Context Navigation

concvl.F90 @ 5096

Last change on this file since 5096 was 4143, checked in by dcugnet, 2 years ago
Some variables are renamed or replaced by direct equivalents: iso_indnum -> tracers(:)%iso_iName niso_possibles -> niso iqiso -> iqIsoPha ; index_trac -> itZonIso ok_iso_verif -> isoCheck ntraceurs_zone -> nzone ; ntraciso -> ntiso qperemin -> min_qparent ; masseqmin -> min_qmass ; ratiomin -> min_ratio Some renamed variables are only aliased with the older name (using USE <module>, ONLY: <oldName> => <newName>) in routines where they are repeated many times. Few hard-coded indexes are now computed (examples: ilic, iso, ivap, irneb, iq_vap, iq_liq, iso_H2O, iso_HDO, iso_HTO, iso_O17, iso_O18). The IF(isoCheck) test is now embedded in the check_isotopes_seq and check_isotopes_loc routines (lighter calling).
Property svn:keywords set to `Id`
File size: 28.6 KB

Line
1	SUBROUTINE concvl(iflag_clos, &
2	dtime, paprs, pplay, k_upper_cv, &
3	t, q, t_wake, q_wake, s_wake, u, v, tra, ntra, &
4	Ale, Alp, sig1, w01, &
5	d_t, d_q, d_u, d_v, d_tra, &
6	rain, snow, kbas, ktop, sigd, &
7	cbmf, plcl, plfc, wbeff, convoccur, &
8	upwd, dnwd, dnwdbis, &
9	Ma, mip, Vprecip, &
10	cape, cin, tvp, Tconv, iflag, &
11	pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, &
12	qcondc, wd, pmflxr, pmflxs, &
13	!RomP >>>
14	!! . da,phi,mp,dd_t,dd_q,lalim_conv,wght_th)
15	da, phi, mp, phii, d1a, dam, sij, qta, clw, elij, &! RomP
16	dd_t, dd_q, lalim_conv, wght_th, & ! RomP
17	evap, ep, epmlmMm, eplaMm, & ! RomP
18	wdtrainA, wdtrainS, wdtrainM, wght, qtc, sigt, &
19	tau_cld_cv, coefw_cld_cv, & ! RomP+RL, AJ
20	!RomP <<<
21	epmax_diag & ! epmax_cape
22	#ifdef ISO
23	& ,xt,xt_wake,d_xt,xtrain,xtsnow &
24	& ,xtVprecip,xtVprecipi &
25	& ,xtclw,dd_xt,xtevap,xtwdtrainA &
26	#ifdef DIAGISO
27	& , qlp,xtlp,qvp,xtvp & ! juste diagnostique
28	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
29	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
30	& , f_detrainement,q_detrainement,xt_detrainement &
31	#endif
32	#endif
33	& ) ! **************************************************************
34	! *
35	! CONCVL *
36	! *
37	! *
38	! written by : Sandrine Bony-Lena, 17/05/2003, 11.16.04 *
39	! modified by : *
40	! **************************************************************
41
42
43	USE dimphy
44	USE infotrac_phy, ONLY: nbtr
45	#ifdef ISO
46	USE infotrac_phy, ONLY: ntraciso=>ntiso
47	USE isotopes_mod, ONLY: iso_eau, bidouille_anti_divergence, ridicule, &
48	iso_eau,iso_HDO
49	#endif
50	#ifdef ISOVERIF
51	USE isotopes_verif_mod, ONLY: errmax,errmaxrel, &
52	iso_verif_egalite_choix,iso_verif_aberrant,iso_verif_egalite, &
53	iso_verif_noNaN,iso_verif_aberrant_encadre
54	#endif
55	#ifdef ISOTRAC
56	USE isotrac_routines_mod, only: iso_verif_traceur_jbid_vect
57	#ifdef ISOVERIF
58	USE isotopes_verif_mod, ONLY: iso_verif_traceur_vect, &
59	& iso_verif_trac_masse_vect, iso_verif_traceur, &
60	& iso_verif_traceur_justmass
61	#endif
62	#endif
63	USE phys_local_var_mod, ONLY: omega
64	USE print_control_mod, ONLY: prt_level, lunout
65	IMPLICIT NONE
66	! ======================================================================
67	! Auteur(s): S. Bony-Lena (LMD/CNRS) date: ???
