Context Navigation

physiq_mod.F90 @ 3895

Last change on this file since 3895 was 3887, checked in by acozic, 4 years ago
merge with rev [3877] on trunk
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Id`
File size: 187.1 KB

Rev	Line
[2418]	1	!
[1279]	2	! $Id: physiq_mod.F90 3887 2021-05-04 15:08:12Z emillour $
[2418]	3	!
[1862]	4	!#define IO_DEBUG
[2418]	5	MODULE physiq_mod
[766]	6
[2469]	7	IMPLICIT NONE
[2418]	8
	9	CONTAINS
	10
[2469]	11	SUBROUTINE physiq (nlon,nlev, &
	12	debut,lafin,pdtphys_, &
	13	paprs,pplay,pphi,pphis,presnivs, &
	14	u,v,rot,t,qx, &
	15	flxmass_w, &
	16	d_u, d_v, d_t, d_qx, d_ps)
[524]	17
[3776]	18	! For clarity, the "USE" section is now arranged in alphabetical order,
	19	! with a separate section for CPP keys
	20	! PLEASE try to follow this rule
	21
	22	USE ACAMA_GWD_rando_m, only: ACAMA_GWD_rando
	23	USE aero_mod
	24	USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	25	& fl_ebil, fl_cor_ebil
[3387]	26	USE assert_m, only: assert
[3776]	27	USE change_srf_frac_mod
	28	USE conf_phys_m, only: conf_phys
	29	USE carbon_cycle_mod, ONLY : infocfields_init, RCO2_glo, carbon_cycle_rad
	30	USE CFMIP_point_locations ! IM stations CFMIP
	31	USE cmp_seri_mod
	32	USE dimphy
	33	USE etat0_limit_unstruct_mod
	34	USE FLOTT_GWD_rando_m, only: FLOTT_GWD_rando
	35	USE fonte_neige_mod, ONLY : fonte_neige_get_vars
[3820]	36	USE geometry_mod
[2469]	37	USE ioipsl, only: histbeg, histvert, histdef, histend, histsync, &
	38	histwrite, ju2ymds, ymds2ju, getin
[3776]	39	USE ioipsl_getin_p_mod, ONLY : getin_p
	40	USE indice_sol_mod
[2469]	41	USE infotrac_phy, ONLY: nqtot, nbtr, nqo, type_trac
[3776]	42	USE iophy
	43	USE limit_read_mod, ONLY : init_limit_read
[3841]	44	USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev, klon_glo, grid1dTo2d_glo, grid_type, unstructured, nvertex
[3776]	45	USE mod_phys_lmdz_mpi_data, only: is_mpi_root
[2469]	46	USE mod_phys_lmdz_para
[3776]	47	USE netcdf95, only: nf95_close
	48	USE netcdf, only: nf90_fill_real ! IM for NMC files
	49	USE open_climoz_m, only: open_climoz ! ozone climatology from a file
	50	USE ozonecm_m, only: ozonecm ! ozone of J.-F. Royer
	51	USE pbl_surface_mod, ONLY : pbl_surface
	52	USE phyaqua_mod, only: zenang_an
	53	USE phystokenc_mod, ONLY: offline, phystokenc
	54	USE phys_cal_mod, only: year_len, mth_len, days_elapsed, jh_1jan, &
[3820]	55	year_cur, mth_cur,jD_cur, jH_cur, jD_ref, day_cur, hour, calend
[3776]	56	!! USE phys_local_var_mod, ONLY : a long list of variables
	57	!! ==> see below, after "CPP Keys" section
	58	USE phys_state_var_mod ! Variables sauvegardees de la physique
	59	USE phys_output_mod
	60	USE phys_output_ctrlout_mod
[2469]	61	USE print_control_mod, ONLY: mydebug=>debug , lunout, prt_level
[3776]	62	USE readaerosol_mod, ONLY : init_aero_fromfile
	63	USE readaerosolstrato_m, ONLY : init_readaerosolstrato
	64	USE radlwsw_m, only: radlwsw
	65	USE regr_horiz_time_climoz_m, ONLY: regr_horiz_time_climoz
	66	USE regr_pr_time_av_m, only: regr_pr_time_av
[3792]	67	USE surface_data, ONLY : type_ocean, ok_veget, landice_opt
[3776]	68	USE time_phylmdz_mod, only: annee_ref, current_time, day_ini, day_ref, &
[3820]	69	day_step_phy, itau_phy, pdtphys, raz_date, start_time, update_time, ndays
[3776]	70	USE tracinca_mod, ONLY: config_inca
[2788]	71	USE tropopause_m, ONLY: dyn_tropopause
[3776]	72	USE vampir
	73	USE VERTICAL_LAYERS_MOD, ONLY: aps,bps, ap, bp
	74	USE write_field_phy
	75
	76	!USE cmp_seri_mod
	77	! USE add_phys_tend_mod, only : add_pbl_tend, add_phys_tend, diag_phys_tend, prt_enerbil, &
	78	! & fl_ebil, fl_cor_ebil
	79
	80	!!!!!!!!!!!!!!!!!! "USE" section for CPP keys !!!!!!!!!!!!!!!!!!!!!!!!
	81	!
	82	!
[2630]	83	#ifdef CPP_Dust
[3776]	84	USE phytracr_spl_mod, ONLY: phytracr_spl, phytracr_spl_out_init
	85	USE phys_output_write_spl_mod
	86	#else
	87	USE phytrac_mod, ONLY : phytrac_init, phytrac
	88	USE phys_output_write_mod
[2630]	89	#endif
[3776]	90
	91
	92	#ifdef REPROBUS
	93	USE CHEM_REP, ONLY : Init_chem_rep_xjour, &
	94	d_q_rep,d_ql_rep,d_qi_rep,ptrop,ttrop, &
	95	ztrop, gravit,itroprep, Z1,Z2,fac,B
	96	#endif
	97
	98
	99	#ifdef CPP_RRTM
	100	USE YOERAD, ONLY : NRADLP
	101	USE YOESW, ONLY : RSUN
	102	#endif
	103
	104
[3522]	105	#ifdef CPP_StratAer
	106	USE strataer_mod, ONLY: strataer_init
	107	#endif
[3776]	108
	109
	110	#ifdef CPP_XIOS
	111	USE xios, ONLY: xios_update_calendar, xios_context_finalize, &
	112	xios_get_field_attr, xios_field_is_active
	113	USE wxios, ONLY: missing_val, missing_val_omp
	114	#endif
	115	#ifndef CPP_XIOS
	116	USE paramLMDZ_phy_mod
	117	#endif
	118	!
	119	!
	120	!!!!!!!!!!!!!!!!!! END "USE" for CPP keys !!!!!!!!!!!!!!!!!!!!!!
	121
	122	USE phys_local_var_mod, ONLY: phys_local_var_init, phys_local_var_end, &
[2606]	123	! [Variables internes non sauvegardees de la physique]
	124	! Variables locales pour effectuer les appels en serie
	125	t_seri,q_seri,ql_seri,qs_seri,u_seri,v_seri,tr_seri, &
	126	! Dynamic tendencies (diagnostics)
	127	d_t_dyn,d_q_dyn,d_ql_dyn,d_qs_dyn,d_u_dyn,d_v_dyn,d_tr_dyn, &
	128	d_q_dyn2d,d_ql_dyn2d,d_qs_dyn2d, &
	129	! Physic tendencies
	130	d_t_con,d_q_con,d_u_con,d_v_con, &
	131	d_tr, & !! to be removed?? (jyg)
	132	d_t_wake,d_q_wake, &
	133	d_t_lwr,d_t_lw0,d_t_swr,d_t_sw0, &
	134	d_t_ajsb,d_q_ajsb, &
	135	d_t_ajs,d_q_ajs,d_u_ajs,d_v_ajs, &
	136	d_t_ajs_w,d_q_ajs_w, &
	137	d_t_ajs_x,d_q_ajs_x, &
	138	!
[2705]	139	d_t_eva,d_q_eva,d_ql_eva,d_qi_eva, &
[2606]	140	d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc, &
	141	d_t_lscst,d_q_lscst, &
	142	d_t_lscth,d_q_lscth, &
	143	plul_st,plul_th, &
	144	!
	145	d_t_vdf,d_q_vdf,d_u_vdf,d_v_vdf,d_t_diss, &
	146	d_ts, &
	147	!
	148	d_t_oli,d_u_oli,d_v_oli, &
	149	d_t_oro,d_u_oro,d_v_oro, &
[2897]	150	d_t_oro_gw,d_u_oro_gw,d_v_oro_gw, &
[2606]	151	d_t_lif,d_u_lif,d_v_lif, &
	152	d_t_ec, &
	153	!
	154	du_gwd_hines,dv_gwd_hines,d_t_hin, &
	155	dv_gwd_rando,dv_gwd_front, &
	156	east_gwstress,west_gwstress, &
	157	d_q_ch4, &
	158	! Special RRTM
	159	ZLWFT0_i,ZSWFT0_i,ZFLDN0, &
	160	ZFLUP0,ZFSDN0,ZFSUP0, &
	161	!
	162	topswad_aero,solswad_aero, &
	163	topswai_aero,solswai_aero, &
	164	topswad0_aero,solswad0_aero, &
	165	!LW additional
	166	toplwad_aero,sollwad_aero, &
	167	toplwai_aero,sollwai_aero, &
	168	toplwad0_aero,sollwad0_aero, &
	169	!
	170	topsw_aero,solsw_aero, &
	171	topsw0_aero,solsw0_aero, &
	172	topswcf_aero,solswcf_aero, &
	173	tausum_aero,tau3d_aero, &
[2854]	174	drytausum_aero, &
[2606]	175	!
	176	!variables CFMIP2/CMIP5
	177	topswad_aerop, solswad_aerop, &
	178	topswai_aerop, solswai_aerop, &
	179	topswad0_aerop, solswad0_aerop, &
	180	topsw_aerop, topsw0_aerop, &
	181	solsw_aerop, solsw0_aerop, &
	182	topswcf_aerop, solswcf_aerop, &
	183	!LW diagnostics
	184	toplwad_aerop, sollwad_aerop, &
	185	toplwai_aerop, sollwai_aerop, &
	186	toplwad0_aerop, sollwad0_aerop, &
	187	!
	188	ptstar, pt0, slp, &
	189	!
	190	bils, &
	191	!
	192	cldh, cldl,cldm, cldq, cldt, &
	193	JrNt, &
	194	dthmin, evap, fder, plcl, plfc, &
	195	prw, prlw, prsw, &
	196	s_lcl, s_pblh, s_pblt, s_therm, &
	197	cdragm, cdragh, &
	198	zustar, zu10m, zv10m, rh2m, qsat2m, &
	199	zq2m, zt2m, weak_inversion, &
[3489]	200	zq2m_cor,zt2m_cor,zu10m_cor,zv10m_cor, & ! pour corriger d'un bug
	201	zrh2m_cor,zqsat2m_cor, &
[2606]	202	zt2m_min_mon, zt2m_max_mon, & ! pour calcul_divers.h
	203	t2m_min_mon, t2m_max_mon, & ! pour calcul_divers.h
	204	!
	205	s_pblh_x, s_pblh_w, &
	206	s_lcl_x, s_lcl_w, &
	207	!
	208	slab_wfbils, tpot, tpote, &
	209	ue, uq, ve, vq, zxffonte, &
[3257]	210	uwat, vwat, &
[2606]	211	zxfqcalving, zxfluxlat, &
	212	zxrunofflic, &
	213	zxtsol, snow_lsc, zxfqfonte, zxqsurf, &
	214	rain_lsc, rain_num, &
	215	!
	216	sens_x, sens_w, &
	217	zxfluxlat_x, zxfluxlat_w, &
	218	!
[3179]	219	d_t_vdf_x, d_t_vdf_w, &
	220	d_q_vdf_x, d_q_vdf_w, &
[2606]	221	pbl_tke_input, &
	222	t_therm, q_therm, u_therm, v_therm, &
	223	cdragh_x, cdragh_w, &
	224	cdragm_x, cdragm_w, &
	225	kh, kh_x, kh_w, &
	226	!
[2730]	227	wake_k, &
[3080]	228	alp_wake, &
[2635]	229	wake_h, wake_omg, &
	230	! tendencies of delta T and delta q:
	231	d_deltat_wk, d_deltaq_wk, & ! due to wakes
	232	d_deltat_wk_gw, d_deltaq_wk_gw, & ! due to wake induced gravity waves
	233	d_deltat_vdf, d_deltaq_vdf, & ! due to vertical diffusion
	234	d_deltat_the, d_deltaq_the, & ! due to thermals
	235	d_deltat_ajs_cv, d_deltaq_ajs_cv, & ! due to dry adjustment of (w) before convection
	236	! tendencies of wake fractional area and wake number per unit area:
[3208]	237	d_s_wk, d_dens_a_wk, d_dens_wk, & ! due to wakes
	238	!!! d_s_vdf, d_dens_a_vdf, d_dens_vdf, & ! due to vertical diffusion
	239	!!! d_s_the, d_dens_a_the, d_dens_the, & ! due to thermals
[2635]	240	!
[3148]	241	ptconv, ratqsc, &
[2824]	242	wbeff, convoccur, zmax_th, &
[2606]	243	sens, flwp, fiwp, &
[3080]	244	alp_bl_conv,alp_bl_det, &
[2606]	245	alp_bl_fluct_m,alp_bl_fluct_tke, &
	246	alp_bl_stat, n2, s2, &
	247	proba_notrig, random_notrig, &
[3208]	248	cv_gen, &
[2606]	249	!
[3134]	250	dnwd0, &
	251	omega, &
[2606]	252	epmax_diag, &
[3134]	253	! Deep convective variables used in phytrac
	254	pmflxr, pmflxs, &
[3496]	255	wdtrainA, wdtrainS, wdtrainM, &
[3134]	256	upwd, dnwd, &
[2606]	257	ep, &
[3134]	258	da, mp, &
	259	phi, &
	260	wght_cvfd, &
	261	phi2, &
	262	d1a, dam, &
	263	ev, &
	264	elij, &
[3496]	265	qtaa, &
[3134]	266	clw, &
	267	epmlmMm, eplaMm, &
	268	sij, &
[3387]	269	!
[2606]	270	cldemi, &
	271	cldfra, cldtau, fiwc, &
	272	fl, re, flwc, &
	273	ref_liq, ref_ice, theta, &
	274	ref_liq_pi, ref_ice_pi, &
[3780]	275	zphi, zx_rh, zx_rhl, zx_rhi, &
[2606]	276	pmfd, pmfu, &
	277	!
	278	t2m, fluxlat, &
	279	fsollw, evap_pot, &
	280	fsolsw, wfbils, wfbilo, &
[2670]	281	wfevap, wfrain, wfsnow, &
[3134]	282	prfl, psfl, fraca, Vprecip, &
[2606]	283	zw2, &
[3387]	284	!
[2606]	285	fluxu, fluxv, &
	286	fluxt, &
[3387]	287	!
[2606]	288	uwriteSTD, vwriteSTD, & !pour calcul_STDlev.h
	289	wwriteSTD, phiwriteSTD, & !pour calcul_STDlev.h
	290	qwriteSTD, twriteSTD, rhwriteSTD, & !pour calcul_STDlev.h
[3387]	291	!
[2606]	292	beta_prec, &
	293	rneb, &
[2968]	294	zxsnow,snowhgt,qsnow,to_ice,sissnow,runoff,albsol3_lic
[2606]	295	!
[2630]	296
[782]	297
[3387]	298	IMPLICIT NONE
[2469]	299	!>======================================================================
	300	!!
	301	!! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
	302	!!
	303	!! Objet: Moniteur general de la physique du modele
	304	!!AA Modifications quant aux traceurs :
	305	!!AA - uniformisation des parametrisations ds phytrac
	306	!!AA - stockage des moyennes des champs necessaires
	307	!!AA en mode traceur off-line
	308	!!======================================================================
	309	!! CLEFS CPP POUR LES IO
	310	!! =====================
[1352]	311	#define histNMC
[2469]	312	!!======================================================================
	313	!! modif ( P. Le Van , 12/10/98 )
	314	!!
	315	!! Arguments:
	316	!!
	317	!! nlon----input-I-nombre de points horizontaux
	318	!! nlev----input-I-nombre de couches verticales, doit etre egale a klev
	319	!! debut---input-L-variable logique indiquant le premier passage
	320	!! lafin---input-L-variable logique indiquant le dernier passage
	321	!! jD_cur -R-jour courant a l'appel de la physique (jour julien)
	322	!! jH_cur -R-heure courante a l'appel de la physique (jour julien)
	323	!! pdtphys-input-R-pas d'integration pour la physique (seconde)
	324	!! paprs---input-R-pression pour chaque inter-couche (en Pa)
	325	!! pplay---input-R-pression pour le mileu de chaque couche (en Pa)
	326	!! pphi----input-R-geopotentiel de chaque couche (g z) (reference sol)
	327	!! pphis---input-R-geopotentiel du sol
	328	!! presnivs-input_R_pressions approximat. des milieux couches ( en PA)
	329	!! u-------input-R-vitesse dans la direction X (de O a E) en m/s
	330	!! v-------input-R-vitesse Y (de S a N) en m/s
	331	!! t-------input-R-temperature (K)
	332	!! qx------input-R-humidite specifique (kg/kg) et d'autres traceurs
	333	!! d_t_dyn-input-R-tendance dynamique pour "t" (K/s)
	334	!! d_q_dyn-input-R-tendance dynamique pour "q" (kg/kg/s)
[2496]	335	!! d_ql_dyn-input-R-tendance dynamique pour "ql" (kg/kg/s)
	336	!! d_qs_dyn-input-R-tendance dynamique pour "qs" (kg/kg/s)
[2469]	337	!! flxmass_w -input-R- flux de masse verticale
	338	!! d_u-----output-R-tendance physique de "u" (m/s/s)
	339	!! d_v-----output-R-tendance physique de "v" (m/s/s)
	340	!! d_t-----output-R-tendance physique de "t" (K/s)
	341	!! d_qx----output-R-tendance physique de "qx" (kg/kg/s)
	342	!! d_ps----output-R-tendance physique de la pression au sol
	343	!!======================================================================
	344	integer jjmp1
	345	! parameter (jjmp1=jjm+1-1/jjm) ! => (jjmp1=nbp_lat-1/(nbp_lat-1))
	346	! integer iip1
	347	! parameter (iip1=iim+1)
[782]	348
[2469]	349	include "regdim.h"
	350	include "dimsoil.h"
	351	include "clesphys.h"
	352	include "thermcell.h"
[3011]	353	include "dimpft.h"
[2469]	354	!======================================================================
[3479]	355	LOGICAL, SAVE :: ok_volcan ! pour activer les diagnostics volcaniques
[3600]	356	!$OMP THREADPRIVATE(ok_volcan)
[2469]	357	LOGICAL ok_cvl ! pour activer le nouveau driver pour convection KE
	358	PARAMETER (ok_cvl=.TRUE.)
	359	LOGICAL ok_gust ! pour activer l'effet des gust sur flux surface
	360	PARAMETER (ok_gust=.FALSE.)
[3600]	361	INTEGER, SAVE :: iflag_radia ! active ou non le rayonnement (MPL)
[2469]	362	!$OMP THREADPRIVATE(iflag_radia)
	363	!======================================================================
	364	LOGICAL check ! Verifier la conservation du modele en eau
	365	PARAMETER (check=.FALSE.)
	366	LOGICAL ok_stratus ! Ajouter artificiellement les stratus
	367	PARAMETER (ok_stratus=.FALSE.)
	368	!======================================================================
	369	REAL amn, amx
	370	INTEGER igout
	371	!======================================================================
[3317]	372	! Clef iflag_cycle_diurne controlant l'activation du cycle diurne:
[2469]	373	! en attente du codage des cles par Fred
[3317]	374	! iflag_cycle_diurne est initialise par conf_phys et se trouve
	375	! dans clesphys.h (IM)
[2469]	376	!======================================================================
	377	! Modele thermique du sol, a activer pour le cycle diurne:
	378	!cc LOGICAL soil_model
	379	!cc PARAMETER (soil_model=.FALSE.)
	380	!======================================================================
	381	! Dans les versions precedentes, l'eau liquide nuageuse utilisee dans
	382	! le calcul du rayonnement est celle apres la precipitation des nuages.
	383	! Si cette cle new_oliq est activee, ce sera une valeur moyenne entre
	384	! la condensation et la precipitation. Cette cle augmente les impacts
	385	! radiatifs des nuages.
	386	!cc LOGICAL new_oliq
	387	!cc PARAMETER (new_oliq=.FALSE.)
	388	!======================================================================
	389	! Clefs controlant deux parametrisations de l'orographie:
	390	!c LOGICAL ok_orodr
	391	!cc PARAMETER (ok_orodr=.FALSE.)
	392	!cc LOGICAL ok_orolf
	393	!cc PARAMETER (ok_orolf=.FALSE.)
	394	!======================================================================
	395	LOGICAL ok_journe ! sortir le fichier journalier
[3461]	396	SAVE ok_journe
[2469]	397	!$OMP THREADPRIVATE(ok_journe)
	398	!
	399	LOGICAL ok_mensuel ! sortir le fichier mensuel
[3461]	400	SAVE ok_mensuel
[2469]	401	!$OMP THREADPRIVATE(ok_mensuel)
	402	!
	403	LOGICAL ok_instan ! sortir le fichier instantane
[3461]	404	SAVE ok_instan
[2469]	405	!$OMP THREADPRIVATE(ok_instan)
	406	!
	407	LOGICAL ok_LES ! sortir le fichier LES
[3461]	408	SAVE ok_LES
[2469]	409	!$OMP THREADPRIVATE(ok_LES)
	410	!
	411	LOGICAL callstats ! sortir le fichier stats
[3461]	412	SAVE callstats
[2469]	413	!$OMP THREADPRIVATE(callstats)
	414	!
	415	LOGICAL ok_region ! sortir le fichier regional
	416	PARAMETER (ok_region=.FALSE.)
	417	!======================================================================
[3461]	418	REAL seuil_inversion
	419	SAVE seuil_inversion
[2469]	420	!$OMP THREADPRIVATE(seuil_inversion)
[3461]	421	INTEGER iflag_ratqs
	422	SAVE iflag_ratqs
[2469]	423	!$OMP THREADPRIVATE(iflag_ratqs)
	424	real facteur
[1507]	425
[2469]	426	REAL wmax_th(klon)
	427	REAL tau_overturning_th(klon)
[878]	428
[3461]	429	INTEGER lmax_th(klon)
	430	INTEGER limbas(klon)
	431	REAL ratqscth(klon,klev)
	432	REAL ratqsdiff(klon,klev)
	433	REAL zqsatth(klon,klev)
[878]	434
[2469]	435	!======================================================================
	436	!
	437	INTEGER ivap ! indice de traceurs pour vapeur d'eau
	438	PARAMETER (ivap=1)
	439	INTEGER iliq ! indice de traceurs pour eau liquide
	440	PARAMETER (iliq=2)
	441	!CR: on ajoute la phase glace
	442	INTEGER isol ! indice de traceurs pour eau glace
	443	PARAMETER (isol=3)
	444	!
	445	!
	446	! Variables argument:
	447	!
	448	INTEGER nlon
	449	INTEGER nlev
	450	REAL,INTENT(IN) :: pdtphys_
	451	! NB: pdtphys to be used in physics is in time_phylmdz_mod
	452	LOGICAL debut, lafin
	453	REAL paprs(klon,klev+1)
	454	REAL pplay(klon,klev)
	455	REAL pphi(klon,klev)
	456	REAL pphis(klon)
	457	REAL presnivs(klev)
[2799]	458	!JLD REAL znivsig(klev)
	459	!JLD real pir
[719]	460
[2469]	461	REAL u(klon,klev)
	462	REAL v(klon,klev)
[2333]	463
[2469]	464	REAL, intent(in):: rot(klon, klev)
	465	! relative vorticity, in s-1, needed for frontal waves
[2333]	466
[2469]	467	REAL t(klon,klev),thetal(klon,klev)
	468	! thetal: ligne suivante a decommenter si vous avez les fichiers
	469	! MPL 20130625
	470	! fth_fonctions.F90 et parkind1.F90
	471	! sinon thetal=theta
	472	! REAL fth_thetae,fth_thetav,fth_thetal
	473	REAL qx(klon,klev,nqtot)
	474	REAL flxmass_w(klon,klev)
	475	REAL d_u(klon,klev)
	476	REAL d_v(klon,klev)
	477	REAL d_t(klon,klev)
	478	REAL d_qx(klon,klev,nqtot)
	479	REAL d_ps(klon)
[2897]	480	! variables pour tend_to_tke
	481	REAL duadd(klon,klev)
	482	REAL dvadd(klon,klev)
	483	REAL dtadd(klon,klev)
	484
[2271]	485	#ifndef CPP_XIOS
[2997]	486	REAL, SAVE :: missing_val=nf90_fill_real
[2271]	487	#endif
[3134]	488	!! Variables moved to phys_local_var_mod
	489	!! ! Variables pour le transport convectif
	490	!! real da(klon,klev),phi(klon,klev,klev),mp(klon,klev)
	491	!! real wght_cvfd(klon,klev)
	492	!! ! Variables pour le lessivage convectif
	493	!! ! RomP >>>
	494	!! real phi2(klon,klev,klev)
	495	!! real d1a(klon,klev),dam(klon,klev)
	496	!! real ev(klon,klev)
	497	!! real clw(klon,klev),elij(klon,klev,klev)
	498	!! real epmlmMm(klon,klev,klev),eplaMm(klon,klev)
	499	!! ! RomP <<<
[2469]	500	!IM definition dynamique o_trac dans phys_output_open
	501	! type(ctrl_out) :: o_trac(nqtot)
[524]	502
[2469]	503	! variables a une pression donnee
	504	!
	505	include "declare_STDlev.h"
	506	!
	507	!
	508	include "radopt.h"
	509	!
	510	!
	511	INTEGER debug
	512	INTEGER n
	513	!ym INTEGER npoints
	514	!ym PARAMETER(npoints=klon)
	515	!
	516	INTEGER nregISCtot
	517	PARAMETER(nregISCtot=1)
	518	!
	519	! imin_debut, nbpti, jmin_debut, nbptj : parametres pour sorties
	520	! sur 1 region rectangulaire y compris pour 1 point
	521	! imin_debut : indice minimum de i; nbpti : nombre de points en
	522	! direction i (longitude)
	523	! jmin_debut : indice minimum de j; nbptj : nombre de points en
	524	! direction j (latitude)
[2799]	525	!JLD INTEGER imin_debut, nbpti
	526	!JLD INTEGER jmin_debut, nbptj
[2469]	527	!IM: region='3d' <==> sorties en global
	528	CHARACTER*3 region
	529	PARAMETER(region='3d')
[3461]	530	LOGICAL ok_hf
[2469]	531	!
[3461]	532	SAVE ok_hf
[2469]	533	!$OMP THREADPRIVATE(ok_hf)
[524]	534
[3461]	535	INTEGER, PARAMETER :: longcles=20
	536	REAL, SAVE :: clesphy0(longcles)
[2469]	537	!$OMP THREADPRIVATE(clesphy0)
	538	!
	539	! Variables propres a la physique
[3461]	540	INTEGER, SAVE :: itap ! compteur pour la physique
[2469]	541	!$OMP THREADPRIVATE(itap)
[2235]	542
[2469]	543	INTEGER, SAVE :: abortphy=0 ! Reprere si on doit arreter en fin de phys
	544	!$OMP THREADPRIVATE(abortphy)
	545	!
[3461]	546	REAL,SAVE :: solarlong0
[2469]	547	!$OMP THREADPRIVATE(solarlong0)
[987]	548
[2469]	549	!
	550	! Parametres de l'Orographie a l'Echelle Sous-Maille (OESM):
	551	!
	552	!IM 141004 REAL zulow(klon),zvlow(klon),zustr(klon), zvstr(klon)
	553	REAL zulow(klon),zvlow(klon)
	554	!
	555	INTEGER igwd,idx(klon),itest(klon)
	556	!
	557	! REAL,allocatable,save :: run_off_lic_0(:)
	558	! !$OMP THREADPRIVATE(run_off_lic_0)
	559	!ym SAVE run_off_lic_0
	560	!KE43
	561	! Variables liees a la convection de K. Emanuel (sb):
	562	!
[3461]	563	REAL, SAVE :: bas, top ! cloud base and top levels
[2469]	564	!$OMP THREADPRIVATE(bas, top)
	565	!------------------------------------------------------------------
	566	! Upmost level reached by deep convection and related variable (jyg)
	567	!
	568	INTEGER izero
	569	INTEGER k_upper_cv
	570	!------------------------------------------------------------------
[3153]	571	! Compteur de l'occurence de cvpas=1
	572	INTEGER Ncvpaseq1
	573	SAVE Ncvpaseq1
	574	!$OMP THREADPRIVATE(Ncvpaseq1)
[2469]	575	!
	576	!==========================================================================
	577	!CR04.12.07: on ajoute les nouvelles variables du nouveau schema
	578	!de convection avec poches froides
	579	! Variables li\'ees \`a la poche froide (jyg)
[879]	580
[3496]	581	!! REAL mipsh(klon,klev) ! mass flux shed by the adiab ascent at each level
	582	!! Moved to phys_state_var_mod
[2469]	583	!
	584	REAL wape_prescr, fip_prescr
	585	INTEGER it_wape_prescr
	586	SAVE wape_prescr, fip_prescr, it_wape_prescr
	587	!$OMP THREADPRIVATE(wape_prescr, fip_prescr, it_wape_prescr)
	588	!
	589	! variables supplementaires de concvl
	590	REAL Tconv(klon,klev)
[3134]	591	!! variable moved to phys_local_var_mod
	592	!! REAL sij(klon,klev,klev)
[2812]	593	!! !
	594	!! ! variables pour tester la conservation de l'energie dans concvl
	595	!! REAL, DIMENSION(klon,klev) :: d_t_con_sat
	596	!! REAL, DIMENSION(klon,klev) :: d_q_con_sat
	597	!! REAL, DIMENSION(klon,klev) :: dql_sat
[970]	598
[3461]	599	REAL, SAVE :: alp_bl_prescr=0.
	600	REAL, SAVE :: ale_bl_prescr=0.
	601	REAL, SAVE :: wake_s_min_lsp=0.1
[2469]	602	!$OMP THREADPRIVATE(alp_bl_prescr,ale_bl_prescr)
	603	!$OMP THREADPRIVATE(wake_s_min_lsp)
[970]	604
[3461]	605	REAL ok_wk_lsp(klon)
[1516]	606
[2469]	607	!RC
	608	! Variables li\'ees \`a la poche froide (jyg et rr)
[879]	609
[2635]	610	INTEGER, SAVE :: iflag_wake_tend ! wake: if =0, then wake state variables are
	611	! updated within calwake
	612	!$OMP THREADPRIVATE(iflag_wake_tend)
[3000]	613	INTEGER, SAVE :: iflag_alp_wk_cond=0 ! wake: if =0, then Alp_wk is the average lifting
	614	! power provided by the wakes; else, Alp_wk is the
	615	! lifting power conditionned on the presence of a
	616	! gust-front in the grid cell.
	617	!$OMP THREADPRIVATE(iflag_alp_wk_cond)
[3489]	618
[3490]	619	INTEGER, SAVE :: iflag_bug_t2m_ipslcm61=1 !
[3489]	620	!$OMP THREADPRIVATE(iflag_bug_t2m_ipslcm61)
[3490]	621	INTEGER, SAVE :: iflag_bug_t2m_stab_ipslcm61=-1 !
[3489]	622	!$OMP THREADPRIVATE(iflag_bug_t2m_stab_ipslcm61)
	623
[2635]	624	REAL t_w(klon,klev),q_w(klon,klev) ! temperature and moisture profiles in the wake region
	625	REAL t_x(klon,klev),q_x(klon,klev) ! temperature and moisture profiles in the off-wake region
[879]	626
[2469]	627	REAL wake_dth(klon,klev) ! wake : temp pot difference
[879]	628
[2469]	629	REAL wake_omgbdth(klon,klev) ! Wake : flux of Delta_Theta
	630	! transported by LS omega
	631	REAL wake_dp_omgb(klon,klev) ! Wake : vertical gradient of
	632	! large scale omega
	633	REAL wake_dtKE(klon,klev) ! Wake : differential heating
	634	! (wake - unpertubed) CONV
	635	REAL wake_dqKE(klon,klev) ! Wake : differential moistening
	636	! (wake - unpertubed) CONV
	637	REAL wake_dp_deltomg(klon,klev) ! Wake : gradient vertical de wake_omg
	638	REAL wake_spread(klon,klev) ! spreading term in wake_delt
	639	!
	640	!pourquoi y'a pas de save??
	641	!
[2730]	642	!!! INTEGER, SAVE, DIMENSION(klon) :: wake_k
	643	!!! !$OMP THREADPRIVATE(wake_k)
[2469]	644	!
	645	!jyg<
	646	!cc REAL wake_pe(klon) ! Wake potential energy - WAPE
	647	!>jyg
[879]	648
[3000]	649	REAL wake_fip_0(klon) ! Average Front Incoming Power (unconditionned)
[2469]	650	REAL wake_gfl(klon) ! Gust Front Length
[2635]	651	!!! REAL wake_dens(klon) ! moved to phys_state_var_mod
[2469]	652	!
	653	!
