Context Navigation

scm.F90 @ 4287

Last change on this file since 4287 was 3851, checked in by dcugnet, 4 years ago
Update the branch to the current trunk.
File size: 39.4 KB

Line
1	SUBROUTINE scm
2
3	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
4	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
5	clwcon, detr_therm, &
6	qsol, fevap, z0m, z0h, agesno, &
7	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
8	falb_dir, falb_dif, &
9	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
10	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
11	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
12	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
13	wake_deltaq, wake_deltat, wake_s, wake_dens, &
14	zgam, zmax0, zmea, zpic, zsig, &
15	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
16	prlw_ancien, prsw_ancien, prw_ancien, &
17	u10m,v10m,ale_wake,ale_bl_stat
18
19
20	USE dimphy
21	USE surface_data, only : type_ocean,ok_veget
22	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
23	pbl_surface_final
24	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
25
26	USE infotrac ! new
27	USE control_mod
28	USE indice_sol_mod
29	USE phyaqua_mod
30	! USE mod_1D_cases_read
31	USE mod_1D_cases_read_std
32	!USE mod_1D_amma_read
33	USE print_control_mod, ONLY: lunout, prt_level
34	USE iniphysiq_mod, ONLY: iniphysiq
35	USE mod_const_mpi, ONLY: comm_lmdz
36	USE physiq_mod, ONLY: physiq
37	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
38	preff, aps, bps, pseudoalt, scaleheight
39	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
40	itau_dyn, itau_phy, start_time, year_len
41	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
42
43	implicit none
44	#include "dimensions.h"
45	#include "YOMCST.h"
46	!!#include "control.h"
47	#include "clesphys.h"
48	#include "dimsoil.h"
49	!#include "indicesol.h"
50
51	#include "compar1d.h"
52	#include "flux_arp.h"
53	#include "date_cas.h"
54	#include "tsoilnudge.h"
55	#include "fcg_gcssold.h"
56	#include "compbl.h"
57
58	!=====================================================================
59	! DECLARATIONS
60	!=====================================================================
61
62	#undef OUTPUT_PHYS_SCM
63
64	!---------------------------------------------------------------------
65	! Externals
66	!---------------------------------------------------------------------
67	external fq_sat
68	real fq_sat
69
70	!---------------------------------------------------------------------
71	! Arguments d' initialisations de la physique (USER DEFINE)
72	!---------------------------------------------------------------------
73
74	integer, parameter :: ngrid=1
75	real :: zcufi = 1.
76	real :: zcvfi = 1.
77	real :: fnday
78	real :: day, daytime
79	real :: day1
80	real :: heure
81	integer :: jour
82	integer :: mois
83	integer :: an
84
85	!---------------------------------------------------------------------
86	! Declarations related to forcing and initial profiles
87	!---------------------------------------------------------------------
88
89	integer :: kmax = llm
90	integer llm700,nq1,nq2
91	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
92	real timestep, frac
93	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
94	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
95	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
96	real dqtdxls(nlev_max),dqtdyls(nlev_max)
97	real dqtdtls(nlev_max),thlpcar(nlev_max)
98	real qprof(nlev_max,nqmx)
99
100	! integer :: forcing_type
101	logical :: forcing_les = .false.
102	logical :: forcing_armcu = .false.
103	logical :: forcing_rico = .false.
104	logical :: forcing_radconv = .false.
105	logical :: forcing_toga = .false.
106	logical :: forcing_twpice = .false.
107	logical :: forcing_amma = .false.
108	logical :: forcing_dice = .false.
109	logical :: forcing_gabls4 = .false.
110
111	logical :: forcing_GCM2SCM = .false.
112	logical :: forcing_GCSSold = .false.
113	logical :: forcing_sandu = .false.
114	logical :: forcing_astex = .false.
115	logical :: forcing_fire = .false.
116	logical :: forcing_case = .false.
117	logical :: forcing_case2 = .false.
118	logical :: forcing_SCM = .false.
119
120	!flag forcings
121	logical :: nudge_wind=.true.
122	logical :: nudge_thermo=.false.
123	logical :: cptadvw=.true.
124
125
126	!=====================================================================
127	! DECLARATIONS FOR EACH CASE
128	!=====================================================================
129	!
130	#include "1D_decl_cases.h"
131	!
