source: LMDZ6/branches/LMDZ_ECRad/libf/phylmd/ecrad/test/ifs/Makefile @ 5214

Last change on this file since 5214 was 4728, checked in by idelkadi, 11 months ago

Update of ecrad in the LMDZ_ECRad branch of LMDZ:

  • version 1.6.1 of ecrad
  • files are no longer grouped in the same ecrad directory.
  • the structure of ecrad offline is preserved to facilitate updating in LMDZ
  • cfg.bld modified to take into account the new added subdirectories.
  • the interface routines and those added in ecrad are moved to the phylmd directory
File size: 8.7 KB
Line 
1INPUT = ecrad_meridian
2
3#DRIVER = totalview ../../bin/ecrad -a
4DRIVER = ../../bin/ecrad
5IFS_DRIVER = ../../bin/ecrad_ifs
6IFS_DRIVER_BLOCKED = ../../bin/ecrad_ifs_blocked
7CHANGENAM = ../common/change_namelist.sh
8
9# Various configuration files corresponding to cycles of ECMWF's
10# Integrated Forecasting System (IFS)
11#CONFIG = configCY43R3.nam
12#CONFIG = configCY46R1.nam
13#CONFIG = configCY47R1.nam
14#CONFIG = configCY47R3.nam
15CONFIG = configCY49R1.nam
16CONFIG_ECCKD = configCY49R1_ecckd.nam
17
18# Typing "make" will run radiation scheme on IFS profiles
19all: test
20
21test: test_orig test_ecckd
22
23# Tests of CY47R1 configuration with RRTMG gas optics model and
24# various solvers
25test_orig: test_default test_noaer test_expexp test_vec test_tripleclouds test_spartacus \
26        test_spartacus_maxentr
27
28# Tests of ecCKD gas optics model and various solvers
29test_ecckd: test_ecckd_mcica test_ecckd_tc test_ecckd_tc_noaer test_ecckd_spartacus
30
31# Default IFS settings: McICA solver with exponential-exponential
32# overlap
33test_default:
34        $(DRIVER) $(CONFIG) $(INPUT).nc $(INPUT)_default_out.nc
35
36test_ifsdriver:
37        $(CHANGENAM) $(CONFIG) config_net.nam do_save_net_fluxes=true do_write_double_precision=true \
38                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
39        $(IFS_DRIVER) config_net.nam $(INPUT).nc $(INPUT)_ifsdriver_out.nc | tee $(INPUT)_ifsdriver_out.log
40        $(DRIVER) config_net.nam $(INPUT).nc $(INPUT)_net_out.nc | tee $(INPUT)_net_out.log
41
42test_ifsdriver_blocked:
43        $(CHANGENAM) $(CONFIG) config_net.nam do_save_net_fluxes=true do_write_double_precision=true \
44                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
45        $(IFS_DRIVER_BLOCKED) config_net.nam $(INPUT).nc $(INPUT)_ifsdriver_blocked_out.nc | tee $(INPUT)_ifsdriver_blocked_out.log
46        $(DRIVER) config_net.nam $(INPUT).nc $(INPUT)_net_out.nc | tee $(INPUT)_net_out.log
47
48# Turn off aerosols
49test_noaer:
50        $(CHANGENAM) $(CONFIG) config_noaer.nam \
51                use_aerosols=false
52        $(DRIVER) config_noaer.nam $(INPUT).nc $(INPUT)_noaer_out.nc
53
54# Older exponential-exponential overlap
55test_expexp:
56        $(CHANGENAM) $(CONFIG) config_expexp.nam \
57                overlap_scheme_name='"Exp-Exp"'
58        $(DRIVER) config_expexp.nam $(INPUT).nc $(INPUT)_expexp_out.nc
59
60# Tripleclouds solver with exponential-random overlap
61test_tripleclouds:
62        $(CHANGENAM) $(CONFIG) config_tc.nam \
63                sw_solver_name='"Tripleclouds"' lw_solver_name='"Tripleclouds"'
64        $(DRIVER) config_tc.nam $(INPUT).nc $(INPUT)_tc_out.nc
65
66# Longwave scattering; since 46R1 this is the default
67test_lwscat:
68        $(CHANGENAM) $(CONFIG) config_lwscat.nam \
69                do_lw_cloud_scattering="true"
70        $(DRIVER) config_lwscat.nam $(INPUT).nc $(INPUT)_lwscat_out.nc
71
72# 3D radiative transfer
73test_spartacus:
74        $(CHANGENAM) $(CONFIG) config_spartacus.nam \
