| 1 | ! |
|---|
| 2 | ! $Id: add_phys_tend_mod.F90 3065 2017-11-10 13:25:09Z musat $ |
|---|
| 3 | ! |
|---|
| 4 | ! |
|---|
| 5 | MODULE add_phys_tend_mod |
|---|
| 6 | |
|---|
| 7 | IMPLICIT NONE |
|---|
| 8 | ! flag to compute diagnostics to check energy conservation. If fl_ebil==0, no check |
|---|
| 9 | INTEGER, SAVE :: fl_ebil |
|---|
| 10 | !$OMP THREADPRIVATE(fl_ebil) |
|---|
| 11 | ! flag to include modifcations to ensure energy conservation. If fl_cor_ebil==0, no corrections |
|---|
| 12 | ! Note that with time, all these modifications should be included by default |
|---|
| 13 | INTEGER, SAVE :: fl_cor_ebil |
|---|
| 14 | !$OMP THREADPRIVATE(fl_cor_ebil) |
|---|
| 15 | |
|---|
| 16 | CONTAINS |
|---|
| 17 | |
|---|
| 18 | SUBROUTINE add_pbl_tend(zdu, zdv, zdt, zdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap) |
|---|
| 19 | ! ====================================================================== |
|---|
| 20 | ! Ajoute les tendances de couche limite, soit determinees par la |
|---|
| 21 | ! parametrisation |
|---|
| 22 | ! physique, soit forcees, aux variables d etat de la dynamique t_seri, |
|---|
| 23 | ! q_seri ... |
|---|
| 24 | ! ====================================================================== |
|---|
| 25 | |
|---|
| 26 | |
|---|
| 27 | ! ====================================================================== |
|---|
| 28 | ! Declarations |
|---|
| 29 | ! ====================================================================== |
|---|
| 30 | |
|---|
| 31 | USE dimphy, ONLY: klon, klev |
|---|
| 32 | ! USE dimphy |
|---|
| 33 | USE phys_local_var_mod |
|---|
| 34 | USE phys_state_var_mod |
|---|
| 35 | USE mod_grid_phy_lmdz, ONLY: nbp_lev |
|---|
| 36 | IMPLICIT NONE |
|---|
| 37 | REAL,SAVE,ALLOCATABLE :: hthturb_gcssold(:) |
|---|
| 38 | REAL,SAVE,ALLOCATABLE :: hqturb_gcssold(:) |
|---|
| 39 | !$OMP THREADPRIVATE(hthturb_gcssold,hqturb_gcssold) |
|---|
| 40 | REAL,SAVE :: dtime_frcg |
|---|
| 41 | LOGICAL,SAVE :: turb_fcg_gcssold |
|---|
| 42 | LOGICAL,SAVE :: firstcall=.true. |
|---|
| 43 | !$OMP THREADPRIVATE(firstcall,turb_fcg_gcssold,dtime_frcg) |
|---|
| 44 | INTEGER abortphy |
|---|
| 45 | ! COMMON /turb_forcing/dtime_frcg, hthturb_gcssold, hqturb_gcssold, & |
|---|
| 46 | ! turb_fcg_gcssold |
|---|
| 47 | |
|---|
| 48 | ! Arguments : |
|---|
| 49 | ! ------------ |
|---|
| 50 | REAL zdu(klon, klev), zdv(klon, klev) |
|---|
| 51 | REAL zdt(klon, klev), zdq(klon, klev), zdql(klon, klev), zdqi(klon, klev) |
|---|
| 52 | CHARACTER *(*) text |
|---|
| 53 | REAL paprs(klon,klev+1) |
|---|
| 54 | INTEGER flag_inhib_tend ! if flag_inhib_tend != 0, tendencies are not added |
|---|
| 55 | INTEGER itap ! time step number |
|---|
| 56 | |
|---|
| 57 | ! Local : |
|---|
| 58 | ! -------- |
|---|
| 59 | REAL zzdt(klon, klev), zzdq(klon, klev) |
|---|
| 60 | INTEGER i, k |
|---|
| 61 | |
|---|
| 62 | IF (firstcall) THEN |
|---|
| 63 | ALLOCATE(hthturb_gcssold(nbp_lev)) |
|---|
| 64 | ALLOCATE(hqturb_gcssold(nbp_lev)) |
|---|
| 65 | firstcall=.false. |
|---|
| 66 | ENDIF |
|---|
| 67 | |
|---|
| 68 | IF (turb_fcg_gcssold) THEN |
|---|
| 69 | DO k = 1, klev |
|---|
| 70 | DO i = 1, klon |
|---|
| 71 | zzdt(i, k) = hthturb_gcssold(k)*dtime_frcg |
|---|
| 72 | zzdq(i, k) = hqturb_gcssold(k)*dtime_frcg |
|---|
| 73 | END DO |
|---|
| 74 | END DO |
|---|
| 75 | PRINT *, ' add_pbl_tend, dtime_frcg ', dtime_frcg |
|---|
| 76 | PRINT *, ' add_pbl_tend, zzdt ', zzdt |
|---|