132	!---------------------------------------------------------------------
133	! Declarations related to nudging
134	!---------------------------------------------------------------------
135	integer :: nudge_max
136	parameter (nudge_max=9)
137	integer :: inudge_RHT=1
138	integer :: inudge_UV=2
139	logical :: nudge(nudge_max)
140	real :: t_targ(llm)
141	real :: rh_targ(llm)
142	real :: u_targ(llm)
143	real :: v_targ(llm)
144	!
145	!---------------------------------------------------------------------
146	! Declarations related to vertical discretization:
147	!---------------------------------------------------------------------
148	real :: pzero=1.e5
149	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
150	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
151
152	!---------------------------------------------------------------------
153	! Declarations related to variables
154	!---------------------------------------------------------------------
155
156	real :: phi(llm)
157	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
158	REAL rot(1, llm) ! relative vorticity, in s-1
159	real :: rlat_rad(1),rlon_rad(1)
160	real :: omega(llm),omega2(llm),rho(llm+1)
161	real :: ug(llm),vg(llm),fcoriolis
162	real :: sfdt, cfdt
163	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
164	real :: w_adv(llm),z_adv(llm)
165	real :: d_t_vert_adv(llm),d_u_vert_adv(llm),d_v_vert_adv(llm)
166	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
167	real :: d_u_nudge(llm),d_v_nudge(llm)
168	! real :: d_u_adv(llm),d_v_adv(llm)
169	real :: d_u_age(llm),d_v_age(llm)
170	real :: alpha
171	real :: ttt
172
173	REAL, ALLOCATABLE, DIMENSION(:,:):: q
174	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
175	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_vert_adv
176	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
177	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
178	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
179
180	!---------------------------------------------------------------------
181	! Initialization of surface variables
182	!---------------------------------------------------------------------
183	real :: run_off_lic_0(1)
184	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
185	real :: tsoil(1,nsoilmx,nbsrf)
186	! real :: agesno(1,nbsrf)
187
188	!---------------------------------------------------------------------
189	! Call to phyredem
190	!---------------------------------------------------------------------
191	logical :: ok_writedem =.true.
192	real :: sollw_in = 0.
193	real :: solsw_in = 0.
194
195	!---------------------------------------------------------------------
196	! Call to physiq
197	!---------------------------------------------------------------------
198	logical :: firstcall=.true.
199	logical :: lastcall=.false.
200	real :: phis(1) = 0.0
201	real :: dpsrf(1)
202
203	!---------------------------------------------------------------------
204	! Initializations of boundary conditions
205	!---------------------------------------------------------------------
206	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
207	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
208	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
209	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
210	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
211	real, allocatable :: phy_ice (:) ! Fraction de glace
212	real, allocatable :: phy_fter(:) ! Fraction de terre
213	real, allocatable :: phy_foce(:) ! Fraction de ocean
214	real, allocatable :: phy_fsic(:) ! Fraction de glace
215	real, allocatable :: phy_flic(:) ! Fraction de glace
216
217	!---------------------------------------------------------------------
218	! Fichiers et d'autres variables
219	!---------------------------------------------------------------------
220	integer :: k,l,i,it=1,mxcalc
221	integer :: nsrf
222	integer jcode
223	INTEGER read_climoz
224	!
225	integer :: it_end ! iteration number of the last call
226	!Al1,plev,play,phi,phis,presnivs,
227	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
228	data ecrit_slab_oc/-1/
229	!
230	! if flag_inhib_forcing = 0, tendencies of forcing are added
231	! <> 0, tendencies of forcing are not added
232	INTEGER :: flag_inhib_forcing = 0
233
234
235	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
236
237	!=====================================================================
238	! INITIALIZATIONS
239	!=====================================================================
240	du_phys(:)=0.
241	dv_phys(:)=0.
242	dt_phys(:)=0.
243	d_t_vert_adv(:)=0.
244	d_u_vert_adv(:)=0.
245	d_v_vert_adv(:)=0.
246	dt_cooling(:)=0.
247	d_t_adv(:)=0.
248	d_t_nudge(:)=0.
249	d_u_nudge(:)=0.
250	d_v_nudge(:)=0.
251	d_u_adv(:)=0.
252	d_v_adv(:)=0.
253	d_u_age(:)=0.
254	d_v_age(:)=0.