68	! Objet: schema de convection de Emanuel (1991) interface
69	! ======================================================================
70	! Arguments:
71	! dtime--input-R-pas d'integration (s)
72	! s-------input-R-la vAleur "s" pour chaque couche
73	! sigs----input-R-la vAleur "sigma" de chaque couche
74	! sig-----input-R-la vAleur de "sigma" pour chaque niveau
75	! psolpa--input-R-la pression au sol (en Pa)
76	! pskapa--input-R-exponentiel kappa de psolpa
77	! h-------input-R-enthAlpie potentielle (CpT/P*kappa)
78	! q-------input-R-vapeur d'eau (en kg/kg)
79
80	! work*: input et output: deux variables de travail,
81	! on peut les mettre a 0 au debut
82	! ALE--------input-R-energie disponible pour soulevement
83	! ALP--------input-R-puissance disponible pour soulevement
84
85	! d_h--------output-R-increment de l'enthAlpie potentielle (h)
86	! d_q--------output-R-increment de la vapeur d'eau
87	! rain-------output-R-la pluie (mm/s)
88	! snow-------output-R-la neige (mm/s)
89	! upwd-------output-R-saturated updraft mass flux (kg/m**2/s)
90	! dnwd-------output-R-saturated downdraft mass flux (kg/m**2/s)
91	! dnwd0------output-R-unsaturated downdraft mass flux (kg/m**2/s)
92	! Ma---------output-R-adiabatic ascent mass flux (kg/m2/s)
93	! mip--------output-R-mass flux shed by adiabatic ascent (kg/m2/s)
94	! Vprecip----output-R-vertical profile of total precipitation (kg/m2/s)
95	! Tconv------output-R-environment temperature seen by convective scheme (K)
96	! Cape-------output-R-CAPE (J/kg)
97	! Cin -------output-R-CIN (J/kg)
98	! Tvp--------output-R-Temperature virtuelle d'une parcelle soulevee
99	! adiabatiquement a partir du niveau 1 (K)
100	! deltapb----output-R-distance entre LCL et base de la colonne (<0 ; Pa)
101	! Ice_flag---input-L-TRUE->prise en compte de la thermodynamique de la glace
102	! dd_t-------output-R-increment de la temperature du aux descentes precipitantes
103	! dd_q-------output-R-increment de la vapeur d'eau du aux desc precip
104	! lalim_conv-
105	! wght_th----
106	! evap-------output-R
107	! ep---------output-R
108	! epmlmMm----output-R
109	! eplaMm-----output-R
110	! wdtrainA---output-R
111	! wdtrainS---output-R
112	! wdtrainM---output-R
113	! wght-------output-R
114	! ======================================================================
115
116
117	include "clesphys.h"
118
119	INTEGER, INTENT(IN) :: iflag_clos
120	REAL, INTENT(IN) :: dtime
121	REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay
122	REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs
123	INTEGER, INTENT(IN) :: k_upper_cv
124	REAL, DIMENSION(klon,klev), INTENT(IN) :: t, q, u, v
125	REAL, DIMENSION(klon,klev), INTENT(IN) :: t_wake, q_wake
126	REAL, DIMENSION(klon), INTENT(IN) :: s_wake
127	REAL, DIMENSION(klon,klev, nbtr),INTENT(IN) :: tra
128	INTEGER, INTENT(IN) :: ntra
129	REAL, DIMENSION(klon), INTENT(IN) :: Ale, Alp
130	!CR:test: on passe lentr et alim_star des thermiques
131	INTEGER, DIMENSION(klon), INTENT(IN) :: lalim_conv
132	REAL, DIMENSION(klon,klev), INTENT(IN) :: wght_th
133	#ifdef ISO
134	REAL, DIMENSION(ntraciso,klon,klev), INTENT(IN) :: xt
135	REAL, DIMENSION(ntraciso,klon,klev), INTENT(IN) :: xt_wake
136	#endif
137
138	REAL, DIMENSION(klon,klev), INTENT(INOUT) :: sig1, w01
139
140	REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_t, d_q, d_u, d_v
141	REAL, DIMENSION(klon,klev, nbtr),INTENT(OUT) :: d_tra
142	REAL, DIMENSION(klon), INTENT(OUT) :: rain, snow
143
144	INTEGER, DIMENSION(klon), INTENT(OUT) :: kbas, ktop
145	REAL, DIMENSION(klon), INTENT(OUT) :: sigd
146	REAL, DIMENSION(klon), INTENT(OUT) :: cbmf, plcl, plfc, wbeff
147	REAL, DIMENSION(klon), INTENT(OUT) :: convoccur
148	REAL, DIMENSION(klon,klev), INTENT(OUT) :: upwd, dnwd, dnwdbis
149
150	!! REAL Ma(klon,klev), mip(klon,klev),Vprecip(klon,klev) !jyg
151	REAL, DIMENSION(klon,klev), INTENT(OUT) :: Ma, mip
152	REAL, DIMENSION(klon,klev+1), INTENT(OUT) :: Vprecip !jyg
