level >= 9) THEN
[2469]	3395	write(lunout,*)'La convection monte trop haut '
	3396	write(lunout,*)'itop_con(,',i,',)=',itop_con(i)
[2692]	3397	ENDIF
	3398	ENDIF
[2469]	3399	ENDDO
	3400	ELSE IF (iflag_con.eq.0) THEN
	3401	write(lunout,*) 'On n appelle pas la convection'
	3402	clwcon0=0.
	3403	rnebcon0=0.
	3404	d_t_con=0.
	3405	d_q_con=0.
	3406	d_u_con=0.
	3407	d_v_con=0.
	3408	rain_con=0.
	3409	snow_con=0.
	3410	bas=1
	3411	top=1
	3412	ELSE
	3413	WRITE(lunout,*) "iflag_con non-prevu", iflag_con
[2692]	3414	CALL abort_physic("physiq", "", 1)
[2469]	3415	ENDIF
[524]	3416
[4742]	3417	!--saving d_q_con * zmass for next timestep if convection is not called every timestep
	3418	IF (ok_conserv_d_q_con) THEN
	3419	d_q_con_zmasse(:,:) = d_q_con(:,:) * zmasse(:,:)
	3420	ENDIF
	3421
[2469]	3422	! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri,
	3423	! . d_u_con, d_v_con)
[524]	3424
[2730]	3425	!jyg Reinitialize proba_notrig and itapcv when convection has been called
	3426	proba_notrig(:) = 1.
[2707]	3427	itapcv = 0
[3150]	3428	ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0)
[2730]	3429	!
[2707]	3430	itapcv = itapcv+1
[3153]	3431	!
	3432	! Compter les steps ou cvpas=1
	3433	IF (cvpas == 1) THEN
	3434	Ncvpaseq1 = Ncvpaseq1+1
	3435	ENDIF
	3436	IF (mod(itap,1000) == 0) THEN
	3437	print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
	3438	ENDIF
[2707]	3439
[2812]	3440	!!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de
	3441	!!! l'energie dans les courants satures.
	3442	!! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime
	3443	!! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime
	3444	!! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:)
	3445	!! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, &
	3446	!! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,&
	3447	!! itap, 1)
	3448	!! call prt_enerbil('convection_sat',itap)
	3449	!!
	3450	!!
[4742]	3451
	3452	!--recompute d_q_con with zmasse from new timestep
	3453	IF (ok_conserv_d_q_con) THEN
	3454	d_q_con(:,:)=d_q_con_zmasse(:,:)/zmasse(:,:)
	3455	ENDIF
	3456
[4523]	3457	CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, dqbs0, paprs, &
[2812]	3458	'convection',abortphy,flag_inhib_tend,itap,0)
[3461]	3459	CALL prt_enerbil('convection',itap)
[2235]	3460
[2469]	3461	!-------------------------------------------------------------------------
[766]	3462
[2692]	3463	IF (mydebug) THEN
	3464	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3465	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3466	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3467	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3468	ENDIF
[766]	3469
[2469]	3470	!
	3471	!==========================================================================
	3472	!RR:Evolution de la poche froide: on ne fait pas de separation wake/env
	3473	!pour la couche limite diffuse pour l instant
	3474	!
	3475	!
	3476	! nrlmd le 22/03/2011---Si on met les poches hors des thermiques
	3477	! il faut rajouter cette tendance calcul\'ee hors des poches
	3478	! froides
	3479	!
[2692]	3480	IF (iflag_wake>=1) THEN
[2707]	3481	!
	3482	!
[2730]	3483	! Call wakes every "wkpas" step
	3484	!
	3485	IF (MOD(itapwk,wkpas).EQ.0) THEN
	3486	!
	3487	DO k=1,klev
[2469]	3488	DO i=1,klon
[2730]	3489	dt_dwn(i,k) = ftd(i,k)
	3490	dq_dwn(i,k) = fqd(i,k)
	3491	M_dwn(i,k) = dnwd0(i,k)
	3492	M_up(i,k) = upwd(i,k)
[3435]	3493	dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k)
	3494	dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k)
[2469]	3495	ENDDO
	3496	ENDDO
[2730]	3497
	3498	IF (iflag_wake==2) THEN
	3499	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3500	DO k = 1,klev
	3501	dt_dwn(:,k)= dt_dwn(:,k)+ &
[3435]	3502	ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep
[2730]	3503	dq_dwn(:,k)= dq_dwn(:,k)+ &
[3435]	3504	ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep
[2730]	3505	ENDDO
	3506	ELSEIF (iflag_wake==3) THEN
	3507	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3508	DO k = 1,klev
	3509	DO i=1,klon
	3510	IF (rneb(i,k)==0.) THEN
	3511	! On ne tient compte des tendances qu'en dehors des
	3512	! nuages (c'est-\`a-dire a priri dans une region ou
	3513	! l'eau se reevapore).
	3514	dt_dwn(i,k)= dt_dwn(i,k)+ &
[3435]	3515	ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep
[2730]	3516	dq_dwn(i,k)= dq_dwn(i,k)+ &
[3435]	3517	ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep
[2730]	3518	ENDIF
	3519	ENDDO
	3520	ENDDO
	3521	ENDIF
	3522
	3523	!
	3524	!calcul caracteristiques de la poche froide
[3435]	3525	CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, &
[2730]	3526	t_seri, q_seri, omega, &
	3527	dt_dwn, dq_dwn, M_dwn, M_up, &
[3208]	3528	dt_a, dq_a, cv_gen, &
	3529	sigd, cin, &
[4744]	3530	wake_deltat, wake_deltaq, wake_s, awake_s, wake_dens, awake_dens, &
[2730]	3531	wake_dth, wake_h, &
[3000]	3532	!! wake_pe, wake_fip, wake_gfl, &
	3533	wake_pe, wake_fip_0, wake_gfl, & !! jyg
[2730]	3534	d_t_wake, d_q_wake, &
	3535	wake_k, t_x, q_x, &
	3536	wake_omgbdth, wake_dp_omgb, &
	3537	wake_dtKE, wake_dqKE, &
	3538	wake_omg, wake_dp_deltomg, &
	3539	wake_spread, wake_Cstar, d_deltat_wk_gw, &
[4744]	3540	d_deltat_wk, d_deltaq_wk, d_s_wk, d_s_a_wk, d_dens_wk, d_dens_a_wk)
[2730]	3541	!
	3542	!jyg Reinitialize itapwk when wakes have been called
	3543	itapwk = 0
	3544	ENDIF ! (MOD(itapwk,wkpas).EQ.0)
[2469]	3545	!
[2730]	3546	itapwk = itapwk+1
[2469]	3547	!
	3548	!-----------------------------------------------------------------------
	3549	! ajout des tendances des poches froides
[4523]	3550	CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,dqbs0,paprs,'wake', &
[2812]	3551	abortphy,flag_inhib_tend,itap,0)
[3461]	3552	CALL prt_enerbil('wake',itap)
[2469]	3553	!------------------------------------------------------------------------
[879]	3554
[2730]	3555	! Increment Wake state variables
[2635]	3556	IF (iflag_wake_tend .GT. 0.) THEN
	3557
	3558	CALL add_wake_tend &
[4744]	3559	(d_deltat_wk, d_deltaq_wk, d_s_wk, d_s_a_wk, d_dens_wk, d_dens_a_wk, wake_k, &
[2635]	3560	'wake', abortphy)
[3461]	3561	CALL prt_enerbil('wake',itap)
[2635]	3562	ENDIF ! (iflag_wake_tend .GT. 0.)
[3179]	3563	!
	3564	IF (prt_level .GE. 10) THEN
	3565	print *,' physiq, after calwake, wake_s: ',wake_s(:)
	3566	print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1)
	3567	print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1)
	3568	ENDIF
[2635]	3569
[3000]	3570	IF (iflag_alp_wk_cond .GT. 0.) THEN
	3571
[3435]	3572	CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, &
[3000]	3573	wake_fip)
	3574	ELSE
	3575	wake_fip(:) = wake_fip_0(:)
	3576	ENDIF ! (iflag_alp_wk_cond .GT. 0.)
	3577
[2692]	3578	ENDIF ! (iflag_wake>=1)
[2469]	3579	!
	3580	!===================================================================
	3581	! Convection seche (thermiques ou ajustement)
	3582	!===================================================================
	3583	!
[2692]	3584	CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri &
[2469]	3585	,seuil_inversion,weak_inversion,dthmin)
[878]	3586
	3587
	3588
[2469]	3589	d_t_ajsb(:,:)=0.
	3590	d_q_ajsb(:,:)=0.
	3591	d_t_ajs(:,:)=0.
	3592	d_u_ajs(:,:)=0.
	3593	d_v_ajs(:,:)=0.
	3594	d_q_ajs(:,:)=0.
	3595	clwcon0th(:,:)=0.
	3596	!
	3597	! fm_therm(:,:)=0.
	3598	! entr_therm(:,:)=0.
	3599	! detr_therm(:,:)=0.
	3600	!
[2692]	3601	IF (prt_level>9) WRITE(lunout,*) &
[2469]	3602	'AVANT LA CONVECTION SECHE , iflag_thermals=' &
	3603	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[2692]	3604	IF (iflag_thermals<0) THEN
[2469]	3605	! Rien
	3606	! ====
[2692]	3607	IF (prt_level>9) WRITE(lunout,*)'pas de convection seche'
[4657]	3608	WRITE(lunout,*) 'WARNING : running without dry convection. Somme intermediate variables are not properly defined in physiq_mod.F90'
	3609	! Reprendre proprement les initialisation ci dessouds si on veut vraiment utiliser l'option (FH)
	3610	fraca(:,:)=0.
	3611	fm_therm(:,:)=0.
	3612	ztv(:,:)=t_seri(:,:)
	3613	zqasc(:,:)=q_seri(:,:)
	3614	ztla(:,:)=0.
	3615	zthl(:,:)=0.
	3616	zpspsk(:,:)=(pplay(:,:)/100000.)**RKAPPA
[541]	3617
[878]	3618
[4657]	3619
[2692]	3620	ELSE
[878]	3621
[2469]	3622	! Thermiques
	3623	! ==========
[2692]	3624	IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' &
[2469]	3625	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[878]	3626
	3627
[2469]	3628	!cc nrlmd le 10/04/2012
	3629	DO k=1,klev+1
	3630	DO i=1,klon
	3631	pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce)
	3632	pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter)
	3633	pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic)
	3634	pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic)
[2159]	3635	ENDDO
[2469]	3636	ENDDO
	3637	!cc fin nrlmd le 10/04/2012
[1403]	3638
[2692]	3639	IF (iflag_thermals>=1) THEN
[4690]	3640
	3641	! Tests Fredho, instensibilite au pas de temps -------------------------------
	3642	! A detruire en 2024 une fois les tests documentes et les choix faits !
	3643	if (iflag_thermals_tenv /10 == 0 ) then !
	3644	do k=1,klev !
	3645	do i=1,klon !
	3646	t_env(i,k)=t_seri(i,k) !
	3647	q_env(i,k)=q_seri(i,k) !
	3648	enddo !
	3649	enddo !
	3650	else if (iflag_thermals_tenv / 10 == 2 ) then !
	3651	do k=1,klev !
	3652	do i=1,klon !
	3653	q_env(i,k)=q_seri(i,k) !
	3654	enddo !
	3655	enddo !
	3656	else if (iflag_thermals_tenv / 10 == 3 ) then !
	3657	do k=1,klev !
	3658	do i=1,klon !
	3659	t_env(i,k)=t(i,k) !
	3660	q_env(i,k)=qx(i,k,1) !
	3661	enddo !
	3662	enddo !
	3663	endif !
	3664	! Tests Fredho, instensibilite au pas de temps ------------------------------
	3665
[2469]	3666	!jyg<
[2852]	3667	!! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
[4690]	3668	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3669	! Appel des thermiques avec les profils exterieurs aux poches
	3670	DO k=1,klev
	3671	DO i=1,klon
	3672	t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	3673	q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
[4690]	3674	t_env(i,k) = t_env(i,k) - wake_s(i)*wake_deltat(i,k)
	3675	q_env(i,k) = q_env(i,k) - wake_s(i)*wake_deltaq(i,k)
[2606]	3676	u_therm(i,k) = u_seri(i,k)
	3677	v_therm(i,k) = v_seri(i,k)
[2469]	3678	ENDDO
	3679	ENDDO
	3680	ELSE
	3681	! Appel des thermiques avec les profils moyens
	3682	DO k=1,klev
	3683	DO i=1,klon
	3684	t_therm(i,k) = t_seri(i,k)
	3685	q_therm(i,k) = q_seri(i,k)
[2606]	3686	u_therm(i,k) = u_seri(i,k)
	3687	v_therm(i,k) = v_seri(i,k)
[2469]	3688	ENDDO
	3689	ENDDO
	3690	ENDIF
	3691	!>jyg
[2692]	3692	CALL calltherm(pdtphys &
[2469]	3693	,pplay,paprs,pphi,weak_inversion &
[2606]	3694	! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg
[4690]	3695	,u_therm,v_therm,t_therm,q_therm,t_env,q_env,zqsat,debut & !jyg
[2469]	3696	,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs &
	3697	,fm_therm,entr_therm,detr_therm &
	3698	,zqasc,clwcon0th,lmax_th,ratqscth &
	3699	,ratqsdiff,zqsatth &
	3700	!on rajoute ale et alp, et les
	3701	!caracteristiques de la couche alim
	3702	,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca &
	3703	,ztv,zpspsk,ztla,zthl &
	3704	!cc nrlmd le 10/04/2012
	3705	,pbl_tke_input,pctsrf,omega,cell_area &
	3706	,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 &
[4843]	3707	,n2,s2,strig,zcong,ale_bl_stat &
[2469]	3708	,therm_tke_max,env_tke_max &
	3709	,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke &
	3710	,alp_bl_conv,alp_bl_stat &
	3711	!cc fin nrlmd le 10/04/2012
	3712	,zqla,ztva )
	3713	!
