Context Navigation

infotrac.F90 @ 3811

Last change on this file since 3811 was 3811, checked in by lguez, 4 years ago
Sync latest trunk changes to Ocean_skin
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:keywords set to `Id`
File size: 34.7 KB

Rev	Line
[1279]	1	! $Id: infotrac.F90 3811 2021-01-28 15:02:09Z lguez $
	2	!
[1114]	3	MODULE infotrac
	4
	5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
	6	INTEGER, SAVE :: nqtot
[2086]	7	!CR: on ajoute le nombre de traceurs de l eau
	8	INTEGER, SAVE :: nqo
[1114]	9
	10	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
	11	! number of tracers used in the physics
	12	INTEGER, SAVE :: nbtr
	13
[2270]	14	! CRisi: nb traceurs pères= directement advectés par l'air
	15	INTEGER, SAVE :: nqperes
	16
[1114]	17	! Name variables
	18	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
	19	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
	20
	21	! iadv : index of trasport schema for each tracer
	22	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
	23
	24	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
	25	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
	26	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
	27
[2270]	28	! CRisi: tableaux de fils
	29	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqfils
	30	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqdesc ! nombres de fils + nombre de tous les petits fils sur toutes les générations
	31	INTEGER, SAVE :: nqdesc_tot
	32	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqfils
	33	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iqpere
[3811]	34	REAL :: qperemin,masseqmin,ratiomin ! MVals et CRisi
	35	PARAMETER (qperemin=1e-16,masseqmin=1e-16,ratiomin=1e-16) ! MVals
[2270]	36
[1279]	37	! conv_flg(it)=0 : convection desactivated for tracer number it
[1114]	38	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
[1279]	39	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
[1114]	40	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
	41
[1279]	42	CHARACTER(len=4),SAVE :: type_trac
[2180]	43	CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym
[2270]	44
[2690]	45	! CRisi: cas particulier des isotopes
	46	LOGICAL,SAVE :: ok_isotopes,ok_iso_verif,ok_isotrac,ok_init_iso
	47	INTEGER :: niso_possibles
	48	PARAMETER ( niso_possibles=5)
	49	REAL, DIMENSION (niso_possibles),SAVE :: tnat,alpha_ideal
	50	LOGICAL, DIMENSION(niso_possibles),SAVE :: use_iso
	51	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqiso ! donne indice iq en fn de (ixt,phase)
	52	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_num ! donne numéro iso entre 1 et niso_possibles en fn de nqtot
	53	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_indnum ! donne numéro iso entre 1 et niso effectif en fn de nqtot
	54	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: zone_num ! donne numéro de la zone de tracage en fn de nqtot
	55	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: phase_num ! donne numéro de la zone de tracage en fn de nqtot
	56	INTEGER, DIMENSION(niso_possibles), SAVE :: indnum_fn_num ! donne indice entre entre 1 et niso en fonction du numéro d isotope entre 1 et niso_possibles
	57	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: index_trac ! numéro ixt en fn izone, indnum entre 1 et niso
	58	INTEGER,SAVE :: niso,ntraceurs_zone,ntraciso
	59
	60	#ifdef CPP_StratAer
	61	!--CK/OB for stratospheric aerosols
	62	INTEGER, SAVE :: nbtr_bin
	63	INTEGER, SAVE :: nbtr_sulgas
	64	INTEGER, SAVE :: id_OCS_strat
	65	INTEGER, SAVE :: id_SO2_strat
	66	INTEGER, SAVE :: id_H2SO4_strat
	67	INTEGER, SAVE :: id_BIN01_strat
	68	INTEGER, SAVE :: id_TEST_strat
	69	#endif
[1279]	70
[1114]	71	CONTAINS
	72
	73	SUBROUTINE infotrac_init
[2391]	74	USE control_mod, ONLY: planet_type, config_inca
[1565]	75	#ifdef REPROBUS
	76	USE CHEM_REP, ONLY : Init_chem_rep_trac
	77	#endif
[1114]	78	IMPLICIT NONE
	79	!=======================================================================
	80	!
	81	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
	82	! -------
	83	! Modif special traceur F.Forget 05/94
	84	! Modif M-A Filiberti 02/02 lecture de traceur.def
	85	!
	86	! Objet:
	87	! ------
	88	! GCM LMD nouvelle grille
	89	!
	90	!=======================================================================
	91	! ... modification de l'integration de q ( 26/04/94 ) ....
