Context Navigation

cva_driver.F90 @ 5028

Last change on this file since 5028 was 4368, checked in by lguez, 2 years ago
Sync latest trunk changes to Ocean_skin
Property svn:keywords set to `Id`
File size: 69.6 KB

Line
1
2	! $Id: cva_driver.F90 4368 2022-12-05 23:01:16Z asima $
3
4	SUBROUTINE cva_driver(len, nd, ndp1, ntra, nloc, k_upper, &
5	iflag_con, iflag_mix, iflag_ice_thermo, iflag_clos, ok_conserv_q, &
6	!! delt, t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
7	delt, comp_threshold, & ! jyg
8	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
9	u1, v1, tra1, &
10	p1, ph1, &
11	Ale1, Alp1, omega1, &
12	sig1feed1, sig2feed1, wght1, &
13	iflag1, ft1, fq1, fu1, fv1, ftra1, &
14	precip1, kbas1, ktop1, &
15	cbmf1, plcl1, plfc1, wbeff1, &
16	sig1, w01, & !input/output
17	ptop21, sigd1, &
18	ma1, mip1, Vprecip1, Vprecipi1, upwd1, dnwd1, dnwd01, & ! jyg
19	qcondc1, wd1, &
20	cape1, cin1, tvp1, &
21	ftd1, fqd1, &
22	Plim11, Plim21, asupmax1, supmax01, asupmaxmin1, &
23	lalim_conv1, &
24	!! da1,phi1,mp1,phi21,d1a1,dam1,sigij1,clw1, & ! RomP
25	!! elij1,evap1,ep1,epmlmMm1,eplaMm1, & ! RomP
26	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, wghti1, & ! RomP, RL
27	qta1, clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP, RL
28	wdtrainA1, wdtrainS1, wdtrainM1, qtc1, sigt1, tau_cld_cv, & !!jygprl
29	coefw_cld_cv, & ! RomP, AJ
30	epmax_diag1 & ! epmax_cape
31	#ifdef ISO
32	& ,xt1,xt1_wake,fxt1, xtprecip1 &
33	& ,xtVprecip1,xtVprecipi1 &
34	& ,xtclw1,fxtd1,xtevap1,xtwdtrainA1 &
35	#ifdef DIAGISO
36	& , water1,xtwater1,qp1,xtp1 &
37	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
38	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1,fxt_evapprecip1 &
39	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
40	#endif
41	#endif
42	& ) ! epmax_cape
43	! **************************************************************
44	! *
45	! CV_DRIVER *
46	! *
47	! *
48	! written by : Sandrine Bony-Lena , 17/05/2003, 11.19.41 *
49	! modified by : *
50	! **************************************************************
51	! **************************************************************
52
53	USE print_control_mod, ONLY: prt_level, lunout
54	USE add_phys_tend_mod, ONLY: fl_cor_ebil
55	#ifdef ISO
56	USE infotrac_phy, ONLY: ntraciso=>ntiso,niso,niso,itZonIso,nzone
57	USE isotopes_mod, ONLY: iso_eau,iso_HDO,iso_O18,ridicule,bidouille_anti_divergence
58	#ifdef ISOVERIF
59	use isotopes_verif_mod
60	!, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, &
61	!& iso_verif_egalite_choix,iso_verif_aberrant_choix,iso_verif_aberrant, &
62	!& iso_verif_egalite,iso_verif_noNaN,iso_verif_positif_nostop,iso_verif_noNaN_nostop
63	#endif
64	#ifdef ISOTRAC
65	use isotrac_mod, only: option_traceurs,izone_ddft,izone_revap, &
66	& izone_poubelle, index_zone,option_tmin,izone_cond
67	#ifdef ISOVERIF
68	USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, &
69	& iso_verif_trac_masse_vect
70	use isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille
71	#endif
72	#endif
73	#endif
74	IMPLICIT NONE
75
76	! .............................START PROLOGUE............................
77
78
79	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a "1" appended.
80	! The "1" is removed for the corresponding compressed variables.
81	! PARAMETERS:
82	! Name Type Usage Description
83	! ---------- ---------- ------- ----------------------------
84
85	! len Integer Input first (i) dimension
86	! nd Integer Input vertical (k) dimension
87	! ndp1 Integer Input nd + 1
88	! ntra Integer Input number of tracors
89	! nloc Integer Input dimension of arrays for compressed fields
90	! k_upper Integer Input upmost level for vertical loops
91	! iflag_con Integer Input version of convect (3/4)
92	! iflag_mix Integer Input version of mixing (0/1/2)
93	! iflag_ice_thermo Integer Input accounting for ice thermodynamics (0/1)
94	! iflag_clos Integer Input version of closure (0/1)
95	! tau_cld_cv Real Input characteristic time of dissipation of mixing fluxes
96	! coefw_cld_cv Real Input coefficient for updraft velocity in convection
97	! ok_conserv_q Logical Input when true corrections for water conservation are swtiched on
98	! delt Real Input time step
99	! comp_threshold Real Input threshold on the fraction of convective points below which
100	! fields are compressed
101	! t1 Real Input temperature (sat draught envt)
102	! q1 Real Input specific hum (sat draught envt)
103	! qs1 Real Input sat specific hum (sat draught envt)
104	! t1_wake Real Input temperature (unsat draught envt)
105	! q1_wake Real Input specific hum(unsat draught envt)
106	! qs1_wake Real Input sat specific hum(unsat draughts envt)
107	! s1_wake Real Input fractionnal area covered by wakes
108	! u1 Real Input u-wind
109	! v1 Real Input v-wind
110	! tra1 Real Input tracors
111	! p1 Real Input full level pressure
112	! ph1 Real Input half level pressure
113	! ALE1 Real Input Available lifting Energy
114	! ALP1 Real Input Available lifting Power
115	! sig1feed1 Real Input sigma coord at lower bound of feeding layer
116	! sig2feed1 Real Input sigma coord at upper bound of feeding layer
117	! wght1 Real Input weight density determining the feeding mixture
118	! iflag1 Integer Output flag for Emanuel conditions
119	! ft1 Real Output temp tend
120	! fq1 Real Output spec hum tend
121	! fu1 Real Output u-wind tend
122	! fv1 Real Output v-wind tend
123	! ftra1 Real Output tracor tend
124	! precip1 Real Output precipitation
125	! kbas1 Integer Output cloud base level
126	! ktop1 Integer Output cloud top level
127	! cbmf1 Real Output cloud base mass flux
128	! sig1 Real In/Out section adiabatic updraft
129	! w01 Real In/Out vertical velocity within adiab updraft
130	! ptop21 Real In/Out top of entraining zone
131	! Ma1 Real Output mass flux adiabatic updraft
132	! mip1 Real Output mass flux shed by the adiabatic updraft
133	! Vprecip1 Real Output vertical profile of total precipitation
134	! Vprecipi1 Real Output vertical profile of ice precipitation
135	! upwd1 Real Output total upward mass flux (adiab+mixed)
136	! dnwd1 Real Output saturated downward mass flux (mixed)
137	! dnwd01 Real Output unsaturated downward mass flux
138	! qcondc1 Real Output in-cld mixing ratio of condensed water
139	! wd1 Real Output downdraft velocity scale for sfc fluxes
140	! cape1 Real Output CAPE
141	! cin1 Real Output CIN
142	! tvp1 Real Output adiab lifted parcell virt temp
143	! ftd1 Real Output precip temp tend
144	! fqt1 Real Output precip spec hum tend
145	! Plim11 Real Output
146	! Plim21 Real Output
147	! asupmax1 Real Output
148	! supmax01 Real Output
149	! asupmaxmin1 Real Output
150
151	! ftd1 Real Output Array of temperature tendency due to precipitations (K/s) of dimension ND,
152	! defined at same grid levels as T, Q, QS and P.
153
154	! fqd1 Real Output Array of specific humidity tendencies due to precipitations ((gm/gm)/s)
155	! of dimension ND, defined at same grid levels as T, Q, QS and P.
156
157	! wdtrainA1 Real Output precipitation ejected from adiabatic draught;
158	! should be used in tracer transport (cvltr)
159	! wdtrainS1 Real Output precipitation detrained from shedding of adiabatic draught;
160	! used in tracer transport (cvltr)
161	! wdtrainM1 Real Output precipitation detrained from mixed draughts;
162	! used in tracer transport (cvltr)
163	! da1 Real Output used in tracer transport (cvltr)
164	! phi1 Real Output used in tracer transport (cvltr)
165	! mp1 Real Output used in tracer transport (cvltr)
166	! qtc1 Real Output specific humidity in convection
167	! sigt1 Real Output surface fraction in adiabatic updrafts
168	! phi21 Real Output used in tracer transport (cvltr)
169
170	! d1a1 Real Output used in tracer transport (cvltr)
171	! dam1 Real Output used in tracer transport (cvltr)
172
173	! epmlmMm1 Real Output used in tracer transport (cvltr)
174	! eplaMm1 Real Output used in tracer transport (cvltr)
175
176	! evap1 Real Output
177	! ep1 Real Output
178	! sigij1 Real Output used in tracer transport (cvltr)
179	! clw1 Real Output condensed water content of the adiabatic updraught
180	! elij1 Real Output
181	! wghti1 Real Output final weight of the feeding layers,
182	! used in tracer transport (cvltr)
183
184
185	! S. Bony, Mar 2002:
186	! * Several modules corresponding to different physical processes
187	! * Several versions of convect may be used:
188	! - iflag_con=3: version lmd (previously named convect3)
189	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
190	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
191	! S. Bony, Oct 2002:
192	! * Vectorization of convect3 (ie version lmd)
193
194	! ..............................END PROLOGUE.............................