	3714	!jyg<
[2852]	3715	!!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3716	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3717	! Si les thermiques ne sont presents que hors des
	3718	! poches, la tendance moyenne associ\'ee doit etre
	3719	! multipliee par la fraction surfacique qu'ils couvrent.
	3720	DO k=1,klev
	3721	DO i=1,klon
	3722	!
[2635]	3723	d_deltat_the(i,k) = - d_t_ajs(i,k)
	3724	d_deltaq_the(i,k) = - d_q_ajs(i,k)
[2469]	3725	!
	3726	d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i))
	3727	d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i))
	3728	d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i))
	3729	d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i))
	3730	!
	3731	ENDDO
	3732	ENDDO
[2606]	3733	!
[3180]	3734	IF (ok_bug_split_th) THEN
	3735	CALL add_wake_tend &
[4744]	3736	(d_deltat_the, d_deltaq_the, dsig0, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy)
[3180]	3737	ELSE
	3738	CALL add_wake_tend &
[4744]	3739	(d_deltat_the, d_deltaq_the, dsig0, dsig0, ddens0, ddens0, wake_k, 'the', abortphy)
[3180]	3740	ENDIF
[3461]	3741	CALL prt_enerbil('the',itap)
[2638]	3742	!
[2852]	3743	ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1)
[2638]	3744	!
[2606]	3745	CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, &
[4523]	3746	dql0,dqi0,dqbs0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0)
[3461]	3747	CALL prt_enerbil('thermals',itap)
[2606]	3748	!
[2513]	3749	!
[3435]	3750	CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, &
[4843]	3751	cin, s2, n2, strig, &
[2513]	3752	ale_bl_trig, ale_bl_stat, ale_bl, &
[2556]	3753	alp_bl, alp_bl_stat, &
[3208]	3754	proba_notrig, random_notrig, cv_gen)
[2635]	3755	!>jyg
[1638]	3756
[2554]	3757	! ------------------------------------------------------------------
	3758	! Transport de la TKE par les panaches thermiques.
	3759	! FH : 2010/02/01
[4822]	3760	if (iflag_thermcell_tke==1) then
	3761	call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm,rg,paprs,pbl_tke)
	3762	endif
[2554]	3763	! -------------------------------------------------------------------
	3764
[2692]	3765	DO i=1,klon
[2469]	3766	! zmax_th(i)=pphi(i,lmax_th(i))/rg
	3767	!CR:04/05/12:correction calcul zmax
	3768	zmax_th(i)=zmax0(i)
[2692]	3769	ENDDO
[1507]	3770
[2692]	3771	ENDIF
[878]	3772
[2469]	3773	! Ajustement sec
	3774	! ==============
[878]	3775
[2469]	3776	! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement
	3777	! a partir du sommet des thermiques.
	3778	! Dans le cas contraire, on demarre au niveau 1.
[878]	3779
[2692]	3780	IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN
[878]	3781
[2692]	3782	IF (iflag_thermals.eq.0) THEN
	3783	IF (prt_level>9) WRITE(lunout,*)'ajsec'
[2469]	3784	limbas(:)=1
[2692]	3785	ELSE
[2469]	3786	limbas(:)=lmax_th(:)
[2692]	3787	ENDIF
[878]	3788
[2469]	3789	! Attention : le call ajsec_convV2 n'est maintenu que momentanneement
	3790	! pour des test de convergence numerique.
	3791	! Le nouveau ajsec est a priori mieux, meme pour le cas
	3792	! iflag_thermals = 0 (l'ancienne version peut faire des tendances
	3793	! non nulles numeriquement pour des mailles non concernees.
[878]	3794
[2692]	3795	IF (iflag_thermals==0) THEN
[2469]	3796	! Calling adjustment alone (but not the thermal plume model)
	3797	CALL ajsec_convV2(paprs, pplay, t_seri,q_seri &
	3798	, d_t_ajsb, d_q_ajsb)
[2692]	3799	ELSE IF (iflag_thermals>0) THEN
[2469]	3800	! Calling adjustment above the top of thermal plumes
	3801	CALL ajsec(paprs, pplay, t_seri,q_seri,limbas &
	3802	, d_t_ajsb, d_q_ajsb)
[2692]	3803	ENDIF
[878]	3804
[2469]	3805	!--------------------------------------------------------------------
	3806	! ajout des tendances de l'ajustement sec ou des thermiques
[4523]	3807	CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,dqbs0,paprs, &
[2812]	3808	'ajsb',abortphy,flag_inhib_tend,itap,0)
[3461]	3809	CALL prt_enerbil('ajsb',itap)
[2469]	3810	d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:)
	3811	d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:)
[904]	3812
[2469]	3813	!---------------------------------------------------------------------
[878]	3814
[2692]	3815	ENDIF
[524]	3816
[2692]	3817	ENDIF
[2469]	3818	!
	3819	!===================================================================
	3820	! Computation of ratqs, the width (normalized) of the subrid scale
	3821	! water distribution
[4009]	3822
	3823	l_mix_ave(:,:)=0.
	3824	wprime_ave(:,:)=0.
	3825
	3826	DO nsrf = 1, nbsrf
	3827	DO i = 1, klon
	3828	l_mix_ave(i,:) = l_mix_ave(i,:) + l_mix(i,:,nsrf)*pctsrf(i,nsrf)
	3829	wprime_ave(i,:) = wprime_ave(i,:) + wprime(i,:,nsrf)*pctsrf(i,nsrf)
	3830	ENDDO
	3831	ENDDO
	3832
[4613]	3833	CALL ratqs_main(klon,klev,nbsrf,prt_level,lunout, &
[2469]	3834	iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, &
[2534]	3835	ratqsbas,ratqshaut,ratqsp0, ratqsdp, &
[4613]	3836	pctsrf,s_pblh,zstd, &
[3856]	3837	tau_ratqs,fact_cldcon,wake_s, wake_deltaq, &
[2469]	3838	ptconv,ptconvth,clwcon0th, rnebcon0th, &
[4613]	3839	paprs,pplay,t_seri,q_seri, &
	3840	qtc_cv, sigt_cv,detrain_cv,fm_cv,fqd,fqcomp,sigd,zqsat, &
[4881]	3841	omega,pbl_tke(:,:,is_ave),pbl_eps(:,:,is_ave),l_mix_ave,wprime_ave, &
[4613]	3842	t2m,q2m,fm_therm,entr_therm,detr_therm,cell_area, &
	3843	ratqs,ratqsc,ratqs_inter_)
[1032]	3844
[2469]	3845	!
	3846	! Appeler le processus de condensation a grande echelle
	3847	! et le processus de precipitation
	3848	!-------------------------------------------------------------------------
	3849	IF (prt_level .GE.10) THEN
	3850	print *,'itap, ->fisrtilp ',itap
	3851	ENDIF
[4056]	3852	!
[3999]	3853
	3854	picefra(:,:)=0.
	3855
	3856	IF (ok_new_lscp) THEN
	3857
[4062]	3858	!--mise à jour de flight_m et flight_h2o dans leur module
[4951]	3859	!IF (ok_plane_h2o .OR. ok_plane_contrail) THEN
	3860	! CALL airplane(debut,pphis,pplay,paprs,t_seri)
	3861	!ENDIF
[4059]	3862
[4380]	3863	CALL lscp(klon,klev,phys_tstep,missing_val,paprs,pplay, &
[5203]	3864	t_seri, q_seri,qs_ini,ptconv,ratqs, &
[4951]	3865	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, rneblsvol, &
[5202]	3866	pfraclr, pfracld, cldfraliq, sigma2_icefracturb, mean_icefracturb, &
[4412]	3867	radocond, picefra, rain_lsc, snow_lsc, &
[3999]	3868	frac_impa, frac_nucl, beta_prec_fisrt, &
	3869	prfl, psfl, rhcl, &
	3870	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
[5202]	3871	iflag_ice_thermo, distcltop, temp_cltop, &
	3872	pbl_tke(:,:,is_ave), pbl_eps(:,:,is_ave), &
	3873	cell_area, &
	3874	cf_seri, rvc_seri, u_seri, v_seri, &
[4951]	3875	qsub, qissr, qcld, subfra, issrfra, gamma_cond, ratio_qi_qtot, &
	3876	dcf_sub, dcf_con, dcf_mix, dqi_adj, dqi_sub, dqi_con, dqi_mix, &
	3877	dqvc_adj, dqvc_sub, dqvc_con, dqvc_mix, qsatliq, qsatice, &
	3878	Tcontr, qcontr, qcontr2, fcontrN, fcontrP, &
	3879	dcf_avi, dqi_avi, dqvc_avi, flight_dist, flight_h2o, &
[4803]	3880	cloudth_sth,cloudth_senv,cloudth_sigmath,cloudth_sigmaenv, &
[4830]	3881	qraindiag, qsnowdiag, dqreva, dqssub, dqrauto, dqrcol, dqrmelt, &
[4819]	3882	dqrfreez, dqsauto, dqsagg, dqsrim, dqsmelt, dqsfreez)
[3999]	3883
[4651]	3884
[3999]	3885	ELSE
[4059]	3886
[4666]	3887	CALL fisrtilp(klon,klev,phys_tstep,paprs,pplay, &
[2469]	3888	t_seri, q_seri,ptconv,ratqs, &
[4666]	3889	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, rneblsvol, radocond, &
[2469]	3890	rain_lsc, snow_lsc, &
	3891	pfrac_impa, pfrac_nucl, pfrac_1nucl, &
	3892	frac_impa, frac_nucl, beta_prec_fisrt, &
	3893	prfl, psfl, rhcl, &
	3894	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
[4666]	3895	iflag_ice_thermo, &
	3896	cloudth_sth,cloudth_senv,cloudth_sigmath,cloudth_sigmaenv)
[4059]	3897
[3999]	3898	ENDIF
[4056]	3899	!
[2469]	3900	WHERE (rain_lsc < 0) rain_lsc = 0.
	3901	WHERE (snow_lsc < 0) snow_lsc = 0.
[766]	3902
[2799]	3903	!+JLD
	3904	! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc &
	3905	! & ,((rcw-rcpd)rain_lsc + (rcs-rcpd)snow_lsc)t_seri(1,1)-rlvttrain_lsc+rlstt*snow_lsc &
	3906	! & ,rain_lsc,snow_lsc
	3907	! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1)
	3908	!-JLD
[4523]	3909	CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,dqbs0,paprs, &
[2812]	3910	'lsc',abortphy,flag_inhib_tend,itap,0)
[3461]	3911	CALL prt_enerbil('lsc',itap)
[2613]	3912	rain_num(:)=0.
[2657]	3913	DO k = 1, klev
[2613]	3914	DO i = 1, klon
	3915	IF (ql_seri(i,k)>oliqmax) THEN
	3916	rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys
	3917	ql_seri(i,k)=oliqmax
	3918	ENDIF
	3919	ENDDO
	3920	ENDDO
[4098]	3921	IF (nqo >= 3) THEN
[2657]	3922	DO k = 1, klev
	3923	DO i = 1, klon
	3924	IF (qs_seri(i,k)>oicemax) THEN
	3925	rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys
	3926	qs_seri(i,k)=oicemax
	3927	ENDIF
	3928	ENDDO
	3929	ENDDO
	3930	ENDIF
[2613]	3931
[4523]	3932
	3933	!---------------------------------------------------------------------------
[2469]	3934	DO k = 1, klev
	3935	DO i = 1, klon
	3936	cldfra(i,k) = rneb(i,k)
	3937	!CR: a quoi ca sert? Faut-il ajouter qs_seri?
[4523]	3938	!EV: en effet etrange, j'ajouterais aussi qs_seri
	3939	! plus largement, je nettoierais (enleverrais) ces lignes
[4412]	3940	IF (.NOT.new_oliq) radocond(i,k) = ql_seri(i,k)
[2469]	3941	ENDDO
	3942	ENDDO
[4523]	3943
	3944
	3945	! Option to activate the radiative effect of blowing snow (ok_rad_bs)
	3946	! makes sense only if the new large scale condensation scheme is active
	3947	! with the ok_icefra_lscp flag active as well
	3948
	3949	IF (ok_bs .AND. ok_rad_bs) THEN
	3950	IF (ok_new_lscp .AND. ok_icefra_lscp) THEN
	3951	DO k=1,klev
	3952	DO i=1,klon
	3953	radocond(i,k)=radocond(i,k)+qbs_seri(i,k)
	3954	picefra(i,k)=(radocond(i,k)*picefra(i,k)+qbs_seri(i,k))/(radocond(i,k))
	3955	qbsfra=min(qbs_seri(i,k)/qbst_bs,1.0)
	3956	cldfra(i,k)=max(cldfra(i,k),qbsfra)
	3957	ENDDO
	3958	ENDDO
	3959	ELSE
	3960	WRITE(lunout,*)"PAY ATTENTION, you try to activate the radiative effect of blowing snow"
	3961	WRITE(lunout,*)"with ok_new_lscp=false and/or ok_icefra_lscp=false"
	3962	abort_message='inconsistency in cloud phase for blowing snow'
	3963	CALL abort_physic(modname,abort_message,1)
	3964	ENDIF
	3965
	3966	ENDIF
	3967
[2692]	3968	IF (mydebug) THEN
	3969	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3970	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3971	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3972	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3973	ENDIF
[524]	3974
[2469]	3975	!