| 77 | PRINT *, ' add_pbl_tend, zzdq ', zzdq |
|---|
| 78 | CALL add_phys_tend(zdu, zdv, zzdt, zzdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap, 0) |
|---|
| 79 | ELSE |
|---|
| 80 | CALL add_phys_tend(zdu, zdv, zdt, zdq, zdql, zdqi, paprs, text,abortphy,flag_inhib_tend, itap, 0) |
|---|
| 81 | END IF |
|---|
| 82 | |
|---|
| 83 | |
|---|
| 84 | RETURN |
|---|
| 85 | END SUBROUTINE add_pbl_tend |
|---|
| 86 | ! |
|---|
| 87 | ! $Id: add_phys_tend_mod.F90 3065 2017-11-10 13:25:09Z musat $ |
|---|
| 88 | ! |
|---|
| 89 | SUBROUTINE add_phys_tend (zdu,zdv,zdt,zdq,zdql,zdqi,paprs,text, & |
|---|
| 90 | abortphy,flag_inhib_tend, itap, diag_mode) |
|---|
| 91 | !====================================================================== |
|---|
| 92 | ! Ajoute les tendances des variables physiques aux variables |
|---|
| 93 | ! d'etat de la dynamique t_seri, q_seri ... |
|---|
| 94 | ! On en profite pour faire des tests sur les tendances en question. |
|---|
| 95 | !====================================================================== |
|---|
| 96 | |
|---|
| 97 | |
|---|
| 98 | !====================================================================== |
|---|
| 99 | ! Declarations |
|---|
| 100 | !====================================================================== |
|---|
| 101 | |
|---|
| 102 | USE dimphy, ONLY: klon, klev |
|---|
| 103 | USE phys_state_var_mod, ONLY : phys_tstep |
|---|
| 104 | USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, q_seri, t_seri |
|---|
| 105 | USE phys_state_var_mod, ONLY: ftsol |
|---|
| 106 | USE geometry_mod, ONLY: longitude_deg, latitude_deg |
|---|
| 107 | USE print_control_mod, ONLY: prt_level |
|---|
| 108 | USE cmp_seri_mod |
|---|
| 109 | USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col & |
|---|
| 110 | & , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col |
|---|
| 111 | IMPLICIT none |
|---|
| 112 | include "YOMCST.h" |
|---|
| 113 | include "clesphys.h" |
|---|
| 114 | |
|---|
| 115 | ! Arguments : |
|---|
| 116 | !------------ |
|---|
| 117 | REAL, DIMENSION(klon,klev), INTENT(IN) :: zdu, zdv |
|---|
| 118 | REAL, DIMENSION(klon,klev), INTENT(IN) :: zdt, zdql, zdqi |
|---|
| 119 | REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs |
|---|
| 120 | CHARACTER*(*), INTENT(IN) :: text |
|---|
| 121 | INTEGER, INTENT(IN) :: abortphy |
|---|
| 122 | INTEGER, INTENT(IN) :: flag_inhib_tend ! if not 0, tendencies are not added |
|---|
| 123 | INTEGER, INTENT(IN) :: itap ! time step number |
|---|
| 124 | INTEGER, INTENT(IN) :: diag_mode ! 0 -> normal effective mode |
|---|
| 125 | ! 1 -> only conservation stats are computed |
|---|
| 126 | ! |
|---|
| 127 | REAL, DIMENSION(klon,klev), INTENT(INOUT) :: zdq |
|---|
| 128 | |
|---|
| 129 | ! Local : |
|---|
| 130 | !-------- |
|---|
| 131 | REAL zt,zq |
|---|
| 132 | REAL zq_int, zqp_int, zq_new |
|---|
| 133 | |
|---|
| 134 | REAL zqp(klev) |
|---|
| 135 | |
|---|
| 136 | ! Save variables, used in diagnostic mode (diag_mode=1). |
|---|
| 137 | REAL, DIMENSION(klon,klev) :: sav_u_seri, sav_v_seri |
|---|
| 138 | REAL, DIMENSION(klon,klev) :: sav_ql_seri, sav_qs_seri, sav_q_seri |
|---|
| 139 | REAL, DIMENSION(klon,klev) :: sav_t_seri |
|---|
| 140 | REAL, DIMENSION(klon,klev) :: sav_zdq |
|---|
| 141 | ! |
|---|
| 142 | INTEGER i, k,j, n |
|---|
| 143 | INTEGER jadrs(klon*klev), jbad |
|---|
| 144 | INTEGER jqadrs(klon*klev), jqbad |
|---|
| 145 | INTEGER kadrs(klon*klev) |
|---|
