1 | SUBROUTINE dynetat0(fichnom,vcov,ucov,teta,q,masse,ps,phis,time) |
---|
2 | ! |
---|
3 | !------------------------------------------------------------------------------- |
---|
4 | ! Authors: P. Le Van , L.Fairhead |
---|
5 | !------------------------------------------------------------------------------- |
---|
6 | ! Purpose: Initial state reading. |
---|
7 | !------------------------------------------------------------------------------- |
---|
8 | USE infotrac, ONLY: nqtot, tracers, niso, iqIsoPha, tnat, alpha_ideal, iH2O |
---|
9 | USE strings_mod, ONLY: maxlen, msg, strStack, real2str, int2str |
---|
10 | USE netcdf, ONLY: NF90_OPEN, NF90_NOWRITE, NF90_INQ_VARID, & |
---|
11 | NF90_CLOSE, NF90_GET_VAR, NF90_NoErr |
---|
12 | USE readTracFiles_mod, ONLY: new2oldName |
---|
13 | USE control_mod, ONLY: planet_type |
---|
14 | USE assert_eq_m, ONLY: assert_eq |
---|
15 | USE comvert_mod, ONLY: pa,preff |
---|
16 | USE comconst_mod, ONLY: cpp, daysec, dtvr, g, im, jm, kappa, lllm, omeg, rad |
---|
17 | USE logic_mod, ONLY: fxyhypb, ysinus |
---|
18 | USE serre_mod, ONLY: clon, clat, grossismx, grossismy |
---|
19 | USE temps_mod, ONLY: annee_ref, day_ini, day_ref, itau_dyn, start_time |
---|
20 | USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0 |
---|
21 | |
---|
22 | IMPLICIT NONE |
---|
23 | include "dimensions.h" |
---|
24 | include "paramet.h" |
---|
25 | include "comgeom2.h" |
---|
26 | include "description.h" |
---|
27 | include "iniprint.h" |
---|
28 | !=============================================================================== |
---|
29 | ! Arguments: |
---|
30 | CHARACTER(LEN=*), INTENT(IN) :: fichnom !--- FILE NAME |
---|
31 | REAL, INTENT(OUT) :: vcov(iip1,jjm, llm) !--- V COVARIANT WIND |
---|
32 | REAL, INTENT(OUT) :: ucov(iip1,jjp1,llm) !--- U COVARIANT WIND |
---|
33 | REAL, INTENT(OUT) :: teta(iip1,jjp1,llm) !--- POTENTIAL TEMP. |
---|
34 | REAL, INTENT(OUT) :: q(iip1,jjp1,llm,nqtot) !--- TRACERS |
---|
35 | REAL, INTENT(OUT) :: masse(iip1,jjp1,llm) !--- MASS PER CELL |
---|
36 | REAL, INTENT(OUT) :: ps(iip1,jjp1) !--- GROUND PRESSURE |
---|
37 | REAL, INTENT(OUT) :: phis(iip1,jjp1) !--- GEOPOTENTIAL |
---|
38 | !=============================================================================== |
---|
39 | ! Local variables: |
---|
40 | CHARACTER(LEN=maxlen) :: mesg, var, modname, oldVar |
---|
41 | INTEGER, PARAMETER :: length=100 |
---|
42 | INTEGER :: iq, fID, vID, idecal, iqParent, iName, iZone, iPhase |
---|
43 | REAL :: time, tab_cntrl(length) !--- RUN PARAMS TABLE |
---|
44 | !------------------------------------------------------------------------------- |
---|
45 | modname="dynetat0" |
---|
46 | |
---|
47 | !--- Initial state file opening |
---|
48 | var=fichnom |
---|
49 | CALL err(NF90_OPEN(var,NF90_NOWRITE,fID),"open",var) |
---|
50 | CALL get_var1("controle",tab_cntrl) |
---|
51 | |
---|
52 | !!! AS: idecal is a hack to be able to read planeto starts... |
---|
53 | !!! .... while keeping everything OK for LMDZ EARTH |
---|
54 | IF(planet_type=="generic") THEN |
---|
55 | CALL msg('NOTE NOTE NOTE : Planeto-like start files', modname) |
---|
56 | idecal = 4 |
---|
57 | annee_ref = 2000 |
---|
58 | ELSE |
---|
59 | CALL msg('NOTE NOTE NOTE : Earth-like start files', modname) |
---|
60 | idecal = 5 |
---|
61 | annee_ref = tab_cntrl(5) |
---|
62 | END IF |
---|
63 | im = tab_cntrl(1) |
---|
64 | jm = tab_cntrl(2) |
---|
65 | lllm = tab_cntrl(3) |
---|
66 | day_ref = tab_cntrl(4) |
---|
67 | rad = tab_cntrl(idecal+1) |
