Context Navigation

thermcell_main.F90 @ 5434

Last change on this file since 5434 was 4368, checked in by lguez, 2 years ago
Sync latest trunk changes to Ocean_skin
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 29.5 KB

Rev	Line
[4368]	1
[1403]	2	! $Id: thermcell_main.F90 4368 2022-12-05 23:01:16Z fhourdin $
[878]	3	!
[4368]	4	subroutine thermcell_main(itap,ngrid,nlay,ptimestep &
[878]	5	& ,pplay,pplev,pphi,debut &
	6	& ,pu,pv,pt,po &
	7	& ,pduadj,pdvadj,pdtadj,pdoadj &
[1026]	8	& ,fm0,entr0,detr0,zqta,zqla,lmax &
[878]	9	& ,ratqscth,ratqsdiff,zqsatth &
[1403]	10	& ,zmax0, f0,zw2,fraca,ztv &
[4368]	11	& ,zpspsk,ztla,zthl,ztva &
	12	& ,pcon,rhobarz,wth3,wmax_sec,lalim,fm,alim_star,zmax &
	13	#ifdef ISO
	14	& ,xtpo,xtpdoadj &
	15	#endif
	16	& )
[878]	17
[4368]	18
	19	USE thermcell_ini_mod, ONLY: thermcell_ini,dqimpl,dvdq,prt_level,lunout,prt_level
	20	USE thermcell_ini_mod, ONLY: iflag_thermals_closure,iflag_thermals_ed,tau_thermals,r_aspect_thermals
	21	USE thermcell_ini_mod, ONLY: RD,RG
	22
	23	#ifdef ISO
	24	USE infotrac_phy, ONLY : ntiso
	25	#ifdef ISOVERIF
	26	USE isotopes_mod, ONLY : iso_eau,iso_HDO
	27	USE isotopes_verif_mod, ONLY: iso_verif_egalite, &
	28	iso_verif_aberrant_encadre
	29	#endif
	30	#endif
	31
	32
[878]	33	IMPLICIT NONE
	34
	35	!=======================================================================
	36	! Auteurs: Frederic Hourdin, Catherine Rio, Anne Mathieu
	37	! Version du 09.02.07
	38	! Calcul du transport vertical dans la couche limite en presence
	39	! de "thermiques" explicitement representes avec processus nuageux
	40	!
[1403]	41	! Reecriture a partir d'un listing papier a Habas, le 14/02/00
[878]	42	!
[1403]	43	! le thermique est suppose homogene et dissipe par melange avec
	44	! son environnement. la longueur l_mix controle l'efficacite du
	45	! melange
[878]	46	!
[1403]	47	! Le calcul du transport des differentes especes se fait en prenant
[878]	48	! en compte:
	49	! 1. un flux de masse montant
	50	! 2. un flux de masse descendant
	51	! 3. un entrainement
	52	! 4. un detrainement
	53	!
[1738]	54	! Modif 2013/01/04 (FH hourdin@lmd.jussieu.fr)
	55	! Introduction of an implicit computation of vertical advection in
	56	! the environment of thermal plumes in thermcell_dq
	57	! impl = 0 : explicit, 1 : implicit, -1 : old version
	58	! controled by iflag_thermals =
	59	! 15, 16 run with impl=-1 : numerical convergence with NPv3
	60	! 17, 18 run with impl=1 : more stable
	61	! 15 and 17 correspond to the activation of the stratocumulus "bidouille"
	62	!
[4368]	63	! Using
	64	! abort_physic
	65	! iso_verif_aberrant_encadre
	66	! iso_verif_egalite
	67	! test_ltherm
	68	! thermcell_closure
	69	! thermcell_dq
	70	! thermcell_dry
	71	! thermcell_dv2
	72	! thermcell_env
	73	! thermcell_flux2
	74	! thermcell_height
	75	! thermcell_plume
	76	! thermcell_plume_5B
	77	! thermcell_plume_6A
	78	!