153	REAL, DIMENSION(klon), INTENT(OUT) :: cape, cin
154	REAL, DIMENSION(klon,klev), INTENT(OUT) :: tvp
155	REAL, DIMENSION(klon,klev), INTENT(OUT) :: Tconv
156	INTEGER, DIMENSION(klon), INTENT(OUT) :: iflag
157	REAL, DIMENSION(klon), INTENT(OUT) :: pbase, bbase
158	REAL, DIMENSION(klon,klev), INTENT(OUT) :: dtvpdt1, dtvpdq1
159	REAL, DIMENSION(klon), INTENT(OUT) :: dplcldt, dplcldr
160	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qcondc
161	REAL, DIMENSION(klon), INTENT(OUT) :: wd
162	REAL, DIMENSION(klon,klev+1), INTENT(OUT) :: pmflxr, pmflxs
163
164	#ifdef ISO
165	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: d_xt
166	REAL, DIMENSION(ntraciso,klon), INTENT(OUT) :: xtrain
167	REAL, DIMENSION(ntraciso,klon), INTENT(OUT) :: xtsnow
168	REAL, DIMENSION(ntraciso,klon,klev+1), INTENT(OUT) :: xtVprecip
169	#endif
170
171
172	REAL, DIMENSION(klon,klev), INTENT(OUT) :: da, mp
173	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: phi
174	! RomP >>>
175	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: phii
176	REAL, DIMENSION(klon,klev), INTENT(OUT) :: d1a, dam
177	REAL, DIMENSION(klon,klev,klev),INTENT(OUT) :: sij, elij
178	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qta
179	REAL, DIMENSION(klon,klev), INTENT(OUT) :: clw
180	REAL, DIMENSION(klon,klev), INTENT(OUT) :: dd_t, dd_q
181	REAL, DIMENSION(klon,klev), INTENT(OUT) :: evap, ep
182	REAL, DIMENSION(klon,klev), INTENT(OUT) :: eplaMm
183	REAL, DIMENSION(klon,klev,klev), INTENT(OUT) :: epmlmMm
184	REAL, DIMENSION(klon,klev), INTENT(OUT) :: wdtrainA, wdtrainS, wdtrainM
185	! RomP <<<
186	REAL, DIMENSION(klon,klev), INTENT(OUT) :: wght !RL
187	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qtc
188	REAL, DIMENSION(klon,klev), INTENT(OUT) :: sigt
189	REAL, INTENT(OUT) :: tau_cld_cv, coefw_cld_cv
190	REAL, DIMENSION(klon), INTENT(OUT) :: epmax_diag ! epmax_cape
191
192	#ifdef ISO
193	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtevap
194	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtwdtrainA
195	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtclw
196	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: dd_xt
197	! juste diagnostique
198	#ifdef DIAGISO
199	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qlp
200	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtlp
201	REAL, DIMENSION(klon,klev), INTENT(OUT) :: qvp
202	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xtvp
203	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_detrainement
204	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_fluxmasse
205	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_ddft
206	REAL, DIMENSION(klon,klev), INTENT(OUT) :: fq_evapprecip
207	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_detrainement
208	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_fluxmasse
209	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_ddft
210	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: fxt_evapprecip
211	REAL, DIMENSION(klon,klev), INTENT(OUT) :: f_detrainement
212	REAL, DIMENSION(klon,klev), INTENT(OUT) :: q_detrainement
213	REAL, DIMENSION(ntraciso,klon,klev), INTENT(OUT) :: xt_detrainement
214	#endif
215	#endif
216
217
218	!
219	! Local
220	! ----
221	REAL, DIMENSION(klon,klev) :: em_p
222	REAL, DIMENSION(klon,klev+1) :: em_ph
223	REAL :: em_sig1feed ! sigma at lower bound of feeding layer
224	REAL :: em_sig2feed ! sigma at upper bound of feeding layer
225	REAL, DIMENSION(klev) :: em_wght ! weight density determining the feeding mixture
226	REAL, DIMENSION(klon,klev+1) :: Vprecipi !jyg
227	!on enleve le save
228	! SAVE em_sig1feed,em_sig2feed,em_wght
229
230	REAL, DIMENSION(klon) :: rflag
231	REAL, DIMENSION(klon) :: plim1, plim2
232	REAL, DIMENSION(klon) :: ptop2
233	REAL, DIMENSION(klon,klev) :: asupmax
234	REAL, DIMENSION(klon) :: supmax0, asupmaxmin
235	REAL :: zx_t, zdelta, zx_qs, zcor
236	!
