Context Navigation

cv_driver.F90 @ 5059

Last change on this file since 5059 was 4368, checked in by lguez, 2 years ago
Sync latest trunk changes to Ocean_skin
Property svn:keywords set to `Id`
File size: 43.2 KB

Rev	Line
[3927]	1
	2	! $Header$
	3
	4	SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, &
	5	tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, &
	6	cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, &
	7	wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & !
	8	! RomP
	9	evap1, ep1, epmlmmm1, eplamm1, & ! RomP
	10	wdtraina1, wdtrainm1, & ! RomP
	11	epmax_diag1 & ! epmax_cape
	12	#ifdef ISO
	13	& ,xt1,fxt1 &
	14	& ,xtprecip1,xtvprecip1 &
	15	& , xtevap1,xtclw1,xtwdtraina1 &
	16	#ifdef DIAGISO
	17	& , water1,xtwater1,qp1,xtp1 &
	18	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
	19	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
	20	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
	21	#endif
	22	#endif
	23	& )
	24
	25	USE dimphy
	26	#ifdef ISO
[4368]	27	USE infotrac_phy, ONLY: ntraciso=>ntiso,niso,itZonIso,nzone
[3927]	28	USE isotopes_mod, ONLY: iso_eau,iso_HDO,ridicule,bidouille_anti_divergence
	29	#ifdef ISOVERIF
	30	use isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, &
	31	iso_verif_egalite_choix,iso_verif_aberrant_choix, &
	32	iso_verif_aberrant, iso_verif_positif,iso_verif_positif_nostop
	33	#endif
	34	#ifdef ISOTRAC
	35	use isotrac_mod, only: option_traceurs,izone_ddft,izone_revap, &
	36	& izone_poubelle, index_zone,option_tmin,izone_cond
	37	#ifdef ISOVERIF
	38	USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, &
	39	& iso_verif_trac_masse_vect
	40	use isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille
	41	#endif
	42	#endif
	43	#endif
	44	IMPLICIT NONE
	45
	46	! .............................START PROLOGUE............................
	47
	48
	49	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a
	50	! "1" appended.
	51	! The "1" is removed for the corresponding compressed (local) variables.
	52
	53	! PARAMETERS:
	54	! Name Type Usage Description
	55	! ---------- ---------- ------- ----------------------------
	56
	57	! len Integer Input first (i) dimension
	58	! nd Integer Input vertical (k) dimension
	59	! ndp1 Integer Input nd + 1
	60	! ntra Integer Input number of tracors
	61	! iflag_con Integer Input version of convect (3/4)
	62	! t1 Real Input temperature
	63	! q1 Real Input specific hum
	64	! qs1 Real Input sat specific hum
	65	! u1 Real Input u-wind
	66	! v1 Real Input v-wind
	67	! tra1 Real Input tracors
	68	! p1 Real Input full level pressure
	69	! ph1 Real Input half level pressure
	70	! iflag1 Integer Output flag for Emanuel conditions
	71	! ft1 Real Output temp tend
	72	! fq1 Real Output spec hum tend
	73	! fu1 Real Output u-wind tend
	74	! fv1 Real Output v-wind tend
	75	! ftra1 Real Output tracor tend
	76	! precip1 Real Output precipitation
	77	! VPrecip1 Real Output vertical profile of
	78	! precipitations
	79	! cbmf1 Real Output cloud base mass flux
	80	! sig1 Real In/Out section adiabatic updraft
	81	! w01 Real In/Out vertical velocity within adiab
	82	! updraft
	83	! delt Real Input time step
	84	! Ma1 Real Output mass flux adiabatic updraft
	85	! upwd1 Real Output total upward mass flux
	86	! (adiab+mixed)
	87	! dnwd1 Real Output saturated downward mass flux
	88	! (mixed)
	89	! dnwd01 Real Output unsaturated downward mass flux
	90	! qcondc1 Real Output in-cld mixing ratio of
	91	! condensed water
	92	! wd1 Real Output downdraft velocity scale for
	93	! sfc fluxes
	94	! cape1 Real Output CAPE
	95
	96	! wdtrainA1 Real Output precipitation detrained from
	97	! adiabatic draught;
	98	! used in tracer transport (cvltr)
	99	! wdtrainM1 Real Output precipitation detrained from mixed
	100	! draughts;
	101	! used in tracer transport (cvltr)
	102	! da1 Real Output used in tracer transport (cvltr)
	103	! phi1 Real Output used in tracer transport (cvltr)
	104	! mp1 Real Output used in tracer transport (cvltr)
	105
	106	! phi21 Real Output used in tracer transport (cvltr)
	107
	108	! d1a1 Real Output used in tracer transport (cvltr)
	109	! dam1 Real Output used in tracer transport (cvltr)
	110
	111	! evap1 Real Output
	112	! ep1 Real Output
	113	! sij1 Real Output
	114	! elij1 Real Output
	115
	116	! S. Bony, Mar 2002:
	117	! * Several modules corresponding to different physical processes
	118	! * Several versions of convect may be used:
	119	! - iflag_con=3: version lmd (previously named convect3)
	120	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
	121	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
	122	! S. Bony, Oct 2002:
	123	! * Vectorization of convect3 (ie version lmd)
	124
	125	! ..............................END PROLOGUE.............................