	654	REAL dt_dwn(klon,klev)
	655	REAL dq_dwn(klon,klev)
	656	REAL M_dwn(klon,klev)
	657	REAL M_up(klon,klev)
	658	REAL dt_a(klon,klev)
	659	REAL dq_a(klon,klev)
	660	REAL d_t_adjwk(klon,klev) !jyg
	661	REAL d_q_adjwk(klon,klev) !jyg
	662	LOGICAL,SAVE :: ok_adjwk=.FALSE.
	663	!$OMP THREADPRIVATE(ok_adjwk)
[2882]	664	INTEGER,SAVE :: iflag_adjwk=0 !jyg
	665	!$OMP THREADPRIVATE(iflag_adjwk) !jyg
[2657]	666	REAL,SAVE :: oliqmax=999.,oicemax=999.
	667	!$OMP THREADPRIVATE(oliqmax,oicemax)
[2469]	668	REAL, SAVE :: alp_offset
	669	!$OMP THREADPRIVATE(alp_offset)
[3150]	670	REAL, SAVE :: dtcon_multistep_max=1.e6
	671	!$OMP THREADPRIVATE(dtcon_multistep_max)
	672	REAL, SAVE :: dqcon_multistep_max=1.e6
	673	!$OMP THREADPRIVATE(dqcon_multistep_max)
	674
[2897]	675
[2469]	676	!
	677	!RR:fin declarations poches froides
	678	!==========================================================================
[1032]	679
[2469]	680	REAL ztv(klon,klev),ztva(klon,klev)
	681	REAL zpspsk(klon,klev)
	682	REAL ztla(klon,klev),zqla(klon,klev)
	683	REAL zthl(klon,klev)
[1638]	684
[2469]	685	!cc nrlmd le 10/04/2012
[1638]	686
[2469]	687	!--------Stochastic Boundary Layer Triggering: ALE_BL--------
	688	!---Propri\'et\'es du thermiques au LCL
	689	real zlcl_th(klon) ! Altitude du LCL calcul\'e
	690	! continument (pcon dans
	691	! thermcell_main.F90)
	692	real fraca0(klon) ! Fraction des thermiques au LCL
	693	real w0(klon) ! Vitesse des thermiques au LCL
	694	real w_conv(klon) ! Vitesse verticale de grande \'echelle au LCL
	695	real tke0(klon,klev+1) ! TKE au d\'ebut du pas de temps
	696	real therm_tke_max0(klon) ! TKE dans les thermiques au LCL
	697	real env_tke_max0(klon) ! TKE dans l'environnement au LCL
[1638]	698
[2799]	699	!JLD !---D\'eclenchement stochastique
	700	!JLD integer :: tau_trig(klon)
[1638]	701
[2469]	702	REAL,SAVE :: random_notrig_max=1.
	703	!$OMP THREADPRIVATE(random_notrig_max)
[2294]	704
[2469]	705	!--------Statistical Boundary Layer Closure: ALP_BL--------
	706	!---Profils de TKE dans et hors du thermique
	707	real therm_tke_max(klon,klev) ! Profil de TKE dans les thermiques
	708	real env_tke_max(klon,klev) ! Profil de TKE dans l'environnement
[1638]	709
[2897]	710	!-------Activer les tendances de TKE due a l'orograp??ie---------
	711	INTEGER, SAVE :: addtkeoro
	712	!$OMP THREADPRIVATE(addtkeoro)
	713	REAL, SAVE :: alphatkeoro
	714	!$OMP THREADPRIVATE(alphatkeoro)
	715	LOGICAL, SAVE :: smallscales_tkeoro
	716	!$OMP THREADPRIVATE(smallscales_tkeoro)
[1638]	717
[2897]	718
	719
[2469]	720	!cc fin nrlmd le 10/04/2012
[782]	721
[2469]	722	! Variables locales pour la couche limite (al1):
	723	!
	724	!Al1 REAL pblh(klon) ! Hauteur de couche limite
	725	!Al1 SAVE pblh
	726	!34EK
	727	!
	728	! Variables locales:
	729	!
	730	!AA
	731	!AA Pour phytrac
	732	REAL u1(klon) ! vents dans la premiere couche U
	733	REAL v1(klon) ! vents dans la premiere couche V
[524]	734
[2469]	735	!@$$ LOGICAL offline ! Controle du stockage ds "physique"
	736	!@$$ PARAMETER (offline=.false.)
	737	!@$$ INTEGER physid
	738	REAL frac_impa(klon,klev) ! fractions d'aerosols lessivees (impaction)
	739	REAL frac_nucl(klon,klev) ! idem (nucleation)
	740	! RomP >>>
	741	REAL beta_prec_fisrt(klon,klev) ! taux de conv de l'eau cond (fisrt)
	742	! RomP <<<
[2832]	743	REAL :: calday
[2068]	744
[2469]	745	!IM cf FH pour Tiedtke 080604
	746	REAL rain_tiedtke(klon),snow_tiedtke(klon)
	747	!
	748	!IM 050204 END
	749	REAL devap(klon) ! evaporation et sa derivee
	750	REAL dsens(klon) ! chaleur sensible et sa derivee
[1279]	751
[2469]	752	!
	753	! Conditions aux limites
	754	!
	755	!
	756	REAL :: day_since_equinox
	757	! Date de l'equinoxe de printemps
	758	INTEGER, parameter :: mth_eq=3, day_eq=21
	759	REAL :: jD_eq
[1279]	760
[3461]	761	LOGICAL, parameter :: new_orbit = .TRUE.
[524]	762
[2469]	763	!
	764	INTEGER lmt_pas
	765	SAVE lmt_pas ! frequence de mise a jour
	766	!$OMP THREADPRIVATE(lmt_pas)
	767	real zmasse(klon, nbp_lev),exner(klon, nbp_lev)
	768	! (column-density of mass of air in a cell, in kg m-2)
	769	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
[1797]	770
[2469]	771	!IM sorties
	772	REAL un_jour
	773	PARAMETER(un_jour=86400.)
	774	INTEGER itapm1 !pas de temps de la physique du(es) mois precedents
	775	SAVE itapm1 !mis a jour le dernier pas de temps du mois en cours
	776	!$OMP THREADPRIVATE(itapm1)
	777	!======================================================================
	778	!
	779	! Declaration des procedures appelees
	780	!
	781	EXTERNAL angle ! calculer angle zenithal du soleil
	782	EXTERNAL alboc ! calculer l'albedo sur ocean
	783	EXTERNAL ajsec ! ajustement sec
	784	EXTERNAL conlmd ! convection (schema LMD)
	785	!KE43
	786	EXTERNAL conema3 ! convect4.3
	787	EXTERNAL fisrtilp ! schema de condensation a grande echelle (pluie)
	788	!AA
	789	! JBM (3/14) fisrtilp_tr not loaded
	790	! EXTERNAL fisrtilp_tr ! schema de condensation a grande echelle (pluie)
	791	! ! stockage des coefficients necessaires au
	792	! ! lessivage OFF-LINE et ON-LINE
	793	EXTERNAL hgardfou ! verifier les temperatures
	794	EXTERNAL nuage ! calculer les proprietes radiatives
	795	!C EXTERNAL o3cm ! initialiser l'ozone
	796	EXTERNAL orbite ! calculer l'orbite terrestre
	797	EXTERNAL phyetat0 ! lire l'etat initial de la physique
	798	EXTERNAL phyredem ! ecrire l'etat de redemarrage de la physique
	799	EXTERNAL suphel ! initialiser certaines constantes
	800	EXTERNAL transp ! transport total de l'eau et de l'energie
	801	!IM
	802	EXTERNAL haut2bas !variables de haut en bas
	803	EXTERNAL ini_undefSTD !initialise a 0 une variable a 1 niveau de pression
	804	EXTERNAL undefSTD !somme les valeurs definies d'1 var a 1 niveau de pression
	805	! EXTERNAL moy_undefSTD !moyenne d'1 var a 1 niveau de pression
	806	! EXTERNAL moyglo_aire
	807	! moyenne globale d'1 var ponderee par l'aire de la maille (moyglo_pondaire)
	808	! par la masse/airetot (moyglo_pondaima) et la vraie masse (moyglo_pondmass)
	809	!
	810	!
	811	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	812	! Local variables
	813	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	814	!
	815	REAL rhcl(klon,klev) ! humiditi relative ciel clair
	816	REAL dialiq(klon,klev) ! eau liquide nuageuse
	817	REAL diafra(klon,klev) ! fraction nuageuse
	818	REAL cldliq(klon,klev) ! eau liquide nuageuse
	819	!
	820	!XXX PB
	821	REAL fluxq(klon,klev, nbsrf) ! flux turbulent d'humidite
	822	!
	823	REAL zxfluxt(klon, klev)
	824	REAL zxfluxq(klon, klev)
	825	REAL zxfluxu(klon, klev)
	826	REAL zxfluxv(klon, klev)
[1797]	827
[2469]	828	! Le rayonnement n'est pas calcule tous les pas, il faut donc
	829	! sauvegarder les sorties du rayonnement
	830	!ym SAVE heat,cool,albpla,topsw,toplw,solsw,sollw,sollwdown
	831	!ym SAVE sollwdownclr, toplwdown, toplwdownclr
	832	!ym SAVE topsw0,toplw0,solsw0,sollw0, heat0, cool0
	833	!
	834	INTEGER itaprad
	835	SAVE itaprad
	836	!$OMP THREADPRIVATE(itaprad)
	837	!
	838	REAL conv_q(klon,klev) ! convergence de l'humidite (kg/kg/s)
	839	REAL conv_t(klon,klev) ! convergence de la temperature(K/s)
	840	!
[2799]	841	#ifdef INCA
[2469]	842	REAL zxsnow_dummy(klon)
[2799]	843	#endif
[2469]	844	REAL zsav_tsol(klon)
	845	!
	846	REAL dist, rmu0(klon), fract(klon)
	847	REAL zrmu0(klon), zfract(klon)
	848	REAL zdtime, zdtime1, zdtime2, zlongi
	849	!
	850	REAL qcheck
	851	REAL z_avant(klon), z_apres(klon), z_factor(klon)
	852	LOGICAL zx_ajustq
	853	!
[2799]	854	REAL za
	855	REAL zx_t, zx_qs, zdelta, zcor
[2469]	856	real zqsat(klon,klev)
	857	!
[2897]	858	INTEGER i, k, iq, j, nsrf, ll, l
[2469]	859	!
	860	REAL t_coup
	861	PARAMETER (t_coup=234.0)
[1797]	862
[2469]	863	!ym A voir plus tard !!
	864	!ym REAL zx_relief(iim,jjmp1)
	865	!ym REAL zx_aire(iim,jjmp1)
	866	!
	867	! Grandeurs de sorties
	868	REAL s_capCL(klon)
	869	REAL s_oliqCL(klon), s_cteiCL(klon)
	870	REAL s_trmb1(klon), s_trmb2(klon)
	871	REAL s_trmb3(klon)
[2707]	872
	873	! La convection n'est pas calculee tous les pas, il faut donc
	874	! sauvegarder les sorties de la convection
	875	!ym SAVE
	876	!ym SAVE
	877	!ym SAVE
	878	!
[2730]	879	INTEGER itapcv, itapwk
	880	SAVE itapcv, itapwk
	881	!$OMP THREADPRIVATE(itapcv, itapwk)
[2707]	882
[2469]	883	!KE43
	884	! Variables locales pour la convection de K. Emanuel (sb):
[524]	885
[2469]	886	REAL tvp(klon,klev) ! virtual temp of lifted parcel
	887	CHARACTER*40 capemaxcels !max(CAPE)
[1412]	888
[2469]	889	REAL rflag(klon) ! flag fonctionnement de convect
	890	INTEGER iflagctrl(klon) ! flag fonctionnement de convect
[904]	891
[2469]	892	! -- convect43:
	893	INTEGER ntra ! nb traceurs pour convect4.3
	894	REAL dtvpdt1(klon,klev), dtvpdq1(klon,klev)
	895	REAL dplcldt(klon), dplcldr(klon)
	896	!? . condm_con(klon,klev),conda_con(klon,klev),
	897	!? . mr_con(klon,klev),ep_con(klon,klev)
	898	!? . ,sadiab(klon,klev),wadiab(klon,klev)
	899	! --
	900	!34EK
	901	!
	902	! Variables du changement
	903	!
	904	! con: convection
	905	! lsc: condensation a grande echelle (Large-Scale-Condensation)
	906	! ajs: ajustement sec
	907	! eva: evaporation de l'eau liquide nuageuse
	908	! vdf: couche limite (Vertical DiFfusion)
[2611]	909	!
[2469]	910	! tendance nulles
[2812]	911	REAL, dimension(klon,klev):: du0, dv0, dt0, dq0, dql0, dqi0
	912	REAL, dimension(klon) :: dsig0, ddens0
	913	INTEGER, dimension(klon) :: wkoccur1
[2801]	914	! tendance buffer pour appel de add_phys_tend
	915	REAL, DIMENSION(klon,klev) :: d_q_ch4_dtime
[2611]	916	!
	917	! Flag pour pouvoir ne pas ajouter les tendances.
	918	! Par defaut, les tendances doivente etre ajoutees et
	919	! flag_inhib_tend = 0
	920	! flag_inhib_tend > 0 : tendances non ajoutees, avec un nombre
	921	! croissant de print quand la valeur du flag augmente
	922	!!! attention, ce flag doit etre change avec prudence !!!
	923	INTEGER :: flag_inhib_tend = 0 ! 0 is the default value
	924	!! INTEGER :: flag_inhib_tend = 2
[3134]	925	!
	926	! Logical switch to a bug : reseting to 0 convective variables at the
	927	! begining of physiq.
	928	LOGICAL, SAVE :: ok_bug_cv_trac = .TRUE.
	929	!$OMP THREADPRIVATE(ok_bug_cv_trac)
[3180]	930	!
	931	! Logical switch to a bug : changing wake_deltat when thermals are active
	932	! even when there are no wakes.
	933	LOGICAL, SAVE :: ok_bug_split_th = .TRUE.
	934	!$OMP THREADPRIVATE(ok_bug_split_th)
[524]	935
[2469]	936	!
	937	!********************************************************
	938	! declarations
[524]	939
[2469]	940	!********************************************************
	941	!IM 081204 END
	942	!
	943	REAL pen_u(klon,klev), pen_d(klon,klev)
	944	REAL pde_u(klon,klev), pde_d(klon,klev)
	945	INTEGER kcbot(klon), kctop(klon), kdtop(klon)
	946	!
[3461]	947	REAL ratqsbas,ratqshaut,tau_ratqs
	948	SAVE ratqsbas,ratqshaut,tau_ratqs
[2469]	949	!$OMP THREADPRIVATE(ratqsbas,ratqshaut,tau_ratqs)
[2534]	950	REAL, SAVE :: ratqsp0=50000., ratqsdp=20000.
	951	!$OMP THREADPRIVATE(ratqsp0, ratqsdp)
[644]	952
[2469]	953	! Parametres lies au nouveau schema de nuages (SB, PDF)
[3461]	954	REAL, SAVE :: fact_cldcon
	955	REAL, SAVE :: facttemps
	956	!$OMP THREADPRIVATE(fact_cldcon,facttemps)
	957	LOGICAL, SAVE :: ok_newmicro
[2469]	958	!$OMP THREADPRIVATE(ok_newmicro)
[524]	959
[3461]	960	INTEGER, SAVE :: iflag_cld_th
[2469]	961	!$OMP THREADPRIVATE(iflag_cld_th)
[2877]	962	!IM logical ptconv(klon,klev) !passe dans phys_local_var_mod
[2469]	963	!IM cf. AM 081204 BEG
[3461]	964	LOGICAL ptconvth(klon,klev)
[2469]	965	!IM cf. AM 081204 END
	966	!
	967	! Variables liees a l'ecriture de la bande histoire physique
	968	!
	969	!======================================================================
	970	!
	971	!
[2799]	972	!JLD integer itau_w ! pas de temps ecriture = itap + itau_phy
[2469]	973	!
	974	!
	975	! Variables locales pour effectuer les appels en serie
	976	!
	977	!IM RH a 2m (la surface)
	978	REAL Lheat
[524]	979
[2469]	980	INTEGER length
	981	PARAMETER ( length = 100 )
	982	REAL tabcntr0( length )
	983	!
[2799]	984	!JLD INTEGER ndex2d(nbp_lon*nbp_lat)
[2469]	985	!IM
	986	!
	987	!IM AMIP2 BEG
[2799]	988	!JLD REAL moyglo, mountor
[2469]	989	!IM 141004 BEG
	990	REAL zustrdr(klon), zvstrdr(klon)
	991	REAL zustrli(klon), zvstrli(klon)
	992	REAL zustrph(klon), zvstrph(klon)
	993	REAL aam, torsfc
	994	!IM 141004 END
	995	!IM 190504 BEG
	996	! INTEGER imp1jmp1
	997	! PARAMETER(imp1jmp1=(iim+1)*jjmp1)
	998	!ym A voir plus tard
	999	! REAL zx_tmp((nbp_lon+1)*nbp_lat)
	1000	! REAL airedyn(nbp_lon+1,nbp_lat)
	1001	!IM 190504 END
[2799]	1002	!JLD LOGICAL ok_msk
	1003	!JLD REAL msk(klon)
[2469]	1004	!ym A voir plus tard
	1005	!ym REAL zm_wo(jjmp1, klev)
	1006	!IM AMIP2 END
	1007	!
	1008	REAL zx_tmp_fi2d(klon) ! variable temporaire grille physique
	1009	REAL zx_tmp_fi3d(klon,klev) ! variable temporaire pour champs 3D
[2799]	1010	!JLD REAL zx_tmp_2d(nbp_lon,nbp_lat)
	1011	!JLD REAL zx_lon(nbp_lon,nbp_lat)
	1012	!JLD REAL zx_lat(nbp_lon,nbp_lat)
[2469]	1013	!
[2630]	1014	INTEGER nid_ctesGCM
	1015	SAVE nid_ctesGCM
	1016	!$OMP THREADPRIVATE(nid_ctesGCM)
[2469]	1017	!
	1018	!IM 280405 BEG
	1019	! INTEGER nid_bilKPins, nid_bilKPave
	1020	! SAVE nid_bilKPins, nid_bilKPave
	1021	! !$OMP THREADPRIVATE(nid_bilKPins, nid_bilKPave)
	1022	!
	1023	REAL ve_lay(klon,klev) ! transport meri. de l'energie a chaque niveau vert.
	1024	REAL vq_lay(klon,klev) ! transport meri. de l'eau a chaque niveau vert.
	1025	REAL ue_lay(klon,klev) ! transport zonal de l'energie a chaque niveau vert.
	1026	REAL uq_lay(klon,klev) ! transport zonal de l'eau a chaque niveau vert.
	1027	!
[2799]	1028	!JLD REAL zjulian
	1029	!JLD SAVE zjulian
	1030	!JLD!$OMP THREADPRIVATE(zjulian)
[2590]	1031
[2799]	1032	!JLD INTEGER nhori, nvert
	1033	!JLD REAL zsto
	1034	!JLD REAL zstophy, zout
[2068]	1035
[3461]	1036	CHARACTER*20 modname
	1037	CHARACTER*80 abort_message
	1038	LOGICAL, SAVE :: ok_sync, ok_sync_omp
[2469]	1039	!$OMP THREADPRIVATE(ok_sync)
[3461]	1040	REAL date0
[524]	1041
[2469]	1042	! essai writephys
[3461]	1043	INTEGER fid_day, fid_mth, fid_ins
	1044	PARAMETER (fid_ins = 1, fid_day = 2, fid_mth = 3)
	1045	INTEGER prof2d_on, prof3d_on, prof2d_av, prof3d_av
	1046	PARAMETER (prof2d_on = 1, prof3d_on = 2, prof2d_av = 3, prof3d_av = 4)
[2469]	1047	REAL ztsol(klon)
	1048	REAL q2m(klon,nbsrf) ! humidite a 2m
[524]	1049
[2469]	1050	!IM: t2m, q2m, ustar, u10m, v10m et t2mincels, t2maxcels
	1051	CHARACTER*40 t2mincels, t2maxcels !t2m min., t2m max
[2799]	1052	CHARACTER*40 tinst, tave
[2469]	1053	REAL cldtaupi(klon,klev) ! Cloud optical thickness for
	1054	! pre-industrial (pi) aerosols
[524]	1055
[2863]	1056	INTEGER :: naero
[2469]	1057	! Aerosol optical properties
	1058	CHARACTER*4, DIMENSION(naero_grp) :: rfname
	1059	REAL, DIMENSION(klon,klev) :: mass_solu_aero ! total mass
	1060	! concentration
	1061	! for all soluble
	1062	! aerosols[ug/m3]
	1063	REAL, DIMENSION(klon,klev) :: mass_solu_aero_pi
	1064	! - " - (pre-industrial value)
[1279]	1065
[2469]	1066	! Parameters
	1067	LOGICAL ok_ade, ok_aie ! Apply aerosol (in)direct effects or not
[2738]	1068	LOGICAL ok_alw ! Apply aerosol LW effect or not
[2469]	1069	LOGICAL ok_cdnc ! ok cloud droplet number concentration (O. Boucher 01-2013)
	1070	REAL bl95_b0, bl95_b1 ! Parameter in Boucher and Lohmann (1995)
[2738]	1071	SAVE ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1
	1072	!$OMP THREADPRIVATE(ok_ade, ok_aie, ok_alw, ok_cdnc, bl95_b0, bl95_b1)
[2469]	1073	LOGICAL, SAVE :: aerosol_couple ! true : calcul des aerosols dans INCA
	1074	! false : lecture des aerosol dans un fichier
	1075	!$OMP THREADPRIVATE(aerosol_couple)
[3338]	1076	LOGICAL, SAVE :: chemistry_couple ! true : use INCA chemistry O3
	1077	! false : use offline chemistry O3
	1078	!$OMP THREADPRIVATE(chemistry_couple)
[2469]	1079	INTEGER, SAVE :: flag_aerosol
	1080	!$OMP THREADPRIVATE(flag_aerosol)
[2644]	1081	LOGICAL, SAVE :: flag_bc_internal_mixture
	1082	!$OMP THREADPRIVATE(flag_bc_internal_mixture)
[2469]	1083	!
	1084	!--STRAT AEROSOL
[2530]	1085	INTEGER, SAVE :: flag_aerosol_strat
[2469]	1086	!$OMP THREADPRIVATE(flag_aerosol_strat)
[3412]	1087	!
	1088	!--INTERACTIVE AEROSOL FEEDBACK ON RADIATION
	1089	LOGICAL, SAVE :: flag_aer_feedback
	1090	!$OMP THREADPRIVATE(flag_aer_feedback)
	1091
[2469]	1092	!c-fin STRAT AEROSOL
	1093	!
	1094	! Declaration des constantes et des fonctions thermodynamiques
	1095	!
[3461]	1096	LOGICAL,SAVE :: first=.TRUE.
[2469]	1097	!$OMP THREADPRIVATE(first)
[1279]	1098
[2788]	1099	! VARIABLES RELATED TO OZONE CLIMATOLOGIES ; all are OpenMP shared
	1100	! Note that pressure vectors are in Pa and in stricly ascending order
	1101	INTEGER,SAVE :: read_climoz ! Read ozone climatology
[2469]	1102	! (let it keep the default OpenMP shared attribute)
	1103	! Allowed values are 0, 1 and 2
	1104	! 0: do not read an ozone climatology
	1105	! 1: read a single ozone climatology that will be used day and night
	1106	! 2: read two ozone climatologies, the average day and night
	1107	! climatology and the daylight climatology
[2788]	1108	INTEGER,SAVE :: ncid_climoz ! NetCDF file identifier
	1109	REAL, POINTER, SAVE :: press_cen_climoz(:) ! Pressure levels
	1110	REAL, POINTER, SAVE :: press_edg_climoz(:) ! Edges of pressure intervals
	1111	REAL, POINTER, SAVE :: time_climoz(:) ! Time vector
	1112	CHARACTER(LEN=13), PARAMETER :: vars_climoz(2) &
	1113	= ["tro3 ","tro3_daylight"]
	1114	! vars_climoz(1:read_climoz): variables names in climoz file.
[2819]	1115	! vars_climoz(1:read_climoz-2) if read_climoz>2 (temporary)
	1116	REAL :: ro3i ! 0<=ro3i<=360 ; required time index in NetCDF file for
	1117	! the ozone fields, old method.
[1279]	1118
[2469]	1119	include "YOMCST.h"
	1120	include "YOETHF.h"
	1121	include "FCTTRE.h"
	1122	!IM 100106 BEG : pouvoir sortir les ctes de la physique
	1123	include "conema3.h"
	1124	include "fisrtilp.h"
	1125	include "nuage.h"
	1126	include "compbl.h"
	1127	!IM 100106 END : pouvoir sortir les ctes de la physique
	1128	!
	1129	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1130	! Declarations pour Simulateur COSP
	1131	!============================================================
[3511]	1132	real :: mr_ozone(klon,klev), phicosp(klon,klev)
[3370]	1133
[2469]	1134	!IM stations CFMIP
	1135	INTEGER, SAVE :: nCFMIP
	1136	!$OMP THREADPRIVATE(nCFMIP)
	1137	INTEGER, PARAMETER :: npCFMIP=120
	1138	INTEGER, ALLOCATABLE, SAVE :: tabCFMIP(:)
	1139	REAL, ALLOCATABLE, SAVE :: lonCFMIP(:), latCFMIP(:)
	1140	!$OMP THREADPRIVATE(tabCFMIP, lonCFMIP, latCFMIP)
	1141	INTEGER, ALLOCATABLE, SAVE :: tabijGCM(:)
	1142	REAL, ALLOCATABLE, SAVE :: lonGCM(:), latGCM(:)
	1143	!$OMP THREADPRIVATE(tabijGCM, lonGCM, latGCM)
	1144	INTEGER, ALLOCATABLE, SAVE :: iGCM(:), jGCM(:)
	1145	!$OMP THREADPRIVATE(iGCM, jGCM)
	1146	logical, dimension(nfiles) :: phys_out_filestations
	1147	logical, parameter :: lNMC=.FALSE.
[1539]	1148
[2469]	1149	!IM betaCRF
	1150	REAL, SAVE :: pfree, beta_pbl, beta_free
	1151	!$OMP THREADPRIVATE(pfree, beta_pbl, beta_free)
	1152	REAL, SAVE :: lon1_beta, lon2_beta, lat1_beta, lat2_beta
	1153	!$OMP THREADPRIVATE(lon1_beta, lon2_beta, lat1_beta, lat2_beta)
	1154	LOGICAL, SAVE :: mskocean_beta
	1155	!$OMP THREADPRIVATE(mskocean_beta)
	1156	REAL, dimension(klon, klev) :: beta ! facteur sur cldtaurad et
	1157	! cldemirad pour evaluer les
	1158	! retros liees aux CRF
	1159	REAL, dimension(klon, klev) :: cldtaurad ! epaisseur optique
	1160	! pour radlwsw pour
	1161	! tester "CRF off"
	1162	REAL, dimension(klon, klev) :: cldtaupirad ! epaisseur optique
	1163	! pour radlwsw pour
	1164	! tester "CRF off"
	1165	REAL, dimension(klon, klev) :: cldemirad ! emissivite pour
	1166	! radlwsw pour tester
	1167	! "CRF off"
	1168	REAL, dimension(klon, klev) :: cldfrarad ! fraction nuageuse
[1735]	1169
[3418]	1170	#ifdef INCA
	1171	! set de variables utilisees pour l'initialisation des valeurs provenant de INCA
	1172	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_tauinca
	1173	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_pizinca
	1174	REAL, DIMENSION(klon,klev,naero_grp,nbands) :: init_cginca
	1175	REAL, DIMENSION(klon,klev,nbands) :: init_ccminca
	1176	#endif
	1177	REAL, DIMENSION(klon,nbtr) :: init_source
	1178
[3048]	1179	!lwoff=y : offset LW CRE for radiation code and other schemes
	1180	REAL, SAVE :: betalwoff
	1181	!OMP THREADPRIVATE(betalwoff)
	1182	!
[2469]	1183	INTEGER :: nbtr_tmp ! Number of tracer inside concvl
	1184	REAL, dimension(klon,klev) :: sh_in ! Specific humidity entering in phytrac
[2784]	1185	REAL, dimension(klon,klev) :: ch_in ! Condensed humidity entering in phytrac (eau liquide)
[2469]	1186	integer iostat
[1539]	1187
[2469]	1188	REAL zzz
	1189	!albedo SB >>>
[3461]	1190	REAL,DIMENSION(6), SAVE :: SFRWL
[3435]	1191	!$OMP THREADPRIVATE(SFRWL)
[2469]	1192	!albedo SB <<<
[1955]	1193
[2485]	1194	!--OB variables for mass fixer (hard coded for now)
[3461]	1195	LOGICAL, PARAMETER :: mass_fixer=.FALSE.
	1196	REAL qql1(klon),qql2(klon),corrqql
[2476]	1197
[3110]	1198	REAL pi
	1199
	1200	pi = 4. * ATAN(1.)
	1201
[2469]	1202	! Ehouarn: set value of jjmp1 since it is no longer a "fixed parameter"
	1203	jjmp1=nbp_lat
[2344]	1204
[2469]	1205	!======================================================================
	1206	! Gestion calendrier : mise a jour du module phys_cal_mod
	1207	!
	1208	pdtphys=pdtphys_
	1209	CALL update_time(pdtphys)
[3435]	1210	phys_tstep=NINT(pdtphys)
	1211	#ifdef CPP_XIOS
	1212	IF (.NOT. debut .AND. is_omp_master) CALL xios_update_calendar(itap+1)
	1213	#endif
[1355]	1214
[2469]	1215	!======================================================================
	1216	! Ecriture eventuelle d'un profil verticale en entree de la physique.
	1217	! Utilise notamment en 1D mais peut etre active egalement en 3D
	1218	! en imposant la valeur de igout.
	1219	!======================================================================d
[2692]	1220	IF (prt_level.ge.1) THEN
[2469]	1221	igout=klon/2+1/klon
	1222	write(lunout,*) 'DEBUT DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	1223	write(lunout,*) 'igout, lat, lon ',igout, latitude_deg(igout), &
	1224	longitude_deg(igout)
	1225	write(lunout,*) &
	1226	'nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys'
	1227	write(lunout,*) &
	1228	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur,pdtphys
[879]	1229
[2469]	1230	write(lunout,*) 'paprs, play, phi, u, v, t'
[2692]	1231	DO k=1,klev
[2469]	1232	write(lunout,*) paprs(igout,k),pplay(igout,k),pphi(igout,k), &
	1233	u(igout,k),v(igout,k),t(igout,k)
[2692]	1234	ENDDO
[2469]	1235	write(lunout,*) 'ovap (g/kg), oliq (g/kg)'
[2692]	1236	DO k=1,klev
[2469]	1237	write(lunout,) qx(igout,k,1)1000,qx(igout,k,2)*1000.
[2692]	1238	ENDDO
	1239	ENDIF
[879]	1240
[2769]	1241	! Quick check on pressure levels:
[3461]	1242	CALL assert(paprs(:, nbp_lev + 1) < paprs(:, nbp_lev), &
[2769]	1243	"physiq_mod paprs bad order")
[879]	1244
[2692]	1245	IF (first) THEN
[3435]	1246	CALL init_etat0_limit_unstruct
	1247	IF (.NOT. create_etat0_limit) CALL init_limit_read(days_elapsed)
[2469]	1248	!CR:nvelles variables convection/poches froides
	1249
[3461]	1250	WRITE(lunout,*) '================================================='
	1251	WRITE(lunout,*) 'Allocation des variables locales et sauvegardees'
	1252	WRITE(lunout,*) '================================================='
[2692]	1253	CALL phys_local_var_init
[2469]	1254	!
	1255	! appel a la lecture du run.def physique
[2692]	1256	CALL conf_phys(ok_journe, ok_mensuel, &
[2469]	1257	ok_instan, ok_hf, &
	1258	ok_LES, &
	1259	callstats, &
	1260	solarlong0,seuil_inversion, &
	1261	fact_cldcon, facttemps,ok_newmicro,iflag_radia, &
	1262	iflag_cld_th,iflag_ratqs,ratqsbas,ratqshaut,tau_ratqs, &
[3479]	1263	ok_ade, ok_aie, ok_alw, ok_cdnc, ok_volcan, aerosol_couple, &
	1264	chemistry_couple, &
[3630]	1265	flag_aerosol, flag_aerosol_strat, flag_aer_feedback, &
[2644]	1266	flag_bc_internal_mixture, bl95_b0, bl95_b1, &
[2469]	1267	! nv flags pour la convection et les
	1268	! poches froides
	1269	read_climoz, &
	1270	alp_offset)
[2692]	1271	CALL phys_state_var_init(read_climoz)
	1272	CALL phys_output_var_init
[3522]	1273	IF (read_climoz>=1 .AND. create_etat0_limit .AND. grid_type==unstructured) &
	1274	CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3435]	1275
[3522]	1276	#ifdef CPP_StratAer
	1277	CALL strataer_init
	1278	#endif
	1279
[2469]	1280	print*, '================================================='
	1281	!
	1282	!CR: check sur le nb de traceurs de l eau
[2692]	1283	IF ((iflag_ice_thermo.gt.0).and.(nqo==2)) THEN
[2469]	1284	WRITE (lunout, *) ' iflag_ice_thermo==1 requires 3 H2O tracers ', &
	1285	'(H2Ov, H2Ol, H2Oi) but nqo=', nqo, '. Might as well stop here.'