237	! INTEGER iflag_mix
238	! SAVE iflag_mix
239	INTEGER :: noff, minorig
240	INTEGER :: i,j, k, itra
241	REAL, DIMENSION(klon,klev) :: qs, qs_wake
242	!LF SAVE cbmf
243	!IM/JYG REAL, SAVE, ALLOCATABLE :: cbmf(:)
244	!!!$OMP THREADPRIVATE(cbmf)!
245	REAL, DIMENSION(klon) :: cbmflast
246	#ifdef ISO
247	REAL, DIMENSION(ntraciso,klon,klev+1) :: xtVprecipi
248	INTEGER :: ixt
249	#endif
250
251
252	! Variables supplementaires liees au bilan d'energie
253	! Real paire(klon)
254	!LF Real ql(klon,klev)
255	! Save paire
256	!LF Save ql
257	!LF Real t1(klon,klev),q1(klon,klev)
258	!LF Save t1,q1
259	! Data paire /1./
260	REAL, SAVE, ALLOCATABLE :: ql(:, :), q1(:, :), t1(:, :)
261	!$OMP THREADPRIVATE(ql, q1, t1)
262	! pas besoin d'isos ici
263
264	! Variables liees au bilan d'energie et d'enthAlpi
265	REAL ztsol(klon)
266	REAL h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
267	h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
268	SAVE h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
269	h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
270	!$OMP THREADPRIVATE(h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot)
271	!$OMP THREADPRIVATE(h_qs_tot, qw_tot, ql_tot, qs_tot , ec_tot)
272	REAL d_h_vcol, d_h_dair, d_qt, d_qw, d_ql, d_qs, d_ec
273	REAL d_h_vcol_phy
274	REAL fs_bound, fq_bound
275	SAVE d_h_vcol_phy
276	!$OMP THREADPRIVATE(d_h_vcol_phy)
277	REAL zero_v(klon)
278	CHARACTER *15 ztit
279	INTEGER ip_ebil ! PRINT level for energy conserv. diag.
280	SAVE ip_ebil
281	DATA ip_ebil/2/
282	!$OMP THREADPRIVATE(ip_ebil)
283	INTEGER if_ebil ! level for energy conserv. dignostics
284	SAVE if_ebil
285	DATA if_ebil/2/
286	!$OMP THREADPRIVATE(if_ebil)
287	!+jld ec_conser
288	REAL d_t_ec(klon, klev) ! tendance du a la conersion Ec -> E thermique
289	REAL zrcpd
290	!-jld ec_conser
291	!LF
292	INTEGER nloc
293	LOGICAL, SAVE :: first = .TRUE.
294	!$OMP THREADPRIVATE(first)
295	INTEGER, SAVE :: itap, igout
296	!$OMP THREADPRIVATE(itap, igout)
297
298
299	include "YOMCST.h"
300	include "YOMCST2.h"
301	include "YOETHF.h"
302	include "FCTTRE.h"
303	!jyg<
304	include "conema3.h"
305	!>jyg
306
307	IF (first) THEN
308	! Allocate some variables LF 04/2008
309
310	!IM/JYG allocate(cbmf(klon))
311	ALLOCATE (ql(klon,klev))
312	ALLOCATE (t1(klon,klev))
313	ALLOCATE (q1(klon,klev))
314	!
315	convoccur(:) = 0.
316	!
317	itap = 0
318	igout = klon/2 + 1/klon
319	END IF
320	! Incrementer le compteur de la physique
321	itap = itap + 1
322
323	! Copy T into Tconv
324	DO k = 1, klev
325	DO i = 1, klon
326	Tconv(i, k) = t(i, k)
327	END DO
328	END DO
329
330	IF (if_ebil>=1) THEN
331	DO i = 1, klon
332	ztsol(i) = t(i, 1)
333	zero_v(i) = 0.
334	DO k = 1, klev
335	ql(i, k) = 0.
336	END DO
337	END DO
338	END IF
339
340	! ym
341	snow(:) = 0
342	#ifdef ISO
343	xtsnow(:,:)=0
344	#endif
345
346	IF (first) THEN
347	first = .FALSE.
348
349	! ===========================================================================
350	! READ IN PARAMETERS FOR THE CLOSURE AND THE MIXING DISTRIBUTION
351	! ===========================================================================
352
353	IF (iflag_con==3) THEN
354	! CALL cv3_inicp()
355	CALL cv3_inip()
356	END IF
357
358	! ===========================================================================
359	! READ IN PARAMETERS FOR CONVECTIVE INHIBITION BY TROPOS. DRYNESS
360	! ===========================================================================
361
362	! c$$$ open (56,file='supcrit.data')
363	! c$$$ read (56,*) Supcrit1, Supcrit2
364	! c$$$ close (56)
365
366	IF (prt_level>=10) WRITE (lunout, *) 'supcrit1, supcrit2', supcrit1, supcrit2
367
368	! ===========================================================================
369	! Initialisation pour les bilans d'eau et d'energie
370	! ===========================================================================
371	IF (if_ebil>=1) d_h_vcol_phy = 0.
372
373	DO i = 1, klon
374	cbmf(i) = 0.