| 146 | INTEGER kqadrs(klon*klev) |
|---|
| 147 | |
|---|
| 148 | LOGICAL done(klon) |
|---|
| 149 | |
|---|
| 150 | integer debug_level |
|---|
| 151 | logical, save :: first=.true. |
|---|
| 152 | !$OMP THREADPRIVATE(first) |
|---|
| 153 | ! |
|---|
| 154 | !====================================================================== |
|---|
| 155 | ! Variables for energy conservation tests |
|---|
| 156 | !====================================================================== |
|---|
| 157 | ! |
|---|
| 158 | |
|---|
| 159 | ! zh_col------- total enthalpy of vertical air column |
|---|
| 160 | ! (air with watter vapour, liquid and solid) (J/m2) |
|---|
| 161 | ! zh_dair_col--- total enthalpy of dry air (J/m2) |
|---|
| 162 | ! zh_qw_col---- total enthalpy of watter vapour (J/m2) |
|---|
| 163 | ! zh_ql_col---- total enthalpy of liquid watter (J/m2) |
|---|
| 164 | ! zh_qs_col---- total enthalpy of solid watter (J/m2) |
|---|
| 165 | ! zqw_col------ total mass of watter vapour (kg/m2) |
|---|
| 166 | ! zql_col------ total mass of liquid watter (kg/m2) |
|---|
| 167 | ! zqs_col------ total mass of solid watter (kg/m2) |
|---|
| 168 | ! zek_col------ total kinetic energy (kg/m2) |
|---|
| 169 | ! |
|---|
| 170 | REAL zairm(klon, klev) ! layer air mass (kg/m2) |
|---|
| 171 | REAL zqw_col(klon,2) |
|---|
| 172 | REAL zql_col(klon,2) |
|---|
| 173 | REAL zqs_col(klon,2) |
|---|
| 174 | REAL zek_col(klon,2) |
|---|
| 175 | REAL zh_dair_col(klon,2) |
|---|
| 176 | REAL zh_qw_col(klon,2), zh_ql_col(klon,2), zh_qs_col(klon,2) |
|---|
| 177 | REAL zh_col(klon,2) |
|---|
| 178 | |
|---|
| 179 | REAL zcpvap, zcwat, zcice |
|---|
| 180 | |
|---|
| 181 | !====================================================================== |
|---|
| 182 | ! Initialisations |
|---|
| 183 | |
|---|
| 184 | IF (prt_level >= 5) then |
|---|
| 185 | write (*,*) "In add_phys_tend, after ",text |
|---|
| 186 | call flush |
|---|
| 187 | end if |
|---|
| 188 | |
|---|
| 189 | ! if flag_inhib_tend != 0, tendencies are not added |
|---|
| 190 | IF (flag_inhib_tend /= 0) then |
|---|
| 191 | ! If requiered, diagnostics are shown |
|---|
| 192 | IF (flag_inhib_tend > 0) then |
|---|
| 193 | ! print some diagnostics if xxx_seri have changed |
|---|
| 194 | call cmp_seri(flag_inhib_tend,text) |
|---|
| 195 | END IF |
|---|
| 196 | RETURN ! on n ajoute pas les tendance |
|---|
| 197 | END IF |
|---|
| 198 | |
|---|
| 199 | IF (abortphy==1) RETURN ! on n ajoute pas les tendance si le modele |
|---|
| 200 | ! a deja plante. |
|---|
| 201 | |
|---|
| 202 | debug_level=10 |
|---|
| 203 | if (first) then |
|---|
| 204 | print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs |
|---|
| 205 | first=.false. |
|---|
| 206 | endif |
|---|
| 207 | ! |
|---|
| 208 | ! print *,'add_phys_tend: paprs ',paprs |
|---|
| 209 | ! When in diagnostic mode, save initial values of out variables |
|---|
| 210 | IF (diag_mode == 1) THEN |
|---|
| 211 | sav_u_seri(:,:) = u_seri(:,:) |
|---|
| 212 | sav_v_seri(:,:) = v_seri(:,:) |
|---|
| 213 | sav_ql_seri(:,:) = ql_seri(:,:) |
|---|
| 214 | sav_qs_seri(:,:) = qs_seri(:,:) |
|---|
| 215 | sav_q_seri(:,:) = q_seri(:,:) |
|---|
| 216 | sav_t_seri(:,:) = t_seri(:,:) |
|---|
| 217 | sav_zdq(:,:) = zdq(:,:) |
|---|
| 218 | ENDIF ! (diag_mode == 1) |
|---|
| 219 | !====================================================================== |
|---|
| 220 | ! Diagnostics for energy conservation tests |
|---|