255
256
257	! Initialization of Common turb_forcing
258	dtime_frcg = 0.
259	Turb_fcg_gcssold=.false.
260	hthturb_gcssold = 0.
261	hqturb_gcssold = 0.
262
263
264
265
266	!---------------------------------------------------------------------
267	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
268	!---------------------------------------------------------------------
269	call conf_unicol
270	!Al1 moves this gcssold var from common fcg_gcssold to
271	Turb_fcg_gcssold = xTurb_fcg_gcssold
272	! --------------------------------------------------------------------
273	close(1)
274	write(,) 'lmdz1d.def lu => unicol.def'
275
276	forcing_SCM = .true.
277	year_ini_cas=1997
278	! It is possible that those parameters are run twice.
279	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
280
281
282	call getin('anneeref',year_ini_cas)
283	call getin('dayref',day_deb)
284	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
285	call getin('time_ini',heure_ini_cas)
286
287	print*,'NATURE DE LA SURFACE ',nat_surf
288	!
289	! Initialization of the logical switch for nudging
290
291	jcode = iflag_nudge
292	do i = 1,nudge_max
293	nudge(i) = mod(jcode,10) .ge. 1
294	jcode = jcode/10
295	enddo
296	!-----------------------------------------------------------------------
297	! Definition of the run
298	!-----------------------------------------------------------------------
299
300	call conf_gcm( 99, .TRUE. )
301
302	!-----------------------------------------------------------------------
303	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
304	phy_nat(:)=0.0
305	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
306	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
307	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
308	phy_bil(:)=1.0
309	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
310	allocate( phy_ice (year_len)) ! Fraction de glace
311	phy_ice(:)=0.0
312	allocate( phy_fter(year_len)) ! Fraction de terre
313	phy_fter(:)=0.0
314	allocate( phy_foce(year_len)) ! Fraction de ocean
315	phy_foce(:)=0.0
316	allocate( phy_fsic(year_len)) ! Fraction de glace
317	phy_fsic(:)=0.0
318	allocate( phy_flic(year_len)) ! Fraction de glace
319	phy_flic(:)=0.0
320
321
322	!-----------------------------------------------------------------------
323	! Choix du calendrier
324	! -------------------
325
326	! calend = 'earth_365d'
327	if (calend == 'earth_360d') then
328	call ioconf_calendar('360d')
329	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
330	else if (calend == 'earth_365d') then
331	call ioconf_calendar('noleap')
332	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
333	else if (calend == 'earth_366d') then
334	call ioconf_calendar('all_leap')
335	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
336	else if (calend == 'gregorian') then
337	stop 'gregorian calend should not be used by normal user'
338	call ioconf_calendar('gregorian') ! not to be used by normal users
339	write(,)'CALENDRIER CHOISI: Gregorien'
340	else
341	write (,) 'ERROR : unknown calendar ', calend
342	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
343	endif
344	!-----------------------------------------------------------------------
345	!
346	!c Date :
347	! La date est supposee donnee sous la forme [annee, numero du jour dans
348	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
349	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
350	! Le numero du jour est dans "day". L heure est traitee separement.
351	! La date complete est dans "daytime" (l'unite est le jour).
352
353
354	if (nday>0) then
355	fnday=nday
356	else
357	fnday=-nday/float(day_step)
358	endif
359	print *,'fnday=',fnday
360	! start_time doit etre en FRACTION DE JOUR
361	start_time=time_ini/24.
362
363	annee_ref = anneeref
364	mois = 1
365	day_ref = dayref
366	heure = 0.
367	itau_dyn = 0
368	itau_phy = 0
369	call ymds2ju(annee_ref,mois,day_ref,heure,day)
370	day_ini = int(day)
371	day_end = day_ini + int(fnday)
372
373	! Convert the initial date to Julian day
374	day_ini_cas=day_deb
375	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
376	call ymds2ju &
377	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
378	& ,day_ju_ini_cas)
379	print*,'time case 2',day_ini_cas,day_ju_ini_cas
380	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
381
382	! Print out the actual date of the beginning of the simulation :
383	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
384	print *,' Time of beginning : ', &
385	& year_print, month_print, day_print, sec_print
386
387	!---------------------------------------------------------------------
388	! Initialization of dimensions, geometry and initial state
389	!---------------------------------------------------------------------
390	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
391	! but we still need to initialize dimphy module (klon,klev,etc.) here.