195
196
197
198	! Input
199	INTEGER, INTENT (IN) :: len
200	INTEGER, INTENT (IN) :: nd
201	INTEGER, INTENT (IN) :: ndp1
202	INTEGER, INTENT (IN) :: ntra
203	INTEGER, INTENT(IN) :: nloc ! (nloc=len) pour l'instant
204	INTEGER, INTENT (IN) :: k_upper
205	INTEGER, INTENT (IN) :: iflag_con
206	INTEGER, INTENT (IN) :: iflag_mix
207	INTEGER, INTENT (IN) :: iflag_ice_thermo
208	INTEGER, INTENT (IN) :: iflag_clos
209	LOGICAL, INTENT (IN) :: ok_conserv_q
210	REAL, INTENT (IN) :: tau_cld_cv
211	REAL, INTENT (IN) :: coefw_cld_cv
212	REAL, INTENT (IN) :: delt
213	REAL, INTENT (IN) :: comp_threshold
214	REAL, DIMENSION (len, nd), INTENT (IN) :: t1
215	REAL, DIMENSION (len, nd), INTENT (IN) :: q1
216	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1
217	REAL, DIMENSION (len, nd), INTENT (IN) :: t1_wake
218	REAL, DIMENSION (len, nd), INTENT (IN) :: q1_wake
219	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1_wake
220	REAL, DIMENSION (len), INTENT (IN) :: s1_wake
221	REAL, DIMENSION (len, nd), INTENT (IN) :: u1
222	REAL, DIMENSION (len, nd), INTENT (IN) :: v1
223	REAL, DIMENSION (len, nd, ntra), INTENT (IN) :: tra1
224	REAL, DIMENSION (len, nd), INTENT (IN) :: p1
225	REAL, DIMENSION (len, ndp1), INTENT (IN) :: ph1
226	REAL, DIMENSION (len), INTENT (IN) :: Ale1
227	REAL, DIMENSION (len), INTENT (IN) :: Alp1
228	REAL, DIMENSION (len, nd), INTENT (IN) :: omega1
229	REAL, INTENT (IN) :: sig1feed1 ! pressure at lower bound of feeding layer
230	REAL, INTENT (IN) :: sig2feed1 ! pressure at upper bound of feeding layer
231	REAL, DIMENSION (nd), INTENT (IN) :: wght1 ! weight density determining the feeding mixture
232	INTEGER, DIMENSION (len), INTENT (IN) :: lalim_conv1
233
234	! Input/Output
235	REAL, DIMENSION (len, nd), INTENT (INOUT) :: sig1
236	REAL, DIMENSION (len, nd), INTENT (INOUT) :: w01
237
238	! Output
239	INTEGER, DIMENSION (len), INTENT (OUT) :: iflag1
240	REAL, DIMENSION (len, nd), INTENT (OUT) :: ft1
241	REAL, DIMENSION (len, nd), INTENT (OUT) :: fq1
242	REAL, DIMENSION (len, nd), INTENT (OUT) :: fu1
243	REAL, DIMENSION (len, nd), INTENT (OUT) :: fv1
244	REAL, DIMENSION (len, nd, ntra), INTENT (OUT) :: ftra1
245	REAL, DIMENSION (len), INTENT (OUT) :: precip1
246	INTEGER, DIMENSION (len), INTENT (OUT) :: kbas1
247	INTEGER, DIMENSION (len), INTENT (OUT) :: ktop1
248	REAL, DIMENSION (len), INTENT (OUT) :: cbmf1
249	REAL, DIMENSION (len), INTENT (OUT) :: plcl1
250	REAL, DIMENSION (len), INTENT (OUT) :: plfc1
251	REAL, DIMENSION (len), INTENT (OUT) :: wbeff1
252	REAL, DIMENSION (len), INTENT (OUT) :: ptop21
253	REAL, DIMENSION (len), INTENT (OUT) :: sigd1
254	REAL, DIMENSION (len, nd), INTENT (OUT) :: ma1 ! adiab. asc. mass flux (staggered grid)
255	REAL, DIMENSION (len, nd), INTENT (OUT) :: mip1 ! mass flux shed from adiab. ascent (extensive)
256	! real Vprecip1(len,nd)
257	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecip1 ! tot precipitation flux (staggered grid)
258	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecipi1 ! ice precipitation flux (staggered grid)
259	REAL, DIMENSION (len, nd), INTENT (OUT) :: upwd1 ! upwd sat. mass flux (staggered grid)
260	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd1 ! dnwd sat. mass flux (staggered grid)
261	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd01 ! unsat. mass flux (staggered grid)
262	REAL, DIMENSION (len, nd), INTENT (OUT) :: qcondc1 ! max cloud condensate (intensive) ! cld
263	REAL, DIMENSION (len), INTENT (OUT) :: wd1 ! gust
264	REAL, DIMENSION (len), INTENT (OUT) :: cape1
265	REAL, DIMENSION (len), INTENT (OUT) :: cin1
266	REAL, DIMENSION (len, nd), INTENT (OUT) :: tvp1 ! Virt. temp. in the adiab. ascent
267
268	!AC!
269	!! real da1(len,nd),phi1(len,nd,nd)
270	!! real da(len,nd),phi(len,nd,nd)
271	!AC!
272	REAL, DIMENSION (len, nd), INTENT (OUT) :: ftd1 ! Temp. tendency due to the sole unsat. drafts
273	REAL, DIMENSION (len, nd), INTENT (OUT) :: fqd1 ! Moist. tendency due to the sole unsat. drafts
274	REAL, DIMENSION (len), INTENT (OUT) :: Plim11
275	REAL, DIMENSION (len), INTENT (OUT) :: Plim21
276	REAL, DIMENSION (len, nd), INTENT (OUT) :: asupmax1 ! Highest mixing fraction of mixed updraughts
277	REAL, DIMENSION (len), INTENT (OUT) :: supmax01
278	REAL, DIMENSION (len), INTENT (OUT) :: asupmaxmin1
279	REAL, DIMENSION (len, nd), INTENT (OUT) :: qtc1 ! in cloud water content (intensive) ! cld
280	REAL, DIMENSION (len, nd), INTENT (OUT) :: sigt1 ! fract. cloud area (intensive) ! cld
281
282	! RomP >>>
283	REAL, DIMENSION (len, nd), INTENT (OUT) :: wdtrainA1, wdtrainS1, wdtrainM1 ! precipitation sources (extensive)
284	REAL, DIMENSION (len, nd), INTENT (OUT) :: mp1 ! unsat. mass flux (staggered grid)
285	REAL, DIMENSION (len, nd), INTENT (OUT) :: da1 ! detrained mass flux of adiab. asc. air (extensive)
286	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi1 ! mass flux of envt. air in mixed draughts (extensive)
287	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: epmlmMm1 ! (extensive)
288	REAL, DIMENSION (len, nd), INTENT (OUT) :: eplaMm1 ! (extensive)
289	REAL, DIMENSION (len, nd), INTENT (OUT) :: evap1 ! evaporation rate in precip. downdraft. (intensive)
290	REAL, DIMENSION (len, nd), INTENT (OUT) :: ep1
291	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: sigij1 ! mass fraction of env. air in mixed draughts (intensive)
292	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: elij1! cond. water per unit mass of mixed draughts (intensive)
293	REAL, DIMENSION (len, nd), INTENT (OUT) :: qta1 ! total water per unit mass of the adiab. asc. (intensive)
294	REAL, DIMENSION (len, nd), INTENT (OUT) :: clw1 ! cond. water per unit mass of the adiab. asc. (intensive)
295	!JYG,RL
296	REAL, DIMENSION (len, nd), INTENT (OUT) :: wghti1 ! final weight of the feeding layers (extensive)
297	!JYG,RL
298	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi21 ! (extensive)
299	REAL, DIMENSION (len, nd), INTENT (OUT) :: d1a1 ! (extensive)
300	REAL, DIMENSION (len, nd), INTENT (OUT) :: dam1 ! (extensive)
301	! RomP <<<
302	REAL, DIMENSION (len ), INTENT (OUT) :: epmax_diag1
303	#ifdef ISO
304	real, DIMENSION(ntraciso,len,nd), INTENT (IN) :: xt1
305	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt1
306	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xt1_wake
307	real, DIMENSION(ntraciso,len), INTENT (OUT) :: xtprecip1
308	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxtd1
309	real, DIMENSION(ntraciso,len,ndp1), INTENT (OUT) :: xtvprecip1
310	real, DIMENSION(ntraciso,len,ndp1), INTENT (OUT) :: xtvprecipi1
311	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xtwdtrainA1
312	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xtevap1
313	REAL, DIMENSION (ntraciso,len, nd), INTENT (OUT) :: xtclw1
314	REAL, DIMENSION (ntraciso,len, nd, nd) :: xtelij1 ! pas besoin de le sortir?
315	#ifdef DIAGISO
316	real, DIMENSION(len,nd), INTENT (OUT) :: water1
317	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xtwater1
318	real, DIMENSION(len,nd), INTENT (OUT) :: qp1
319	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xtp1
320	real, DIMENSION(len,nd), INTENT (OUT) :: fq_detrainement1
321	real, DIMENSION(len,nd), INTENT (OUT) :: fq_ddft1
322	real, DIMENSION(len,nd), INTENT (OUT) :: fq_fluxmasse1
323	real, DIMENSION(len,nd), INTENT (OUT) :: fq_evapprecip1
324	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt_detrainement1
325	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt_ddft1
326	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt_fluxmasse1
327	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt_evapprecip1
328	real, DIMENSION(len,nd), INTENT (OUT) :: f_detrainement1
329	real, DIMENSION(len,nd), INTENT (OUT) :: q_detrainement1
330	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xt_detrainement1
331	! real mentbas1(len,nd)
332	! real qentbas1(len,nd), xtentbas1(niso,len,nd)
333	#endif
334	#endif
335
336
337	! -------------------------------------------------------------------
338	! Prolog by Kerry Emanuel.
339	! -------------------------------------------------------------------
340	! --- ARGUMENTS
341	! -------------------------------------------------------------------
342	! --- On input:
343
344	! t: Array of absolute temperature (K) of dimension ND, with first
345	! index corresponding to lowest model level. Note that this array
346	! will be altered by the subroutine if dry convective adjustment
347	! occurs and if IPBL is not equal to 0.
348
349	! q: Array of specific humidity (gm/gm) of dimension ND, with first
350	! index corresponding to lowest model level. Must be defined
351	! at same grid levels as T. Note that this array will be altered
352	! if dry convective adjustment occurs and if IPBL is not equal to 0.
353
354	! qs: Array of saturation specific humidity of dimension ND, with first
355	! index corresponding to lowest model level. Must be defined
356	! at same grid levels as T. Note that this array will be altered
357	! if dry convective adjustment occurs and if IPBL is not equal to 0.