	126
	127
	128	! Input
	129	INTEGER len
	130	INTEGER nd
	131	INTEGER ndp1
	132	INTEGER noff
	133	INTEGER iflag_con
	134	INTEGER ntra
	135	REAL delt
	136	REAL t1(len, nd)
	137	REAL q1(len, nd)
	138	REAL qs1(len, nd)
	139	REAL u1(len, nd)
	140	REAL v1(len, nd)
	141	REAL tra1(len, nd, ntra)
	142	REAL p1(len, nd)
	143	REAL ph1(len, ndp1)
	144
	145	! Output
	146	INTEGER iflag1(len)
	147	REAL ft1(len, nd)
	148	REAL fq1(len, nd)
	149	REAL fu1(len, nd)
	150	REAL fv1(len, nd)
	151	REAL ftra1(len, nd, ntra)
	152	REAL precip1(len)
	153	REAL cbmf1(len)
	154	REAL sig1(klon, klev)
	155	REAL w01(klon, klev)
	156	REAL vprecip1(len, nd+1)
	157	REAL evap1(len, nd) !RomP
	158	REAL ep1(len, nd) !RomP
	159	REAL ma1(len, nd)
	160	REAL upwd1(len, nd)
	161	REAL dnwd1(len, nd)
	162	REAL dnwd01(len, nd)
	163
	164	REAL qcondc1(len, nd) ! cld
	165	REAL wd1(len) ! gust
	166	REAL cape1(len)
	167
	168	! RomP >>>
	169	REAL wdtraina1(len, nd), wdtrainm1(len, nd)
	170	REAL sij1(len, nd, nd), elij1(len, nd, nd)
	171	REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd)
	172
	173	REAL phi21(len, nd, nd)
	174	REAL d1a1(len, nd), dam1(len, nd)
	175	REAL epmlmmm1(len, nd, nd), eplamm1(len, nd)
	176	! RomP <<<
	177	REAL epmax_diag1 (len) ! epmax_cape
	178
	179
	180	#ifdef ISO
	181	real xt1(ntraciso,len,nd)
	182	real fxt1(ntraciso,len,nd)
	183	real xtprecip1(ntraciso,len)
	184	real xtvprecip1(ntraciso,len,nd+1)
	185	real xtevap1(ntraciso,len,nd)
	186	real xtwdtraina1(ntraciso,len,nd)
	187	real xtelij1(ntraciso,len, nd, nd)
	188	#ifdef DIAGISO
	189	real water1(len,nd)
	190	real xtwater1(ntraciso,len,nd)
	191	real qp1(len,nd),xtp1(ntraciso,len,nd)
	192	real fq_detrainement1(len,nd)
	193	real f_detrainement1(len,nd)
	194	real q_detrainement1(len,nd)
	195	real fq_ddft1(len,nd)
	196	real fq_fluxmasse1(len,nd)
	197	real fq_evapprecip1(len,nd)
	198	real fxt_detrainement1(ntraciso,len,nd)
	199	real xt_detrainement1(ntraciso,len,nd)
	200	real fxt_ddft1(ntraciso,len,nd)
	201	real fxt_fluxmasse1(ntraciso,len,nd)
	202	real fxt_evapprecip1(ntraciso,len,nd)
	203	#endif
	204	#ifdef ISOVERIF
	205	real deltaD
	206	#endif
	207	#endif
	208
	209	! -------------------------------------------------------------------
	210	! Original Prologue by Kerry Emanuel.
	211	! -------------------------------------------------------------------
	212	! --- ARGUMENTS
	213	! -------------------------------------------------------------------
	214	! --- On input:
	215
	216	! t: Array of absolute temperature (K) of dimension ND, with first
	217	! index corresponding to lowest model level. Note that this array
	218	! will be altered by the subroutine if dry convective adjustment
	219	! occurs and if IPBL is not equal to 0.
	220
	221	! q: Array of specific humidity (gm/gm) of dimension ND, with first
	222	! index corresponding to lowest model level. Must be defined
	223	! at same grid levels as T. Note that this array will be altered
	224	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	225
	226	! qs: Array of saturation specific humidity of dimension ND, with first
	227	! index corresponding to lowest model level. Must be defined
	228	! at same grid levels as T. Note that this array will be altered
	229	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	230
	231	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
	232	! index corresponding with the lowest model level. Defined at
	233	! same levels as T. Note that this array will be altered if
	234	! dry convective adjustment occurs and if IPBL is not equal to 0.
	235
	236	! v: Same as u but for meridional velocity.
	237
	238	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
	239	! where NTRA is the number of different tracers. If no
	240	! convective tracer transport is needed, define a dummy
	241	! input array of dimension (ND,1). Tracers are defined at
	242	! same vertical levels as T. Note that this array will be altered
	243	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	244
	245	! p: Array of pressure (mb) of dimension ND, with first
	246	! index corresponding to lowest model level. Must be defined
	247	! at same grid levels as T.
	248
	249	! ph: Array of pressure (mb) of dimension ND+1, with first index
	250	! corresponding to lowest level. These pressures are defined at
	251	! levels intermediate between those of P, T, Q and QS. The first
	252	! value of PH should be greater than (i.e. at a lower level than)
	253	! the first value of the array P.
	254
	255	! nl: The maximum number of levels to which convection can penetrate, plus
	256	! 1.
	257	! NL MUST be less than or equal to ND-1.
	258
	259	! delt: The model time step (sec) between calls to CONVECT
	260
	261	! ----------------------------------------------------------------------------
	262	! --- On Output:
	263
	264	! iflag: An output integer whose value denotes the following:
	265	! VALUE INTERPRETATION
	266	! ----- --------------
	267	! 0 Moist convection occurs.
	268	! 1 Moist convection occurs, but a CFL condition
	269	! on the subsidence warming is violated. This
	270	! does not cause the scheme to terminate.
	271	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
	272	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
	273	! 4 No moist convection; atmosphere is not
	274	! unstable
	275	! 6 No moist convection because ihmin le minorig.
	276	! 7 No moist convection because unreasonable
	277	! parcel level temperature or specific humidity.
	278	! 8 No moist convection: lifted condensation
	279	! level is above the 200 mb level.
	280	! 9 No moist convection: cloud base is higher
	281	! then the level NL-1.
	282
	283	! ft: Array of temperature tendency (K/s) of dimension ND, defined at
	284	! same
	285	! grid levels as T, Q, QS and P.
	286
	287	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
	288	! defined at same grid levels as T, Q, QS and P.
	289
	290	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
	291	! defined at same grid levels as T.
	292
	293	! fv: Same as FU, but for forcing of meridional velocity.
	294
	295	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
	296	! second, defined at same levels as T. Dimensioned (ND,NTRA).
	297
	298	! precip: Scalar convective precipitation rate (mm/day).
	299
	300	! VPrecip: Vertical profile of convective precipitation (kg/m2/s).
	301
	302	! wd: A convective downdraft velocity scale. For use in surface
	303	! flux parameterizations. See convect.ps file for details.
	304
	305	! tprime: A convective downdraft temperature perturbation scale (K).
	306	! For use in surface flux parameterizations. See convect.ps
	307	! file for details.
	308
	309	! qprime: A convective downdraft specific humidity
	310	! perturbation scale (gm/gm).