	92	!-----------------------------------------------------------------------
	93	! Declarations
	94
	95	INCLUDE "dimensions.h"
	96	INCLUDE "iniprint.h"
	97
	98	! Local variables
	99	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
	100	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
	101
[2566]	102	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv_inca ! index of horizontal trasport schema
	103	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv_inca ! index of vertical trasport schema
	104
[1279]	105	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
[2270]	106	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name: CRisi
[1114]	107	CHARACTER(len=3), DIMENSION(30) :: descrq
	108	CHARACTER(len=1), DIMENSION(3) :: txts
	109	CHARACTER(len=2), DIMENSION(9) :: txtp
[1454]	110	CHARACTER(len=23) :: str1,str2
[1114]	111
	112	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
	113	INTEGER :: iq, new_iq, iiq, jq, ierr
[2270]	114	INTEGER :: ifils,ipere,generation ! CRisi
	115	LOGICAL :: continu,nouveau_traceurdef
	116	INTEGER :: IOstatus ! gestion de la retrocompatibilite de traceur.def
	117	CHARACTER(len=15) :: tchaine
[1454]	118
	119	character(len=*),parameter :: modname="infotrac_init"
[1114]	120	!-----------------------------------------------------------------------
	121	! Initialization :
	122	!
	123	txts=(/'x','y','z'/)
	124	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
	125
	126	descrq(14)='VLH'
	127	descrq(10)='VL1'
	128	descrq(11)='VLP'
	129	descrq(12)='FH1'
	130	descrq(13)='FH2'
	131	descrq(16)='PPM'
	132	descrq(17)='PPS'
	133	descrq(18)='PPP'
	134	descrq(20)='SLP'
	135	descrq(30)='PRA'
[1279]	136
[1114]	137
[1569]	138	! Coherence test between parameter type_trac, config_inca and preprocessing keys
[1563]	139	IF (type_trac=='inca') THEN
	140	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
	141	type_trac,' config_inca=',config_inca
[2180]	142	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
[1563]	143	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
	144	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
	145	END IF
[1569]	146	#ifndef INCA
	147	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
	148	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
	149	#endif
[1565]	150	ELSE IF (type_trac=='repr') THEN
	151	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
[1569]	152	#ifndef REPROBUS
	153	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
	154	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
	155	#endif
[3361]	156	ELSE IF (type_trac == 'co2i') THEN
	157	WRITE(lunout,*) 'You have chosen to run with CO2 cycle: type_trac=', type_trac
[2690]	158	ELSE IF (type_trac == 'coag') THEN
	159	WRITE(lunout,*) 'Tracers are treated for COAGULATION tests : type_trac=', type_trac
	160	#ifndef CPP_StratAer
	161	WRITE(lunout,*) 'To run this option you must add cpp key StratAer and compile with StratAer code'
	162	CALL abort_gcm('infotrac_init','You must compile with cpp key StratAer',1)
	163	#endif
[1563]	164	ELSE IF (type_trac == 'lmdz') THEN
	165	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
[1279]	166	ELSE
[1563]	167	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
	168	CALL abort_gcm('infotrac_init','bad parameter',1)
[1279]	169	END IF
	170
[1563]	171	! Test if config_inca is other then none for run without INCA
	172	IF (type_trac/='inca' .AND. config_inca/='none') THEN
	173	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
	174	config_inca='none'
	175	END IF
	176
[1114]	177	!-----------------------------------------------------------------------
	178	!
	179	! 1) Get the true number of tracers + water vapor/liquid
	180	! Here true tracers (nqtrue) means declared tracers (only first order)
	181	!
	182	!-----------------------------------------------------------------------
[3361]	183	IF (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac == 'coag' .OR. type_trac == 'co2i') THEN
[1114]	184	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	185	IF(ierr.EQ.0) THEN
[1454]	186	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
[1114]	187	READ(90,*) nqtrue
[2270]	188	write(lunout,*) 'nqtrue=',nqtrue
[1114]	189	ELSE
[1454]	190	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
	191	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
[2690]	192	IF (planet_type=='earth') THEN
[1454]	193	nqtrue=4 ! Default value for Earth
[2690]	194	ELSE
[1454]	195	nqtrue=1 ! Default value for other planets
[2690]	196	ENDIF
	197	ENDIF
[2262]	198	!jyg<
	199	!! if ( planet_type=='earth') then
	200	!! ! For Earth, water vapour & liquid tracers are not in the physics
	201	!! nbtr=nqtrue-2
	202	!! else
	203	!! ! Other planets (for now); we have the same number of tracers
	204	!! ! in the dynamics than in the physics
	205	!! nbtr=nqtrue
	206	!! endif
	207	!>jyg
[1563]	208	ELSE ! type_trac=inca
[2262]	209	!jyg<
	210	! The traceur.def file is used to define the number "nqo" of water phases
	211	! present in the simulation. Default : nqo = 2.
	212	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	213	IF(ierr.EQ.0) THEN
	214	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
	215	READ(90,*) nqo
	216	ELSE
	217	WRITE(lunout,*) trim(modname),': Using default value for nqo'
	218	nqo=2
	219	ENDIF
[2362]	220	IF (nqo /= 2 .AND. nqo /= 3 ) THEN
[2262]	221	WRITE(lunout,*) trim(modname),': nqo=',nqo, ' is not allowded. Only 2 or 3 water phases allowed'
	222	CALL abort_gcm('infotrac_init','Bad number of water phases',1)
	223	END IF
[1563]	224	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
[2372]	225	#ifdef INCA
	226	CALL Init_chem_inca_trac(nbtr)
	227	#endif
[2262]	228	nqtrue=nbtr+nqo
[2567]	229
	230	ALLOCATE(hadv_inca(nbtr), vadv_inca(nbtr))
	231
[2690]	232	ENDIF ! type_trac
[2262]	233	!>jyg
[1114]	234
[1454]	235	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
	236	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
[1114]	237	CALL abort_gcm('infotrac_init','Not enough tracers',1)
	238	END IF
[1563]	239
[2262]	240	!jyg<
[1565]	241	! Transfert number of tracers to Reprobus
[2262]	242	!! IF (type_trac == 'repr') THEN
	243	!!#ifdef REPROBUS
	244	!! CALL Init_chem_rep_trac(nbtr)
	245	!!#endif
	246	!! END IF
	247	!>jyg
[1563]	248
[1114]	249	!