[878]	79	!=======================================================================
	80
[1738]	81
[878]	82	!-----------------------------------------------------------------------
	83	! declarations:
	84	! -------------
	85
	86
	87	! arguments:
	88	! ----------
[4368]	89	integer, intent(in) :: itap,ngrid,nlay
	90	real, intent(in) :: ptimestep
	91	real, intent(in), dimension(ngrid,nlay) :: pt,pu,pv,po,pplay,pphi,zpspsk
	92	real, intent(in), dimension(ngrid,nlay+1) :: pplev
	93	integer, intent(out), dimension(ngrid) :: lmax
	94	real, intent(out), dimension(ngrid,nlay) :: pdtadj,pduadj,pdvadj,pdoadj,entr0,detr0
	95	real, intent(out), dimension(ngrid,nlay) :: ztla,zqla,zqta,zqsatth,zthl
	96	real, intent(out), dimension(ngrid,nlay+1) :: fm0,zw2,fraca
	97	real, intent(inout), dimension(ngrid) :: zmax0,f0
	98	real, intent(out), dimension(ngrid,nlay) :: ztva,ztv
	99	logical, intent(in) :: debut
	100	real,intent(out), dimension(ngrid,nlay) :: ratqscth,ratqsdiff
[878]	101
[4368]	102	real, intent(out), dimension(ngrid) :: pcon
	103	real, intent(out), dimension(ngrid,nlay) :: rhobarz,wth3
	104	real, intent(out), dimension(ngrid) :: wmax_sec
	105	integer,intent(out), dimension(ngrid) :: lalim
	106	real, intent(out), dimension(ngrid,nlay+1) :: fm
	107	real, intent(out), dimension(ngrid,nlay) :: alim_star
	108	real, intent(out), dimension(ngrid) :: zmax
[972]	109
[878]	110	! local:
	111	! ------
	112
[1738]	113
[883]	114	integer,save :: igout=1
[987]	115	!$OMP THREADPRIVATE(igout)
[938]	116	integer,save :: lunout1=6
[987]	117	!$OMP THREADPRIVATE(lunout1)
[883]	118	integer,save :: lev_out=10
[987]	119	!$OMP THREADPRIVATE(lev_out)
[878]	120
[4368]	121	real lambda, zf,zf2,var,vardiff,CHI
	122	integer ig,k,l,ierr,ll
[878]	123	logical sorties
[4368]	124	real, dimension(ngrid) :: linter,zmix, zmax_sec
	125	integer,dimension(ngrid) :: lmin,lmix,lmix_bis,nivcon
	126	real, dimension(ngrid,nlay) :: ztva_est
	127	real, dimension(ngrid,nlay) :: deltaz,zlay,zh,zdthladj,zu,zv,zo,zl,zva,zua,zoa
	128	real, dimension(ngrid,nlay) :: zta,zha,q2,wq,wthl,wthv,thetath2,wth2
	129	real, dimension(ngrid,nlay) :: rho,masse
	130	real, dimension(ngrid,nlay+1) :: zw_est,zlev
	131	real, dimension(ngrid) :: wmax,wmax_tmp
	132	real, dimension(ngrid,nlay+1) :: f_star
	133	real, dimension(ngrid,nlay) :: entr,detr,entr_star,detr_star,alim_star_clos
	134	real, dimension(ngrid,nlay) :: zqsat,csc
	135	real, dimension(ngrid) :: zcon,zcon2,alim_star_tot,f
[878]	136
[4368]	137	character (len=20) :: modname='thermcell_main'
	138	character (len=80) :: abort_message
[878]	139
	140
[4368]	141	#ifdef ISO
	142	REAL xtpo(ntiso,ngrid,nlay),xtpdoadj(ntiso,ngrid,nlay)
	143	REAL xtzo(ntiso,ngrid,nlay)
	144	REAL xtpdoadj_tmp(ngrid,nlay)
	145	REAL xtpo_tmp(ngrid,nlay)
	146	REAL xtzo_tmp(ngrid,nlay)
	147	integer ixt
	148	#endif
[878]	149
	150	!
	151
	152	!-----------------------------------------------------------------------
	153	! initialisation:
	154	! ---------------
	155	!
[1943]	156	fm=0. ; entr=0. ; detr=0.
[972]	157
[938]	158	if (prt_level.ge.1) print*,'thermcell_main V4'
[878]	159
	160	sorties=.true.
[4368]	161	IF(ngrid.NE.ngrid) THEN
[878]	162	PRINT*
	163	PRINT*,'STOP dans convadj'
	164	PRINT*,'ngrid =',ngrid
[4368]	165	PRINT*,'ngrid =',ngrid
[878]	166	ENDIF
	167	!
[1403]	168	! write(lunout,*)'WARNING thermcell_main f0=max(f0,1.e-2)'
[4368]	169	do ig=1,ngrid
[972]	170	f0(ig)=max(f0(ig),1.e-2)
[1403]	171	zmax0(ig)=max(zmax0(ig),40.)
[972]	172	!IMmarche pas ?! if (f0(ig)<1.e-2) f0(ig)=1.e-2
	173	enddo
[878]	174
[1494]	175	if (prt_level.ge.20) then
	176	do ig=1,ngrid
	177	print*,'th_main ig f0',ig,f0(ig)
	178	enddo
	179	endif
[878]	180	!-----------------------------------------------------------------------
	181	! Calcul de T,q,ql a partir de Tl et qT dans l environnement
	182	! --------------------------------------------------------------------
	183	!
	184	CALL thermcell_env(ngrid,nlay,po,pt,pu,pv,pplay, &
	185	& pplev,zo,zh,zl,ztv,zthl,zu,zv,zpspsk,zqsat,lev_out)
	186
[938]	187	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_env'
[878]	188
	189	!------------------------------------------------------------------------
	190	! --------------------
	191	!
	192	!
	193	! + + + + + + + + + + +
	194	!
	195	!
	196	! wa, fraca, wd, fracd -------------------- zlev(2), rhobarz
	197	! wh,wt,wo ...
	198	!
	199	! + + + + + + + + + + + zh,zu,zv,zo,rho
	200	!
	201	!
	202	! -------------------- zlev(1)
	203	! \\\\\\\\\\\\\\\\\\\\
	204	!