	311	! For use in surface flux parameterizations. See convect.ps
	312	! file for details.
	313
	314	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
	315	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
	316	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
	317	! by the calling program between calls to CONVECT.
	318
	319	! det: Array of detrainment mass flux of dimension ND.
	320
	321	! -------------------------------------------------------------------
	322
	323	! Local arrays
	324
	325
	326	INTEGER i, k, n, il, j
	327	INTEGER icbmax
	328	INTEGER nk1(klon)
	329	INTEGER icb1(klon)
	330	INTEGER inb1(klon)
	331	INTEGER icbs1(klon)
	332
	333	REAL plcl1(klon)
	334	REAL tnk1(klon)
	335	REAL qnk1(klon)
	336	REAL gznk1(klon)
	337	REAL pnk1(klon)
	338	REAL qsnk1(klon)
	339	REAL pbase1(klon)
	340	REAL buoybase1(klon)
	341
	342	REAL lv1(klon, klev)
	343	REAL cpn1(klon, klev)
	344	REAL tv1(klon, klev)
	345	REAL gz1(klon, klev)
	346	REAL hm1(klon, klev)
	347	REAL h1(klon, klev)
	348	REAL tp1(klon, klev)
	349	REAL tvp1(klon, klev)
	350	REAL clw1(klon, klev)
	351	REAL th1(klon, klev)
	352
	353	#ifdef ISO
	354	integer ixt
	355	real xtclw1(ntraciso,klon,klev)
	356	REAL xtnk1(ntraciso,klon)
	357	#endif
	358
	359	INTEGER ncum
	360
	361	! (local) compressed fields:
	362
	363	! ym integer nloc
	364	! ym parameter (nloc=klon) ! pour l'instant
	365	#define nloc klon
	366	INTEGER idcum(nloc)
	367	INTEGER iflag(nloc), nk(nloc), icb(nloc)
	368	INTEGER nent(nloc, klev)
	369	INTEGER icbs(nloc)
	370	INTEGER inb(nloc), inbis(nloc)
	371
	372	REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc)
	373	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
	374	REAL u(nloc, klev), v(nloc, klev)
	375	REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev)
	376	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
	377	REAL clw(nloc, klev)
	378	REAL dph(nloc, klev)
	379	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
	380	REAL tvp(nloc, klev)
	381	REAL sig(nloc, klev), w0(nloc, klev)
	382	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
	383	REAL frac(nloc), buoy(nloc, klev)
	384	REAL cape(nloc)
	385	REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev)
	386	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
	387	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
	388	REAL sij(nloc, klev, klev), elij(nloc, klev, klev)
	389	REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev)
	390	REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev)
	391	REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev)
	392	REAL fu(nloc, klev), fv(nloc, klev)
	393	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
	394	REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev)
	395	REAL tps(nloc, klev), qprime(nloc), tprime(nloc)
	396	REAL precip(nloc)
	397	REAL vprecip(nloc, klev+1)
	398	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
	399	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
	400	REAL qcondc(nloc, klev) ! cld
	401	REAL wd(nloc) ! gust
	402
	403	! RomP >>>
	404	REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev)
	405	REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev)
	406	REAL phi2(nloc, klev, klev)
	407	REAL d1a(nloc, klev), dam(nloc, klev)
	408	REAL wdtraina(nloc, klev), wdtrainm(nloc, klev)
	409	REAL sigd(nloc)
	410	! RomP <<<
	411	REAL epmax_diag(nloc) ! epmax_cape
	412	#ifdef ISO
	413	real xt(ntraciso,nloc,klev)
	414	real xtnk(ntraciso,nloc)
	415	real xtclw(ntraciso,nloc,klev)
	416	real xtp(ntraciso,nloc,klev)
	417	real xtent(ntraciso,nloc,klev,klev)
	418	real xtelij(ntraciso,nloc,klev,klev)
	419	! real xtep(ntraciso,nloc,klev) ! le 7 mai: on supprime xtep
	420	real xtwater(ntraciso,nloc,klev)
	421	real xtevap(ntraciso,nloc,klev)
	422	real fxt(ntraciso,nloc,klev)
	423	real xtprecip(ntraciso,nloc)
	424	real xtvprecip(ntraciso,nloc,klev+1)
	425	real xtwdtraina(ntraciso,nloc,klev)
	426	#ifdef DIAGISO
	427	real fxt_detrainement(ntraciso,nloc,klev)
	428	real fxt_fluxmasse(ntraciso,nloc,klev)
	429	real fxt_evapprecip(ntraciso,nloc,klev)
	430	real fxt_ddft(ntraciso,nloc,klev)
	431	real fq_detrainement(nloc,klev)
	432	real f_detrainement(nloc,klev)
	433	real q_detrainement(nloc,klev)
	434	real xt_detrainement(ntraciso,nloc,klev)
	435	real fq_fluxmasse(nloc,klev)
	436	real fq_evapprecip(nloc,klev)
	437	real fq_ddft(nloc,klev)
	438	#endif
	439	#ifdef ISOTRAC
	440	integer iiso,ixt_ddft,ixt_poubelle,ixt_revap
	441	integer izone
	442	!#ifdef ISOVERIF
	443	! integer iso_verif_positif_nostop
	444	!#endif
	445	#endif
	446	#endif
	447
	448
	449	#ifdef ISO
	450	! verif
	451	#ifdef ISOVERIF
	452	write(,) 'cv_driver 391: ENTREE dans cv_driver'
	453	! write(,) 'nloc=',nloc
	454	if (iso_eau.gt.0) then
	455	do k = 1, klev
	456	do i = 1, nloc
	457	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
	458	& 'cv_driver 343',errmax,errmaxrel)
	459	enddo
	460	enddo
	461	endif !if (iso_eau.gt.0) then
	462	if (iso_HDO.gt.0) then
	463	do k = 1, klev