---|
68 | omeg = tab_cntrl(idecal+2) |
---|
69 | g = tab_cntrl(idecal+3) |
---|
70 | cpp = tab_cntrl(idecal+4) |
---|
71 | kappa = tab_cntrl(idecal+5) |
---|
72 | daysec = tab_cntrl(idecal+6) |
---|
73 | dtvr = tab_cntrl(idecal+7) |
---|
74 | etot0 = tab_cntrl(idecal+8) |
---|
75 | ptot0 = tab_cntrl(idecal+9) |
---|
76 | ztot0 = tab_cntrl(idecal+10) |
---|
77 | stot0 = tab_cntrl(idecal+11) |
---|
78 | ang0 = tab_cntrl(idecal+12) |
---|
79 | pa = tab_cntrl(idecal+13) |
---|
80 | preff = tab_cntrl(idecal+14) |
---|
81 | ! |
---|
82 | clon = tab_cntrl(idecal+15) |
---|
83 | clat = tab_cntrl(idecal+16) |
---|
84 | grossismx = tab_cntrl(idecal+17) |
---|
85 | grossismy = tab_cntrl(idecal+18) |
---|
86 | ! |
---|
87 | IF ( tab_cntrl(idecal+19)==1. ) THEN |
---|
88 | fxyhypb = .TRUE. |
---|
89 | ! dzoomx = tab_cntrl(25) |
---|
90 | ! dzoomy = tab_cntrl(26) |
---|
91 | ! taux = tab_cntrl(28) |
---|
92 | ! tauy = tab_cntrl(29) |
---|
93 | ELSE |
---|
94 | fxyhypb = .FALSE. |
---|
95 | ysinus = tab_cntrl(idecal+22)==1. |
---|
96 | END IF |
---|
97 | |
---|
98 | day_ini = tab_cntrl(30) |
---|
99 | itau_dyn = tab_cntrl(31) |
---|
100 | start_time = tab_cntrl(32) |
---|
101 | |
---|
102 | !------------------------------------------------------------------------------- |
---|
103 | CALL msg('rad, omeg, g, cpp, kappa = '//TRIM(strStack(real2str([rad,omeg,g,cpp,kappa]))), modname) |
---|
104 | CALL check_dim(im,iim,'im','im') |
---|
105 | CALL check_dim(jm,jjm,'jm','jm') |
---|
106 | CALL check_dim(lllm,llm,'lm','lllm') |
---|
107 | CALL get_var1("rlonu",rlonu) |
---|
108 | CALL get_var1("rlatu",rlatu) |
---|
109 | CALL get_var1("rlonv",rlonv) |
---|
110 | CALL get_var1("rlatv",rlatv) |
---|
111 | CALL get_var2("cu" ,cu) |
---|
112 | CALL get_var2("cv" ,cv) |
---|
113 | CALL get_var2("aire" ,aire) |
---|
114 | var="temps" |
---|
115 | IF(NF90_INQ_VARID(fID,var,vID)/=NF90_NoErr) THEN |
---|
116 | CALL msg('missing field <temps> ; trying with <Time>', modname) |
---|
117 | var="Time" |
---|
118 | CALL err(NF90_INQ_VARID(fID,var,vID),"inq",var) |
---|
119 | END IF |
---|
120 | CALL err(NF90_GET_VAR(fID,vID,time),"get",var) |
---|
121 | CALL get_var2("phisinit",phis) |
---|
122 | CALL get_var3("ucov",ucov) |
---|
123 | CALL get_var3("vcov",vcov) |
---|
124 | CALL get_var3("teta",teta) |
---|
125 | CALL get_var3("masse",masse) |
---|
126 | CALL get_var2("ps",ps) |
---|
127 | |
---|
128 | !--- Tracers |
---|
129 | DO iq=1,nqtot |
---|
130 | var = tracers(iq)%name |
---|
131 | oldVar = new2oldName(var) |
---|
132 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
133 | IF(NF90_INQ_VARID(fID, var, vID) == NF90_NoErr) THEN !=== REGULAR CASE |
---|
134 | CALL err(NF90_GET_VAR(fID,vID,q(:,:,:,iq)),"get",var) |
---|
135 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
136 | ELSE IF(NF90_INQ_VARID(fID, oldVar, vID) == NF90_NoErr) THEN !=== OLD NAME |
---|
137 | CALL msg('Tracer <'//TRIM(var)//'> is missing => initialized to <'//TRIM(oldVar)//'>', modname) |
---|
138 | CALL err(NF90_GET_VAR(fID,vID,q(:,:,:,iq)),"get",oldVar) |
---|
139 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
140 | #ifdef INCA |
---|
141 | ELSE IF(NF90_INQ_VARID(fID, 'OX', vID) == NF90_NoErr .AND. var == 'O3') THEN !=== INCA: OX INSTEAD OF O3 |
---|
142 | CALL msg('Tracer <O3> is missing => initialized to <OX>', modname) |
---|
143 | CALL err(NF90_GET_VAR(fID,vID,q(:,:,:,iq)),"get",'OX') |
---|
144 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
145 | #endif |
---|