[3531]	1286	abort_message='see above'
	1287	CALL abort_physic(modname,abort_message,1)
[2692]	1288	ENDIF
[2224]	1289
[3154]	1290	Ncvpaseq1 = 0
[2469]	1291	dnwd0=0.0
	1292	ftd=0.0
	1293	fqd=0.0
	1294	cin=0.
	1295	!ym Attention pbase pas initialise dans concvl !!!!
	1296	pbase=0
	1297	!IM 180608
[904]	1298
[2469]	1299	itau_con=0
[3461]	1300	first=.FALSE.
[1797]	1301
[2692]	1302	ENDIF ! first
[1797]	1303
[2469]	1304	!ym => necessaire pour iflag_con != 2
	1305	pmfd(:,:) = 0.
	1306	pen_u(:,:) = 0.
	1307	pen_d(:,:) = 0.
	1308	pde_d(:,:) = 0.
	1309	pde_u(:,:) = 0.
	1310	aam=0.
	1311	d_t_adjwk(:,:)=0
	1312	d_q_adjwk(:,:)=0
[1797]	1313
[2469]	1314	alp_bl_conv(:)=0.
[2245]	1315
[2469]	1316	torsfc=0.
	1317	forall (k=1: nbp_lev) zmasse(:, k) = (paprs(:, k)-paprs(:, k+1)) / rg
[1797]	1318
[2469]	1319	modname = 'physiq'
[644]	1320
[2469]	1321	IF (debut) THEN
	1322	CALL suphel ! initialiser constantes et parametres phys.
[3327]	1323	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1324	tau_gl=5.
	1325	CALL getin_p('tau_gl', tau_gl)
	1326	! tau_gl : constante de rappel de la temperature a la surface de la glace - en
	1327	! secondes
	1328	tau_gl=86400.*tau_gl
[3461]	1329	WRITE(lunout,*) 'debut physiq_mod tau_gl=',tau_gl
	1330
[3490]	1331	iflag_bug_t2m_ipslcm61 = 1
[3489]	1332	CALL getin_p('iflag_bug_t2m_ipslcm61', iflag_bug_t2m_ipslcm61)
[3490]	1333	iflag_bug_t2m_stab_ipslcm61 = -1
[3489]	1334	CALL getin_p('iflag_bug_t2m_stab_ipslcm61', iflag_bug_t2m_stab_ipslcm61)
	1335
[3000]	1336	CALL getin_p('iflag_alp_wk_cond', iflag_alp_wk_cond)
[2469]	1337	CALL getin_p('random_notrig_max',random_notrig_max)
[2882]	1338	CALL getin_p('ok_adjwk',ok_adjwk)
	1339	IF (ok_adjwk) iflag_adjwk=2 ! for compatibility with older versions
	1340	! iflag_adjwk: ! 0 = Default: no convective adjustment of w-region
	1341	! 1 => convective adjustment but state variables are unchanged
	1342	! 2 => convective adjustment and state variables are changed
	1343	CALL getin_p('iflag_adjwk',iflag_adjwk)
[3150]	1344	CALL getin_p('dtcon_multistep_max',dtcon_multistep_max)
	1345	CALL getin_p('dqcon_multistep_max',dqcon_multistep_max)
[2613]	1346	CALL getin_p('oliqmax',oliqmax)
[2657]	1347	CALL getin_p('oicemax',oicemax)
[2534]	1348	CALL getin_p('ratqsp0',ratqsp0)
	1349	CALL getin_p('ratqsdp',ratqsdp)
[2635]	1350	iflag_wake_tend = 0
	1351	CALL getin_p('iflag_wake_tend',iflag_wake_tend)
[2799]	1352	ok_bad_ecmwf_thermo=.TRUE. ! By default thermodynamical constants are set
	1353	! in rrtm/suphec.F90 (and rvtmp2 is set to 0).
	1354	CALL getin_p('ok_bad_ecmwf_thermo',ok_bad_ecmwf_thermo)
[3134]	1355	CALL getin_p('ok_bug_cv_trac',ok_bug_cv_trac)
[3180]	1356	CALL getin_p('ok_bug_split_th',ok_bug_split_th)
[2799]	1357	fl_ebil = 0 ! by default, conservation diagnostics are desactivated
	1358	CALL getin_p('fl_ebil',fl_ebil)
	1359	fl_cor_ebil = 0 ! by default, no correction to ensure energy conservation
	1360	CALL getin_p('fl_cor_ebil',fl_cor_ebil)
[2984]	1361	iflag_phytrac = 1 ! by default we do want to call phytrac
[2973]	1362	CALL getin_p('iflag_phytrac',iflag_phytrac)
[3776]	1363	#ifdef CPP_Dust
	1364	IF (iflag_phytrac.EQ.0) THEN
	1365	WRITE(lunout,*) 'In order to run with SPLA, iflag_phytrac will be forced to 1'
	1366	iflag_phytrac = 1
	1367	ENDIF
	1368	#endif
[3011]	1369	nvm_lmdz = 13
	1370	CALL getin_p('NVM',nvm_lmdz)
[3387]	1371
[3461]	1372	WRITE(lunout,*) 'iflag_alp_wk_cond=', iflag_alp_wk_cond
	1373	WRITE(lunout,*) 'random_ntrig_max=', random_notrig_max
	1374	WRITE(lunout,*) 'ok_adjwk=', ok_adjwk
	1375	WRITE(lunout,*) 'iflag_adjwk=', iflag_adjwk
	1376	WRITE(lunout,*) 'qtcon_multistep_max=',dtcon_multistep_max
	1377	WRITE(lunout,*) 'qdcon_multistep_max=',dqcon_multistep_max
	1378	WRITE(lunout,*) 'ratqsp0=', ratqsp0
	1379	WRITE(lunout,*) 'ratqsdp=', ratqsdp
	1380	WRITE(lunout,*) 'iflag_wake_tend=', iflag_wake_tend
	1381	WRITE(lunout,*) 'ok_bad_ecmwf_thermo=',ok_bad_ecmwf_thermo
	1382	WRITE(lunout,*) 'ok_bug_cv_trac=', ok_bug_cv_trac
	1383	WRITE(lunout,*) 'ok_bug_split_th=', ok_bug_split_th
	1384	WRITE(lunout,*) 'fl_ebil=', fl_ebil
	1385	WRITE(lunout,*) 'fl_cor_ebil=', fl_cor_ebil
	1386	WRITE(lunout,*) 'iflag_phytrac=', iflag_phytrac
	1387	WRITE(lunout,*) 'NVM=', nvm_lmdz
	1388
[3387]	1389	!--PC: defining fields to be exchanged between LMDz, ORCHIDEE and NEMO
	1390	WRITE(lunout,*) 'Call to infocfields from physiq'
	1391	CALL infocfields_init
	1392
[2469]	1393	ENDIF
[878]	1394
[2692]	1395	IF (prt_level.ge.1) print *,'CONVERGENCE PHYSIQUE THERM 1 '
[1279]	1396
[2469]	1397	!======================================================================
	1398	! Gestion calendrier : mise a jour du module phys_cal_mod
	1399	!
	1400	! CALL phys_cal_update(jD_cur,jH_cur)
[1279]	1401
[2469]	1402	!
	1403	! Si c'est le debut, il faut initialiser plusieurs choses
	1404	! ********
	1405	!
	1406	IF (debut) THEN
	1407	!rv CRinitialisation de wght_th et lalim_conv pour la
	1408	!definition de la couche alimentation de la convection a partir
	1409	!des caracteristiques du thermique
	1410	wght_th(:,:)=1.
	1411	lalim_conv(:)=1
	1412	!RC
	1413	ustar(:,:)=0.
[2569]	1414	! u10m(:,:)=0.
	1415	! v10m(:,:)=0.
[2469]	1416	rain_con(:)=0.
	1417	snow_con(:)=0.
	1418	topswai(:)=0.
	1419	topswad(:)=0.
	1420	solswai(:)=0.
	1421	solswad(:)=0.
[959]	1422
[2469]	1423	wmax_th(:)=0.
	1424	tau_overturning_th(:)=0.
[645]	1425
[2469]	1426	IF (type_trac == 'inca') THEN
	1427	! jg : initialisation jusqu'au ces variables sont dans restart
	1428	ccm(:,:,:) = 0.
	1429	tau_aero(:,:,:,:) = 0.
	1430	piz_aero(:,:,:,:) = 0.
	1431	cg_aero(:,:,:,:) = 0.
[2372]	1432
[2469]	1433	config_inca='none' ! default
	1434	CALL getin_p('config_inca',config_inca)
[2372]	1435
[2469]	1436	ELSE
	1437	config_inca='none' ! default
[2692]	1438	ENDIF
[782]	1439
[3435]	1440	tau_aero(:,:,:,:) = 1.e-15
	1441	piz_aero(:,:,:,:) = 1.
	1442	cg_aero(:,:,:,:) = 0.
	1443
[2469]	1444	IF (aerosol_couple .AND. (config_inca /= "aero" &
	1445	.AND. config_inca /= "aeNP ")) THEN
	1446	abort_message &
	1447	= 'if aerosol_couple is activated, config_inca need to be ' &
	1448	// 'aero or aeNP'
	1449	CALL abort_physic (modname,abort_message,1)
	1450	ENDIF
[2443]	1451
[2469]	1452	rnebcon0(:,:) = 0.0
	1453	clwcon0(:,:) = 0.0
	1454	rnebcon(:,:) = 0.0
	1455	clwcon(:,:) = 0.0
[1863]	1456
[2469]	1457	!
	1458	print*,'iflag_coupl,iflag_clos,iflag_wake', &
	1459	iflag_coupl,iflag_clos,iflag_wake
[3317]	1460	print*,'iflag_cycle_diurne', iflag_cycle_diurne
[2469]	1461	!
	1462	IF (iflag_con.EQ.2.AND.iflag_cld_th.GT.-1) THEN
	1463	abort_message = 'Tiedtke needs iflag_cld_th=-2 or -1'
	1464	CALL abort_physic (modname,abort_message,1)
	1465	ENDIF
	1466	!
	1467	!
	1468	! Initialiser les compteurs:
	1469	!
	1470	itap = 0
	1471	itaprad = 0
[2707]	1472	itapcv = 0
[2730]	1473	itapwk = 0
[878]	1474
[2469]	1475	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1476	!! Un petit travail \`a faire ici.
	1477	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[878]	1478
[2692]	1479	IF (iflag_pbl>1) THEN
[2469]	1480	PRINT*, "Using method MELLOR&YAMADA"
[2692]	1481	ENDIF
[956]	1482
[2469]	1483	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1484	! FH 2008/05/02 changement lie a la lecture de nbapp_rad dans
	1485	! phylmd plutot que dyn3d
	1486	! Attention : la version precedente n'etait pas tres propre.
	1487	! Il se peut qu'il faille prendre une valeur differente de nbapp_rad
	1488	! pour obtenir le meme resultat.
[2731]	1489	!jyg for fh<
[3435]	1490	WRITE(lunout,*) 'Pas de temps phys_tstep pdtphys ',phys_tstep,pdtphys
	1491	IF (abs(phys_tstep-pdtphys)>1.e-10) THEN
[2731]	1492	abort_message='pas de temps doit etre entier en seconde pour orchidee et XIOS'
	1493	CALL abort_physic(modname,abort_message,1)
	1494	ENDIF
	1495	!>jyg
[3435]	1496	IF (MOD(NINT(86400./phys_tstep),nbapp_rad).EQ.0) THEN
	1497	radpas = NINT( 86400./phys_tstep)/nbapp_rad
[2469]	1498	ELSE
	1499	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1500	'multiple de nbapp_rad'
	1501	WRITE(lunout,*) 'changer nbapp_rad ou alors commenter ce test ', &
	1502	'mais 1+1<>2'
	1503	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1504	// 'de nbapp_rad'
[2692]	1505	CALL abort_physic(modname,abort_message,1)
[2469]	1506	ENDIF
[3435]	1507	IF (nbapp_cv .EQ. 0) nbapp_cv=86400./phys_tstep
	1508	IF (nbapp_wk .EQ. 0) nbapp_wk=86400./phys_tstep
[2730]	1509	print *,'physiq, nbapp_cv, nbapp_wk ',nbapp_cv,nbapp_wk
[3435]	1510	IF (MOD(NINT(86400./phys_tstep),nbapp_cv).EQ.0) THEN
	1511	cvpas_0 = NINT( 86400./phys_tstep)/nbapp_cv
[3150]	1512	cvpas = cvpas_0
[2707]	1513	print *,'physiq, cvpas ',cvpas
	1514	ELSE
	1515	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1516	'multiple de nbapp_cv'
	1517	WRITE(lunout,*) 'changer nbapp_cv ou alors commenter ce test ', &
	1518	'mais 1+1<>2'
	1519	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1520	// 'de nbapp_cv'
[3461]	1521	CALL abort_physic(modname,abort_message,1)
[2707]	1522	ENDIF
[3435]	1523	IF (MOD(NINT(86400./phys_tstep),nbapp_wk).EQ.0) THEN
	1524	wkpas = NINT( 86400./phys_tstep)/nbapp_wk
[3457]	1525	! print *,'physiq, wkpas ',wkpas
[2730]	1526	ELSE
	1527	WRITE(lunout,*) 'le nombre de pas de temps physique doit etre un ', &
	1528	'multiple de nbapp_wk'
	1529	WRITE(lunout,*) 'changer nbapp_wk ou alors commenter ce test ', &
	1530	'mais 1+1<>2'
	1531	abort_message='nbre de pas de temps physique n est pas multiple ' &
	1532	// 'de nbapp_wk'
[3461]	1533	CALL abort_physic(modname,abort_message,1)
[2730]	1534	ENDIF
[2469]	1535	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3465]	1536	CALL init_iophy_new(latitude_deg,longitude_deg)
[524]	1537
[3435]	1538	!===================================================================
	1539	!IM stations CFMIP
	1540	nCFMIP=npCFMIP
	1541	OPEN(98,file='npCFMIP_param.data',status='old', &
	1542	form='formatted',iostat=iostat)
	1543	IF (iostat == 0) THEN
	1544	READ(98,*,end=998) nCFMIP
	1545	998 CONTINUE
	1546	CLOSE(98)
	1547	CONTINUE
	1548	IF(nCFMIP.GT.npCFMIP) THEN
	1549	print*,'nCFMIP > npCFMIP : augmenter npCFMIP et recompiler'
	1550	CALL abort_physic("physiq", "", 1)
	1551	ELSE
	1552	print*,'physiq npCFMIP=',npCFMIP,'nCFMIP=',nCFMIP
	1553	ENDIF
	1554
	1555	!
	1556	ALLOCATE(tabCFMIP(nCFMIP))
	1557	ALLOCATE(lonCFMIP(nCFMIP), latCFMIP(nCFMIP))
	1558	ALLOCATE(tabijGCM(nCFMIP))
	1559	ALLOCATE(lonGCM(nCFMIP), latGCM(nCFMIP))
	1560	ALLOCATE(iGCM(nCFMIP), jGCM(nCFMIP))
	1561	!
	1562	! lecture des nCFMIP stations CFMIP, de leur numero
	1563	! et des coordonnees geographiques lonCFMIP, latCFMIP
	1564	!
	1565	CALL read_CFMIP_point_locations(nCFMIP, tabCFMIP, &
	1566	lonCFMIP, latCFMIP)
	1567	!
	1568	! identification des
	1569	! 1) coordonnees lonGCM, latGCM des points CFMIP dans la
	1570	! grille de LMDZ
	1571	! 2) indices points tabijGCM de la grille physique 1d sur
	1572	! klon points
	1573	! 3) indices iGCM, jGCM de la grille physique 2d
	1574	!
	1575	CALL LMDZ_CFMIP_point_locations(nCFMIP, lonCFMIP, latCFMIP, &
	1576	tabijGCM, lonGCM, latGCM, iGCM, jGCM)
	1577	!
	1578	ELSE
	1579	ALLOCATE(tabijGCM(0))
	1580	ALLOCATE(lonGCM(0), latGCM(0))
	1581	ALLOCATE(iGCM(0), jGCM(0))
	1582	ENDIF
	1583
	1584	#ifdef CPP_IOIPSL
	1585
	1586	!$OMP MASTER
	1587	! FH : if ok_sync=.true. , the time axis is written at each time step
	1588	! in the output files. Only at the end in the opposite case
[3461]	1589	ok_sync_omp=.FALSE.
[3435]	1590	CALL getin('ok_sync',ok_sync_omp)
	1591	CALL phys_output_open(longitude_deg,latitude_deg,nCFMIP,tabijGCM, &
	1592	iGCM,jGCM,lonGCM,latGCM, &
	1593	jjmp1,nlevSTD,clevSTD,rlevSTD, phys_tstep,ok_veget, &
	1594	type_ocean,iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
	1595	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, &
	1596	read_climoz, phys_out_filestations, &
[3630]	1597	aerosol_couple, &
[3435]	1598	flag_aerosol_strat, pdtphys, paprs, pphis, &
	1599	pplay, lmax_th, ptconv, ptconvth, ivap, &
	1600	d_u, d_t, qx, d_qx, zmasse, ok_sync_omp)
	1601	!$OMP END MASTER
	1602	!$OMP BARRIER
	1603	ok_sync=ok_sync_omp
	1604
	1605	freq_outNMC(1) = ecrit_files(7)
	1606	freq_outNMC(2) = ecrit_files(8)
	1607	freq_outNMC(3) = ecrit_files(9)
	1608	WRITE(lunout,*)'OK freq_outNMC(1)=',freq_outNMC(1)
	1609	WRITE(lunout,*)'OK freq_outNMC(2)=',freq_outNMC(2)
	1610	WRITE(lunout,*)'OK freq_outNMC(3)=',freq_outNMC(3)
	1611
	1612	#ifndef CPP_XIOS
	1613	CALL ini_paramLMDZ_phy(phys_tstep,nid_ctesGCM)
	1614	#endif
	1615
	1616	#endif
	1617	ecrit_reg = ecrit_reg * un_jour
	1618	ecrit_tra = ecrit_tra * un_jour
	1619
	1620	!XXXPB Positionner date0 pour initialisation de ORCHIDEE
	1621	date0 = jD_ref
	1622	WRITE(,) 'physiq date0 : ',date0
	1623	!
	1624
	1625	! CALL create_climoz(read_climoz)
[3472]	1626	IF (.NOT. create_etat0_limit) CALL init_aero_fromfile(flag_aerosol) !! initialise aero from file for XIOS interpolation (unstructured_grid)
	1627	IF (.NOT. create_etat0_limit) CALL init_readaerosolstrato(flag_aerosol_strat) !! initialise aero strato from file for XIOS interpolation (unstructured_grid)
[3435]	1628
	1629	#ifdef CPP_COSP
	1630	IF (ok_cosp) THEN
[3726]	1631	! DO k = 1, klev
	1632	! DO i = 1, klon
	1633	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1634	! ENDDO
	1635	! ENDDO
[3465]	1636	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[3435]	1637	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1638	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1639	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1640	JrNt,ref_liq,ref_ice, &
	1641	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1642	zu10m,zv10m,pphis, &
	1643	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1644	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1645	prfl(:,1:klev),psfl(:,1:klev), &
	1646	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1647	mr_ozone,cldtau, cldemi)
[3778]	1648	ENDIF
	1649	#endif
[3512]	1650
	1651	#ifdef CPP_COSP2
	1652	IF (ok_cosp) THEN
[3726]	1653	! DO k = 1, klev
	1654	! DO i = 1, klon
	1655	! phicosp(i,k) = pphi(i,k) + pphis(i)
	1656	! ENDDO
	1657	! ENDDO
[3512]	1658	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
	1659	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1660	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1661	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1662	JrNt,ref_liq,ref_ice, &
	1663	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1664	zu10m,zv10m,pphis, &
	1665	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1666	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1667	prfl(:,1:klev),psfl(:,1:klev), &
	1668	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1669	mr_ozone,cldtau, cldemi)
	1670	ENDIF
	1671	#endif
	1672
	1673	#ifdef CPP_COSPV2
	1674	IF (ok_cosp) THEN
	1675	DO k = 1, klev
	1676	DO i = 1, klon
	1677	phicosp(i,k) = pphi(i,k) + pphis(i)
	1678	ENDDO
	1679	ENDDO
	1680	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	1681	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	1682	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	1683	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	1684	JrNt,ref_liq,ref_ice, &
	1685	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	1686	zu10m,zv10m,pphis, &
	1687	phicosp,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	1688	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	1689	prfl(:,1:klev),psfl(:,1:klev), &
	1690	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	1691	mr_ozone,cldtau, cldemi)
	1692	ENDIF
	1693	#endif
	1694
[3460]	1695	!
[3465]	1696	!
	1697	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3460]	1698	! Nouvelle initialisation pour le rayonnement RRTM
[3465]	1699	!
	1700	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[3435]	1701
[3460]	1702	CALL iniradia(klon,klev,paprs(1,1:klev+1))
[3776]	1703
	1704	! Initialisation des champs dans phytrac* qui sont utilisés par phys_output_write*
	1705	#ifdef CPP_Dust
	1706	! Quand on utilise SPLA, on force iflag_phytrac=1
	1707	CALL phytracr_spl_out_init()
	1708	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	1709	pplay, lmax_th, aerosol_couple, &
	1710	ok_ade, ok_aie, ivap, ok_sync, &
	1711	ptconv, read_climoz, clevSTD, &
	1712	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	1713	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	1714	#else
	1715	! phys_output_write écrit des variables traceurs seulement si iflag_phytrac == 1
	1716	! donc seulement dans ce cas on doit appeler phytrac_init()
[3465]	1717	IF (iflag_phytrac == 1 ) THEN
	1718	CALL phytrac_init()
[3776]	1719	ENDIF
[3465]	1720	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	1721	pplay, lmax_th, aerosol_couple, &
[3630]	1722	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, ok_sync,&
[3465]	1723	ptconv, read_climoz, clevSTD, &
	1724	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
	1725	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[3776]	1726	#endif
[3460]	1727
[3776]	1728
[3435]	1729	#ifdef CPP_XIOS
	1730	IF (is_omp_master) CALL xios_update_calendar(1)
	1731	#endif
[3465]	1732	IF(read_climoz>=1 .AND. create_etat0_limit) CALL regr_horiz_time_climoz(read_climoz,ok_daily_climoz)
[3887]	1733	CALL create_etat0_limit_unstruct
	1734	CALL phyetat0 ("startphy.nc",clesphy0,tabcntr0)
[3435]	1735
[3465]	1736	!jyg<
[3577]	1737	IF (iflag_pbl<=1) THEN
	1738	! No TKE for Standard Physics
	1739	pbl_tke(:,:,:)=0.
	1740
	1741	ELSE IF (klon_glo==1) THEN
[3465]	1742	pbl_tke(:,:,is_ave) = 0.
	1743	DO nsrf=1,nbsrf
	1744	DO k = 1,klev+1
	1745	pbl_tke(:,k,is_ave) = pbl_tke(:,k,is_ave) &
	1746	+pctsrf(:,nsrf)*pbl_tke(:,k,nsrf)
	1747	ENDDO
	1748	ENDDO
	1749	ELSE
	1750	pbl_tke(:,:,is_ave) = 0. !ym missing init : maybe must be initialized in the same way that for klon_glo==1 ??
	1751	!>jyg
	1752	ENDIF
[2469]	1753	!IM begin
	1754	print*,'physiq: clwcon rnebcon ratqs',clwcon(1,1),rnebcon(1,1) &
	1755	,ratqs(1,1)
	1756	!IM end
[878]	1757
	1758
[2469]	1759	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1760	!
	1761	! on remet le calendrier a zero
	1762	!
	1763	IF (raz_date .eq. 1) THEN
	1764	itau_phy = 0
	1765	ENDIF
[524]	1766
[3435]	1767	! IF (ABS(phys_tstep-pdtphys).GT.0.001) THEN
	1768	! WRITE(lunout,*) 'Pas physique n est pas correct',phys_tstep, &
	1769	! pdtphys
	1770	! abort_message='Pas physique n est pas correct '
	1771	! ! call abort_physic(modname,abort_message,1)
	1772	! phys_tstep=pdtphys
	1773	! ENDIF
[2469]	1774	IF (nlon .NE. klon) THEN
	1775	WRITE(lunout,*)'nlon et klon ne sont pas coherents', nlon, &
	1776	klon
	1777	abort_message='nlon et klon ne sont pas coherents'
[2692]	1778	CALL abort_physic(modname,abort_message,1)
[2469]	1779	ENDIF
	1780	IF (nlev .NE. klev) THEN
	1781	WRITE(lunout,*)'nlev et klev ne sont pas coherents', nlev, &
	1782	klev
	1783	abort_message='nlev et klev ne sont pas coherents'
[2692]	1784	CALL abort_physic(modname,abort_message,1)
[2469]	1785	ENDIF
	1786	!
[3435]	1787	IF (phys_tstep*REAL(radpas).GT.21600..AND.iflag_cycle_diurne.GE.1) THEN
[2469]	1788	WRITE(lunout,*)'Nbre d appels au rayonnement insuffisant'
	1789	WRITE(lunout,*)"Au minimum 4 appels par jour si cycle diurne"
	1790	abort_message='Nbre d appels au rayonnement insuffisant'
[2692]	1791	CALL abort_physic(modname,abort_message,1)
[2469]	1792	ENDIF
	1793	WRITE(lunout,*)"Clef pour la convection, iflag_con=", iflag_con
	1794	WRITE(lunout,*)"Clef pour le driver de la convection, ok_cvl=", &
	1795	ok_cvl
	1796	!
	1797	!KE43
	1798	! Initialisation pour la convection de K.E. (sb):
	1799	IF (iflag_con.GE.3) THEN
[524]	1800
[2469]	1801	WRITE(lunout,)"** Convection de Kerry Emanuel 4.3 "
	1802	WRITE(lunout,*) &
	1803	"On va utiliser le melange convectif des traceurs qui"
	1804	WRITE(lunout,*)"est calcule dans convect4.3"
	1805	WRITE(lunout,*)" !!! penser aux logical flags de phytrac"
[524]	1806
[2469]	1807	DO i = 1, klon
	1808	ema_cbmf(i) = 0.
	1809	ema_pcb(i) = 0.
	1810	ema_pct(i) = 0.
	1811	! ema_workcbmf(i) = 0.
	1812	ENDDO
	1813	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>BEG
	1814	DO i = 1, klon
	1815	ibas_con(i) = 1
	1816	itop_con(i) = 1
	1817	ENDDO
	1818	!IM15/11/02 rajout initialisation ibas_con,itop_con cf. SB =>END
	1819	!================================================================
	1820	!CR:04.12.07: initialisations poches froides
	1821	! Controle de ALE et ALP pour la fermeture convective (jyg)
[2692]	1822	IF (iflag_wake>=1) THEN
[2469]	1823	CALL ini_wake(0.,0.,it_wape_prescr,wape_prescr,fip_prescr &
	1824	,alp_bl_prescr, ale_bl_prescr)
	1825	! 11/09/06 rajout initialisation ALE et ALP du wake et PBL(YU)
	1826	! print*,'apres ini_wake iflag_cld_th=', iflag_cld_th
[2638]	1827	!
	1828	! Initialize tendencies of wake state variables (for some flag values
	1829	! they are not computed).
	1830	d_deltat_wk(:,:) = 0.
	1831	d_deltaq_wk(:,:) = 0.
	1832	d_deltat_wk_gw(:,:) = 0.
	1833	d_deltaq_wk_gw(:,:) = 0.
	1834	d_deltat_vdf(:,:) = 0.
	1835	d_deltaq_vdf(:,:) = 0.
	1836	d_deltat_the(:,:) = 0.
	1837	d_deltaq_the(:,:) = 0.
	1838	d_deltat_ajs_cv(:,:) = 0.
	1839	d_deltaq_ajs_cv(:,:) = 0.
	1840	d_s_wk(:) = 0.
	1841	d_dens_wk(:) = 0.
[2692]	1842	ENDIF
[973]	1843
[2469]	1844	! do i = 1,klon
	1845	! Ale_bl(i)=0.
	1846	! Alp_bl(i)=0.
	1847	! enddo
[1638]	1848
[3435]	1849	!ELSE
	1850	! ALLOCATE(tabijGCM(0))
	1851	! ALLOCATE(lonGCM(0), latGCM(0))
	1852	! ALLOCATE(iGCM(0), jGCM(0))
[2469]	1853	ENDIF
[878]	1854
[2469]	1855	DO i=1,klon
	1856	rugoro(i) = f_rugoro * MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1857	ENDDO
[1863]	1858
[2469]	1859	!34EK
	1860	IF (ok_orodr) THEN
[524]	1861
[2469]	1862	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1863	! FH sans doute a enlever de finitivement ou, si on le
	1864	! garde, l'activer justement quand ok_orodr = false.
	1865	! ce rugoro est utilise par la couche limite et fait double emploi
	1866	! avec les param\'etrisations sp\'ecifiques de Francois Lott.
	1867	! DO i=1,klon
	1868	! rugoro(i) = MAX(1.0e-05, zstd(i)*zsig(i)/2.0)
	1869	! ENDDO
	1870	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1871	IF (ok_strato) THEN
	1872	CALL SUGWD_strato(klon,klev,paprs,pplay)
	1873	ELSE
	1874	CALL SUGWD(klon,klev,paprs,pplay)
	1875	ENDIF
[1863]	1876
[2469]	1877	DO i=1,klon
	1878	zuthe(i)=0.
	1879	zvthe(i)=0.
[2692]	1880	IF (zstd(i).gt.10.) THEN
[2469]	1881	zuthe(i)=(1.-zgam(i))*cos(zthe(i))
	1882	zvthe(i)=(1.-zgam(i))*sin(zthe(i))
[2692]	1883	ENDIF
[2469]	1884	ENDDO
	1885	ENDIF
	1886	!
	1887	!
[3435]	1888	lmt_pas = NINT(86400./phys_tstep * 1.0) ! tous les jours
[2469]	1889	WRITE(lunout,*)'La frequence de lecture surface est de ', &
	1890	lmt_pas
	1891	!
	1892	capemaxcels = 't_max(X)'
	1893	t2mincels = 't_min(X)'
	1894	t2maxcels = 't_max(X)'
	1895	tinst = 'inst(X)'
	1896	tave = 'ave(X)'
	1897	!IM cf. AM 081204 BEG
[3465]	1898	write(lunout,*)'AVANT HIST IFLAG_CON=',iflag_con
[2469]	1899	!IM cf. AM 081204 END
	1900	!
	1901	!=============================================================
	1902	! Initialisation des sorties
	1903	!=============================================================
	1904
[3435]	1905	#ifdef CPP_XIOS
	1906	! Get "missing_val" value from XML files (from temperature variable)
	1907	!$OMP MASTER
	1908	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1909	!$OMP END MASTER
	1910	!$OMP BARRIER
	1911	missing_val=missing_val_omp
	1912	#endif
	1913
[2679]	1914	#ifdef CPP_XIOS
[3778]	1915	! Need to put this initialisation after phyetat0 as in the coupled model the XIOS context is only
	1916	! initialised at that moment
	1917	! Get "missing_val" value from XML files (from temperature variable)
	1918	!$OMP MASTER
	1919	CALL xios_get_field_attr("temp",default_value=missing_val_omp)
	1920	!$OMP END MASTER
	1921	!$OMP BARRIER
	1922	missing_val=missing_val_omp
[2679]	1923	#endif
	1924
[524]	1925
[3435]	1926	CALL printflag( tabcntr0,radpas,ok_journe, &
	1927	ok_instan, ok_region )
[2469]	1928	!
	1929	!
	1930	!
	1931	! Prescrire l'ozone dans l'atmosphere
	1932	!
	1933	!
	1934	!c DO i = 1, klon
	1935	!c DO k = 1, klev
	1936	!c CALL o3cm (paprs(i,k)/100.,paprs(i,k+1)/100., wo(i,k),20)
	1937	!c ENDDO
	1938	!c ENDDO
	1939	!
	1940	IF (type_trac == 'inca') THEN
[524]	1941	#ifdef INCA
[2469]	1942	CALL VTe(VTphysiq)
	1943	CALL VTb(VTinca)
	1944	calday = REAL(days_elapsed) + jH_cur
	1945	WRITE(lunout,*) 'initial time chemini', days_elapsed, calday
[959]	1946
[3820]	1947	call init_const_lmdz( &
	1948	ndays, nbsrf, is_oce,is_sic, is_ter,is_lic, calend, &
	1949	config_inca)
	1950
[3841]	1951	CALL init_inca_geometry( &
	1952	longitude, latitude, &
	1953	boundslon, boundslat, &
	1954	dx, dy, cell_area, ind_cell_glo)
	1955
[3820]	1956
[3841]	1957
[2469]	1958	CALL chemini( &
	1959	rg, &
	1960	ra, &
	1961	cell_area, &
	1962	latitude_deg, &
	1963	longitude_deg, &
	1964	presnivs, &
	1965	calday, &
	1966	klon, &
	1967	nqtot, &
[2566]	1968	nqo, &
[2469]	1969	pdtphys, &
	1970	annee_ref, &
[2906]	1971	year_cur, &
[2469]	1972	day_ref, &
	1973	day_ini, &
	1974	start_time, &
	1975	itau_phy, &
[2831]	1976	date0, &
[2469]	1977	io_lon, &
[3351]	1978	io_lat, &
[3418]	1979	chemistry_couple, &
	1980	init_source, &
	1981	init_tauinca, &
	1982	init_pizinca, &
	1983	init_cginca, &
	1984	init_ccminca)
[959]	1985
[3418]	1986
	1987	! initialisation des variables depuis le restart de inca
	1988	ccm(:,:,:) = init_ccminca
	1989	tau_aero(:,:,:,:) = init_tauinca
	1990	piz_aero(:,:,:,:) = init_pizinca
	1991	cg_aero(:,:,:,:) = init_cginca
	1992	!