| 221 | !====================================================================== |
|---|
| 222 | DO k = 1, klev |
|---|
| 223 | ! layer air mass |
|---|
| 224 | zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg |
|---|
| 225 | END DO |
|---|
| 226 | |
|---|
| 227 | if (fl_ebil .GT. 0) then |
|---|
| 228 | ! ------------------------------------------------ |
|---|
| 229 | ! Compute vertical sum for each atmospheric column |
|---|
| 230 | ! ------------------------------------------------ |
|---|
| 231 | n=1 ! begining of time step |
|---|
| 232 | |
|---|
| 233 | zcpvap = rcpv |
|---|
| 234 | zcwat = rcw |
|---|
| 235 | zcice = rcs |
|---|
| 236 | |
|---|
| 237 | CALL integr_v(klon, klev, zcpvap, & |
|---|
| 238 | t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zairm, & |
|---|
| 239 | zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), & |
|---|
| 240 | zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n)) |
|---|
| 241 | |
|---|
| 242 | end if ! end if (fl_ebil .GT. 0) |
|---|
| 243 | |
|---|
| 244 | !====================================================================== |
|---|
| 245 | ! Ajout des tendances sur le vent et l'eau liquide |
|---|
| 246 | !====================================================================== |
|---|
| 247 | |
|---|
| 248 | u_seri(:,:)=u_seri(:,:)+zdu(:,:) |
|---|
| 249 | v_seri(:,:)=v_seri(:,:)+zdv(:,:) |
|---|
| 250 | ql_seri(:,:)=ql_seri(:,:)+zdql(:,:) |
|---|
| 251 | qs_seri(:,:)=qs_seri(:,:)+zdqi(:,:) |
|---|
| 252 | |
|---|
| 253 | !====================================================================== |
|---|
| 254 | ! On ajoute les tendances de la temperature et de la vapeur d'eau |
|---|
| 255 | ! en verifiant que ca ne part pas dans les choux |
|---|
| 256 | !====================================================================== |
|---|
| 257 | |
|---|
| 258 | jbad=0 |
|---|
| 259 | jqbad=0 |
|---|
| 260 | DO k = 1, klev |
|---|
| 261 | DO i = 1, klon |
|---|
| 262 | zt=t_seri(i,k)+zdt(i,k) |
|---|
| 263 | zq=q_seri(i,k)+zdq(i,k) |
|---|
| 264 | IF ( zt>370. .or. zt<130. .or. abs(zdt(i,k))>50. ) then |
|---|
| 265 | jbad = jbad + 1 |
|---|
| 266 | jadrs(jbad) = i |
|---|
| 267 | kadrs(jbad) = k |
|---|
| 268 | ENDIF |
|---|
| 269 | IF ( zq<0. .or. zq>0.1 .or. abs(zdq(i,k))>1.e-2 ) then |
|---|
| 270 | jqbad = jqbad + 1 |
|---|
| 271 | jqadrs(jqbad) = i |
|---|
| 272 | kqadrs(jqbad) = k |
|---|
| 273 | ENDIF |
|---|
| 274 | t_seri(i,k)=zt |
|---|
| 275 | q_seri(i,k)=zq |
|---|
| 276 | ENDDO |
|---|
| 277 | ENDDO |
|---|
| 278 | |
|---|
| 279 | !===================================================================================== |
|---|
| 280 | ! Impression et stop en cas de probleme important |
|---|
| 281 | !===================================================================================== |
|---|
| 282 | |
|---|
| 283 | IF (jbad .GT. 0) THEN |
|---|
| 284 | DO j = 1, jbad |
|---|
| 285 | i=jadrs(j) |
|---|
| 286 | if(prt_level.ge.debug_level) THEN |
|---|
| 287 | print*,'PLANTAGE POUR LE POINT i lon lat =',& |
|---|
| 288 | i,longitude_deg(i),latitude_deg(i),text |
|---|
| 289 | print*,'l T dT Q dQ ' |
|---|
| 290 | DO k = 1, klev |
|---|
| 291 | write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k) |
|---|
| 292 | ENDDO |
|---|
| 293 | call print_debug_phys(i,debug_level,text) |
|---|
| 294 | endif |
|---|
| 295 | ENDDO |
|---|
| 296 | ENDIF |
|---|
| 297 | ! |
|---|
| 298 | !===================================================================================== |