392	call init_dimphy1D(1,llm)
393	call suphel
394	call infotrac_init
395
396	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
397	allocate(q(llm,nqtot)) ; q(:,:)=0.
398	allocate(dq(llm,nqtot))
399	allocate(d_q_vert_adv(llm,nqtot))
400	allocate(d_q_adv(llm,nqtot))
401	allocate(d_q_nudge(llm,nqtot))
402	! allocate(d_th_adv(llm))
403
404	q(:,:) = 0.
405	dq(:,:) = 0.
406	d_q_vert_adv(:,:) = 0.
407	d_q_adv(:,:) = 0.
408	d_q_nudge(:,:) = 0.
409
410	!
411	! No ozone climatology need be read in this pre-initialization
412	! (phys_state_var_init is called again in physiq)
413	read_climoz = 0
414	nsw=6
415
416	call phys_state_var_init(read_climoz)
417
418	if (ngrid.ne.klon) then
419	print*,'stop in inifis'
420	print*,'Probleme de dimensions :'
421	print*,'ngrid = ',ngrid
422	print*,'klon = ',klon
423	stop
424	endif
425	!!!=====================================================================
426	!!! Feedback forcing values for Gateaux differentiation (al1)
427	!!!=====================================================================
428	!!
429	qsol = qsolinp
430	qsurf = fq_sat(tsurf,psurf/100.)
431	day1= day_ini
432	time=daytime-day
433	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
434	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
435
436	!
437	!! mpl et jyg le 22/08/2012 :
438	!! pour que les cas a flux de surface imposes marchent
439	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
440	fsens=-wtsurfrcpdrho(1)
441	flat=-wqsurfrlvttrho(1)
442	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
443	ENDIF
444	print*,'Flux sol ',fsens,flat
445
446	! Vertical discretization and pressure levels at half and mid levels:
447
448	pa = 5e4
449	!! preff= 1.01325e5
450	preff = psurf
451	IF (ok_old_disvert) THEN
452	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
453	print *,'On utilise disvert0'
454	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
455	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
456	scaleheight=8.
457	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
458	ELSE
459	call disvert()
460	print *,'On utilise disvert'
461	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
462	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
463	ENDIF
464
465	sig_s=presnivs/preff
466	plev =ap+bp*psurf
467	play = 0.5*(plev(1:llm)+plev(2:llm+1))
468	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles.
469
470	IF (forcing_type .eq. 59) THEN
471	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
472	write(,) '***********************'
473	do l = 1, llm
474	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
475	if (trouve_700 .and. play(l).le.70000) then
476	llm700=l
477	print *,'llm700,play=',llm700,play(l)/100.
478	trouve_700= .false.
479	endif
480	enddo
481	write(,) '***********************'
482	ENDIF
483
484	!
485	!=====================================================================
486	! EVENTUALLY, READ FORCING DATA :
487	!=====================================================================
488
489	#include "1D_read_forc_cases.h"
490	print,'A d_t_adv ',d_t_adv(1:20)86400
491
492	if (forcing_GCM2SCM) then
493	write (,) 'forcing_GCM2SCM not yet implemented'
494	stop 'in initialization'
495	endif ! forcing_GCM2SCM
496
497	print*,'mxcalc=',mxcalc
498	! print*,'zlay=',zlay(mxcalc)
499	! print*,'play=',play(mxcalc)
500
501	!! When surface temperature is forced
502	tg= tsurf ! surface T used in read_tsurf1d
503
504
505	!=====================================================================
506	! Initialisation de la physique :
507	!=====================================================================
508
509	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
510	!
511	! day_step, iphysiq lus dans gcm.def ci-dessus
512	! timestep: calcule ci-dessous from rday et day_step
513	! ngrid=1
514	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
515	! rday: defini dans suphel.F (86400.)
516	! day_ini: lu dans run.def (dayref)
517	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
518	! airefi,zcufi,zcvfi initialises au debut de ce programme
519	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
520
521
522	day_step = float(nsplit_phys)*day_step/float(iphysiq)
523	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
524	timestep =rday/day_step
525	dtime_frcg = timestep
526	!
527	zcufi=airefi
528	zcvfi=airefi
529	!
530	rlat_rad(1)=xlat*rpi/180.
531	rlon_rad(1)=xlon*rpi/180.