	3976	!-------------------------------------------------------------------
	3977	! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT
	3978	!-------------------------------------------------------------------
[524]	3979
[2469]	3980	! 1. NUAGES CONVECTIFS
	3981	!
	3982	!IM cf FH
	3983	! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke
	3984	IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke
	3985	snow_tiedtke=0.
	3986	! print*,'avant calcul de la pseudo precip '
	3987	! print*,'iflag_cld_th',iflag_cld_th
[2692]	3988	IF (iflag_cld_th.eq.-1) THEN
[2469]	3989	rain_tiedtke=rain_con
[2692]	3990	ELSE
[2469]	3991	! print*,'calcul de la pseudo precip '
	3992	rain_tiedtke=0.
	3993	! print*,'calcul de la pseudo precip 0'
[2692]	3994	DO k=1,klev
	3995	DO i=1,klon
	3996	IF (d_q_con(i,k).lt.0.) THEN
[2469]	3997	rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys &
	3998	*(paprs(i,k)-paprs(i,k+1))/rg
[2692]	3999	ENDIF
	4000	ENDDO
	4001	ENDDO
	4002	ENDIF
[2469]	4003	!
	4004	! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ')
	4005	!
[524]	4006
[2469]	4007	! Nuages diagnostiques pour Tiedtke
	4008	CALL diagcld1(paprs,pplay, &
	4009	!IM cf FH. rain_con,snow_con,ibas_con,itop_con,
	4010	rain_tiedtke,snow_tiedtke,ibas_con,itop_con, &
	4011	diafra,dialiq)
	4012	DO k = 1, klev
	4013	DO i = 1, klon
	4014	IF (diafra(i,k).GT.cldfra(i,k)) THEN
[4412]	4015	radocond(i,k) = dialiq(i,k)
[2469]	4016	cldfra(i,k) = diafra(i,k)
	4017	ENDIF
	4018	ENDDO
	4019	ENDDO
[524]	4020
[2469]	4021	ELSE IF (iflag_cld_th.ge.3) THEN
	4022	! On prend pour les nuages convectifs le max du calcul de la
	4023	! convection et du calcul du pas de temps precedent diminue d'un facteur
	4024	! facttemps
	4025	facteur = pdtphys *facttemps
[2692]	4026	DO k=1,klev
	4027	DO i=1,klon
[2469]	4028	rnebcon(i,k)=rnebcon(i,k)*facteur
[2692]	4029	IF (rnebcon0(i,k)clwcon0(i,k).GT.rnebcon(i,k)clwcon(i,k)) THEN
[2469]	4030	rnebcon(i,k)=rnebcon0(i,k)
	4031	clwcon(i,k)=clwcon0(i,k)
[2692]	4032	ENDIF
	4033	ENDDO
	4034	ENDDO
[2469]	4035
	4036	! On prend la somme des fractions nuageuses et des contenus en eau
[524]	4037
[2692]	4038	IF (iflag_cld_th>=5) THEN
[1411]	4039
[2692]	4040	DO k=1,klev
[2469]	4041	ptconvth(:,k)=fm_therm(:,k+1)>0.
[2692]	4042	ENDDO
[1496]	4043
[2692]	4044	IF (iflag_coupl==4) THEN
[1496]	4045
[2469]	4046	! Dans le cas iflag_coupl==4, on prend la somme des convertures
	4047	! convectives et lsc dans la partie des thermiques
	4048	! Le controle par iflag_coupl est peut etre provisoire.
[2692]	4049	DO k=1,klev
	4050	DO i=1,klon
	4051	IF (ptconv(i,k).AND.ptconvth(i,k)) THEN
[4412]	4052	radocond(i,k)=radocond(i,k)+rnebcon(i,k)*clwcon(i,k)
[2469]	4053	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[2692]	4054	ELSE IF (ptconv(i,k)) THEN
[2469]	4055	cldfra(i,k)=rnebcon(i,k)
[4412]	4056	radocond(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	4057	ENDIF
	4058	ENDDO
	4059	ENDDO
[1496]	4060
[2692]	4061	ELSE IF (iflag_coupl==5) THEN
	4062	DO k=1,klev
	4063	DO i=1,klon
[2469]	4064	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[4412]	4065	radocond(i,k)=radocond(i,k)+rnebcon(i,k)*clwcon(i,k)
[2692]	4066	ENDDO
	4067	ENDDO
[1525]	4068
[2692]	4069	ELSE
[1525]	4070
[2469]	4071	! Si on est sur un point touche par la convection
	4072	! profonde et pas par les thermiques, on prend la
	4073	! couverture nuageuse et l'eau nuageuse de la convection
	4074	! profonde.
[1411]	4075
[2469]	4076	!IM/FH: 2011/02/23
	4077	! definition des points sur lesquels ls thermiques sont actifs
[1496]	4078
[2692]	4079	DO k=1,klev
	4080	DO i=1,klon
	4081	IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN
[2469]	4082	cldfra(i,k)=rnebcon(i,k)
[4412]	4083	radocond(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	4084	ENDIF
	4085	ENDDO
	4086	ENDDO
[1496]	4087
[2692]	4088	ENDIF
[1496]	4089
[2692]	4090	ELSE
[1496]	4091
[2469]	4092	! Ancienne version
	4093	cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.)
[4412]	4094	radocond(:,:)=radocond(:,:)+rnebcon(:,:)*clwcon(:,:)
[2692]	4095	ENDIF
[1411]	4096
[2469]	4097	ENDIF
[1507]	4098
[2469]	4099	! plulsc(:)=0.
	4100	! do k=1,klev,-1
	4101	! do i=1,klon
	4102	! zzz=prfl(:,k)+psfl(:,k)
	4103	! if (.not.ptconvth.zzz.gt.0.)
	4104	! enddo prfl, psfl,
	4105	! enddo
	4106	!
	4107	! 2. NUAGES STARTIFORMES
	4108	!
	4109	IF (ok_stratus) THEN
	4110	CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq)
	4111	DO k = 1, klev
	4112	DO i = 1, klon
	4113	IF (diafra(i,k).GT.cldfra(i,k)) THEN
[4412]	4114	radocond(i,k) = dialiq(i,k)
[2469]	4115	cldfra(i,k) = diafra(i,k)
	4116	ENDIF
	4117	ENDDO
	4118	ENDDO
	4119	ENDIF
	4120	!
	4121	! Precipitation totale
	4122	!
	4123	DO i = 1, klon
	4124	rain_fall(i) = rain_con(i) + rain_lsc(i)
	4125	snow_fall(i) = snow_con(i) + snow_lsc(i)
	4126	ENDDO
	4127	!
	4128	! Calculer l'humidite relative pour diagnostique
	4129	!
	4130	DO k = 1, klev
	4131	DO i = 1, klon
	4132	zx_t = t_seri(i,k)
	4133	IF (thermcep) THEN
	4134	!! if (iflag_ice_thermo.eq.0) then !jyg
	4135	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	4136	!! else !jyg
	4137	!! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg
	4138	!! endif !jyg
	4139	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	4140	zx_qs = MIN(0.5,zx_qs)
	4141	zcor = 1./(1.-retv*zx_qs)
	4142	zx_qs = zx_qs*zcor
	4143	ELSE
	4144	!! IF (zx_t.LT.t_coup) THEN !jyg
	4145	IF (zx_t.LT.rtt) THEN !jyg
	4146	zx_qs = qsats(zx_t)/pplay(i,k)
	4147	ELSE
	4148	zx_qs = qsatl(zx_t)/pplay(i,k)
	4149	ENDIF
	4150	ENDIF
	4151	zx_rh(i,k) = q_seri(i,k)/zx_qs
[3784]	4152	IF (iflag_ice_thermo .GT. 0) THEN
[3780]	4153	zx_rhl(i,k) = q_seri(i,k)/(qsatl(zx_t)/pplay(i,k))
	4154	zx_rhi(i,k) = q_seri(i,k)/(qsats(zx_t)/pplay(i,k))
[3784]	4155	ENDIF
[2469]	4156	zqsat(i,k)=zx_qs
	4157	ENDDO
	4158	ENDDO
[782]	4159
[2469]	4160	!IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle
	4161	! equivalente a 2m (tpote) pour diagnostique
	4162	!
	4163	DO i = 1, klon
	4164	tpot(i)=zt2m(i)(100000./paprs(i,1))*RKAPPA
	4165	IF (thermcep) THEN
	4166	IF(zt2m(i).LT.RTT) then
	4167	Lheat=RLSTT
	4168	ELSE
	4169	Lheat=RLVTT
	4170	ENDIF
	4171	ELSE
	4172	IF (zt2m(i).LT.RTT) THEN
	4173	Lheat=RLSTT
	4174	ELSE
	4175	Lheat=RLVTT
	4176	ENDIF
	4177	ENDIF
	4178	tpote(i) = tpot(i)* &
	4179	EXP((Lheat qsat2m(i))/(RCPDzt2m(i)))
	4180	ENDDO
[524]	4181
[4389]	4182	IF (ANY(type_trac == ['inca','inco'])) THEN ! ModThL
[524]	4183	#ifdef INCA
[2469]	4184	CALL VTe(VTphysiq)
	4185	CALL VTb(VTinca)
	4186	calday = REAL(days_elapsed + 1) + jH_cur
[524]	4187
[3435]	4188	CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap)
[3563]	4189	CALL AEROSOL_METEO_CALC( &
	4190	calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, &
	4191	prfl,psfl,pctsrf,cell_area, &
	4192	latitude_deg,longitude_deg,u10m,v10m)
[524]	4193
[2469]	4194	zxsnow_dummy(:) = 0.0
[625]	4195
[2469]	4196	CALL chemhook_begin (calday, &
	4197	days_elapsed+1, &
	4198	jH_cur, &
	4199	pctsrf(1,1), &
	4200	latitude_deg, &
	4201	longitude_deg, &
	4202	cell_area, &
	4203	paprs, &
	4204	pplay, &
	4205	coefh(1:klon,1:klev,is_ave), &
	4206	pphi, &
	4207	t_seri, &
	4208	u, &
	4209	v, &
[3613]	4210	rot, &
[2469]	4211	wo(:, :, 1), &
	4212	q_seri, &
	4213	zxtsol, &
[3613]	4214	zt2m, &
[2469]	4215	zxsnow_dummy, &
	4216	solsw, &
	4217	albsol1, &
	4218	rain_fall, &
	4219	snow_fall, &
	4220	itop_con, &
	4221	ibas_con, &
	4222	cldfra, &
	4223	nbp_lon, &
	4224	nbp_lat-1, &
[3872]	4225	tr_seri(:,:,1+nqCO2:nbtr), &
[2469]	4226	ftsol, &
	4227	paprs, &
	4228	cdragh, &
	4229	cdragm, &
	4230	pctsrf, &
	4231	pdtphys, &
	4232	itap)
[616]	4233
[2469]	4234	CALL VTe(VTinca)
	4235	CALL VTb(VTphysiq)
[3865]	4236	#endif
	4237	ENDIF !type_trac = inca or inco
[4389]	4238	IF (type_trac == 'repr') THEN
[3666]	4239	#ifdef REPROBUS
	4240	!CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap)
	4241	CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap)
	4242	#endif
	4243	ENDIF
[2618]	4244
[2469]	4245	!
[2618]	4246	! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol.
	4247	!
	4248	IF (MOD(itaprad,radpas).EQ.0) THEN
[959]	4249
[2618]	4250	!
	4251	!jq - introduce the aerosol direct and first indirect radiative forcings
	4252	!jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr)
[2738]	4253	IF (flag_aerosol .GT. 0) THEN
[2618]	4254	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	4255	IF (.NOT. aerosol_couple) THEN
	4256	!
	4257	CALL readaerosol_optic( &
[3630]	4258	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	4259	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4260	mass_solu_aero, mass_solu_aero_pi, &
	4261	tau_aero, piz_aero, cg_aero, &
	4262	tausum_aero, tau3d_aero)
	4263	ENDIF
[4489]	4264	ELSE IF (iflag_rrtm .EQ.1) THEN ! RRTM radiation
[2618]	4265	IF (aerosol_couple .AND. config_inca == 'aero' ) THEN
	4266	abort_message='config_inca=aero et rrtm=1 impossible'
[2692]	4267	CALL abort_physic(modname,abort_message,1)
[2618]	4268	ELSE
	4269	!
	4270	#ifdef CPP_RRTM
	4271	IF (NSW.EQ.6) THEN
[2738]	4272	!--new aerosol properties SW and LW
[2618]	4273	!
[2753]	4274	#ifdef CPP_Dust
	4275	!--SPL aerosol model
	4276	CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, &
	4277	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	4278	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4279	tausum_aero, tau3d_aero)
	4280	#else
	4281	!--climatologies or INCA aerosols
[3480]	4282	CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, &
[3630]	4283	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
[2618]	4284	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4285	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	4286	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
[2854]	4287	tausum_aero, drytausum_aero, tau3d_aero)
[2753]	4288	#endif
[3274]	4289
	4290	IF (flag_aerosol .EQ. 7) THEN
	4291	CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, &
	4292	tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm)
	4293	ENDIF
	4294
[2738]	4295	!
[2618]	4296	ELSE IF (NSW.EQ.2) THEN
	4297	!--for now we use the old aerosol properties
	4298	!