|---|
| 299 | ! Impression, warning et correction en cas de probleme moins important |
|---|
| 300 | !===================================================================================== |
|---|
| 301 | IF (jqbad .GT. 0) THEN |
|---|
| 302 | done(:) = .false. !jyg |
|---|
| 303 | DO j = 1, jqbad |
|---|
| 304 | i=jqadrs(j) |
|---|
| 305 | if(prt_level.ge.debug_level) THEN |
|---|
| 306 | print*,'WARNING : EAU POUR LE POINT i lon lat =',& |
|---|
| 307 | i,longitude_deg(i),latitude_deg(i),text |
|---|
| 308 | print*,'l T dT Q dQ ' |
|---|
| 309 | DO k = 1, klev |
|---|
| 310 | write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k) |
|---|
| 311 | ENDDO |
|---|
| 312 | endif |
|---|
| 313 | IF (ok_conserv_q) THEN |
|---|
| 314 | !jyg<20140228 Corrections pour conservation de l'eau |
|---|
| 315 | IF (.NOT.done(i)) THEN !jyg |
|---|
| 316 | DO k = 1, klev |
|---|
| 317 | zqp(k) = max(q_seri(i,k),1.e-15) |
|---|
| 318 | ENDDO |
|---|
| 319 | zq_int = 0. |
|---|
| 320 | zqp_int = 0. |
|---|
| 321 | DO k = 1, klev |
|---|
| 322 | zq_int = zq_int + q_seri(i,k)*(paprs(i,k)-paprs(i,k+1))/Rg |
|---|
| 323 | zqp_int = zqp_int + zqp(k) *(paprs(i,k)-paprs(i,k+1))/Rg |
|---|
| 324 | ENDDO |
|---|
| 325 | if(prt_level.ge.debug_level) THEN |
|---|
| 326 | print*,' cas q_seri<1.e-15 i k zq_int zqp_int zq_int/zqp_int :', & |
|---|
| 327 | i, kqadrs(j), zq_int, zqp_int, zq_int/zqp_int |
|---|
| 328 | endif |
|---|
| 329 | DO k = 1, klev |
|---|
| 330 | zq_new = zqp(k)*zq_int/zqp_int |
|---|
| 331 | zdq(i,k) = zdq(i,k) + zq_new - q_seri(i,k) |
|---|
| 332 | q_seri(i,k) = zq_new |
|---|
| 333 | ENDDO |
|---|
| 334 | done(i) = .true. |
|---|
| 335 | ENDIF !(.NOT.done(i)) |
|---|
| 336 | ELSE |
|---|
| 337 | !jyg> |
|---|
| 338 | DO k = 1, klev |
|---|
| 339 | zq=q_seri(i,k)+zdq(i,k) |
|---|
| 340 | if (zq.lt.1.e-15) then |
|---|
| 341 | if (q_seri(i,k).lt.1.e-15) then |
|---|
| 342 | if(prt_level.ge.debug_level) THEN |
|---|
| 343 | print*,' cas q_seri<1.e-15 i k q_seri zq zdq :',i,k,q_seri(i,k),zq,zdq(i,k) |
|---|
| 344 | endif |
|---|
| 345 | q_seri(i,k)=1.e-15 |
|---|
| 346 | zdq(i,k)=(1.e-15-q_seri(i,k)) |
|---|
| 347 | endif |
|---|
| 348 | endif |
|---|
| 349 | ! zq=q_seri(i,k)+zdq(i,k) |
|---|
| 350 | ! if (zq.lt.1.e-15) then |
|---|
| 351 | ! zdq(i,k)=(1.e-15-q_seri(i,k)) |
|---|
| 352 | ! endif |
|---|
| 353 | ENDDO |
|---|
| 354 | !jyg<20140228 |
|---|
| 355 | ENDIF ! (ok_conserv_q) |
|---|
| 356 | !jyg> |
|---|
| 357 | ENDDO ! j = 1, jqbad |
|---|
| 358 | ENDIF |
|---|
| 359 | ! |
|---|
| 360 | |
|---|
| 361 | !IM ajout memes tests pour reverifier les jbad, jqbad beg |
|---|
| 362 | jbad=0 |
|---|
| 363 | jqbad=0 |
|---|
| 364 | DO k = 1, klev |
|---|
| 365 | DO i = 1, klon |
|---|
| 366 | IF ( t_seri(i,k)>370. .or. t_seri(i,k)<130. .or. abs(zdt(i,k))>50. ) then |
|---|
| 367 | jbad = jbad + 1 |
|---|
| 368 | jadrs(jbad) = i |
|---|
| 369 | ! if(prt_level.ge.debug_level) THEN |
|---|
| 370 | ! print*,'cas2 i k t_seri zdt',i,k,t_seri(i,k),zdt(i,k) |
|---|
| 371 | ! endif |
|---|
| 372 | ENDIF |
|---|
| 373 | IF ( q_seri(i,k)<0. .or. q_seri(i,k)>0.1 .or. abs(zdq(i,k))>1.e-2 ) then |
|---|
| 374 | jqbad = jqbad + 1 |
|---|
| 375 | jqadrs(jqbad) = i |
|---|
| 376 | kqadrs(jqbad) = k |
|---|
| 377 | ! if(prt_level.ge.debug_level) THEN |
|---|
| 378 | ! print*,'cas2 i k q_seri zdq',i,k,q_seri(i,k),zdq(i,k) |
|---|
| 379 | ! endif |
|---|
| 380 | ENDIF |
|---|
| 381 | ENDDO |
|---|