532
533	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
534	year_len_phys_cal_mod=year_len
535
536	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
537	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
538	! with '0.' when necessary
539
540	call iniphysiq(iim,jjm,llm, &
541	1,comm_lmdz, &
542	rday,day_ini,timestep, &
543	(/rlat_rad(1),0./),(/0./), &
544	(/0.,0./),(/rlon_rad(1),0./), &
545	(/ (/airefi,0./),(/0.,0./) /), &
546	(/zcufi,0.,0.,0./), &
547	(/zcvfi,0./), &
548	ra,rg,rd,rcpd,1)
549	print*,'apres iniphysiq'
550
551	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
552	co2_ppm= 330.0
553	solaire=1370.0
554
555	! Ecriture du startphy avant le premier appel a la physique.
556	! On le met juste avant pour avoir acces a tous les champs
557
558	if (ok_writedem) then
559
560	!--------------------------------------------------------------------------
561	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
562	! need : qsol fder snow qsurf evap rugos agesno ftsoil
563	!--------------------------------------------------------------------------
564
565	type_ocean = "force"
566	run_off_lic_0(1) = restart_runoff
567	call fonte_neige_init(run_off_lic_0)
568
569	fder=0.
570	snsrf(1,:)=snowmass ! masse de neige des sous surface
571	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
572	fevap=0.
573	z0m(1,:)=rugos ! couverture de neige des sous surface
574	z0h(1,:)=rugosh ! couverture de neige des sous surface
575	agesno = xagesno
576	tsoil(:,:,:)=tsurf
577	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
578	! tsoil(1,1,1)=299.18
579	! tsoil(1,2,1)=300.08
580	! tsoil(1,3,1)=301.88
581	! tsoil(1,4,1)=305.48
582	! tsoil(1,5,1)=308.00
583	! tsoil(1,6,1)=308.00
584	! tsoil(1,7,1)=308.00
585	! tsoil(1,8,1)=308.00
586	! tsoil(1,9,1)=308.00
587	! tsoil(1,10,1)=308.00
588	! tsoil(1,11,1)=308.00
589	!-----------------------------------------------------------------------
590	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
591
592	!------------------ prepare limit conditions for limit.nc -----------------
593	!-- Ocean force
594
595	print*,'avant phyredem'
596	pctsrf(1,:)=0.
597	if (nat_surf.eq.0.) then
598	pctsrf(1,is_oce)=1.
599	pctsrf(1,is_ter)=0.
600	pctsrf(1,is_lic)=0.
601	pctsrf(1,is_sic)=0.
602	else if (nat_surf .eq. 1) then
603	pctsrf(1,is_oce)=0.
604	pctsrf(1,is_ter)=1.
605	pctsrf(1,is_lic)=0.
606	pctsrf(1,is_sic)=0.
607	else if (nat_surf .eq. 2) then
608	pctsrf(1,is_oce)=0.
609	pctsrf(1,is_ter)=0.
610	pctsrf(1,is_lic)=1.
611	pctsrf(1,is_sic)=0.
612	else if (nat_surf .eq. 3) then
613	pctsrf(1,is_oce)=0.
614	pctsrf(1,is_ter)=0.
615	pctsrf(1,is_lic)=0.
616	pctsrf(1,is_sic)=1.
617
618	end if
619
620
621	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
622	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
623
624	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
625	zpic = zpicinp
626	ftsol=tsurf
627	falb_dir=albedo
628	falb_dif=albedo
629	rugoro=rugos
630	t_ancien(1,:)=temp(:)
631	q_ancien(1,:)=q(:,1)
632	ql_ancien = 0.
633	qs_ancien = 0.
634	prlw_ancien = 0.
635	prsw_ancien = 0.
636	prw_ancien = 0.
637	!jyg<
638	! Etienne: comment those lines since now the TKE is inialized in 1D_read_forc_cases
639	!! pbl_tke(:,:,:)=1.e-8
640	! pbl_tke(:,:,:)=0.
641	! pbl_tke(:,2,:)=1.e-2
642	!>jyg
643	rain_fall=0.
644	snow_fall=0.
645	solsw=0.
646	sollw=0.
647	sollwdown=rsigmatsurf*4
648	radsol=0.
649	rnebcon=0.
650	ratqs=0.
651	clwcon=0.
652	zmax0 = 0.