	4299	CALL readaerosol_optic( &
[3630]	4300	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	4301	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	4302	mass_solu_aero, mass_solu_aero_pi, &
	4303	tau_aero, piz_aero, cg_aero, &
	4304	tausum_aero, tau3d_aero)
	4305	!
	4306	!--natural aerosols
	4307	tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:)
	4308	piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:)
	4309	cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:)
	4310	!--all aerosols
	4311	tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:)
	4312	piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:)
	4313	cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:)
[2738]	4314	!
	4315	!--no LW optics
	4316	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	4317	!
[2618]	4318	ELSE
	4319	abort_message='Only NSW=2 or 6 are possible with ' &
	4320	// 'aerosols and iflag_rrtm=1'
[2692]	4321	CALL abort_physic(modname,abort_message,1)
[2618]	4322	ENDIF
	4323	#else
	4324	abort_message='You should compile with -rrtm if running ' &
	4325	// 'with iflag_rrtm=1'
[2692]	4326	CALL abort_physic(modname,abort_message,1)
[2618]	4327	#endif
	4328	!
	4329	ENDIF
[4489]	4330	ELSE IF (iflag_rrtm .EQ.2) THEN ! ecrad RADIATION
	4331	#ifdef CPP_ECRAD
	4332	!--climatologies or INCA aerosols
	4333	CALL readaerosol_optic_ecrad( debut, aerosol_couple, ok_alw, ok_volcan, &
	4334	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
	4335	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
[5202]	4336	tr_seri, mass_solu_aero, mass_solu_aero_pi, m_allaer)
[4489]	4337	#else
	4338	abort_message='You should compile with -rad ecrad if running with iflag_rrtm=2'
	4339	CALL abort_physic(modname,abort_message,1)
	4340	#endif
[2618]	4341	ENDIF
[4489]	4342
[2738]	4343	ELSE !--flag_aerosol = 0
[2618]	4344	tausum_aero(:,:,:) = 0.
[2854]	4345	drytausum_aero(:,:) = 0.
[2640]	4346	mass_solu_aero(:,:) = 0.
	4347	mass_solu_aero_pi(:,:) = 0.
[2618]	4348	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	4349	tau_aero(:,:,:,:) = 1.e-15
	4350	piz_aero(:,:,:,:) = 1.
	4351	cg_aero(:,:,:,:) = 0.
	4352	ELSE
	4353	tau_aero_sw_rrtm(:,:,:,:) = 1.e-15
	4354	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	4355	piz_aero_sw_rrtm(:,:,:,:) = 1.0
	4356	cg_aero_sw_rrtm(:,:,:,:) = 0.0
	4357	ENDIF
	4358	ENDIF
	4359	!
[2994]	4360	!--WMO criterion to determine tropopause
[3123]	4361	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2994]	4362	!
[2618]	4363	!--STRAT AEROSOL
	4364	!--updates tausum_aero,tau_aero,piz_aero,cg_aero
	4365	IF (flag_aerosol_strat.GT.0) THEN
	4366	IF (prt_level .GE.10) THEN
	4367	PRINT *,'appel a readaerosolstrat', mth_cur
	4368	ENDIF
	4369	IF (iflag_rrtm.EQ.0) THEN
	4370	IF (flag_aerosol_strat.EQ.1) THEN
	4371	CALL readaerosolstrato(debut)
	4372	ELSE
	4373	abort_message='flag_aerosol_strat must equal 1 for rrtm=0'
	4374	CALL abort_physic(modname,abort_message,1)
	4375	ENDIF
	4376	ELSE
[2009]	4377	#ifdef CPP_RRTM
[2690]	4378	#ifndef CPP_StratAer
	4379	!--prescribed strat aerosols
	4380	!--only in the case of non-interactive strat aerosols
[2618]	4381	IF (flag_aerosol_strat.EQ.1) THEN
	4382	CALL readaerosolstrato1_rrtm(debut)
	4383	ELSEIF (flag_aerosol_strat.EQ.2) THEN
[3480]	4384	CALL readaerosolstrato2_rrtm(debut, ok_volcan)
[2618]	4385	ELSE
	4386	abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1'
	4387	CALL abort_physic(modname,abort_message,1)
	4388	ENDIF
[2690]	4389	#endif
[2618]	4390	#else
	4391	abort_message='You should compile with -rrtm if running ' &
	4392	// 'with iflag_rrtm=1'
	4393	CALL abort_physic(modname,abort_message,1)
	4394	#endif
	4395	ENDIF
[3567]	4396	ELSE
	4397	tausum_aero(:,:,id_STRAT_phy) = 0.
[2618]	4398	ENDIF
[2690]	4399	!
	4400	#ifdef CPP_RRTM
	4401	#ifdef CPP_StratAer
[2692]	4402	!--compute stratospheric mask
[3123]	4403	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2690]	4404	!--interactive strat aerosols
	4405	CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut)
	4406	#endif
	4407	#endif
[2618]	4408	!--fin STRAT AEROSOL
	4409	!
	4410
	4411	! Calculer les parametres optiques des nuages et quelques
	4412	! parametres pour diagnostiques:
	4413	!
	4414	IF (aerosol_couple.AND.config_inca=='aero') THEN
	4415	mass_solu_aero(:,:) = ccm(:,:,1)
	4416	mass_solu_aero_pi(:,:) = ccm(:,:,2)
[2692]	4417	ENDIF
[2618]	4418
[4715]	4419	!Rajout appel a interface calcul proprietes optiques des nuages
	4420	CALL call_cloud_optics_prop(klon, klev, ok_newmicro, &
[4412]	4421	paprs, pplay, t_seri, radocond, picefra, cldfra, &
[2618]	4422	cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, &
[4715]	4423	flwp, fiwp, flwc, fiwc, ok_aie, &
[2618]	4424	mass_solu_aero, mass_solu_aero_pi, &
[4692]	4425	cldtaupi, distcltop, temp_cltop, re, fl, ref_liq, ref_ice, &
	4426	ref_liq_pi, ref_ice_pi, scdnc, cldncl, reffclwtop, lcc, reffclws, &
	4427	reffclwc, cldnvi, lcc3d, lcc3dcon, lcc3dstra, icc3dcon, icc3dstra, &
	4428	zfice, dNovrN, ptconv, rnebcon, clwcon)
[4715]	4429
[2469]	4430	!
[2618]	4431	!IM betaCRF
[2469]	4432	!
[2618]	4433	cldtaurad = cldtau
	4434	cldtaupirad = cldtaupi
	4435	cldemirad = cldemi
	4436	cldfrarad = cldfra
	4437
[2469]	4438	!
[2618]	4439	IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. &
	4440	lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN
	4441	!
	4442	! global
	4443	!
[3048]	4444	!IM 251017 begin
[3317]	4445	! print*,'physiq betaCRF global zdtime=',zdtime
[3048]	4446	!IM 251017 end
[2618]	4447	DO k=1, klev
	4448	DO i=1, klon
	4449	IF (pplay(i,k).GE.pfree) THEN
[2469]	4450	beta(i,k) = beta_pbl
[2618]	4451	ELSE
[2469]	4452	beta(i,k) = beta_free
[2618]	4453	ENDIF
	4454	IF (mskocean_beta) THEN
[2469]	4455	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
[2618]	4456	ENDIF
[2469]	4457	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4458	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4459	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4460	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
[2618]	4461	ENDDO
	4462	ENDDO
	4463	!
	4464	ELSE
	4465	!
	4466	! regional
	4467	!
	4468	DO k=1, klev
	4469	DO i=1,klon
	4470	!
	4471	IF (longitude_deg(i).ge.lon1_beta.AND. &
	4472	longitude_deg(i).le.lon2_beta.AND. &
	4473	latitude_deg(i).le.lat1_beta.AND. &
	4474	latitude_deg(i).ge.lat2_beta) THEN
	4475	IF (pplay(i,k).GE.pfree) THEN
	4476	beta(i,k) = beta_pbl
	4477	ELSE
	4478	beta(i,k) = beta_free
	4479	ENDIF
	4480	IF (mskocean_beta) THEN
	4481	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
	4482	ENDIF
	4483	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4484	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4485	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4486	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
	4487	ENDIF
[2469]	4488	!
[2618]	4489	ENDDO
[2469]	4490	ENDDO
	4491	!
[2618]	4492	ENDIF
[766]	4493
[2618]	4494	!lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek
	4495	IF (ok_chlorophyll) THEN
[2469]	4496	print*,"-- reading chlorophyll"
[2618]	4497	CALL readchlorophyll(debut)
	4498	ENDIF
[1863]	4499
[2524]	4500	!--if ok_suntime_rrtm we use ancillay data for RSUN
	4501	!--previous values are therefore overwritten
	4502	!--this is needed for CMIP6 runs
	4503	!--and only possible for new radiation scheme
	4504	IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN
[2525]	4505	#ifdef CPP_RRTM
[2524]	4506	CALL read_rsun_rrtm(debut)
[2525]	4507	#endif
[2524]	4508	ENDIF
	4509
[2692]	4510	IF (mydebug) THEN
	4511	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4512	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4513	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4514	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4515	ENDIF
[2524]	4516
[2469]	4517	!
	4518	!sonia : If Iflag_radia >=2, pertubation of some variables
	4519	!input to radiation (DICE)
	4520	!
	4521	IF (iflag_radia .ge. 2) THEN
	4522	zsav_tsol (:) = zxtsol(:)
[2692]	4523	CALL perturb_radlwsw(zxtsol,iflag_radia)
[2469]	4524	ENDIF
[2328]	4525
[2469]	4526	IF (aerosol_couple.AND.config_inca=='aero') THEN
[959]	4527	#ifdef INCA
[2469]	4528	CALL radlwsw_inca &
[3338]	4529	(chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, &
[2469]	4530	paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, &
[2684]	4531	size(wo,3), wo, &
[2469]	4532	cldfrarad, cldemirad, cldtaurad, &
	4533	heat,heat0,cool,cool0,albpla, &
	4534	topsw,toplw,solsw,sollw, &
	4535	sollwdown, &
	4536	topsw0,toplw0,solsw0,sollw0, &
	4537	lwdn0, lwdn, lwup0, lwup, &
	4538	swdn0, swdn, swup0, swup, &
	4539	ok_ade, ok_aie, &
	4540	tau_aero, piz_aero, cg_aero, &
	4541	topswad_aero, solswad_aero, &
	4542	topswad0_aero, solswad0_aero, &
	4543	topsw_aero, topsw0_aero, &
	4544	solsw_aero, solsw0_aero, &
	4545	cldtaupirad, &
	4546	topswai_aero, solswai_aero)
[955]	4547	#endif
[2469]	4548	ELSE
	4549	!
	4550	!IM calcul radiatif pour le cas actuel
	4551	!
	4552	RCO2 = RCO2_act
	4553	RCH4 = RCH4_act
	4554	RN2O = RN2O_act
	4555	RCFC11 = RCFC11_act
	4556	RCFC12 = RCFC12_act
[3450]	4557	!
	4558	!--interactive CO2 in ppm from carbon cycle
[4298]	4559	IF (carbon_cycle_rad) RCO2=RCO2_glo
[2469]	4560	!
	4561	IF (prt_level .GE.10) THEN
	4562	print *,' ->radlwsw, number 1 '
	4563	ENDIF
	4564	!
[4773]	4565	! AI namelist utilise pour l appel principal de radlwsw (ecrad)
	4566	namelist_ecrad_file='namelist_ecrad'
	4567	!
[2469]	4568	CALL radlwsw &
[4790]	4569	(debut, dist, rmu0, fract, &
[2469]	4570	!albedo SB >>>
	4571	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4572	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4573	!albedo SB <<<
	4574	t_seri,q_seri,wo, &
	4575	cldfrarad, cldemirad, cldtaurad, &
[3989]	4576	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, &
	4577	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2469]	4578	tau_aero, piz_aero, cg_aero, &
	4579	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4580	! Rajoute par OB pour RRTM
	4581	tau_aero_lw_rrtm, &
[5202]	4582	cldtaupirad, m_allaer, &
[3048]	4583	! zqsat, flwcrad, fiwcrad, &
[2469]	4584	zqsat, flwc, fiwc, &
	4585	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
[4773]	4586	namelist_ecrad_file, &
[2469]	4587	heat,heat0,cool,cool0,albpla, &
[3479]	4588	heat_volc,cool_volc, &
[3756]	4589	topsw,toplw,solsw,solswfdiff,sollw, &
[2469]	4590	sollwdown, &
	4591	topsw0,toplw0,solsw0,sollw0, &
[3106]	4592	lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, &
[3082]	4593	swdnc0, swdn0, swdn, swupc0, swup0, swup, &
[2469]	4594	topswad_aero, solswad_aero, &
	4595	topswai_aero, solswai_aero, &
	4596	topswad0_aero, solswad0_aero, &
	4597	topsw_aero, topsw0_aero, &
	4598	solsw_aero, solsw0_aero, &
	4599	topswcf_aero, solswcf_aero, &
	4600	!-C. Kleinschmitt for LW diagnostics
	4601	toplwad_aero, sollwad_aero,&
	4602	toplwai_aero, sollwai_aero, &
	4603	toplwad0_aero, sollwad0_aero,&
	4604	!-end
	4605	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[4773]	4606	ZSWFT0_i, ZFSDN0, ZFSUP0, &
	4607	cloud_cover_sw)
[879]	4608
[3048]	4609	!lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other
	4610	!schemes
	4611	toplw = toplw + betalwoff * (toplw0 - toplw)
	4612	sollw = sollw + betalwoff * (sollw0 - sollw)
	4613	lwdn = lwdn + betalwoff * (lwdn0 - lwdn)
	4614	lwup = lwup + betalwoff * (lwup0 - lwup)
	4615	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	4616	sollwdown(:))
	4617	cool = cool + betalwoff * (cool0 - cool)
	4618
[4619]	4619	IF (.NOT. using_xios) THEN
	4620	!