375	!! plcl(i) = 0.
376	sigd(i) = 0.
377	END DO
378	END IF !(first)
379
380	! Initialisation a chaque pas de temps
381	plfc(:) = 0.
382	wbeff(:) = 100.
383	plcl(:) = 0.
384
385	DO k = 1, klev + 1
386	DO i = 1, klon
387	em_ph(i, k) = paprs(i, k)/100.0
388	pmflxr(i, k) = 0.
389	pmflxs(i, k) = 0.
390	END DO
391	END DO
392
393	DO k = 1, klev
394	DO i = 1, klon
395	em_p(i, k) = pplay(i, k)/100.0
396	END DO
397	END DO
398
399
400	! Feeding layer
401
402	em_sig1feed = 1.
403	!jyg<
404	! em_sig2feed = 0.97
405	em_sig2feed = cvl_sig2feed
406	!>jyg
407	! em_sig2feed = 0.8
408	! Relative Weight densities
409	DO k = 1, klev
410	em_wght(k) = 1.
411	END DO
412	!CRtest: couche alim des tehrmiques ponderee par a*
413	! DO i = 1, klon
414	! do k=1,lalim_conv(i)
415	! em_wght(k)=wght_th(i,k)
416	! print*,'em_wght=',em_wght(k),wght_th(i,k)
417	! end do
418	! END DO
419
420	IF (iflag_con==4) THEN
421	DO k = 1, klev
422	DO i = 1, klon
423	zx_t = t(i, k)
424	zdelta = max(0., sign(1.,rtt-zx_t))
425	zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
426	zcor = 1./(1.-retv*zx_qs)
427	qs(i, k) = zx_qs*zcor
428	END DO
429	DO i = 1, klon
430	zx_t = t_wake(i, k)
431	zdelta = max(0., sign(1.,rtt-zx_t))
432	zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
433	zcor = 1./(1.-retv*zx_qs)
434	qs_wake(i, k) = zx_qs*zcor
435	END DO
436	END DO
437	ELSE ! iflag_con=3 (modif de puristes qui fait la diffce pour la convergence numerique)
438	DO k = 1, klev
439	DO i = 1, klon
440	zx_t = t(i, k)
441	zdelta = max(0., sign(1.,rtt-zx_t))
442	zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
443	zx_qs = min(0.5, zx_qs)
444	zcor = 1./(1.-retv*zx_qs)
445	zx_qs = zx_qs*zcor
446	qs(i, k) = zx_qs
447	END DO
448	DO i = 1, klon
449	zx_t = t_wake(i, k)
450	zdelta = max(0., sign(1.,rtt-zx_t))
451	zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
452	zx_qs = min(0.5, zx_qs)
453	zcor = 1./(1.-retv*zx_qs)
454	zx_qs = zx_qs*zcor
455	qs_wake(i, k) = zx_qs
456	END DO
457	END DO
458	END IF ! iflag_con
459
460	! ------------------------------------------------------------------
461
462	! Main driver for convection:
463	! iflag_con=3 -> nvlle version de KE (JYG)
464	! iflag_con = 30 -> equivAlent to convect3
465	! iflag_con = 4 -> equivAlent to convect1/2
466
467
468	IF (iflag_con==30) THEN
469
470
471	#ifdef ISO
472	#ifdef ISOVERIF
473	do k = 1, klev
474	do i = 1, klon
475	do ixt=1,ntraciso
476	call iso_verif_noNaN(xt(ixt,i,k),'concvl 394')
477	enddo
478	enddo !do i = 1, klon
479	enddo !do k = 1, klev
480	if (iso_eau.gt.0) then
481	do k = 1, klev
482	do i = 1, klon
483	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
484	& 'concvl 174',errmax,errmaxrel)
485	enddo !do i = 1, klon
486	enddo !do k = 1, klev
487	endif !if (iso_eau.gt.0) then
488	if (iso_HDO.gt.0) then
489	do k = 1, klev
490	do i = 1, klon
491	if (q(i,k).gt.ridicule) then
492	call iso_verif_aberrant(xt(iso_hdo,i,k)/q(i,k),'concvl 175')
493	endif ! if (q(i,k).gt.ridicule) then
494	enddo
495	enddo
496	endif !if (iso_eau.gt.0) then
497	#ifdef ISOTRAC
498	do k = 1, klev
499	do i = 1, klon
500	call iso_verif_traceur(xt(1,i,k),'concvl 218')
501	enddo
502	enddo
503	#endif
504	write(,) 'concvl 170: avant appel cv_driver'
505	#endif
506	! ISOVERIF ! end verif
507	#endif
508
509	! print *, '-> cv_driver' !jyg
510	CALL cv_driver(klon, klev, klevp1, ntra, iflag_con, &
511	t, q, qs, u, v, tra, &
512	em_p, em_ph, iflag, &
513	d_t, d_q, d_u, d_v, d_tra, rain, &
