[3880] | 1 | ! radiation_aerosol.F90 - Derived type describing aerosol |
---|
| 2 | ! |
---|
| 3 | ! (C) Copyright 2014- ECMWF. |
---|
| 4 | ! |
---|
| 5 | ! This software is licensed under the terms of the Apache Licence Version 2.0 |
---|
| 6 | ! which can be obtained at http://www.apache.org/licenses/LICENSE-2.0. |
---|
| 7 | ! |
---|
| 8 | ! In applying this licence, ECMWF does not waive the privileges and immunities |
---|
| 9 | ! granted to it by virtue of its status as an intergovernmental organisation |
---|
| 10 | ! nor does it submit to any jurisdiction. |
---|
| 11 | ! |
---|
| 12 | ! Author: Robin Hogan |
---|
| 13 | ! Email: r.j.hogan@ecmwf.int |
---|
| 14 | ! |
---|
| 15 | ! Modifications |
---|
| 16 | ! 2018-04-15 R. Hogan Add "direct" option |
---|
| 17 | ! 2019-01-14 R. Hogan Added out_of_physical_bounds routine |
---|
| 18 | |
---|
| 19 | module radiation_aerosol |
---|
| 20 | |
---|
| 21 | use parkind1, only : jprb |
---|
| 22 | |
---|
| 23 | implicit none |
---|
| 24 | public |
---|
| 25 | |
---|
| 26 | !--------------------------------------------------------------------- |
---|
| 27 | ! Type describing the aerosol content in the atmosphere |
---|
| 28 | type aerosol_type |
---|
| 29 | ! The mass mixing ratio of config%n_aerosol_types different |
---|
| 30 | ! aerosol types dimensioned |
---|
| 31 | ! (ncol,istartlev:iendlev,config%n_aerosol_types), where ncol is |
---|
| 32 | ! the number of columns, istartlev:iendlev is the range of model |
---|
| 33 | ! levels where aerosols are present |
---|
| 34 | real(jprb), allocatable, dimension(:,:,:) :: & |
---|
| 35 | & mixing_ratio ! mass mixing ratio (kg/kg) |
---|
| 36 | |
---|
| 37 | ! Alternatively, if is_direct=true, the optical properties are |
---|
| 38 | ! provided directly and are dimensioned |
---|
| 39 | ! (nband,istartlev:iendlev,ncol) |
---|
| 40 | real(jprb), allocatable, dimension(:,:,:) :: & |
---|
| 41 | & od_sw, ssa_sw, g_sw, & ! Shortwave optical properties |
---|
| 42 | & od_lw, ssa_lw, g_lw ! Longwave optical properties |
---|
| 43 | |
---|
| 44 | ! Range of levels in which the aerosol properties are provided |
---|
| 45 | integer :: istartlev, iendlev |
---|
| 46 | |
---|
| 47 | ! Are the optical properties going to be provided directly by the |
---|
| 48 | ! user? |
---|
| 49 | logical :: is_direct = .false. |
---|
| 50 | |
---|
| 51 | contains |
---|
| 52 | procedure :: allocate => allocate_aerosol_arrays |
---|
| 53 | procedure :: allocate_direct => allocate_aerosol_arrays_direct |
---|
| 54 | procedure :: deallocate => deallocate_aerosol_arrays |
---|
| 55 | procedure :: out_of_physical_bounds |
---|
| 56 | end type aerosol_type |
---|
| 57 | |
---|
| 58 | contains |
---|
| 59 | |
---|
| 60 | !--------------------------------------------------------------------- |
---|
| 61 | ! Allocate array for describing aerosols, although in the offline |
---|
| 62 | ! code these are allocated when they are read from the NetCDF file |
---|
| 63 | subroutine allocate_aerosol_arrays(this, ncol, istartlev, iendlev, ntype) |
---|
| 64 | |
---|
| 65 | use yomhook, only : lhook, dr_hook |
---|
| 66 | |
---|
| 67 | class(aerosol_type), intent(inout) :: this |
---|