358
359	! t_wake: Array of absolute temperature (K), seen by unsaturated draughts,
360	! of dimension ND, with first index corresponding to lowest model level.
361
362	! q_wake: Array of specific humidity (gm/gm), seen by unsaturated draughts,
363	! of dimension ND, with first index corresponding to lowest model level.
364	! Must be defined at same grid levels as T.
365
366	! qs_wake: Array of saturation specific humidity, seen by unsaturated draughts,
367	! of dimension ND, with first index corresponding to lowest model level.
368	! Must be defined at same grid levels as T.
369
370	! s_wake: Array of fractionnal area occupied by the wakes.
371
372	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
373	! index corresponding with the lowest model level. Defined at
374	! same levels as T. Note that this array will be altered if
375	! dry convective adjustment occurs and if IPBL is not equal to 0.
376
377	! v: Same as u but for meridional velocity.
378
379	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
380	! where NTRA is the number of different tracers. If no
381	! convective tracer transport is needed, define a dummy
382	! input array of dimension (ND,1). Tracers are defined at
383	! same vertical levels as T. Note that this array will be altered
384	! if dry convective adjustment occurs and if IPBL is not equal to 0.
385
386	! p: Array of pressure (mb) of dimension ND, with first
387	! index corresponding to lowest model level. Must be defined
388	! at same grid levels as T.
389
390	! ph: Array of pressure (mb) of dimension ND+1, with first index
391	! corresponding to lowest level. These pressures are defined at
392	! levels intermediate between those of P, T, Q and QS. The first
393	! value of PH should be greater than (i.e. at a lower level than)
394	! the first value of the array P.
395
396	! ALE: Available lifting Energy
397
398	! ALP: Available lifting Power
399
400	! nl: The maximum number of levels to which convection can penetrate, plus 1.
401	! NL MUST be less than or equal to ND-1.
402
403	! delt: The model time step (sec) between calls to CONVECT
404
405	! ----------------------------------------------------------------------------
406	! --- On Output:
407
408	! iflag: An output integer whose value denotes the following:
409	! VALUE INTERPRETATION
410	! ----- --------------
411	! 0 Moist convection occurs.
412	! 1 Moist convection occurs, but a CFL condition
413	! on the subsidence warming is violated. This
414	! does not cause the scheme to terminate.
415	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
416	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
417	! 4 No moist convection; atmosphere is not
418	! unstable
419	! 6 No moist convection because ihmin le minorig.
420	! 7 No moist convection because unreasonable
421	! parcel level temperature or specific humidity.
422	! 8 No moist convection: lifted condensation
423	! level is above the 200 mb level.
424	! 9 No moist convection: cloud base is higher
425	! then the level NL-1.
426	! 10 No moist convection: cloud top is too warm.
427	! 14 No moist convection; atmosphere is very
428	! stable (=> no computation)
429	!
430
431	! ft: Array of temperature tendency (K/s) of dimension ND, defined at same
432	! grid levels as T, Q, QS and P.
433
434	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
435	! defined at same grid levels as T, Q, QS and P.
436
437	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
438	! defined at same grid levels as T.
439
440	! fv: Same as FU, but for forcing of meridional velocity.
441
442	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
443	! second, defined at same levels as T. Dimensioned (ND,NTRA).
444
445	! precip: Scalar convective precipitation rate (mm/day).
446
447	! wd: A convective downdraft velocity scale. For use in surface
448	! flux parameterizations. See convect.ps file for details.
449
450	! tprime: A convective downdraft temperature perturbation scale (K).
451	! For use in surface flux parameterizations. See convect.ps
452	! file for details.
453
454	! qprime: A convective downdraft specific humidity
455	! perturbation scale (gm/gm).
456	! For use in surface flux parameterizations. See convect.ps
457	! file for details.
458
459	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
460	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
461	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
462	! by the calling program between calls to CONVECT.
463
464	! det: Array of detrainment mass flux of dimension ND.
465	! -------------------------------------------------------------------
466
467	! Local (non compressed) arrays
468
469
470	INTEGER i, k, il
471	INTEGER nword1, nword2, nword3, nword4
472	INTEGER icbmax
473	INTEGER nk1(len)
474	INTEGER icb1(len)
475	INTEGER icbs1(len)
476
477	LOGICAL ok_inhib ! True => possible inhibition of convection by dryness
478	LOGICAL, SAVE :: debut = .TRUE.
479	!$OMP THREADPRIVATE(debut)
480
481	REAL coef_convective(len) ! = 1 for convective points, = 0 otherwise
482	REAL tnk1(len)
483	REAL thnk1(len)
484	REAL qnk1(len)
485	REAL gznk1(len)
486	REAL qsnk1(len)
487	REAL unk1(len)
488	REAL vnk1(len)
489	REAL cpnk1(len)
490	REAL hnk1(len)
491	REAL pbase1(len)
492	REAL buoybase1(len)
493
494	REAL lf1(len, nd), lf1_wake(len, nd)
495	REAL lv1(len, nd), lv1_wake(len, nd)
496	REAL cpn1(len, nd), cpn1_wake(len, nd)
497	REAL tv1(len, nd), tv1_wake(len, nd)
498	REAL gz1(len, nd), gz1_wake(len, nd)
499	REAL hm1(len, nd)
500	REAL h1(len, nd), h1_wake(len, nd)
501	REAL tp1(len, nd)
502	REAL th1(len, nd), th1_wake(len, nd)
503
504	REAL bid(len, nd) ! dummy array
505
506	#ifdef ISO
507	integer ixt
508	real xtnk1(ntraciso,len)
509	#endif
510
511
512	INTEGER ncum
513
514	REAL p1feed1(len) ! pressure at lower bound of feeding layer
515	REAL p2feed1(len) ! pressure at upper bound of feeding layer
516	!JYG,RL
517	!! real wghti1(len,nd) ! weights of the feeding layers
518	!JYG,RL
519
520	! (local) compressed fields:
521
522
523	INTEGER idcum(nloc)
524	!jyg<
525	LOGICAL compress ! True if compression occurs
526	!>jyg
527	INTEGER iflag(nloc), nk(nloc), icb(nloc)
528	INTEGER nent(nloc, nd)
529	INTEGER icbs(nloc)
530	INTEGER inb(nloc), inbis(nloc)
531
532	REAL cbmf(nloc), plcl(nloc), plfc(nloc), wbeff(nloc)
533	REAL t(nloc, nd), q(nloc, nd), qs(nloc, nd)
534	REAL t_wake(nloc, nd), q_wake(nloc, nd), qs_wake(nloc, nd)
535	REAL s_wake(nloc)
536	REAL u(nloc, nd), v(nloc, nd)
537	REAL gz(nloc, nd), h(nloc, nd)
538	REAL h_wake(nloc, nd)
539	REAL lv(nloc, nd), lf(nloc, nd), cpn(nloc, nd)
540	REAL lv_wake(nloc, nd), lf_wake(nloc, nd), cpn_wake(nloc, nd)
541	REAL p(nloc, nd), ph(nloc, nd+1), tv(nloc, nd), tp(nloc, nd)
542	REAL tv_wake(nloc, nd)
543	REAL clw(nloc, nd)
544	REAL, DIMENSION(nloc, nd) :: qta, qpreca !!jygprl
545	REAL dph(nloc, nd)
546	REAL pbase(nloc), buoybase(nloc), th(nloc, nd)
547	REAL th_wake(nloc, nd)
548	REAL tvp(nloc, nd)
549	REAL sig(nloc, nd), w0(nloc, nd), ptop2(nloc)
550	REAL hp(nloc, nd), ep(nloc, nd), sigp(nloc, nd)
551	REAL buoy(nloc, nd)
552	REAL cape(nloc)
553	REAL cin(nloc)
554	REAL m(nloc, nd)
555	REAL mm(nloc, nd)
556	REAL ment(nloc, nd, nd), sigij(nloc, nd, nd)
557	REAL qent(nloc, nd, nd)
558	REAL hent(nloc, nd, nd)
559	REAL uent(nloc, nd, nd), vent(nloc, nd, nd)
560	REAL ments(nloc, nd, nd), qents(nloc, nd, nd)
561	REAL elij(nloc, nd, nd)
562	REAL supmax(nloc, nd)
563	REAL Ale(nloc), Alp(nloc), coef_clos(nloc)
564	REAL omega(nloc,nd)
565	REAL sigd(nloc)
566	! real mp(nloc,nd), qp(nloc,nd), up(nloc,nd), vp(nloc,nd)
567	! real wt(nloc,nd), water(nloc,nd), evap(nloc,nd), ice(nloc,nd)
568	! real b(nloc,nd), sigd(nloc)
569	! save mp,qp,up,vp,wt,water,evap,b
570	REAL, DIMENSION(len,nd) :: mp, qp, up, vp
571	REAL, DIMENSION(len,nd) :: wt, water, evap
572	REAL, DIMENSION(len,nd) :: ice, fondue, b
573	REAL, DIMENSION(len,nd) :: frac_a, frac_s, faci !!jygprl
574	REAL ft(nloc, nd), fq(nloc, nd)
575	REAL ftd(nloc, nd), fqd(nloc, nd)
576	REAL fu(nloc, nd), fv(nloc, nd)
577	REAL upwd(nloc, nd), dnwd(nloc, nd), dnwd0(nloc, nd)
578	REAL ma(nloc, nd), mip(nloc, nd)
579	!! REAL tls(nloc, nd), tps(nloc, nd) ! unused . jyg
580	REAL qprime(nloc), tprime(nloc)
581	REAL precip(nloc)
582	! real Vprecip(nloc,nd)