	1993
	1994
[2469]	1995	CALL VTe(VTinca)
	1996	CALL VTb(VTphysiq)
[524]	1997	#endif
[2692]	1998	ENDIF
[3666]	1999	IF (type_trac == 'repr') THEN
	2000	#ifdef REPROBUS
	2001	CALL chemini_rep( &
	2002	presnivs, &
	2003	pdtphys, &
	2004	annee_ref, &
	2005	day_ref, &
	2006	day_ini, &
	2007	start_time, &
	2008	itau_phy, &
	2009	io_lon, &
	2010	io_lat)
	2011	#endif
	2012	ENDIF
[3465]	2013
[2469]	2014	!$omp single
[2788]	2015	IF (read_climoz >= 1) CALL open_climoz(ncid_climoz, press_cen_climoz, &
[2820]	2016	press_edg_climoz, time_climoz, ok_daily_climoz, adjust_tropopause)
[2469]	2017	!$omp end single
	2018	!
	2019	!IM betaCRF
	2020	pfree=70000. !Pa
	2021	beta_pbl=1.
	2022	beta_free=1.
	2023	lon1_beta=-180.
	2024	lon2_beta=+180.
	2025	lat1_beta=90.
	2026	lat2_beta=-90.
	2027	mskocean_beta=.FALSE.
[1539]	2028
[2469]	2029	!albedo SB >>>
[3461]	2030	SELECT CASE(nsw)
	2031	CASE(2)
[2469]	2032	SFRWL(1)=0.45538747
	2033	SFRWL(2)=0.54461211
[3461]	2034	CASE(4)
[2469]	2035	SFRWL(1)=0.45538747
	2036	SFRWL(2)=0.32870591
	2037	SFRWL(3)=0.18568763
	2038	SFRWL(4)=3.02191470E-02
[3461]	2039	CASE(6)
[2469]	2040	SFRWL(1)=1.28432794E-03
	2041	SFRWL(2)=0.12304168
	2042	SFRWL(3)=0.33106142
	2043	SFRWL(4)=0.32870591
	2044	SFRWL(5)=0.18568763
	2045	SFRWL(6)=3.02191470E-02
[3461]	2046	END SELECT
[2227]	2047
	2048
[2469]	2049	!albedo SB <<<
[2227]	2050
[2469]	2051	OPEN(99,file='beta_crf.data',status='old', &
	2052	form='formatted',err=9999)
	2053	READ(99,*,end=9998) pfree
	2054	READ(99,*,end=9998) beta_pbl
	2055	READ(99,*,end=9998) beta_free
	2056	READ(99,*,end=9998) lon1_beta
	2057	READ(99,*,end=9998) lon2_beta
	2058	READ(99,*,end=9998) lat1_beta
	2059	READ(99,*,end=9998) lat2_beta
	2060	READ(99,*,end=9998) mskocean_beta
	2061	9998 Continue
	2062	CLOSE(99)
	2063	9999 Continue
	2064	WRITE(,)'pfree=',pfree
	2065	WRITE(,)'beta_pbl=',beta_pbl
	2066	WRITE(,)'beta_free=',beta_free
	2067	WRITE(,)'lon1_beta=',lon1_beta
	2068	WRITE(,)'lon2_beta=',lon2_beta
	2069	WRITE(,)'lat1_beta=',lat1_beta
	2070	WRITE(,)'lat2_beta=',lat2_beta
	2071	WRITE(,)'mskocean_beta=',mskocean_beta
[3048]	2072
	2073	!lwoff=y : offset LW CRE for radiation code and other schemes
	2074	!lwoff=y : betalwoff=1.
	2075	betalwoff=0.
	2076	IF (ok_lwoff) THEN
	2077	betalwoff=1.
	2078	ENDIF
	2079	WRITE(,)'ok_lwoff=',ok_lwoff
	2080	!
	2081	!lwoff=y to begin only sollw and sollwdown are set up to CS values
	2082	sollw = sollw + betalwoff * (sollw0 - sollw)
	2083	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	2084	sollwdown(:))
[3597]	2085
	2086
[2469]	2087	ENDIF
	2088	!
	2089	! ************** Fin de IF ( debut ) *************
	2090	!
	2091	!
	2092	! Incrementer le compteur de la physique
	2093	!
	2094	itap = itap + 1
[2795]	2095	IF (is_master .OR. prt_level > 9) THEN
[2783]	2096	IF (prt_level > 5 .or. MOD(itap,5) == 0) THEN
[2795]	2097	WRITE(LUNOUT,*)'Entering physics elapsed seconds since start ', current_time
	2098	WRITE(LUNOUT,100)year_cur,mth_cur,day_cur,hour/3600.
	2099	100 FORMAT('Date = ',i4.4,' / ',i2.2, ' / ',i2.2,' : ',f20.17)
[2783]	2100	ENDIF
	2101	ENDIF
[2469]	2102	!
	2103	!
	2104	! Update fraction of the sub-surfaces (pctsrf) and
	2105	! initialize, where a new fraction has appeared, all variables depending
	2106	! on the surface fraction.
	2107	!
[3435]	2108	CALL change_srf_frac(itap, phys_tstep, days_elapsed+1, &
[2469]	2109	pctsrf, fevap, z0m, z0h, agesno, &
	2110	falb_dir, falb_dif, ftsol, ustar, u10m, v10m, pbl_tke)
[996]	2111
[2469]	2112	! Update time and other variables in Reprobus
	2113	IF (type_trac == 'repr') THEN
[1565]	2114	#ifdef REPROBUS
[2469]	2115	CALL Init_chem_rep_xjour(jD_cur-jD_ref+day_ref)
	2116	print*,'xjour equivalent rjourvrai',jD_cur-jD_ref+day_ref
	2117	CALL Rtime(debut)
[1565]	2118	#endif
[2692]	2119	ENDIF
[1565]	2120
[2469]	2121	! Tendances bidons pour les processus qui n'affectent pas certaines
	2122	! variables.
	2123	du0(:,:)=0.
	2124	dv0(:,:)=0.
	2125	dt0 = 0.
	2126	dq0(:,:)=0.
	2127	dql0(:,:)=0.
	2128	dqi0(:,:)=0.
[2635]	2129	dsig0(:) = 0.
	2130	ddens0(:) = 0.
	2131	wkoccur1(:)=1
[2469]	2132	!
	2133	! Mettre a zero des variables de sortie (pour securite)
	2134	!
	2135	DO i = 1, klon
	2136	d_ps(i) = 0.0
	2137	ENDDO
	2138	DO k = 1, klev
	2139	DO i = 1, klon
	2140	d_t(i,k) = 0.0
	2141	d_u(i,k) = 0.0
	2142	d_v(i,k) = 0.0
	2143	ENDDO
	2144	ENDDO
	2145	DO iq = 1, nqtot
	2146	DO k = 1, klev
	2147	DO i = 1, klon
	2148	d_qx(i,k,iq) = 0.0
	2149	ENDDO
	2150	ENDDO
	2151	ENDDO
	2152	beta_prec_fisrt(:,:)=0.
	2153	beta_prec(:,:)=0.
[3134]	2154	!
	2155	! Output variables from the convective scheme should not be set to 0
	2156	! since convection is not always called at every time step.
	2157	IF (ok_bug_cv_trac) THEN
	2158	da(:,:)=0.
	2159	mp(:,:)=0.
	2160	phi(:,:,:)=0.
	2161	! RomP >>>
	2162	phi2(:,:,:)=0.
	2163	epmlmMm(:,:,:)=0.
	2164	eplaMm(:,:)=0.
	2165	d1a(:,:)=0.
	2166	dam(:,:)=0.
	2167	pmflxr(:,:)=0.
	2168	pmflxs(:,:)=0.
	2169	! RomP <<<
	2170	ENDIF
[1742]	2171
[2469]	2172	!
	2173	! Ne pas affecter les valeurs entrees de u, v, h, et q
	2174	!
	2175	DO k = 1, klev
	2176	DO i = 1, klon
	2177	t_seri(i,k) = t(i,k)
	2178	u_seri(i,k) = u(i,k)
	2179	v_seri(i,k) = v(i,k)
	2180	q_seri(i,k) = qx(i,k,ivap)
	2181	ql_seri(i,k) = qx(i,k,iliq)
	2182	!CR: ATTENTION, on rajoute la variable glace
[2692]	2183	IF (nqo.eq.2) THEN
[2469]	2184	qs_seri(i,k) = 0.
[2692]	2185	ELSE IF (nqo.eq.3) THEN
[2469]	2186	qs_seri(i,k) = qx(i,k,isol)
[2692]	2187	ENDIF
[2469]	2188	ENDDO
	2189	ENDDO
[2476]	2190	!
	2191	!--OB mass fixer
	2192	IF (mass_fixer) THEN
	2193	!--store initial water burden
	2194	qql1(:)=0.0
[2499]	2195	DO k = 1, klev
	2196	qql1(:)=qql1(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2476]	2197	ENDDO
	2198	ENDIF
	2199	!--fin mass fixer
	2200
[2469]	2201	tke0(:,:)=pbl_tke(:,:,is_ave)
	2202	!CR:Nombre de traceurs de l'eau: nqo
	2203	! IF (nqtot.GE.3) THEN
	2204	IF (nqtot.GE.(nqo+1)) THEN
	2205	! DO iq = 3, nqtot
	2206	DO iq = nqo+1, nqtot
	2207	DO k = 1, klev
	2208	DO i = 1, klon
	2209	! tr_seri(i,k,iq-2) = qx(i,k,iq)
	2210	tr_seri(i,k,iq-nqo) = qx(i,k,iq)
	2211	ENDDO
	2212	ENDDO
	2213	ENDDO
	2214	ELSE
	2215	DO k = 1, klev
	2216	DO i = 1, klon
	2217	tr_seri(i,k,1) = 0.0
	2218	ENDDO
	2219	ENDDO
	2220	ENDIF
[3599]	2221	!
	2222	! Temporary solutions adressing ticket #104 and the non initialisation of tr_ancien
	2223	! LF
	2224	IF (debut) THEN
	2225	WRITE(lunout,*)' WARNING: tr_ancien initialised to tr_seri'
	2226	DO iq = nqo+1, nqtot
	2227	tr_ancien(:,:,iq-nqo)=tr_seri(:,:,iq-nqo)
	2228	ENDDO
	2229	ENDIF
[2469]	2230	!
	2231	DO i = 1, klon
	2232	ztsol(i) = 0.
	2233	ENDDO
	2234	DO nsrf = 1, nbsrf
	2235	DO i = 1, klon
	2236	ztsol(i) = ztsol(i) + ftsol(i,nsrf)*pctsrf(i,nsrf)
	2237	ENDDO
	2238	ENDDO
[2611]	2239	! Initialize variables used for diagnostic purpose
[2692]	2240	IF (flag_inhib_tend .ne. 0) CALL init_cmp_seri
[524]	2241
[2469]	2242	! Diagnostiquer la tendance dynamique
	2243	!
	2244	IF (ancien_ok) THEN
[2499]	2245	!
[3435]	2246	d_u_dyn(:,:) = (u_seri(:,:)-u_ancien(:,:))/phys_tstep
	2247	d_v_dyn(:,:) = (v_seri(:,:)-v_ancien(:,:))/phys_tstep
	2248	d_t_dyn(:,:) = (t_seri(:,:)-t_ancien(:,:))/phys_tstep
	2249	d_q_dyn(:,:) = (q_seri(:,:)-q_ancien(:,:))/phys_tstep
	2250	d_ql_dyn(:,:) = (ql_seri(:,:)-ql_ancien(:,:))/phys_tstep
	2251	d_qs_dyn(:,:) = (qs_seri(:,:)-qs_ancien(:,:))/phys_tstep
[2499]	2252	CALL water_int(klon,klev,q_seri,zmasse,zx_tmp_fi2d)
[3435]	2253	d_q_dyn2d(:)=(zx_tmp_fi2d(:)-prw_ancien(:))/phys_tstep
[2499]	2254	CALL water_int(klon,klev,ql_seri,zmasse,zx_tmp_fi2d)
[3435]	2255	d_ql_dyn2d(:)=(zx_tmp_fi2d(:)-prlw_ancien(:))/phys_tstep
[2499]	2256	CALL water_int(klon,klev,qs_seri,zmasse,zx_tmp_fi2d)
[3435]	2257	d_qs_dyn2d(:)=(zx_tmp_fi2d(:)-prsw_ancien(:))/phys_tstep
[2469]	2258	! !! RomP >>> td dyn traceur
[2499]	2259	IF (nqtot.GT.nqo) THEN ! jyg
[2469]	2260	DO iq = nqo+1, nqtot ! jyg
[3435]	2261	d_tr_dyn(:,:,iq-nqo)=(tr_seri(:,:,iq-nqo)-tr_ancien(:,:,iq-nqo))/phys_tstep ! jyg
[2469]	2262	ENDDO
	2263	ENDIF
	2264	! !! RomP <<<
	2265	ELSE
[2499]	2266	d_u_dyn(:,:) = 0.0
	2267	d_v_dyn(:,:) = 0.0
	2268	d_t_dyn(:,:) = 0.0
	2269	d_q_dyn(:,:) = 0.0
	2270	d_ql_dyn(:,:) = 0.0
	2271	d_qs_dyn(:,:) = 0.0
	2272	d_q_dyn2d(:) = 0.0
	2273	d_ql_dyn2d(:) = 0.0
	2274	d_qs_dyn2d(:) = 0.0
[2469]	2275	! !! RomP >>> td dyn traceur
[2499]	2276	IF (nqtot.GT.nqo) THEN ! jyg
	2277	DO iq = nqo+1, nqtot ! jyg
	2278	d_tr_dyn(:,:,iq-nqo)= 0.0 ! jyg
[2469]	2279	ENDDO
	2280	ENDIF
	2281	! !! RomP <<<
	2282	ancien_ok = .TRUE.
	2283	ENDIF
	2284	!
	2285	! Ajouter le geopotentiel du sol:
	2286	!
	2287	DO k = 1, klev
	2288	DO i = 1, klon
	2289	zphi(i,k) = pphi(i,k) + pphis(i)
	2290	ENDDO
	2291	ENDDO
	2292	!
	2293	! Verifier les temperatures
	2294	!
	2295	!IM BEG
	2296	IF (check) THEN
	2297	amn=MIN(ftsol(1,is_ter),1000.)
	2298	amx=MAX(ftsol(1,is_ter),-1000.)
	2299	DO i=2, klon
	2300	amn=MIN(ftsol(i,is_ter),amn)
	2301	amx=MAX(ftsol(i,is_ter),amx)
	2302	ENDDO
	2303	!
	2304	PRINT*,' debut avant hgardfou min max ftsol',itap,amn,amx
	2305	ENDIF !(check) THEN
	2306	!IM END
	2307	!
	2308	CALL hgardfou(t_seri,ftsol,'debutphy',abortphy)
	2309	IF (abortphy==1) Print*,'ERROR ABORT hgardfou debutphy'
[2235]	2310
[2469]	2311	!
	2312	!IM BEG
	2313	IF (check) THEN
	2314	amn=MIN(ftsol(1,is_ter),1000.)
	2315	amx=MAX(ftsol(1,is_ter),-1000.)
	2316	DO i=2, klon
	2317	amn=MIN(ftsol(i,is_ter),amn)
	2318	amx=MAX(ftsol(i,is_ter),amx)
	2319	ENDDO
	2320	!
	2321	PRINT*,' debut apres hgardfou min max ftsol',itap,amn,amx
	2322	ENDIF !(check) THEN
	2323	!IM END
	2324	!
	2325	! Mettre en action les conditions aux limites (albedo, sst, etc.).
	2326	! Prescrire l'ozone et calculer l'albedo sur l'ocean.
	2327	!
[2661]	2328	! Update ozone if day change
	2329	IF (MOD(itap-1,lmt_pas) == 0) THEN
[2774]	2330	IF (read_climoz <= 0) THEN
	2331	! Once per day, update ozone from Royer:
	2332	IF (solarlong0<-999.) then
	2333	! Generic case with evolvoing season
	2334	zzz=real(days_elapsed+1)
	2335	ELSE IF (abs(solarlong0-1000.)<1.e-4) then
	2336	! Particular case with annual mean insolation
	2337	zzz=real(90) ! could be revisited
	2338	IF (read_climoz/=-1) THEN
	2339	abort_message ='read_climoz=-1 is recommended when ' &
	2340	// 'solarlong0=1000.'
	2341	CALL abort_physic (modname,abort_message,1)
	2342	ENDIF
	2343	ELSE
	2344	! Case where the season is imposed with solarlong0
	2345	zzz=real(90) ! could be revisited
	2346	ENDIF
[2661]	2347
[2774]	2348	wo(:,:,1)=ozonecm(latitude_deg, paprs,read_climoz,rjour=zzz)
[3666]	2349	#ifdef REPROBUS
	2350	ptrop=dyn_tropopause(t_seri, ztsol, paprs, pplay, rot)/100.
	2351	DO i = 1, klon
	2352	Z1=t_seri(i,itroprep(i)+1)
	2353	Z2=t_seri(i,itroprep(i))
	2354	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2355	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2356	ttrop(i)= fac*alog(ptrop(i))+B
	2357	!
	2358	Z1= 1.e-3 * ( pphi(i,itroprep(i)+1)+pphis(i) ) / gravit
	2359	Z2= 1.e-3 * ( pphi(i,itroprep(i)) +pphis(i) ) / gravit
	2360	fac=(Z1-Z2)/alog(pplay(i,itroprep(i)+1)/pplay(i,itroprep(i)))
	2361	B=Z2-fac*alog(pplay(i,itroprep(i)))
	2362	ztrop(i)=fac*alog(ptrop(i))+B
	2363	ENDDO
	2364	#endif
[2774]	2365	ELSE
[2820]	2366	!--- ro3i = elapsed days number since current year 1st january, 0h
	2367	ro3i=days_elapsed+jh_cur-jh_1jan
	2368	!--- scaling for old style files (360 records)
	2369	IF(SIZE(time_climoz)==360.AND..NOT.ok_daily_climoz) ro3i=ro3i*360./year_len
[2788]	2370	IF(adjust_tropopause) THEN
[2820]	2371	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
[3086]	2372	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2373	time_climoz , longitude_deg, latitude_deg, &
[2968]	2374	dyn_tropopause(t_seri, ztsol, paprs, pplay, rot))
[2774]	2375	ELSE
[3086]	2376	CALL regr_pr_time_av(ncid_climoz, vars_climoz(1:read_climoz), &
	2377	ro3i, 'C', press_cen_climoz, pplay, wo, paprs(:,1), &
	2378	time_climoz )
[3461]	2379	ENDIF
[2774]	2380	! Convert from mole fraction of ozone to column density of ozone in a
	2381	! cell, in kDU:
	2382	FORALL (l = 1: read_climoz) wo(:, :, l) = wo(:, :, l) * rmo3 / rmd &
	2383	* zmasse / dobson_u / 1e3
[2788]	2384	! (By regridding ozone values for LMDZ only once a day, we
[2774]	2385	! have already neglected the variation of pressure in one
	2386	! day. So do not recompute "wo" at each time step even if
	2387	! "zmasse" changes a little.)
	2388	ENDIF
[2469]	2389	ENDIF
	2390	!
	2391	! Re-evaporer l'eau liquide nuageuse
	2392	!
[2705]	2393	CALL reevap (klon,klev,iflag_ice_thermo,t_seri,q_seri,ql_seri,qs_seri, &
	2394	& d_t_eva,d_q_eva,d_ql_eva,d_qi_eva)
[1849]	2395
[2705]	2396	CALL add_phys_tend &
	2397	(du0,dv0,d_t_eva,d_q_eva,d_ql_eva,d_qi_eva,paprs,&
[2812]	2398	'eva',abortphy,flag_inhib_tend,itap,0)
[3461]	2399	CALL prt_enerbil('eva',itap)
[2086]	2400
[2469]	2401	!=========================================================================
	2402	! Calculs de l'orbite.
	2403	! Necessaires pour le rayonnement et la surface (calcul de l'albedo).
	2404	! doit donc etre plac\'e avant radlwsw et pbl_surface
[883]	2405
[2469]	2406	! !! jyg 17 Sep 2010 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2692]	2407	CALL ymds2ju(year_cur, mth_eq, day_eq,0., jD_eq)
[2469]	2408	day_since_equinox = (jD_cur + jH_cur) - jD_eq
	2409	!
	2410	! choix entre calcul de la longitude solaire vraie ou valeur fixee a
	2411	! solarlong0
[2692]	2412	IF (solarlong0<-999.) THEN
	2413	IF (new_orbit) THEN
[2469]	2414	! calcul selon la routine utilisee pour les planetes
[2692]	2415	CALL solarlong(day_since_equinox, zlongi, dist)
	2416	ELSE
[2469]	2417	! calcul selon la routine utilisee pour l'AR4
	2418	CALL orbite(REAL(days_elapsed+1),zlongi,dist)
[2692]	2419	ENDIF
	2420	ELSE
[2469]	2421	zlongi=solarlong0 ! longitude solaire vraie
	2422	dist=1. ! distance au soleil / moyenne
[2692]	2423	ENDIF
[1529]	2424
[2692]	2425	IF (prt_level.ge.1) write(lunout,*)'Longitude solaire ',zlongi,solarlong0,dist
[524]	2426
[2692]	2427
[2469]	2428	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2429	! Calcul de l'ensoleillement :
	2430	! ============================
	2431	! Pour une solarlong0=1000., on calcule un ensoleillement moyen sur
	2432	! l'annee a partir d'une formule analytique.
	2433	! Cet ensoleillement est sym\'etrique autour de l'\'equateur et
	2434	! non nul aux poles.
[2692]	2435	IF (abs(solarlong0-1000.)<1.e-4) THEN
	2436	CALL zenang_an(iflag_cycle_diurne.GE.1,jH_cur, &
[2469]	2437	latitude_deg,longitude_deg,rmu0,fract)
[2979]	2438	swradcorr(:) = 1.0
	2439	JrNt(:) = 1.0
	2440	zrmu0(:) = rmu0(:)
[2469]	2441	ELSE
	2442	! recode par Olivier Boucher en sept 2015
	2443	SELECT CASE (iflag_cycle_diurne)
	2444	CASE(0)
	2445	! Sans cycle diurne
	2446	CALL angle(zlongi, latitude_deg, fract, rmu0)
	2447	swradcorr = 1.0
	2448	JrNt = 1.0
	2449	zrmu0 = rmu0
	2450	CASE(1)
	2451	! Avec cycle diurne sans application des poids
	2452	! bit comparable a l ancienne formulation cycle_diurne=true
	2453	! on integre entre gmtime et gmtime+radpas
[3435]	2454	zdtime=phys_tstep*REAL(radpas) ! pas de temps du rayonnement (s)
[2469]	2455	CALL zenang(zlongi,jH_cur,0.0,zdtime, &
	2456	latitude_deg,longitude_deg,rmu0,fract)
	2457	zrmu0 = rmu0
	2458	swradcorr = 1.0
	2459	! Calcul du flag jour-nuit
	2460	JrNt = 0.0
	2461	WHERE (fract.GT.0.0) JrNt = 1.0
	2462	CASE(2)
	2463	! Avec cycle diurne sans application des poids
	2464	! On integre entre gmtime-pdtphys et gmtime+pdtphys*(radpas-1)
	2465	! Comme cette routine est appele a tous les pas de temps de
	2466	! la physique meme si le rayonnement n'est pas appele je
	2467	! remonte en arriere les radpas-1 pas de temps
	2468	! suivant. Petite ruse avec MOD pour prendre en compte le
	2469	! premier pas de temps de la physique pendant lequel
	2470	! itaprad=0
[3435]	2471	zdtime1=phys_tstep*REAL(-MOD(itaprad,radpas)-1)
	2472	zdtime2=phys_tstep*REAL(radpas-MOD(itaprad,radpas)-1)
[2469]	2473	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2474	latitude_deg,longitude_deg,rmu0,fract)
	2475	!
	2476	! Calcul des poids
	2477	!
[3435]	2478	zdtime1=-phys_tstep !--on corrige le rayonnement pour representer le
[2469]	2479	zdtime2=0.0 !--pas de temps de la physique qui se termine
	2480	CALL zenang(zlongi,jH_cur,zdtime1,zdtime2, &
	2481	latitude_deg,longitude_deg,zrmu0,zfract)
	2482	swradcorr = 0.0
	2483	WHERE (rmu0.GE.1.e-10 .OR. fract.GE.1.e-10) &
	2484	swradcorr=zfract/fract*zrmu0/rmu0
	2485	! Calcul du flag jour-nuit
	2486	JrNt = 0.0
	2487	WHERE (zfract.GT.0.0) JrNt = 1.0
	2488	END SELECT
	2489	ENDIF
[3110]	2490	sza_o = ACOS (rmu0) *180./pi
[782]	2491
[2692]	2492	IF (mydebug) THEN
	2493	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2494	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2495	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2496	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2497	ENDIF
[883]	2498
[2469]	2499	!cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
	2500	! Appel au pbl_surface : Planetary Boudary Layer et Surface
	2501	! Cela implique tous les interactions des sous-surfaces et la
	2502	! partie diffusion turbulent du couche limit.
	2503	!
	2504	! Certains varibales de sorties de pbl_surface sont utiliser que pour
	2505	! ecriture des fihiers hist_XXXX.nc, ces sont :
	2506	! qsol, zq2m, s_pblh, s_lcl,
	2507	! s_capCL, s_oliqCL, s_cteiCL,s_pblT,
	2508	! s_therm, s_trmb1, s_trmb2, s_trmb3,
	2509	! zu10m, zv10m, fder,
	2510	! zxqsurf, rh2m, zxfluxu, zxfluxv,
	2511	! frugs, agesno, fsollw, fsolsw,
	2512	! d_ts, fevap, fluxlat, t2m,
	2513	! wfbils, wfbilo, fluxt, fluxu, fluxv,
	2514	!
	2515	! Certains ne sont pas utiliser du tout :
	2516	! dsens, devap, zxsnow, zxfluxt, zxfluxq, q2m, fluxq
	2517	!
[1724]	2518
[2469]	2519	! Calcul de l'humidite de saturation au niveau du sol
[1724]	2520
	2521
[996]	2522
[2692]	2523	IF (iflag_pbl/=0) THEN
[2240]	2524
[2469]	2525	!jyg+nrlmd<
[2852]	2526	!!jyg IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,2) .eq. 1) THEN
	2527	IF (prt_level .ge. 2 .and. mod(iflag_pbl_split,10) .ge. 1) THEN
[3179]	2528	print *,'debut du splitting de la PBL, wake_s = ', wake_s(:)
	2529	print *,'debut du splitting de la PBL, wake_deltat = ', wake_deltat(:,1)
	2530	print *,'debut du splitting de la PBL, wake_deltaq = ', wake_deltaq(:,1)
[2469]	2531	ENDIF
	2532	! !!
	2533	!>jyg+nrlmd
	2534	!
	2535	!-------gustiness calculation-------!
[3435]	2536	!ym : Warning gustiness non inialized for iflag_gusts=2 & iflag_gusts=3
	2537	gustiness=0 !ym missing init
	2538
[2469]	2539	IF (iflag_gusts==0) THEN
	2540	gustiness(1:klon)=0
	2541	ELSE IF (iflag_gusts==1) THEN
[3111]	2542	gustiness(1:klon)=f_gust_blale_bl(1:klon)+f_gust_wkale_wake(1:klon)
	2543	ELSE IF (iflag_gusts==2) THEN
	2544	gustiness(1:klon)=f_gust_blale_bl_stat(1:klon)+f_gust_wkale_wake(1:klon)
[2469]	2545	! ELSE IF (iflag_gusts==2) THEN
	2546	! do i = 1, klon
	2547	! gustiness(i)=f_gust_blale_bl(i)+sigma_wk(i)f_gust_wk&
	2548	! *ale_wake(i) !! need to make sigma_wk accessible here
	2549	! enddo
	2550	! ELSE IF (iflag_gusts==3) THEN
	2551	! do i = 1, klon
	2552	! gustiness(i)=f_gust_blalp_bl(i)+f_gust_wkalp_wake(i)
	2553	! enddo
	2554	ENDIF
[2278]	2555
[2469]	2556	CALL pbl_surface( &
[3435]	2557	phys_tstep, date0, itap, days_elapsed+1, &
[2469]	2558	debut, lafin, &
	2559	longitude_deg, latitude_deg, rugoro, zrmu0, &
	2560	zsig, sollwdown, pphi, cldt, &
[3756]	2561	rain_fall, snow_fall, solsw, solswfdiff, sollw, &
[2469]	2562	gustiness, &
	2563	t_seri, q_seri, u_seri, v_seri, &
	2564	!nrlmd+jyg<
	2565	wake_deltat, wake_deltaq, wake_cstar, wake_s, &
	2566	!>nrlmd+jyg
	2567	pplay, paprs, pctsrf, &
	2568	ftsol,SFRWL,falb_dir,falb_dif,ustar,u10m,v10m,wstar, &
	2569	!albedo SB <<<
	2570	cdragh, cdragm, u1, v1, &
	2571	!albedo SB >>>
	2572	! albsol1, albsol2, sens, evap, &
	2573	albsol_dir, albsol_dif, sens, evap, &
	2574	!albedo SB <<<
	2575	albsol3_lic,runoff, snowhgt, qsnow, to_ice, sissnow, &
	2576	zxtsol, zxfluxlat, zt2m, qsat2m, &
	2577	d_t_vdf, d_q_vdf, d_u_vdf, d_v_vdf, d_t_diss, &
	2578	!nrlmd<
	2579	!jyg<
	2580	d_t_vdf_w, d_q_vdf_w, &
	2581	d_t_vdf_x, d_q_vdf_x, &
	2582	sens_x, zxfluxlat_x, sens_w, zxfluxlat_w, &
	2583	!>jyg
	2584	delta_tsurf,wake_dens, &
	2585	cdragh_x,cdragh_w,cdragm_x,cdragm_w, &
	2586	kh,kh_x,kh_w, &
	2587	!>nrlmd
	2588	coefh(1:klon,1:klev,1:nbsrf+1), coefm(1:klon,1:klev,1:nbsrf+1), &
	2589	slab_wfbils, &
	2590	qsol, zq2m, s_pblh, s_lcl, &
	2591	!jyg<
	2592	s_pblh_x, s_lcl_x, s_pblh_w, s_lcl_w, &
	2593	!>jyg
	2594	s_capCL, s_oliqCL, s_cteiCL,s_pblT, &
	2595	s_therm, s_trmb1, s_trmb2, s_trmb3, &
	2596	zustar, zu10m, zv10m, fder, &
	2597	zxqsurf, rh2m, zxfluxu, zxfluxv, &
	2598	z0m, z0h, agesno, fsollw, fsolsw, &
	2599	d_ts, fevap, fluxlat, t2m, &
[2670]	2600	wfbils, wfbilo, wfevap, wfrain, wfsnow, &
	2601	fluxt, fluxu, fluxv, &
[2469]	2602	dsens, devap, zxsnow, &
	2603	zxfluxt, zxfluxq, q2m, fluxq, pbl_tke, &
	2604	!nrlmd+jyg<
[2952]	2605	wake_delta_pbl_TKE, &
[2469]	2606	!>nrlmd+jyg
[2952]	2607	treedrg )
	2608	!FC
[2469]	2609	!
	2610	! Add turbulent diffusion tendency to the wake difference variables
[2852]	2611	!!jyg IF (mod(iflag_pbl_split,2) .NE. 0) THEN
	2612	IF (mod(iflag_pbl_split,10) .NE. 0) THEN
[2635]	2613	!jyg<
	2614	d_deltat_vdf(:,:) = d_t_vdf_w(:,:)-d_t_vdf_x(:,:)
	2615	d_deltaq_vdf(:,:) = d_q_vdf_w(:,:)-d_q_vdf_x(:,:)
	2616	CALL add_wake_tend &
[3208]	2617	(d_deltat_vdf, d_deltaq_vdf, dsig0, ddens0, ddens0, wkoccur1, 'vdf', abortphy)
[2635]	2618	ELSE
	2619	d_deltat_vdf(:,:) = 0.
	2620	d_deltaq_vdf(:,:) = 0.
	2621	!>jyg
[2469]	2622	ENDIF
[1624]	2623
[3489]	2624	!add limitation for t,q at and wind at 10m
	2625	if ( iflag_bug_t2m_ipslcm61 == 0 ) THEN
	2626	CALL borne_var_surf( klon,klev,nbsrf, &
	2627	iflag_bug_t2m_stab_ipslcm61, &
	2628	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1), &
	2629	ftsol,zxqsurf,pctsrf,paprs, &
	2630	t2m, q2m, u10m, v10m, &
	2631	zt2m_cor, zq2m_cor, zu10m_cor, zv10m_cor, &
	2632	zrh2m_cor, zqsat2m_cor)
	2633	ELSE
	2634	zt2m_cor(:)=zt2m(:)
	2635	zq2m_cor(:)=zq2m(:)
	2636	zu10m_cor(:)=zu10m(:)
	2637	zv10m_cor(:)=zv10m(:)
[3575]	2638	zqsat2m_cor=999.999
[3489]	2639	ENDIF
[766]	2640
[2469]	2641	!---------------------------------------------------------------------
	2642	! ajout des tendances de la diffusion turbulente
	2643	IF (klon_glo==1) THEN
	2644	CALL add_pbl_tend &
	2645	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2799]	2646	'vdf',abortphy,flag_inhib_tend,itap)
[2469]	2647	ELSE
	2648	CALL add_phys_tend &
	2649	(d_u_vdf,d_v_vdf,d_t_vdf+d_t_diss,d_q_vdf,dql0,dqi0,paprs,&
[2812]	2650	'vdf',abortphy,flag_inhib_tend,itap,0)
[2469]	2651	ENDIF
[3461]	2652	CALL prt_enerbil('vdf',itap)
[2469]	2653	!--------------------------------------------------------------------
[766]	2654
[2692]	2655	IF (mydebug) THEN
	2656	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	2657	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	2658	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	2659	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	2660	ENDIF
[2227]	2661
[2469]	2662	!albedo SB >>>
	2663	albsol1=0.