[2262]	250	! Allocate variables depending on nqtrue
[1114]	251	!
[2270]	252	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue),tnom_transp(nqtrue))
[2566]	253
[2262]	254	!
	255	!jyg<
	256	!! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	257	!! conv_flg(:) = 1 ! convection activated for all tracers
	258	!! pbl_flg(:) = 1 ! boundary layer activated for all tracers
	259	!>jyg
[1114]	260
	261	!-----------------------------------------------------------------------
	262	! 2) Choix des schemas d'advection pour l'eau et les traceurs
	263	!
	264	! iadv = 1 schema transport type "humidite specifique LMD"
	265	! iadv = 2 schema amont
	266	! iadv = 14 schema Van-leer + humidite specifique
	267	! Modif F.Codron
	268	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
	269	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
	270	! iadv = 12 schema Frederic Hourdin I
	271	! iadv = 13 schema Frederic Hourdin II
	272	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
	273	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
	274	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
	275	! iadv = 20 schema Slopes
	276	! iadv = 30 schema Prather
	277	!
	278	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
	279	! iq = 2 pour l'eau liquide
	280	! Et eventuellement iq = 3,nqtot pour les autres traceurs
	281	!
	282	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
	283	!------------------------------------------------------------------------
	284	!
	285	! Get choice of advection schema from file tracer.def or from INCA
	286	!---------------------------------------------------------------------
[3361]	287	IF (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac == 'coag' .OR. type_trac == 'co2i') THEN
[1114]	288	IF(ierr.EQ.0) THEN
	289	! Continue to read tracer.def
	290	DO iq=1,nqtrue
[2270]	291
	292	write(,) 'infotrac 237: iq=',iq
	293	! CRisi: ajout du nom du fluide transporteur
	294	! mais rester retro compatible
	295	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	296	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	297	write(lunout,*) 'tchaine=',trim(tchaine)
	298	write(,) 'infotrac 238: IOstatus=',IOstatus
	299	if (IOstatus.ne.0) then
	300	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	301	endif
	302	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	303	! espace ou pas au milieu de la chaine.
[2391]	304	continu=.true.
	305	nouveau_traceurdef=.false.
[2270]	306	iiq=1
	307	do while (continu)
	308	if (tchaine(iiq:iiq).eq.' ') then
[2391]	309	nouveau_traceurdef=.true.
	310	continu=.false.
[2270]	311	else if (iiq.lt.LEN_TRIM(tchaine)) then
	312	iiq=iiq+1
	313	else
[2391]	314	continu=.false.
[2270]	315	endif
	316	enddo
	317	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	318	if (nouveau_traceurdef) then
	319	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	320	tnom_0(iq)=tchaine(1:iiq-1)
	321	tnom_transp(iq)=tchaine(iiq+1:15)
	322	else
	323	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	324	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	325	tnom_0(iq)=tchaine
	326	tnom_transp(iq) = 'air'
	327	endif
	328	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
	329	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	330
	331	END DO !DO iq=1,nqtrue
[1114]	332	CLOSE(90)
[2270]	333
[1454]	334	ELSE ! Without tracer.def, set default values
	335	if (planet_type=="earth") then
	336	! for Earth, default is to have 4 tracers
[1114]	337	hadv(1) = 14
	338	vadv(1) = 14
	339	tnom_0(1) = 'H2Ov'
[2270]	340	tnom_transp(1) = 'air'
[1114]	341	hadv(2) = 10
	342	vadv(2) = 10
	343	tnom_0(2) = 'H2Ol'
[2270]	344	tnom_transp(2) = 'air'
[1114]	345	hadv(3) = 10
	346	vadv(3) = 10
	347	tnom_0(3) = 'RN'
[2270]	348	tnom_transp(3) = 'air'
[1114]	349	hadv(4) = 10