583	REAL vprecip(nloc, nd+1)
584	REAL vprecipi(nloc, nd+1)
585	REAL tra(nloc, nd, ntra), trap(nloc, nd, ntra)
586	REAL ftra(nloc, nd, ntra), traent(nloc, nd, nd, ntra)
587	REAL qcondc(nloc, nd) ! cld
588	REAL wd(nloc) ! gust
589	REAL Plim1(nloc), plim2(nloc)
590	REAL asupmax(nloc, nd)
591	REAL supmax0(nloc)
592	REAL asupmaxmin(nloc)
593
594	REAL tnk(nloc), qnk(nloc), gznk(nloc)
595	REAL wghti(nloc, nd)
596	REAL hnk(nloc), unk(nloc), vnk(nloc)
597
598	REAL qtc(nloc, nd) ! cld
599	REAL sigt(nloc, nd) ! cld
600
601	! RomP >>>
602	REAL wdtrainA(nloc, nd), wdtrainS(nloc, nd), wdtrainM(nloc, nd) !!jygprl
603	REAL da(len, nd), phi(len, nd, nd)
604	REAL epmlmMm(nloc, nd, nd), eplaMm(nloc, nd)
605	REAL phi2(len, nd, nd)
606	REAL d1a(len, nd), dam(len, nd)
607	! RomP <<<
608	REAL epmax_diag(nloc) ! epmax_cape
609
610	CHARACTER (LEN=20) :: modname = 'cva_driver'
611	CHARACTER (LEN=80) :: abort_message
612
613	REAL, PARAMETER :: Cin_noconv = -100000.
614	REAL, PARAMETER :: Cape_noconv = -1.
615
616	INTEGER,SAVE :: igout=1
617	!$OMP THREADPRIVATE(igout)
618
619	#ifdef ISO
620	real xt(ntraciso,nloc,nd)
621	REAL, DIMENSION(ntraciso,nloc, nd) :: xtta
622	real xt_wake(ntraciso,nloc,nd)
623	real xtclw(ntraciso,nloc,nd)
624	real xtp(ntraciso,nloc,nd)
625	real xtent(ntraciso,nloc,nd,nd)
626	real xtelij(ntraciso,nloc,nd,nd)
627	real xtwater(ntraciso,nloc,nd)
628	real xtice(ntraciso,nloc,nd)
629	real xtevap(ntraciso,nloc,nd)
630	real fxt(ntraciso,nloc,nd)
631	real fxtd(ntraciso,nloc,nd)
632	real xtprecip(ntraciso,nloc)
633	real xtnk(ntraciso,nloc)
634	real xtVprecip(ntraciso,nloc,nd+1)
635	real xtVprecipi(ntraciso,nloc,nd+1)
636	real xtwdtrainA(niso,nloc,nd)
637	#ifdef DIAGISO
638	real fxt_detrainement(niso,nloc,nd)
639	real fxt_fluxmasse(niso,nloc,nd)
640	real fxt_evapprecip(niso,nloc,nd)
641	real fxt_ddft(niso,nloc,nd)
642	real fq_detrainement(nloc,nd)
643	real fq_fluxmasse(nloc,nd)
644	real fq_evapprecip(nloc,nd)
645	real fq_ddft(nloc,nd)
646	real f_detrainement(nloc,nd)
647	real q_detrainement(nloc,nd)
648	real xt_detrainement(niso,nloc,nd)
649	#endif
650	#ifdef ISOTRAC
651	integer iiso,ixt_ddft,ixt_poubelle,ixt_revap
652	integer izone
653	#endif
654	#ifdef ISOVERIF
655	integer j
656	#endif
657	#endif
658
659
660	! print *, 't1, t1_wake ',(k,t1(1,k),t1_wake(1,k),k=1,nd)
661	! print *, 'q1, q1_wake ',(k,q1(1,k),q1_wake(1,k),k=1,nd)
662
663	! -------------------------------------------------------------------
664	! --- SET CONSTANTS AND PARAMETERS
665	! -------------------------------------------------------------------
666
667	! -- set simulation flags:
668	! (common cvflag)
669
670	CALL cv_flag(iflag_ice_thermo)
671
672	! -- set thermodynamical constants:
673	! (common cvthermo)
674
675	CALL cv_thermo(iflag_con)
676
677	! -- set convect parameters
678
679	! includes microphysical parameters and parameters that
680	! control the rate of approach to quasi-equilibrium)
681	! (common cvparam)
682
683	IF (iflag_con==3) THEN
684	CALL cv3_param(nd, k_upper, delt)
685
686	END IF
687
688	IF (iflag_con==4) THEN
689	CALL cv_param(nd)
690	#ifdef ISO
691	CALL abort_physic('cva_driver 555', 'isos pas prevus ici', 1)
692	#endif
693	END IF
694
695	! ---------------------------------------------------------------------
696	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
697	! ---------------------------------------------------------------------
698	nword1 = len
699	nword2 = len*nd
700	nword3 = lenndntra
701	nword4 = lenndnd
702
703	iflag1(:) = 0
704	ktop1(:) = 0
705	kbas1(:) = 0
706	ft1(:, :) = 0.0
707	fq1(:, :) = 0.0
708	fu1(:, :) = 0.0
709	fv1(:, :) = 0.0
710	ftra1(:, :, :) = 0.
711	precip1(:) = 0.
712	cbmf1(:) = 0.
713	plcl1(:) = 0.
714	plfc1(:) = 0.
715	wbeff1(:) = 0.
716	ptop21(:) = 0.
717	sigd1(:) = 0.
718	ma1(:, :) = 0.
719	mip1(:, :) = 0.
720	vprecip1(:, :) = 0.
721	vprecipi1(:, :) = 0.
722	upwd1(:, :) = 0.
723	dnwd1(:, :) = 0.
724	dnwd01(:, :) = 0.
725	qcondc1(:, :) = 0.
726	wd1(:) = 0.
727	cape1(:) = 0.
728	cin1(:) = 0.
729	tvp1(:, :) = 0.
730	ftd1(:, :) = 0.
731	fqd1(:, :) = 0.
732	Plim11(:) = 0.
733	Plim21(:) = 0.
734	asupmax1(:, :) = 0.
735	supmax01(:) = 0.
736	asupmaxmin1(:) = 0.
737	#ifdef ISO
738	xtprecip1(:, :) = 0.
739	fxt1(:,:, :) = 0.0
740	xtvprecip1(:,:, :) = 0.
741	xtvprecipi1(:,:, :) = 0.
742	fxtd1(:,:, :) = 0.
743	#endif
744
745	tvp(:, :) = 0. !ym missing init, need to have a look by developpers
746	tv(:, :) = 0. !ym missing init, need to have a look by developpers
747
748	DO il = 1, len
749	!! cin1(il) = -100000.
750	!! cape1(il) = -1.
751	cin1(il) = Cin_noconv
752	cape1(il) = Cape_noconv
753	END DO
754
755	!! IF (iflag_con==3) THEN
756	!! DO il = 1, len
757	!! sig1(il, nd) = sig1(il, nd) + 1.
758	!! sig1(il, nd) = amin1(sig1(il,nd), 12.1)
759	!! END DO
760	!! END IF
761
762	IF (iflag_con==3) THEN
763	CALL cv3_incrcount(len,nd,delt,sig1)
764	END IF ! (iflag_con==3)
765
766	! RomP >>>
767	sigt1(:, :) = 0.
768	qtc1(:, :) = 0.
769	wdtrainA1(:, :) = 0.
770	wdtrainS1(:, :) = 0.
771	wdtrainM1(:, :) = 0.
772	da1(:, :) = 0.
773	phi1(:, :, :) = 0.
774	epmlmMm1(:, :, :) = 0.
775	eplaMm1(:, :) = 0.
776	mp1(:, :) = 0.
777	evap1(:, :) = 0.
778	ep1(:, :) = 0.
779	sigij1(:, :, :) = 0.
780	elij1(:, :, :) = 0.
781	qta1(:,:) = 0.
782	clw1(:,:) = 0.
783	wghti1(:,:) = 0.
784	phi21(:, :, :) = 0.
785	d1a1(:, :) = 0.
786	dam1(:, :) = 0.
787	m(:,:)=0. ! C Risi
788	#ifdef ISO
789	xtwdtrainA1(:,:, :) = 0.
790	xtevap1(:,:, :) = 0.
791	xtelij1(:,:, :, :) = 0.
792	xtclw1(:,:,:) = 0.
793	q(:,:)=0.0 ! securite pour check plus bas
794	xt(:,:,:)=0.0 ! securite pour check plus bas
795	q_wake(:,:)=0.0 ! securite pour check plus bas
796	xt_wake(:,:,:)=0.0 ! securite pour check plus bas
797	clw(:,:)=0.0 ! securite pour check plus bas
798	xtclw(:,:,:)=0.0 ! securite pour check plus bas
799	#endif
800	! RomP <<<
801	! ---------------------------------------------------------------------
802	! --- INITIALIZE LOCAL ARRAYS AND PARAMETERS
803	! ---------------------------------------------------------------------
804
805	DO il = 1, nloc
806	coef_clos(il) = 1.