146 | ELSE IF(tracers(iq)%iso_iGroup == iH2O .AND. niso > 0) THEN !=== WATER ISOTOPES |
---|
147 | iName = tracers(iq)%iso_iName |
---|
148 | iPhase = tracers(iq)%iso_iPhase |
---|
149 | iqParent = tracers(iq)%iqParent |
---|
150 | IF(tracers(iq)%iso_iZone == 0) THEN |
---|
151 | CALL msg('Tracer <'//TRIM(var)//'> is missing => initialized with a simplified Rayleigh distillation law.', modname) |
---|
152 | q(:,:,:,iq) = q(:,:,:,iqParent)*tnat(iName)*(q(:,:,:,iqParent)/30.e-3)**(alpha_ideal(iName)-1.) |
---|
153 | ELSE |
---|
154 | CALL msg('Tracer <'//TRIM(var)//'> is missing => initialized to its parent isotope concentration.', modname) |
---|
155 | q(:,:,:,iq) = q(:,:,:,iqIsoPha(iName,iPhase)) |
---|
156 | END IF |
---|
157 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
158 | ELSE !=== MISSING: SET TO 0 |
---|
159 | CALL msg('Tracer <'//TRIM(var)//'> is missing => initialized to zero', modname) |
---|
160 | q(:,:,:,iq)=0. |
---|
161 | !-------------------------------------------------------------------------------------------------------------------------- |
---|
162 | END IF |
---|
163 | END DO |
---|
164 | |
---|
165 | CALL err(NF90_CLOSE(fID),"close",fichnom) |
---|
166 | day_ini=day_ini+INT(time) |
---|
167 | time=time-INT(time) |
---|
168 | |
---|
169 | |
---|
170 | CONTAINS |
---|
171 | |
---|
172 | |
---|
173 | SUBROUTINE check_dim(n1,n2,str1,str2) |
---|
174 | INTEGER, INTENT(IN) :: n1, n2 |
---|
175 | CHARACTER(LEN=*), INTENT(IN) :: str1, str2 |
---|
176 | CHARACTER(LEN=maxlen) :: s1, s2 |
---|
177 | IF(n1/=n2) CALL abort_gcm(TRIM(modname), 'value of "'//TRIM(str1)//'" = '//TRIM(int2str(n1))// & |
---|
178 | ' read in starting file differs from gcm value of "'//TRIM(str2)//'" = '//TRIM(int2str(n2)), 1) |
---|
179 | END SUBROUTINE check_dim |
---|
180 | |
---|
181 | |
---|
182 | SUBROUTINE get_var1(var,v) |
---|
183 | CHARACTER(LEN=*), INTENT(IN) :: var |
---|
184 | REAL, INTENT(OUT) :: v(:) |
---|
185 | CALL err(NF90_INQ_VARID(fID,var,vID),"inq",var) |
---|
186 | CALL err(NF90_GET_VAR(fID,vID,v),"get",var) |
---|
187 | END SUBROUTINE get_var1 |
---|
188 | |
---|
189 | |
---|
190 | SUBROUTINE get_var2(var,v) |
---|
191 | CHARACTER(LEN=*), INTENT(IN) :: var |
---|
192 | REAL, INTENT(OUT) :: v(:,:) |
---|
193 | CALL err(NF90_INQ_VARID(fID,var,vID),"inq",var) |
---|
194 | CALL err(NF90_GET_VAR(fID,vID,v),"get",var) |
---|
195 | END SUBROUTINE get_var2 |
---|
196 | |
---|
197 | |
---|
198 | SUBROUTINE get_var3(var,v) |
---|
199 | CHARACTER(LEN=*), INTENT(IN) :: var |
---|
200 | REAL, INTENT(OUT) :: v(:,:,:) |
---|
201 | CALL err(NF90_INQ_VARID(fID,var,vID),"inq",var) |
---|
202 | CALL err(NF90_GET_VAR(fID,vID,v),"get",var) |
---|
203 | END SUBROUTINE get_var3 |
---|
204 | |
---|
205 | |
---|
206 | SUBROUTINE err(ierr,typ,nam) |
---|
207 | INTEGER, INTENT(IN) :: ierr !--- NetCDF ERROR CODE |
---|
208 | CHARACTER(LEN=*), INTENT(IN) :: typ !--- TYPE OF OPERATION |
---|
209 | CHARACTER(LEN=*), INTENT(IN) :: nam !--- FIELD/FILE NAME |
---|
210 | IF(ierr==NF90_NoERR) RETURN |
---|
211 | SELECT CASE(typ) |
---|
212 | CASE('inq'); mesg="Field <"//TRIM(nam)//"> is missing" |
---|
213 | CASE('get'); mesg="Reading failed for <"//TRIM(nam)//">" |
---|
214 | CASE('open'); mesg="File opening failed for <"//TRIM(nam)//">" |
---|
215 | CASE('close'); mesg="File closing failed for <"//TRIM(nam)//">" |
---|
216 | END SELECT |
---|
217 | CALL ABORT_gcm(TRIM(modname),TRIM(mesg),ierr) |
---|
218 | END SUBROUTINE err |
---|
219 | |
---|
220 | END SUBROUTINE dynetat0 |
---|