	2664	albsol2=0.
	2665	falb1=0.
	2666	falb2=0.
[2692]	2667	SELECT CASE(nsw)
	2668	CASE(2)
[2469]	2669	albsol1=albsol_dir(:,1)
	2670	albsol2=albsol_dir(:,2)
	2671	falb1=falb_dir(:,1,:)
	2672	falb2=falb_dir(:,2,:)
[2692]	2673	CASE(4)
[2469]	2674	albsol1=albsol_dir(:,1)
	2675	albsol2=albsol_dir(:,2)SFRWL(2)+albsol_dir(:,3)SFRWL(3) &
	2676	+albsol_dir(:,4)*SFRWL(4)
	2677	albsol2=albsol2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
	2678	falb1=falb_dir(:,1,:)
	2679	falb2=falb_dir(:,2,:)SFRWL(2)+falb_dir(:,3,:)SFRWL(3) &
	2680	+falb_dir(:,4,:)*SFRWL(4)
	2681	falb2=falb2/(SFRWL(2)+SFRWL(3)+SFRWL(4))
[2692]	2682	CASE(6)
[2469]	2683	albsol1=albsol_dir(:,1)SFRWL(1)+albsol_dir(:,2)SFRWL(2) &
	2684	+albsol_dir(:,3)*SFRWL(3)
	2685	albsol1=albsol1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2686	albsol2=albsol_dir(:,4)SFRWL(4)+albsol_dir(:,5)SFRWL(5) &
	2687	+albsol_dir(:,6)*SFRWL(6)
	2688	albsol2=albsol2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
	2689	falb1=falb_dir(:,1,:)SFRWL(1)+falb_dir(:,2,:)SFRWL(2) &
	2690	+falb_dir(:,3,:)*SFRWL(3)
	2691	falb1=falb1/(SFRWL(1)+SFRWL(2)+SFRWL(3))
	2692	falb2=falb_dir(:,4,:)SFRWL(4)+falb_dir(:,5,:)SFRWL(5) &
	2693	+falb_dir(:,6,:)*SFRWL(6)
	2694	falb2=falb2/(SFRWL(4)+SFRWL(5)+SFRWL(6))
[2692]	2695	END SELECt
[2469]	2696	!albedo SB <<<
[2227]	2697
[766]	2698
[2469]	2699	CALL evappot(klon,nbsrf,ftsol,pplay(:,1),cdragh, &
	2700	t_seri(:,1),q_seri(:,1),u_seri(:,1),v_seri(:,1),evap_pot)
[1724]	2701
[2469]	2702	ENDIF
	2703	! =================================================================== c
	2704	! Calcul de Qsat
[881]	2705
[2469]	2706	DO k = 1, klev
	2707	DO i = 1, klon
	2708	zx_t = t_seri(i,k)
	2709	IF (thermcep) THEN
	2710	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	2711	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	2712	zx_qs = MIN(0.5,zx_qs)
	2713	zcor = 1./(1.-retv*zx_qs)
	2714	zx_qs = zx_qs*zcor
	2715	ELSE
	2716	!! IF (zx_t.LT.t_coup) THEN !jyg
	2717	IF (zx_t.LT.rtt) THEN !jyg
	2718	zx_qs = qsats(zx_t)/pplay(i,k)
	2719	ELSE
	2720	zx_qs = qsatl(zx_t)/pplay(i,k)
	2721	ENDIF
	2722	ENDIF
	2723	zqsat(i,k)=zx_qs
	2724	ENDDO
	2725	ENDDO
[959]	2726
[2692]	2727	IF (prt_level.ge.1) THEN
[2469]	2728	write(lunout,*) 'L qsat (g/kg) avant clouds_gno'
	2729	write(lunout,'(i4,f15.4)') (k,1000.*zqsat(igout,k),k=1,klev)
[2692]	2730	ENDIF
[2469]	2731	!
	2732	! Appeler la convection (au choix)
	2733	!
	2734	DO k = 1, klev
	2735	DO i = 1, klon
	2736	conv_q(i,k) = d_q_dyn(i,k) &
[3435]	2737	+ d_q_vdf(i,k)/phys_tstep
[2469]	2738	conv_t(i,k) = d_t_dyn(i,k) &
[3435]	2739	+ d_t_vdf(i,k)/phys_tstep
[2469]	2740	ENDDO
	2741	ENDDO
	2742	IF (check) THEN
	2743	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	2744	WRITE(lunout,*) "avantcon=", za
	2745	ENDIF
	2746	zx_ajustq = .FALSE.
	2747	IF (iflag_con.EQ.2) zx_ajustq=.TRUE.
	2748	IF (zx_ajustq) THEN
	2749	DO i = 1, klon
	2750	z_avant(i) = 0.0
	2751	ENDDO
	2752	DO k = 1, klev
	2753	DO i = 1, klon
	2754	z_avant(i) = z_avant(i) + (q_seri(i,k)+ql_seri(i,k)) &
	2755	*(paprs(i,k)-paprs(i,k+1))/RG
	2756	ENDDO
	2757	ENDDO
	2758	ENDIF
[959]	2759
[2469]	2760	! Calcule de vitesse verticale a partir de flux de masse verticale
	2761	DO k = 1, klev
	2762	DO i = 1, klon
	2763	omega(i,k) = RG*flxmass_w(i,k) / cell_area(i)
[2692]	2764	ENDDO
	2765	ENDDO
	2766
	2767	IF (prt_level.ge.1) write(lunout,*) 'omega(igout, :) = ', &
[2469]	2768	omega(igout, :)
[2707]	2769	!
	2770	! Appel de la convection tous les "cvpas"
	2771	!
[3150]	2772	!!jyg IF (MOD(itapcv,cvpas).EQ.0) THEN
[3151]	2773	!! print *,' physiq : itapcv, cvpas, itap-1, cvpas_0 ', &
	2774	!! itapcv, cvpas, itap-1, cvpas_0
[3150]	2775	IF (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itap-1,cvpas_0).EQ.0) THEN
[2707]	2776
[3134]	2777	!
	2778	! Mettre a zero des variables de sortie (pour securite)
	2779	!
	2780	pmflxr(:,:) = 0.
	2781	pmflxs(:,:) = 0.
	2782	wdtrainA(:,:) = 0.
[3496]	2783	wdtrainS(:,:) = 0.
[3134]	2784	wdtrainM(:,:) = 0.
	2785	upwd(:,:) = 0.
	2786	dnwd(:,:) = 0.
	2787	ep(:,:) = 0.
	2788	da(:,:)=0.
	2789	mp(:,:)=0.
	2790	wght_cvfd(:,:)=0.
	2791	phi(:,:,:)=0.
	2792	phi2(:,:,:)=0.
	2793	epmlmMm(:,:,:)=0.
	2794	eplaMm(:,:)=0.
	2795	d1a(:,:)=0.
	2796	dam(:,:)=0.
	2797	elij(:,:,:)=0.
	2798	ev(:,:)=0.
[3496]	2799	qtaa(:,:)=0.
[3134]	2800	clw(:,:)=0.
	2801	sij(:,:,:)=0.
	2802	!
[2469]	2803	IF (iflag_con.EQ.1) THEN
	2804	abort_message ='reactiver le call conlmd dans physiq.F'
	2805	CALL abort_physic (modname,abort_message,1)
[3435]	2806	! CALL conlmd (phys_tstep, paprs, pplay, t_seri, q_seri, conv_q,
[2469]	2807	! . d_t_con, d_q_con,
	2808	! . rain_con, snow_con, ibas_con, itop_con)
	2809	ELSE IF (iflag_con.EQ.2) THEN
[3435]	2810	CALL conflx(phys_tstep, paprs, pplay, t_seri, q_seri, &
[2469]	2811	conv_t, conv_q, -evap, omega, &
	2812	d_t_con, d_q_con, rain_con, snow_con, &
	2813	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	2814	kcbot, kctop, kdtop, pmflxr, pmflxs)
	2815	d_u_con = 0.
	2816	d_v_con = 0.
[879]	2817
[2469]	2818	WHERE (rain_con < 0.) rain_con = 0.
	2819	WHERE (snow_con < 0.) snow_con = 0.
	2820	DO i = 1, klon
	2821	ibas_con(i) = klev+1 - kcbot(i)
	2822	itop_con(i) = klev+1 - kctop(i)
	2823	ENDDO
	2824	ELSE IF (iflag_con.GE.3) THEN
	2825	! nb of tracers for the KE convection:
	2826	! MAF la partie traceurs est faite dans phytrac
	2827	! on met ntra=1 pour limiter les appels mais on peut
	2828	! supprimer les calculs / ftra.
	2829	ntra = 1
	2830
	2831	!=======================================================================
	2832	!ajout pour la parametrisation des poches froides: calcul de
[2635]	2833	!t_w et t_x: si pas de poches froides, t_w=t_x=t_seri
[2692]	2834	IF (iflag_wake>=1) THEN
	2835	DO k=1,klev
	2836	DO i=1,klon
	2837	t_w(i,k) = t_seri(i,k) + (1-wake_s(i))*wake_deltat(i,k)
	2838	q_w(i,k) = q_seri(i,k) + (1-wake_s(i))*wake_deltaq(i,k)
	2839	t_x(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	2840	q_x(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
	2841	ENDDO
	2842	ENDDO
	2843	ELSE
	2844	t_w(:,:) = t_seri(:,:)
[2635]	2845	q_w(:,:) = q_seri(:,:)
	2846	t_x(:,:) = t_seri(:,:)
	2847	q_x(:,:) = q_seri(:,:)
[2692]	2848	ENDIF
[2469]	2849	!
	2850	!jyg<
	2851	! Perform dry adiabatic adjustment on wake profile
	2852	! The corresponding tendencies are added to the convective tendencies
	2853	! after the call to the convective scheme.
	2854	IF (iflag_wake>=1) then
[2882]	2855	IF (iflag_adjwk >= 1) THEN
[2469]	2856	limbas(:) = 1
[2635]	2857	CALL ajsec(paprs, pplay, t_w, q_w, limbas, &
[2309]	2858	d_t_adjwk, d_q_adjwk)
[2638]	2859	!
	2860	DO k=1,klev
	2861	DO i=1,klon
	2862	IF (wake_s(i) .GT. 1.e-3) THEN
	2863	t_w(i,k) = t_w(i,k) + d_t_adjwk(i,k)
	2864	q_w(i,k) = q_w(i,k) + d_q_adjwk(i,k)
	2865	d_deltat_ajs_cv(i,k) = d_t_adjwk(i,k)
	2866	d_deltaq_ajs_cv(i,k) = d_q_adjwk(i,k)
	2867	ELSE
	2868	d_deltat_ajs_cv(i,k) = 0.
	2869	d_deltaq_ajs_cv(i,k) = 0.
	2870	ENDIF
	2871	ENDDO
[2469]	2872	ENDDO
[2882]	2873	IF (iflag_adjwk == 2) THEN
	2874	CALL add_wake_tend &
[3208]	2875	(d_deltat_ajs_cv, d_deltaq_ajs_cv, dsig0, ddens0, ddens0, wkoccur1, 'ajs_cv', abortphy)
[2882]	2876	ENDIF ! (iflag_adjwk == 2)
	2877	ENDIF ! (iflag_adjwk >= 1)
[2469]	2878	ENDIF ! (iflag_wake>=1)
	2879	!>jyg
	2880	!
[2638]	2881
	2882	!! print *,'physiq. q_w(1,k), q_x(1,k) ', &
	2883	!! (k, q_w(1,k), q_x(1,k),k=1,25)
	2884
[2513]	2885	!jyg<
[3435]	2886	CALL alpale( debut, itap, phys_tstep, paprs, omega, t_seri, &
[2513]	2887	alp_offset, it_wape_prescr, wape_prescr, fip_prescr, &
	2888	ale_bl_prescr, alp_bl_prescr, &
	2889	wake_pe, wake_fip, &
	2890	Ale_bl, Ale_bl_trig, Alp_bl, &
[2554]	2891	Ale, Alp , Ale_wake, Alp_wake)
[2513]	2892	!>jyg
	2893	!
[2469]	2894	! sb, oct02:
	2895	! Schema de convection modularise et vectorise:
	2896	! (driver commun aux versions 3 et 4)
	2897	!
	2898	IF (ok_cvl) THEN ! new driver for convectL
	2899	!
	2900	!jyg<
	2901	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	2902	! Calculate the upmost level of deep convection loops: k_upper_cv
	2903	! (near 22 km)
	2904	k_upper_cv = klev
[3199]	2905	!izero = klon/2+1/klon
	2906	!DO k = klev,1,-1
	2907	! IF (pphi(izero,k) > 22.e4) k_upper_cv = k
	2908	!ENDDO
	2909	! FH : nouveau calcul base sur un profil global sans quoi
	2910	! le modele etait sensible au decoupage de domaines
[2469]	2911	DO k = klev,1,-1
[3199]	2912	IF (-7*log(presnivs(k)/presnivs(1)) > 25.) k_upper_cv = k
[2469]	2913	ENDDO
	2914	IF (prt_level .ge. 5) THEN
	2915	Print *, 'upmost level of deep convection loops: k_upper_cv = ', &
	2916	k_upper_cv
	2917	ENDIF
	2918	!
	2919	!>jyg
	2920	IF (type_trac == 'repr') THEN
	2921	nbtr_tmp=ntra
	2922	ELSE
	2923	nbtr_tmp=nbtr
[2692]	2924	ENDIF
[2469]	2925	!jyg iflag_con est dans clesphys
	2926	!c CALL concvl (iflag_con,iflag_clos,
	2927	CALL concvl (iflag_clos, &
[3435]	2928	phys_tstep, paprs, pplay, k_upper_cv, t_x,q_x, &
[2635]	2929	t_w,q_w,wake_s, &
[2469]	2930	u_seri,v_seri,tr_seri,nbtr_tmp, &
	2931	ALE,ALP, &
	2932	sig1,w01, &
	2933	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	2934	rain_con, snow_con, ibas_con, itop_con, sigd, &
[2824]	2935	ema_cbmf,plcl,plfc,wbeff,convoccur,upwd,dnwd,dnwd0, &
[3496]	2936	Ma,mipsh,Vprecip,cape,cin,tvp,Tconv,iflagctrl, &
[2469]	2937	pbase,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr,qcondc,wd, &
	2938	! RomP >>>
	2939	!! . pmflxr,pmflxs,da,phi,mp,
	2940	!! . ftd,fqd,lalim_conv,wght_th)
[3496]	2941	pmflxr,pmflxs,da,phi,mp,phi2,d1a,dam,sij,qtaa,clw,elij, &
[2469]	2942	ftd,fqd,lalim_conv,wght_th, &
	2943	ev, ep,epmlmMm,eplaMm, &
[3496]	2944	wdtrainA, wdtrainS, wdtrainM,wght_cvfd,qtc_cv,sigt_cv, &
[2481]	2945	tau_cld_cv,coefw_cld_cv,epmax_diag)
[2630]	2946
[2469]	2947	! RomP <<<
[619]	2948
[2469]	2949	!IM begin
	2950	! print*,'physiq: cin pbase dnwd0 ftd fqd ',cin(1),pbase(1),
	2951	! .dnwd0(1,1),ftd(1,1),fqd(1,1)
	2952	!IM end
	2953	!IM cf. FH
	2954	clwcon0=qcondc
	2955	pmfu(:,:)=upwd(:,:)+dnwd(:,:)
[3150]	2956	!
	2957	!jyg<
	2958	! If convective tendencies are too large, then call convection
	2959	! every time step
	2960	cvpas = cvpas_0
	2961	DO k=1,k_upper_cv
	2962	DO i=1,klon
[3161]	2963	IF (d_t_con(i,k) > 6.721 .AND. d_t_con(i,k) < 6.722 .AND.&
	2964	d_q_con(i,k) > -.0002171 .AND. d_q_con(i,k) < -.0002170) THEN
	2965	dtcon_multistep_max = 3.
	2966	dqcon_multistep_max = 0.02
	2967	ENDIF
	2968	ENDDO
	2969	ENDDO
	2970	!
	2971	DO k=1,k_upper_cv
	2972	DO i=1,klon
[3150]	2973	!! IF (abs(d_t_con(i,k)) > 0.24 .OR. &
	2974	!! abs(d_q_con(i,k)) > 2.e-2) THEN
	2975	IF (abs(d_t_con(i,k)) > dtcon_multistep_max .OR. &
	2976	abs(d_q_con(i,k)) > dqcon_multistep_max) THEN
	2977	cvpas = 1
	2978	!! print *,'physiq1, i,k,d_t_con(i,k),d_q_con(i,k) ', &
	2979	!! i,k,d_t_con(i,k),d_q_con(i,k)
	2980	ENDIF
	2981	ENDDO
	2982	ENDDO
[3153]	2983	!!! Ligne a ne surtout pas remettre sans avoir murement reflechi (jyg)
	2984	!!! call bcast(cvpas)
	2985	!!! ------------------------------------------------------------
[3150]	2986	!>jyg
	2987	!
[2692]	2988	DO i = 1, klon
[3148]	2989	IF (iflagctrl(i).le.1) itau_con(i)=itau_con(i)+cvpas
[2692]	2990	ENDDO
[2469]	2991	!
	2992	!jyg<
	2993	! Add the tendency due to the dry adjustment of the wake profile
	2994	IF (iflag_wake>=1) THEN
[2882]	2995	IF (iflag_adjwk == 2) THEN
	2996	DO k=1,klev
	2997	DO i=1,klon
[3435]	2998	ftd(i,k) = ftd(i,k) + wake_s(i)*d_t_adjwk(i,k)/phys_tstep
	2999	fqd(i,k) = fqd(i,k) + wake_s(i)*d_q_adjwk(i,k)/phys_tstep
[2882]	3000	d_t_con(i,k) = d_t_con(i,k) + wake_s(i)*d_t_adjwk(i,k)
	3001	d_q_con(i,k) = d_q_con(i,k) + wake_s(i)*d_q_adjwk(i,k)
	3002	ENDDO
	3003	ENDDO
	3004	ENDIF ! (iflag_adjwk = 2)
	3005	ENDIF ! (iflag_wake>=1)
[2469]	3006	!>jyg
	3007	!
	3008	ELSE ! ok_cvl
[1412]	3009
[2469]	3010	! MAF conema3 ne contient pas les traceurs
[3435]	3011	CALL conema3 (phys_tstep, &
[2469]	3012	paprs,pplay,t_seri,q_seri, &
	3013	u_seri,v_seri,tr_seri,ntra, &
	3014	sig1,w01, &
	3015	d_t_con,d_q_con,d_u_con,d_v_con,d_tr, &
	3016	rain_con, snow_con, ibas_con, itop_con, &
	3017	upwd,dnwd,dnwd0,bas,top, &
	3018	Ma,cape,tvp,rflag, &
	3019	pbase &
	3020	,bbase,dtvpdt1,dtvpdq1,dplcldt,dplcldr &
	3021	,clwcon0)
[524]	3022
[2469]	3023	ENDIF ! ok_cvl
[524]	3024
[2469]	3025	!
	3026	! Correction precip
	3027	rain_con = rain_con * cvl_corr
	3028	snow_con = snow_con * cvl_corr
	3029	!
[766]	3030
[2469]	3031	IF (.NOT. ok_gust) THEN
	3032	do i = 1, klon
	3033	wd(i)=0.0
	3034	enddo
	3035	ENDIF
[524]	3036
[2469]	3037	! =================================================================== c
	3038	! Calcul des proprietes des nuages convectifs
	3039	!
[524]	3040
[2469]	3041	! calcul des proprietes des nuages convectifs
	3042	clwcon0(:,:)=fact_cldcon*clwcon0(:,:)
	3043	IF (iflag_cld_cv == 0) THEN
[2692]	3044	CALL clouds_gno &
[2469]	3045	(klon,klev,q_seri,zqsat,clwcon0,ptconv,ratqsc,rnebcon0)
	3046	ELSE
[2692]	3047	CALL clouds_bigauss &
[2469]	3048	(klon,klev,q_seri,zqsat,qtc_cv,sigt_cv,ptconv,ratqsc,rnebcon0)
	3049	ENDIF
[524]	3050
[2205]	3051
[2469]	3052	! =================================================================== c
[524]	3053
[2469]	3054	DO i = 1, klon
	3055	itop_con(i) = min(max(itop_con(i),1),klev)
	3056	ibas_con(i) = min(max(ibas_con(i),1),itop_con(i))
	3057	ENDDO
[1428]	3058
[2469]	3059	DO i = 1, klon
	3060	ema_pcb(i) = paprs(i,ibas_con(i))
	3061	ENDDO
	3062	DO i = 1, klon
	3063	! L'idicage de itop_con peut cacher un pb potentiel
	3064	! FH sous la dictee de JYG, CR
	3065	ema_pct(i) = paprs(i,itop_con(i)+1)
[879]	3066
[2692]	3067	IF (itop_con(i).gt.klev-3) THEN
	3068	IF (prt_level >= 9) THEN
[2469]	3069	write(lunout,*)'La convection monte trop haut '
	3070	write(lunout,*)'itop_con(,',i,',)=',itop_con(i)
[2692]	3071	ENDIF
	3072	ENDIF
[2469]	3073	ENDDO
	3074	ELSE IF (iflag_con.eq.0) THEN
	3075	write(lunout,*) 'On n appelle pas la convection'
	3076	clwcon0=0.
	3077	rnebcon0=0.
	3078	d_t_con=0.
	3079	d_q_con=0.
	3080	d_u_con=0.
	3081	d_v_con=0.
	3082	rain_con=0.
	3083	snow_con=0.
	3084	bas=1
	3085	top=1
	3086	ELSE
	3087	WRITE(lunout,*) "iflag_con non-prevu", iflag_con
[2692]	3088	CALL abort_physic("physiq", "", 1)
[2469]	3089	ENDIF
[524]	3090
[2469]	3091	! CALL homogene(paprs, q_seri, d_q_con, u_seri,v_seri,
	3092	! . d_u_con, d_v_con)
[524]	3093
[2730]	3094	!jyg Reinitialize proba_notrig and itapcv when convection has been called
	3095	proba_notrig(:) = 1.
[2707]	3096	itapcv = 0
[3150]	3097	ENDIF ! (MOD(itapcv,cvpas).EQ.0 .OR. MOD(itapcv,cvpas_0).EQ.0)
[2730]	3098	!
[2707]	3099	itapcv = itapcv+1
[3153]	3100	!
	3101	! Compter les steps ou cvpas=1
	3102	IF (cvpas == 1) THEN
	3103	Ncvpaseq1 = Ncvpaseq1+1
	3104	ENDIF
	3105	IF (mod(itap,1000) == 0) THEN
	3106	print *,' physiq, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
	3107	ENDIF
[2707]	3108
[2812]	3109	!!!jyg Appel diagnostique a add_phys_tend pour tester la conservation de
	3110	!!! l'energie dans les courants satures.
	3111	!! d_t_con_sat(:,:) = d_t_con(:,:) - ftd(:,:)*dtime
	3112	!! d_q_con_sat(:,:) = d_q_con(:,:) - fqd(:,:)*dtime
	3113	!! dql_sat(:,:) = (wdtrainA(:,:)+wdtrainM(:,:))*dtime/zmasse(:,:)
	3114	!! CALL add_phys_tend(d_u_con, d_v_con, d_t_con_sat, d_q_con_sat, dql_sat, &
	3115	!! dqi0, paprs, 'convection_sat', abortphy, flag_inhib_tend,&
	3116	!! itap, 1)
	3117	!! call prt_enerbil('convection_sat',itap)
	3118	!!
	3119	!!
[2469]	3120	CALL add_phys_tend(d_u_con, d_v_con, d_t_con, d_q_con, dql0, dqi0, paprs, &
[2812]	3121	'convection',abortphy,flag_inhib_tend,itap,0)
[3461]	3122	CALL prt_enerbil('convection',itap)
[2235]	3123
[2469]	3124	!-------------------------------------------------------------------------
[766]	3125
[2692]	3126	IF (mydebug) THEN
	3127	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3128	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3129	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3130	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3131	ENDIF
[766]	3132
[2469]	3133	IF (check) THEN
	3134	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3135	WRITE(lunout,*)"aprescon=", za
	3136	zx_t = 0.0
	3137	za = 0.0
	3138	DO i = 1, klon
	3139	za = za + cell_area(i)/REAL(klon)
	3140	zx_t = zx_t + (rain_con(i)+ &
	3141	snow_con(i))*cell_area(i)/REAL(klon)
	3142	ENDDO
[3435]	3143	zx_t = zx_t/za*phys_tstep
[2469]	3144	WRITE(lunout,*)"Precip=", zx_t
	3145	ENDIF
	3146	IF (zx_ajustq) THEN
	3147	DO i = 1, klon
	3148	z_apres(i) = 0.0
	3149	ENDDO
	3150	DO k = 1, klev
	3151	DO i = 1, klon
	3152	z_apres(i) = z_apres(i) + (q_seri(i,k)+ql_seri(i,k)) &
	3153	*(paprs(i,k)-paprs(i,k+1))/RG
	3154	ENDDO
	3155	ENDDO
	3156	DO i = 1, klon
[3435]	3157	z_factor(i) = (z_avant(i)-(rain_con(i)+snow_con(i))*phys_tstep) &
[2469]	3158	/z_apres(i)
	3159	ENDDO
	3160	DO k = 1, klev
	3161	DO i = 1, klon
	3162	IF (z_factor(i).GT.(1.0+1.0E-08) .OR. &
	3163	z_factor(i).LT.(1.0-1.0E-08)) THEN
	3164	q_seri(i,k) = q_seri(i,k) * z_factor(i)
	3165	ENDIF
	3166	ENDDO
	3167	ENDDO
	3168	ENDIF
	3169	zx_ajustq=.FALSE.
[879]	3170
[2469]	3171	!
	3172	!==========================================================================
	3173	!RR:Evolution de la poche froide: on ne fait pas de separation wake/env
	3174	!pour la couche limite diffuse pour l instant
	3175	!
	3176	!
	3177	! nrlmd le 22/03/2011---Si on met les poches hors des thermiques
	3178	! il faut rajouter cette tendance calcul\'ee hors des poches
	3179	! froides
	3180	!
[2692]	3181	IF (iflag_wake>=1) THEN
[2707]	3182	!
	3183	!
[2730]	3184	! Call wakes every "wkpas" step
	3185	!
	3186	IF (MOD(itapwk,wkpas).EQ.0) THEN
	3187	!
	3188	DO k=1,klev
[2469]	3189	DO i=1,klon
[2730]	3190	dt_dwn(i,k) = ftd(i,k)
	3191	dq_dwn(i,k) = fqd(i,k)
	3192	M_dwn(i,k) = dnwd0(i,k)
	3193	M_up(i,k) = upwd(i,k)
[3435]	3194	dt_a(i,k) = d_t_con(i,k)/phys_tstep - ftd(i,k)
	3195	dq_a(i,k) = d_q_con(i,k)/phys_tstep - fqd(i,k)
[2469]	3196	ENDDO
	3197	ENDDO
[2730]	3198
	3199	IF (iflag_wake==2) THEN
	3200	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3201	DO k = 1,klev
	3202	dt_dwn(:,k)= dt_dwn(:,k)+ &
[3435]	3203	ok_wk_lsp(:)*(d_t_eva(:,k)+d_t_lsc(:,k))/phys_tstep
[2730]	3204	dq_dwn(:,k)= dq_dwn(:,k)+ &
[3435]	3205	ok_wk_lsp(:)*(d_q_eva(:,k)+d_q_lsc(:,k))/phys_tstep
[2730]	3206	ENDDO
	3207	ELSEIF (iflag_wake==3) THEN
	3208	ok_wk_lsp(:)=max(sign(1.,wake_s(:)-wake_s_min_lsp),0.)
	3209	DO k = 1,klev
	3210	DO i=1,klon
	3211	IF (rneb(i,k)==0.) THEN
	3212	! On ne tient compte des tendances qu'en dehors des
	3213	! nuages (c'est-\`a-dire a priri dans une region ou
	3214	! l'eau se reevapore).
	3215	dt_dwn(i,k)= dt_dwn(i,k)+ &
[3435]	3216	ok_wk_lsp(i)*d_t_lsc(i,k)/phys_tstep
[2730]	3217	dq_dwn(i,k)= dq_dwn(i,k)+ &
[3435]	3218	ok_wk_lsp(i)*d_q_lsc(i,k)/phys_tstep
[2730]	3219	ENDIF
	3220	ENDDO
	3221	ENDDO
	3222	ENDIF
	3223
	3224	!
	3225	!calcul caracteristiques de la poche froide
[3435]	3226	CALL calWAKE (iflag_wake_tend, paprs, pplay, phys_tstep, &
[2730]	3227	t_seri, q_seri, omega, &
	3228	dt_dwn, dq_dwn, M_dwn, M_up, &
[3208]	3229	dt_a, dq_a, cv_gen, &
	3230	sigd, cin, &
	3231	wake_deltat, wake_deltaq, wake_s, awake_dens, wake_dens, &
[2730]	3232	wake_dth, wake_h, &
[3000]	3233	!! wake_pe, wake_fip, wake_gfl, &
	3234	wake_pe, wake_fip_0, wake_gfl, & !! jyg
[2730]	3235	d_t_wake, d_q_wake, &
	3236	wake_k, t_x, q_x, &
	3237	wake_omgbdth, wake_dp_omgb, &
	3238	wake_dtKE, wake_dqKE, &
	3239	wake_omg, wake_dp_deltomg, &
	3240	wake_spread, wake_Cstar, d_deltat_wk_gw, &
[3208]	3241	d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk)
[2730]	3242	!
	3243	!jyg Reinitialize itapwk when wakes have been called
	3244	itapwk = 0
	3245	ENDIF ! (MOD(itapwk,wkpas).EQ.0)
[2469]	3246	!
[2730]	3247	itapwk = itapwk+1
[2469]	3248	!
	3249	!-----------------------------------------------------------------------
	3250	! ajout des tendances des poches froides
	3251	CALL add_phys_tend(du0,dv0,d_t_wake,d_q_wake,dql0,dqi0,paprs,'wake', &
[2812]	3252	abortphy,flag_inhib_tend,itap,0)
[3461]	3253	CALL prt_enerbil('wake',itap)
[2469]	3254	!------------------------------------------------------------------------
[879]	3255
[2730]	3256	! Increment Wake state variables
[2635]	3257	IF (iflag_wake_tend .GT. 0.) THEN
	3258
	3259	CALL add_wake_tend &
[3208]	3260	(d_deltat_wk, d_deltaq_wk, d_s_wk, d_dens_a_wk, d_dens_wk, wake_k, &
[2635]	3261	'wake', abortphy)
[3461]	3262	CALL prt_enerbil('wake',itap)
[2635]	3263	ENDIF ! (iflag_wake_tend .GT. 0.)
[3179]	3264	!
	3265	IF (prt_level .GE. 10) THEN
	3266	print *,' physiq, after calwake, wake_s: ',wake_s(:)
	3267	print *,' physiq, after calwake, wake_deltat: ',wake_deltat(:,1)
	3268	print *,' physiq, after calwake, wake_deltaq: ',wake_deltaq(:,1)
	3269	ENDIF
[2635]	3270
[3000]	3271	IF (iflag_alp_wk_cond .GT. 0.) THEN
	3272
[3435]	3273	CALL alpale_wk(phys_tstep, cell_area, wake_k, wake_s, wake_dens, wake_fip_0, &
[3000]	3274	wake_fip)
	3275	ELSE
	3276	wake_fip(:) = wake_fip_0(:)
	3277	ENDIF ! (iflag_alp_wk_cond .GT. 0.)
	3278
[2692]	3279	ENDIF ! (iflag_wake>=1)
[2469]	3280	!
	3281	!===================================================================
	3282	! Convection seche (thermiques ou ajustement)
	3283	!===================================================================
	3284	!
[2692]	3285	CALL stratocu_if(klon,klev,pctsrf,paprs, pplay,t_seri &
[2469]	3286	,seuil_inversion,weak_inversion,dthmin)
[878]	3287
	3288
	3289
[2469]	3290	d_t_ajsb(:,:)=0.
	3291	d_q_ajsb(:,:)=0.
	3292	d_t_ajs(:,:)=0.
	3293	d_u_ajs(:,:)=0.
	3294	d_v_ajs(:,:)=0.
	3295	d_q_ajs(:,:)=0.
	3296	clwcon0th(:,:)=0.
	3297	!
	3298	! fm_therm(:,:)=0.
	3299	! entr_therm(:,:)=0.
	3300	! detr_therm(:,:)=0.