	4621	!IM 2eme calcul radiatif pour le cas perturbe ou au moins un
	4622	!IM des taux doit etre different du taux actuel
	4623	!IM Par defaut on a les taux perturbes egaux aux taux actuels
	4624	!
	4625	IF (RCO2_per.NE.RCO2_act.OR. &
	4626	RCH4_per.NE.RCH4_act.OR. &
	4627	RN2O_per.NE.RN2O_act.OR. &
	4628	RCFC11_per.NE.RCFC11_act.OR. &
	4629	RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE.
	4630	ENDIF
[2989]	4631	!
[2692]	4632	IF (ok_4xCO2atm) THEN
[2469]	4633	!
	4634	RCO2 = RCO2_per
	4635	RCH4 = RCH4_per
	4636	RN2O = RN2O_per
	4637	RCFC11 = RCFC11_per
	4638	RCFC12 = RCFC12_per
	4639	!
	4640	IF (prt_level .GE.10) THEN
	4641	print *,' ->radlwsw, number 2 '
	4642	ENDIF
	4643	!
[4773]	4644	namelist_ecrad_file='namelist_ecrad'
	4645	!
[2469]	4646	CALL radlwsw &
[4790]	4647	(debut, dist, rmu0, fract, &
[2469]	4648	!albedo SB >>>
	4649	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4650	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4651	!albedo SB <<<
	4652	t_seri,q_seri,wo, &
[2640]	4653	cldfrarad, cldemirad, cldtaurad, &
[3989]	4654	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, &
	4655	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2469]	4656	tau_aero, piz_aero, cg_aero, &
	4657	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4658	! Rajoute par OB pour RRTM
	4659	tau_aero_lw_rrtm, &
[5202]	4660	cldtaupi, m_allaer, &
[3048]	4661	! zqsat, flwcrad, fiwcrad, &
[2469]	4662	zqsat, flwc, fiwc, &
	4663	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
[4773]	4664	namelist_ecrad_file, &
[2469]	4665	heatp,heat0p,coolp,cool0p,albplap, &
[3479]	4666	heat_volc,cool_volc, &
[3756]	4667	topswp,toplwp,solswp,solswfdiffp,sollwp, &
[2469]	4668	sollwdownp, &
	4669	topsw0p,toplw0p,solsw0p,sollw0p, &
[3106]	4670	lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, &
[3082]	4671	swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, &
[2469]	4672	topswad_aerop, solswad_aerop, &
	4673	topswai_aerop, solswai_aerop, &
	4674	topswad0_aerop, solswad0_aerop, &
	4675	topsw_aerop, topsw0_aerop, &
	4676	solsw_aerop, solsw0_aerop, &
	4677	topswcf_aerop, solswcf_aerop, &
	4678	!-C. Kleinschmitt for LW diagnostics
	4679	toplwad_aerop, sollwad_aerop,&
	4680	toplwai_aerop, sollwai_aerop, &
	4681	toplwad0_aerop, sollwad0_aerop,&
	4682	!-end
	4683	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[4773]	4684	ZSWFT0_i, ZFSDN0, ZFSUP0, &
	4685	cloud_cover_sw)
[3987]	4686	ENDIF !ok_4xCO2atm
[4677]	4687
	4688	! A.I aout 2023
	4689	! Effet 3D des nuages Ecrad
	4690	! a passer : nom du ficher namelist et cles ok_3Deffect
	4691	! a declarer comme iflag_rrtm et a lire dans physiq.def
	4692	#ifdef CPP_ECRAD
	4693	IF (ok_3Deffect) then
	4694	! print*,'ok_3Deffect = ',ok_3Deffect
	4695	namelist_ecrad_file='namelist_ecrad_s2'
	4696	CALL radlwsw &
[4790]	4697	(debut, dist, rmu0, fract, &
[4677]	4698	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4699	t_seri,q_seri,wo, &
	4700	cldfrarad, cldemirad, cldtaurad, &
	4701	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, flag_volc_surfstrat, &
	4702	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
	4703	tau_aero, piz_aero, cg_aero, &
	4704	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4705	tau_aero_lw_rrtm, &
[5202]	4706	cldtaupi, m_allaer, &
[4677]	4707	zqsat, flwc, fiwc, &
	4708	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
[4773]	4709	namelist_ecrad_file, &
[4677]	4710	! A modifier
	4711	heat_s2,heat0_s2,cool_s2,cool0_s2,albpla_s2, &
	4712	heat_volc,cool_volc, &
	4713	topsw_s2,toplw_s2,solsw_s2,solswfdiff_s2,sollw_s2, &
	4714	sollwdown_s2, &
	4715	topsw0_s2,toplw0_s2,solsw0_s2,sollw0_s2, &
	4716	lwdnc0_s2, lwdn0_s2, lwdn_s2, lwupc0_s2, lwup0_s2, lwup_s2, &
	4717	swdnc0_s2, swdn0_s2, swdn_s2, swupc0_s2, swup0_s2, swup_s2, &
	4718	topswad_aero_s2, solswad_aero_s2, &
	4719	topswai_aero_s2, solswai_aero_s2, &
	4720	topswad0_aero_s2, solswad0_aero_s2, &
	4721	topsw_aero_s2, topsw0_aero_s2, &
	4722	solsw_aero_s2, solsw0_aero_s2, &
	4723	topswcf_aero_s2, solswcf_aero_s2, &
	4724	!-C. Kleinschmitt for LW diagnostics
	4725	toplwad_aero_s2, sollwad_aero_s2,&
	4726	toplwai_aero_s2, sollwai_aero_s2, &
	4727	toplwad0_aero_s2, sollwad0_aero_s2,&
	4728	!-end
	4729	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[4773]	4730	ZSWFT0_i, ZFSDN0, ZFSUP0, &
	4731	cloud_cover_sw_s2)
[4677]	4732	ENDIF ! ok_3Deffect
	4733	#endif
	4734
[2469]	4735	ENDIF ! aerosol_couple
	4736	itaprad = 0
	4737	!
	4738	! If Iflag_radia >=2, reset pertubed variables
	4739	!
	4740	IF (iflag_radia .ge. 2) THEN
	4741	zxtsol(:) = zsav_tsol (:)
	4742	ENDIF
	4743	ENDIF ! MOD(itaprad,radpas)
	4744	itaprad = itaprad + 1
[879]	4745
[2469]	4746	IF (iflag_radia.eq.0) THEN
	4747	IF (prt_level.ge.9) THEN
	4748	PRINT *,'--------------------------------------------------'
	4749	PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas'
	4750	PRINT *,'>>>> heat et cool mis a zero '
	4751	PRINT *,'--------------------------------------------------'
[2692]	4752	ENDIF
[2469]	4753	heat=0.
	4754	cool=0.
	4755	sollw=0. ! MPL 01032011
	4756	solsw=0.
	4757	radsol=0.
	4758	swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars
	4759	swup0=0.
	4760	lwup=0.
	4761	lwup0=0.
	4762	lwdn=0.
	4763	lwdn0=0.
[2692]	4764	ENDIF
[782]	4765
[2469]	4766	!
	4767	! Calculer radsol a l'exterieur de radlwsw
	4768	! pour prendre en compte le cycle diurne
	4769	! recode par Olivier Boucher en sept 2015
	4770	!
	4771	radsol=solsw*swradcorr+sollw
[2618]	4772
[2692]	4773	IF (ok_4xCO2atm) THEN
[2469]	4774	radsolp=solswp*swradcorr+sollwp
[2692]	4775	ENDIF
[2359]	4776
[2469]	4777	!
	4778	! Ajouter la tendance des rayonnements (tous les pas)
	4779	! avec une correction pour le cycle diurne dans le SW
	4780	!
[2359]	4781
[2469]	4782	DO k=1, klev
[3435]	4783	d_t_swr(:,k)=swradcorr(:)heat(:,k)phys_tstep/RDAY
	4784	d_t_sw0(:,k)=swradcorr(:)heat0(:,k)phys_tstep/RDAY
	4785	d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY
	4786	d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY
[2469]	4787	ENDDO
[2194]	4788
[4523]	4789	CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,dqbs0,paprs,'SW',abortphy,flag_inhib_tend,itap,0)
[3461]	4790	CALL prt_enerbil('SW',itap)
[4523]	4791	CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,dqbs0,paprs,'LW',abortphy,flag_inhib_tend,itap,0)
[3461]	4792	CALL prt_enerbil('LW',itap)
[1863]	4793
[2469]	4794	!
[2692]	4795	IF (mydebug) THEN
	4796	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4797	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4798	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4799	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4800	ENDIF
[1863]	4801
[2469]	4802	! Calculer l'hydrologie de la surface
	4803	!
	4804	! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap,
	4805	! . agesno, ftsol,fqsurf,fsnow, ruis)
	4806	!
[1001]	4807
[2469]	4808	!
	4809	! Calculer le bilan du sol et la derive de temperature (couplage)
	4810	!
	4811	DO i = 1, klon
	4812	! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT
	4813	! a la demande de JLD
	4814	bils(i) = radsol(i) - sens(i) + zxfluxlat(i)
	4815	ENDDO
	4816	!
	4817	!moddeblott(jan95)
	4818	! Appeler le programme de parametrisation de l'orographie
	4819	! a l'echelle sous-maille:
	4820	!
	4821	IF (prt_level .GE.10) THEN
	4822	print *,' call orography ? ', ok_orodr
	4823	ENDIF
	4824	!
	4825	IF (ok_orodr) THEN
	4826	!
	4827	! selection des points pour lesquels le shema est actif:
	4828	igwd=0
	4829	DO i=1,klon
	4830	itest(i)=0
[4458]	4831	zrel_oro(i)=zstd(i)/(max(zsig(i),1.E-8)*sqrt(cell_area(i)))
	4832	!zrel_oro: relative mountain height wrt relief explained by mean slope
	4833	! -> condition on zrel_oro can deactivate the drag on tilted planar terrains
[4352]	4834	! such as ice sheets (work by V. Wiener)
[4458]	4835	! zpmm_orodr_t and zstd_orodr_t are activation thresholds set by F. Lott to
	4836	! earn computation time but they are not physical.
[4466]	4837	IF (((zpic(i)-zmea(i)).GT.zpmm_orodr_t).AND.(zstd(i).GT.zstd_orodr_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2469]	4838	itest(i)=1
	4839	igwd=igwd+1
	4840	idx(igwd)=i
	4841	ENDIF
	4842	ENDDO
	4843	! igwdim=MAX(1,igwd)
	4844	!
	4845	IF (ok_strato) THEN
[1863]	4846
[3435]	4847	CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, &
[2469]	4848	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4849	igwd,idx,itest, &
	4850	t_seri, u_seri, v_seri, &
	4851	zulow, zvlow, zustrdr, zvstrdr, &
	4852	d_t_oro, d_u_oro, d_v_oro)
[1863]	4853
[2469]	4854	ELSE
[3435]	4855	CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4856	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4857	igwd,idx,itest, &
	4858	t_seri, u_seri, v_seri, &
	4859	zulow, zvlow, zustrdr, zvstrdr, &
	4860	d_t_oro, d_u_oro, d_v_oro)
	4861	ENDIF
	4862	!
	4863	! ajout des tendances
	4864	!-----------------------------------------------------------------------
	4865	! ajout des tendances de la trainee de l'orographie
[4523]	4866	CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,dqbs0,paprs,'oro', &
[2812]	4867	abortphy,flag_inhib_tend,itap,0)
[3461]	4868	CALL prt_enerbil('oro',itap)
[2469]	4869	!----------------------------------------------------------------------
	4870	!
	4871	ENDIF ! fin de test sur ok_orodr
	4872	!
[2692]	4873	IF (mydebug) THEN
	4874	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4875	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4876	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4877	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4878	ENDIF
[1001]	4879
[2469]	4880	IF (ok_orolf) THEN
	4881	!
	4882	! selection des points pour lesquels le shema est actif:
	4883	igwd=0
	4884	DO i=1,klon
	4885	itest(i)=0
[4458]	4886	!zrel_oro: relative mountain height wrt relief explained by mean slope
	4887	! -> condition on zrel_oro can deactivate the lifting on tilted planar terrains
[4352]	4888	! such as ice sheets (work by V. Wiener)
[4458]	4889	zrel_oro(i)=zstd(i)/(max(zsig(i),1.E-8)*sqrt(cell_area(i)))
[4466]	4890	IF (((zpic(i)-zmea(i)).GT.zpmm_orolf_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2469]	4891	itest(i)=1
	4892	igwd=igwd+1
	4893	idx(igwd)=i
	4894	ENDIF
	4895	ENDDO
	4896	! igwdim=MAX(1,igwd)
	4897	!