653	zmea=0.
654	zstd=0.
655	zsig=0.
656	zgam=0.
657	zval=0.
658	zthe=0.
659	sig1=0.
660	w01=0.
661	wake_cstar = 0.
662	wake_deltaq = 0.
663	wake_deltat = 0.
664	wake_delta_pbl_TKE(:,:,:) = 0.
665	delta_tsurf = 0.
666	wake_fip = 0.
667	wake_pe = 0.
668	wake_s = 0.
669	wake_dens = 0.
670	ale_bl = 0.
671	ale_bl_trig = 0.
672	alp_bl = 0.
673	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
674	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
675	entr_therm = 0.
676	detr_therm = 0.
677	f0 = 0.
678	fm_therm = 0.
679	u_ancien(1,:)=u(:)
680	v_ancien(1,:)=v(:)
681
682	u10m=0.
683	v10m=0.
684	ale_wake=0.
685	ale_bl_stat=0.
686
687	!------------------------------------------------------------------------
688	! Make file containing restart for the physics (startphy.nc)
689	!
690	! NB: List of the variables to be written by phyredem (via put_field):
691	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
692	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
693	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
694	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
695	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
696	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
697	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
698	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
699	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
700	!
701	! NB2: The content of the startphy.nc file depends on some flags defined in
702	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
703	! to be set at some arbitratry convenient values.
704	!------------------------------------------------------------------------
705	!Al1 =============== restart option ======================================
706	if (.not.restart) then
707	iflag_pbl = 5
708	call phyredem ("startphy.nc")
709	else
710	! (desallocations)
711	print*,'callin surf final'
712	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
713	print*,'after surf final'
714	CALL fonte_neige_final(run_off_lic_0)
715	endif
716
717	ok_writedem=.false.
718	print*,'apres phyredem'
719
720	endif ! ok_writedem
721
722	!------------------------------------------------------------------------
723	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
724	! --------------------------------------------------
725	! NB: List of the variables to be written in limit.nc
726	! (by writelim.F, subroutine of 1DUTILS.h):
727	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
728	! phy_fter,phy_foce,phy_flic,phy_fsic)
729	!------------------------------------------------------------------------
730	do i=1,year_len
731	phy_nat(i) = nat_surf
732	phy_alb(i) = albedo
733	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
734	phy_rug(i) = rugos
735	phy_fter(i) = pctsrf(1,is_ter)
736	phy_foce(i) = pctsrf(1,is_oce)
737	phy_fsic(i) = pctsrf(1,is_sic)
738	phy_flic(i) = pctsrf(1,is_lic)
739	enddo
740
741	! fabrication de limit.nc
742	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
743	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
744
745
746	call phys_state_var_end
747	!Al1
748	if (restart) then
749	print*,'call to restart dyn 1d'
750	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
751	& u,v,temp,q,omega2)
752
753	print*,'fnday,annee_ref,day_ref,day_ini', &
754	& fnday,annee_ref,day_ref,day_ini
755	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
756	day = day_ini
757	day_end = day_ini + nday
758	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
759
760	! Print out the actual date of the beginning of the simulation :
761	call ju2ymds(daytime, an, mois, jour, heure)
762	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
763
764	day = int(daytime)
765	time=daytime-day
766
767	print,'*** intialised fields from restart1dyn *****'
768	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
769	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
770	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis(1)
771	! raz for safety
772	do l=1,llm
773	d_q_vert_adv(l,1) = 0.
774	enddo
775	endif
776	!====================== end restart =================================
777	IF (ecrit_slab_oc.eq.1) then
778	open(97,file='div_slab.dat',STATUS='UNKNOWN')
779	elseif (ecrit_slab_oc.eq.0) then
780	open(97,file='div_slab.dat',STATUS='OLD')
781	endif
782	!
783	!=====================================================================
784	#ifdef OUTPUT_PHYS_SCM
785	CALL iophys_ini
786	#endif
787
788	!=====================================================================
789	! START OF THE TEMPORAL LOOP :
790	!=====================================================================
791
792	it_end = nint(fnday*day_step)
793	do while(it.le.it_end)
794
795	if (prt_level.ge.1) then
796	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
797	& it,day,time,it_end,day_step
798	print*,'PAS DE TEMPS ',timestep
799	endif
800	if (it.eq.it_end) lastcall=.True.