75                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
76                do_3d_effects="true" \
77                do_sw_delta_scaling_with_gases="false"
78        $(DRIVER) config_spartacus.nam $(INPUT).nc $(INPUT)_spartacus_out.nc
79
80# 3D radiative transfer using the older "maximum entrapment"
81test_spartacus_maxentr:
82        $(CHANGENAM) $(CONFIG) config_spartacus_maxentr.nam \
83                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
84                do_3d_effects="true" \
85                sw_entrapment_name='"Maximum"' \
86                do_sw_delta_scaling_with_gases="false"
87        $(DRIVER) config_spartacus_maxentr.nam $(INPUT).nc $(INPUT)_spartacus_maxentr_out.nc
88
89# "Cloudless" solver
90test_cloudless:
91        $(CHANGENAM) $(CONFIG) config_cloudless.nam \
92                use_aerosols=false \
93                sw_solver_name='"Cloudless"' lw_solver_name='"Cloudless"'
94        $(DRIVER) config_cloudless.nam $(INPUT).nc $(INPUT)_cloudless_out.nc
95
96# Exponential-random overlap with "vectorizable" cloud generator
97test_vec:
98        $(CHANGENAM) $(CONFIG) config_vec.nam use_vectorizable_generator=true
99        $(DRIVER) config_vec.nam $(INPUT).nc $(INPUT)_vec_out.nc
100
101
102### The following targets use the $CONFIG_ECCKD configuration file ###
103
104# ecCKD gas optics scheme (note that default solver is Tripleclouds)
105test_ecckd_mcica:
106        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_mcica.nam \
107                sw_solver_name='"McICA"' lw_solver_name='"McICA"'
108        $(DRIVER) config_ecckd_mcica.nam $(INPUT).nc $(INPUT)_ecckd_mcica_out.nc
109
110# ecCKD with Tripleclouds solver (default)
111test_ecckd_tc:
112        $(DRIVER) $(CONFIG_ECCKD) $(INPUT).nc $(INPUT)_ecckd_tc_out.nc
113
114# ecCKD with no aerosols
115test_ecckd_noaer:
116        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_noaer.nam \
117                use_aerosols=false
118        $(DRIVER) config_ecckd_noaer.nam $(INPUT).nc $(INPUT)_ecckd_noaer_out.nc
119
120# Test the different ways that aerosol optical properties can be
121# averaged, outputing the aerosol properties in each gas-optics
122# spectral interval, producing the following:
123#   aerosol_optics_rrtmg.nc: RRTMG gas optics, aerosol properties from band-wise file
124#   aerosol_optics_ecckd.nc: ecCKD gas optics, aerosol properties from high-res file
125#   aerosol_optics_rrtmg.nc: RRTMG gas optics, aerosol properties from high-res file
126#   aerosol_optics_ecckd.nc: ecCKD gas optics, aerosol properties from band-wise file
127test_aerosol_averaging:
128        $(CHANGENAM) $(CONFIG) config_rrtmg_saveaer.nam \
129                do_save_aerosol_optics=true
130        $(DRIVER) config_rrtmg_saveaer.nam $(INPUT).nc $(INPUT)_rrtmg_saveaer_out.nc
131        mv aerosol_optics.nc aerosol_optics_rrtmg.nc
132        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_saveaer.nam \
133                do_save_aerosol_optics=true
134        $(DRIVER) config_ecckd_saveaer.nam $(INPUT).nc $(INPUT)_ecckd_saveaer_out.nc
135        mv aerosol_optics.nc aerosol_optics_ecckd.nc
136        $(CHANGENAM) $(CONFIG) config_rrtmg_gen_saveaer.nam \
137                do_save_aerosol_optics=true use_general_aerosol_optics=true \
138                aerosol_optics_override_file_name="'aerosol_ifs_48R1.nc'" 
139        $(DRIVER) config_rrtmg_gen_saveaer.nam $(INPUT).nc $(INPUT)_rrtmg_gen_saveaer_out.nc
140        mv aerosol_optics.nc aerosol_optics_rrtmg_gen.nc
141        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_band_saveaer.nam \
142                do_save_aerosol_optics=true \