	4898	IF (ok_strato) THEN
[1001]	4899
[3435]	4900	CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4901	latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, &
	4902	igwd,idx,itest, &
	4903	t_seri, u_seri, v_seri, &
	4904	zulow, zvlow, zustrli, zvstrli, &
	4905	d_t_lif, d_u_lif, d_v_lif )
[2333]	4906
[2469]	4907	ELSE
[3435]	4908	CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4909	latitude_deg,zmea,zstd,zpic, &
	4910	itest, &
	4911	t_seri, u_seri, v_seri, &
	4912	zulow, zvlow, zustrli, zvstrli, &
	4913	d_t_lif, d_u_lif, d_v_lif)
	4914	ENDIF
[1638]	4915
[2469]	4916	! ajout des tendances de la portance de l'orographie
[4523]	4917	CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, dqbs0,paprs, &
[2812]	4918	'lif', abortphy,flag_inhib_tend,itap,0)
[3461]	4919	CALL prt_enerbil('lif',itap)
[2469]	4920	ENDIF ! fin de test sur ok_orolf
[1638]	4921
[2469]	4922	IF (ok_hines) then
	4923	! HINES GWD PARAMETRIZATION
	4924	east_gwstress=0.
	4925	west_gwstress=0.
	4926	du_gwd_hines=0.
	4927	dv_gwd_hines=0.
[3435]	4928	CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, &
[2469]	4929	u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, &
	4930	du_gwd_hines, dv_gwd_hines)
	4931	zustr_gwd_hines=0.
	4932	zvstr_gwd_hines=0.
	4933	DO k = 1, klev
[3435]	4934	zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep &
[2469]	4935	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4936	zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep &
[2469]	4937	* (paprs(:, k)-paprs(:, k+1))/rg
	4938	ENDDO
[1001]	4939
[2469]	4940	d_t_hin(:, :)=0.
	4941	CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, &
[4523]	4942	dqi0, dqbs0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0)
[3461]	4943	CALL prt_enerbil('hin',itap)
[2469]	4944	ENDIF
[2333]	4945
[2469]	4946	IF (.not. ok_hines .and. ok_gwd_rando) then
[3435]	4947	! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod
	4948	CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, &
[2469]	4949	v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, &
	4950	dv_gwd_front, east_gwstress, west_gwstress)
	4951	zustr_gwd_front=0.
	4952	zvstr_gwd_front=0.
	4953	DO k = 1, klev
[3435]	4954	zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep &
[2469]	4955	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4956	zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep &
[2469]	4957	* (paprs(:, k)-paprs(:, k+1))/rg
	4958	ENDDO
[644]	4959
[4523]	4960	CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, dqbs0, &
[2812]	4961	paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4962	CALL prt_enerbil('front_gwd_rando',itap)
[2469]	4963	ENDIF
[1938]	4964
[2692]	4965	IF (ok_gwd_rando) THEN
[3435]	4966	CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, &
[2469]	4967	rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, &
	4968	du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress)
[4523]	4969	CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, dqbs0, &
[2812]	4970	paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4971	CALL prt_enerbil('flott_gwd_rando',itap)
[2469]	4972	zustr_gwd_rando=0.
	4973	zvstr_gwd_rando=0.
	4974	DO k = 1, klev
[3435]	4975	zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep &
[2469]	4976	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4977	zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep &
[2469]	4978	* (paprs(:, k)-paprs(:, k+1))/rg
	4979	ENDDO
[2692]	4980	ENDIF
[766]	4981
[2469]	4982	! STRESS NECESSAIRES: TOUTE LA PHYSIQUE
[1279]	4983
[2692]	4984	IF (mydebug) THEN
	4985	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4986	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4987	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4988	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4989	ENDIF
[2136]	4990
[2469]	4991	DO i = 1, klon
	4992	zustrph(i)=0.
	4993	zvstrph(i)=0.
	4994	ENDDO
	4995	DO k = 1, klev
	4996	DO i = 1, klon
[3435]	4997	zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* &
[2469]	4998	(paprs(i,k)-paprs(i,k+1))/rg
[3435]	4999	zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* &
[2469]	5000	(paprs(i,k)-paprs(i,k+1))/rg
	5001	ENDDO
	5002	ENDDO
	5003	!
	5004	!IM calcul composantes axiales du moment angulaire et couple des montagnes
	5005	!
	5006	IF (is_sequential .and. ok_orodr) THEN
	5007	CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, &
	5008	ra,rg,romega, &
	5009	latitude_deg,longitude_deg,pphis, &
	5010	zustrdr,zustrli,zustrph, &
	5011	zvstrdr,zvstrli,zvstrph, &
	5012	paprs,u,v, &
	5013	aam, torsfc)
	5014	ENDIF
	5015	!IM cf. FLott END
	5016	!DC Calcul de la tendance due au methane
[3461]	5017	IF (ok_qch4) THEN
[4755]	5018	! d_q_ch4: H2O source from CH4 in MMR/s (mass mixing ratio/s or kg H2O/kg air/s)
[4626]	5019	#ifdef CPP_StratAer
[4625]	5020	CALL stratH2O_methox(debut,paprs,d_q_ch4)
[4626]	5021	#else
[4755]	5022	! ECMWF routine METHOX
[4626]	5023	CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay)
[4629]	5024	#endif
[4755]	5025	! add humidity tendency due to methane
[3435]	5026	d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep
[4523]	5027	CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, dqbs0, paprs, &
[2812]	5028	'q_ch4', abortphy,flag_inhib_tend,itap,0)
[4755]	5029	d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep ! update with H2O conserv done in add_phys_tend
[2692]	5030	ENDIF
[2469]	5031	!
	5032	!
[4601]	5033	#ifdef CPP_StratAer
	5034	IF (ok_qemiss) THEN
	5035	flh2o=1
	5036	IF(flag_verbose_strataer) THEN
	5037	print *,'IN physiq_mod: ok_qemiss =yes (',ok_qemiss,'), flh2o=',flh2o
	5038	print *,'IN physiq_mod: flag_emit=',flag_emit,', nErupt=',nErupt
	5039	print *,'IN physiq_mod: nAerErupt=',nAerErupt
	5040	ENDIF
	5041
	5042	SELECT CASE(flag_emit)
[4755]	5043	CASE(1) ! emission volc H2O in LMDZ
[4601]	5044	DO ieru=1, nErupt
	5045	IF (year_cur==year_emit_vol(ieru).AND.&
	5046	mth_cur==mth_emit_vol(ieru).AND.&
	5047	day_cur>=day_emit_vol(ieru).AND.&
	5048	day_cur<(day_emit_vol(ieru)+injdur)) THEN
	5049
	5050	IF(flag_verbose_strataer) print *,'IN physiq_mod: date=',year_cur,mth_cur,day_cur
[4755]	5051	! initialisation of q tendency emission
[4601]	5052	d_q_emiss(:,:)=0.
	5053	! daily injection mass emission - NL
	5054	m_H2O_emiss_vol_daily = m_H2O_emiss_vol(ieru)/(REAL(injdur)&
	5055	*REAL(ponde_lonlat_vol(ieru)))
	5056	!
	5057	CALL STRATEMIT(pdtphys,pdtphys,latitude_deg,longitude_deg,t_seri,&
	5058	pplay,paprs,tr_seri,&
	5059	m_H2O_emiss_vol_daily,&
	5060	xlat_min_vol(ieru),xlat_max_vol(ieru),&
	5061	xlon_min_vol(ieru),xlon_max_vol(ieru),&
	5062	altemiss_vol(ieru),sigma_alt_vol(ieru),1,1.,&
	5063	nAerErupt+1,0)
	5064
	5065	IF(flag_verbose_strataer) print *,'IN physiq_mod: min max d_q_emiss=',&
	5066	minval(d_q_emiss),maxval(d_q_emiss)
	5067
	5068	CALL add_phys_tend(du0, dv0, dt0, d_q_emiss, dql0, dqi0, dqbs0, paprs, &
	5069	'q_emiss',abortphy,flag_inhib_tend,itap,0)
	5070	IF (abortphy==1) Print*,'ERROR ABORT TEND EMISS'
	5071	ENDIF
	5072	ENDDO
	5073	flh2o=0
	5074	END SELECT ! emission scenario (flag_emit)
	5075	ENDIF
	5076	#endif
[2897]	5077
	5078	!===============================================================
	5079	! Additional tendency of TKE due to orography
	5080	!===============================================================
	5081	!
	5082	! Inititialization
	5083	!------------------
	5084
	5085	addtkeoro=0
	5086	CALL getin_p('addtkeoro',addtkeoro)
	5087
	5088	IF (prt_level.ge.5) &
	5089	print*,'addtkeoro', addtkeoro
	5090
	5091	alphatkeoro=1.
	5092	CALL getin_p('alphatkeoro',alphatkeoro)
	5093	alphatkeoro=min(max(0.,alphatkeoro),1.)
	5094
[3461]	5095	smallscales_tkeoro=.FALSE.
[2897]	5096	CALL getin_p('smallscales_tkeoro',smallscales_tkeoro)
	5097
	5098
[3461]	5099	dtadd(:,:)=0.
	5100	duadd(:,:)=0.
	5101	dvadd(:,:)=0.
[2897]	5102
	5103	! Choices for addtkeoro:
	5104	! ** 0 no TKE tendency from orography
	5105	! ** 1 we include a fraction alphatkeoro of the whole tendency duoro
	5106	! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro
	5107	!
	5108
	5109	IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN
	5110	! -------------------------------------------
	5111
	5112
	5113	! selection des points pour lesquels le schema est actif:
	5114
	5115
	5116	IF (addtkeoro .EQ. 1 ) THEN
	5117
	5118	duadd(:,:)=alphatkeoro*d_u_oro(:,:)
	5119	dvadd(:,:)=alphatkeoro*d_v_oro(:,:)
	5120
	5121	ELSE IF (addtkeoro .EQ. 2) THEN
	5122
[3461]	5123	IF (smallscales_tkeoro) THEN
[2897]	5124	igwd=0
	5125	DO i=1,klon
	5126	itest(i)=0
	5127	! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato
	5128	! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE
	5129	! Mais attention, cela ne va pas dans le sens de la conservation de l'energie!
[4466]	5130	IF ((zstd(i).GT.1.0) .AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2897]	5131	itest(i)=1
	5132	igwd=igwd+1
	5133	idx(igwd)=i
	5134	ENDIF
	5135	ENDDO
	5136
	5137	ELSE
	5138
	5139	igwd=0
	5140	DO i=1,klon
	5141	itest(i)=0
[4466]	5142	IF (((zpic(i)-zmea(i)).GT.zpmm_orodr_t).AND.(zstd(i).GT.zstd_orodr_t).AND.(zrel_oro(i).LE.zrel_oro_t)) THEN
[2897]	5143	itest(i)=1
	5144	igwd=igwd+1
	5145	idx(igwd)=i
[3461]	5146	ENDIF
[2897]	5147	ENDDO
	5148
[3461]	5149	ENDIF
[2897]	5150
[3461]	5151	CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, &
[2897]	5152	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	5153	igwd,idx,itest, &
	5154	t_seri, u_seri, v_seri, &
	5155	zulow, zvlow, zustrdr, zvstrdr, &
	5156	d_t_oro_gw, d_u_oro_gw, d_v_oro_gw)
	5157
[3461]	5158	zustrdr(:)=0.
	5159	zvstrdr(:)=0.
	5160	zulow(:)=0.
	5161	zvlow(:)=0.
[2897]	5162
[3461]	5163	duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:)
	5164	dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:)
	5165	ENDIF
[2897]	5166
	5167
	5168	! TKE update from subgrid temperature and wind tendencies
	5169	!----------------------------------------------------------
	5170	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
	5171
	5172
[3198]	5173	CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke)
[3888]	5174	!
	5175	! Prevent pbl_tke_w from becoming negative
	5176	wake_delta_pbl_tke(:,:,:) = max(wake_delta_pbl_tke(:,:,:), -pbl_tke(:,:,:))
	5177	!
[2897]	5178
	5179	ENDIF
	5180	! -----
	5181	!===============================================================
	5182
	5183
[2469]	5184	!====================================================================
	5185	! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..)