801
802	!---------------------------------------------------------------------
803	! Interpolation of forcings in time and onto model levels
804	!---------------------------------------------------------------------
805
806	#include "1D_interp_cases.h"
807
808	!---------------------------------------------------------------------
809	! Geopotential :
810	!---------------------------------------------------------------------
811	! phis(1)=zsurf*RG
812	! phi(1)=phis(1)+RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
813	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
814
815	do l = 1, llm-1
816	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
817	& (play(l)-play(l+1))/(play(l)+play(l+1))
818	enddo
819
820
821	!---------------------------------------------------------------------
822	! Vertical advection
823	!---------------------------------------------------------------------
824
825	IF ( forc_w+forc_omega > 0 ) THEN
826
827	IF ( forc_w == 1 ) THEN
828	w_adv=w_mod_cas
829	z_adv=phi/RG
830	ELSE
831	w_adv=omega
832	z_adv=play
833	ENDIF
834
835	teta=temp(pzero/play)*rkappa
836	do l=2,llm-1
837	! vertical tendencies computed as d X / d t = -W d X / d z
838	d_u_vert_adv(l)=-w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
839	d_v_vert_adv(l)=-w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
840	! d theta / dt = -W d theta / d z, transformed into d temp / d t dividing by (pzero/play(l))**rkappa
841	d_t_vert_adv(l)=-w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)) / (pzero/play(l))*rkappa
842	d_q_vert_adv(l,1)=-w_adv(l)*(q(l+1,1)-q(l-1,1))/(z_adv(l+1)-z_adv(l-1))
843	enddo
844	d_u_adv(:)=d_u_adv(:)+d_u_vert_adv(:)
845	d_v_adv(:)=d_v_adv(:)+d_v_vert_adv(:)
846	d_t_adv(:)=d_t_adv(:)+d_t_vert_adv(:)
847	d_q_adv(:,1)=d_q_adv(:,1)+d_q_vert_adv(:,1)
848
849	print*,'OMEGA ',w_adv(10),z_adv(10)
850
851	ENDIF
852
853	!---------------------------------------------------------------------
854	! Listing output for debug prt_level>=1
855	!---------------------------------------------------------------------
856	if (prt_level>=1) then
857	print *,' avant physiq : -------- day time ',day,time
858	write(,) 'firstcall,lastcall,phis', &
859	& firstcall,lastcall,phis
860	end if
861	if (prt_level>=5) then
862	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
863	& 'presniv','plev','play','phi'
864	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
865	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
866	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
867	& 'presniv','u','v','temp','q1','q2','omega2'
868	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
869	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
870	endif
871
872	!---------------------------------------------------------------------
873	! Call physiq :
874	!---------------------------------------------------------------------
875	call physiq(ngrid,llm, &
876	firstcall,lastcall,timestep, &
877	plev,play,phi,phis,presnivs, &
878	u,v, rot, temp,q,omega2, &
879	du_phys,dv_phys,dt_phys,dq,dpsrf)
880	firstcall=.false.
881
882	!---------------------------------------------------------------------
883	! Listing output for debug
884	!---------------------------------------------------------------------
885	if (prt_level>=5) then
886	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
887	& 'presniv','plev','play','phi'
888	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
889	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
890	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
891	& 'presniv','u','v','temp','q1','q2','omega2'
892	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
893	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
894	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
895	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
896	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
897	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
898	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
899	write(,) 'dpsrf',dpsrf
900	endif
901	!---------------------------------------------------------------------
902	! Add physical tendencies :
903	!---------------------------------------------------------------------
904
905	fcoriolis=2.sin(rpixlat/180.)*romega
906
907	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
908	fcoriolis, xlat,mxcalc
909
910	!---------------------------------------------------------------------
911	! Geostrophic forcing
912	!---------------------------------------------------------------------
913
914	IF ( forc_geo == 0 ) THEN
915	d_u_age(1:mxcalc)=0.
916	d_v_age(1:mxcalc)=0.
917	ELSE
918	sfdt = sin(0.5fcoriolistimestep)
919	cfdt = cos(0.5fcoriolistimestep)
920
921	d_u_age(1:mxcalc)= -2.sfdt/timestep &
922	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
923	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
924	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
925	!
926	d_v_age(1:mxcalc)= -2.sfdt/timestep &
927	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
928	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
929	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
930	ENDIF
931	!