| 68 | integer, intent(in) :: ncol ! Number of columns |
---|
| 69 | integer, intent(in) :: istartlev, iendlev ! Level range |
---|
| 70 | integer, intent(in) :: ntype ! Number of aerosol types |
---|
| 71 | real(jprb) :: hook_handle |
---|
| 72 | |
---|
| 73 | if (lhook) call dr_hook('radiation_aerosol:allocate',0,hook_handle) |
---|
| 74 | |
---|
| 75 | allocate(this%mixing_ratio(ncol,istartlev:iendlev,ntype)) |
---|
| 76 | this%is_direct = .false. |
---|
| 77 | this%istartlev = istartlev |
---|
| 78 | this%iendlev = iendlev |
---|
| 79 | |
---|
| 80 | if (lhook) call dr_hook('radiation_aerosol:allocate',1,hook_handle) |
---|
| 81 | |
---|
| 82 | end subroutine allocate_aerosol_arrays |
---|
| 83 | |
---|
| 84 | |
---|
| 85 | !--------------------------------------------------------------------- |
---|
| 86 | ! Allocate arrays for describing aerosol optical properties |
---|
| 87 | subroutine allocate_aerosol_arrays_direct(this, config, & |
---|
| 88 | & ncol, istartlev, iendlev) |
---|
| 89 | |
---|
| 90 | use yomhook, only : lhook, dr_hook |
---|
| 91 | use radiation_config, only : config_type |
---|
| 92 | |
---|
| 93 | class(aerosol_type), intent(inout) :: this |
---|
| 94 | type(config_type), intent(in) :: config |
---|
| 95 | integer, intent(in) :: ncol ! Number of columns |
---|
| 96 | integer, intent(in) :: istartlev, iendlev ! Level range |
---|
| 97 | |
---|
| 98 | real(jprb) :: hook_handle |
---|
| 99 | |
---|
| 100 | if (lhook) call dr_hook('radiation_aerosol:allocate_direct',0,hook_handle) |
---|
| 101 | |
---|
| 102 | this%is_direct = .true. |
---|
| 103 | this%istartlev = istartlev |
---|
| 104 | this%iendlev = iendlev |
---|
| 105 | |
---|
| 106 | if (config%do_sw) then |
---|
| 107 | allocate(this%od_sw (config%n_bands_sw,istartlev:iendlev,ncol)) |
---|
| 108 | allocate(this%ssa_sw(config%n_bands_sw,istartlev:iendlev,ncol)) |
---|
| 109 | allocate(this%g_sw (config%n_bands_sw,istartlev:iendlev,ncol)) |
---|
| 110 | end if |
---|
| 111 | |
---|
| 112 | if (config%do_lw) then |
---|
| 113 | allocate(this%od_lw (config%n_bands_lw,istartlev:iendlev,ncol)) |
---|
| 114 | allocate(this%ssa_lw(config%n_bands_lw,istartlev:iendlev,ncol)) |
---|
| 115 | allocate(this%g_lw (config%n_bands_lw,istartlev:iendlev,ncol)) |
---|
| 116 | ! If longwave scattering by aerosol is not to be represented, |
---|
| 117 | ! then the user may wish to just provide absorption optical deth |
---|
| 118 | ! in od_lw, in which case we must set the following two |
---|
| 119 | ! variables to zero |
---|
| 120 | this%ssa_lw = 0.0_jprb |
---|
| 121 | this%g_lw = 0.0_jprb |
---|
| 122 | end if |
---|
| 123 | |
---|
| 124 | if (lhook) call dr_hook('radiation_aerosol:allocate_direct',1,hook_handle) |
---|
| 125 | |
---|
| 126 | end subroutine allocate_aerosol_arrays_direct |
---|
| 127 | |
---|
| 128 | |
---|
| 129 | !--------------------------------------------------------------------- |
---|
| 130 | ! Deallocate array |
---|
| 131 | subroutine deallocate_aerosol_arrays(this) |
---|
| 132 | |
---|
| 133 | use yomhook, only : lhook, dr_hook |
---|
| 134 | |
---|
| 135 | class(aerosol_type), intent(inout) :: this |
---|
| 136 | |
---|
| 137 | real(jprb) :: hook_handle |
---|
| 138 | |
---|