807	END DO
808
809	! --------------------------------------------------------------------
810	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
811	! --------------------------------------------------------------------
812
813	IF (iflag_con==3) THEN
814
815	IF (debut) THEN
816	PRINT *, 'Emanuel version 3 nouvelle'
817	END IF
818	! print*,'t1, q1 ',t1,q1
819	if (prt_level >= 9) &
820	PRINT *, 'cva_driver -> cv3_prelim'
821	CALL cv3_prelim(len, nd, ndp1, t1, q1, p1, ph1, & ! nd->na
822	lv1, lf1, cpn1, tv1, gz1, h1, hm1, th1)
823
824
825	if (prt_level >= 9) &
826	PRINT *, 'cva_driver -> cv3_prelim'
827	CALL cv3_prelim(len, nd, ndp1, t1_wake, q1_wake, p1, ph1, & ! nd->na
828	lv1_wake, lf1_wake, cpn1_wake, tv1_wake, gz1_wake, &
829	h1_wake, bid, th1_wake)
830
831	END IF
832
833	IF (iflag_con==4) THEN
834	PRINT *, 'Emanuel version 4 '
835	if (prt_level >= 9) &
836	PRINT *, 'cva_driver -> cv_prelim'
837	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, &
838	lv1, cpn1, tv1, gz1, h1, hm1)
839	END IF
840
841	! --------------------------------------------------------------------
842	! --- CONVECTIVE FEED
843	! --------------------------------------------------------------------
844
845	! compute feeding layer potential temperature and mixing ratio :
846
847	! get bounds of feeding layer
848
849	! test niveaux couche alimentation KE
850	IF (sig1feed1==sig2feed1) THEN
851	WRITE (lunout, *) 'impossible de choisir sig1feed=sig2feed'
852	WRITE (lunout, *) 'changer la valeur de sig2feed dans physiq.def'
853	abort_message = ''
854	CALL abort_physic(modname, abort_message, 1)
855	END IF
856
857	DO i = 1, len
858	p1feed1(i) = sig1feed1*ph1(i, 1)
859	p2feed1(i) = sig2feed1*ph1(i, 1)
860	!test maf
861	! p1feed1(i)=ph1(i,1)
862	! p2feed1(i)=ph1(i,2)
863	! p2feed1(i)=ph1(i,3)
864	!testCR: on prend la couche alim des thermiques
865	! p2feed1(i)=ph1(i,lalim_conv1(i)+1)
866	! print*,'lentr=',lentr(i),ph1(i,lentr(i)+1),ph1(i,2)
867	END DO
868
869	IF (iflag_con==3) THEN
870	END IF
871	DO i = 1, len
872	! print*,'avant cv3_feed Plim',p1feed1(i),p2feed1(i)
873	END DO
874	IF (iflag_con==3) THEN
875
876	! print*, 'IFLAG1 avant cv3_feed'
877	! print*,'len,nd',len,nd
878	! write(*,'(64i1)') iflag1(2:len-1)
879
880	if (prt_level >= 9) &
881	PRINT *, 'cva_driver -> cv3_feed'
882	CALL cv3_feed(len, nd, ok_conserv_q, & ! nd->na
883	t1, q1, u1, v1, p1, ph1, h1, gz1, &
884	p1feed1, p2feed1, wght1, &
885	wghti1, tnk1, thnk1, qnk1, qsnk1, unk1, vnk1, &
886	cpnk1, hnk1, nk1, icb1, icbmax, iflag1, gznk1, plcl1 &
887	#ifdef ISO
888	& ,xt1,xtnk1 &
889	#endif
890	& )
891	END IF
892
893	! print*, 'IFLAG1 apres cv3_feed'
894	! print*,'len,nd',len,nd
895	! write(*,'(64i1)') iflag1(2:len-1)
896
897	IF (iflag_con==4) THEN
898	if (prt_level >= 9) &
899	PRINT *, 'cva_driver -> cv_feed'
900	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, &
901	nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1)
902	END IF
903
904	! print *, 'cv3_feed-> iflag1, plcl1 ',iflag1(1),plcl1(1)
905
906	! --------------------------------------------------------------------
907	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
908	! (up through ICB for convect4, up through ICB+1 for convect3)
909	! Calculates the lifted parcel virtual temperature at nk, the
910	! actual temperature, and the adiabatic liquid water content.
911	! --------------------------------------------------------------------
912
913	IF (iflag_con==3) THEN
914
915	if (prt_level >= 9) &
916	PRINT *, 'cva_driver -> cv3_undilute1'
917
918	#ifdef ISO
919	#ifdef ISOVERIF
920	write(,) 'cva_driver 593: avant cv3_undilute1'
921	if (iso_HDO.gt.0) then
922	do k=1,nd
923	do i=1,len
924	if (q1(i,k).gt.ridicule) then
925	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
926	& 'cva_driver 502')
927	endif ! if (q1(i,k).gt.ridicule) then
928	enddo !do i=1,len
929	enddo !do k=1,nd
930	endif !if (iso_HDO.gt.0) then
931	if (iso_eau.gt.0) then
932	do i=1,len
933	do k=1,nd
934	call iso_verif_egalite(xt1(iso_eau,i,k),q1(i,k), &
935	& 'cva_driver 764')
936	call iso_verif_egalite(xt1_wake(iso_eau,i,k),q1_wake(i,k), &
937	& 'cva_driver 766')
938	enddo !do k=1,nd
939	call iso_verif_egalite(xtnk1(iso_eau,i),qnk1(i), &
940	& 'cva_driver 777')
941	do ixt=1,ntraciso
942	call iso_verif_noNaN(xtnk1(ixt,i),'cva_driver 784')
943	enddo ! do ixt=1,ntraciso
944	enddo !do i=1,len
945	endif !if (iso_eau.gt.0) then
946	#ifdef ISOTRAC
947	do k=1,nd
948	do i=1,len
949	call iso_verif_traceur(xt1(1,i,k),'cva_driver 601')
950	enddo !do i=1,len
951	enddo !do k=1,nd
952	#endif
953	#endif
954	#endif
955
956	CALL cv3_undilute1(len, nd, t1, qs1, gz1, plcl1, p1, icb1, tnk1, qnk1, & ! nd->na
957	gznk1, tp1, tvp1, clw1, icbs1 &
958	#ifdef ISO
959	& ,xtnk1,xtclw1 &
960	#endif
961	& )
962
963	#ifdef ISO
964	#ifdef ISOVERIF
965	write(,) 'cva_driver 621: apres cv3_undilute1'
966	do k=1,nd
967	do i = 1, len
968	if (iso_eau.gt.0) then
969	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
970	& 'cva_driver 798',errmax,errmaxrel)
971	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
972	& 'cva_driver 800',errmax,errmaxrel)
973	endif !if (iso_eau.gt.0) then
974	do ixt=1,ntraciso
975	call iso_verif_noNaN(xt1(ixt,i,k),'cva_driver 815')
976	enddo ! do ixt=1,ntraciso
977	#ifdef ISOTRAC
978	call iso_verif_traceur(xt1(1,i,k),'cva_driver 623')
979	#endif
980	enddo !do i = 1, len
981	enddo !do k=1,nd
982	do i = 1, len
983	do ixt=1,ntraciso
984	call iso_verif_noNaN(xtnk1(ixt,i),'cva_driver 824')
985	enddo ! do ixt=1,ntraciso
986	enddo !do i = 1, len
987	#endif
988	!write(,) 'SORTIE DE CV3_UNDILUTE1'
989	#endif
990
991	END IF
992
993
994	IF (iflag_con==4) THEN
995	if (prt_level >= 9) &
996	PRINT *, 'cva_driver -> cv_undilute1'
997	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, &
998	tp1, tvp1, clw1)
999	END IF
1000
1001	! -------------------------------------------------------------------
1002	! --- TRIGGERING
1003	! -------------------------------------------------------------------
1004
1005	! print *,' avant triggering, iflag_con ',iflag_con
1006
1007	IF (iflag_con==3) THEN
1008
1009	if (prt_level >= 9) &
1010	PRINT *, 'cva_driver -> cv3_trigger'
1011	CALL cv3_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1, thnk1, & ! nd->na
1012	pbase1, buoybase1, iflag1, sig1, w01)
1013
1014
1015	! print*, 'IFLAG1 apres cv3_triger'
1016	! print*,'len,nd',len,nd
1017	! write(*,'(64i1)') iflag1(2:len-1)
1018
1019	! call dump2d(iim,jjm-1,sig1(2)
1020	END IF
1021
1022	IF (iflag_con==4) THEN
1023	if (prt_level >= 9) &
1024	PRINT *, 'cva_driver -> cv_trigger'
1025	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
1026	END IF
1027
1028
1029	! =====================================================================
1030	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
1031	! =====================================================================
1032
1033	! Determine the number "ncum" of convective gridpoints, the list "idcum" of convective
1034	! gridpoints and the weights "coef_convective" (= 1. for convective gridpoints and = 0.
1035	! elsewhere).
1036	ncum = 0
1037	coef_convective(:) = 0.
1038	DO i = 1, len
1039	IF (iflag1(i)==0) THEN
1040	coef_convective(i) = 1.
1041	ncum = ncum + 1
1042	idcum(ncum) = i
1043	END IF
1044	END DO
1045
1046	! print*,'len, ncum = ',len,ncum
1047
1048	IF (ncum>0) THEN
1049
1050	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1051	! --- COMPRESS THE FIELDS
1052	! (-> vectorization over convective gridpoints)
1053	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1054
1055	IF (iflag_con==3) THEN
1056	! print*,'ncum tv1 ',ncum,tv1
1057	! print*,'tvp1 ',tvp1
1058	!jyg<
1059	! If the fraction of convective points is larger than comp_threshold, then compression
1060	! is assumed useless.
1061	!
1062	compress = ncum .lt. len*comp_threshold
1063	!
1064	IF (.not. compress) THEN
1065	DO i = 1,len
1066	idcum(i) = i
1067	ENDDO
1068	ENDIF
1069	!
