source: LMDZ6/branches/Test_modipsl/libf/phylmd/ecrad/radiation_setup.F90 @ 5426

MODULE RADIATION_SETUP

! RADIATION_SETUP - Setting up modular radiation scheme
!
! (C) Copyright 2015- ECMWF.
!
! This software is licensed under the terms of the Apache Licence Version 2.0
! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0.
!
! In applying this licence, ECMWF does not waive the privileges and immunities
! granted to it by virtue of its status as an intergovernmental organisation
! nor does it submit to any jurisdiction.
!
! PURPOSE
! -------
!   The modular radiation scheme is contained in a separate
!   library. SETUP_RADIATION_SCHEME in this module sets up a small
!   number of global variables needed to store the information for it.
!
!   Lower case is used for variables and types taken from the
!   radiation library
!
! INTERFACE
! ---------
!   SETUP_RADIATION_SCHEME is called from SUECRAD.  The radiation
!   scheme is actually run using the RADIATION_SCHEME routine (not in
!   this module).
!
! AUTHOR
! ------
!   Robin Hogan, ECMWF
!   Original: 2015-09-16
!
! MODIFICATIONS
! -------------
!
!-----------------------------------------------------------------------

  USE PARKIND1,         ONLY : JPRB
  USE radiation_config, ONLY : config_type, &
       &                       ISolverMcICA, ISolverSpartacus, &
       &                       ILiquidModelSlingo, ILiquidModelSOCRATES, &
       &                       IIceModelFu, IIceModelBaran, &
       &                       IOverlapExponentialRandom

  IMPLICIT NONE

  ! Store configuration information for the radiation scheme in a
  ! global variable
  type(config_type) :: rad_config

  ! Ultraviolet weightings
  INTEGER         :: NWEIGHT_UV
  INTEGER         :: IBAND_UV(100)
  REAL(KIND=JPRB) :: WEIGHT_UV(100)
  ! Photosynthetically active radiation weightings
  INTEGER         :: NWEIGHT_PAR
  INTEGER         :: IBAND_PAR(100)
  REAL(KIND=JPRB) :: WEIGHT_PAR(100)

  ! Background aerosol is specified in an ugly way: using the old
  ! Tegen fields that are in terms of optical depth, and converted to
  ! mass mixing ratio via the relevant mass-extinction coefficient
  INTEGER, PARAMETER :: ITYPE_TROP_BG_AER = 8 ! hydrophobic organic
  INTEGER, PARAMETER :: ITYPE_STRAT_BG_AER=12 ! non-absorbing sulphate
  REAL(KIND=JPRB)    :: TROP_BG_AER_MASS_EXT
  REAL(KIND=JPRB)    :: STRAT_BG_AER_MASS_EXT

CONTAINS

  ! This routine copies information between the LMDZ radiation
  ! configuration (stored in global variables) and the radiation
  ! configuration of the modular radiation scheme (stored in
  ! rad_config).  The optional input logical LOUTPUT controls whether
  ! to print lots of information during the setup stage (default is
  ! no).
! AI At the end of the routine, the parameters are read in namelist
!    
  SUBROUTINE SETUP_RADIATION_SCHEME(LOUTPUT)

    USE YOMHOOK,  ONLY : LHOOK, DR_HOOK
! AI (propre a IFS)    
!    USE YOMLUN,   ONLY : NULNAM, NULOUT, NULERR
    USE YOMLUN,   ONLY : NULOUT, NULERR
    USE YOESRTWN, ONLY : NMPSRTM
! AI ATTENTION (propre a IFS)
!    USE YOERAD,   ONLY : YRERAD

    USE radiation_interface,      ONLY : setup_radiation
!    USE radiation_aerosol_optics, ONLY : dry_aerosol_sw_mass_extinction

! AI (propre a IFS)    
!#include "posname.intfb.h"

    ! Whether or not to provide information on the radiation scheme
    ! configuration
    LOGICAL, INTENT(IN), OPTIONAL :: LOUTPUT

    ! Verbosity of configuration information 0=none, 1=warning,
    ! 2=info, 3=progress, 4=detailed, 5=debug
    INTEGER :: IVERBOSESETUP
    INTEGER :: ISTAT

    REAL(KIND=JPRB) :: ZHOOK_HANDLE

    character(len=512) :: file_name

    logical :: lprint_setp=.TRUE.