	5186	!====================================================================
	5187	! Abderrahmane 24.08.09
	5188
	5189	IF (ok_cosp) THEN
	5190	! adeclarer
[1279]	5191	#ifdef CPP_COSP
[3435]	5192	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[1279]	5193
[2469]	5194	IF (prt_level .GE.10) THEN
	5195	print*,'freq_cosp',freq_cosp
	5196	ENDIF
	5197	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	5198	! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=',
	5199	! s ref_liq,ref_ice
[3435]	5200	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[2469]	5201	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
[2794]	5202	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
[2469]	5203	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	5204	JrNt,ref_liq,ref_ice, &
	5205	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	5206	zu10m,zv10m,pphis, &
	5207	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	5208	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	5209	prfl(:,1:klev),psfl(:,1:klev), &
	5210	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	5211	mr_ozone,cldtau, cldemi)
[1412]	5212
[2469]	5213	! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol,
	5214	! L cfaddbze,clcalipso2,dbze,cltlidarradar,
	5215	! M clMISR,
	5216	! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp,
	5217	! I tauisccp,albisccp,meantbisccp,meantbclrisccp)
[1279]	5218
[2469]	5219	ENDIF
[3370]	5220	#endif
[1279]	5221
[3370]	5222	#ifdef CPP_COSP2
[3435]	5223	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3370]	5224
	5225	IF (prt_level .GE.10) THEN
	5226	print*,'freq_cosp',freq_cosp
	5227	ENDIF
	5228	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	5229	print*,'Dans physiq.F avant appel '
	5230	! s ref_liq,ref_ice
[3435]	5231	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
[3370]	5232	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	5233	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	5234	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	5235	JrNt,ref_liq,ref_ice, &
	5236	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	5237	zu10m,zv10m,pphis, &
	5238	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	5239	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	5240	prfl(:,1:klev),psfl(:,1:klev), &
	5241	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	5242	mr_ozone,cldtau, cldemi)
	5243	ENDIF
[1279]	5244	#endif
[3370]	5245
[3491]	5246	#ifdef CPP_COSPV2
	5247	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3726]	5248	! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3491]	5249
	5250	IF (prt_level .GE.10) THEN
	5251	print*,'freq_cosp',freq_cosp
	5252	ENDIF
[3726]	5253	DO k = 1, klev
	5254	DO i = 1, klon
	5255	phicosp(i,k) = pphi(i,k) + pphis(i)
	5256	ENDDO
	5257	ENDDO
[3491]	5258	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	5259	print*,'Dans physiq.F avant appel '
	5260	! s ref_liq,ref_ice
	5261	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	5262	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	5263	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	5264	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	5265	JrNt,ref_liq,ref_ice, &
	5266	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	5267	zu10m,zv10m,pphis, &
	5268	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	5269	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	5270	prfl(:,1:klev),psfl(:,1:klev), &
	5271	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	5272	mr_ozone,cldtau, cldemi)
	5273	ENDIF
	5274	#endif
	5275
[2469]	5276	ENDIF !ok_cosp
[2580]	5277
	5278
	5279	! Marine
	5280
	5281	IF (ok_airs) then
	5282
[3435]	5283	IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN
[2692]	5284	write(,) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs
	5285	CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,&
	5286	& map_prop_hc,map_prop_hist,&
	5287	& map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,&
	5288	& map_emis_Cb,map_pcld_Cb,map_tcld_Cb,&
	5289	& map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,&
	5290	& map_emis_Anv,map_pcld_Anv,map_tcld_Anv,&
	5291	& map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,&
	5292	& map_ntot,map_hc,map_hist,&
	5293	& map_Cb,map_ThCi,map_Anv,&
	5294	& alt_tropo )
[2580]	5295	ENDIF
	5296
	5297	ENDIF ! ok_airs
	5298
	5299
[2469]	5300	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	5301	!AA
	5302	!AA Installation de l'interface online-offline pour traceurs
	5303	!AA
	5304	!====================================================================
	5305	! Calcul des tendances traceurs
	5306	!====================================================================
	5307	!
[959]	5308
[4389]	5309	IF (type_trac == 'repr') THEN
[3666]	5310	!MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod
	5311	!MM dans Reprobus
[2469]	5312	sh_in(:,:) = q_seri(:,:)
[3666]	5313	#ifdef REPROBUS
	5314	d_q_rep(:,:) = 0.
	5315	d_ql_rep(:,:) = 0.
	5316	d_qi_rep(:,:) = 0.
	5317	#endif
[2469]	5318	ELSE
	5319	sh_in(:,:) = qx(:,:,ivap)
[4098]	5320	IF (nqo >= 3) THEN
[3861]	5321	ch_in(:,:) = qx(:,:,iliq) + qx(:,:,isol)
	5322	ELSE
	5323	ch_in(:,:) = qx(:,:,iliq)
	5324	ENDIF
[2692]	5325	ENDIF
[1565]	5326
[2630]	5327	#ifdef CPP_Dust
[3776]	5328	! Avec SPLA, iflag_phytrac est forcé =1
	5329	CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I
[2630]	5330	pdtphys,ftsol, & ! I
	5331	t,q_seri,paprs,pplay,RHcl, & ! I
	5332	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I
	5333	coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I
	5334	u_seri, v_seri, latitude_deg, longitude_deg, &
	5335	pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I
	5336	da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I
	5337	epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I
	5338	ev,wdtrainA, wdtrainM,wght_cvfd, & ! I
	5339	fm_therm, entr_therm, rneb, & ! I
	5340	beta_prec_fisrt,beta_prec, & !I
	5341	zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I
	5342	d_tr_dyn,tr_seri)
	5343
	5344	#else
[3776]	5345	IF (iflag_phytrac == 1 ) THEN
	5346	CALL phytrac ( &
[2469]	5347	itap, days_elapsed+1, jH_cur, debut, &
[3435]	5348	lafin, phys_tstep, u, v, t, &
[2469]	5349	paprs, pplay, pmfu, pmfd, &
	5350	pen_u, pde_u, pen_d, pde_d, &
	5351	cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, &
	5352	u1, v1, ftsol, pctsrf, &
	5353	zustar, zu10m, zv10m, &
	5354	wstar(:,is_ave), ale_bl, ale_wake, &
	5355	latitude_deg, longitude_deg, &
	5356	frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, &
	5357	presnivs, pphis, pphi, albsol1, &
[2784]	5358	sh_in, ch_in, rhcl, cldfra, rneb, &
[4412]	5359	diafra, radocond, itop_con, ibas_con, &
[2469]	5360	pmflxr, pmflxs, prfl, psfl, &
	5361	da, phi, mp, upwd, &
	5362	phi2, d1a, dam, sij, wght_cvfd, & !<<RomP+RL
	5363	wdtrainA, wdtrainM, sigd, clw,elij, & !<<RomP
	5364	ev, ep, epmlmMm, eplaMm, & !<<RomP
	5365	dnwd, aerosol_couple, flxmass_w, &
	5366	tau_aero, piz_aero, cg_aero, ccm, &
	5367	rfname, &
	5368	d_tr_dyn, & !<<RomP
[3418]	5369	tr_seri, init_source)
[3666]	5370	#ifdef REPROBUS
	5371
	5372
	5373	print*,'avt add phys rep',abortphy
	5374
	5375	CALL add_phys_tend &
[4523]	5376	(du0,dv0,dt0,d_q_rep,d_ql_rep,d_qi_rep,dqbs0,paprs,&
[3666]	5377	'rep',abortphy,flag_inhib_tend,itap,0)
	5378	IF (abortphy==1) Print*,'ERROR ABORT REP'
	5379
	5380	print*,'apr add phys rep',abortphy
	5381
[2630]	5382	#endif
[3776]	5383	ENDIF ! (iflag_phytrac=1)
[3666]	5384
	5385	#endif
[3776]	5386	!ENDIF ! (iflag_phytrac=1)
[524]	5387
[2469]	5388	IF (offline) THEN
[524]	5389
[2469]	5390	IF (prt_level.ge.9) &
	5391	print*,'Attention on met a 0 les thermiques pour phystoke'
[2692]	5392	CALL phystokenc ( &
[2469]	5393	nlon,klev,pdtphys,longitude_deg,latitude_deg, &
	5394	t,pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	5395	fm_therm,entr_therm, &
	5396	cdragh,coefh(1:klon,1:klev,is_ave),u1,v1,ftsol,pctsrf, &
	5397	frac_impa, frac_nucl, &
[3435]	5398	pphis,cell_area,phys_tstep,itap, &
[2469]	5399	qx(:,:,ivap),da,phi,mp,upwd,dnwd)
[524]	5400
	5401
[2469]	5402	ENDIF
[4613]	5403
[2469]	5404	!
	5405	! Calculer le transport de l'eau et de l'energie (diagnostique)
	5406	!
[4229]	5407	CALL transp (paprs,zxtsol, t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zphi, &
	5408	ue, ve, uq, vq, uwat, vwat)
[2469]	5409	!
	5410	!IM global posePB BEG
	5411	IF(1.EQ.0) THEN
	5412	!
[4229]	5413	CALL transp_lay (paprs,zxtsol, t_seri, q_seri, u_seri, v_seri, zphi, &
[2469]	5414	ve_lay, vq_lay, ue_lay, uq_lay)
	5415	!
	5416	ENDIF !(1.EQ.0) THEN
	5417	!IM global posePB END
[4229]	5418	!
[2469]	5419	! Accumuler les variables a stocker dans les fichiers histoire:
	5420	!
[1279]	5421
[2469]	5422	!================================================================
	5423	! Conversion of kinetic and potential energy into heat, for
	5424	! parameterisation of subgrid-scale motions
	5425	!================================================================
[1753]	5426
[2469]	5427	d_t_ec(:,:)=0.
	5428	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
[4232]	5429	CALL ener_conserv(klon,klev,pdtphys,u,v,t,qx,ivap,iliq,isol, &
[2851]	5430	u_seri,v_seri,t_seri,q_seri,ql_seri,qs_seri,pbl_tke(:,:,is_ave)-tke0(:,:), &
[2469]	5431	zmasse,exner,d_t_ec)
	5432	t_seri(:,:)=t_seri(:,:)+d_t_ec(:,:)
[1753]	5433
[4887]	5434	!==================================================================
	5435	!--OB water mass fixer for the physics
	5436	!--water profiles are corrected to force mass conservation of water
	5437	!--currently flag is turned off
	5438	!==================================================================
[5202]	5439	IF (ok_water_mass_fixer) THEN
[4887]	5440	qql2(:)=0.0
	5441	DO k = 1, klev
	5442	qql2(:)=qql2(:)+(q_seri(:,k)+ql_seri(:,k))*zmasse(:,k)
	5443	IF (nqo >= 3) THEN
	5444	qql2(:)=qql2(:)+qs_seri(:,k)*zmasse(:,k)
	5445	ENDIF
	5446	IF (ok_bs) THEN
	5447	qql2(:)=qql2(:)+qbs_seri(:,k)*zmasse(:,k)
	5448	ENDIF
	5449	ENDDO
	5450
	5451	#ifdef CPP_StratAer
	5452	IF (ok_qemiss) THEN
	5453	DO k = 1, klev
	5454	qql1(:) = qql1(:)+d_q_emiss(:,k)*zmasse(:,k)
	5455	ENDDO
	5456	ENDIF
	5457	#endif
	5458	IF (ok_qch4) THEN
	5459	DO k = 1, klev
	5460	qql1(:) = qql1(:)+d_q_ch4_dtime(:,k)*zmasse(:,k)
	5461	ENDDO
	5462	ENDIF
	5463
	5464	DO i = 1, klon
	5465	!--compute ratio of what q+ql should be with conservation to what it is
	5466	IF (ok_bs) THEN
	5467	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i)-bs_fall(i))*pdtphys)/qql2(i)
	5468	ELSE
	5469	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i))*pdtphys)/qql2(i)
	5470	ENDIF
	5471	DO k = 1, klev
	5472	q_seri(i,k) =q_seri(i,k)*corrqql
	5473	ql_seri(i,k)=ql_seri(i,k)*corrqql
	5474	IF (nqo >= 3) THEN
	5475	qs_seri(i,k)=qs_seri(i,k)*corrqql
	5476	ENDIF
	5477	IF (ok_bs) THEN
	5478	qbs_seri(i,k)=qbs_seri(i,k)*corrqql
	5479	ENDIF
	5480	ENDDO
	5481	ENDDO
	5482	ENDIF
	5483	!--fin mass fixer
	5484
	5485	!cc prw = eau precipitable
	5486	! prlw = colonne eau liquide
	5487	! prlw = colonne eau solide
	5488	! prbsw = colonne neige soufflee
	5489	! water_budget = non-conservation residual from the LMDZ physics
	5490	! (should be equal to machine precision if mass fixer is activated)
	5491	prw(:) = 0.
	5492	prlw(:) = 0.
	5493	prsw(:) = 0.
	5494	prbsw(:) = 0.
	5495	water_budget(:) = 0.0
	5496	DO k = 1, klev
	5497	prw(:) = prw(:) + q_seri(:,k)*zmasse(:,k)
	5498	prlw(:) = prlw(:) + ql_seri(:,k)*zmasse(:,k)
	5499	water_budget(:) = water_budget(:) + (q_seri(:,k)-qx(:,k,ivap)+ql_seri(:,k)-qx(:,k,iliq))*zmasse(:,k)
	5500	IF (nqo >= 3) THEN
	5501	prsw(:) = prsw(:) + qs_seri(:,k)*zmasse(:,k)
	5502	water_budget(:) = water_budget(:) + (qs_seri(:,k)-qx(:,k,isol))*zmasse(:,k)
	5503	ENDIF
	5504	IF (nqo >= 4 .AND. ok_bs) THEN
	5505	prbsw(:)= prbsw(:) + qbs_seri(:,k)*zmasse(:,k)
	5506	water_budget(:) = water_budget(:) + (qbs_seri(:,k)-qx(:,k,ibs))*zmasse(:,k)
	5507	ENDIF
	5508	ENDDO
	5509	water_budget(:)=water_budget(:)+(rain_fall(:)+snow_fall(:)-evap(:))*pdtphys
	5510	IF (ok_bs) THEN
	5511	water_budget(:)=water_budget(:)+bs_fall(:)*pdtphys
	5512	ENDIF
	5513
[2469]	5514	!=======================================================================
	5515	! SORTIES
	5516	!=======================================================================
	5517	!
	5518	!IM initialisation + calculs divers diag AMIP2
	5519	!
	5520	include "calcul_divers.h"
	5521	!
	5522	!IM Interpolation sur les niveaux de pression du NMC
	5523	! -------------------------------------------------
	5524	!
	5525	include "calcul_STDlev.h"
	5526	!
	5527	! slp sea level pressure derived from Arpege-IFS : CALL ctstar + CALL pppmer
	5528	CALL diag_slp(klon,t_seri,paprs,pplay,pphis,ptstar,pt0,slp)
	5529	!
	5530	!