1070	#ifdef ISO
1071	#ifdef ISOVERIF
1072	do k=1,nd
1073	do i = 1, nloc
1074	if (iso_eau.gt.0) then
1075	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
1076	& 'cva_driver 541a',errmax,errmaxrel)
1077	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
1078	& 'cva_driver 541b',errmax,errmaxrel)
1079	endif ! if (iso_eau.gt.0) then
1080	#ifdef ISOTRAC
1081	call iso_verif_traceur(xt1(1,i,k),'cva_driver 689')
1082	#endif
1083	enddo
1084	enddo
1085	#endif
1086	#endif
1087
1088	!>jyg
1089	if (prt_level >= 9) &
1090	PRINT *, 'cva_driver -> cv3a_compress'
1091	CALL cv3a_compress(len, nloc, ncum, nd, ntra, compress, &
1092	iflag1, nk1, icb1, icbs1, &
1093	plcl1, tnk1, qnk1, gznk1, hnk1, unk1, vnk1, &
1094	wghti1, pbase1, buoybase1, &
1095	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, &
1096	u1, v1, gz1, th1, th1_wake, &
1097	tra1, &
1098	h1, lv1, lf1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
1099	h1_wake, lv1_wake, lf1_wake, cpn1_wake, tv1_wake, &
1100	sig1, w01, ptop21, &
1101	Ale1, Alp1, omega1, &
1102	iflag, nk, icb, icbs, &
1103	plcl, tnk, qnk, gznk, hnk, unk, vnk, &
1104	wghti, pbase, buoybase, &
1105	t, q, qs, t_wake, q_wake, qs_wake, s_wake, &
1106	u, v, gz, th, th_wake, &
1107	tra, &
1108	h, lv, lf, cpn, p, ph, tv, tp, tvp, clw, &
1109	h_wake, lv_wake, lf_wake, cpn_wake, tv_wake, &
1110	sig, w0, ptop2, &
1111	Ale, Alp, omega &
1112	#ifdef ISO
1113	& ,xtnk1,xt1,xt1_wake,xtclw1 &
1114	& ,xtnk,xt,xt_wake,xtclw &
1115	#endif
1116	& )
1117
1118	! print*,'tv ',tv
1119	! print*,'tvp ',tvp
1120
1121	#ifdef ISO
1122	#ifdef ISOVERIF
1123	write(,) 'cva_driver 720: apres cv3_compress'
1124	! write(,) 'len, nloc, ncum,nd=',len, nloc, ncum,nd
1125	do k=1,nd
1126	do i = 1, ncum
1127	if (iso_eau.gt.0) then
1128	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
1129	& 'cva_driver 598',errmax,errmaxrel)
1130	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1131	& 'cva_driver 600',errmax,errmaxrel)
1132	call iso_verif_egalite_choix(xt_wake(iso_eau,i,k),q_wake(i,k), &
1133	& 'cva_driver 602',errmax,errmaxrel)
1134	endif ! if (iso_eau.gt.0) then
1135	if (iso_HDO.gt.0) then
1136	call iso_verif_aberrant_choix( &
1137	& xt(iso_HDO,i,k),q(i,k), &
1138	& ridicule,deltalim,'cva_driver 735, apres compress')
1139	endif !if (iso_HDO.gt.0) then
1140	#ifdef ISOTRAC
1141	call iso_verif_traceur(xt(1,i,k),'cva_driver 726')
1142	#endif
1143	enddo
1144	enddo
1145	do i = 1, ncum
1146	do k=1,nd
1147	call iso_verif_positif(q(i,k),'cva_driver 966a')
1148	enddo !do k=1,nd
1149	call iso_verif_positif(qnk(i),'cva_driver 966b')
1150	enddo !do i = 1, ncum
1151	! write(,) 'cva_driver 1142: apres cv3_compress OK'
1152	#endif
1153	#endif
1154
1155	END IF
1156
1157	IF (iflag_con==4) THEN
1158	if (prt_level >= 9) &
1159	PRINT *, 'cva_driver -> cv_compress'
1160	CALL cv_compress(len, nloc, ncum, nd, &
1161	iflag1, nk1, icb1, &
1162	cbmf1, plcl1, tnk1, qnk1, gznk1, &
1163	t1, q1, qs1, u1, v1, gz1, &
1164	h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
1165	iflag, nk, icb, &
1166	cbmf, plcl, tnk, qnk, gznk, &
1167	t, q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, &
1168	dph)
1169	END IF
1170
1171	! -------------------------------------------------------------------
1172	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
1173	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
1174	! --- &
1175	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
1176	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
1177	! --- &
1178	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
1179	! -------------------------------------------------------------------
1180
1181	IF (iflag_con==3) THEN
1182	if (prt_level >= 9) &
1183	PRINT *, 'cva_driver -> cv3_undilute2'
1184	CALL cv3_undilute2(nloc, ncum, nd, iflag, icb, icbs, nk, & !na->nd
1185	tnk, qnk, gznk, hnk, t, q, qs, gz, &
1186	p, ph, h, tv, lv, lf, pbase, buoybase, plcl, &
1187	inb, tp, tvp, clw, hp, ep, sigp, buoy, &
1188	frac_a, frac_s, qpreca, qta & !!jygprl
1189	#ifdef ISO
1190	& ,xtnk,xt,xtclw,xtta &
1191	#endif
1192	& )
1193	#ifdef ISO
1194	#ifdef ISOVERIF
1195	do k=1,nd
1196	do i = 1, ncum
1197	if (iso_eau.gt.0) then
1198	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
1199	& 'cva_driver 650',errmax,errmaxrel)
1200	call iso_verif_egalite_choix(xtta(iso_eau,i,k),qta(i,k), &
1201	& 'cva_driver 651',errmax,errmaxrel)
1202	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1203	& 'cva_driver 652',errmax,errmaxrel)
1204	endif ! if (iso_eau.gt.0) then
1205	if (iso_HDO.gt.0) then
1206	call iso_verif_aberrant_choix( &
1207	& xt(iso_HDO,i,k),q(i,k), &
1208	& ridicule,deltalim,'cva_driver 794, apres undilute2')
1209	endif !if (iso_HDO.gt.0) then
1210	#ifdef ISOTRAC
1211	call iso_verif_traceur(xt(1,i,k),'cva_driver 780')
1212	call iso_verif_traceur(xtclw(1,i,k),'cva_driver 781')
1213	#endif
1214	enddo
1215	enddo !do k=1,nd
1216	#ifdef VERIFNEGATIF
1217	do i = 1, ncum
1218	do k=1,nd
1219	call iso_verif_positif(q(i,k),'cva_driver 1052')
1220	enddo !do k=1,nd
1221	call iso_verif_positif(qnk(i),'cva_driver 1054')
1222	enddo !do i = 1, ncum
1223	#endif
1224	#endif
1225	!write(,) 'SORTIE CV3_UNDILUTE2'
1226	#endif
1227
1228	END IF
1229
1230	IF (iflag_con==4) THEN
1231	if (prt_level >= 9) &
1232	PRINT *, 'cva_driver -> cv_undilute2'
1233	CALL cv_undilute2(nloc, ncum, nd, icb, nk, &
1234	tnk, qnk, gznk, t, q, qs, gz, &
1235	p, dph, h, tv, lv, &
1236	inb, inbis, tp, tvp, clw, hp, ep, sigp, frac_s)
1237	END IF
1238
1239	! epmax_cape
1240	! on recalcule ep et hp
1241	if (prt_level >= 9) &
1242	PRINT *, 'cva_driver -> cv3_epmax_cape'
1243	call cv3_epmax_fn_cape(nloc,ncum,nd &
1244	, ep,hp,icb,inb,clw,nk,t,h,hnk,lv,lf,frac_s &
1245	, pbase, p, ph, tv, buoy, sig, w0,iflag &
1246	, epmax_diag)
1247
1248	! -------------------------------------------------------------------
1249	! --- MIXING(1) (if iflag_mix .ge. 1)
1250	! -------------------------------------------------------------------
1251	IF (iflag_con==3) THEN
1252	! IF ((iflag_ice_thermo==1) .AND. (iflag_mix/=0)) THEN
1253	! WRITE (, ) ' iflag_ice_thermo==1 requires iflag_mix==0', ' but iflag_mix=', iflag_mix, &
1254	! '. Might as well stop here.'
1255	! STOP
1256	! END IF
1257	IF (iflag_mix>=1) THEN
1258	CALL zilch(supmax, nloc*nd)
1259	if (prt_level >= 9) &
1260	PRINT *, 'cva_driver -> cv3p_mixing'
1261	CALL cv3p_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
1262	!! ph, t, q, qs, u, v, tra, h, lv, lf, frac, qnk, &
1263	ph, t, q, qs, u, v, tra, h, lv, lf, frac_s, qta, & !!jygprl
1264	unk, vnk, hp, tv, tvp, ep, clw, sig, &
1265	ment, qent, hent, uent, vent, nent, &
1266	sigij, elij, supmax, ments, qents, traent &
1267	#ifdef ISO
1268	& ,xt,xtta,xtclw,xtent,xtelij &
1269	#endif
1270	& )
1271	! print*, 'cv3p_mixing-> supmax ', (supmax(1,k), k=1,nd)
1272
1273	ELSE
1274	CALL zilch(supmax, nloc*nd)
1275	END IF
1276	END IF
1277	! -------------------------------------------------------------------
1278	! --- CLOSURE
1279	! -------------------------------------------------------------------
1280
1281
1282	IF (iflag_con==3) THEN
1283	IF (iflag_clos==0) THEN
1284	if (prt_level >= 9) &
1285	PRINT *, 'cva_driver -> cv3_closure'
1286	CALL cv3_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1287	pbase, p, ph, tv, buoy, &
1288	sig, w0, cape, m, iflag)
1289	END IF ! iflag_clos==0
1290
1291	ok_inhib = iflag_mix == 2
1292
1293	IF (iflag_clos==1) THEN
1294	PRINT *, ' pas d appel cv3p_closure'
1295	! c CALL cv3p_closure(nloc,ncum,nd,icb,inb ! na->nd
1296	! c : ,pbase,plcl,p,ph,tv,tvp,buoy
1297	! c : ,supmax
1298	! c o ,sig,w0,ptop2,cape,cin,m)
1299	END IF ! iflag_clos==1
1300
1301	IF (iflag_clos==2) THEN
1302	if (prt_level >= 9) &
1303	PRINT *, 'cva_driver -> cv3p1_closure'
1304	CALL cv3p1_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1305	pbase, plcl, p, ph, tv, tvp, buoy, &
1306	supmax, ok_inhib, Ale, Alp, omega, &
1307	sig, w0, ptop2, cape, cin, m, iflag, coef_clos, &
1308	Plim1, plim2, asupmax, supmax0, &
1309	asupmaxmin, cbmf, plfc, wbeff)
1310	if (prt_level >= 10) &
1311	PRINT *, 'cv3p1_closure-> plfc,wbeff ', plfc(1), wbeff(1)
1312	END IF ! iflag_clos==2
1313
1314	IF (iflag_clos==3) THEN
1315	if (prt_level >= 9) &
1316	PRINT *, 'cva_driver -> cv3p2_closure'
1317	CALL cv3p2_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1318	pbase, plcl, p, ph, tv, tvp, buoy, &
1319	supmax, ok_inhib, Ale, Alp, omega, &
1320	sig, w0, ptop2, cape, cin, m, iflag, coef_clos, &
1321	Plim1, plim2, asupmax, supmax0, &
1322	asupmaxmin, cbmf, plfc, wbeff)
1323	if (prt_level >= 10) &
1324	PRINT *, 'cv3p2_closure-> plfc,wbeff ', plfc(1), wbeff(1)
1325	END IF ! iflag_clos==3
1326	END IF ! iflag_con==3
1327
1328	IF (iflag_con==4) THEN
1329	if (prt_level >= 9) &
1330	PRINT *, 'cva_driver -> cv_closure'
1331	CALL cv_closure(nloc, ncum, nd, nk, icb, &
1332	tv, tvp, p, ph, dph, plcl, cpn, &
1333	iflag, cbmf)
1334	END IF
1335
1336	! print *,'cv_closure-> cape ',cape(1)
1337
1338	! -------------------------------------------------------------------
1339	! --- MIXING(2)
1340	! -------------------------------------------------------------------
1341
1342	IF (iflag_con==3) THEN
1343	IF (iflag_mix==0) THEN
1344	if (prt_level >= 9) &
1345	PRINT *, 'cva_driver -> cv3_mixing'
1346	CALL cv3_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
1347	ph, t, q, qs, u, v, tra, h, lv, lf, frac_s, qnk, &
1348	unk, vnk, hp, tv, tvp, ep, clw, m, sig, &
1349	ment, qent, uent, vent, nent, sigij, elij, ments, qents, traent &
1350	#ifdef ISO
1351	& ,xt,xtnk,xtclw &
1352	& ,xtent,xtelij &
1353	#endif
1354	& )
1355	CALL zilch(hent, nlocndnd)
1356
1357	#ifdef ISO
1358	#ifdef ISOVERIF
1359	write(,) 'cva_driver 837: apres cv3_mixing'
1360	! write(,) 'qent,xtent(1,1,1)=',qent(1,1,1),xtent(iso_eau,1,1,1)
1361	do k=1,nd
1362	do j = 1, nd
1363	do i = 1, ncum
1364	if (iso_eau.gt.0) then
1365	call iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), &
1366	& elij(i,j,k),'cva_driver 881',errmax,errmaxrel)
1367	call iso_verif_egalite_choix(xtent(iso_eau,i,j,k), &
1368	& qent(i,j,k),'cva_driver 882',errmax,errmaxrel)
1369	endif ! if (iso_eau.gt.0) then
1370	#ifdef ISOTRAC
1371	call iso_verif_traceur_justmass(xtent(1,i,j,k), &
1372	& 'cva_driver 846')
1373	call iso_verif_traceur_justmass(xtelij(1,i,j,k), &
1374	& 'cva_driver 847')
1375	! on ne vérfier pas le deltaD ici car peut dépasser le seuil
1376	! raisonable pour températures très froides.