	205	!
	206
	207	!-----------------------------------------------------------------------
	208	! Calcul des altitudes des couches
	209	!-----------------------------------------------------------------------
	210
	211	do l=2,nlay
	212	zlev(:,l)=0.5*(pphi(:,l)+pphi(:,l-1))/RG
	213	enddo
[4368]	214	zlev(:,1)=0.
	215	zlev(:,nlay+1)=(2.*pphi(:,nlay)-pphi(:,nlay-1))/RG
[878]	216	do l=1,nlay
	217	zlay(:,l)=pphi(:,l)/RG
	218	enddo
	219	do l=1,nlay
	220	deltaz(:,l)=zlev(:,l+1)-zlev(:,l)
	221	enddo
	222
	223	!-----------------------------------------------------------------------
[4368]	224	! Calcul des densites et masses
[878]	225	!-----------------------------------------------------------------------
	226
[4368]	227	rho(:,:)=pplay(:,:)/(zpspsk(:,:)RDztv(:,:))
	228	if (prt_level.ge.10) write(lunout,*) 'WARNING thermcell_main rhobarz(:,1)=rho(:,1)'
[972]	229	rhobarz(:,1)=rho(:,1)
[878]	230	do l=2,nlay
	231	rhobarz(:,l)=0.5*(rho(:,l)+rho(:,l-1))
	232	enddo
	233	do l=1,nlay
	234	masse(:,l)=(pplev(:,l)-pplev(:,l+1))/RG
	235	enddo
[938]	236	if (prt_level.ge.1) print*,'thermcell_main apres initialisation'
[878]	237
	238	!------------------------------------------------------------------
	239	!
	240	! /\|\
	241	! -------- \| F_k+1 -------
	242	! ----> D_k
	243	! /\|\ <---- E_k , A_k
	244	! -------- \| F_k ---------
	245	! ----> D_k-1
	246	! <---- E_k-1 , A_k-1
	247	!
	248	!
	249	!
	250	!
	251	!
	252	! ---------------------------
	253	!
	254	! ----- F_lmax+1=0 ---------- \
	255	! lmax (zmax) \|
	256	! --------------------------- \|
	257	! \|
	258	! --------------------------- \|
	259	! \|
	260	! --------------------------- \|
	261	! \|
	262	! --------------------------- \|
	263	! \|
	264	! --------------------------- \|
	265	! \| E
	266	! --------------------------- \| D
	267	! \|
	268	! --------------------------- \|
	269	! \|
	270	! --------------------------- \ \|
	271	! lalim \| \|
	272	! --------------------------- \| \|
	273	! \| \|
	274	! --------------------------- \| \|
	275	! \| A \|
	276	! --------------------------- \| \|
	277	! \| \|
	278	! --------------------------- \| \|
	279	! lmin (=1 pour le moment) \| \|
	280	! ----- F_lmin=0 ------------ / /
	281	!
	282	! ---------------------------
	283	! //////////////////////////
	284	!
	285	!
	286	!=============================================================================
	287	! Calculs initiaux ne faisant pas intervenir les changements de phase
	288	!=============================================================================
	289
	290	!------------------------------------------------------------------
[1403]	291	! 1. alim_star est le profil vertical de l'alimentation a la base du
	292	! panache thermique, calcule a partir de la flotabilite de l'air sec
[878]	293	! 2. lmin et lalim sont les indices inferieurs et superieurs de alim_star
	294	!------------------------------------------------------------------
	295	!
	296	entr_star=0. ; detr_star=0. ; alim_star=0. ; alim_star_tot=0.
[1403]	297	lmin=1
[878]	298
	299	!-----------------------------------------------------------------------------
	300	! 3. wmax_sec et zmax_sec sont les vitesses et altitudes maximum d'un
	301	! panache sec conservatif (e=d=0) alimente selon alim_star
	302	! Il s'agit d'un calcul de type CAPE
[1403]	303	! zmax_sec est utilise pour determiner la geometrie du thermique.
[878]	304	!------------------------------------------------------------------------------
[1403]	305	!---------------------------------------------------------------------------------
	306	!calcul du melange et des variables dans le thermique
	307	!--------------------------------------------------------------------------------
[878]	308	!
[1403]	309	if (prt_level.ge.1) print*,'avant thermcell_plume ',lev_out
[878]	310
[3605]	311	!=====================================================================
	312	! Old version of thermcell_plume in thermcell_plume_6A.F90
	313	! It includes both thermcell_plume_6A and thermcell_plume_5B corresponding
	314	! to the 5B and 6A versions used for CMIP5 and CMIP6.
	315	! The latest was previously named thermcellV1_plume.
	316	! The new thermcell_plume is a clean version (removing obsolete
	317	! options) of thermcell_plume_6A.