| 382 | ENDDO |
|---|
| 383 | IF (jbad .GT. 0) THEN |
|---|
| 384 | DO j = 1, jbad |
|---|
| 385 | i=jadrs(j) |
|---|
| 386 | k=kadrs(j) |
|---|
| 387 | if(prt_level.ge.debug_level) THEN |
|---|
| 388 | print*,'PLANTAGE2 POUR LE POINT i itap lon lat txt jbad zdt t',& |
|---|
| 389 | i,itap,longitude_deg(i),latitude_deg(i),text,jbad, & |
|---|
| 390 | & zdt(i,k),t_seri(i,k)-zdt(i,k) |
|---|
| 391 | !!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN |
|---|
| 392 | print*,'l T dT Q dQ ' |
|---|
| 393 | DO k = 1, klev |
|---|
| 394 | write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k) |
|---|
| 395 | ENDDO |
|---|
| 396 | call print_debug_phys(i,debug_level,text) |
|---|
| 397 | endif |
|---|
| 398 | ENDDO |
|---|
| 399 | ENDIF |
|---|
| 400 | ! |
|---|
| 401 | IF (jqbad .GT. 0) THEN |
|---|
| 402 | DO j = 1, jqbad |
|---|
| 403 | i=jqadrs(j) |
|---|
| 404 | k=kqadrs(j) |
|---|
| 405 | if(prt_level.ge.debug_level) THEN |
|---|
| 406 | print*,'WARNING : EAU2 POUR LE POINT i itap lon lat txt jqbad zdq q zdql ql',& |
|---|
| 407 | i,itap,longitude_deg(i),latitude_deg(i),text,jqbad,& |
|---|
| 408 | & zdq(i,k), q_seri(i,k)-zdq(i,k), zdql(i,k), ql_seri(i,k)-zdql(i,k) |
|---|
| 409 | !!! if(prt_level.ge.10.and.itap.GE.229.and.i.EQ.3027) THEN |
|---|
| 410 | print*,'l T dT Q dQ ' |
|---|
| 411 | DO k = 1, klev |
|---|
| 412 | write(*,'(i3,2f14.4,2e14.2)') k,t_seri(i,k),zdt(i,k),q_seri(i,k),zdq(i,k) |
|---|
| 413 | ENDDO |
|---|
| 414 | call print_debug_phys(i,debug_level,text) |
|---|
| 415 | endif |
|---|
| 416 | ENDDO |
|---|
| 417 | ENDIF |
|---|
| 418 | |
|---|
| 419 | !====================================================================== |
|---|
| 420 | ! Contrôle des min/max pour arrêt du modèle |
|---|
| 421 | ! Si le modele est en mode abortphy, on retire les tendances qu'on |
|---|
| 422 | ! vient d'ajouter. Pas exactement parce qu'on ne tient pas compte des |
|---|
| 423 | ! seuils. |
|---|
| 424 | !====================================================================== |
|---|
| 425 | |
|---|
| 426 | CALL hgardfou(t_seri,ftsol,text,abortphy) |
|---|
| 427 | IF (abortphy==1) THEN |
|---|
| 428 | Print*,'ERROR ABORT hgardfou dans ',text |
|---|
| 429 | ! JLD pourquoi on ne modifie pas de meme t_seri et q_seri ? |
|---|
| 430 | u_seri(:,:)=u_seri(:,:)-zdu(:,:) |
|---|
| 431 | v_seri(:,:)=v_seri(:,:)-zdv(:,:) |
|---|
| 432 | ql_seri(:,:)=ql_seri(:,:)-zdql(:,:) |
|---|
| 433 | qs_seri(:,:)=qs_seri(:,:)-zdqi(:,:) |
|---|
| 434 | ENDIF |
|---|
| 435 | |
|---|
| 436 | !====================================================================== |
|---|
| 437 | ! Diagnostics for energy conservation tests |
|---|
| 438 | !====================================================================== |
|---|
| 439 | |
|---|
| 440 | if (fl_ebil .GT. 0) then |
|---|
| 441 | |
|---|
| 442 | ! ------------------------------------------------ |
|---|
| 443 | ! Compute vertical sum for each atmospheric column |
|---|
| 444 | ! ------------------------------------------------ |
|---|
| 445 | n=2 ! end of time step |
|---|
| 446 | |
|---|
| 447 | CALL integr_v(klon, klev, zcpvap, & |
|---|
| 448 | t_seri, q_seri, ql_seri, qs_seri, u_seri, v_seri, zairm, & |
|---|
| 449 | zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), & |
|---|
| 450 | zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n)) |
|---|
| 451 | |
|---|
| 452 | ! ------------------------------------------------ |
|---|