	3301	!
[2692]	3302	IF (prt_level>9) WRITE(lunout,*) &
[2469]	3303	'AVANT LA CONVECTION SECHE , iflag_thermals=' &
	3304	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[2692]	3305	IF (iflag_thermals<0) THEN
[2469]	3306	! Rien
	3307	! ====
[2692]	3308	IF (prt_level>9) WRITE(lunout,*)'pas de convection seche'
[541]	3309
[878]	3310
[2692]	3311	ELSE
[878]	3312
[2469]	3313	! Thermiques
	3314	! ==========
[2692]	3315	IF (prt_level>9) WRITE(lunout,*)'JUSTE AVANT , iflag_thermals=' &
[2469]	3316	,iflag_thermals,' nsplit_thermals=',nsplit_thermals
[878]	3317
	3318
[2469]	3319	!cc nrlmd le 10/04/2012
	3320	DO k=1,klev+1
	3321	DO i=1,klon
	3322	pbl_tke_input(i,k,is_oce)=pbl_tke(i,k,is_oce)
	3323	pbl_tke_input(i,k,is_ter)=pbl_tke(i,k,is_ter)
	3324	pbl_tke_input(i,k,is_lic)=pbl_tke(i,k,is_lic)
	3325	pbl_tke_input(i,k,is_sic)=pbl_tke(i,k,is_sic)
[2159]	3326	ENDDO
[2469]	3327	ENDDO
	3328	!cc fin nrlmd le 10/04/2012
[1403]	3329
[2692]	3330	IF (iflag_thermals>=1) THEN
[2469]	3331	!jyg<
[2852]	3332	!! IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3333	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3334	! Appel des thermiques avec les profils exterieurs aux poches
	3335	DO k=1,klev
	3336	DO i=1,klon
	3337	t_therm(i,k) = t_seri(i,k) - wake_s(i)*wake_deltat(i,k)
	3338	q_therm(i,k) = q_seri(i,k) - wake_s(i)*wake_deltaq(i,k)
[2606]	3339	u_therm(i,k) = u_seri(i,k)
	3340	v_therm(i,k) = v_seri(i,k)
[2469]	3341	ENDDO
	3342	ENDDO
	3343	ELSE
	3344	! Appel des thermiques avec les profils moyens
	3345	DO k=1,klev
	3346	DO i=1,klon
	3347	t_therm(i,k) = t_seri(i,k)
	3348	q_therm(i,k) = q_seri(i,k)
[2606]	3349	u_therm(i,k) = u_seri(i,k)
	3350	v_therm(i,k) = v_seri(i,k)
[2469]	3351	ENDDO
	3352	ENDDO
	3353	ENDIF
	3354	!>jyg
[2692]	3355	CALL calltherm(pdtphys &
[2469]	3356	,pplay,paprs,pphi,weak_inversion &
[2606]	3357	! ,u_seri,v_seri,t_seri,q_seri,zqsat,debut & !jyg
	3358	,u_therm,v_therm,t_therm,q_therm,zqsat,debut & !jyg
[2469]	3359	,d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs &
	3360	,fm_therm,entr_therm,detr_therm &
	3361	,zqasc,clwcon0th,lmax_th,ratqscth &
	3362	,ratqsdiff,zqsatth &
	3363	!on rajoute ale et alp, et les
	3364	!caracteristiques de la couche alim
	3365	,Ale_bl,Alp_bl,lalim_conv,wght_th, zmax0, f0, zw2,fraca &
	3366	,ztv,zpspsk,ztla,zthl &
	3367	!cc nrlmd le 10/04/2012
	3368	,pbl_tke_input,pctsrf,omega,cell_area &
	3369	,zlcl_th,fraca0,w0,w_conv,therm_tke_max0,env_tke_max0 &
	3370	,n2,s2,ale_bl_stat &
	3371	,therm_tke_max,env_tke_max &
	3372	,alp_bl_det,alp_bl_fluct_m,alp_bl_fluct_tke &
	3373	,alp_bl_conv,alp_bl_stat &
	3374	!cc fin nrlmd le 10/04/2012
	3375	,zqla,ztva )
	3376	!
	3377	!jyg<
[2852]	3378	!!jyg IF (mod(iflag_pbl_split/2,2) .EQ. 1) THEN
	3379	IF (mod(iflag_pbl_split/10,10) .GE. 1) THEN
[2469]	3380	! Si les thermiques ne sont presents que hors des
	3381	! poches, la tendance moyenne associ\'ee doit etre
	3382	! multipliee par la fraction surfacique qu'ils couvrent.
	3383	DO k=1,klev
	3384	DO i=1,klon
	3385	!
[2635]	3386	d_deltat_the(i,k) = - d_t_ajs(i,k)
	3387	d_deltaq_the(i,k) = - d_q_ajs(i,k)
[2469]	3388	!
	3389	d_u_ajs(i,k) = d_u_ajs(i,k)*(1.-wake_s(i))
	3390	d_v_ajs(i,k) = d_v_ajs(i,k)*(1.-wake_s(i))
	3391	d_t_ajs(i,k) = d_t_ajs(i,k)*(1.-wake_s(i))
	3392	d_q_ajs(i,k) = d_q_ajs(i,k)*(1.-wake_s(i))
	3393	!
	3394	ENDDO
	3395	ENDDO
[2606]	3396	!
[3180]	3397	IF (ok_bug_split_th) THEN
	3398	CALL add_wake_tend &
[3208]	3399	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wkoccur1, 'the', abortphy)
[3180]	3400	ELSE
	3401	CALL add_wake_tend &
[3208]	3402	(d_deltat_the, d_deltaq_the, dsig0, ddens0, ddens0, wake_k, 'the', abortphy)
[3180]	3403	ENDIF
[3461]	3404	CALL prt_enerbil('the',itap)
[2638]	3405	!
[2852]	3406	ENDIF ! (mod(iflag_pbl_split/10,10) .GE. 1)
[2638]	3407	!
[2606]	3408	CALL add_phys_tend(d_u_ajs,d_v_ajs,d_t_ajs,d_q_ajs, &
[2812]	3409	dql0,dqi0,paprs,'thermals', abortphy,flag_inhib_tend,itap,0)
[3461]	3410	CALL prt_enerbil('thermals',itap)
[2606]	3411	!
[2513]	3412	!
[3435]	3413	CALL alpale_th( phys_tstep, lmax_th, t_seri, cell_area, &
[2513]	3414	cin, s2, n2, &
	3415	ale_bl_trig, ale_bl_stat, ale_bl, &
[2556]	3416	alp_bl, alp_bl_stat, &
[3208]	3417	proba_notrig, random_notrig, cv_gen)
[2635]	3418	!>jyg
[1638]	3419
[2554]	3420	! ------------------------------------------------------------------
	3421	! Transport de la TKE par les panaches thermiques.
	3422	! FH : 2010/02/01
	3423	! if (iflag_pbl.eq.10) then
	3424	! call thermcell_dtke(klon,klev,nbsrf,pdtphys,fm_therm,entr_therm,
	3425	! s rg,paprs,pbl_tke)
	3426	! endif
	3427	! -------------------------------------------------------------------
	3428
[2692]	3429	DO i=1,klon
[2469]	3430	! zmax_th(i)=pphi(i,lmax_th(i))/rg
	3431	!CR:04/05/12:correction calcul zmax
	3432	zmax_th(i)=zmax0(i)
[2692]	3433	ENDDO
[1507]	3434
[2692]	3435	ENDIF
[878]	3436
[2469]	3437	! Ajustement sec
	3438	! ==============
[878]	3439
[2469]	3440	! Dans le cas o\`u on active les thermiques, on fait partir l'ajustement
	3441	! a partir du sommet des thermiques.
	3442	! Dans le cas contraire, on demarre au niveau 1.
[878]	3443
[2692]	3444	IF (iflag_thermals>=13.or.iflag_thermals<=0) THEN
[878]	3445
[2692]	3446	IF (iflag_thermals.eq.0) THEN
	3447	IF (prt_level>9) WRITE(lunout,*)'ajsec'
[2469]	3448	limbas(:)=1
[2692]	3449	ELSE
[2469]	3450	limbas(:)=lmax_th(:)
[2692]	3451	ENDIF
[878]	3452
[2469]	3453	! Attention : le call ajsec_convV2 n'est maintenu que momentanneement
	3454	! pour des test de convergence numerique.
	3455	! Le nouveau ajsec est a priori mieux, meme pour le cas
	3456	! iflag_thermals = 0 (l'ancienne version peut faire des tendances
	3457	! non nulles numeriquement pour des mailles non concernees.
[878]	3458
[2692]	3459	IF (iflag_thermals==0) THEN
[2469]	3460	! Calling adjustment alone (but not the thermal plume model)
	3461	CALL ajsec_convV2(paprs, pplay, t_seri,q_seri &
	3462	, d_t_ajsb, d_q_ajsb)
[2692]	3463	ELSE IF (iflag_thermals>0) THEN
[2469]	3464	! Calling adjustment above the top of thermal plumes
	3465	CALL ajsec(paprs, pplay, t_seri,q_seri,limbas &
	3466	, d_t_ajsb, d_q_ajsb)
[2692]	3467	ENDIF
[878]	3468
[2469]	3469	!--------------------------------------------------------------------
	3470	! ajout des tendances de l'ajustement sec ou des thermiques
	3471	CALL add_phys_tend(du0,dv0,d_t_ajsb,d_q_ajsb,dql0,dqi0,paprs, &
[2812]	3472	'ajsb',abortphy,flag_inhib_tend,itap,0)
[3461]	3473	CALL prt_enerbil('ajsb',itap)
[2469]	3474	d_t_ajs(:,:)=d_t_ajs(:,:)+d_t_ajsb(:,:)
	3475	d_q_ajs(:,:)=d_q_ajs(:,:)+d_q_ajsb(:,:)
[904]	3476
[2469]	3477	!---------------------------------------------------------------------
[878]	3478
[2692]	3479	ENDIF
[524]	3480
[2692]	3481	ENDIF
[2469]	3482	!
	3483	!===================================================================
	3484	! Computation of ratqs, the width (normalized) of the subrid scale
	3485	! water distribution
	3486	CALL calcratqs(klon,klev,prt_level,lunout, &
	3487	iflag_ratqs,iflag_con,iflag_cld_th,pdtphys, &
[2534]	3488	ratqsbas,ratqshaut,ratqsp0, ratqsdp, &
	3489	tau_ratqs,fact_cldcon, &
[2469]	3490	ptconv,ptconvth,clwcon0th, rnebcon0th, &
	3491	paprs,pplay,q_seri,zqsat,fm_therm, &
	3492	ratqs,ratqsc)
[1032]	3493
[2100]	3494
[2469]	3495	!
	3496	! Appeler le processus de condensation a grande echelle
	3497	! et le processus de precipitation
	3498	!-------------------------------------------------------------------------
	3499	IF (prt_level .GE.10) THEN
	3500	print *,'itap, ->fisrtilp ',itap
	3501	ENDIF
	3502	!
[3435]	3503	CALL fisrtilp(phys_tstep,paprs,pplay, &
[2469]	3504	t_seri, q_seri,ptconv,ratqs, &
	3505	d_t_lsc, d_q_lsc, d_ql_lsc, d_qi_lsc, rneb, cldliq, &
	3506	rain_lsc, snow_lsc, &
	3507	pfrac_impa, pfrac_nucl, pfrac_1nucl, &
	3508	frac_impa, frac_nucl, beta_prec_fisrt, &
	3509	prfl, psfl, rhcl, &
	3510	zqasc, fraca,ztv,zpspsk,ztla,zthl,iflag_cld_th, &
	3511	iflag_ice_thermo)
	3512	!
	3513	WHERE (rain_lsc < 0) rain_lsc = 0.
	3514	WHERE (snow_lsc < 0) snow_lsc = 0.
[766]	3515
[2799]	3516	!+JLD
	3517	! write(*,9000) 'phys lsc',"enerbil: bil_q, bil_e,",rain_lsc+snow_lsc &
	3518	! & ,((rcw-rcpd)rain_lsc + (rcs-rcpd)snow_lsc)t_seri(1,1)-rlvttrain_lsc+rlstt*snow_lsc &
	3519	! & ,rain_lsc,snow_lsc
	3520	! write(*,9000) "rcpv","rcw",rcpv,rcw,rcs,t_seri(1,1)
	3521	!-JLD
[2469]	3522	CALL add_phys_tend(du0,dv0,d_t_lsc,d_q_lsc,d_ql_lsc,d_qi_lsc,paprs, &
[2812]	3523	'lsc',abortphy,flag_inhib_tend,itap,0)
[3461]	3524	CALL prt_enerbil('lsc',itap)
[2613]	3525	rain_num(:)=0.
[2657]	3526	DO k = 1, klev
[2613]	3527	DO i = 1, klon
	3528	IF (ql_seri(i,k)>oliqmax) THEN
	3529	rain_num(i)=rain_num(i)+(ql_seri(i,k)-oliqmax)*zmasse(i,k)/pdtphys
	3530	ql_seri(i,k)=oliqmax
	3531	ENDIF
	3532	ENDDO
	3533	ENDDO
[2657]	3534	IF (nqo==3) THEN
	3535	DO k = 1, klev
	3536	DO i = 1, klon
	3537	IF (qs_seri(i,k)>oicemax) THEN
	3538	rain_num(i)=rain_num(i)+(qs_seri(i,k)-oicemax)*zmasse(i,k)/pdtphys
	3539	qs_seri(i,k)=oicemax
	3540	ENDIF
	3541	ENDDO
	3542	ENDDO
	3543	ENDIF
[2613]	3544
[2524]	3545	!---------------------------------------------------------------------------
[2469]	3546	DO k = 1, klev
	3547	DO i = 1, klon
	3548	cldfra(i,k) = rneb(i,k)
	3549	!CR: a quoi ca sert? Faut-il ajouter qs_seri?
	3550	IF (.NOT.new_oliq) cldliq(i,k) = ql_seri(i,k)
	3551	ENDDO
	3552	ENDDO
	3553	IF (check) THEN
	3554	za = qcheck(klon,klev,paprs,q_seri,ql_seri,cell_area)
	3555	WRITE(lunout,*)"apresilp=", za
	3556	zx_t = 0.0
	3557	za = 0.0
	3558	DO i = 1, klon
	3559	za = za + cell_area(i)/REAL(klon)
	3560	zx_t = zx_t + (rain_lsc(i) &
	3561	+ snow_lsc(i))*cell_area(i)/REAL(klon)
	3562	ENDDO
[3435]	3563	zx_t = zx_t/za*phys_tstep
[2469]	3564	WRITE(lunout,*)"Precip=", zx_t
	3565	ENDIF
[766]	3566
[2692]	3567	IF (mydebug) THEN
	3568	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	3569	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	3570	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	3571	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	3572	ENDIF
[524]	3573
[2469]	3574	!
	3575	!-------------------------------------------------------------------
	3576	! PRESCRIPTION DES NUAGES POUR LE RAYONNEMENT
	3577	!-------------------------------------------------------------------
[524]	3578
[2469]	3579	! 1. NUAGES CONVECTIFS
	3580	!
	3581	!IM cf FH
	3582	! IF (iflag_cld_th.eq.-1) THEN ! seulement pour Tiedtke
	3583	IF (iflag_cld_th.le.-1) THEN ! seulement pour Tiedtke
	3584	snow_tiedtke=0.
	3585	! print*,'avant calcul de la pseudo precip '
	3586	! print*,'iflag_cld_th',iflag_cld_th
[2692]	3587	IF (iflag_cld_th.eq.-1) THEN
[2469]	3588	rain_tiedtke=rain_con
[2692]	3589	ELSE
[2469]	3590	! print*,'calcul de la pseudo precip '
	3591	rain_tiedtke=0.
	3592	! print*,'calcul de la pseudo precip 0'
[2692]	3593	DO k=1,klev
	3594	DO i=1,klon
	3595	IF (d_q_con(i,k).lt.0.) THEN
[2469]	3596	rain_tiedtke(i)=rain_tiedtke(i)-d_q_con(i,k)/pdtphys &
	3597	*(paprs(i,k)-paprs(i,k+1))/rg
[2692]	3598	ENDIF
	3599	ENDDO
	3600	ENDDO
	3601	ENDIF
[2469]	3602	!
	3603	! call dump2d(iim,jjm,rain_tiedtke(2:klon-1),'PSEUDO PRECIP ')
	3604	!
[524]	3605
[2469]	3606	! Nuages diagnostiques pour Tiedtke
	3607	CALL diagcld1(paprs,pplay, &
	3608	!IM cf FH. rain_con,snow_con,ibas_con,itop_con,
	3609	rain_tiedtke,snow_tiedtke,ibas_con,itop_con, &
	3610	diafra,dialiq)
	3611	DO k = 1, klev
	3612	DO i = 1, klon
	3613	IF (diafra(i,k).GT.cldfra(i,k)) THEN
	3614	cldliq(i,k) = dialiq(i,k)
	3615	cldfra(i,k) = diafra(i,k)
	3616	ENDIF
	3617	ENDDO
	3618	ENDDO
[524]	3619
[2469]	3620	ELSE IF (iflag_cld_th.ge.3) THEN
	3621	! On prend pour les nuages convectifs le max du calcul de la
	3622	! convection et du calcul du pas de temps precedent diminue d'un facteur
	3623	! facttemps
	3624	facteur = pdtphys *facttemps
[2692]	3625	DO k=1,klev
	3626	DO i=1,klon
[2469]	3627	rnebcon(i,k)=rnebcon(i,k)*facteur
[2692]	3628	IF (rnebcon0(i,k)clwcon0(i,k).GT.rnebcon(i,k)clwcon(i,k)) THEN
[2469]	3629	rnebcon(i,k)=rnebcon0(i,k)
	3630	clwcon(i,k)=clwcon0(i,k)
[2692]	3631	ENDIF
	3632	ENDDO
	3633	ENDDO
[2469]	3634
	3635	! On prend la somme des fractions nuageuses et des contenus en eau
[524]	3636
[2692]	3637	IF (iflag_cld_th>=5) THEN
[1411]	3638
[2692]	3639	DO k=1,klev
[2469]	3640	ptconvth(:,k)=fm_therm(:,k+1)>0.
[2692]	3641	ENDDO
[1496]	3642
[2692]	3643	IF (iflag_coupl==4) THEN
[1496]	3644
[2469]	3645	! Dans le cas iflag_coupl==4, on prend la somme des convertures
	3646	! convectives et lsc dans la partie des thermiques
	3647	! Le controle par iflag_coupl est peut etre provisoire.
[2692]	3648	DO k=1,klev
	3649	DO i=1,klon
	3650	IF (ptconv(i,k).AND.ptconvth(i,k)) THEN
[2469]	3651	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
	3652	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
[2692]	3653	ELSE IF (ptconv(i,k)) THEN
[2469]	3654	cldfra(i,k)=rnebcon(i,k)
	3655	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3656	ENDIF
	3657	ENDDO
	3658	ENDDO
[1496]	3659
[2692]	3660	ELSE IF (iflag_coupl==5) THEN
	3661	DO k=1,klev
	3662	DO i=1,klon
[2469]	3663	cldfra(i,k)=min(cldfra(i,k)+rnebcon(i,k),1.)
	3664	cldliq(i,k)=cldliq(i,k)+rnebcon(i,k)*clwcon(i,k)
[2692]	3665	ENDDO
	3666	ENDDO
[1525]	3667
[2692]	3668	ELSE
[1525]	3669
[2469]	3670	! Si on est sur un point touche par la convection
	3671	! profonde et pas par les thermiques, on prend la
	3672	! couverture nuageuse et l'eau nuageuse de la convection
	3673	! profonde.
[1411]	3674
[2469]	3675	!IM/FH: 2011/02/23
	3676	! definition des points sur lesquels ls thermiques sont actifs
[1496]	3677
[2692]	3678	DO k=1,klev
	3679	DO i=1,klon
	3680	IF (ptconv(i,k).AND. .NOT.ptconvth(i,k)) THEN
[2469]	3681	cldfra(i,k)=rnebcon(i,k)
	3682	cldliq(i,k)=rnebcon(i,k)*clwcon(i,k)
[2692]	3683	ENDIF
	3684	ENDDO
	3685	ENDDO
[1496]	3686
[2692]	3687	ENDIF
[1496]	3688
[2692]	3689	ELSE
[1496]	3690
[2469]	3691	! Ancienne version
	3692	cldfra(:,:)=min(max(cldfra(:,:),rnebcon(:,:)),1.)
	3693	cldliq(:,:)=cldliq(:,:)+rnebcon(:,:)*clwcon(:,:)
[2692]	3694	ENDIF
[1411]	3695
[2469]	3696	ENDIF
[1507]	3697
[2469]	3698	! plulsc(:)=0.
	3699	! do k=1,klev,-1
	3700	! do i=1,klon
	3701	! zzz=prfl(:,k)+psfl(:,k)
	3702	! if (.not.ptconvth.zzz.gt.0.)
	3703	! enddo prfl, psfl,
	3704	! enddo
	3705	!
	3706	! 2. NUAGES STARTIFORMES
	3707	!
	3708	IF (ok_stratus) THEN
	3709	CALL diagcld2(paprs,pplay,t_seri,q_seri, diafra,dialiq)
	3710	DO k = 1, klev
	3711	DO i = 1, klon
	3712	IF (diafra(i,k).GT.cldfra(i,k)) THEN
	3713	cldliq(i,k) = dialiq(i,k)
	3714	cldfra(i,k) = diafra(i,k)
	3715	ENDIF
	3716	ENDDO
	3717	ENDDO
	3718	ENDIF
	3719	!
	3720	! Precipitation totale
	3721	!
	3722	DO i = 1, klon
	3723	rain_fall(i) = rain_con(i) + rain_lsc(i)
	3724	snow_fall(i) = snow_con(i) + snow_lsc(i)
	3725	ENDDO
	3726	!
	3727	! Calculer l'humidite relative pour diagnostique
	3728	!
	3729	DO k = 1, klev
	3730	DO i = 1, klon
	3731	zx_t = t_seri(i,k)
	3732	IF (thermcep) THEN
	3733	!! if (iflag_ice_thermo.eq.0) then !jyg
	3734	zdelta = MAX(0.,SIGN(1.,rtt-zx_t))
	3735	!! else !jyg
	3736	!! zdelta = MAX(0.,SIGN(1.,t_glace_min-zx_t)) !jyg
	3737	!! endif !jyg
	3738	zx_qs = r2es * FOEEW(zx_t,zdelta)/pplay(i,k)
	3739	zx_qs = MIN(0.5,zx_qs)
	3740	zcor = 1./(1.-retv*zx_qs)
	3741	zx_qs = zx_qs*zcor
	3742	ELSE
	3743	!! IF (zx_t.LT.t_coup) THEN !jyg
	3744	IF (zx_t.LT.rtt) THEN !jyg
	3745	zx_qs = qsats(zx_t)/pplay(i,k)
	3746	ELSE
	3747	zx_qs = qsatl(zx_t)/pplay(i,k)
	3748	ENDIF
	3749	ENDIF
	3750	zx_rh(i,k) = q_seri(i,k)/zx_qs
[3784]	3751	IF (iflag_ice_thermo .GT. 0) THEN
[3780]	3752	zx_rhl(i,k) = q_seri(i,k)/(qsatl(zx_t)/pplay(i,k))
	3753	zx_rhi(i,k) = q_seri(i,k)/(qsats(zx_t)/pplay(i,k))
[3784]	3754	ENDIF
[2469]	3755	zqsat(i,k)=zx_qs
	3756	ENDDO
	3757	ENDDO
[782]	3758
[2469]	3759	!IM Calcul temp.potentielle a 2m (tpot) et temp. potentielle
	3760	! equivalente a 2m (tpote) pour diagnostique
	3761	!
	3762	DO i = 1, klon
	3763	tpot(i)=zt2m(i)(100000./paprs(i,1))*RKAPPA
	3764	IF (thermcep) THEN
	3765	IF(zt2m(i).LT.RTT) then
	3766	Lheat=RLSTT
	3767	ELSE
	3768	Lheat=RLVTT
	3769	ENDIF
	3770	ELSE
	3771	IF (zt2m(i).LT.RTT) THEN
	3772	Lheat=RLSTT
	3773	ELSE
	3774	Lheat=RLVTT
	3775	ENDIF
	3776	ENDIF
	3777	tpote(i) = tpot(i)* &
	3778	EXP((Lheat qsat2m(i))/(RCPDzt2m(i)))
	3779	ENDDO
[524]	3780
[2469]	3781	IF (type_trac == 'inca') THEN
[524]	3782	#ifdef INCA
[2469]	3783	CALL VTe(VTphysiq)
	3784	CALL VTb(VTinca)
	3785	calday = REAL(days_elapsed + 1) + jH_cur
[524]	3786
[3435]	3787	CALL chemtime(itap+itau_phy-1, date0, phys_tstep, itap)
[3563]	3788	CALL AEROSOL_METEO_CALC( &
	3789	calday,pdtphys,pplay,paprs,t,pmflxr,pmflxs, &
	3790	prfl,psfl,pctsrf,cell_area, &
	3791	latitude_deg,longitude_deg,u10m,v10m)
[524]	3792
[2469]	3793	zxsnow_dummy(:) = 0.0
[625]	3794
[2469]	3795	CALL chemhook_begin (calday, &
	3796	days_elapsed+1, &
	3797	jH_cur, &
	3798	pctsrf(1,1), &
	3799	latitude_deg, &
	3800	longitude_deg, &
	3801	cell_area, &
	3802	paprs, &
	3803	pplay, &
	3804	coefh(1:klon,1:klev,is_ave), &
	3805	pphi, &
	3806	t_seri, &
	3807	u, &
	3808	v, &
[3613]	3809	rot, &
[2469]	3810	wo(:, :, 1), &
	3811	q_seri, &
	3812	zxtsol, &
[3613]	3813	zt2m, &
[2469]	3814	zxsnow_dummy, &
	3815	solsw, &
	3816	albsol1, &
	3817	rain_fall, &
	3818	snow_fall, &
	3819	itop_con, &
	3820	ibas_con, &
	3821	cldfra, &
	3822	nbp_lon, &
	3823	nbp_lat-1, &
	3824	tr_seri, &
	3825	ftsol, &
	3826	paprs, &
	3827	cdragh, &
	3828	cdragm, &
	3829	pctsrf, &
	3830	pdtphys, &
	3831	itap)
[616]	3832
[2469]	3833	CALL VTe(VTinca)
	3834	CALL VTb(VTphysiq)
[959]	3835	#endif
[2692]	3836	ENDIF !type_trac = inca
[3666]	3837	IF (type_trac == 'repr') THEN
	3838	#ifdef REPROBUS
	3839	!CALL chemtime_rep(itap+itau_phy-1, date0, dtime, itap)
	3840	CALL chemtime_rep(itap+itau_phy-1, date0, phys_tstep, itap)
	3841	#endif
	3842	ENDIF
[2618]	3843
[2469]	3844	!
[2618]	3845	! Appeler le rayonnement mais calculer tout d'abord l'albedo du sol.
	3846	!
	3847	IF (MOD(itaprad,radpas).EQ.0) THEN
[959]	3848
[2618]	3849	!
	3850	!jq - introduce the aerosol direct and first indirect radiative forcings
	3851	!jq - Johannes Quaas, 27/11/2003 (quaas@lmd.jussieu.fr)
[2738]	3852	IF (flag_aerosol .GT. 0) THEN
[2618]	3853	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	3854	IF (.NOT. aerosol_couple) THEN
	3855	!
	3856	CALL readaerosol_optic( &
[3630]	3857	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	3858	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3859	mass_solu_aero, mass_solu_aero_pi, &
	3860	tau_aero, piz_aero, cg_aero, &
	3861	tausum_aero, tau3d_aero)
	3862	ENDIF
	3863	ELSE ! RRTM radiation
	3864	IF (aerosol_couple .AND. config_inca == 'aero' ) THEN
	3865	abort_message='config_inca=aero et rrtm=1 impossible'
[2692]	3866	CALL abort_physic(modname,abort_message,1)
[2618]	3867	ELSE
	3868	!
	3869	#ifdef CPP_RRTM
	3870	IF (NSW.EQ.6) THEN
[2738]	3871	!--new aerosol properties SW and LW
[2618]	3872	!
[2753]	3873	#ifdef CPP_Dust
	3874	!--SPL aerosol model
	3875	CALL splaerosol_optic_rrtm( ok_alw, pplay, paprs, t_seri, rhcl, &
	3876	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	3877	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	3878	tausum_aero, tau3d_aero)
	3879	#else
	3880	!--climatologies or INCA aerosols
[3480]	3881	CALL readaerosol_optic_rrtm( debut, aerosol_couple, ok_alw, ok_volcan, &
[3630]	3882	flag_aerosol, flag_bc_internal_mixture, itap, jD_cur-jD_ref, &
[2618]	3883	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3884	tr_seri, mass_solu_aero, mass_solu_aero_pi, &
	3885	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
[2854]	3886	tausum_aero, drytausum_aero, tau3d_aero)
[2753]	3887	#endif
[3274]	3888
	3889	IF (flag_aerosol .EQ. 7) THEN
	3890	CALL MACv2SP(pphis,pplay,paprs,longitude_deg,latitude_deg, &
	3891	tau_aero_sw_rrtm,piz_aero_sw_rrtm,cg_aero_sw_rrtm)
	3892	ENDIF
	3893
[2738]	3894	!
[2618]	3895	ELSE IF (NSW.EQ.2) THEN
	3896	!--for now we use the old aerosol properties
	3897	!
	3898	CALL readaerosol_optic( &
[3630]	3899	debut, flag_aerosol, itap, jD_cur-jD_ref, &
[2618]	3900	pdtphys, pplay, paprs, t_seri, rhcl, presnivs, &
	3901	mass_solu_aero, mass_solu_aero_pi, &
	3902	tau_aero, piz_aero, cg_aero, &
	3903	tausum_aero, tau3d_aero)
	3904	!
	3905	!--natural aerosols
	3906	tau_aero_sw_rrtm(:,:,1,:)=tau_aero(:,:,3,:)
	3907	piz_aero_sw_rrtm(:,:,1,:)=piz_aero(:,:,3,:)
	3908	cg_aero_sw_rrtm (:,:,1,:)=cg_aero (:,:,3,:)
	3909	!--all aerosols
	3910	tau_aero_sw_rrtm(:,:,2,:)=tau_aero(:,:,2,:)
	3911	piz_aero_sw_rrtm(:,:,2,:)=piz_aero(:,:,2,:)
	3912	cg_aero_sw_rrtm (:,:,2,:)=cg_aero (:,:,2,:)
[2738]	3913	!
	3914	!--no LW optics
	3915	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	3916	!
[2618]	3917	ELSE
	3918	abort_message='Only NSW=2 or 6 are possible with ' &
	3919	// 'aerosols and iflag_rrtm=1'
[2692]	3920	CALL abort_physic(modname,abort_message,1)
[2618]	3921	ENDIF
	3922	#else
	3923	abort_message='You should compile with -rrtm if running ' &
	3924	// 'with iflag_rrtm=1'
[2692]	3925	CALL abort_physic(modname,abort_message,1)
[2618]	3926	#endif
	3927	!
	3928	ENDIF
	3929	ENDIF
[2738]	3930	ELSE !--flag_aerosol = 0
[2618]	3931	tausum_aero(:,:,:) = 0.
[2854]	3932	drytausum_aero(:,:) = 0.
[2640]	3933	mass_solu_aero(:,:) = 0.
	3934	mass_solu_aero_pi(:,:) = 0.
[2618]	3935	IF (iflag_rrtm .EQ. 0) THEN !--old radiation
	3936	tau_aero(:,:,:,:) = 1.e-15
	3937	piz_aero(:,:,:,:) = 1.
	3938	cg_aero(:,:,:,:) = 0.
	3939	ELSE
	3940	tau_aero_sw_rrtm(:,:,:,:) = 1.e-15
	3941	tau_aero_lw_rrtm(:,:,:,:) = 1.e-15
	3942	piz_aero_sw_rrtm(:,:,:,:) = 1.0
	3943	cg_aero_sw_rrtm(:,:,:,:) = 0.0
	3944	ENDIF
	3945	ENDIF
	3946	!
[2994]	3947	!--WMO criterion to determine tropopause
[3123]	3948	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2994]	3949	!
[2618]	3950	!--STRAT AEROSOL
	3951	!--updates tausum_aero,tau_aero,piz_aero,cg_aero
	3952	IF (flag_aerosol_strat.GT.0) THEN
	3953	IF (prt_level .GE.10) THEN
	3954	PRINT *,'appel a readaerosolstrat', mth_cur
	3955	ENDIF
	3956	IF (iflag_rrtm.EQ.0) THEN
	3957	IF (flag_aerosol_strat.EQ.1) THEN
	3958	CALL readaerosolstrato(debut)
	3959	ELSE
	3960	abort_message='flag_aerosol_strat must equal 1 for rrtm=0'
	3961	CALL abort_physic(modname,abort_message,1)
	3962	ENDIF
	3963	ELSE
[2009]	3964	#ifdef CPP_RRTM
[2690]	3965	#ifndef CPP_StratAer
	3966	!--prescribed strat aerosols
	3967	!--only in the case of non-interactive strat aerosols
[2618]	3968	IF (flag_aerosol_strat.EQ.1) THEN
	3969	CALL readaerosolstrato1_rrtm(debut)
	3970	ELSEIF (flag_aerosol_strat.EQ.2) THEN
[3480]	3971	CALL readaerosolstrato2_rrtm(debut, ok_volcan)
[2618]	3972	ELSE
	3973	abort_message='flag_aerosol_strat must equal 1 or 2 for rrtm=1'
	3974	CALL abort_physic(modname,abort_message,1)
	3975	ENDIF
[2690]	3976	#endif
[2618]	3977	#else
	3978	abort_message='You should compile with -rrtm if running ' &
	3979	// 'with iflag_rrtm=1'
	3980	CALL abort_physic(modname,abort_message,1)
	3981	#endif
	3982	ENDIF
[3567]	3983	ELSE
	3984	tausum_aero(:,:,id_STRAT_phy) = 0.