514	Vprecip, cbmf, sig1, w01, & !jyg
515	kbas, ktop, &
516	dtime, Ma, upwd, dnwd, dnwdbis, qcondc, wd, cape, &
517	da, phi, mp, phii, d1a, dam, sij, clw, elij, & !RomP
518	evap, ep, epmlmMm, eplaMm, & !RomP
519	wdtrainA, wdtrainM, & !RomP
520	epmax_diag & ! epmax_cape
521	#ifdef ISO
522	& , xt,d_xt &
523	& , xtrain,xtVprecip &
524	& , xtevap,xtclw,xtwdtrainA &
525	#ifdef DIAGISO
526	& , qlp,xtlp,qvp,xtvp & ! juste diagnostique
527	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
528	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
529	& , f_detrainement,q_detrainement,xt_detrainement &
530	#endif
531	#endif
532	& )
533	! print *, 'cv_driver ->' !jyg
534
535	#ifdef ISO
536	! verif
537	#ifdef ISOVERIF
538	write(,) 'concvl 463: après appel cv_driver'
539	do k = 1, klev
540	do i = 1, klon
541	if (iso_eau.gt.0) then
542	call iso_verif_egalite(xt(iso_eau,i,k),q(i,k),'concvl 203')
543	call iso_verif_egalite(xt_wake(iso_eau,i,k),q_wake(i,k),'concvl 204')
544	call iso_verif_egalite(d_xt(iso_eau,i,k),d_q(i,k), &
545	& 'concvl 452')
546	endif !if (iso_eau.gt.0) then
547	#ifdef DIAGISO
548	do ixt=1,ntraciso
549	call iso_verif_noNaN(xt(ixt,i,k),'concvl 460')
550	call iso_verif_noNaN(xtlp(ixt,i,k),'concvl 295')
551	call iso_verif_noNaN(xtvp(ixt,i,k),'concvl 260')
552	enddo
553	#endif
554	enddo
555	enddo
556	#ifdef ISOTRAC
557	call iso_verif_traceur_vect(xt,klon,klev,'concvl 218')
558	call iso_verif_trac_masse_vect(d_xt,klon,klev, &
559	& 'concvl 464',errmax,errmaxrel)
560	#endif
561	#endif
562	! end verif
563	#endif
564
565	DO i = 1, klon
566	cbmf(i) = Ma(i, kbas(i))
567	END DO
568
569	!RL
570	wght(:, :) = 0.
571	DO i = 1, klon
572	wght(i, 1) = 1.
573	END DO
574	!RL
575
576	ELSE
577
578	!LF necessary for gathered fields
579	nloc = klon
580	#ifdef ISOVERIF
581	write(,) 'concvl 581: juste avant appel de cva_driver'
582	#endif
583	CALL cva_driver(klon, klev, klev+1, ntra, nloc, k_upper_cv, &
584	iflag_con, iflag_mix, iflag_ice_thermo, &
585	iflag_clos, ok_conserv_q, dtime, cvl_comp_threshold, &
586	t, q, qs, t_wake, q_wake, qs_wake, s_wake, u, v, tra, &
587	em_p, em_ph, &
588	Ale, Alp, omega, &
589	em_sig1feed, em_sig2feed, em_wght, &
590	iflag, d_t, d_q, d_u, d_v, d_tra, rain, kbas, ktop, &
591	cbmf, plcl, plfc, wbeff, sig1, w01, ptop2, sigd, &
592	Ma, mip, Vprecip, Vprecipi, upwd, dnwd, dnwdbis, qcondc, wd, &
593	cape, cin, tvp, &
594	dd_t, dd_q, plim1, plim2, asupmax, supmax0, &
595	asupmaxmin, lalim_conv, &
596	!AC!+!RomP+jyg
597	!! da,phi,mp,phii,d1a,dam,sij,clw,elij, & ! RomP
598	!! evap,ep,epmlmMm,eplaMm, ! RomP
599	da, phi, mp, phii, d1a, dam, sij, wght, & ! RomP+RL
600	qta, clw, elij, evap, ep, epmlmMm, eplaMm, & ! RomP+RL
601	wdtrainA, wdtrainS, wdtrainM, qtc, sigt, &
602	tau_cld_cv, coefw_cld_cv, & ! RomP,AJ
603	!AC!+!RomP+jyg
604	epmax_diag & ! epmax_cape
605	#ifdef ISO
606	& ,xt,xt_wake,d_xt, xtrain &
607	& ,xtvprecip,xtvprecipi &
608	& ,xtclw,dd_xt,xtevap,xtwdtrainA &
609	#ifdef DIAGISO
610	& , qlp,xtlp,qvp,xtvp &
611	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
612	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
613	& , f_detrainement,q_detrainement,xt_detrainement &
614	#endif
615	#endif
616	& )
617	END IF
618	! ------------------------------------------------------------------
619	IF (prt_level>=10) WRITE (lunout, *) ' cva_driver -> cbmf,plcl,plfc,wbeff, d_t, d_q ', &
620	cbmf(1), plcl(1), plfc(1), wbeff(1), d_t(1,1), d_q(1,1)
621
622	DO i = 1, klon
623	rain(i) = rain(i)/86400.