| 453 | ! Compute the changes by unit of time |
|---|
| 454 | ! ------------------------------------------------ |
|---|
| 455 | |
|---|
| 456 | d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep |
|---|
| 457 | d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep |
|---|
| 458 | d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep |
|---|
| 459 | d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) |
|---|
| 460 | |
|---|
| 461 | d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep |
|---|
| 462 | |
|---|
| 463 | d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep |
|---|
| 464 | d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep |
|---|
| 465 | d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep |
|---|
| 466 | d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep |
|---|
| 467 | |
|---|
| 468 | d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep |
|---|
| 469 | |
|---|
| 470 | end if ! end if (fl_ebil .GT. 0) |
|---|
| 471 | ! |
|---|
| 472 | ! When in diagnostic mode, restore "out" variables to initial values. |
|---|
| 473 | IF (diag_mode == 1) THEN |
|---|
| 474 | u_seri(:,:) = sav_u_seri(:,:) |
|---|
| 475 | v_seri(:,:) = sav_v_seri(:,:) |
|---|
| 476 | ql_seri(:,:) = sav_ql_seri(:,:) |
|---|
| 477 | qs_seri(:,:) = sav_qs_seri(:,:) |
|---|
| 478 | q_seri(:,:) = sav_q_seri(:,:) |
|---|
| 479 | t_seri(:,:) = sav_t_seri(:,:) |
|---|
| 480 | zdq(:,:) = sav_zdq(:,:) |
|---|
| 481 | ENDIF ! (mode == 1) |
|---|
| 482 | |
|---|
| 483 | RETURN |
|---|
| 484 | END SUBROUTINE add_phys_tend |
|---|
| 485 | |
|---|
| 486 | SUBROUTINE diag_phys_tend (nlon, nlev, uu, vv, temp, qv, ql, qs, & |
|---|
| 487 | zdu,zdv,zdt,zdq,zdql,zdqs,paprs,text) |
|---|
| 488 | !====================================================================== |
|---|
| 489 | ! Ajoute les tendances des variables physiques aux variables |
|---|
| 490 | ! d'etat de la dynamique t_seri, q_seri ... |
|---|
| 491 | ! On en profite pour faire des tests sur les tendances en question. |
|---|
| 492 | !====================================================================== |
|---|
| 493 | |
|---|
| 494 | |
|---|
| 495 | !====================================================================== |
|---|
| 496 | ! Declarations |
|---|
| 497 | !====================================================================== |
|---|
| 498 | |
|---|
| 499 | USE phys_state_var_mod, ONLY : phys_tstep, ftsol |
|---|
| 500 | USE geometry_mod, ONLY: longitude_deg, latitude_deg |
|---|
| 501 | USE print_control_mod, ONLY: prt_level |
|---|
| 502 | USE cmp_seri_mod |
|---|
| 503 | USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col & |
|---|
| 504 | & , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col |
|---|
| 505 | IMPLICIT none |
|---|
| 506 | include "YOMCST.h" |
|---|
| 507 | include "clesphys.h" |
|---|
| 508 | |
|---|
| 509 | ! Arguments : |
|---|
| 510 | !------------ |
|---|
| 511 | INTEGER, INTENT(IN) :: nlon, nlev |
|---|
| 512 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: uu, vv |
|---|
| 513 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs |
|---|
| 514 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdu, zdv |
|---|
| 515 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zdt, zdq, zdql, zdqs |
|---|
| 516 | REAL, DIMENSION(nlon,nlev+1), INTENT(IN) :: paprs |
|---|
| 517 | CHARACTER*(*), INTENT(IN) :: text |
|---|
| 518 | |
|---|
| 519 | ! Local : |
|---|
| 520 | !-------- |
|---|
