source: LMDZ6/branches/LMDZ_ECRad/libf/dyn3dmem/dynredem_loc.F90 @ 5187

Last change on this file since 5187 was 4482, checked in by lguez, 20 months ago

Sync latest trunk changes to branch LMDZ_ECRad
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
File size: 10.5 KB
Line 
1SUBROUTINE dynredem0_loc(fichnom,iday_end,phis)
2!
3!-------------------------------------------------------------------------------
4! Write the NetCDF restart file (initialization).
5!-------------------------------------------------------------------------------
6#ifdef CPP_IOIPSL
7  USE IOIPSL
8#endif
9  USE parallel_lmdz
10  USE mod_hallo
11  USE strings_mod, ONLY: maxlen
12  USE infotrac, ONLY: nqtot, tracers
13  USE netcdf, ONLY: NF90_CREATE, NF90_DEF_DIM, NF90_INQ_VARID, NF90_GLOBAL,    &
14                    NF90_CLOSE,  NF90_PUT_ATT, NF90_UNLIMITED, NF90_CLOBBER,   &
15                    NF90_64BIT_OFFSET
16  USE dynredem_mod, ONLY: cre_var, put_var, err, modname, fil
17  USE comvert_mod,  ONLY: ap, bp, presnivs, pa, preff, nivsig, nivsigs,&
18                          aps,bps,pseudoalt
19  USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad
20  USE logic_mod, ONLY: fxyhypb, ysinus
21  USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy, &
22                       taux,tauy
23  USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time
24  USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0
25
26  IMPLICIT NONE
27  include "dimensions.h"
28  include "paramet.h"
29  include "comgeom.h"
30  include "description.h"
31  include "iniprint.h"
32!===============================================================================
33! Arguments:
34  CHARACTER(LEN=*), INTENT(IN) :: fichnom          !--- FILE NAME
35  INTEGER,          INTENT(IN) :: iday_end         !---
36  REAL,             INTENT(IN) :: phis(ijb_u:ije_u)!--- GROUND GEOPOTENTIAL
37!===============================================================================
38! Local variables:
39  INTEGER :: iq
40  INTEGER, PARAMETER :: length=100
41  REAL    :: tab_cntrl(length)                     !--- RUN PARAMETERS TABLE
42  REAL    :: phis_glo(ip1jmp1)
43!   For NetCDF:
44  CHARACTER(LEN=maxlen) :: unites
45  INTEGER :: indexID
46  INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID
47  INTEGER :: sID, sigID, nID, timID
48  INTEGER :: yyears0, jjour0, mmois0
49  REAL    :: zjulian, hours
50!===============================================================================
51  modname='dynredem0'; fil=fichnom
52  CALL Gather_field_u(phis,phis_glo,1)
53  IF(mpi_rank/=0) RETURN
54
55#ifdef CPP_IOIPSL
56  CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
57  CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
58#else
59! set yyears0, mmois0, jjour0 to 0,1,1 (hours is not used)
60  yyears0=0
61  mmois0=1
62  jjour0=1
63#endif       
64
65  tab_cntrl(:)  = 0.
66  tab_cntrl(1)  = REAL(iim)
67  tab_cntrl(2)  = REAL(jjm)
68  tab_cntrl(3)  = REAL(llm)
69  tab_cntrl(4)  = REAL(day_ref)
70  tab_cntrl(5)  = REAL(annee_ref)
71  tab_cntrl(6)  = rad
72  tab_cntrl(7)  = omeg
73  tab_cntrl(8)  = g
74  tab_cntrl(9)  = cpp
75  tab_cntrl(10) = kappa
76  tab_cntrl(11) = daysec
77  tab_cntrl(12) = dtvr
78  tab_cntrl(13) = etot0
79  tab_cntrl(14) = ptot0
80  tab_cntrl(15) = ztot0
81  tab_cntrl(16) = stot0
82  tab_cntrl(17) = ang0
83  tab_cntrl(18) = pa
84  tab_cntrl(19) = preff
85
86!    .....    parameters for zoom    ......   
87  tab_cntrl(20) = clon
88  tab_cntrl(21) = clat
89  tab_cntrl(22) = grossismx
90  tab_cntrl(23) = grossismy
91!
92  IF ( fxyhypb )   THEN
93    tab_cntrl(24) = 1.
94    tab_cntrl(25) = dzoomx
95    tab_cntrl(26) = dzoomy
96    tab_cntrl(27) = 0.
97    tab_cntrl(28) = taux
98    tab_cntrl(29) = tauy
99  ELSE
100    tab_cntrl(24) = 0.
101    tab_cntrl(25) = dzoomx
102    tab_cntrl(26) = dzoomy
103    tab_cntrl(27) = 0.
104    tab_cntrl(28) = 0.
105    tab_cntrl(29) = 0.
106    IF( ysinus )  tab_cntrl(27) = 1.
107  END IF
108  tab_cntrl(30) = REAL(iday_end)
109  tab_cntrl(31) = REAL(itau_dyn + itaufin)
110! start_time: start_time of simulation (not necessarily 0.)