143                aerosol_optics_override_file_name="'aerosol_ifs_rrtm_46R1_with_NI_AM.nc'" 
144        $(DRIVER) config_ecckd_band_saveaer.nam $(INPUT).nc $(INPUT)_ecckd_band_saveaer_out.nc
145        mv aerosol_optics.nc aerosol_optics_ecckd_band.nc
146
147# ecCKD gas optics with SPARTACUS solver (not currently correct)
148test_ecckd_spartacus:
149        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_spartacus.nam \
150                sw_solver_name='"SPARTACUS"' lw_solver_name='"SPARTACUS"' \
151                do_3d_effects="true" 
152        $(DRIVER) config_ecckd_spartacus.nam $(INPUT).nc $(INPUT)_ecckd_spartacus_out.nc
153
154# ecCKD gas optics with no aerosol
155test_ecckd_tc_noaer:
156        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_tc_noaer.nam \
157                use_aerosols=false 
158        $(DRIVER) config_ecckd_tc_noaer.nam $(INPUT).nc $(INPUT)_ecckd_tc_noaer_out.nc
159
160# Profiling
161TAG = default
162profile:
163        mkdir -p profiling_$(TAG)
164        $(CHANGENAM) $(CONFIG) config_profile.nam \
165                nrepeat=100 do_save_spectral_flux=false
166        DR_HOOK=1 DR_HOOK_OPT=prof DR_HOOK_PROFILE=profiling_$(TAG)/$(INPUT)_default_prof_out.drhook \
167                $(DRIVER) config_profile.nam $(INPUT).nc $(INPUT)_default_prof_out.nc \
168                | tee $(INPUT)_default_prof_out.log
169        if [[ -f gmon.out ]]; then gprof $(DRIVER) gmon.out > profiling_$(TAG)/$(INPUT)_default_prof_out.gprof; fi
170        $(CHANGENAM) $(CONFIG_ECCKD) config_profile.nam \
171                nrepeat=100 do_save_spectral_flux=false do_save_radiative_properties=false
172        DR_HOOK=1 DR_HOOK_OPT=prof DR_HOOK_PROFILE=profiling_$(TAG)/$(INPUT)_ecckd_tc_prof_out.drhook \
173                $(DRIVER) config_profile.nam $(INPUT).nc $(INPUT)_ecckd_tc_prof_out.nc \
174                | tee $(INPUT)_ecckd_tc_prof_out.log
175        if [[ -f gmon.out ]]; then gprof $(DRIVER) gmon.out > $(INPUT)_ecckd_tc_prof_out.gprof; fi
176
177        mv $(INPUT)_*_prof_out.* profiling_$(TAG)
178
179# ecCKD gas optics with spectral diagnostics every 25nm in the visible
180# written to a separate file; do this both with the 32- and 96-gpoint
181# models (which have 100nm and 25nm resolution in the visible,
182# respectively).
183DIAGBOUNDS="sw_diag_wavelength_bound=.2e-6,.225e-6,.25e-6,.275e-6,.3e-6,.325e-6,.35e-6,.375e-6,.4e-6,.425e-6,.45e-6,.475e-6,.5e-6,.525e-6,.55e-6,.575e-6,.6e-6,.625e-6,.65e-6,.675e-6,.7e-6"
184test_diag:
185        $(CHANGENAM) $(CONFIG_ECCKD) config_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rrtmg.nc"' gas_model_name='"RRTMG-IFS"'
186        $(DRIVER) config_diag.nam $(INPUT).nc $(INPUT)_diag_rrtmg_out.nc
187        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rgb_orig.nc"'
188        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_rgb_orig_out.nc
189        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_rgb.nc"' \
190                gas_optics_sw_override_file_name='"ecckd-1.4_sw_climate_rgb-32b_ckd-definition.nc"'
191        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_rgb_out.nc
192        $(CHANGENAM) $(CONFIG_ECCKD) config_ecckd_diag.nam $(DIAGBOUNDS) sw_diag_file_name='"sw_diag_vfine.nc"' \
193                gas_optics_sw_override_file_name='"ecckd-1.4_sw_climate_vfine-96b_ckd-definition.nc"'
194        $(DRIVER) config_ecckd_diag.nam $(INPUT).nc $(INPUT)_ecckd_diag_vfine_out.nc
195
196# Clean data files
197clean:
198        rm -f *_out.nc tmp*.nc radiative_properties*.nc inputs.nc sw_diag*nc \
199        config_*.nam gmon.out
Note: See TracBrowser for help on using the repository browser.