    IF (LHOOK) CALL DR_HOOK('RADIATION_SETUP:SETUP_RADIATION_SCHEME',0,ZHOOK_HANDLE)

    ! *** GENERAL SETUP ***

    ! Configure verbosity of setup of radiation scheme
 
    print*,'********** Dans radiation_setup *****************'

    IVERBOSESETUP = 4 ! Provide plenty of information
    IF (PRESENT(LOUTPUT)) THEN
      IF (.NOT. LOUTPUT) THEN
        IVERBOSESETUP = 1 ! Warnings and errors only
      ENDIF
    ENDIF
    rad_config%iverbosesetup = IVERBOSESETUP
    if (lprint_setp) then
      print*,'Dans radiation_setup '
      print*,'rad_config%iverbosesetup =', rad_config%iverbosesetup
    endif

    IF (IVERBOSESETUP > 1) THEN
      WRITE(NULOUT,'(a)') '-------------------------------------------------------------------------------'
      WRITE(NULOUT,'(a)') 'RADIATION_SETUP'
    ENDIF

    ! Normal operation of the radiation scheme displays only errors
    ! and warnings
    rad_config%iverbose = 5
    if (lprint_setp) then
      print*,'rad_config%iverbose =', rad_config%iverbose
    endif
    ! For the time being, ensure a valid default directory name
    rad_config%directory_name = 'data'
    if (lprint_setp) then
      print*,'rad_config%directory_name =', rad_config%directory_name
    endif

    ! Do we do Hogan and Bozzo (2014) approximate longwave updates?
! AI ATTENTION (ifs : )
     ! AI (propre a IFS)
!    rad_config%do_lw_derivatives = YRERAD%LAPPROXLWUPDATE
    rad_config%do_lw_derivatives = .false.
    if (lprint_setp) then
      print*,'rad_config%do_lw_derivatives =', rad_config%do_lw_derivatives    
    endif

    ! Surface spectral fluxes are needed for spectral shortwave albedo
    ! calculation
! AI ATTENTION test (ifs : T)
!    rad_config%do_save_spectral_flux = .FALSE.
    rad_config%do_surface_sw_spectral_flux = .TRUE.
    if (lprint_setp) then
      print*,'rad_config%do_surface_sw_spectral_flux =', &
            rad_config%do_surface_sw_spectral_flux
    endif

    ! *** SETUP GAS OPTICS ***

! routine below does not have to (ifs : F)
    print*,'i_gas_model =',rad_config%i_gas_model
    rad_config%do_setup_ifsrrtm = .TRUE.
    if (lprint_setp) then
      print*,'rad_config%do_setup_ifsrrtm =', rad_config%do_setup_ifsrrtm
    endif

    ! *** SETUP CLOUD OPTICS ***

    ! Setup liquid optics
! AI ATTENTION
! Choix offline : liquid_model_name = "SOCRATES"
      rad_config%i_liq_model = ILiquidModelSOCRATES
      if (lprint_setp) then
        print*,'rad_config%i_liq_model =',rad_config%i_liq_model
      endif

    ! Setup ice optics
! Choix offline : ice_model_name    = "Fu-IFS"
      rad_config%i_ice_model = IIceModelFu
      if (lprint_setp) then
        print*,'rad_config%i_ice_model =', rad_config%i_ice_model
      endif

! AI (propre a IFS)      
    ! For consistency with earlier versions of the IFS radiation
    ! scheme, we perform shortwave delta-Eddington scaling *after* the
    ! merge of the cloud, aerosol and gas optical properties.  Set
    ! this to "false" to do the scaling on the cloud and aerosol
    ! properties separately before merging with gases. Note that this
    ! is not compatible with the SPARTACUS solver.
    rad_config%do_sw_delta_scaling_with_gases = .FALSE.
    if (lprint_setp) then
      print*,'rad_config%do_sw_delta_scaling_with_gases =', &
            rad_config%do_sw_delta_scaling_with_gases
    endif

! AI (propre a IFS)    
    ! Use Exponential-Exponential cloud overlap to match original IFS
    ! implementation of Raisanen cloud generator
    rad_config%i_overlap_scheme = IOverlapExponentialRandom
    if (lprint_setp) then
      print*,'rad_config%i_overlap_scheme =', rad_config%i_overlap_scheme
    endif

    ! *** SETUP AEROSOLS ***
! AI ATTENTION 
!    rad_config%use_aerosols = .TRUE. !(ifs)
    rad_config%use_aerosols = .FALSE.
    if (lprint_setp) then
      print*,'rad_config%use_aerosols =', rad_config%use_aerosols
    endif

! *** SETUP SOLVER ***

    ! 3D effects are off by default (ifs)
    rad_config%do_3d_effects = .TRUE.
    if (lprint_setp) then
      print*,'rad_config%do_3d_effects=', rad_config%do_3d_effects
    endif

    ! Select longwave solver
! AI ATTENTION
      rad_config%i_solver_lw = ISolverSpartacus
      if (lprint_setp) then
        print*,'rad_config%i_solver_lw =', rad_config%i_solver_lw
      endif

      rad_config%i_solver_sw = ISolverSpartacus
      if (lprint_setp) then
        print*,'rad_config%i_solver_sw =', rad_config%i_solver_sw
      endif

    ! SPARTACUS solver requires delta scaling to be done separately
    ! for clouds & aerosols
    IF (rad_config%i_solver_sw == ISolverSpartacus) THEN
      rad_config%do_sw_delta_scaling_with_gases = .FALSE.
    ENDIF

    ! Do we represent longwave scattering?
    rad_config%do_lw_cloud_scattering = .TRUE.
    rad_config%do_lw_aerosol_scattering = .TRUE.
    if (lprint_setp) then
      print*,'rad_config%do_lw_cloud_scattering =', &
           rad_config%do_lw_cloud_scattering
      print*,'rad_config%do_lw_aerosol_scattering =', &
           rad_config%do_lw_aerosol_scattering
    endif

    ! *** IMPLEMENT SETTINGS ***

    ! For advanced configuration, the configuration data for the
    ! "radiation" project can specified directly in the namelist.
    ! However, the variable naming convention is not consistent with
    ! the rest of the IFS.  For basic configuration there are specific
    ! variables in the NAERAD namelist available in the YRERAD
    ! structure.