624	rflag(i) = iflag(i)
625	#ifdef ISO
626	do ixt = 1, ntraciso
627	xtrain(ixt,i) = xtrain(ixt,i)/86400.
628	enddo
629	#endif
630	END DO
631
632	DO k = 1, klev
633	DO i = 1, klon
634	d_t(i, k) = dtime*d_t(i, k)
635	d_q(i, k) = dtime*d_q(i, k)
636	d_u(i, k) = dtime*d_u(i, k)
637	d_v(i, k) = dtime*d_v(i, k)
638	#ifdef ISO
639	do ixt = 1, ntraciso
640	d_xt(ixt,i,k) = dtime*d_xt(ixt,i,k)
641	enddo
642	#endif
643	END DO
644	END DO
645
646
647	#ifdef ISO
648	#ifdef ISOVERIF
649	! k=1
650	! i= 538
651	write(,) 'concvl 640'
652	! write(,) 'q(i,k),d_q(i,k)=', q(i,k),d_q(i,k)
653	! write(,) 'xt(iso_HDO,i,k),d_xt(iso_HDO,i,k)=', &
654	! & xt(iso_HDO,i,k),d_xt(iso_HDO,i,k)
655	DO k = 1, klev
656	DO i = 1, klon
657	if (iso_HDO.gt.0) then
658	if (q(i,k).gt.ridicule) then
659	call iso_verif_aberrant_encadre((xt(iso_HDO,i,k) &
660	& +d_xt(iso_HDO,i,k))/(q(i,k)+d_q(i,k)),'concvl 250')
661	endif !if (q_seri(i,k).gt.ridicule) then
662	endif !if (iso_HDO.gt.0) then
663	if (iso_eau.gt.0) then
664	call iso_verif_egalite_choix(d_xt(iso_eau,i,k), &
665	& d_q(i,k),'concvl 530',errmax*dtime,errmaxrel)
666	endif !if (iso_HDO.gt.0) then
667	#ifdef ISOTRAC
668	call iso_verif_traceur_justmass(d_xt(1,i,k),'concvl 316')
669	#endif
670	END DO
671	END DO
672	#endif
673	#endif
674
675	#ifdef ISO
676	if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then
677	do k=1,klev
678	do i=1,klon
679	d_xt(iso_eau,i,k)=d_q(i,k)
680	enddo !do i=1,klon
681	enddo !do k=1,klev
682	#ifdef ISOTRAC
683	call iso_verif_traceur_jbid_vect(d_xt, &
684	& klon,klev)
685	#endif
686	endif !if ((iso_eau.gt.0).and.(bidouille_anti_divergence)) then
687	#endif
688
689	IF (iflag_con==3) THEN
690	DO i = 1,klon
691	IF (wbeff(i) > 100. .OR. wbeff(i) == 0 .OR. iflag(i) > 3) THEN
692	wbeff(i) = 0.
693	convoccur(i) = 0.
694	ELSE
695	convoccur(i) = 1.
696	ENDIF
697	ENDDO
698	ENDIF
699
700	IF (iflag_con==30) THEN
701	DO itra = 1, ntra
702	DO k = 1, klev
703	DO i = 1, klon
704	!RL! d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
705	d_tra(i, k, itra) = 0.
706	END DO
707	END DO
708	END DO
709	END IF
710
711	!!AC!
712	IF (iflag_con==3) THEN
713	DO itra = 1, ntra
714	DO k = 1, klev
715	DO i = 1, klon
716	!RL! d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
717	d_tra(i, k, itra) = 0.
718	END DO
719	END DO
720	END DO
721	END IF
722	!!AC!