	350	vadv(4) = 10
	351	tnom_0(4) = 'PB'
[2270]	352	tnom_transp(4) = 'air'
[1454]	353	else ! default for other planets
	354	hadv(1) = 10
	355	vadv(1) = 10
	356	tnom_0(1) = 'dummy'
[2270]	357	tnom_transp(1) = 'dummy'
[1454]	358	endif ! of if (planet_type=="earth")
[1114]	359	END IF
	360
[1454]	361	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
	362	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
[1114]	363	DO iq=1,nqtrue
[2270]	364	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq),tnom_transp(iq)
[1114]	365	END DO
	366
[2690]	367	IF ( planet_type=='earth') THEN
[2262]	368	!CR: nombre de traceurs de l eau
[2690]	369	IF (tnom_0(3) == 'H2Oi') THEN
[2262]	370	nqo=3
[2690]	371	ELSE
[2262]	372	nqo=2
[2690]	373	ENDIF
[2262]	374	! For Earth, water vapour & liquid tracers are not in the physics
	375	nbtr=nqtrue-nqo
[2690]	376	ELSE
[2262]	377	! Other planets (for now); we have the same number of tracers
	378	! in the dynamics than in the physics
	379	nbtr=nqtrue
[2690]	380	ENDIF
[2262]	381
[2690]	382	#ifdef CPP_StratAer
	383	IF (type_trac == 'coag') THEN
	384	nbtr_bin=0
	385	nbtr_sulgas=0
	386	DO iq=1,nqtrue
	387	IF (tnom_0(iq)(1:3)=='BIN') THEN !check if tracer name contains 'BIN'
	388	nbtr_bin=nbtr_bin+1
	389	ENDIF
	390	IF (tnom_0(iq)(1:3)=='GAS') THEN !check if tracer name contains 'GAS'
	391	nbtr_sulgas=nbtr_sulgas+1
	392	ENDIF
	393	ENDDO
	394	print*,'nbtr_bin=',nbtr_bin
	395	print*,'nbtr_sulgas=',nbtr_sulgas
	396	DO iq=1,nqtrue
	397	IF (tnom_0(iq)=='GASOCS') THEN
	398	id_OCS_strat=iq-nqo
	399	ENDIF
	400	IF (tnom_0(iq)=='GASSO2') THEN
	401	id_SO2_strat=iq-nqo
	402	ENDIF
	403	IF (tnom_0(iq)=='GASH2SO4') THEN
	404	id_H2SO4_strat=iq-nqo
	405	ENDIF
	406	IF (tnom_0(iq)=='BIN01') THEN
	407	id_BIN01_strat=iq-nqo
	408	ENDIF
	409	IF (tnom_0(iq)=='GASTEST') THEN
	410	id_TEST_strat=iq-nqo
	411	ENDIF
	412	ENDDO
	413	print*,'id_OCS_strat =',id_OCS_strat
	414	print*,'id_SO2_strat =',id_SO2_strat
	415	print*,'id_H2SO4_strat=',id_H2SO4_strat
	416	print*,'id_BIN01_strat=',id_BIN01_strat
	417	ENDIF
	418	#endif
	419
	420	ENDIF ! (type_trac == 'lmdz' .OR. type_trac == 'repr' .OR. type_trac = 'coag')
[2262]	421	!jyg<
	422	!
	423	! Transfert number of tracers to Reprobus
	424	IF (type_trac == 'repr') THEN
	425	#ifdef REPROBUS
[3798]	426	CALL Init_chem_rep_trac(nbtr,nqo,tnom_0)
[2262]	427	#endif
	428	END IF
	429	!
	430	! Allocate variables depending on nbtr
	431	!
	432	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	433	conv_flg(:) = 1 ! convection activated for all tracers
	434	pbl_flg(:) = 1 ! boundary layer activated for all tracers
	435	!
	436	!! ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
	437	!
	438	IF (type_trac == 'inca') THEN ! config_inca='aero' ou 'chem'
	439	!>jyg
[1114]	440	! le module de chimie fournit les noms des traceurs
[2566]	441	! et les schemas d'advection associes. excepte pour ceux lus
	442	! dans traceur.def
	443	IF (ierr .eq. 0) then
	444	DO iq=1,nqo
	445
	446	write(,) 'infotrac 237: iq=',iq
	447	! CRisi: ajout du nom du fluide transporteur
	448	! mais rester retro compatible
	449	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	450	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	451	write(lunout,*) 'tchaine=',trim(tchaine)
	452	write(,) 'infotrac 238: IOstatus=',IOstatus
	453	if (IOstatus.ne.0) then
	454	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	455	endif
	456	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	457	! espace ou pas au milieu de la chaine.
	458	continu=.true.
	459	nouveau_traceurdef=.false.
	460	iiq=1
	461	do while (continu)
	462	if (tchaine(iiq:iiq).eq.' ') then
	463	nouveau_traceurdef=.true.
	464	continu=.false.
	465	else if (iiq.lt.LEN_TRIM(tchaine)) then
	466	iiq=iiq+1
	467	else
	468	continu=.false.