	464	do i = 1, nloc
	465	if (q1(i,k).gt.ridicule) then
	466	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
	467	& 'cv_driver 362')
	468	endif !if (q1(i,k).gt.ridicule) then
	469	enddo
	470	enddo
	471	endif !if (iso_eau.gt.0) then
	472	#ifdef ISOTRAC
	473	do k = 1, klev
	474	do i = 1, klon
	475	call iso_verif_traceur(xt1(1,i,k),'cv_driver 413')
	476	enddo
	477	enddo
	478	#endif
	479	#endif
	480	! end verif
	481	#endif
	482
	483
	484	nent(:, :) = 0
	485	! -------------------------------------------------------------------
	486	! --- SET CONSTANTS AND PARAMETERS
	487	! -------------------------------------------------------------------
	488	! print *, '-> cv_driver' !jyg
	489	! -- set simulation flags:
	490	! (common cvflag)
	491
	492	CALL cv_flag(0)
	493
	494	! -- set thermodynamical constants:
	495	! (common cvthermo)
	496
	497	CALL cv_thermo(iflag_con)
	498
	499	! -- set convect parameters
	500
	501	! includes microphysical parameters and parameters that
	502	! control the rate of approach to quasi-equilibrium)
	503	! (common cvparam)
	504
	505
	506	IF (iflag_con==30) THEN
	507	CALL cv30_param(nd, delt)
	508	END IF
	509
	510	IF (iflag_con==4) THEN
	511	CALL cv_param(nd)
	512	#ifdef ISO
[4368]	513	write(,) 'cv_driver 454: isos pas prevus ici'
[3927]	514	stop
	515	#endif
	516	END IF
	517
	518	! ---------------------------------------------------------------------
	519	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
	520	! ---------------------------------------------------------------------
	521
	522	inb(:) = 0.0
	523	inb1(:) = 0.0
	524	icb1(:) = 0.0
	525
	526	ft1(:, :) = 0.0
	527	fq1(:, :) = 0.0
	528	fu1(:, :) = 0.0
	529	fv1(:, :) = 0.0
	530	tvp1(:, :) = 0.0
	531	tp1(:, :) = 0.0
	532	clw1(:, :) = 0.0
	533	! ym
	534	clw(:, :) = 0.0
	535	gz1(:, :) = 0.
	536	vprecip1(:, :) = 0.
	537	ma1(:, :) = 0.0
	538	upwd1(:, :) = 0.0
	539	dnwd1(:, :) = 0.0
	540	dnwd01(:, :) = 0.0
	541	qcondc1(:, :) = 0.0
	542
	543	ftra1(:, :, :) = 0.0
	544
	545	elij1(:, :, :) = 0.0
	546	sij1(:, :, :) = 0.0
	547
	548	precip1(:) = 0.0
	549	iflag1(:) = 0
	550	wd1(:) = 0.0
	551	cape1(:) = 0.0
	552	epmax_diag1(:) = 0.0 ! epmax_cape
	553
	554
	555	#ifdef ISOVERIF
	556	#ifdef ISOTRAC
	557	do k=1,klev
	558	do i=1,klon
	559	call iso_verif_traceur(xt1(1,i,k),'cv_driver 510')
	560	enddo
	561	enddo
	562	#endif
	563	#endif
	564
	565	#ifdef ISO
	566	fxt1(:,:,:)=0.0
	567	xtclw1(:,:,:)=0.0
	568	xtclw(:,:,:)=0.0
	569	xtvprecip1(:,:,:) = 0.
	570	xtelij1(:, :, :, :) = 0.0
	571	#endif
	572
	573	IF (iflag_con==30) THEN
	574	DO il = 1, len
	575	sig1(il, nd) = sig1(il, nd) + 1.
	576	sig1(il, nd) = amin1(sig1(il,nd), 12.1)
	577	END DO
	578	END IF
	579
	580	! RomP >>>
	581	wdtraina1(:, :) = 0.
	582	wdtrainm1(:, :) = 0.
	583	da1(:, :) = 0.
	584	phi1(:, :, :) = 0.
	585	epmlmmm1(:, :, :) = 0.
	586	eplamm1(:, :) = 0.
	587	mp1(:, :) = 0.
	588	evap1(:, :) = 0.
	589	ep1(:, :) = 0.
	590	sij1(:, :, :) = 0.
	591	elij1(:, :, :) = 0.
	592	phi21(:, :, :) = 0.
	593	d1a1(:, :) = 0.
	594	dam1(:, :) = 0.
	595	! RomP <<<
	596	#ifdef ISO
	597	xtwdtraina1(:,:,:)=0.0
	598	xtevap1(:,:,:)=0.0
	599	xtelij1(:,:,:,:)=0.0
	600	#ifdef DIAGISO
	601	xtwater1(:,:,:)=0.0
	602	fxt_detrainement1(:,:,:)=0.0
	603	xt_detrainement1(:,:,:)=0.0
	604	fxt_ddft1(:,:,:)=0.0
	605	fxt_fluxmasse1(:,:,:)=0.0
	606	fxt_evapprecip1(:,:,:)=0.0
	607	xtp1(:,:,:)=0.0
	608	water1(:,:)=0.0
	609	qp1(:,:)=0.0
	610	fq_detrainement1(:,:)=0.0
	611	fq_ddft1(:,:)=0.0
	612	fq_fluxmasse1(:,:)=0.0
	613	fq_evapprecip1(:,:)=0.0
	614	#endif
	615	#endif
	616	! --------------------------------------------------------------------
	617	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
	618	! --------------------------------------------------------------------
	619
	620	IF (iflag_con==30) THEN
	621
	622	! print*,'Emanuel version 30 '
	623	CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na
	624	, lv1, cpn1, tv1, gz1, h1, hm1, th1)
	625	END IF
	626
	627	IF (iflag_con==4) THEN
	628	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, &
	629	hm1)
	630	END IF
	631
	632	! --------------------------------------------------------------------
	633	! --- CONVECTIVE FEED
	634	! --------------------------------------------------------------------
	635
	636	IF (iflag_con==30) THEN
	637	CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & !
	638	! nd->na
	639	, nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1 &
	640	#ifdef ISO
	641	,xt1,xtnk1 &
	642	#endif
	643	)
	644	END IF
	645
	646	IF (iflag_con==4) THEN
	647	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, &
	648	iflag1, tnk1, qnk1, gznk1, plcl1)
	649	END IF
	650
	651	! --------------------------------------------------------------------
	652	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
	653	! (up through ICB for convect4, up through ICB+1 for convect3)
	654	! Calculates the lifted parcel virtual temperature at nk, the
	655	! actual temperature, and the adiabatic liquid water content.