[4389]	5531	IF (ANY(type_trac == ['inca','inco'])) THEN
[655]	5532	#ifdef INCA
[2469]	5533	CALL VTe(VTphysiq)
	5534	CALL VTb(VTinca)
[959]	5535
[2469]	5536	CALL chemhook_end ( &
[3435]	5537	phys_tstep, &
[2469]	5538	pplay, &
	5539	t_seri, &
[3872]	5540	tr_seri(:,:,1+nqCO2:nbtr), &
[2469]	5541	nbtr, &
	5542	paprs, &
	5543	q_seri, &
	5544	cell_area, &
	5545	pphi, &
	5546	pphis, &
[2832]	5547	zx_rh, &
[4127]	5548	aps, bps, ap, bp, lafin)
[959]	5549
[2469]	5550	CALL VTe(VTinca)
	5551	CALL VTb(VTphysiq)
[655]	5552	#endif
[2692]	5553	ENDIF
[655]	5554
[4389]	5555	IF (type_trac == 'repr') THEN
[4140]	5556	#ifdef REPROBUS
	5557	CALL coord_hyb_rep(paprs, pplay, aps, bps, ap, bp, cell_area)
	5558	#endif
	5559	ENDIF
[1753]	5560
[2469]	5561	!
	5562	! Convertir les incrementations en tendances
	5563	!
	5564	IF (prt_level .GE.10) THEN
	5565	print *,'Convertir les incrementations en tendances '
	5566	ENDIF
	5567	!
[2692]	5568	IF (mydebug) THEN
	5569	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	5570	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	5571	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	5572	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	5573	ENDIF
[766]	5574
[2469]	5575	DO k = 1, klev
	5576	DO i = 1, klon
[3435]	5577	d_u(i,k) = ( u_seri(i,k) - u(i,k) ) / phys_tstep
	5578	d_v(i,k) = ( v_seri(i,k) - v(i,k) ) / phys_tstep
	5579	d_t(i,k) = ( t_seri(i,k)-t(i,k) ) / phys_tstep
	5580	d_qx(i,k,ivap) = ( q_seri(i,k) - qx(i,k,ivap) ) / phys_tstep
	5581	d_qx(i,k,iliq) = ( ql_seri(i,k) - qx(i,k,iliq) ) / phys_tstep
[2469]	5582	!CR: on ajoute le contenu en glace
[4098]	5583	IF (nqo >= 3) THEN
[3435]	5584	d_qx(i,k,isol) = ( qs_seri(i,k) - qx(i,k,isol) ) / phys_tstep
[2692]	5585	ENDIF
[4951]	5586	!--ice_supersat: nqo=5, we add cloud fraction and cloudy water vapor to total water vapor ratio
	5587	IF (nqo.ge.5 .and. ok_ice_supersat) THEN
	5588	d_qx(i,k,icf) = ( cf_seri(i,k) - qx(i,k,icf) ) / phys_tstep
	5589	d_qx(i,k,irvc) = ( rvc_seri(i,k) - qx(i,k,irvc) ) / phys_tstep
[4059]	5590	ENDIF
[4523]	5591
	5592	IF (nqo.ge.4 .and. ok_bs) THEN
	5593	d_qx(i,k,ibs) = ( qbs_seri(i,k) - qx(i,k,ibs) ) / phys_tstep
	5594	ENDIF
	5595
[2469]	5596	ENDDO
	5597	ENDDO
	5598	!
[4367]	5599	! DC: All iterations are cycled if nqtot==nqo, so no nqtot>nqo condition required
	5600	itr = 0
	5601	DO iq = 1, nqtot
	5602	IF(.NOT.tracers(iq)%isInPhysics) CYCLE
	5603	itr = itr+1
	5604	DO k = 1, klev
	5605	DO i = 1, klon
	5606	d_qx(i,k,iq) = ( tr_seri(i,k,itr) - qx(i,k,iq) ) / phys_tstep
[2469]	5607	ENDDO
	5608	ENDDO
[4367]	5609	ENDDO
[2469]	5610	!
	5611	!IM rajout diagnostiques bilan KP pour analyse MJO par Jun-Ichi Yano
	5612	!IM global posePB include "write_bilKP_ins.h"
	5613	!IM global posePB include "write_bilKP_ave.h"
	5614	!
	5615	! Sauvegarder les valeurs de t et q a la fin de la physique:
	5616	!
[2499]	5617	u_ancien(:,:) = u_seri(:,:)
	5618	v_ancien(:,:) = v_seri(:,:)
	5619	t_ancien(:,:) = t_seri(:,:)
	5620	q_ancien(:,:) = q_seri(:,:)
	5621	ql_ancien(:,:) = ql_seri(:,:)
	5622	qs_ancien(:,:) = qs_seri(:,:)
[4951]	5623	qbs_ancien(:,:)= qbs_seri(:,:)
	5624	cf_ancien(:,:) = cf_seri(:,:)
	5625	rvc_ancien(:,:)= rvc_seri(:,:)
[2499]	5626	CALL water_int(klon,klev,q_ancien,zmasse,prw_ancien)
	5627	CALL water_int(klon,klev,ql_ancien,zmasse,prlw_ancien)
	5628	CALL water_int(klon,klev,qs_ancien,zmasse,prsw_ancien)
[4523]	5629	CALL water_int(klon,klev,qbs_ancien,zmasse,prbsw_ancien)
[2469]	5630	! !! RomP >>>
[4056]	5631	IF (nqtot > nqo) tr_ancien(:,:,:) = tr_seri(:,:,:)
[2469]	5632	! !! RomP <<<
	5633	!==========================================================================
	5634	! Sorties des tendances pour un point particulier
	5635	! a utiliser en 1D, avec igout=1 ou en 3D sur un point particulier
	5636	! pour le debug
	5637	! La valeur de igout est attribuee plus haut dans le programme
	5638	!==========================================================================
[879]	5639
[2692]	5640	IF (prt_level.ge.1) THEN
[2469]	5641	write(lunout,*) 'FIN DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	5642	write(lunout,*) &
	5643	'nlon,klev,nqtot,debut,lafin,jD_cur, jH_cur, pdtphys pct tlos'
	5644	write(lunout,*) &
	5645	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur ,pdtphys, &
	5646	pctsrf(igout,is_ter), pctsrf(igout,is_lic),pctsrf(igout,is_oce), &
	5647	pctsrf(igout,is_sic)
	5648	write(lunout,*) 'd_t_dyn,d_t_con,d_t_lsc,d_t_ajsb,d_t_ajs,d_t_eva'
[2692]	5649	DO k=1,klev
[2469]	5650	write(lunout,*) d_t_dyn(igout,k),d_t_con(igout,k), &
	5651	d_t_lsc(igout,k),d_t_ajsb(igout,k),d_t_ajs(igout,k), &
	5652	d_t_eva(igout,k)
[2692]	5653	ENDDO
[2469]	5654	write(lunout,*) 'cool,heat'
[2692]	5655	DO k=1,klev
[2469]	5656	write(lunout,*) cool(igout,k),heat(igout,k)
[2692]	5657	ENDDO
[879]	5658
[2469]	5659	!jyg< (En attendant de statuer sur le sort de d_t_oli)
	5660	!jyg! write(lunout,*) 'd_t_oli,d_t_vdf,d_t_oro,d_t_lif,d_t_ec'
	5661	!jyg! do k=1,klev
	5662	!jyg! write(lunout,*) d_t_oli(igout,k),d_t_vdf(igout,k), &
	5663	!jyg! d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
	5664	!jyg! enddo
	5665	write(lunout,*) 'd_t_vdf,d_t_oro,d_t_lif,d_t_ec'
[2692]	5666	DO k=1,klev
[2469]	5667	write(lunout,*) d_t_vdf(igout,k), &
	5668	d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
[2692]	5669	ENDDO
[2469]	5670	!>jyg
[879]	5671
[2469]	5672	write(lunout,*) 'd_ps ',d_ps(igout)
	5673	write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 '
[2692]	5674	DO k=1,klev
[2469]	5675	write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), &
	5676	d_qx(igout,k,1),d_qx(igout,k,2)
[2692]	5677	ENDDO
	5678	ENDIF
[879]	5679
[2469]	5680	!============================================================
	5681	! Calcul de la temperature potentielle
	5682	!============================================================
	5683	DO k = 1, klev
	5684	DO i = 1, klon
	5685	!JYG/IM theta en debut du pas de temps
	5686	!JYG/IM theta(i,k)=t(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5687	!JYG/IM theta en fin de pas de temps de physique
	5688	theta(i,k)=t_seri(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5689	! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers
	5690	! MPL 20130625
	5691	! fth_fonctions.F90 et parkind1.F90
	5692	! sinon thetal=theta
	5693	! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k),
	5694	! : ql_seri(i,k))
	5695	thetal(i,k)=theta(i,k)
	5696	ENDDO
	5697	ENDDO
	5698	!
[879]	5699
[2469]	5700	! 22.03.04 BEG
	5701	!=============================================================
	5702	! Ecriture des sorties
	5703	!=============================================================
[524]	5704	#ifdef CPP_IOIPSL
	5705
[2469]	5706	! Recupere des varibles calcule dans differents modules
	5707	! pour ecriture dans histxxx.nc
[782]	5708
[2469]	5709	! Get some variables from module fonte_neige_mod
	5710	CALL fonte_neige_get_vars(pctsrf, &
[2517]	5711	zxfqcalving, zxfqfonte, zxffonte, zxrunofflic)
[782]	5712
[1507]	5713
[2469]	5714	!=============================================================
	5715	! Separation entre thermiques et non thermiques dans les sorties
	5716	! de fisrtilp
	5717	!=============================================================
[1507]	5718
[2692]	5719	IF (iflag_thermals>=1) THEN
[2469]	5720	d_t_lscth=0.
	5721	d_t_lscst=0.
	5722	d_q_lscth=0.
	5723	d_q_lscst=0.
[2692]	5724	DO k=1,klev
	5725	DO i=1,klon
	5726	IF (ptconvth(i,k)) THEN
[2469]	5727	d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5728	d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5729	ELSE
[2469]	5730	d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5731	d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5732	ENDIF
	5733	ENDDO
	5734	ENDDO
[1507]	5735
[2692]	5736	DO i=1,klon
[2469]	5737	plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1)
	5738	plul_th(i)=prfl(i,1)+psfl(i,1)
[2692]	5739	ENDDO
	5740	ENDIF
[909]	5741
[2469]	5742	!On effectue les sorties:
[1791]	5743
[2630]	5744	#ifdef CPP_Dust
	5745	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	5746	pplay, lmax_th, aerosol_couple, &
[3776]	5747	ok_ade, ok_aie, ivap, ok_sync, &
[2630]	5748	ptconv, read_climoz, clevSTD, &
	5749	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	5750	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	5751	#else
[2469]	5752	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	5753	pplay, lmax_th, aerosol_couple, &
[4523]	5754	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ibs, &
[2496]	5755	ok_sync, ptconv, read_climoz, clevSTD, &
[2665]	5756	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
[4613]	5757	flag_aerosol, flag_aerosol_strat, ok_cdnc,t, u1, v1)
[2630]	5758	#endif
[1791]	5759
[2651]	5760	#ifndef CPP_XIOS
[4619]	5761	CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync)
[2651]	5762	#endif
[687]	5763
[524]	5764	#endif
[4547]	5765	! Petit appelle de sorties pour accompagner le travail sur phyex
	5766	if ( iflag_physiq == 1 ) then
	5767	call output_physiqex(debut,jD_eq,pdtphys,presnivs,paprs,u,v,t,qx,cldfra,0.t,0.t,0.*t,pbl_tke,theta)
	5768	endif
[524]	5769
[2469]	5770	!====================================================================
	5771	! Arret du modele apres hgardfou en cas de detection d'un
	5772	! plantage par hgardfou
	5773	!====================================================================
[2235]	5774
	5775	IF (abortphy==1) THEN
	5776	abort_message ='Plantage hgardfou'
[2311]	5777	CALL abort_physic (modname,abort_message,1)
[2235]	5778	ENDIF
	5779
[2469]	5780	! 22.03.04 END
	5781	!
	5782	!====================================================================
	5783	! Si c'est la fin, il faut conserver l'etat de redemarrage
	5784	!====================================================================
	5785	!
[782]	5786
[3981]	5787	! Disabling calls to the prt_alerte function
	5788	alert_first_call = .FALSE.
[4547]	5789
[3981]	5790
[2469]	5791	IF (lafin) THEN
	5792	itau_phy = itau_phy + itap
	5793	CALL phyredem ("restartphy.nc")
	5794	! open(97,form="unformatted",file="finbin")
	5795	! write(97) u_seri,v_seri,t_seri,q_seri
	5796	! close(97)
[3435]	5797
	5798	IF (is_omp_master) THEN
	5799
	5800	IF (read_climoz >= 1) THEN
	5801	IF (is_mpi_root) CALL nf95_close(ncid_climoz)
[4489]	5802	DEALLOCATE(press_edg_climoz)
	5803	DEALLOCATE(press_cen_climoz)
[3435]	5804	ENDIF
	5805
[2692]	5806	ENDIF
[4127]	5807
[4619]	5808	IF (using_xios) THEN
	5809
[4127]	5810	#ifdef INCA
[4874]	5811	IF (type_trac == 'inca') THEN
	5812	IF (is_omp_master .AND. grid_type==unstructured) THEN
	5813	CALL finalize_inca
	5814	ENDIF
	5815	ENDIF
[3435]	5816	#endif
[4874]	5817
	5818	IF (is_omp_master .and. grid_type==unstructured) CALL xios_context_finalize
	5819	ENDIF
	5820
[3461]	5821	WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
[4874]	5822
[2469]	5823	ENDIF
[1863]	5824
[2469]	5825	! first=.false.
[1863]	5826
[2469]	5827	END SUBROUTINE physiq
[2418]	5828
[2902]	5829	END MODULE physiq_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format