	318	! The 3 versions are controled by
	319	! flag_thermals_ed <= 9 thermcell_plume_6A
	320	! <= 19 thermcell_plume_5B
	321	! else thermcell_plume (default 20 for convergence with 6A)
	322	! Fredho
	323	!=====================================================================
[878]	324
[1403]	325	if (iflag_thermals_ed<=9) then
	326	! print*,'THERM NOUVELLE/NOUVELLE Arnaud'
[3605]	327	CALL thermcell_plume_6A(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
[1403]	328	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	329	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	330	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	331	& ,lev_out,lunout1,igout)
[878]	332
[3605]	333	elseif (iflag_thermals_ed<=19) then
[1403]	334	! print*,'THERM RIO et al 2010, version d Arnaud'
[3605]	335	CALL thermcell_plume_5B(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
[1403]	336	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	337	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	338	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	339	& ,lev_out,lunout1,igout)
[3605]	340	else
	341	CALL thermcell_plume(itap,ngrid,nlay,ptimestep,ztv,zthl,po,zl,rhobarz,&
	342	& zlev,pplev,pphi,zpspsk,alim_star,alim_star_tot, &
	343	& lalim,f0,detr_star,entr_star,f_star,csc,ztva, &
	344	& ztla,zqla,zqta,zha,zw2,zw_est,ztva_est,zqsatth,lmix,lmix_bis,linter &
	345	& ,lev_out,lunout1,igout)
[1403]	346	endif
[878]	347
[972]	348	if (prt_level.ge.1) print*,'apres thermcell_plume ',lev_out
	349
[4368]	350	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_plum lalim ')
	351	call test_ltherm(ngrid,nlay,pplay,lmix ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_plum lmix ')
[878]	352
[938]	353	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_plume'
	354	if (prt_level.ge.10) then
[972]	355	write(lunout1,*) 'Dans thermcell_main 2'
	356	write(lunout1,*) 'lmin ',lmin(igout)
	357	write(lunout1,*) 'lalim ',lalim(igout)
	358	write(lunout1,*) ' ig l alim_star entr_star detr_star f_star '
	359	write(lunout1,'(i6,i4,4e15.5)') (igout,l,alim_star(igout,l),entr_star(igout,l),detr_star(igout,l) &
[878]	360	& ,f_star(igout,l+1),l=1,nint(linter(igout))+5)
	361	endif
	362
	363	!-------------------------------------------------------------------------------
	364	! Calcul des caracteristiques du thermique:zmax,zmix,wmax
	365	!-------------------------------------------------------------------------------
	366	!
	367	CALL thermcell_height(ngrid,nlay,lalim,lmin,linter,lmix,zw2, &
[4368]	368	& zlev,lmax,zmax,zmax0,zmix,wmax)
[1403]	369	! Attention, w2 est transforme en sa racine carree dans cette routine
[4368]	370	! Le probleme vient du fait que linter et lmix sont souvent egaux a 1.
[1403]	371	wmax_tmp=0.
	372	do l=1,nlay
	373	wmax_tmp(:)=max(wmax_tmp(:),zw2(:,l))
	374	enddo
	375	! print*,"ZMAX ",lalim,lmin,linter,lmix,lmax,zmax,zmax0,zmix,wmax
[878]	376
	377
[1403]	378
[4368]	379	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lalim ')
	380	call test_ltherm(ngrid,nlay,pplay,lmin ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmin ')
	381	call test_ltherm(ngrid,nlay,pplay,lmix ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmix ')
	382	call test_ltherm(ngrid,nlay,pplay,lmax ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_heig lmax ')
[878]	383
[938]	384	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_height'
[878]	385
	386	!-------------------------------------------------------------------------------
	387	! Fermeture,determination de f
	388	!-------------------------------------------------------------------------------
[1026]	389	!
[1403]	390	!
	391	CALL thermcell_dry(ngrid,nlay,zlev,pphi,ztv,alim_star, &
[4368]	392	& lalim,lmin,zmax_sec,wmax_sec)
[878]	393
[1998]	394
[4368]	395	call test_ltherm(ngrid,nlay,pplay,lmin,ztv,po,ztva,zqla,f_star,zw2,'thermcell_dry lmin ')
	396	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_dry lalim ')
[1403]	397
	398	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_dry'
	399	if (prt_level.ge.10) then
	400	write(lunout1,*) 'Dans thermcell_main 1b'
	401	write(lunout1,*) 'lmin ',lmin(igout)
	402	write(lunout1,*) 'lalim ',lalim(igout)
	403	write(lunout1,*) ' ig l alim_star entr_star detr_star f_star '
	404	write(lunout1,'(i6,i4,e15.5)') (igout,l,alim_star(igout,l) &
	405	& ,l=1,lalim(igout)+4)
	406	endif
	407
	408
	409
	410
	411	! Choix de la fonction d'alimentation utilisee pour la fermeture.
	412	! Apparemment sans importance
	413	alim_star_clos(:,:)=alim_star(:,:)
	414	alim_star_clos(:,:)=entr_star(:,:)+alim_star(:,:)
[1998]	415	!