	656	! --------------------------------------------------------------------
	657
	658	IF (iflag_con==30) THEN
	659
	660	#ifdef ISOVERIF
	661	write(,) 'cv_driver 593: avant cv3_undilute1'
	662	do k=1,klev
	663	do i=1,klon
	664	if (iso_HDO.gt.0) then
	665	if (q1(i,k).gt.ridicule) then
	666	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
	667	& 'cv_driver 502')
	668	endif ! if (q1(i,k).gt.ridicule) then
	669	endif !if (iso_HDO.gt.0) then
	670	#ifdef ISOTRAC
	671	call iso_verif_traceur(xt1(1,i,k),'cv_driver 601')
	672	#endif
	673	enddo
	674	enddo
	675	#endif
	676
	677
	678	CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na
	679	, tp1, tvp1, clw1, icbs1 &
	680	#ifdef ISO
	681	& ,xt1,xtclw1 &
	682	#endif
	683	& )
	684
	685
	686	#ifdef ISO
	687	!c--debug
	688	#ifdef ISOVERIF
[4368]	689	write(,) 'cv_driver 621: apres cv3_undilute1'
[3927]	690	do k = 1, klev
	691	do i = 1, klon
	692	if (iso_eau.gt.0) then
	693	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
	694	& 'undil1',errmax,errmaxrel)
	695	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
	696	& 'undil1',errmax,errmaxrel)
	697	endif !if (iso_eau.gt.0) then
	698	#ifdef ISOTRAC
	699	call iso_verif_traceur(xt1(1,i,k),'cv_driver 623')
	700	#endif
	701	enddo
	702	enddo
	703	#endif
	704	!write(,) 'SORTIE DE CV3_UNDILUTE1'
	705	#endif
	706
	707	END IF
	708
	709	IF (iflag_con==4) THEN
	710	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, &
	711	tvp1, clw1)
	712	END IF
	713
	714	! -------------------------------------------------------------------
	715	! --- TRIGGERING
	716	! -------------------------------------------------------------------
	717
	718	IF (iflag_con==30) THEN
	719	CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & !
	720	! nd->na
	721	, pbase1, buoybase1, iflag1, sig1, w01)
	722	END IF
	723
	724	IF (iflag_con==4) THEN
	725	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
	726	END IF
	727
	728	! =====================================================================
	729	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
	730	! =====================================================================
	731
	732	ncum = 0
	733	DO i = 1, len
	734	IF (iflag1(i)==0) THEN
	735	ncum = ncum + 1
	736	idcum(ncum) = i
	737	END IF
	738	END DO
	739
	740	! print*,'cv_driver : klon, ncum = ',len,ncum
	741
	742	IF (ncum>0) THEN
	743
	744	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	745	! --- COMPRESS THE FIELDS
	746	! (-> vectorization over convective gridpoints)
	747	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	748
	749	IF (iflag_con==30) THEN
	750	#ifdef ISO
	751	#ifdef ISOVERIF
	752	!write(,) 'xt1(iso_eau,1,1),q1(1,1)=',xt1(iso_eau,1,1),q1(1,1)
	753	!write(,) 'xt1(iso_eau,14,1),q1(14,1)=',xt1(iso_eau,14,1),q1(14,1)
	754	do k = 1, klev
	755	do i = 1, nloc
	756	if (iso_eau.gt.0) then
	757	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
	758	& 'cv_driver 541a',errmax,errmaxrel)
	759	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
	760	& 'cv_driver 541b',errmax,errmaxrel)
	761	endif ! if (iso_eau.gt.0) then
	762	#ifdef ISOTRAC
	763	call iso_verif_traceur(xt1(1,i,k),'cv_driver 689')
	764	#endif
	765	enddo
	766	enddo
	767	#endif
	768	#endif
	769
	770	CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, &
	771	plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, &
	772	gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, &
	773	w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, &
	774	q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, &
	775	w0 &
	776	#ifdef ISO
	777	& ,xtnk1,xt1,xtclw1 &
	778	& ,xtnk,xt,xtclw &
	779	#endif
	780	& )
	781
	782	#ifdef ISO
	783	#ifdef ISOVERIF
[4368]	784	write(,) 'cv_driver 720: apres cv3_compress'
[3927]	785	do k = 1, klev
	786	do i = 1, ncum
	787	if (iso_eau.gt.0) then
	788	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
	789	& 'cv_driver 598',errmax,errmaxrel)
	790	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	791	& 'cv_driver 600',errmax,errmaxrel)
	792	endif ! if (iso_eau.gt.0) then
	793	if (iso_HDO.gt.0) then
	794	call iso_verif_aberrant_choix( &
	795	& xt(iso_HDO,i,k),q(i,k), &
	796	& ridicule,deltalim,'cv_driver 735, apres compress')
	797	endif !if (iso_HDO.gt.0) then
	798	#ifdef ISOTRAC
	799	call iso_verif_traceur(xt(1,i,k),'cv_driver 726')
	800	#endif
	801	enddo
	802	enddo
	803	if (iso_eau.gt.0) then
	804	do i = 1, ncum
	805	call iso_verif_egalite_choix(xtnk(iso_eau,i),qnk(i), &
	806	& 'cv_driver 834',errmax,errmaxrel)
	807	enddo
	808	endif !if (iso_eau.gt.0) then
	809	#endif
	810	#endif
	811
	812	END IF
	813
	814	IF (iflag_con==4) THEN
	815	CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, &
	816	tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, &
	817	tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, &
	818	q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph)
	819	END IF
	820
	821	! -------------------------------------------------------------------
	822	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
	823	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
	824	! --- &
	825	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
	826	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
	827	! --- &
	828	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
	829	! -------------------------------------------------------------------
	830
	831	IF (iflag_con==30) THEN
	832	CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd
	833	, tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, &
	834	inb, tp, tvp, clw, hp, ep, sigp, buoy &
	835	#ifdef ISO
	836	& ,xtnk,xt,xtclw &
	837	#endif
	838	& )
	839
	840	#ifdef ISO
	841	#ifdef ISOVERIF
	842	write(,) 'cv_driver 863: apres call cv30_undilute2'
	843	do k = 1, klev
	844	do i = 1, ncum
	845	if (iso_eau.gt.0) then
	846	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
	847	& 'cv_driver 650',errmax,errmaxrel)
	848	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	849	& 'cv_driver 652',errmax,errmaxrel)
	850	endif ! if (iso_eau.gt.0) then
	851	if (iso_HDO.gt.0) then
	852	call iso_verif_aberrant_choix( &