1377	#endif
1378	enddo !do i = 1, ncum
1379	enddo !do j = 1, nd
1380	enddo !do k=1,nd
1381	do k=1,nd
1382	do i = 1, ncum
1383	if (iso_eau.gt.0) then
1384	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1385	& 'cva_driver 709',errmax,errmaxrel)
1386	endif ! if (iso_eau.gt.0) then
1387	#ifdef ISOTRAC
1388	call iso_verif_traceur(xt(1,i,k),'cva_driver 856')
1389	if (option_tmin.eq.1) then
1390	if (iso_verif_positif_nostop(xtclw(itZonIso( &
1391	& izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) &
1392	& ,'cva_driver 909').eq.1) then
1393	write(,) 'i,k=',i,k
1394	write(,) 'xtclw=',xtclw(:,i,k)
1395	stop
1396	endif !if (iso_verif_positif_nostop(xtclw(itZonIso(
1397	endif !if ((option_traceurs.eq.17).or.
1398	#endif
1399	enddo
1400	enddo !do k=1,nd
1401	#endif
1402	#endif
1403
1404	ELSE
1405	!!jyg: Essais absurde pour voir
1406	!! mm(:,1) = 0.
1407	!! DO i = 2,nd
1408	!! mm(:,i) = m(:,i)*(1.-qta(:,i-1))
1409	!! ENDDO
1410	mm(:,:) = m(:,:)
1411	CALL cv3_mixscale(nloc, ncum, nd, ment, mm)
1412	IF (debut) THEN
1413	PRINT *, ' cv3_mixscale-> '
1414	END IF !(debut) THEN
1415	END IF
1416	END IF
1417
1418	IF (iflag_con==4) THEN
1419	if (prt_level >= 9) &
1420	PRINT *, 'cva_driver -> cv_mixing'
1421	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, &
1422	ph, t, q, qs, u, v, h, lv, qnk, &
1423	hp, tv, tvp, ep, clw, cbmf, &
1424	m, ment, qent, uent, vent, nent, sigij, elij)
1425	END IF
1426
1427	IF (debut) THEN
1428	PRINT *, ' cv_mixing ->'
1429	END IF !(debut) THEN
1430	! do i = 1,nd
1431	! print*,'cv_mixing-> i,ment ',i,(ment(1,i,j),j=1,nd)
1432	! enddo
1433
1434	! -------------------------------------------------------------------
1435	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
1436	! -------------------------------------------------------------------
1437	IF (iflag_con==3) THEN
1438	IF (debut) THEN
1439	PRINT *, ' cva_driver -> cv3_unsat '
1440	END IF !(debut) THEN
1441	#ifdef ISO
1442	#ifdef ISOVERIF
1443	do k=1,nd
1444	do i = 1, ncum
1445	if (iso_eau.gt.0) then
1446	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1447	& 'cva_driver 753a',errmax,errmaxrel)
1448	call iso_verif_egalite_choix(xt_wake(iso_eau,i,k),q_wake(i,k), &
1449	& 'cva_driver 753b',errmax,errmaxrel)
1450	endif ! if (iso_eau.gt.0) then
1451	#ifdef ISOTRAC
1452	call iso_verif_traceur(xt(1,i,k),'cva_driver 885')
1453	#endif
1454	enddo
1455	enddo !do k=1,nd
1456	#endif
1457	#endif
1458
1459	if (prt_level >= 9) &
1460	PRINT *, 'cva_driver -> cv3_unsat'
1461	CALL cv3_unsat(nloc, ncum, nd, nd, ntra, icb, inb, iflag, & ! na->nd
1462	t_wake, q_wake, qs_wake, gz, u, v, tra, p, ph, &
1463	th_wake, tv_wake, lv_wake, lf_wake, cpn_wake, &
1464	ep, sigp, clw, frac_s, qpreca, frac_a, qta, & !!jygprl
1465	m, ment, elij, delt, plcl, coef_clos, &
1466	mp, qp, up, vp, trap, wt, water, evap, fondue, ice, &
1467	faci, b, sigd, &
1468	!! wdtrainA, wdtrainM) ! RomP
1469	wdtrainA, wdtrainS, wdtrainM & !!jygprl
1470	#ifdef ISO
1471	& ,xt_wake,xtclw,xtelij &
1472	& ,xtp,xtwater,xtevap,xtice,xtwdtrainA &
1473	#endif
1474	& )
1475	!
1476	IF (prt_level >= 10) THEN
1477	Print *, 'cva_driver after cv3_unsat:mp , water, ice, evap, fondue '
1478	DO k = 1,nd
1479	write (6, '(i4,5(1x,e13.6))'), &
1480	k, mp(igout,k), water(igout,k), ice(igout,k), &
1481	evap(igout,k), fondue(igout,k)
1482	ENDDO
1483	Print *, 'cva_driver after cv3_unsat: wdtrainA, wdtrainS, wdtrainM ' !!jygprl
1484	DO k = 1,nd
1485	write (6, '(i4,3(1x,e13.6))'), &
1486	k, wdtrainA(igout,k), wdtrainS(igout,k), wdtrainM(igout,k) !!jygprl
1487	ENDDO
1488	ENDIF
1489	!
1490	END IF !(iflag_con==3)
1491
1492	IF (iflag_con==4) THEN
1493	if (prt_level >= 9) &
1494	PRINT *, 'cva_driver -> cv_unsat'
1495	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, &
1496	h, lv, ep, sigp, clw, m, ment, elij, &
1497	iflag, mp, qp, up, vp, wt, water, evap)
1498	END IF
1499
1500	IF (debut) THEN
1501	PRINT *, 'cv_unsat-> '
1502	END IF !(debut) THEN
1503
1504	#ifdef ISO
1505	#ifdef ISOTRAC
1506	if (option_traceurs.eq.6) then
1507	! on colorie les ddfts en rouge, le reste est en blanc.
1508	do k=1,nd
1509	do i = 1, ncum
1510	do iiso=1,niso
1511	ixt_ddft=itZonIso(izone_ddft,iiso)
1512	ixt_poubelle=itZonIso(izone_poubelle,iiso)
1513	xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) &
1514	& +xtp(ixt_poubelle,i,k)
1515	xtp(ixt_poubelle,i,k)=0.0
1516	enddo !do iiso=1,niso
1517	#ifdef ISOVERIF
1518	call iso_verif_traceur(xtp(1,i,k),'cva_driver 990')
1519	#endif
1520	enddo !do i = 1, ncum
1521	enddo !do k=1,nd
1522	else if (option_traceurs.eq.19) then
1523	! on colorie les ddfts, mais on sauve la revap
1524	do k=1,nd
1525	do i = 1, ncum
1526	do izone=1,nzone
1527	if (izone.eq.izone_ddft) then
1528	do iiso=1,niso
1529	ixt_ddft=itZonIso(izone,iiso)
1530	ixt_revap=itZonIso(izone_revap,iiso)
1531	xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k)
1532	enddo !do iiso=1,niso
1533	elseif (izone.eq.izone_ddft) then
1534	! rien à faire
1535	else !if (izone.eq.izone_ddft) then
1536	do iiso=1,niso
1537	ixt=itZonIso(izone,iiso)
1538	xtp(ixt,i,k)=0.0
1539	enddo !do iiso=1,niso
1540	endif !if (izone.eq.izone_ddft) then
1541	enddo !do izone=1,nzone
1542	#ifdef ISOVERIF
1543	call iso_verif_traceur(xtp(1,i,k),'cva_driver 1059')
1544	#endif
1545	enddo !do i = 1, ncum
1546	enddo !do k=1,nd
1547	endif !if (option_traceurs.eq.6) then
1548	#endif
1549	#endif
1550
1551	! print *,'cv_unsat-> mp ',mp
1552	! print *,'cv_unsat-> water ',water
1553	! -------------------------------------------------------------------
1554	! --- YIELD
1555	! (tendencies, precipitation, variables of interface with other
1556	! processes, etc)
1557	! -------------------------------------------------------------------
1558
1559	IF (iflag_con==3) THEN
1560
1561	if (prt_level >= 9) &
1562	PRINT *, 'cva_driver -> cv3_yield'
1563	CALL cv3_yield(nloc, ncum, nd, nd, ntra, ok_conserv_q, & ! na->nd
1564	icb, inb, delt, &
1565	t, q, t_wake, q_wake, s_wake, u, v, tra, &
1566	gz, p, ph, h, hp, lv, lf, cpn, th, th_wake, &
1567	ep, clw, qpreca, m, tp, mp, qp, up, vp, trap, &
1568	wt, water, ice, evap, fondue, faci, b, sigd, &
1569	ment, qent, hent, iflag_mix, uent, vent, &
1570	nent, elij, traent, sig, &
1571	tv, tvp, wghti, &
1572	iflag, precip, Vprecip, Vprecipi, ft, fq, fu, fv, ftra, & ! jyg
1573	cbmf, upwd, dnwd, dnwd0, ma, mip, &
1574	!! tls, tps, & ! useless . jyg
1575	qcondc, wd, &
1576	!! ftd, fqd, qnk, qtc, sigt, tau_cld_cv, coefw_cld_cv)
1577	ftd, fqd, qta, qtc, sigt, tau_cld_cv, coefw_cld_cv & !!jygprl
1578	#ifdef ISO
1579	& ,xt,xt_wake,xtclw,xtp,xtwater,xtice,xtevap &
1580	& ,xtent,xtelij,xtprecip,fxt,fxtd,xtVprecip,xtVprecipi &
1581	#ifdef DIAGISO
1582	& ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1583	& ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
1584	& ,f_detrainement,q_detrainement,xt_detrainement &
1585	#endif
1586	#endif
1587	& )
1588	!