	416	!CR Appel de la fermeture seche
	417	if (iflag_thermals_closure.eq.1) then
[1403]	418
[4368]	419	CALL thermcell_closure(ngrid,nlay,r_aspect_thermals,ptimestep,rho, &
	420	& zlev,lalim,alim_star_clos,zmax_sec,wmax_sec,f)
[878]	421
[1403]	422	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	423	! Appel avec les zmax et wmax tenant compte de la condensation
	424	! Semble moins bien marcher
[1998]	425	else if (iflag_thermals_closure.eq.2) then
	426
	427	CALL thermcell_closure(ngrid,nlay,r_aspect_thermals,ptimestep,rho, &
[4368]	428	& zlev,lalim,alim_star,zmax,wmax,f)
[1998]	429
[4368]	430
[1998]	431	endif
	432
[1403]	433	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	434
[938]	435	if(prt_level.ge.1)print*,'thermcell_closure apres thermcell_closure'
[878]	436
[972]	437	if (tau_thermals>1.) then
	438	lambda=exp(-ptimestep/tau_thermals)
	439	f0=(1.-lambda)f+lambdaf0
	440	else
	441	f0=f
	442	endif
	443
	444	! Test valable seulement en 1D mais pas genant
	445	if (.not. (f0(1).ge.0.) ) then
[1403]	446	abort_message = '.not. (f0(1).ge.0.)'
[2311]	447	CALL abort_physic (modname,abort_message,1)
[972]	448	endif
	449
[878]	450	!-------------------------------------------------------------------------------
	451	!deduction des flux
	452
[972]	453	CALL thermcell_flux2(ngrid,nlay,ptimestep,masse, &
[878]	454	& lalim,lmax,alim_star, &
	455	& entr_star,detr_star,f,rhobarz,zlev,zw2,fm,entr, &
[972]	456	& detr,zqla,lev_out,lunout1,igout)
[4368]	457
	458	#undef DevThermcellDown
	459	#ifdef DevThermcellDown
	460	print*,'WARNING !!! routine thermcell_down en cours de developpement'
	461	CALL thermcell_down(ngrid,nlay,po,pt,pu,pv,pplay,pplev, &
	462	& lmax,fm,entr,detr,zthl)
	463
	464	#endif
	465
[972]	466	!IM 060508 & detr,zqla,zmax,lev_out,lunout,igout)
[878]	467
[938]	468	if (prt_level.ge.1) print*,'thermcell_main apres thermcell_flux'
[4368]	469	call test_ltherm(ngrid,nlay,pplay,lalim,ztv,po,ztva,zqla,f_star,zw2,'thermcell_flux lalim ')
	470	call test_ltherm(ngrid,nlay,pplay,lmax ,ztv,po,ztva,zqla,f_star,zw2,'thermcell_flux lmax ')
[878]	471
	472	!------------------------------------------------------------------
[972]	473	! On ne prend pas directement les profils issus des calculs precedents
	474	! mais on s'autorise genereusement une relaxation vers ceci avec
	475	! une constante de temps tau_thermals (typiquement 1800s).
	476	!------------------------------------------------------------------
[878]	477
[972]	478	if (tau_thermals>1.) then
	479	lambda=exp(-ptimestep/tau_thermals)
	480	fm0=(1.-lambda)fm+lambdafm0
	481	entr0=(1.-lambda)entr+lambdaentr0
[1403]	482	detr0=(1.-lambda)detr+lambdadetr0
[878]	483	else
	484	fm0=fm
	485	entr0=entr
	486	detr0=detr
	487	endif
	488
[972]	489	!c------------------------------------------------------------------
	490	! calcul du transport vertical
	491	!------------------------------------------------------------------
	492
[1738]	493	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
[878]	494	& zthl,zdthladj,zta,lev_out)
[1738]	495	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
[878]	496	& po,pdoadj,zoa,lev_out)
	497
[4368]	498	#ifdef ISO
	499	! C Risi: on utilise directement la meme routine
	500	do ixt=1,ntiso
	501	do ll=1,nlay
	502	DO ig=1,ngrid
	503	xtpo_tmp(ig,ll)=xtpo(ixt,ig,ll)
	504	xtzo_tmp(ig,ll)=xtzo(ixt,ig,ll)
	505	enddo
	506	enddo
	507	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse, &
	508	& xtpo_tmp,xtpdoadj_tmp,xtzo_tmp,lev_out)
	509	do ll=1,nlay
	510	DO ig=1,ngrid
	511	xtpdoadj(ixt,ig,ll)=xtpdoadj_tmp(ig,ll)
	512	enddo
	513	enddo
	514	enddo
	515	#endif
	516
	517	#ifdef ISO
	518	#ifdef ISOVERIF
	519	DO ll=1,nlay
	520	DO ig=1,ngrid
	521	if (iso_eau.gt.0) then
	522	call iso_verif_egalite(xtpo(iso_eau,ig,ll), &
	523	& po(ig,ll),'thermcell_main 594')
	524	call iso_verif_egalite(xtpdoadj(iso_eau,ig,ll), &
	525	& pdoadj(ig,ll),'thermcell_main 596')
	526	endif
	527	if (iso_HDO.gt.0) then
	528	call iso_verif_aberrant_encadre(xtpo(iso_hdo,ig,ll) &
	529	& /po(ig,ll),'thermcell_main 610')
	530	endif
	531	enddo
	532	enddo !DO ll=1,nlay
	533	write(,) 'thermcell_main 600 tmp: apres thermcell_dq'
	534	#endif
	535	#endif
	536
	537
	538
[883]	539	!------------------------------------------------------------------
	540	! Calcul de la fraction de l'ascendance
	541	!------------------------------------------------------------------
[4368]	542	do ig=1,ngrid
[883]	543	fraca(ig,1)=0.