	853	& xt(iso_HDO,i,k),q(i,k), &
	854	& ridicule,deltalim,'cv_driver 794, apres undilute2')
	855	endif !if (iso_HDO.gt.0) then
	856	#ifdef ISOTRAC
	857	call iso_verif_traceur(xt(1,i,k),'cv_driver 780trac')
	858	call iso_verif_traceur(xtclw(1,i,k),'cv_driver 781trac')
	859	#endif
	860	enddo
	861	enddo
	862	#endif
	863	!write(,) 'SORTIE CV3_UNDILUTE2'
	864	#endif
	865	END IF
	866
	867	IF (iflag_con==4) THEN
	868	CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, &
	869	gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
	870	END IF
	871
	872	! -------------------------------------------------------------------
	873	! --- CLOSURE
	874	! -------------------------------------------------------------------
	875
	876	IF (iflag_con==30) THEN
	877	CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd
	878	, pbase, p, ph, tv, buoy, sig, w0, cape, m)
	879
	880	! epmax_cape
	881	call cv30_epmax_fn_cape(nloc,ncum,nd &
	882	,cape,ep,hp,icb,inb,clw,nk,t,h,lv &
	883	,epmax_diag)
	884	! on écrase ep et recalcule hp
	885	END IF
	886
	887	IF (iflag_con==4) THEN
	888	CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, &
	889	cpn, iflag, cbmf)
	890	END IF
	891
	892
	893	! -------------------------------------------------------------------
	894	! --- MIXING
	895	! -------------------------------------------------------------------
	896
	897	IF (iflag_con==30) THEN
	898	CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & !
	899	! na->nd
	900	, ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, &
	901	ment, qent, uent, vent, sij, elij, ments, qents, traent &
	902	#ifdef ISO
	903	& ,xt,xtnk,xtclw &
	904	& ,xtent,xtelij &
	905	#endif
	906	& )
	907
	908
	909	#ifdef ISO
	910	#ifdef ISOVERIF
[4368]	911	write(,) 'cv_driver 837: apres cv3_mixing'
[3927]	912	do k = 1, klev
	913	do j = 1, klev
	914	do i = 1, ncum
	915	if (iso_eau.gt.0) then
	916	call iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), &
	917	& elij(i,j,k),'cv_driver 881',errmax,errmaxrel)
	918	call iso_verif_egalite_choix(xtent(iso_eau,i,j,k), &
	919	& qent(i,j,k),'cv_driver 882',errmax,errmaxrel)
	920	endif ! if (iso_eau.gt.0) then
	921	#ifdef ISOTRAC
	922	call iso_verif_traceur_justmass(xtent(1,i,j,k), &
	923	& 'cv_driver 846')
	924	call iso_verif_traceur_justmass(xtelij(1,i,j,k), &
	925	& 'cv_driver 847')
[4368]	926	! on ne verifie pas le deltaD ici car peut depasser le seuil
	927	! raisonable pour temperatures tres froides.
[3927]	928	#endif
	929	enddo
	930	enddo
	931	enddo !do k = 1, klev
	932	do k = 1, klev
	933	do i = 1, ncum
	934	if (iso_eau.gt.0) then
	935	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	936	& 'cv_driver 709',errmax,errmaxrel)
	937	endif ! if (iso_eau.gt.0) then
	938	#ifdef ISOTRAC
	939	call iso_verif_traceur(xt(1,i,k),'cv_driver 856')
	940	if (option_tmin.eq.1) then
[4368]	941	if (iso_verif_positif_nostop(xtclw(itZonIso( &
[3927]	942	& izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) &
	943	& ,'cv_driver 909').eq.1) then
	944	write(,) 'i,k=',i,k
	945	write(,) 'xtclw=',xtclw(:,i,k)
	946	stop
[4368]	947	endif !if (iso_verif_positif_nostop(xtclw(itZonIso(
[3927]	948	endif !if ((option_traceurs.eq.17).or.
	949	#endif
	950	enddo
	951	enddo !do k = 1, klev
	952
	953	#endif
	954	#endif
	955
	956	END IF
	957
	958	IF (iflag_con==4) THEN
	959	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, &
	960	h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, &
	961	nent, sij, elij)
	962	END IF
	963
	964	! -------------------------------------------------------------------
	965	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
	966	! -------------------------------------------------------------------
	967
	968	IF (iflag_con==30) THEN
	969
	970	#ifdef ISO
	971	#ifdef ISOVERIF
	972	do k = 1, klev
	973	do i = 1, ncum
	974	if (iso_eau.gt.0) then
	975	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	976	& 'cv_driver 753',errmax,errmaxrel)
	977	endif ! if (iso_eau.gt.0) then
	978	#ifdef ISOTRAC
	979	call iso_verif_traceur(xt(1,i,k),'cv_driver 885')
	980	#endif
	981	enddo
	982	enddo !do k = 1, klev
	983	#endif
	984	#endif
	985
	986	! RomP >>>
	987	CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd
	988	, t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, &
	989	ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, &
	990	wdtraina, wdtrainm &
	991	#ifdef ISO
	992	& ,xt,xtclw,xtelij &
	993	& ,xtp,xtwater,xtevap,xtwdtraina &
	994	#endif
	995	& )
	996	! RomP <<<
	997
	998	#ifdef ISO
	999	write(,) 'klev=',klev
	1000	#ifdef ISOVERIF
[4368]	1001	write(,) 'cv_driver 930: apres cv3_unsat'
[3927]	1002	do k = 1, klev
	1003	do i = 1, ncum
	1004	if (iso_eau.gt.0) then
	1005	! write(,) 'i,k=',i,k
	1006	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
	1007	& 'cv_driver 778',errmax,errmaxrel)
	1008	call iso_verif_egalite_choix(xtp(iso_eau,i,k), &
	1009	& qp(i,k),'cv_driver 780',errmax,errmaxrel)
	1010	call iso_verif_egalite_choix( &
	1011	& xtwater(iso_eau,i,k),water(i,k), &
	1012	& 'cv_driver 782',errmax,errmaxrel)
	1013	call iso_verif_egalite_choix(xtevap(iso_eau,i,k), &
	1014	& evap(i,k),'cv_driver 784',errmax,errmaxrel)
	1015	endif ! if (iso_eau.gt.0) then
	1016	#ifdef ISOTRAC
	1017	call iso_verif_traceur(xt(1,i,k),'cv_driver 939')
	1018	call iso_verif_traceur(xtp(1,i,k),'cv_driver 940')
	1019	call iso_verif_traceur(xtwater(1,i,k),'cv_driver 941')
	1020	call iso_verif_traceur_justmass(xtevap(1,i,k), &
	1021	& 'cv_driver 942')
	1022	if (bidouille_anti_divergence) then
	1023	call iso_verif_traceur_pbidouille( &
	1024	& xtp(1,i,k),'cv_driver 956')
	1025	call iso_verif_traceur_pbidouille( &
	1026	& xtwater(1,i,k),'cv_driver 958')
	1027	endif
	1028	#endif
	1029	enddo !do i = 1, ncum
	1030	enddo !do k = 1, klev
	1031	#endif
	1032	#endif
	1033
	1034	END IF
	1035
	1036	IF (iflag_con==4) THEN
	1037	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, &
	1038	ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap)
	1039	END IF
	1040
	1041
	1042	#ifdef ISO
	1043	#ifdef ISOTRAC
	1044	if (option_traceurs.eq.6) then
	1045	! on colorie les ddfts en rouge, le reste est en blanc.