	469	endif
	470	enddo
	471	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	472	if (nouveau_traceurdef) then
	473	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	474	tnom_0(iq)=tchaine(1:iiq-1)
	475	tnom_transp(iq)=tchaine(iiq+1:15)
	476	else
	477	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	478	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	479	tnom_0(iq)=tchaine
	480	tnom_transp(iq) = 'air'
	481	endif
	482	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
	483	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	484
	485	END DO !DO iq=1,nqtrue
	486	CLOSE(90)
	487	ELSE !! if traceur.def doesn't exist
	488	tnom_0(1)='H2Ov'
	489	tnom_transp(1) = 'air'
	490	tnom_0(2)='H2Ol'
	491	tnom_transp(2) = 'air'
	492	hadv(1) = 10
	493	hadv(2) = 10
	494	vadv(1) = 10
	495	vadv(2) = 10
	496	ENDIF
	497
[1114]	498	#ifdef INCA
	499	CALL init_transport( &
[2566]	500	hadv_inca, &
	501	vadv_inca, &
[1114]	502	conv_flg, &
	503	pbl_flg, &
[2180]	504	solsym)
[1114]	505	#endif
	506
[2566]	507
[2262]	508	!jyg<
	509	DO iq = nqo+1, nqtrue
[2566]	510	hadv(iq) = hadv_inca(iq-nqo)
	511	vadv(iq) = vadv_inca(iq-nqo)
[2262]	512	tnom_0(iq)=solsym(iq-nqo)
[2362]	513	tnom_transp(iq) = 'air'
[1114]	514	END DO
	515
[2262]	516	END IF ! (type_trac == 'inca')
[1114]	517
	518	!-----------------------------------------------------------------------
	519	!
	520	! 3) Verify if advection schema 20 or 30 choosen
	521	! Calculate total number of tracers needed: nqtot
	522	! Allocate variables depending on total number of tracers
	523	!-----------------------------------------------------------------------
	524	new_iq=0
	525	DO iq=1,nqtrue
	526	! Add tracers for certain advection schema
	527	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
	528	new_iq=new_iq+1 ! no tracers added
	529	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
	530	new_iq=new_iq+4 ! 3 tracers added
	531	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
	532	new_iq=new_iq+10 ! 9 tracers added
	533	ELSE
[1454]	534	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
[1114]	535	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
	536	END IF
	537	END DO
	538
	539	IF (new_iq /= nqtrue) THEN
	540	! The choice of advection schema imposes more tracers
	541	! Assigne total number of tracers
	542	nqtot = new_iq
	543
[1454]	544	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
[1114]	545	WRITE(lunout,*) 'makes it necessary to add tracers'
[1454]	546	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
	547	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
[1114]	548
	549	ELSE
	550	! The true number of tracers is also the total number
	551	nqtot = nqtrue
	552	END IF
	553
	554	!
	555	! Allocate variables with total number of tracers, nqtot
	556	!
	557	ALLOCATE(tname(nqtot), ttext(nqtot))
	558	ALLOCATE(iadv(nqtot), niadv(nqtot))
	559
	560	!-----------------------------------------------------------------------
	561	!
	562	! 4) Determine iadv, long and short name
	563	!
	564	!-----------------------------------------------------------------------
	565	new_iq=0
	566	DO iq=1,nqtrue
	567	new_iq=new_iq+1
	568
	569	! Verify choice of advection schema
	570	IF (hadv(iq)==vadv(iq)) THEN
	571	iadv(new_iq)=hadv(iq)
	572	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
	573	iadv(new_iq)=11
	574	ELSE
[1454]	575	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
	576
[1114]	577	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
	578	END IF
	579
	580	str1=tnom_0(iq)
	581	tname(new_iq)= tnom_0(iq)
	582	IF (iadv(new_iq)==0) THEN
[1454]	583	ttext(new_iq)=trim(str1)
[1114]	584	ELSE
[1454]	585	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
[1114]	586	END IF
	587
	588	! schemas tenant compte des moments d'ordre superieur
	589	str2=ttext(new_iq)
	590	IF (iadv(new_iq)==20) THEN
	591	DO jq=1,3
	592	new_iq=new_iq+1
	593	iadv(new_iq)=-20
[1454]	594	ttext(new_iq)=trim(str2)//txts(jq)
	595	tname(new_iq)=trim(str1)//txts(jq)
[1114]	596	END DO
	597	ELSE IF (iadv(new_iq)==30) THEN
	598	DO jq=1,9
	599	new_iq=new_iq+1
	600	iadv(new_iq)=-30
[1454]	601	ttext(new_iq)=trim(str2)//txtp(jq)
	602	tname(new_iq)=trim(str1)//txtp(jq)
[1114]	603	END DO
	604	END IF
	605	END DO
	606
	607	!
	608	! Find vector keeping the correspodence between true and total tracers
	609	!
	610	niadv(:)=0
	611	iiq=0
	612	DO iq=1,nqtot
	613	IF(iadv(iq).GE.0) THEN
	614	! True tracer
	615	iiq=iiq+1
	616	niadv(iiq)=iq
	617	ENDIF
	618	END DO
	619
	620
[1454]	621	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
	622	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
[1114]	623	DO iq=1,nqtot
[1454]	624	WRITE(lunout,*) iadv(iq),niadv(iq),&
	625	' ',trim(tname(iq)),' ',trim(ttext(iq))
[1114]	626	END DO
	627
[1279]	628	!
	629	! Test for advection schema.
	630	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
	631	!