	544	fraca(ig,nlay+1)=0.
	545	enddo
	546	do l=2,nlay
[4368]	547	do ig=1,ngrid
[883]	548	if (zw2(ig,l).gt.1.e-10) then
	549	fraca(ig,l)=fm(ig,l)/(rhobarz(ig,l)*zw2(ig,l))
	550	else
	551	fraca(ig,l)=0.
	552	endif
	553	enddo
	554	enddo
	555
	556	!------------------------------------------------------------------
	557	! calcul du transport vertical du moment horizontal
	558	!------------------------------------------------------------------
[878]	559
[972]	560	!IM 090508
[1738]	561	if (dvdq == 0 ) then
[883]	562
[878]	563	! Calcul du transport de V tenant compte d'echange par gradient
	564	! de pression horizontal avec l'environnement
	565
	566	call thermcell_dv2(ngrid,nlay,ptimestep,fm0,entr0,masse &
[1738]	567	! & ,fraca*dvdq,zmax &
	568	& ,fraca,zmax &
[972]	569	& ,zu,zv,pduadj,pdvadj,zua,zva,lev_out)
[1403]	570
[878]	571	else
	572
	573	! calcul purement conservatif pour le transport de V
[1738]	574	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse &
[878]	575	& ,zu,pduadj,zua,lev_out)
[1738]	576	call thermcell_dq(ngrid,nlay,dqimpl,ptimestep,fm0,entr0,masse &
[878]	577	& ,zv,pdvadj,zva,lev_out)
[1738]	578
[878]	579	endif
	580
	581	! print*,'13 OK convect8'
	582	do l=1,nlay
	583	do ig=1,ngrid
	584	pdtadj(ig,l)=zdthladj(ig,l)*zpspsk(ig,l)
	585	enddo
	586	enddo
	587
[972]	588	if (prt_level.ge.1) print*,'14 OK convect8'
[878]	589	!------------------------------------------------------------------
	590	! Calculs de diagnostiques pour les sorties
	591	!------------------------------------------------------------------
	592	!calcul de fraca pour les sorties
	593
	594	if (sorties) then
[972]	595	if (prt_level.ge.1) print*,'14a OK convect8'
[878]	596	! calcul du niveau de condensation
	597	! initialisation
	598	do ig=1,ngrid
[879]	599	nivcon(ig)=0
[878]	600	zcon(ig)=0.
	601	enddo
	602	!nouveau calcul
	603	do ig=1,ngrid
	604	CHI=zh(ig,1)/(1669.0-122.0*zo(ig,1)/zqsat(ig,1)-zh(ig,1))
	605	pcon(ig)=pplay(ig,1)(zo(ig,1)/zqsat(ig,1))*CHI
	606	enddo
[1403]	607	!IM do k=1,nlay
	608	do k=1,nlay-1
[878]	609	do ig=1,ngrid
	610	if ((pcon(ig).le.pplay(ig,k)) &
	611	& .and.(pcon(ig).gt.pplay(ig,k+1))) then
	612	zcon2(ig)=zlay(ig,k)-(pcon(ig)-pplay(ig,k))/(RG*rho(ig,k))/100.
	613	endif
	614	enddo
	615	enddo
[1403]	616	!IM
[1494]	617	ierr=0
[1403]	618	do ig=1,ngrid
	619	if (pcon(ig).le.pplay(ig,nlay)) then
	620	zcon2(ig)=zlay(ig,nlay)-(pcon(ig)-pplay(ig,nlay))/(RG*rho(ig,nlay))/100.
[1494]	621	ierr=1
	622	endif
	623	enddo
	624	if (ierr==1) then
[1403]	625	abort_message = 'thermcellV0_main: les thermiques vont trop haut '
[2311]	626	CALL abort_physic (modname,abort_message,1)
[1494]	627	endif
	628
[972]	629	if (prt_level.ge.1) print*,'14b OK convect8'
[878]	630	do k=nlay,1,-1
	631	do ig=1,ngrid
	632	if (zqla(ig,k).gt.1e-10) then
	633	nivcon(ig)=k
	634	zcon(ig)=zlev(ig,k)
	635	endif
	636	enddo
	637	enddo
[972]	638	if (prt_level.ge.1) print*,'14c OK convect8'
[878]	639	!calcul des moments
	640	!initialisation
	641	do l=1,nlay
	642	do ig=1,ngrid
	643	q2(ig,l)=0.
	644	wth2(ig,l)=0.
	645	wth3(ig,l)=0.
	646	ratqscth(ig,l)=0.
	647	ratqsdiff(ig,l)=0.