	1046	do k = 1, klev
	1047	do i = 1, ncum
	1048	do iiso=1,niso
[4368]	1049	ixt_ddft=itZonIso(izone_ddft,iiso)
	1050	ixt_poubelle=itZonIso(izone_poubelle,iiso)
[3927]	1051	xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) &
	1052	& +xtp(ixt_poubelle,i,k)
	1053	xtp(ixt_poubelle,i,k)=0.0
	1054	enddo !do iiso=1,niso
	1055	#ifdef ISOVERIF
	1056	call iso_verif_traceur(xtp(1,i,k),'cv_driver 990')
	1057	#endif
	1058	enddo !do i = 1, ncum
	1059	enddo !do k = 1, klev
	1060	else if (option_traceurs.eq.19) then
	1061	! on colorie les ddfts, mais on sauve la revap
	1062	do k = 1, klev
	1063	do i = 1, ncum
[4368]	1064	do izone=1,nzone
[3927]	1065	if (izone.eq.izone_ddft) then
	1066	do iiso=1,niso
[4368]	1067	ixt_ddft=itZonIso(izone,iiso)
	1068	ixt_revap=itZonIso(izone_revap,iiso)
[3927]	1069	xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k)
	1070	enddo !do iiso=1,niso
	1071	elseif (izone.eq.izone_ddft) then
[4368]	1072	! rien a faire
[3927]	1073	else !if (izone.eq.izone_ddft) then
	1074	do iiso=1,niso
[4368]	1075	ixt=itZonIso(izone,iiso)
[3927]	1076	xtp(ixt,i,k)=0.0
	1077	enddo !do iiso=1,niso
	1078	endif !if (izone.eq.izone_ddft) then
[4368]	1079	enddo !do izone=1,nzone
[3927]	1080	#ifdef ISOVERIF
	1081	call iso_verif_traceur(xtp(1,i,k),'cv_driver 1059')
	1082	#endif
	1083	enddo !do i = 1, ncum
	1084	enddo !do k = 1, klev
	1085	endif !if (option_traceurs.eq.6) then
	1086	#endif
	1087	#endif
	1088
	1089	! -------------------------------------------------------------------
	1090	! --- YIELD
	1091	! (tendencies, precipitation, variables of interface with other
	1092	! processes, etc)
	1093	! -------------------------------------------------------------------
	1094
	1095	IF (iflag_con==30) THEN
	1096	CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd
	1097	, icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, &
	1098	clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, &
	1099	uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, &
	1100	ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, &
	1101	wd &
	1102	#ifdef ISO
	1103	& ,xt,xtclw,xtp,xtwater,xtevap &
	1104	& ,xtent,xtelij,xtprecip,fxt,xtVPrecip &
	1105	#ifdef DIAGISO
	1106	& ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
	1107	& ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
	1108	& ,f_detrainement,q_detrainement,xt_detrainement &
	1109	#endif
	1110	#endif
	1111	& )
	1112
	1113	#ifdef ISOVERIF
	1114	DO k = 1, nd
	1115	DO i = 1, ncum
	1116	if (iso_eau.gt.0) then
	1117	call iso_verif_egalite_choix(fxt(iso_eau,i,k), &
	1118	& fq(i,k),'cv_driver 1086',errmax,errmaxrel)
	1119	endif !if (iso_HDO.gt.0) then
	1120	if (iso_HDO.gt.0) then
	1121	if (q(i,k).gt.ridicule) then
	1122	call iso_verif_aberrant( &
	1123	& (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
	1124	& /(q(i,k)+delt*fq(i,k)),'cv_driver 855')
	1125	endif
	1126	endif
	1127	#ifdef ISOTRAC
	1128	call iso_verif_traceur(xt(1,i,k),'cv_driver 1008')
	1129	#endif
	1130	enddo
	1131	enddo
	1132	#endif
	1133
	1134	END IF
	1135
	1136	IF (iflag_con==4) THEN
	1137	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, &
	1138	ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, &
	1139	evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, &
	1140	tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc)
	1141	END IF
	1142
	1143	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	1144	! --- passive tracers
	1145	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	1146
	1147	IF (iflag_con==30) THEN
	1148	! RomP >>>
	1149	CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, &
	1150	d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb)
	1151	! RomP <<<
	1152	END IF
	1153
	1154	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	1155	! --- UNCOMPRESS THE FIELDS
	1156	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	1157	! set iflag1 =42 for non convective points
	1158	DO i = 1, len
	1159	iflag1(i) = 42
	1160	END DO
	1161
	1162	IF (iflag_con==30) THEN
	1163	CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, &
	1164	vprecip, evap, ep, sig, w0 & !RomP
	1165	, ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, &
	1166	da, phi, mp, phi2, d1a, dam, sij & !RomP
	1167	, elij, clw, epmlmmm, eplamm & !RomP
	1168	, wdtraina, wdtrainm,epmax_diag & !RomP
	1169	, iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP
	1170	, ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, &
	1171	qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP
	1172	, elij1, clw1, epmlmmm1, eplamm1 & !RomP
	1173	, wdtraina1, wdtrainm1,epmax_diag1 & !RomP
	1174	#ifdef ISO