	632	DO iq=1,nqtot
	633	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
[1454]	634	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	635	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
	636	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
[1454]	637	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	638	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
	639	END IF
	640	END DO
	641
[2270]	642
	643	! CRisi: quels sont les traceurs fils et les traceurs pères.
	644	! initialiser tous les tableaux d'indices liés aux traceurs familiaux
	645	! + vérifier que tous les pères sont écrits en premières positions
	646	ALLOCATE(nqfils(nqtot),nqdesc(nqtot))
	647	ALLOCATE(iqfils(nqtot,nqtot))
	648	ALLOCATE(iqpere(nqtot))
	649	nqperes=0
	650	nqfils(:)=0
	651	nqdesc(:)=0
	652	iqfils(:,:)=0
	653	iqpere(:)=0
	654	nqdesc_tot=0
	655	DO iq=1,nqtot
	656	if (tnom_transp(iq) == 'air') then
	657	! ceci est un traceur père
	658	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un pere'
	659	nqperes=nqperes+1
	660	iqpere(iq)=0
	661	else !if (tnom_transp(iq) == 'air') then
	662	! ceci est un fils. Qui est son père?
	663	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un fils'
	664	continu=.true.
	665	ipere=1
	666	do while (continu)
	667	if (tnom_transp(iq) == tnom_0(ipere)) then
	668	! Son père est ipere
	669	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
	670	& trim(tnom_0(iq)),' est le fils de ',ipere,'appele ',trim(tnom_0(ipere))
	671	nqfils(ipere)=nqfils(ipere)+1
	672	iqfils(nqfils(ipere),ipere)=iq
	673	iqpere(iq)=ipere
	674	continu=.false.
	675	else !if (tnom_transp(iq) == tnom_0(ipere)) then
	676	ipere=ipere+1
	677	if (ipere.gt.nqtot) then
	678	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
[3361]	679	& trim(tnom_0(iq)),', est orphelin.'
[2270]	680	CALL abort_gcm('infotrac_init','Un traceur est orphelin',1)
	681	endif !if (ipere.gt.nqtot) then
	682	endif !if (tnom_transp(iq) == tnom_0(ipere)) then
	683	enddo !do while (continu)
	684	endif !if (tnom_transp(iq) == 'air') then
	685	enddo !DO iq=1,nqtot
	686	WRITE(lunout,*) 'infotrac: nqperes=',nqperes
	687	WRITE(lunout,*) 'nqfils=',nqfils
	688	WRITE(lunout,*) 'iqpere=',iqpere
	689	WRITE(lunout,*) 'iqfils=',iqfils
	690
	691	! Calculer le nombre de descendants à partir de iqfils et de nbfils
	692	DO iq=1,nqtot
	693	generation=0
	694	continu=.true.
	695	ifils=iq
	696	do while (continu)
	697	ipere=iqpere(ifils)
	698	if (ipere.gt.0) then
	699	nqdesc(ipere)=nqdesc(ipere)+1
	700	nqdesc_tot=nqdesc_tot+1
	701	iqfils(nqdesc(ipere),ipere)=iq
	702	ifils=ipere
	703	generation=generation+1
	704	else !if (ipere.gt.0) then
	705	continu=.false.
	706	endif !if (ipere.gt.0) then
	707	enddo !do while (continu)
	708	WRITE(lunout,*) 'Le traceur ',iq,', appele ',trim(tnom_0(iq)),' est un traceur de generation: ',generation
	709	enddo !DO iq=1,nqtot
	710	WRITE(lunout,*) 'infotrac: nqdesc=',nqdesc
	711	WRITE(lunout,*) 'iqfils=',iqfils
	712	WRITE(lunout,*) 'nqdesc_tot=',nqdesc_tot
	713
	714	! Interdire autres schémas que 10 pour les traceurs fils, et autres schémas
	715	! que 10 et 14 si des pères ont des fils
	716	do iq=1,nqtot
	717	if (iqpere(iq).gt.0) then
	718	! ce traceur a un père qui n'est pas l'air
	719	! Seul le schéma 10 est autorisé
	720	if (iadv(iq)/=10) then
	721	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for sons'
	722	CALL abort_gcm('infotrac_init','Sons should be advected by scheme 10',1)
	723	endif
	724	! Le traceur père ne peut être advecté que par schéma 10 ou 14:
	725	IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	726	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for fathers'
	727	CALL abort_gcm('infotrac_init','Fathers should be advected by scheme 10 ou 14',1)
	728	endif !IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	729	endif !if (iqpere(iq).gt.0) the
	730	enddo !do iq=1,nqtot
	731
[3361]	732	WRITE(lunout,*) 'infotrac init fin'
[2270]	733
	734	! detecter quels sont les traceurs isotopiques parmi des traceurs
	735	call infotrac_isoinit(tnom_0,nqtrue)
	736
[1114]	737	!-----------------------------------------------------------------------
	738	! Finalize :
	739	!