! AI ATTENTION (parameters read in namelist file)
    file_name="namelist_ecrad"
    call rad_config%read(file_name=file_name)

    ! Use configuration data to set-up radiation scheme, including
    ! reading scattering datafiles
    CALL setup_radiation(rad_config)

    ! Populate the mapping between the 14 RRTM shortwave bands and the
    ! 6 albedo inputs. The mapping according to the stated wavelength
    ! ranges of the 6-band model does not match the hard-wired mapping
    ! in NMPSRTM, but only the hard-wired values produce sensible
    ! results...
    ! Note that NMPSRTM(:)=(/  6, 6, 5, 5, 5, 5, 5, 4, 4, 3, 2, 2, 1, 6 /)
! AI (6 albedo SW bands) 
    call rad_config%define_sw_albedo_intervals(6, &
       &  [0.25e-6_jprb, 0.44e-6_jprb, 0.69e-6_jprb, &
       &   1.19e-6_jprb, 2.38e-6_jprb], [1,2,3,4,5,6])
    ! Likewise between the 16 RRTM longwave bands and the 2 emissivity
    ! inputs (info taken from rrtm_ecrt_140gp_mcica.F90) representing
    ! outside and inside the window region of the spectrum
!     rad_config%i_emiss_from_band_lw = (/ 1,1,1,1,1,2,2,2,1,1,1,1,1,1,1,1 /)
! AI ATTENTION ?????
!!    call rad_config%define_lw_emiss_intervals(3, &
!!         &  (/ 8.0e-6_jprb,13.0e-6_jprb /),  (/ 1,2,1 /))

!    ! Get spectral weightings for UV and PAR
    call rad_config%get_sw_weights(0.2e-6_jprb, 0.4415e-6_jprb, &
         &  NWEIGHT_UV, IBAND_UV, WEIGHT_UV, 'ultraviolet')
    call rad_config%get_sw_weights(0.4e-6_jprb, 0.7e-6_jprb, &
         &  NWEIGHT_PAR, IBAND_PAR, WEIGHT_PAR, &
         &  'photosynthetically active radiation, PAR')

     rad_config%i_aerosol_type_map(1:13) = (/ &
           &  -1, &  ! Sea salt, size bin 1 (OPAC)
           &  -2, &  ! Sea salt, size bin 2 (OPAC)
           &  -3, &  ! Sea salt, size bin 3 (OPAC)
           &  -4, &  ! Hydrophilic organic matter (OPAC)
           &  -5, &  ! Ammonium sulphate (OPAC)
           &  -6, &
           &  -7, &
           &   1, &
           &   2, &
           &   3, &
           &  -8, &
           &  -9, &
           &   4 /)  ! Stratospheric sulphate (hand edited from OPAC)
   rad_config%aerosol_optics_override_file_name = 'aerosol_optics_lmdz.nc'

!    IF (YRERAD%NAERMACC > 0) THEN
      ! With the MACC aerosol climatology we need to add in the
      ! background aerosol afterwards using the Tegen arrays.  In this
      ! case we first configure the background aerosol mass-extinction
      ! coefficient at 550 nm, which corresponds to the 10th RRTMG
      ! shortwave band.
!      TROP_BG_AER_MASS_EXT  = dry_aerosol_sw_mass_extinction(rad_config, &
!           &                                   ITYPE_TROP_BG_AER, 10)
!      STRAT_BG_AER_MASS_EXT = dry_aerosol_sw_mass_extinction(rad_config, &
!           &                                   ITYPE_STRAT_BG_AER, 10)
      
!      WRITE(NULOUT,'(a,i0)') 'Tropospheric bacground uses aerosol type ', &
!           &                 ITYPE_TROP_BG_AER
!      WRITE(NULOUT,'(a,i0)') 'Stratospheric bacground uses aerosol type ', &
!           &                 ITYPE_STRAT_BG_AER
!    ENDIF     
      
    IF (IVERBOSESETUP > 1) THEN
      WRITE(NULOUT,'(a)') '-------------------------------------------------------------------------------'
    ENDIF

    IF (LHOOK) CALL DR_HOOK('RADIATION_SETUP:SETUP_RADIATION_SCHEME',1,ZHOOK_HANDLE)

  END SUBROUTINE SETUP_RADIATION_SCHEME

END MODULE RADIATION_SETUP