[2618]	3985	ENDIF
[2690]	3986	!
	3987	#ifdef CPP_RRTM
	3988	#ifdef CPP_StratAer
[2692]	3989	!--compute stratospheric mask
[3123]	3990	CALL stratosphere_mask(missing_val, pphis, t_seri, pplay, latitude_deg)
[2690]	3991	!--interactive strat aerosols
	3992	CALL calcaerosolstrato_rrtm(pplay,t_seri,paprs,debut)
	3993	#endif
	3994	#endif
[2618]	3995	!--fin STRAT AEROSOL
	3996	!
	3997
	3998	! Calculer les parametres optiques des nuages et quelques
	3999	! parametres pour diagnostiques:
	4000	!
	4001	IF (aerosol_couple.AND.config_inca=='aero') THEN
	4002	mass_solu_aero(:,:) = ccm(:,:,1)
	4003	mass_solu_aero_pi(:,:) = ccm(:,:,2)
[2692]	4004	ENDIF
[2618]	4005
	4006	IF (ok_newmicro) then
	4007	IF (iflag_rrtm.NE.0) THEN
	4008	#ifdef CPP_RRTM
	4009	IF (ok_cdnc.AND.NRADLP.NE.3) THEN
[2469]	4010	abort_message='RRTM choix incoherent NRADLP doit etre egal a 3 ' &
	4011	// 'pour ok_cdnc'
[2618]	4012	CALL abort_physic(modname,abort_message,1)
	4013	ENDIF
[2009]	4014	#else
	4015
[2618]	4016	abort_message='You should compile with -rrtm if running with '//'iflag_rrtm=1'
	4017	CALL abort_physic(modname,abort_message,1)
[2009]	4018	#endif
[2618]	4019	ENDIF
[3274]	4020	CALL newmicro (flag_aerosol, ok_cdnc, bl95_b0, bl95_b1, &
[2618]	4021	paprs, pplay, t_seri, cldliq, cldfra, &
	4022	cldtau, cldemi, cldh, cldl, cldm, cldt, cldq, &
	4023	flwp, fiwp, flwc, fiwc, &
	4024	mass_solu_aero, mass_solu_aero_pi, &
	4025	cldtaupi, re, fl, ref_liq, ref_ice, &
	4026	ref_liq_pi, ref_ice_pi)
	4027	ELSE
	4028	CALL nuage (paprs, pplay, &
	4029	t_seri, cldliq, cldfra, cldtau, cldemi, &
	4030	cldh, cldl, cldm, cldt, cldq, &
	4031	ok_aie, &
	4032	mass_solu_aero, mass_solu_aero_pi, &
	4033	bl95_b0, bl95_b1, &
	4034	cldtaupi, re, fl)
[2469]	4035	ENDIF
	4036	!
[2618]	4037	!IM betaCRF
[2469]	4038	!
[2618]	4039	cldtaurad = cldtau
	4040	cldtaupirad = cldtaupi
	4041	cldemirad = cldemi
	4042	cldfrarad = cldfra
	4043
[2469]	4044	!
[2618]	4045	IF (lon1_beta.EQ.-180..AND.lon2_beta.EQ.180..AND. &
	4046	lat1_beta.EQ.90..AND.lat2_beta.EQ.-90.) THEN
	4047	!
	4048	! global
	4049	!
[3048]	4050	!IM 251017 begin
[3317]	4051	! print*,'physiq betaCRF global zdtime=',zdtime
[3048]	4052	!IM 251017 end
[2618]	4053	DO k=1, klev
	4054	DO i=1, klon
	4055	IF (pplay(i,k).GE.pfree) THEN
[2469]	4056	beta(i,k) = beta_pbl
[2618]	4057	ELSE
[2469]	4058	beta(i,k) = beta_free
[2618]	4059	ENDIF
	4060	IF (mskocean_beta) THEN
[2469]	4061	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
[2618]	4062	ENDIF
[2469]	4063	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4064	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4065	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4066	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
[2618]	4067	ENDDO
	4068	ENDDO
	4069	!
	4070	ELSE
	4071	!
	4072	! regional
	4073	!
	4074	DO k=1, klev
	4075	DO i=1,klon
	4076	!
	4077	IF (longitude_deg(i).ge.lon1_beta.AND. &
	4078	longitude_deg(i).le.lon2_beta.AND. &
	4079	latitude_deg(i).le.lat1_beta.AND. &
	4080	latitude_deg(i).ge.lat2_beta) THEN
	4081	IF (pplay(i,k).GE.pfree) THEN
	4082	beta(i,k) = beta_pbl
	4083	ELSE
	4084	beta(i,k) = beta_free
	4085	ENDIF
	4086	IF (mskocean_beta) THEN
	4087	beta(i,k) = beta(i,k) * pctsrf(i,is_oce)
	4088	ENDIF
	4089	cldtaurad(i,k) = cldtau(i,k) * beta(i,k)
	4090	cldtaupirad(i,k) = cldtaupi(i,k) * beta(i,k)
	4091	cldemirad(i,k) = cldemi(i,k) * beta(i,k)
	4092	cldfrarad(i,k) = cldfra(i,k) * beta(i,k)
	4093	ENDIF
[2469]	4094	!
[2618]	4095	ENDDO
[2469]	4096	ENDDO
	4097	!
[2618]	4098	ENDIF
[766]	4099
[2618]	4100	!lecture de la chlorophylle pour le nouvel albedo de Sunghye Baek
	4101	IF (ok_chlorophyll) THEN
[2469]	4102	print*,"-- reading chlorophyll"
[2618]	4103	CALL readchlorophyll(debut)
	4104	ENDIF
[1863]	4105
[2524]	4106	!--if ok_suntime_rrtm we use ancillay data for RSUN
	4107	!--previous values are therefore overwritten
	4108	!--this is needed for CMIP6 runs
	4109	!--and only possible for new radiation scheme
	4110	IF (iflag_rrtm.EQ.1.AND.ok_suntime_rrtm) THEN
[2525]	4111	#ifdef CPP_RRTM
[2524]	4112	CALL read_rsun_rrtm(debut)
[2525]	4113	#endif
[2524]	4114	ENDIF
	4115
[2692]	4116	IF (mydebug) THEN
	4117	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4118	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4119	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4120	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4121	ENDIF
[2524]	4122
[2469]	4123	!
	4124	!sonia : If Iflag_radia >=2, pertubation of some variables
	4125	!input to radiation (DICE)
	4126	!
	4127	IF (iflag_radia .ge. 2) THEN
	4128	zsav_tsol (:) = zxtsol(:)
[2692]	4129	CALL perturb_radlwsw(zxtsol,iflag_radia)
[2469]	4130	ENDIF
[2328]	4131
[2469]	4132	IF (aerosol_couple.AND.config_inca=='aero') THEN
[959]	4133	#ifdef INCA
[2469]	4134	CALL radlwsw_inca &
[3338]	4135	(chemistry_couple, kdlon,kflev,dist, rmu0, fract, solaire, &
[2469]	4136	paprs, pplay,zxtsol,albsol1, albsol2, t_seri,q_seri, &
[2684]	4137	size(wo,3), wo, &
[2469]	4138	cldfrarad, cldemirad, cldtaurad, &
	4139	heat,heat0,cool,cool0,albpla, &
	4140	topsw,toplw,solsw,sollw, &
	4141	sollwdown, &
	4142	topsw0,toplw0,solsw0,sollw0, &
	4143	lwdn0, lwdn, lwup0, lwup, &
	4144	swdn0, swdn, swup0, swup, &
	4145	ok_ade, ok_aie, &
	4146	tau_aero, piz_aero, cg_aero, &
	4147	topswad_aero, solswad_aero, &
	4148	topswad0_aero, solswad0_aero, &
	4149	topsw_aero, topsw0_aero, &
	4150	solsw_aero, solsw0_aero, &
	4151	cldtaupirad, &
	4152	topswai_aero, solswai_aero)
[955]	4153	#endif
[2469]	4154	ELSE
	4155	!
	4156	!IM calcul radiatif pour le cas actuel
	4157	!
	4158	RCO2 = RCO2_act
	4159	RCH4 = RCH4_act
	4160	RN2O = RN2O_act
	4161	RCFC11 = RCFC11_act
	4162	RCFC12 = RCFC12_act
[3450]	4163	!
	4164	!--interactive CO2 in ppm from carbon cycle
	4165	IF (carbon_cycle_rad.AND..NOT.debut) THEN
	4166	RCO2=RCO2_glo
	4167	ENDIF
[2469]	4168	!
	4169	IF (prt_level .GE.10) THEN
	4170	print *,' ->radlwsw, number 1 '
	4171	ENDIF
	4172	!
	4173	CALL radlwsw &
	4174	(dist, rmu0, fract, &
	4175	!albedo SB >>>
	4176	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4177	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4178	!albedo SB <<<
	4179	t_seri,q_seri,wo, &
	4180	cldfrarad, cldemirad, cldtaurad, &
[3479]	4181	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
	4182	flag_aerosol, &
[3412]	4183	flag_aerosol_strat, flag_aer_feedback, &
[2469]	4184	tau_aero, piz_aero, cg_aero, &
	4185	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4186	! Rajoute par OB pour RRTM
	4187	tau_aero_lw_rrtm, &
[3630]	4188	cldtaupirad, &
[3048]	4189	! zqsat, flwcrad, fiwcrad, &
[2469]	4190	zqsat, flwc, fiwc, &
	4191	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4192	heat,heat0,cool,cool0,albpla, &
[3479]	4193	heat_volc,cool_volc, &
[3756]	4194	topsw,toplw,solsw,solswfdiff,sollw, &
[2469]	4195	sollwdown, &
	4196	topsw0,toplw0,solsw0,sollw0, &
[3106]	4197	lwdnc0, lwdn0, lwdn, lwupc0, lwup0, lwup, &
[3082]	4198	swdnc0, swdn0, swdn, swupc0, swup0, swup, &
[2469]	4199	topswad_aero, solswad_aero, &
	4200	topswai_aero, solswai_aero, &
	4201	topswad0_aero, solswad0_aero, &
	4202	topsw_aero, topsw0_aero, &
	4203	solsw_aero, solsw0_aero, &
	4204	topswcf_aero, solswcf_aero, &
	4205	!-C. Kleinschmitt for LW diagnostics
	4206	toplwad_aero, sollwad_aero,&
	4207	toplwai_aero, sollwai_aero, &
	4208	toplwad0_aero, sollwad0_aero,&
	4209	!-end
	4210	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4211	ZSWFT0_i, ZFSDN0, ZFSUP0)
[879]	4212
[3048]	4213	!lwoff=y, betalwoff=1. : offset LW CRE for radiation code and other
	4214	!schemes
	4215	toplw = toplw + betalwoff * (toplw0 - toplw)
	4216	sollw = sollw + betalwoff * (sollw0 - sollw)
	4217	lwdn = lwdn + betalwoff * (lwdn0 - lwdn)
	4218	lwup = lwup + betalwoff * (lwup0 - lwup)
	4219	sollwdown(:)= sollwdown(:) + betalwoff (-1.ZFLDN0(:,1) - &
	4220	sollwdown(:))
	4221	cool = cool + betalwoff * (cool0 - cool)
	4222
[2679]	4223	#ifndef CPP_XIOS
	4224	!--OB 30/05/2016 modified 21/10/2016
[2854]	4225	!--here we return swaero_diag and dryaod_diag to FALSE
[2529]	4226	!--and histdef will switch it back to TRUE if necessary
	4227	!--this is necessary to get the right swaero at first step
[2679]	4228	!--but only in the case of no XIOS as XIOS is covered elsewhere
[3082]	4229	IF (debut) swaerofree_diag = .FALSE.
[2529]	4230	IF (debut) swaero_diag = .FALSE.
[2854]	4231	IF (debut) dryaod_diag = .FALSE.
[2989]	4232	!--IM 15/09/2017 here we return ok_4xCO2atm to FALSE
	4233	!--as for swaero_diag, see above
	4234	IF (debut) ok_4xCO2atm = .FALSE.
[3149]	4235
[2469]	4236	!
	4237	!IM 2eme calcul radiatif pour le cas perturbe ou au moins un
	4238	!IM des taux doit etre different du taux actuel
	4239	!IM Par defaut on a les taux perturbes egaux aux taux actuels
	4240	!
[2989]	4241	IF (RCO2_per.NE.RCO2_act.OR. &
	4242	RCH4_per.NE.RCH4_act.OR. &
	4243	RN2O_per.NE.RN2O_act.OR. &
	4244	RCFC11_per.NE.RCFC11_act.OR. &
	4245	RCFC12_per.NE.RCFC12_act) ok_4xCO2atm =.TRUE.
[3149]	4246	#endif
[2989]	4247	!
[2692]	4248	IF (ok_4xCO2atm) THEN
[2469]	4249	!
	4250	RCO2 = RCO2_per
	4251	RCH4 = RCH4_per
	4252	RN2O = RN2O_per
	4253	RCFC11 = RCFC11_per
	4254	RCFC12 = RCFC12_per
	4255	!
	4256	IF (prt_level .GE.10) THEN
	4257	print *,' ->radlwsw, number 2 '
	4258	ENDIF
	4259	!
	4260	CALL radlwsw &
	4261	(dist, rmu0, fract, &
	4262	!albedo SB >>>
	4263	! paprs, pplay,zxtsol,albsol1, albsol2, &
	4264	paprs, pplay,zxtsol,SFRWL,albsol_dir, albsol_dif, &
	4265	!albedo SB <<<
	4266	t_seri,q_seri,wo, &
[2640]	4267	cldfrarad, cldemirad, cldtaurad, &
[3479]	4268	ok_ade.OR.flag_aerosol_strat.GT.0, ok_aie, ok_volcan, &
	4269	flag_aerosol, &
[3412]	4270	flag_aerosol_strat, flag_aer_feedback, &
[2469]	4271	tau_aero, piz_aero, cg_aero, &
	4272	tau_aero_sw_rrtm, piz_aero_sw_rrtm, cg_aero_sw_rrtm, &
	4273	! Rajoute par OB pour RRTM
	4274	tau_aero_lw_rrtm, &
[3630]	4275	cldtaupi, &
[3048]	4276	! zqsat, flwcrad, fiwcrad, &
[2469]	4277	zqsat, flwc, fiwc, &
	4278	ref_liq, ref_ice, ref_liq_pi, ref_ice_pi, &
	4279	heatp,heat0p,coolp,cool0p,albplap, &
[3479]	4280	heat_volc,cool_volc, &
[3756]	4281	topswp,toplwp,solswp,solswfdiffp,sollwp, &
[2469]	4282	sollwdownp, &
	4283	topsw0p,toplw0p,solsw0p,sollw0p, &
[3106]	4284	lwdnc0p, lwdn0p, lwdnp, lwupc0p, lwup0p, lwupp, &
[3082]	4285	swdnc0p, swdn0p, swdnp, swupc0p, swup0p, swupp, &
[2469]	4286	topswad_aerop, solswad_aerop, &
	4287	topswai_aerop, solswai_aerop, &
	4288	topswad0_aerop, solswad0_aerop, &
	4289	topsw_aerop, topsw0_aerop, &
	4290	solsw_aerop, solsw0_aerop, &
	4291	topswcf_aerop, solswcf_aerop, &
	4292	!-C. Kleinschmitt for LW diagnostics
	4293	toplwad_aerop, sollwad_aerop,&
	4294	toplwai_aerop, sollwai_aerop, &
	4295	toplwad0_aerop, sollwad0_aerop,&
	4296	!-end
	4297	ZLWFT0_i, ZFLDN0, ZFLUP0, &
[3117]	4298	ZSWFT0_i, ZFSDN0, ZFSUP0)
[3048]	4299	endif !ok_4xCO2atm
[2469]	4300	ENDIF ! aerosol_couple
	4301	itaprad = 0
	4302	!
	4303	! If Iflag_radia >=2, reset pertubed variables
	4304	!
	4305	IF (iflag_radia .ge. 2) THEN
	4306	zxtsol(:) = zsav_tsol (:)
	4307	ENDIF
	4308	ENDIF ! MOD(itaprad,radpas)
	4309	itaprad = itaprad + 1
[879]	4310
[2469]	4311	IF (iflag_radia.eq.0) THEN
	4312	IF (prt_level.ge.9) THEN
	4313	PRINT *,'--------------------------------------------------'
	4314	PRINT *,'>>>> ATTENTION rayonnement desactive pour ce cas'
	4315	PRINT *,'>>>> heat et cool mis a zero '
	4316	PRINT *,'--------------------------------------------------'
[2692]	4317	ENDIF
[2469]	4318	heat=0.
	4319	cool=0.
	4320	sollw=0. ! MPL 01032011
	4321	solsw=0.
	4322	radsol=0.
	4323	swup=0. ! MPL 27102011 pour les fichiers AMMA_profiles et AMMA_scalars
	4324	swup0=0.
	4325	lwup=0.
	4326	lwup0=0.
	4327	lwdn=0.
	4328	lwdn0=0.
[2692]	4329	ENDIF
[782]	4330
[2469]	4331	!
	4332	! Calculer radsol a l'exterieur de radlwsw
	4333	! pour prendre en compte le cycle diurne
	4334	! recode par Olivier Boucher en sept 2015
	4335	!
	4336	radsol=solsw*swradcorr+sollw
[2618]	4337
[2692]	4338	IF (ok_4xCO2atm) THEN
[2469]	4339	radsolp=solswp*swradcorr+sollwp
[2692]	4340	ENDIF
[2359]	4341
[2469]	4342	!
	4343	! Ajouter la tendance des rayonnements (tous les pas)
	4344	! avec une correction pour le cycle diurne dans le SW
	4345	!
[2359]	4346
[2469]	4347	DO k=1, klev
[3435]	4348	d_t_swr(:,k)=swradcorr(:)heat(:,k)phys_tstep/RDAY
	4349	d_t_sw0(:,k)=swradcorr(:)heat0(:,k)phys_tstep/RDAY
	4350	d_t_lwr(:,k)=-cool(:,k)*phys_tstep/RDAY
	4351	d_t_lw0(:,k)=-cool0(:,k)*phys_tstep/RDAY
[2469]	4352	ENDDO
[2194]	4353
[2812]	4354	CALL add_phys_tend(du0,dv0,d_t_swr,dq0,dql0,dqi0,paprs,'SW',abortphy,flag_inhib_tend,itap,0)
[3461]	4355	CALL prt_enerbil('SW',itap)
[2812]	4356	CALL add_phys_tend(du0,dv0,d_t_lwr,dq0,dql0,dqi0,paprs,'LW',abortphy,flag_inhib_tend,itap,0)
[3461]	4357	CALL prt_enerbil('LW',itap)
[1863]	4358
[2469]	4359	!
[2692]	4360	IF (mydebug) THEN
	4361	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4362	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4363	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4364	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4365	ENDIF
[1863]	4366
[2469]	4367	! Calculer l'hydrologie de la surface
	4368	!
	4369	! CALL hydrol(dtime,pctsrf,rain_fall, snow_fall, zxevap,
	4370	! . agesno, ftsol,fqsurf,fsnow, ruis)
	4371	!
[1001]	4372
[2469]	4373	!
	4374	! Calculer le bilan du sol et la derive de temperature (couplage)
	4375	!
	4376	DO i = 1, klon
	4377	! bils(i) = radsol(i) - sens(i) - evap(i)*RLVTT
	4378	! a la demande de JLD
	4379	bils(i) = radsol(i) - sens(i) + zxfluxlat(i)
	4380	ENDDO
	4381	!
	4382	!moddeblott(jan95)
	4383	! Appeler le programme de parametrisation de l'orographie
	4384	! a l'echelle sous-maille:
	4385	!
	4386	IF (prt_level .GE.10) THEN
	4387	print *,' call orography ? ', ok_orodr
	4388	ENDIF
	4389	!
	4390	IF (ok_orodr) THEN
	4391	!
	4392	! selection des points pour lesquels le shema est actif:
	4393	igwd=0
	4394	DO i=1,klon
	4395	itest(i)=0
	4396	! IF ((zstd(i).gt.10.0)) THEN
	4397	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
	4398	itest(i)=1
	4399	igwd=igwd+1
	4400	idx(igwd)=i
	4401	ENDIF
	4402	ENDDO
	4403	! igwdim=MAX(1,igwd)
	4404	!
	4405	IF (ok_strato) THEN
[1863]	4406
[3435]	4407	CALL drag_noro_strato(0,klon,klev,phys_tstep,paprs,pplay, &
[2469]	4408	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4409	igwd,idx,itest, &
	4410	t_seri, u_seri, v_seri, &
	4411	zulow, zvlow, zustrdr, zvstrdr, &
	4412	d_t_oro, d_u_oro, d_v_oro)
[1863]	4413
[2469]	4414	ELSE
[3435]	4415	CALL drag_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4416	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4417	igwd,idx,itest, &
	4418	t_seri, u_seri, v_seri, &
	4419	zulow, zvlow, zustrdr, zvstrdr, &
	4420	d_t_oro, d_u_oro, d_v_oro)
	4421	ENDIF
	4422	!
	4423	! ajout des tendances
	4424	!-----------------------------------------------------------------------
	4425	! ajout des tendances de la trainee de l'orographie
	4426	CALL add_phys_tend(d_u_oro,d_v_oro,d_t_oro,dq0,dql0,dqi0,paprs,'oro', &
[2812]	4427	abortphy,flag_inhib_tend,itap,0)
[3461]	4428	CALL prt_enerbil('oro',itap)
[2469]	4429	!----------------------------------------------------------------------
	4430	!
	4431	ENDIF ! fin de test sur ok_orodr
	4432	!
[2692]	4433	IF (mydebug) THEN
	4434	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4435	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4436	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4437	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4438	ENDIF
[1001]	4439
[2469]	4440	IF (ok_orolf) THEN
	4441	!
	4442	! selection des points pour lesquels le shema est actif:
	4443	igwd=0
	4444	DO i=1,klon
	4445	itest(i)=0
	4446	IF ((zpic(i)-zmea(i)).GT.100.) THEN
	4447	itest(i)=1
	4448	igwd=igwd+1
	4449	idx(igwd)=i
	4450	ENDIF
	4451	ENDDO
	4452	! igwdim=MAX(1,igwd)
	4453	!
	4454	IF (ok_strato) THEN
[1001]	4455
[3435]	4456	CALL lift_noro_strato(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4457	latitude_deg,zmea,zstd,zpic,zgam,zthe,zpic,zval, &
	4458	igwd,idx,itest, &
	4459	t_seri, u_seri, v_seri, &
	4460	zulow, zvlow, zustrli, zvstrli, &
	4461	d_t_lif, d_u_lif, d_v_lif )
[2333]	4462
[2469]	4463	ELSE
[3435]	4464	CALL lift_noro(klon,klev,phys_tstep,paprs,pplay, &
[2469]	4465	latitude_deg,zmea,zstd,zpic, &
	4466	itest, &
	4467	t_seri, u_seri, v_seri, &
	4468	zulow, zvlow, zustrli, zvstrli, &
	4469	d_t_lif, d_u_lif, d_v_lif)
	4470	ENDIF
[1638]	4471
[2469]	4472	! ajout des tendances de la portance de l'orographie
	4473	CALL add_phys_tend(d_u_lif, d_v_lif, d_t_lif, dq0, dql0, dqi0, paprs, &
[2812]	4474	'lif', abortphy,flag_inhib_tend,itap,0)
[3461]	4475	CALL prt_enerbil('lif',itap)
[2469]	4476	ENDIF ! fin de test sur ok_orolf
[1638]	4477
[2469]	4478	IF (ok_hines) then
	4479	! HINES GWD PARAMETRIZATION
	4480	east_gwstress=0.
	4481	west_gwstress=0.
	4482	du_gwd_hines=0.
	4483	dv_gwd_hines=0.
[3435]	4484	CALL hines_gwd(klon, klev, phys_tstep, paprs, pplay, latitude_deg, t_seri, &
[2469]	4485	u_seri, v_seri, zustr_gwd_hines, zvstr_gwd_hines, d_t_hin, &
	4486	du_gwd_hines, dv_gwd_hines)
	4487	zustr_gwd_hines=0.
	4488	zvstr_gwd_hines=0.
	4489	DO k = 1, klev
[3435]	4490	zustr_gwd_hines(:)=zustr_gwd_hines(:)+ du_gwd_hines(:, k)/phys_tstep &
[2469]	4491	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4492	zvstr_gwd_hines(:)=zvstr_gwd_hines(:)+ dv_gwd_hines(:, k)/phys_tstep &
[2469]	4493	* (paprs(:, k)-paprs(:, k+1))/rg
	4494	ENDDO
[1001]	4495
[2469]	4496	d_t_hin(:, :)=0.
	4497	CALL add_phys_tend(du_gwd_hines, dv_gwd_hines, d_t_hin, dq0, dql0, &
[2812]	4498	dqi0, paprs, 'hin', abortphy,flag_inhib_tend,itap,0)
[3461]	4499	CALL prt_enerbil('hin',itap)
[2469]	4500	ENDIF
[2333]	4501
[2469]	4502	IF (.not. ok_hines .and. ok_gwd_rando) then
[3435]	4503	! ym missing init for east_gwstress & west_gwstress -> added in phys_local_var_mod
	4504	CALL acama_GWD_rando(PHYS_TSTEP, pplay, latitude_deg, t_seri, u_seri, &
[2469]	4505	v_seri, rot, zustr_gwd_front, zvstr_gwd_front, du_gwd_front, &
	4506	dv_gwd_front, east_gwstress, west_gwstress)
	4507	zustr_gwd_front=0.
	4508	zvstr_gwd_front=0.
	4509	DO k = 1, klev
[3435]	4510	zustr_gwd_front(:)=zustr_gwd_front(:)+ du_gwd_front(:, k)/phys_tstep &
[2469]	4511	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4512	zvstr_gwd_front(:)=zvstr_gwd_front(:)+ dv_gwd_front(:, k)/phys_tstep &
[2469]	4513	* (paprs(:, k)-paprs(:, k+1))/rg
	4514	ENDDO
[644]	4515
[2469]	4516	CALL add_phys_tend(du_gwd_front, dv_gwd_front, dt0, dq0, dql0, dqi0, &
[2812]	4517	paprs, 'front_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4518	CALL prt_enerbil('front_gwd_rando',itap)
[2469]	4519	ENDIF
[1938]	4520
[2692]	4521	IF (ok_gwd_rando) THEN
[3435]	4522	CALL FLOTT_GWD_rando(PHYS_TSTEP, pplay, t_seri, u_seri, v_seri, &
[2469]	4523	rain_fall + snow_fall, zustr_gwd_rando, zvstr_gwd_rando, &
	4524	du_gwd_rando, dv_gwd_rando, east_gwstress, west_gwstress)
	4525	CALL add_phys_tend(du_gwd_rando, dv_gwd_rando, dt0, dq0, dql0, dqi0, &
[2812]	4526	paprs, 'flott_gwd_rando', abortphy,flag_inhib_tend,itap,0)
[3461]	4527	CALL prt_enerbil('flott_gwd_rando',itap)
[2469]	4528	zustr_gwd_rando=0.
	4529	zvstr_gwd_rando=0.
	4530	DO k = 1, klev
[3435]	4531	zustr_gwd_rando(:)=zustr_gwd_rando(:)+ du_gwd_rando(:, k)/phys_tstep &
[2469]	4532	* (paprs(:, k)-paprs(:, k+1))/rg
[3435]	4533	zvstr_gwd_rando(:)=zvstr_gwd_rando(:)+ dv_gwd_rando(:, k)/phys_tstep &
[2469]	4534	* (paprs(:, k)-paprs(:, k+1))/rg
	4535	ENDDO
[2692]	4536	ENDIF
[766]	4537
[2469]	4538	! STRESS NECESSAIRES: TOUTE LA PHYSIQUE
[1279]	4539
[2692]	4540	IF (mydebug) THEN
	4541	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4542	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4543	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4544	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4545	ENDIF
[2136]	4546
[2469]	4547	DO i = 1, klon
	4548	zustrph(i)=0.
	4549	zvstrph(i)=0.
	4550	ENDDO
	4551	DO k = 1, klev
	4552	DO i = 1, klon
[3435]	4553	zustrph(i)=zustrph(i)+(u_seri(i,k)-u(i,k))/phys_tstep* &
[2469]	4554	(paprs(i,k)-paprs(i,k+1))/rg
[3435]	4555	zvstrph(i)=zvstrph(i)+(v_seri(i,k)-v(i,k))/phys_tstep* &
[2469]	4556	(paprs(i,k)-paprs(i,k+1))/rg
	4557	ENDDO
	4558	ENDDO
	4559	!
	4560	!IM calcul composantes axiales du moment angulaire et couple des montagnes
	4561	!
	4562	IF (is_sequential .and. ok_orodr) THEN
	4563	CALL aaam_bud (27,klon,klev,jD_cur-jD_ref,jH_cur, &
	4564	ra,rg,romega, &
	4565	latitude_deg,longitude_deg,pphis, &
	4566	zustrdr,zustrli,zustrph, &
	4567	zvstrdr,zvstrli,zvstrph, &
	4568	paprs,u,v, &
	4569	aam, torsfc)
	4570	ENDIF
	4571	!IM cf. FLott END
	4572	!DC Calcul de la tendance due au methane
[3461]	4573	IF (ok_qch4) THEN
[2469]	4574	CALL METHOX(1,klon,klon,klev,q_seri,d_q_ch4,pplay)
	4575	! ajout de la tendance d'humidite due au methane
[3435]	4576	d_q_ch4_dtime(:,:) = d_q_ch4(:,:)*phys_tstep
[2801]	4577	CALL add_phys_tend(du0, dv0, dt0, d_q_ch4_dtime, dql0, dqi0, paprs, &
[2812]	4578	'q_ch4', abortphy,flag_inhib_tend,itap,0)
[3435]	4579	d_q_ch4(:,:) = d_q_ch4_dtime(:,:)/phys_tstep
[2692]	4580	ENDIF
[2469]	4581	!
	4582	!
[2897]	4583
	4584	!===============================================================
	4585	! Additional tendency of TKE due to orography
	4586	!===============================================================
	4587	!
	4588	! Inititialization
	4589	!------------------
	4590
	4591	addtkeoro=0
	4592	CALL getin_p('addtkeoro',addtkeoro)
	4593
	4594	IF (prt_level.ge.5) &
	4595	print*,'addtkeoro', addtkeoro
	4596
	4597	alphatkeoro=1.
	4598	CALL getin_p('alphatkeoro',alphatkeoro)
	4599	alphatkeoro=min(max(0.,alphatkeoro),1.)
	4600
[3461]	4601	smallscales_tkeoro=.FALSE.
[2897]	4602	CALL getin_p('smallscales_tkeoro',smallscales_tkeoro)
	4603
	4604
[3461]	4605	dtadd(:,:)=0.
	4606	duadd(:,:)=0.
	4607	dvadd(:,:)=0.
[2897]	4608
	4609	! Choices for addtkeoro:
	4610	! ** 0 no TKE tendency from orography
	4611	! ** 1 we include a fraction alphatkeoro of the whole tendency duoro
	4612	! ** 2 we include a fraction alphatkeoro of the gravity wave part of duoro
	4613	!
	4614
	4615	IF (addtkeoro .GT. 0 .AND. ok_orodr ) THEN
	4616	! -------------------------------------------
	4617
	4618
	4619	! selection des points pour lesquels le schema est actif:
	4620
	4621
	4622	IF (addtkeoro .EQ. 1 ) THEN
	4623
	4624	duadd(:,:)=alphatkeoro*d_u_oro(:,:)
	4625	dvadd(:,:)=alphatkeoro*d_v_oro(:,:)
	4626
	4627	ELSE IF (addtkeoro .EQ. 2) THEN
	4628
[3461]	4629	IF (smallscales_tkeoro) THEN
[2897]	4630	igwd=0
	4631	DO i=1,klon
	4632	itest(i)=0
	4633	! Etienne: ici je prends en compte plus de relief que la routine drag_noro_strato
	4634	! car on peut s'attendre a ce que les petites echelles produisent aussi de la TKE
	4635	! Mais attention, cela ne va pas dans le sens de la conservation de l'energie!
	4636	IF (zstd(i).GT.1.0) THEN
	4637	itest(i)=1
	4638	igwd=igwd+1
	4639	idx(igwd)=i
	4640	ENDIF
	4641	ENDDO
	4642
	4643	ELSE
	4644
	4645	igwd=0
	4646	DO i=1,klon
	4647	itest(i)=0
	4648	IF (((zpic(i)-zmea(i)).GT.100.).AND.(zstd(i).GT.10.0)) THEN
	4649	itest(i)=1
	4650	igwd=igwd+1
	4651	idx(igwd)=i
[3461]	4652	ENDIF
[2897]	4653	ENDDO
	4654
[3461]	4655	ENDIF
[2897]	4656
[3461]	4657	CALL drag_noro_strato(addtkeoro,klon,klev,phys_tstep,paprs,pplay, &
[2897]	4658	zmea,zstd, zsig, zgam, zthe,zpic,zval, &
	4659	igwd,idx,itest, &
	4660	t_seri, u_seri, v_seri, &
	4661	zulow, zvlow, zustrdr, zvstrdr, &
	4662	d_t_oro_gw, d_u_oro_gw, d_v_oro_gw)
	4663
[3461]	4664	zustrdr(:)=0.