	648	enddo
	649	enddo
[972]	650	if (prt_level.ge.1) print*,'14d OK convect8'
[1146]	651	if (prt_level.ge.10)write(lunout,*) &
	652	& 'WARNING thermcell_main wth2=0. si zw2 > 1.e-10'
[878]	653	do l=1,nlay
	654	do ig=1,ngrid
	655	zf=fraca(ig,l)
	656	zf2=zf/(1.-zf)
[972]	657	!
[1403]	658	thetath2(ig,l)=zf2(ztla(ig,l)-zthl(ig,l))*2
[972]	659	if(zw2(ig,l).gt.1.e-10) then
	660	wth2(ig,l)=zf2(zw2(ig,l))*2
	661	else
	662	wth2(ig,l)=0.
	663	endif
[878]	664	wth3(ig,l)=zf2(1-2.fraca(ig,l))/(1-fraca(ig,l)) &
	665	& zw2(ig,l)zw2(ig,l)*zw2(ig,l)
	666	q2(ig,l)=zf2(zqta(ig,l)1000.-po(ig,l)1000.)*2
	667	!test: on calcul q2/po=ratqsc
	668	ratqscth(ig,l)=sqrt(max(q2(ig,l),1.e-6)/(po(ig,l)*1000.))
	669	enddo
	670	enddo
[1403]	671	!calcul des flux: q, thetal et thetav
	672	do l=1,nlay
	673	do ig=1,ngrid
	674	wq(ig,l)=fraca(ig,l)zw2(ig,l)(zqta(ig,l)1000.-po(ig,l)1000.)
	675	wthl(ig,l)=fraca(ig,l)zw2(ig,l)(ztla(ig,l)-zthl(ig,l))
	676	wthv(ig,l)=fraca(ig,l)zw2(ig,l)(ztva(ig,l)-ztv(ig,l))
	677	enddo
[879]	678	enddo
[1638]	679
[878]	680	!calcul du ratqscdiff
[972]	681	if (prt_level.ge.1) print*,'14e OK convect8'
[878]	682	var=0.
	683	vardiff=0.
	684	ratqsdiff(:,:)=0.
[1494]	685
[4368]	686	do l=1,nlay
[1494]	687	do ig=1,ngrid
	688	if (l<=lalim(ig)) then
[878]	689	var=var+alim_star(ig,l)zqta(ig,l)1000.
[1494]	690	endif
[878]	691	enddo
	692	enddo
[1494]	693
[972]	694	if (prt_level.ge.1) print*,'14f OK convect8'
[1494]	695
[4368]	696	do l=1,nlay
[1494]	697	do ig=1,ngrid
	698	if (l<=lalim(ig)) then
	699	zf=fraca(ig,l)
	700	zf2=zf/(1.-zf)
	701	vardiff=vardiff+alim_star(ig,l)(zqta(ig,l)1000.-var)**2
	702	endif
	703	enddo
[878]	704	enddo
[1494]	705
[972]	706	if (prt_level.ge.1) print*,'14g OK convect8'
[4368]	707	do l=1,nlay
	708	do ig=1,ngrid
	709	ratqsdiff(ig,l)=sqrt(vardiff)/(po(ig,l)*1000.)
	710	enddo
	711	enddo
[878]	712	endif
	713
[938]	714	if (prt_level.ge.1) print*,'thermcell_main FIN OK'
[878]	715
[4368]	716	RETURN
	717	end subroutine thermcell_main
[878]	718
[4368]	719	!=============================================================================
	720	!/////////////////////////////////////////////////////////////////////////////
	721	!=============================================================================
	722	subroutine test_ltherm(ngrid,nlay,pplay,long,ztv,po,ztva, & ! in
	723	& zqla,f_star,zw2,comment) ! in
	724	!=============================================================================
	725	USE thermcell_ini_mod, ONLY: prt_level
[938]	726	IMPLICIT NONE
[878]	727
[4368]	728	integer i, k, ngrid,nlay
	729	real, intent(in), dimension(ngrid,nlay) :: pplay,ztv,po,ztva,zqla
	730	real, intent(in), dimension(ngrid,nlay) :: f_star,zw2
	731	integer, intent(in), dimension(ngrid) :: long
[878]	732	real seuil
	733	character*21 comment
	734
[4368]	735	seuil=0.25
	736
[938]	737	if (prt_level.ge.1) THEN
	738	print*,'WARNING !!! TEST ',comment
	739	endif
[879]	740	return
	741
[878]	742	! test sur la hauteur des thermiques ...
[4368]	743	do i=1,ngrid
[972]	744	!IMtemp if (pplay(i,long(i)).lt.seuil*pplev(i,1)) then
	745	if (prt_level.ge.10) then
[878]	746	print*,'WARNING ',comment,' au point ',i,' K= ',long(i)
	747	print,' K P(MB) THV(K) Qenv(g/kg)THVA QLA(g/kg) F W2'
[4368]	748	do k=1,nlay
[878]	749	write(6,'(i3,7f10.3)') k,pplay(i,k),ztv(i,k),1000po(i,k),ztva(i,k),1000zqla(i,k),f_star(i,k),zw2(i,k)
	750	enddo
[972]	751	endif
[878]	752	enddo
	753
	754
	755	return
	756	end
	757
[4368]	758	! nrlmd le 10/04/2012 Transport de la TKE par le thermique moyen pour la fermeture en ALP
	759	! On transporte pbl_tke pour donner therm_tke
	760	! Copie conforme de la subroutine DTKE dans physiq.F ecrite par Frederic Hourdin
	761
	762	!=======================================================================
	763	!///////////////////////////////////////////////////////////////////////
	764	!=======================================================================
	765
	766	subroutine thermcell_tke_transport( &
	767	& ngrid,nlay,ptimestep,fm0,entr0,rg,pplev, & ! in
	768	& therm_tke_max) ! out
	769	USE thermcell_ini_mod, ONLY: prt_level
[1638]	770	implicit none
	771
	772	!=======================================================================
	773	!