| 139 | if (lhook) call dr_hook('radiation_aerosol:deallocate',0,hook_handle) |
---|
| 140 | |
---|
| 141 | if (allocated(this%mixing_ratio)) deallocate(this%mixing_ratio) |
---|
| 142 | if (allocated(this%od_sw)) deallocate(this%od_sw) |
---|
| 143 | if (allocated(this%ssa_sw)) deallocate(this%ssa_sw) |
---|
| 144 | if (allocated(this%g_sw)) deallocate(this%g_sw) |
---|
| 145 | if (allocated(this%od_lw)) deallocate(this%od_lw) |
---|
| 146 | if (allocated(this%ssa_lw)) deallocate(this%ssa_lw) |
---|
| 147 | if (allocated(this%g_lw)) deallocate(this%g_lw) |
---|
| 148 | |
---|
| 149 | if (lhook) call dr_hook('radiation_aerosol:deallocate',1,hook_handle) |
---|
| 150 | |
---|
| 151 | end subroutine deallocate_aerosol_arrays |
---|
| 152 | |
---|
| 153 | |
---|
| 154 | !--------------------------------------------------------------------- |
---|
| 155 | ! Return .true. if variables are out of a physically sensible range, |
---|
| 156 | ! optionally only considering columns between istartcol and iendcol |
---|
| 157 | function out_of_physical_bounds(this, istartcol, iendcol, do_fix) result(is_bad) |
---|
| 158 | |
---|
| 159 | use yomhook, only : lhook, dr_hook |
---|
| 160 | use radiation_config, only : out_of_bounds_3d |
---|
| 161 | |
---|
| 162 | class(aerosol_type), intent(inout) :: this |
---|
| 163 | integer, optional,intent(in) :: istartcol, iendcol |
---|
| 164 | logical, optional,intent(in) :: do_fix |
---|
| 165 | logical :: is_bad |
---|
| 166 | |
---|
| 167 | logical :: do_fix_local |
---|
| 168 | |
---|
| 169 | real(jprb) :: hook_handle |
---|
| 170 | |
---|
| 171 | if (lhook) call dr_hook('radiation_aerosol:out_of_physical_bounds',0,hook_handle) |
---|
| 172 | |
---|
| 173 | if (present(do_fix)) then |
---|
| 174 | do_fix_local = do_fix |
---|
| 175 | else |
---|
| 176 | do_fix_local = .false. |
---|
| 177 | end if |
---|
| 178 | |
---|
| 179 | is_bad = out_of_bounds_3d(this%mixing_ratio, 'aerosol%mixing_ratio', & |
---|
| 180 | & 0.0_jprb, 1.0_jprb, do_fix_local, i1=istartcol, i2=iendcol) & |
---|
| 181 | & .or. out_of_bounds_3d(this%od_sw, 'aerosol%od_sw', & |
---|
| 182 | & 0.0_jprb, 100.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) & |
---|
| 183 | & .or. out_of_bounds_3d(this%od_lw, 'aerosol%od_lw', & |
---|
| 184 | & 0.0_jprb, 100.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) & |
---|
| 185 | & .or. out_of_bounds_3d(this%ssa_sw, 'aerosol%ssa_sw', & |
---|
| 186 | & 0.0_jprb, 1.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) & |
---|
| 187 | & .or. out_of_bounds_3d(this%ssa_lw, 'aerosol%ssa_lw', & |
---|
| 188 | & 0.0_jprb, 1.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) & |
---|
| 189 | & .or. out_of_bounds_3d(this%g_sw, 'aerosol%g_sw', & |
---|
| 190 | & 0.0_jprb, 1.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) & |
---|
| 191 | & .or. out_of_bounds_3d(this%g_lw, 'aerosol%g_lw', & |
---|
| 192 | & 0.0_jprb, 1.0_jprb, do_fix_local, k1=istartcol, k2=iendcol) |
---|
| 193 | |
---|
| 194 | if (lhook) call dr_hook('radiation_aerosol:out_of_physical_bounds',1,hook_handle) |
---|
| 195 | |
---|
| 196 | end function out_of_physical_bounds |
---|
| 197 | |
---|
| 198 | end module radiation_aerosol |
---|