723
724	DO k = 1, klev
725	DO i = 1, klon
726	t1(i, k) = t(i, k) + d_t(i, k)
727	q1(i, k) = q(i, k) + d_q(i, k)
728	! juste diag: pas besoin d'isos ici
729	END DO
730	END DO
731
732	! !jyg
733	IF (iflag_con == 30 .OR. iflag_ice_thermo ==0) THEN
734	! --Separation neige/pluie (pour diagnostics) !jyg
735	DO k = 1, klev !jyg
736	DO i = 1, klon !jyg
737	IF (t1(i,k)<rtt) THEN !jyg
738	pmflxs(i, k) = Vprecip(i, k) !jyg
739	ELSE !jyg
740	pmflxr(i, k) = Vprecip(i, k) !jyg
741	END IF !jyg
742	END DO !jyg
743	END DO !jyg
744	ELSE
745	DO k = 1, klev !jyg
746	DO i = 1, klon !jyg
747	pmflxs(i, k) = Vprecipi(i, k) !jyg
748	pmflxr(i, k) = Vprecip(i, k)-Vprecipi(i, k) !jyg
749	END DO !jyg
750	END DO !jyg
751	ENDIF
752
753	! c IF (if_ebil.ge.2) THEN
754	! c ztit='after convect'
755	! c CALL diagetpq(paire,ztit,ip_ebil,2,2,dtime
756	! c e , t1,q1,ql,qs,u,v,paprs,pplay
757	! c s , d_h_vcol, d_qt, d_qw, d_ql, d_qs, d_ec)
758	! c call diagphy(paire,ztit,ip_ebil
759	! c e , zero_v, zero_v, zero_v, zero_v, zero_v
760	! c e , zero_v, rain, zero_v, ztsol
761	! c e , d_h_vcol, d_qt, d_ec
762	! c s , fs_bound, fq_bound )
763	! c END IF
764
765
766	! les traceurs ne sont pas mis dans cette version de convect4:
767	IF (iflag_con==4) THEN
768	DO itra = 1, ntra
769	DO k = 1, klev
770	DO i = 1, klon
771	d_tra(i, k, itra) = 0.
772	END DO
773	END DO
774	END DO
775	END IF
776	! print*, 'concvl->: dd_t,dd_q ',dd_t(1,1),dd_q(1,1)
777
778	DO k = 1, klev
779	DO i = 1, klon
780	dtvpdt1(i, k) = 0.
781	dtvpdq1(i, k) = 0.
782	END DO
783	END DO
784	DO i = 1, klon
785	dplcldt(i) = 0.
786	dplcldr(i) = 0.
787	END DO
788
789	IF (prt_level>=20) THEN
790	DO k = 1, klev
791	! print*,'physiq apres_add_con i k it d_u d_v d_t d_q qdl0',igout, &
792	! k,itap,d_u_con(igout,k) ,d_v_con(igout,k), d_t_con(igout,k), &
793	! d_q_con(igout,k),dql0(igout,k)
794	! print*,'phys apres_add_con itap Ma cin ALE ALP wak t q undi t q', &
795	! itap,Ma(igout,k),cin(igout),ALE(igout), ALP(igout), &
796	! t_wake(igout,k),q_wake(igout,k),t_undi(igout,k),q_undi(igout,k)
797	! print*,'phy apres_add_con itap CON rain snow EMA wk1 wk2 Vpp mip', &
798	! itap,rain_con(igout),snow_con(igout),ema_work1(igout,k), &
799	! ema_work2(igout,k),Vprecip(igout,k), mip(igout,k)
800	! print*,'phy apres_add_con itap upwd dnwd dnwd0 cape tvp Tconv ', &
801	! itap,upwd(igout,k),dnwd(igout,k),dnwd0(igout,k),cape(igout), &
802	! tvp(igout,k),Tconv(igout,k)
803	! print*,'phy apres_add_con itap dtvpdt dtvdq dplcl dplcldr qcondc', &
804	! itap,dtvpdt1(igout,k),dtvpdq1(igout,k),dplcldt(igout), &
805	! dplcldr(igout),qcondc(igout,k)
806	! print*,'phy apres_add_con itap wd pmflxr Kpmflxr Kp1 Kpmflxs Kp1', &
807	! itap,wd(igout),pmflxr(igout,k),pmflxr(igout,k+1),pmflxs(igout,k), &
808	! pmflxs(igout,k+1)
809	! print*,'phy apres_add_con itap da phi mp ftd fqd lalim wgth', &
810	! itap,da(igout,k),phi(igout,k,k),mp(igout,k),ftd(igout,k), &
811	! fqd(igout,k),lalim_conv(igout),wght_th(igout,k)
812	END DO
813	END IF !(prt_level.EQ.20) THEN
814
815	RETURN
816	END SUBROUTINE concvl
817

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format