[2270]	740	DEALLOCATE(tnom_0, hadv, vadv,tnom_transp)
[1114]	741
[2180]	742
[1114]	743	END SUBROUTINE infotrac_init
	744
[2270]	745	SUBROUTINE infotrac_isoinit(tnom_0,nqtrue)
	746
	747	#ifdef CPP_IOIPSL
	748	use IOIPSL
	749	#else
	750	! if not using IOIPSL, we still need to use (a local version of) getin
	751	use ioipsl_getincom
	752	#endif
	753	implicit none
	754
	755	! inputs
	756	INTEGER nqtrue
	757	CHARACTER(len=15) tnom_0(nqtrue)
	758
	759	! locals
	760	CHARACTER(len=3), DIMENSION(niso_possibles) :: tnom_iso
	761	INTEGER, ALLOCATABLE,DIMENSION(:,:) :: nb_iso,nb_traciso
	762	INTEGER, ALLOCATABLE,DIMENSION(:) :: nb_isoind
	763	INTEGER :: ntraceurs_zone_prec,iq,phase,ixt,iiso,izone
	764	CHARACTER(len=19) :: tnom_trac
	765	INCLUDE "iniprint.h"
	766
	767	tnom_iso=(/'eau','HDO','O18','O17','HTO'/)
	768
	769	ALLOCATE(nb_iso(niso_possibles,nqo))
	770	ALLOCATE(nb_isoind(nqo))
	771	ALLOCATE(nb_traciso(niso_possibles,nqo))
	772	ALLOCATE(iso_num(nqtot))
	773	ALLOCATE(iso_indnum(nqtot))
	774	ALLOCATE(zone_num(nqtot))
	775	ALLOCATE(phase_num(nqtot))
	776
	777	iso_num(:)=0
	778	iso_indnum(:)=0
	779	zone_num(:)=0
	780	phase_num(:)=0
	781	indnum_fn_num(:)=0
	782	use_iso(:)=.false.
	783	nb_iso(:,:)=0
	784	nb_isoind(:)=0
	785	nb_traciso(:,:)=0
	786	niso=0
	787	ntraceurs_zone=0
	788	ntraceurs_zone_prec=0
	789	ntraciso=0
	790
	791	do iq=nqo+1,nqtot
[2372]	792	! write(lunout,*) 'infotrac 569: iq,tnom_0(iq)=',iq,tnom_0(iq)
[2270]	793	do phase=1,nqo
	794	do ixt= 1,niso_possibles
	795	tnom_trac=trim(tnom_0(phase))//'_'
	796	tnom_trac=trim(tnom_trac)//trim(tnom_iso(ixt))
[2372]	797	! write(,) 'phase,ixt,tnom_trac=',phase,ixt,tnom_trac
[2270]	798	IF (tnom_0(iq) == tnom_trac) then
[2372]	799	! write(lunout,*) 'Ce traceur est un isotope'
[2270]	800	nb_iso(ixt,phase)=nb_iso(ixt,phase)+1
	801	nb_isoind(phase)=nb_isoind(phase)+1
	802	iso_num(iq)=ixt
	803	iso_indnum(iq)=nb_isoind(phase)
	804	indnum_fn_num(ixt)=iso_indnum(iq)
	805	phase_num(iq)=phase
[2372]	806	! write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	807	! write(lunout,*) 'iso_indnum(iq)=',iso_indnum(iq)
	808	! write(lunout,*) 'indnum_fn_num(ixt)=',indnum_fn_num(ixt)
	809	! write(lunout,*) 'phase_num(iq)=',phase_num(iq)
[2270]	810	goto 20
	811	else if (iqpere(iq).gt.0) then
	812	if (tnom_0(iqpere(iq)) == tnom_trac) then
[2372]	813	! write(lunout,*) 'Ce traceur est le fils d''un isotope'
[2270]	814	! c'est un traceur d'isotope
	815	nb_traciso(ixt,phase)=nb_traciso(ixt,phase)+1
	816	iso_num(iq)=ixt
	817	iso_indnum(iq)=indnum_fn_num(ixt)
	818	zone_num(iq)=nb_traciso(ixt,phase)
	819	phase_num(iq)=phase
[2372]	820	! write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	821	! write(lunout,*) 'phase_num(iq)=',phase_num(iq)
	822	! write(lunout,*) 'zone_num(iq)=',zone_num(iq)
[2270]	823	goto 20
	824	endif !if (tnom_0(iqpere(iq)) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	825	endif !IF (tnom_0(iq) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	826	enddo !do ixt= niso_possibles
	827	enddo !do phase=1,nqo
	828	20 continue
	829	enddo !do iq=1,nqtot
	830
[2372]	831	! write(lunout,*) 'iso_num=',iso_num
	832	! write(lunout,*) 'iso_indnum=',iso_indnum
	833	! write(lunout,*) 'zone_num=',zone_num
	834	! write(lunout,*) 'phase_num=',phase_num
	835	! write(lunout,*) 'indnum_fn_num=',indnum_fn_num
[2270]	836
	837	do ixt= 1,niso_possibles
	838
	839	if (nb_iso(ixt,1).eq.1) then
	840	! on vérifie que toutes les phases ont le même nombre de
	841	! traceurs
	842	do phase=2,nqo
	843	if (nb_iso(ixt,phase).ne.nb_iso(ixt,1)) then
[2372]	844	! write(lunout,*) 'ixt,phase,nb_iso=',ixt,phase,nb_iso(ixt,phase)
[2270]	845	CALL abort_gcm('infotrac_init','Phases must have same number of isotopes',1)
	846	endif
	847	enddo !do phase=2,nqo
	848
	849	niso=niso+1
	850	use_iso(ixt)=.true.