1589	! Test conseravtion de l'eau
1590	!
1591
1592	#ifdef ISOVERIF
1593	DO k = 1, nd
1594	DO i = 1, ncum
1595	if (iso_HDO.gt.0) then
1596	if (q(i,k)+delt*fq(i,k).gt.ridicule) then
1597	call iso_verif_aberrant( &
1598	& (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
1599	& /(q(i,k)+delt*fq(i,k)),'cva_driver 855a')
1600	if (iso_O18.gt.0) then
1601	call iso_verif_O18_aberrant( &
1602	& (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
1603	& /(q(i,k)+delt*fq(i,k)), &
1604	& (xt(iso_O18,i,k)+delt*fxt(iso_O18,i,k)) &
1605	& /(q(i,k)+delt*fq(i,k)),'cva_driver 855b')
1606	endif
1607	endif
1608	endif
1609	if (iso_eau.gt.0) then
1610	call iso_verif_egalite_choix(fxt(iso_eau,i,k), &
1611	& fq(i,k),'cva_driver 1305',errmax,errmaxrel)
1612	endif
1613	#ifdef ISOTRAC
1614	call iso_verif_traceur(xt(1,i,k),'cva_driver 1008')
1615	#endif
1616	enddo
1617	enddo
1618	#endif
1619	IF (debut) THEN
1620	PRINT *, ' cv3_yield -> fqd(1) = ', fqd(igout, 1)
1621	END IF !(debut) THEN
1622	!
1623	IF (prt_level >= 10) THEN
1624	Print *, 'cva_driver after cv3_yield:ft(1) , ftd(1) ', &
1625	ft(igout,1), ftd(igout,1)
1626	Print *, 'cva_driver after cv3_yield:fq(1) , fqd(1) ', &
1627	fq(igout,1), fqd(igout,1)
1628	ENDIF
1629	!
1630	END IF
1631
1632	IF (iflag_con==4) THEN
1633	if (prt_level >= 9) &
1634	PRINT *, 'cva_driver -> cv_yield'
1635	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, &
1636	t, q, u, v, &
1637	gz, p, ph, h, hp, lv, cpn, &
1638	ep, clw, frac_s, m, mp, qp, up, vp, &
1639	wt, water, evap, &
1640	ment, qent, uent, vent, nent, elij, &
1641	tv, tvp, &
1642	iflag, wd, qprime, tprime, &
1643	precip, cbmf, ft, fq, fu, fv, ma, qcondc)
1644	END IF
1645
1646	!AC!
1647	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1648	!--- passive tracers
1649	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1650
1651	IF (iflag_con==3) THEN
1652	!RomP >>>
1653	if (prt_level >= 9) &
1654	PRINT *, 'cva_driver -> cv3_tracer'
1655	CALL cv3_tracer(nloc, len, ncum, nd, nd, &
1656	ment, sigij, da, phi, phi2, d1a, dam, &
1657	ep, vprecip, elij, clw, epmlmMm, eplaMm, &
1658	icb, inb)
1659	!RomP <<<
1660	END IF
1661
1662	!AC!
1663
1664	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1665	! --- UNCOMPRESS THE FIELDS
1666	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1667
1668
1669	IF (iflag_con==3) THEN
1670	if (prt_level >= 9) &
1671	PRINT *, 'cva_driver -> cv3a_uncompress'
1672	CALL cv3a_uncompress(nloc, len, ncum, nd, ntra, idcum, compress, &
1673	iflag, icb, inb, &
1674	precip, cbmf, plcl, plfc, wbeff, sig, w0, ptop2, &
1675	ft, fq, fu, fv, ftra, &
1676	sigd, ma, mip, vprecip, vprecipi, upwd, dnwd, dnwd0, &
1677	qcondc, wd, cape, cin, &
1678	tvp, &
1679	ftd, fqd, &
1680	Plim1, plim2, asupmax, supmax0, &
1681	asupmaxmin, &
1682	da, phi, mp, phi2, d1a, dam, sigij, & ! RomP
1683	qta, clw, elij, evap, ep, epmlmMm, eplaMm, & ! RomP
1684	wdtrainA, wdtrainS, wdtrainM, & ! RomP
1685	qtc, sigt, epmax_diag, & ! epmax_cape
1686	iflag1, kbas1, ktop1, &
1687	precip1, cbmf1, plcl1, plfc1, wbeff1, sig1, w01, ptop21, &
1688	ft1, fq1, fu1, fv1, ftra1, &
1689	sigd1, ma1, mip1, vprecip1, vprecipi1, upwd1, dnwd1, dnwd01, &
1690	qcondc1, wd1, cape1, cin1, &
1691	tvp1, &
1692	ftd1, fqd1, &
1693	Plim11, plim21, asupmax1, supmax01, &
1694	asupmaxmin1, &
1695	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, & ! RomP
1696	qta1, clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP
1697	wdtrainA1, wdtrainS1, wdtrainM1, & ! RomP
1698	qtc1, sigt1, epmax_diag1 & ! epmax_cape
1699	#ifdef ISO
1700	& ,xtprecip,fxt,fxtd, xtVprecip,xtVprecipi, xtclw,xtevap,xtwdtraina &
1701	& ,xtprecip1,fxt1,fxtd1, xtVprecip1, xtVprecipi1, xtclw1,xtevap1,xtwdtraina1 &
1702	#ifdef DIAGISO
1703	& , water,xtwater,qp,xtp &
1704	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1705	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip &
1706	& , f_detrainement,q_detrainement,xt_detrainement &
1707	& , water1,xtwater1,qp1,xtp1 &
1708	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
1709	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
1710	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
1711	#endif
1712	#endif
1713	& )
1714
1715
1716	#ifdef ISOVERIF
1717	DO k = 1, nd
1718	DO i = 1, len
1719	if (iso_HDO.gt.0) then
1720	if (q1(i,k).gt.ridicule) then
1721	call iso_verif_aberrant( &
1722	& (xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) &
1723	& /(q1(i,k)+delt*fq1(i,k)),'cva_driver 2554')
1724	endif
1725	endif !if (iso_HDO.gt.0) then
1726	if (iso_eau.gt.0) then
1727	call iso_verif_egalite_choix(fxt1(iso_eau,i,k), &
1728	& fq1(i,k),'cva_driver 1383',errmax,errmaxrel)
1729	endif
1730	do ixt=1,ntraciso
1731	if (iso_verif_noNaN_nostop(fxtd1(ixt,i,k), &
1732	& 'cva_driver 1447').eq.1) then
1733	write(,) 'i,k=', i,k
1734	stop
1735	endif !if (iso_verif_noNaN_nostop(fxtd1(ixt,i,k),
1736	enddo
1737	enddo
1738	enddo
1739	#endif
1740
1741	!
1742	IF (prt_level >= 10) THEN
1743	Print *, 'cva_driver after cv3_uncompress:ft1(1) , ftd1(1) ', &
1744	ft1(igout,1), ftd1(igout,1)
1745	Print *, 'cva_driver after cv3_uncompress:fq1(1) , fqd1(1) ', &
1746	fq1(igout,1), fqd1(igout,1)
1747	ENDIF
1748	!
1749	END IF
1750
1751	IF (iflag_con==4) THEN
1752	if (prt_level >= 9) &
1753	PRINT *, 'cva_driver -> cv_uncompress'
1754	CALL cv_uncompress(nloc, len, ncum, nd, idcum, &
1755	iflag, &
1756	precip, cbmf, &
1757	ft, fq, fu, fv, &
1758	ma, qcondc, &
1759	iflag1, &
1760	precip1,cbmf1, &
1761	ft1, fq1, fu1, fv1, &
1762	ma1, qcondc1)
1763	END IF
1764
1765	END IF ! ncum>0
1766	!
1767	!
1768	DO i = 1,len
1769	IF (iflag1(i) == 14) THEN
1770	Cin1(i) = Cin_noconv
1771	Cape1(i) = Cape_noconv
1772	ENDIF
1773	ENDDO
1774
1775	!
1776	! In order take into account the possibility of changing the compression,
1777	! reset m, sig and w0 to zero for non-convective points.
1778	DO k = 1,nd-1
1779	sig1(:, k) = sig1(:, k)*coef_convective(:)
1780	w01(:, k) = w01(:, k)*coef_convective(:)
1781	ENDDO
1782
1783	IF (debut) THEN
1784	PRINT *, ' cv_uncompress -> '
1785	debut = .FALSE.
1786	END IF !(debut) THEN
1787
1788
1789	RETURN
1790	END SUBROUTINE cva_driver

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format