	1175	& ,xtprecip,fxt,xtVPrecip,xtevap,xtclw,xtwdtraina &
	1176	& ,xtprecip1,fxt1,xtVPrecip1,xtevap1,xtclw1,xtwdtraina1 &
	1177	#ifdef DIAGISO
	1178	& , water,xtwater,qp,xtp &
	1179	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
	1180	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip &
	1181	& , f_detrainement,q_detrainement,xt_detrainement &
	1182	& , water1,xtwater1,qp1,xtp1 &
	1183	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
	1184	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
	1185	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
	1186	#endif
	1187	#endif
	1188	& ) !RomP
	1189
	1190	#ifdef ISO
	1191	#ifdef ISOVERIF
	1192	DO k = 1, nd
	1193	DO i = 1, len
	1194	if (iso_eau.gt.0) then
	1195	call iso_verif_egalite_choix(fxt1(iso_eau,i,k), &
	1196	& fq1(i,k),'cv_driver 1170',errmax,errmaxrel)
	1197	endif !if (iso_HDO.gt.0) then
	1198	if (iso_HDO.gt.0) then
	1199	if (q1(i,k).gt.ridicule) then
	1200	call iso_verif_aberrant( &
	1201	& (xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) &
	1202	& /(q1(i,k)+delt*fq1(i,k)),'cv_driver 2554')
	1203	endif
	1204	endif
	1205	enddo !DO i = 1, len
	1206	enddo !DO k = 1, nd
	1207	#ifdef ISOTRAC
	1208	call iso_verif_trac_masse_vect(fxt1,len,nd, &
	1209	& 'cv_driver 1200',errmax,errmaxrel)
	1210	#endif
	1211	#endif
	1212	#endif
	1213
	1214	END IF
	1215
	1216	IF (iflag_con==4) THEN
	1217	CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, &
	1218	fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, &
	1219	ma1, qcondc1)
	1220	END IF
	1221
	1222	END IF ! ncum>0
	1223
	1224	! print *, 'fin cv_driver ->' !jyg
	1225	RETURN
	1226	END SUBROUTINE cv_driver
	1227
	1228	! ==================================================================
	1229	SUBROUTINE cv_flag(iflag_ice_thermo)
	1230
	1231	USE ioipsl_getin_p_mod, ONLY : getin_p
	1232
	1233	IMPLICIT NONE
	1234
	1235	! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if
	1236	! iflag_ice_thermo >=1
	1237	INTEGER iflag_ice_thermo
	1238
	1239	include "cvflag.h"
	1240
	1241	! -- si .TRUE., on rend la gravite plus explicite et eventuellement
	1242	! differente de 10.0 dans convect3:
	1243	cvflag_grav = .TRUE.
	1244	cvflag_ice = iflag_ice_thermo >= 1
	1245	!
	1246	! si icvflag_Tpa=0, alors la fraction de glace dans l'ascendance adiabatique est
	1247	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
[4368]	1248	! calculee en deux iterations, une en supposant qu'il n'y a pas de glace et l'autre
	1249	! en ajoutant la glace (ancien schema d'Arnaud Jam).
[3927]	1250	! si icvflag_Tpa=1, alors la fraction de glace dans l'ascendance adiabatique est
	1251	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
	1252	! calculee en une seule iteration.
	1253	! si icvflag_Tpa=2, alors la fraction de glace dans l'ascendance adiabatique est
	1254	! fonction de la temperature de l'ascendance et la temperature de l'ascendance est
	1255	! calculee en une seule iteration.
	1256	icvflag_Tpa=0
	1257	call getin_p('icvflag_Tpa', icvflag_Tpa)
	1258
	1259	RETURN
	1260	END SUBROUTINE cv_flag
	1261
	1262	! ==================================================================
	1263	SUBROUTINE cv_thermo(iflag_con)
	1264	IMPLICIT NONE
	1265
	1266	! -------------------------------------------------------------
	1267	! Set thermodynamical constants for convectL
	1268	! -------------------------------------------------------------
	1269
	1270	include "YOMCST.h"
	1271	include "cvthermo.h"
	1272
	1273	INTEGER iflag_con
	1274
	1275
	1276	! original set from convect:
	1277	IF (iflag_con==4) THEN
	1278	cpd = 1005.7
	1279	cpv = 1870.0
	1280	cl = 4190.0
	1281	rrv = 461.5
	1282	rrd = 287.04
	1283	lv0 = 2.501E6
	1284	g = 9.8
	1285	t0 = 273.15
	1286	grav = g
	1287	ELSE
	1288
	1289	! constants consistent with LMDZ:
	1290	cpd = rcpd
	1291	cpv = rcpv
	1292	cl = rcw
	1293	ci = rcs
	1294	rrv = rv
	1295	rrd = rd
	1296	lv0 = rlvtt
	1297	lf0 = rlstt - rlvtt
	1298	g = rg ! not used in convect3
	1299	! ori t0 = RTT
	1300	t0 = 273.15 ! convect3 (RTT=273.16)
	1301	! maf grav= 10. ! implicitely or explicitely used in convect3
	1302	grav = g ! implicitely or explicitely used in convect3
	1303	END IF
	1304
	1305	rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?)
	1306
	1307	clmcpv = cl - cpv
	1308	clmcpd = cl - cpd
	1309	clmci = cl - ci
	1310	cpdmcp = cpd - cpv
	1311	cpvmcpd = cpv - cpd
	1312	cpvmcl = cl - cpv ! for convect3
	1313	eps = rrd/rrv
	1314	epsi = 1.0/eps
	1315	epsim1 = epsi - 1.0
	1316	! ginv=1.0/g
	1317	ginv = 1.0/grav
	1318	hrd = 0.5*rrd
	1319
	1320	RETURN
	1321	END SUBROUTINE cv_thermo

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format