111  tab_cntrl(32) = start_time
112
113!--- File creation
114  CALL err(NF90_CREATE(fichnom,IOR(NF90_CLOBBER,NF90_64BIT_OFFSET),nid))
115
116!--- Some global attributes
117  CALL err(NF90_PUT_ATT(nid,NF90_GLOBAL,"title","Fichier demarrage dynamique"))
118
119!--- Dimensions
120  CALL err(NF90_DEF_DIM(nid,"index", length, indexID))
121  CALL err(NF90_DEF_DIM(nid,"rlonu", iip1,   rlonuID))
122  CALL err(NF90_DEF_DIM(nid,"rlatu", jjp1,   rlatuID))
123  CALL err(NF90_DEF_DIM(nid,"rlonv", iip1,   rlonvID))
124  CALL err(NF90_DEF_DIM(nid,"rlatv", jjm,    rlatvID))
125  CALL err(NF90_DEF_DIM(nid,"sigs",  llm,        sID))
126  CALL err(NF90_DEF_DIM(nid,"sig",   llmp1,    sigID))
127  CALL err(NF90_DEF_DIM(nid,"temps", NF90_UNLIMITED, timID))
128
129!--- Define and save invariant fields
130  CALL put_var(nid,"controle","Parametres de controle" ,[indexID],tab_cntrl)
131  CALL put_var(nid,"rlonu"   ,"Longitudes des points U",[rlonuID],rlonu)
132  CALL put_var(nid,"rlatu"   ,"Latitudes des points U" ,[rlatuID],rlatu)
133  CALL put_var(nid,"rlonv"   ,"Longitudes des points V",[rlonvID],rlonv)
134  CALL put_var(nid,"rlatv"   ,"Latitudes des points V" ,[rlatvID],rlatv)
135  CALL put_var(nid,"nivsigs" ,"Numero naturel des couches s"    ,[sID]  ,nivsigs)
136  CALL put_var(nid,"nivsig"  ,"Numero naturel des couches sigma",[sigID],nivsig)
137  CALL put_var(nid,"ap"      ,"Coefficient A pour hybride"      ,[sigID],ap)
138  CALL put_var(nid,"bp"      ,"Coefficient B pour hybride"      ,[sigID],bp)
139  CALL put_var(nid,"presnivs",""                                ,[sID]  ,presnivs)
140! covariant <-> contravariant <-> natural conversion coefficients
141  CALL put_var(nid,"cu","Coefficient de passage pour U",[rlonuID,rlatuID],cu)
142  CALL put_var(nid,"cv","Coefficient de passage pour V",[rlonvID,rlatvID],cv)
143  CALL put_var(nid,"aire","Aires de chaque maille"     ,[rlonvID,rlatuID],aire)
144  CALL put_var(nid,"phisinit","Geopotentiel au sol"    ,[rlonvID,rlatuID],phis_glo)
145
146!--- Define fields saved later
147  WRITE(unites,"('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')") &
148               yyears0,mmois0,jjour0
149  CALL cre_var(nid,"temps","Temps de simulation",[timID],unites)
150  CALL cre_var(nid,"ucov" ,"Vitesse U"  ,[rlonuID,rlatuID,sID,timID])
151  CALL cre_var(nid,"vcov" ,"Vitesse V"  ,[rlonvID,rlatvID,sID,timID])
152  CALL cre_var(nid,"teta" ,"Temperature",[rlonvID,rlatuID,sID,timID])
153  DO iq=1,nqtot
154    CALL cre_var(nid,tracers(iq)%name,tracers(iq)%longName,[rlonvID,rlatuID,sID,timID])
155  END DO
156  CALL cre_var(nid,"masse","Masse d air"    ,[rlonvID,rlatuID,sID,timID])
157  CALL cre_var(nid,"ps"   ,"Pression au sol",[rlonvID,rlatuID    ,timID])
158  CALL err(NF90_CLOSE (nid))
159
160  WRITE(lunout,*)TRIM(modname)//': iim,jjm,llm,iday_end',iim,jjm,llm,iday_end
161  WRITE(lunout,*)TRIM(modname)//': rad,omeg,g,cpp,kappa',rad,omeg,g,cpp,kappa
162
163END SUBROUTINE dynredem0_loc
164!
165!-------------------------------------------------------------------------------
166
167
168!-------------------------------------------------------------------------------
169!
170SUBROUTINE dynredem1_loc(fichnom,time,vcov,ucov,teta,q,masse,ps)
171!
172!-------------------------------------------------------------------------------
173! Purpose: Write the NetCDF restart file (append).