932	!---------------------------------------------------------------------
933	! Nudging
934	!---------------------------------------------------------------------
935	d_t_nudge(:) = 0.
936	d_u_nudge(:) = 0.
937	d_v_nudge(:) = 0.
938	d_q_nudge(:,:) = 0.
939	DO l=1,llm
940	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
941	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
942	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
943	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
944	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
945	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
946	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
947	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
948	ENDDO
949
950	!---------------------------------------------------------------------
951	! Optional outputs
952	!---------------------------------------------------------------------
953	#ifdef OUTPUT_PHYS_SCM
954	CALL iophys_ecrit('w_adv',klev,'w_adv','K/day',w_adv)
955	CALL iophys_ecrit('z_adv',klev,'z_adv','K/day',z_adv)
956	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
957	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*d_t_vert_adv)
958	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
959	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
960	CALL iophys_ecrit('u',klev,'u','m/s',u)
961	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
962	CALL iophys_ecrit('v',klev,'v','m/s',v)
963	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
964	CALL iophys_ecrit('temp',klev,'temp','K',temp)
965	CALL iophys_ecrit('tempnud',klev,'temp_nudg_mod_cas','K',temp_nudg_mod_cas)
966	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
967	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
968	#endif
969
970	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
971
972	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
973	& du_phys(1:mxcalc) &
974	& +d_u_age(1:mxcalc)+d_u_adv(1:mxcalc) &
975	& +d_u_nudge(1:mxcalc) )
976	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
977	& dv_phys(1:mxcalc) &
978	& +d_v_age(1:mxcalc)+d_v_adv(1:mxcalc) &
979	& +d_v_nudge(1:mxcalc) )
980	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
981	& dq(1:mxcalc,:) &
982	& +d_q_adv(1:mxcalc,:) &
983	& +d_q_nudge(1:mxcalc,:) )
984
985	if (prt_level.ge.3) then
986	print *, &
987	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
988	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
989	print* ,'dv_phys=',dv_phys
990	print* ,'d_v_age=',d_v_age
991	print* ,'d_v_adv=',d_v_adv
992	print* ,'d_v_nudge=',d_v_nudge
993	print*, v
994	print*, vg
995	endif
996
997	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
998	& dt_phys(1:mxcalc) &
999	& +d_t_adv(1:mxcalc) &
1000	& +d_t_nudge(1:mxcalc) &
1001	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1002
1003
1004	!=======================================================================
1005	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1006	!=======================================================================
1007
1008	teta=temp(pzero/play)*rkappa
1009
1010	!---------------------------------------------------------------------
1011	! Nudge soil temperature if requested
1012	!---------------------------------------------------------------------
1013
1014	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1015	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1016	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1017	ENDIF
1018
1019	!---------------------------------------------------------------------
1020	! Add large-scale tendencies (advection, etc) :
1021	!---------------------------------------------------------------------
1022
1023	!cc nrlmd
1024	!cc tmpvar=teta
1025	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1026	!cc
1027	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1028	!cc tmpvar(:)=q(:,1)
1029	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1030	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1031	!cc tmpvar(:)=q(:,2)
1032	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1033	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1034
1035	END IF ! end if tendency of tendency should be added
1036
1037	!---------------------------------------------------------------------
1038	! Air temperature :
1039	!---------------------------------------------------------------------
1040	if (lastcall) then
1041	print*,'Pas de temps final ',it
1042	call ju2ymds(daytime, an, mois, jour, heure)
1043	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1044	endif
1045
1046	! incremente day time
1047	daytime = daytime+1./day_step
1048	day = int(daytime+0.1/day_step)
1049	! time = max(daytime-day,0.0)
1050	!Al1&jyg: correction de bug
1051	!cc time = real(mod(it,day_step))/day_step
1052	time = time_ini/24.+real(mod(it,day_step))/day_step
1053	it=it+1
1054
1055	enddo
1056
1057	if (ecrit_slab_oc.ne.-1) close(97)
1058
1059	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1060	! ---------------------------------------------------------------------------
1061	call dyn1dredem("restart1dyn.nc", &
1062	& plev,play,phi,phis,presnivs, &
1063	& u,v,temp,q,omega2)
1064
1065	CALL abort_gcm ('lmdz1d ','The End ',0)
1066
1067	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format