	774	! Calcul du transport verticale dans la couche limite en presence
	775	! de "thermiques" explicitement representes
	776	! calcul du dq/dt une fois qu'on connait les ascendances
	777	!
	778	!=======================================================================
	779
[4368]	780	integer ngrid,nlay
[1638]	781
[4368]	782	real, intent(in) :: ptimestep
	783	real, intent(in), dimension(ngrid,nlay+1) :: fm0,pplev
	784	real, intent(in), dimension(ngrid,nlay) :: entr0
	785	real, intent(in) :: rg
	786	real, intent(out), dimension(ngrid,nlay) :: therm_tke_max
	787
[1638]	788	real detr0(ngrid,nlay)
[4368]	789	real masse0(ngrid,nlay)
[1638]	790	real masse(ngrid,nlay),fm(ngrid,nlay+1)
	791	real entr(ngrid,nlay)
	792	real q(ngrid,nlay)
	793	integer lev_out ! niveau pour les print
	794
	795	real qa(ngrid,nlay),detr(ngrid,nlay),wqd(ngrid,nlay+1)
	796	integer ig,k
	797
	798
	799	lev_out=0
	800
	801
	802	if (prt_level.ge.1) print*,'Q2 THERMCEL_DQ 0'
	803
	804	! calcul du detrainement
	805	do k=1,nlay
	806	detr0(:,k)=fm0(:,k)-fm0(:,k+1)+entr0(:,k)
	807	masse0(:,k)=(pplev(:,k)-pplev(:,k+1))/RG
	808	enddo
	809
	810
	811	! Decalage vertical des entrainements et detrainements.
	812	masse(:,1)=0.5*masse0(:,1)
	813	entr(:,1)=0.5*entr0(:,1)
	814	detr(:,1)=0.5*detr0(:,1)
	815	fm(:,1)=0.
	816	do k=1,nlay-1
	817	masse(:,k+1)=0.5*(masse0(:,k)+masse0(:,k+1))
	818	entr(:,k+1)=0.5*(entr0(:,k)+entr0(:,k+1))
	819	detr(:,k+1)=0.5*(detr0(:,k)+detr0(:,k+1))
	820	fm(:,k+1)=fm(:,k)+entr(:,k)-detr(:,k)
	821	enddo
	822	fm(:,nlay+1)=0.
	823
	824
	825	q(:,:)=therm_tke_max(:,:)
	826	!!! nrlmd le 16/09/2010
	827	do ig=1,ngrid
	828	qa(ig,1)=q(ig,1)
	829	enddo
	830	!!!
	831
	832	if (1==1) then
	833	do k=2,nlay
	834	do ig=1,ngrid
	835	if ((fm(ig,k+1)+detr(ig,k))*ptimestep.gt. &
	836	& 1.e-5*masse(ig,k)) then
	837	qa(ig,k)=(fm(ig,k)qa(ig,k-1)+entr(ig,k)q(ig,k)) &
	838	& /(fm(ig,k+1)+detr(ig,k))
	839	else
	840	qa(ig,k)=q(ig,k)
	841	endif
	842	if (qa(ig,k).lt.0.) then
	843	! print*,'qa<0!!!'
	844	endif
	845	if (q(ig,k).lt.0.) then
	846	! print*,'q<0!!!'
	847	endif
	848	enddo
	849	enddo
	850
	851	! Calcul du flux subsident
	852
	853	do k=2,nlay
	854	do ig=1,ngrid
	855	wqd(ig,k)=fm(ig,k)*q(ig,k)
	856	if (wqd(ig,k).lt.0.) then
	857	! print*,'wqd<0!!!'
	858	endif
	859	enddo
	860	enddo
	861	do ig=1,ngrid
	862	wqd(ig,1)=0.
	863	wqd(ig,nlay+1)=0.
	864	enddo
	865
	866	! Calcul des tendances
	867	do k=1,nlay
	868	do ig=1,ngrid
	869	q(ig,k)=q(ig,k)+(detr(ig,k)qa(ig,k)-entr(ig,k)q(ig,k) &
	870	& -wqd(ig,k)+wqd(ig,k+1)) &
	871	& *ptimestep/masse(ig,k)
	872	enddo
	873	enddo
	874
	875	endif
	876
	877	therm_tke_max(:,:)=q(:,:)
	878
	879	return
	880	!!! fin nrlmd le 10/04/2012
	881	end
	882

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format