174!-------------------------------------------------------------------------------
175  USE parallel_lmdz
176  USE mod_hallo
177  USE strings_mod, ONLY: maxlen
178  USE infotrac, ONLY: nqtot, tracers, type_trac
179  USE control_mod
180  USE netcdf,   ONLY: NF90_OPEN,  NF90_NOWRITE, NF90_GET_VAR, NF90_INQ_VARID,  &
181                      NF90_CLOSE, NF90_WRITE,   NF90_PUT_VAR, NF90_NoErr
182  USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, &
183                          err, modname, fil, msg
184  USE temps_mod, ONLY: itau_dyn, itaufin
185 
186  IMPLICIT NONE
187  include "dimensions.h"
188  include "paramet.h"
189  include "description.h"
190  include "comgeom.h"
191  include "iniprint.h"
192!===============================================================================
193! Arguments:
194  CHARACTER(LEN=*), INTENT(IN) :: fichnom              !-- FILE NAME
195  REAL, INTENT(IN)    ::  time                         !-- TIME
196  REAL, INTENT(IN)    ::  vcov(ijb_v:ije_v,llm)        !-- V COVARIANT WIND
197  REAL, INTENT(IN)    ::  ucov(ijb_u:ije_u,llm)        !-- U COVARIANT WIND
198  REAL, INTENT(IN)    ::  teta(ijb_u:ije_u,llm)        !-- POTENTIAL TEMPERATURE
199  REAL, INTENT(INOUT) ::     q(ijb_u:ije_u,llm,nqtot)  !-- TRACERS
200  REAL, INTENT(IN)    :: masse(ijb_u:ije_u,llm)        !-- MASS PER CELL
201  REAL, INTENT(IN)    ::    ps(ijb_u:ije_u)            !-- GROUND PRESSURE
202!===============================================================================
203! Local variables:
204  INTEGER :: iq, nid, vID, ierr, nid_trac, vID_trac
205  INTEGER, SAVE :: nb=0
206  INTEGER, PARAMETER :: length=100
207  REAL               :: tab_cntrl(length) ! tableau des parametres du run
208  CHARACTER(LEN=maxlen) :: var, dum
209  LOGICAL            :: lread_inca
210!===============================================================================
211
212!$OMP MASTER
213  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
214  modname='dynredem1_loc'; fil=fichnom
215  CALL err(NF90_OPEN(fil,NF90_WRITE,nid),"open",fil)
216
217!--- Write/extend time coordinate
218  nb = nb + 1
219  var="temps"
220  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
221  CALL err(NF90_PUT_VAR(nid,vID,[time]),"put",var)
222  WRITE(lunout,*)TRIM(modname)//": Saving for ", nb, time
223
224!--- Rewrite control table (itaufin undefined in dynredem0)
225  var="controle"
226  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
227  CALL err(NF90_GET_VAR(nid,vID,tab_cntrl),"get",var)
228  tab_cntrl(31)=DBLE(itau_dyn + itaufin)
229  CALL err(NF90_INQ_VARID(nid,var,vID),"inq",var)
230  CALL err(NF90_PUT_VAR(nid,vID,tab_cntrl),"put",var)
231  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
232!$OMP END MASTER
233
234!--- Save fields
235  CALL dynredem_write_u(nid,"ucov" ,ucov ,llm)
236  CALL dynredem_write_v(nid,"vcov" ,vcov ,llm)
237  CALL dynredem_write_u(nid,"teta" ,teta ,llm)
238  CALL dynredem_write_u(nid,"masse",masse,llm)
239  CALL dynredem_write_u(nid,"ps"   ,ps   ,1)
240
241!--- Tracers in file "start_trac.nc" (added by Anne)
242  lread_inca=.FALSE.
243!$OMP MASTER
244  fil="start_trac.nc"
245  IF(ANY(type_trac == ['inca','inco'])) INQUIRE(FILE=fil,EXIST=lread_inca)
246  IF(lread_inca) CALL err(NF90_OPEN(fil,NF90_NOWRITE,nid_trac),"open")
247!$OMP END MASTER
248!$OMP BARRIER
249
250!--- Save tracers
251  DO iq=1,nqtot; var=TRIM(tracers(iq)%name); ierr=-1
252    IF(lread_inca) THEN                  !--- Possibly read from "start_trac.nc"
253!$OMP MASTER     
254      fil="start_trac.nc"
255      ierr=NF90_INQ_VARID(nid_trac,var,vID_trac)
256      dum='inq'; IF(ierr==NF90_NoErr) dum='fnd'
257      WRITE(lunout,*)msg(dum,var)
258!$OMP END MASTER
259!$OMP BARRIER
260      IF(ierr==NF90_NoErr) CALL dynredem_read_u(nid_trac,var,q(:,:,iq),llm)
261    END IF
262    fil=fichnom
263    CALL dynredem_write_u(nid,var,q(:,:,iq),llm)
264  END DO
265
266!$OMP MASTER
267  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
268  CALL err(NF90_CLOSE(nid),"close")
269  fil="start_trac.nc"
270  IF(lread_inca) CALL err(NF90_CLOSE(nid_trac),"close")
271  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
272!$OMP END MASTER
273
274END SUBROUTINE dynredem1_loc
275
Note: See TracBrowser for help on using the repository browser.