	851	ntraceurs_zone=nb_traciso(ixt,1)
	852
	853	! on vérifie que toutes les phases ont le même nombre de
	854	! traceurs
	855	do phase=2,nqo
	856	if (nb_traciso(ixt,phase).ne.ntraceurs_zone) then
	857	write(lunout,*) 'ixt,phase,nb_traciso=',ixt,phase,nb_traciso(ixt,phase)
	858	write(lunout,*) 'ntraceurs_zone=',ntraceurs_zone
	859	CALL abort_gcm('infotrac_init','Phases must have same number of tracers',1)
	860	endif
	861	enddo !do phase=2,nqo
	862	! on vérifie que tous les isotopes ont le même nombre de
	863	! traceurs
	864	if (ntraceurs_zone_prec.gt.0) then
	865	if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	866	ntraceurs_zone_prec=ntraceurs_zone
	867	else !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	868	write(,) 'ntraceurs_zone_prec,ntraceurs_zone=',ntraceurs_zone_prec,ntraceurs_zone
	869	CALL abort_gcm('infotrac_init', &
	870	&'Isotope tracers are not well defined in traceur.def',1)
	871	endif !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	872	endif !if (ntraceurs_zone_prec.gt.0) then
	873
	874	else if (nb_iso(ixt,1).ne.0) then
	875	WRITE(lunout,*) 'nqo,ixt=',nqo,ixt
	876	WRITE(lunout,*) 'nb_iso(ixt,1)=',nb_iso(ixt,1)
	877	CALL abort_gcm('infotrac_init','Isotopes are not well defined in traceur.def',1)
	878	endif !if (nb_iso(ixt,1).eq.1) then
	879	enddo ! do ixt= niso_possibles
	880
	881	! dimensions isotopique:
	882	ntraciso=niso*(ntraceurs_zone+1)
[2372]	883	! WRITE(lunout,*) 'niso=',niso
	884	! WRITE(lunout,*) 'ntraceurs_zone,ntraciso=',ntraceurs_zone,ntraciso
[2270]	885
	886	! flags isotopiques:
	887	if (niso.gt.0) then
	888	ok_isotopes=.true.
	889	else
	890	ok_isotopes=.false.
	891	endif
[2372]	892	! WRITE(lunout,*) 'ok_isotopes=',ok_isotopes
[2270]	893
	894	if (ok_isotopes) then
	895	ok_iso_verif=.false.
	896	call getin('ok_iso_verif',ok_iso_verif)
	897	ok_init_iso=.false.
	898	call getin('ok_init_iso',ok_init_iso)
	899	tnat=(/1.0,155.76e-6,2005.2e-6,0.004/100.,0.0/)
	900	alpha_ideal=(/1.0,1.01,1.006,1.003,1.0/)
	901	endif !if (ok_isotopes) then
[2372]	902	! WRITE(lunout,*) 'ok_iso_verif=',ok_iso_verif
	903	! WRITE(lunout,*) 'ok_init_iso=',ok_init_iso
[2270]	904
	905	if (ntraceurs_zone.gt.0) then
	906	ok_isotrac=.true.
	907	else
	908	ok_isotrac=.false.
	909	endif
[2372]	910	! WRITE(lunout,*) 'ok_isotrac=',ok_isotrac
[2270]	911
	912	! remplissage du tableau iqiso(ntraciso,phase)
	913	ALLOCATE(iqiso(ntraciso,nqo))
	914	iqiso(:,:)=0
	915	do iq=1,nqtot
	916	if (iso_num(iq).gt.0) then
	917	ixt=iso_indnum(iq)+zone_num(iq)*niso
	918	iqiso(ixt,phase_num(iq))=iq
	919	endif
	920	enddo
[2372]	921	! WRITE(lunout,*) 'iqiso=',iqiso
[2270]	922
	923	! replissage du tableau index_trac(ntraceurs_zone,niso)
	924	ALLOCATE(index_trac(ntraceurs_zone,niso))
	925	if (ok_isotrac) then
	926	do iiso=1,niso
	927	do izone=1,ntraceurs_zone
	928	index_trac(izone,iiso)=iiso+izone*niso
	929	enddo
	930	enddo
	931	else !if (ok_isotrac) then
	932	index_trac(:,:)=0.0
	933	endif !if (ok_isotrac) then
[2372]	934	! write(lunout,*) 'index_trac=',index_trac
[2270]	935
	936	! Finalize :
	937	DEALLOCATE(nb_iso)
	938
	939	END SUBROUTINE infotrac_isoinit
	940
[1114]	941	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format