	4665	zvstrdr(:)=0.
	4666	zulow(:)=0.
	4667	zvlow(:)=0.
[2897]	4668
[3461]	4669	duadd(:,:)=alphatkeoro*d_u_oro_gw(:,:)
	4670	dvadd(:,:)=alphatkeoro*d_v_oro_gw(:,:)
	4671	ENDIF
[2897]	4672
	4673
	4674	! TKE update from subgrid temperature and wind tendencies
	4675	!----------------------------------------------------------
	4676	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
	4677
	4678
[3198]	4679	CALL tend_to_tke(pdtphys,paprs,exner,t_seri,u_seri,v_seri,dtadd,duadd,dvadd,pctsrf,pbl_tke)
[2897]	4680
	4681
	4682	ENDIF
	4683	! -----
	4684	!===============================================================
	4685
	4686
[2469]	4687	!====================================================================
	4688	! Interface Simulateur COSP (Calipso, ISCCP, MISR, ..)
	4689	!====================================================================
	4690	! Abderrahmane 24.08.09
	4691
	4692	IF (ok_cosp) THEN
	4693	! adeclarer
[1279]	4694	#ifdef CPP_COSP
[3435]	4695	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[1279]	4696
[2469]	4697	IF (prt_level .GE.10) THEN
	4698	print*,'freq_cosp',freq_cosp
	4699	ENDIF
	4700	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4701	! print*,'Dans physiq.F avant appel cosp ref_liq,ref_ice=',
	4702	! s ref_liq,ref_ice
[3435]	4703	CALL phys_cosp(itap,phys_tstep,freq_cosp, &
[2469]	4704	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
[2794]	4705	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
[2469]	4706	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4707	JrNt,ref_liq,ref_ice, &
	4708	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4709	zu10m,zv10m,pphis, &
	4710	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4711	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4712	prfl(:,1:klev),psfl(:,1:klev), &
	4713	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4714	mr_ozone,cldtau, cldemi)
[1412]	4715
[2469]	4716	! L calipso2D,calipso3D,cfadlidar,parasolrefl,atb,betamol,
	4717	! L cfaddbze,clcalipso2,dbze,cltlidarradar,
	4718	! M clMISR,
	4719	! R clisccp2,boxtauisccp,boxptopisccp,tclisccp,ctpisccp,
	4720	! I tauisccp,albisccp,meantbisccp,meantbclrisccp)
[1279]	4721
[2469]	4722	ENDIF
[3370]	4723	#endif
[1279]	4724
[3370]	4725	#ifdef CPP_COSP2
[3435]	4726	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3370]	4727
	4728	IF (prt_level .GE.10) THEN
	4729	print*,'freq_cosp',freq_cosp
	4730	ENDIF
	4731	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4732	print*,'Dans physiq.F avant appel '
	4733	! s ref_liq,ref_ice
[3435]	4734	CALL phys_cosp2(itap,phys_tstep,freq_cosp, &
[3370]	4735	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4736	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4737	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4738	JrNt,ref_liq,ref_ice, &
	4739	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4740	zu10m,zv10m,pphis, &
	4741	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4742	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4743	prfl(:,1:klev),psfl(:,1:klev), &
	4744	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4745	mr_ozone,cldtau, cldemi)
	4746	ENDIF
[1279]	4747	#endif
[3370]	4748
[3491]	4749	#ifdef CPP_COSPV2
	4750	IF (itap.eq.1.or.MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3726]	4751	! IF (MOD(itap,NINT(freq_cosp/phys_tstep)).EQ.0) THEN
[3491]	4752
	4753	IF (prt_level .GE.10) THEN
	4754	print*,'freq_cosp',freq_cosp
	4755	ENDIF
[3726]	4756	DO k = 1, klev
	4757	DO i = 1, klon
	4758	phicosp(i,k) = pphi(i,k) + pphis(i)
	4759	ENDDO
	4760	ENDDO
[3491]	4761	mr_ozone=wo(:, :, 1) * dobson_u * 1e3 / zmasse
	4762	print*,'Dans physiq.F avant appel '
	4763	! s ref_liq,ref_ice
	4764	CALL lmdz_cosp_interface(itap,phys_tstep,freq_cosp, &
	4765	ok_mensuelCOSP,ok_journeCOSP,ok_hfCOSP, &
	4766	ecrit_mth,ecrit_day,ecrit_hf, ok_all_xml, missing_val, &
	4767	klon,klev,longitude_deg,latitude_deg,presnivs,overlap, &
	4768	JrNt,ref_liq,ref_ice, &
	4769	pctsrf(:,is_ter)+pctsrf(:,is_lic), &
	4770	zu10m,zv10m,pphis, &
	4771	zphi,paprs(:,1:klev),pplay,zxtsol,t_seri, &
	4772	qx(:,:,ivap),zx_rh,cldfra,rnebcon,flwc,fiwc, &
	4773	prfl(:,1:klev),psfl(:,1:klev), &
	4774	pmflxr(:,1:klev),pmflxs(:,1:klev), &
	4775	mr_ozone,cldtau, cldemi)
	4776	ENDIF
	4777	#endif
	4778
[2469]	4779	ENDIF !ok_cosp
[2580]	4780
	4781
	4782	! Marine
	4783
	4784	IF (ok_airs) then
	4785
[3435]	4786	IF (itap.eq.1.or.MOD(itap,NINT(freq_airs/phys_tstep)).EQ.0) THEN
[2692]	4787	write(,) 'je vais appeler simu_airs, ok_airs, freq_airs=', ok_airs, freq_airs
	4788	CALL simu_airs(itap,rneb, t_seri, cldemi, fiwc, ref_ice, pphi, pplay, paprs,&
	4789	& map_prop_hc,map_prop_hist,&
	4790	& map_emis_hc,map_iwp_hc,map_deltaz_hc,map_pcld_hc,map_tcld_hc,&
	4791	& map_emis_Cb,map_pcld_Cb,map_tcld_Cb,&
	4792	& map_emis_ThCi,map_pcld_ThCi,map_tcld_ThCi,&
	4793	& map_emis_Anv,map_pcld_Anv,map_tcld_Anv,&
	4794	& map_emis_hist,map_iwp_hist,map_deltaz_hist,map_rad_hist,&
	4795	& map_ntot,map_hc,map_hist,&
	4796	& map_Cb,map_ThCi,map_Anv,&
	4797	& alt_tropo )
[2580]	4798	ENDIF
	4799
	4800	ENDIF ! ok_airs
	4801
	4802
[2469]	4803	! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	4804	!AA
	4805	!AA Installation de l'interface online-offline pour traceurs
	4806	!AA
	4807	!====================================================================
	4808	! Calcul des tendances traceurs
	4809	!====================================================================
	4810	!
[959]	4811
[2469]	4812	IF (type_trac=='repr') THEN
[3666]	4813	!MM pas d'impact, car on recupere q_seri,tr_seri,t_seri via phys_local_var_mod
	4814	!MM dans Reprobus
[2469]	4815	sh_in(:,:) = q_seri(:,:)
[3666]	4816	#ifdef REPROBUS
	4817	d_q_rep(:,:) = 0.
	4818	d_ql_rep(:,:) = 0.
	4819	d_qi_rep(:,:) = 0.
	4820	#endif
[2469]	4821	ELSE
	4822	sh_in(:,:) = qx(:,:,ivap)
[2784]	4823	ch_in(:,:) = qx(:,:,iliq)
[2692]	4824	ENDIF
[1565]	4825
[2630]	4826	#ifdef CPP_Dust
[3776]	4827	! Avec SPLA, iflag_phytrac est forcé =1
	4828	CALL phytracr_spl ( debut,lafin , jD_cur,jH_cur,iflag_con, & ! I
[2630]	4829	pdtphys,ftsol, & ! I
	4830	t,q_seri,paprs,pplay,RHcl, & ! I
	4831	pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, & ! I
	4832	coefh(1:klon,1:klev,is_ave), cdragh, cdragm, u1, v1, & ! I
	4833	u_seri, v_seri, latitude_deg, longitude_deg, &
	4834	pphis,pctsrf,pmflxr,pmflxs,prfl,psfl, & ! I
	4835	da,phi,phi2,d1a,dam,mp,ep,sigd,sij,clw,elij, & ! I
	4836	epmlmMm,eplaMm,upwd,dnwd,itop_con,ibas_con, & ! I
	4837	ev,wdtrainA, wdtrainM,wght_cvfd, & ! I
	4838	fm_therm, entr_therm, rneb, & ! I
	4839	beta_prec_fisrt,beta_prec, & !I
	4840	zu10m,zv10m,wstar,ale_bl,ale_wake, & ! I
	4841	d_tr_dyn,tr_seri)
	4842
	4843	#else
[3776]	4844	IF (iflag_phytrac == 1 ) THEN
	4845	CALL phytrac ( &
[2469]	4846	itap, days_elapsed+1, jH_cur, debut, &
[3435]	4847	lafin, phys_tstep, u, v, t, &
[2469]	4848	paprs, pplay, pmfu, pmfd, &
	4849	pen_u, pde_u, pen_d, pde_d, &
	4850	cdragh, coefh(1:klon,1:klev,is_ave), fm_therm, entr_therm, &
	4851	u1, v1, ftsol, pctsrf, &
	4852	zustar, zu10m, zv10m, &
	4853	wstar(:,is_ave), ale_bl, ale_wake, &
	4854	latitude_deg, longitude_deg, &
	4855	frac_impa,frac_nucl, beta_prec_fisrt,beta_prec, &
	4856	presnivs, pphis, pphi, albsol1, &
[2784]	4857	sh_in, ch_in, rhcl, cldfra, rneb, &
[2469]	4858	diafra, cldliq, itop_con, ibas_con, &
	4859	pmflxr, pmflxs, prfl, psfl, &
	4860	da, phi, mp, upwd, &
	4861	phi2, d1a, dam, sij, wght_cvfd, & !<<RomP+RL
	4862	wdtrainA, wdtrainM, sigd, clw,elij, & !<<RomP
	4863	ev, ep, epmlmMm, eplaMm, & !<<RomP
	4864	dnwd, aerosol_couple, flxmass_w, &
	4865	tau_aero, piz_aero, cg_aero, ccm, &
	4866	rfname, &
	4867	d_tr_dyn, & !<<RomP
[3418]	4868	tr_seri, init_source)
[3666]	4869	#ifdef REPROBUS
	4870
	4871
	4872	print*,'avt add phys rep',abortphy
	4873
	4874	CALL add_phys_tend &
	4875	(du0,dv0,dt0,d_q_rep,d_ql_rep,d_qi_rep,paprs,&
	4876	'rep',abortphy,flag_inhib_tend,itap,0)
	4877	IF (abortphy==1) Print*,'ERROR ABORT REP'
	4878
	4879	print*,'apr add phys rep',abortphy
	4880
[2630]	4881	#endif
[3776]	4882	ENDIF ! (iflag_phytrac=1)
[3666]	4883
	4884	#endif
[3776]	4885	!ENDIF ! (iflag_phytrac=1)
[524]	4886
[2469]	4887	IF (offline) THEN
[524]	4888
[2469]	4889	IF (prt_level.ge.9) &
	4890	print*,'Attention on met a 0 les thermiques pour phystoke'
[2692]	4891	CALL phystokenc ( &
[2469]	4892	nlon,klev,pdtphys,longitude_deg,latitude_deg, &
	4893	t,pmfu, pmfd, pen_u, pde_u, pen_d, pde_d, &
	4894	fm_therm,entr_therm, &
	4895	cdragh,coefh(1:klon,1:klev,is_ave),u1,v1,ftsol,pctsrf, &
	4896	frac_impa, frac_nucl, &
[3435]	4897	pphis,cell_area,phys_tstep,itap, &
[2469]	4898	qx(:,:,ivap),da,phi,mp,upwd,dnwd)
[524]	4899
	4900
[2469]	4901	ENDIF
[524]	4902
[2469]	4903	!
	4904	! Calculer le transport de l'eau et de l'energie (diagnostique)
	4905	!
	4906	CALL transp (paprs,zxtsol, &
[3257]	4907	t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zphi, &
	4908	ve, vq, ue, uq, vwat, uwat)
[2469]	4909	!
	4910	!IM global posePB BEG
	4911	IF(1.EQ.0) THEN
	4912	!
	4913	CALL transp_lay (paprs,zxtsol, &
	4914	t_seri, q_seri, u_seri, v_seri, zphi, &
	4915	ve_lay, vq_lay, ue_lay, uq_lay)
	4916	!
	4917	ENDIF !(1.EQ.0) THEN
	4918	!IM global posePB END
	4919	! Accumuler les variables a stocker dans les fichiers histoire:
	4920	!
[1279]	4921
[2469]	4922	!================================================================
	4923	! Conversion of kinetic and potential energy into heat, for
	4924	! parameterisation of subgrid-scale motions
	4925	!================================================================
[1753]	4926
[2469]	4927	d_t_ec(:,:)=0.
	4928	forall (k=1: nbp_lev) exner(:, k) = (pplay(:, k)/paprs(:,1))**RKAPPA
[2851]	4929	CALL ener_conserv(klon,klev,pdtphys,u,v,t,qx(:,:,ivap),qx(:,:,iliq),qx(:,:,isol), &
	4930	u_seri,v_seri,t_seri,q_seri,ql_seri,qs_seri,pbl_tke(:,:,is_ave)-tke0(:,:), &
[2469]	4931	zmasse,exner,d_t_ec)
	4932	t_seri(:,:)=t_seri(:,:)+d_t_ec(:,:)
[1753]	4933
[2469]	4934	!=======================================================================
	4935	! SORTIES
	4936	!=======================================================================
	4937	!
	4938	!IM initialisation + calculs divers diag AMIP2
	4939	!
	4940	include "calcul_divers.h"
	4941	!
	4942	!IM Interpolation sur les niveaux de pression du NMC
	4943	! -------------------------------------------------
	4944	!
	4945	include "calcul_STDlev.h"
	4946	!
	4947	! slp sea level pressure derived from Arpege-IFS : CALL ctstar + CALL pppmer
	4948	CALL diag_slp(klon,t_seri,paprs,pplay,pphis,ptstar,pt0,slp)
	4949	!
[2496]	4950	!cc prw = eau precipitable
	4951	! prlw = colonne eau liquide
	4952	! prlw = colonne eau solide
[2499]	4953	prw(:) = 0.
	4954	prlw(:) = 0.
	4955	prsw(:) = 0.
	4956	DO k = 1, klev
	4957	prw(:) = prw(:) + q_seri(:,k)*zmasse(:,k)
	4958	prlw(:) = prlw(:) + ql_seri(:,k)*zmasse(:,k)
	4959	prsw(:) = prsw(:) + qs_seri(:,k)*zmasse(:,k)
[2469]	4960	ENDDO
	4961	!
	4962	IF (type_trac == 'inca') THEN
[655]	4963	#ifdef INCA
[2469]	4964	CALL VTe(VTphysiq)
	4965	CALL VTb(VTinca)
[959]	4966
[2469]	4967	CALL chemhook_end ( &
[3435]	4968	phys_tstep, &
[2469]	4969	pplay, &
	4970	t_seri, &
	4971	tr_seri, &
	4972	nbtr, &
	4973	paprs, &
	4974	q_seri, &
	4975	cell_area, &
	4976	pphi, &
	4977	pphis, &
[2832]	4978	zx_rh, &
[3871]	4979	aps, bps, ap, bp, lafin)
[959]	4980
[2469]	4981	CALL VTe(VTinca)
	4982	CALL VTb(VTphysiq)
[655]	4983	#endif
[2692]	4984	ENDIF
[655]	4985
[1753]	4986
[2469]	4987	!
	4988	! Convertir les incrementations en tendances
	4989	!
	4990	IF (prt_level .GE.10) THEN
	4991	print *,'Convertir les incrementations en tendances '
	4992	ENDIF
	4993	!
[2692]	4994	IF (mydebug) THEN
	4995	CALL writefield_phy('u_seri',u_seri,nbp_lev)
	4996	CALL writefield_phy('v_seri',v_seri,nbp_lev)
	4997	CALL writefield_phy('t_seri',t_seri,nbp_lev)
	4998	CALL writefield_phy('q_seri',q_seri,nbp_lev)
	4999	ENDIF
[766]	5000
[2469]	5001	DO k = 1, klev
	5002	DO i = 1, klon
[3435]	5003	d_u(i,k) = ( u_seri(i,k) - u(i,k) ) / phys_tstep
	5004	d_v(i,k) = ( v_seri(i,k) - v(i,k) ) / phys_tstep
	5005	d_t(i,k) = ( t_seri(i,k)-t(i,k) ) / phys_tstep
	5006	d_qx(i,k,ivap) = ( q_seri(i,k) - qx(i,k,ivap) ) / phys_tstep
	5007	d_qx(i,k,iliq) = ( ql_seri(i,k) - qx(i,k,iliq) ) / phys_tstep
[2469]	5008	!CR: on ajoute le contenu en glace
[2692]	5009	IF (nqo.eq.3) THEN
[3435]	5010	d_qx(i,k,isol) = ( qs_seri(i,k) - qx(i,k,isol) ) / phys_tstep
[2692]	5011	ENDIF
[2469]	5012	ENDDO
	5013	ENDDO
	5014	!
	5015	!CR: nb de traceurs eau: nqo
	5016	! IF (nqtot.GE.3) THEN
	5017	IF (nqtot.GE.(nqo+1)) THEN
	5018	! DO iq = 3, nqtot
	5019	DO iq = nqo+1, nqtot
	5020	DO k = 1, klev
	5021	DO i = 1, klon
[3435]	5022	! d_qx(i,k,iq) = ( tr_seri(i,k,iq-2) - qx(i,k,iq) ) / phys_tstep
	5023	d_qx(i,k,iq) = ( tr_seri(i,k,iq-nqo) - qx(i,k,iq) ) / phys_tstep
[2469]	5024	ENDDO
	5025	ENDDO
	5026	ENDDO
	5027	ENDIF
	5028	!
	5029	!IM rajout diagnostiques bilan KP pour analyse MJO par Jun-Ichi Yano
	5030	!IM global posePB include "write_bilKP_ins.h"
	5031	!IM global posePB include "write_bilKP_ave.h"
	5032	!
[1412]	5033
[2489]	5034	!--OB mass fixer
	5035	!--profile is corrected to force mass conservation of water
	5036	IF (mass_fixer) THEN
	5037	qql2(:)=0.0
[2499]	5038	DO k = 1, klev
	5039	qql2(:)=qql2(:)+(q_seri(:,k)+ql_seri(:,k)+qs_seri(:,k))*zmasse(:,k)
[2489]	5040	ENDDO
	5041	DO i = 1, klon
	5042	!--compute ratio of what q+ql should be with conservation to what it is
	5043	corrqql=(qql1(i)+(evap(i)-rain_fall(i)-snow_fall(i))*pdtphys)/qql2(i)
	5044	DO k = 1, klev
	5045	q_seri(i,k) =q_seri(i,k)*corrqql
	5046	ql_seri(i,k)=ql_seri(i,k)*corrqql
	5047	ENDDO
	5048	ENDDO
	5049	ENDIF
	5050	!--fin mass fixer
	5051
[2469]	5052	! Sauvegarder les valeurs de t et q a la fin de la physique:
	5053	!
[2499]	5054	u_ancien(:,:) = u_seri(:,:)
	5055	v_ancien(:,:) = v_seri(:,:)
	5056	t_ancien(:,:) = t_seri(:,:)
	5057	q_ancien(:,:) = q_seri(:,:)
	5058	ql_ancien(:,:) = ql_seri(:,:)
	5059	qs_ancien(:,:) = qs_seri(:,:)
	5060	CALL water_int(klon,klev,q_ancien,zmasse,prw_ancien)
	5061	CALL water_int(klon,klev,ql_ancien,zmasse,prlw_ancien)
	5062	CALL water_int(klon,klev,qs_ancien,zmasse,prsw_ancien)
[2469]	5063	! !! RomP >>>
	5064	!CR: nb de traceurs eau: nqo
[2499]	5065	IF (nqtot.GT.nqo) THEN
[2469]	5066	DO iq = nqo+1, nqtot
[2499]	5067	tr_ancien(:,:,iq-nqo) = tr_seri(:,:,iq-nqo)
[2469]	5068	ENDDO
	5069	ENDIF
	5070	! !! RomP <<<
	5071	!==========================================================================
	5072	! Sorties des tendances pour un point particulier
	5073	! a utiliser en 1D, avec igout=1 ou en 3D sur un point particulier
	5074	! pour le debug
	5075	! La valeur de igout est attribuee plus haut dans le programme
	5076	!==========================================================================
[879]	5077
[2692]	5078	IF (prt_level.ge.1) THEN
[2469]	5079	write(lunout,*) 'FIN DE PHYSIQ !!!!!!!!!!!!!!!!!!!!'
	5080	write(lunout,*) &
	5081	'nlon,klev,nqtot,debut,lafin,jD_cur, jH_cur, pdtphys pct tlos'
	5082	write(lunout,*) &
	5083	nlon,klev,nqtot,debut,lafin, jD_cur, jH_cur ,pdtphys, &
	5084	pctsrf(igout,is_ter), pctsrf(igout,is_lic),pctsrf(igout,is_oce), &
	5085	pctsrf(igout,is_sic)
	5086	write(lunout,*) 'd_t_dyn,d_t_con,d_t_lsc,d_t_ajsb,d_t_ajs,d_t_eva'
[2692]	5087	DO k=1,klev
[2469]	5088	write(lunout,*) d_t_dyn(igout,k),d_t_con(igout,k), &
	5089	d_t_lsc(igout,k),d_t_ajsb(igout,k),d_t_ajs(igout,k), &
	5090	d_t_eva(igout,k)
[2692]	5091	ENDDO
[2469]	5092	write(lunout,*) 'cool,heat'
[2692]	5093	DO k=1,klev
[2469]	5094	write(lunout,*) cool(igout,k),heat(igout,k)
[2692]	5095	ENDDO
[879]	5096
[2469]	5097	!jyg< (En attendant de statuer sur le sort de d_t_oli)
	5098	!jyg! write(lunout,*) 'd_t_oli,d_t_vdf,d_t_oro,d_t_lif,d_t_ec'
	5099	!jyg! do k=1,klev
	5100	!jyg! write(lunout,*) d_t_oli(igout,k),d_t_vdf(igout,k), &
	5101	!jyg! d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
	5102	!jyg! enddo
	5103	write(lunout,*) 'd_t_vdf,d_t_oro,d_t_lif,d_t_ec'
[2692]	5104	DO k=1,klev
[2469]	5105	write(lunout,*) d_t_vdf(igout,k), &
	5106	d_t_oro(igout,k),d_t_lif(igout,k),d_t_ec(igout,k)
[2692]	5107	ENDDO
[2469]	5108	!>jyg
[879]	5109
[2469]	5110	write(lunout,*) 'd_ps ',d_ps(igout)
	5111	write(lunout,*) 'd_u, d_v, d_t, d_qx1, d_qx2 '
[2692]	5112	DO k=1,klev
[2469]	5113	write(lunout,*) d_u(igout,k),d_v(igout,k),d_t(igout,k), &
	5114	d_qx(igout,k,1),d_qx(igout,k,2)
[2692]	5115	ENDDO
	5116	ENDIF
[879]	5117
[2469]	5118	!============================================================
	5119	! Calcul de la temperature potentielle
	5120	!============================================================
	5121	DO k = 1, klev
	5122	DO i = 1, klon
	5123	!JYG/IM theta en debut du pas de temps
	5124	!JYG/IM theta(i,k)=t(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5125	!JYG/IM theta en fin de pas de temps de physique
	5126	theta(i,k)=t_seri(i,k)(100000./pplay(i,k))*(RD/RCPD)
	5127	! thetal: 2 lignes suivantes a decommenter si vous avez les fichiers
	5128	! MPL 20130625
	5129	! fth_fonctions.F90 et parkind1.F90
	5130	! sinon thetal=theta
	5131	! thetal(i,k)=fth_thetal(pplay(i,k),t_seri(i,k),q_seri(i,k),
	5132	! : ql_seri(i,k))
	5133	thetal(i,k)=theta(i,k)
	5134	ENDDO
	5135	ENDDO
	5136	!
[879]	5137
[2469]	5138	! 22.03.04 BEG
	5139	!=============================================================
	5140	! Ecriture des sorties
	5141	!=============================================================
[524]	5142	#ifdef CPP_IOIPSL
	5143
[2469]	5144	! Recupere des varibles calcule dans differents modules
	5145	! pour ecriture dans histxxx.nc
[782]	5146
[2469]	5147	! Get some variables from module fonte_neige_mod
	5148	CALL fonte_neige_get_vars(pctsrf, &
[2517]	5149	zxfqcalving, zxfqfonte, zxffonte, zxrunofflic)
[782]	5150
[1507]	5151
[2469]	5152	!=============================================================
	5153	! Separation entre thermiques et non thermiques dans les sorties
	5154	! de fisrtilp
	5155	!=============================================================
[1507]	5156
[2692]	5157	IF (iflag_thermals>=1) THEN
[2469]	5158	d_t_lscth=0.
	5159	d_t_lscst=0.
	5160	d_q_lscth=0.
	5161	d_q_lscst=0.
[2692]	5162	DO k=1,klev
	5163	DO i=1,klon
	5164	IF (ptconvth(i,k)) THEN
[2469]	5165	d_t_lscth(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5166	d_q_lscth(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5167	ELSE
[2469]	5168	d_t_lscst(i,k)=d_t_eva(i,k)+d_t_lsc(i,k)
	5169	d_q_lscst(i,k)=d_q_eva(i,k)+d_q_lsc(i,k)
[2692]	5170	ENDIF
	5171	ENDDO
	5172	ENDDO
[1507]	5173
[2692]	5174	DO i=1,klon
[2469]	5175	plul_st(i)=prfl(i,lmax_th(i)+1)+psfl(i,lmax_th(i)+1)
	5176	plul_th(i)=prfl(i,1)+psfl(i,1)
[2692]	5177	ENDDO
	5178	ENDIF
[909]	5179
[2469]	5180	!On effectue les sorties:
[1791]	5181
[2630]	5182	#ifdef CPP_Dust
	5183	CALL phys_output_write_spl(itap, pdtphys, paprs, pphis, &
	5184	pplay, lmax_th, aerosol_couple, &
[3776]	5185	ok_ade, ok_aie, ivap, ok_sync, &
[2630]	5186	ptconv, read_climoz, clevSTD, &
	5187	ptconvth, d_t, qx, d_qx, d_tr_dyn, zmasse, &
	5188	flag_aerosol, flag_aerosol_strat, ok_cdnc)
	5189	#else
[2469]	5190	CALL phys_output_write(itap, pdtphys, paprs, pphis, &
	5191	pplay, lmax_th, aerosol_couple, &
[3630]	5192	ok_ade, ok_aie, ok_volcan, ivap, iliq, isol, &
[2496]	5193	ok_sync, ptconv, read_climoz, clevSTD, &
[2665]	5194	ptconvth, d_u, d_t, qx, d_qx, zmasse, &
[2469]	5195	flag_aerosol, flag_aerosol_strat, ok_cdnc)
[2630]	5196	#endif
[1791]	5197
[2651]	5198	#ifndef CPP_XIOS
[2590]	5199	CALL write_paramLMDZ_phy(itap,nid_ctesGCM,ok_sync)
[2651]	5200	#endif
[687]	5201
[524]	5202	#endif
	5203
[3776]	5204	! Pour XIOS : On remet des variables a .false. apres un premier appel
[3461]	5205	IF (debut) THEN
[3239]	5206	#ifdef CPP_XIOS
	5207	swaero_diag=.FALSE.
	5208	swaerofree_diag=.FALSE.
	5209	dryaod_diag=.FALSE.
	5210	ok_4xCO2atm= .FALSE.
[3258]	5211	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
[2235]	5212
[3461]	5213	IF (is_master) THEN
[3258]	5214	!--setting up swaero_diag to TRUE in XIOS case
	5215	IF (xios_field_is_active("topswad").OR.xios_field_is_active("topswad0").OR. &
[3239]	5216	xios_field_is_active("solswad").OR.xios_field_is_active("solswad0").OR. &
	5217	xios_field_is_active("topswai").OR.xios_field_is_active("solswai").OR. &
	5218	(iflag_rrtm==1.AND.(xios_field_is_active("toplwad").OR.xios_field_is_active("toplwad0").OR. &
	5219	xios_field_is_active("sollwad").OR.xios_field_is_active("sollwad0")))) &
	5220	!!!--for now these fields are not in the XML files so they are omitted
	5221	!!! xios_field_is_active("toplwai").OR.xios_field_is_active("sollwai") !))) &
	5222	swaero_diag=.TRUE.
	5223
[3258]	5224	!--setting up swaerofree_diag to TRUE in XIOS case
	5225	IF (xios_field_is_active("SWdnSFCcleanclr").OR.xios_field_is_active("SWupSFCcleanclr").OR. &
[3239]	5226	xios_field_is_active("SWupTOAcleanclr").OR.xios_field_is_active("rsucsaf").OR. &
	5227	xios_field_is_active("rsdcsaf") .OR. xios_field_is_active("LWdnSFCcleanclr").OR. &
	5228	xios_field_is_active("LWupTOAcleanclr")) &
	5229	swaerofree_diag=.TRUE.
	5230
[3258]	5231	!--setting up dryaod_diag to TRUE in XIOS case
	5232	DO naero = 1, naero_tot-1
[3239]	5233	IF (xios_field_is_active("dryod550_"//name_aero_tau(naero))) dryaod_diag=.TRUE.
[3258]	5234	ENDDO
	5235	!
	5236	!--setting up ok_4xCO2atm to TRUE in XIOS case
	5237	IF (xios_field_is_active("rsut4co2").OR.xios_field_is_active("rlut4co2").OR. &
[3239]	5238	xios_field_is_active("rsutcs4co2").OR.xios_field_is_active("rlutcs4co2").OR. &
	5239	xios_field_is_active("rsu4co2").OR.xios_field_is_active("rsucs4co2").OR. &
	5240	xios_field_is_active("rsd4co2").OR.xios_field_is_active("rsdcs4co2").OR. &
	5241	xios_field_is_active("rlu4co2").OR.xios_field_is_active("rlucs4co2").OR. &
	5242	xios_field_is_active("rld4co2").OR.xios_field_is_active("rldcs4co2")) &
	5243	ok_4xCO2atm=.TRUE.
[3461]	5244	ENDIF
[3258]	5245	!$OMP BARRIER
[3461]	5246	CALL bcast(swaero_diag)
	5247	CALL bcast(swaerofree_diag)
	5248	CALL bcast(dryaod_diag)
	5249	CALL bcast(ok_4xCO2atm)
[3258]	5250	! write (lunout,*)'ok_4xCO2atm= ',swaero_diag, swaerofree_diag, dryaod_diag, ok_4xCO2atm
[3239]	5251	#endif
[3461]	5252	ENDIF
[3239]	5253
[2469]	5254	!====================================================================
	5255	! Arret du modele apres hgardfou en cas de detection d'un
	5256	! plantage par hgardfou
	5257	!====================================================================
[2235]	5258
	5259	IF (abortphy==1) THEN
	5260	abort_message ='Plantage hgardfou'
[2311]	5261	CALL abort_physic (modname,abort_message,1)
[2235]	5262	ENDIF
	5263
[2469]	5264	! 22.03.04 END
	5265	!
	5266	!====================================================================
	5267	! Si c'est la fin, il faut conserver l'etat de redemarrage
	5268	!====================================================================
	5269	!
[782]	5270
[2469]	5271	IF (lafin) THEN
	5272	itau_phy = itau_phy + itap
	5273	CALL phyredem ("restartphy.nc")
	5274	! open(97,form="unformatted",file="finbin")
	5275	! write(97) u_seri,v_seri,t_seri,q_seri
	5276	! close(97)
[3435]	5277
	5278	IF (is_omp_master) THEN
	5279
	5280	IF (read_climoz >= 1) THEN
	5281	IF (is_mpi_root) CALL nf95_close(ncid_climoz)
	5282	DEALLOCATE(press_edg_climoz) ! pointer
	5283	DEALLOCATE(press_cen_climoz) ! pointer
	5284	ENDIF
	5285
[2692]	5286	ENDIF
[3435]	5287	#ifdef CPP_XIOS
	5288	IF (is_omp_master) CALL xios_context_finalize
[3841]	5289	#ifdef INCA
[3871]	5290	if (type_trac == 'inca' ) then
	5291	IF (is_omp_master .and. grid_type==unstructured) THEN
	5292	CALL finalize_inca
	5293	ENDIF
	5294	endif
[3435]	5295	#endif
[3841]	5296
	5297	#endif
[3461]	5298	WRITE(lunout,*) ' physiq fin, nombre de steps ou cvpas = 1 : ', Ncvpaseq1
[2469]	5299	ENDIF
[1863]	5300
[2469]	5301	! first=.false.
[1863]	5302
[2469]	5303	END SUBROUTINE physiq
[2418]	5304
[2902]	5305	END MODULE physiq_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format