| 521 | REAL, DIMENSION(nlon,nlev) :: uu_n, vv_n |
|---|
| 522 | REAL, DIMENSION(nlon,nlev) :: temp_n, qv_n, ql_n, qs_n |
|---|
| 523 | |
|---|
| 524 | |
|---|
| 525 | ! |
|---|
| 526 | INTEGER k, n |
|---|
| 527 | |
|---|
| 528 | integer debug_level |
|---|
| 529 | logical, save :: first=.true. |
|---|
| 530 | !$OMP THREADPRIVATE(first) |
|---|
| 531 | ! |
|---|
| 532 | !====================================================================== |
|---|
| 533 | ! Variables for energy conservation tests |
|---|
| 534 | !====================================================================== |
|---|
| 535 | ! |
|---|
| 536 | |
|---|
| 537 | ! zh_col------- total enthalpy of vertical air column |
|---|
| 538 | ! (air with watter vapour, liquid and solid) (J/m2) |
|---|
| 539 | ! zh_dair_col--- total enthalpy of dry air (J/m2) |
|---|
| 540 | ! zh_qw_col---- total enthalpy of watter vapour (J/m2) |
|---|
| 541 | ! zh_ql_col---- total enthalpy of liquid watter (J/m2) |
|---|
| 542 | ! zh_qs_col---- total enthalpy of solid watter (J/m2) |
|---|
| 543 | ! zqw_col------ total mass of watter vapour (kg/m2) |
|---|
| 544 | ! zql_col------ total mass of liquid watter (kg/m2) |
|---|
| 545 | ! zqs_col------ total mass of solid watter (kg/m2) |
|---|
| 546 | ! zek_col------ total kinetic energy (kg/m2) |
|---|
| 547 | ! |
|---|
| 548 | REAL zairm(nlon, nlev) ! layer air mass (kg/m2) |
|---|
| 549 | REAL zqw_col(nlon,2) |
|---|
| 550 | REAL zql_col(nlon,2) |
|---|
| 551 | REAL zqs_col(nlon,2) |
|---|
| 552 | REAL zek_col(nlon,2) |
|---|
| 553 | REAL zh_dair_col(nlon,2) |
|---|
| 554 | REAL zh_qw_col(nlon,2), zh_ql_col(nlon,2), zh_qs_col(nlon,2) |
|---|
| 555 | REAL zh_col(nlon,2) |
|---|
| 556 | |
|---|
| 557 | !====================================================================== |
|---|
| 558 | ! Initialisations |
|---|
| 559 | |
|---|
| 560 | IF (prt_level >= 5) then |
|---|
| 561 | write (*,*) "In diag_phys_tend, after ",text |
|---|
| 562 | call flush |
|---|
| 563 | end if |
|---|
| 564 | |
|---|
| 565 | debug_level=10 |
|---|
| 566 | if (first) then |
|---|
| 567 | print *,"TestJLD rcpv, rcw, rcs",rcpv, rcw, rcs |
|---|
| 568 | first=.false. |
|---|
| 569 | endif |
|---|
| 570 | ! |
|---|
| 571 | ! print *,'add_phys_tend: paprs ',paprs |
|---|
| 572 | !====================================================================== |
|---|
| 573 | ! Diagnostics for energy conservation tests |
|---|
| 574 | !====================================================================== |
|---|
| 575 | DO k = 1, nlev |
|---|
| 576 | ! layer air mass |
|---|
| 577 | zairm(:, k) = (paprs(:,k)-paprs(:,k+1))/rg |
|---|
| 578 | END DO |
|---|
| 579 | |
|---|
| 580 | if (fl_ebil .GT. 0) then |
|---|
| 581 | ! ------------------------------------------------ |
|---|
| 582 | ! Compute vertical sum for each atmospheric column |
|---|
| 583 | ! ------------------------------------------------ |
|---|
| 584 | n=1 ! begining of time step |
|---|
| 585 | |
|---|
| 586 | CALL integr_v(nlon, nlev, rcpv, & |
|---|
| 587 | temp, qv, ql, qs, uu, vv, zairm, & |
|---|
| 588 | zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), & |
|---|
| 589 | zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n)) |
|---|
| 590 | |
|---|
| 591 | end if ! end if (fl_ebil .GT. 0) |
|---|
| 592 | |
|---|
| 593 | !====================================================================== |
|---|
| 594 | ! Ajout des tendances sur le vent, la temperature et les diverses phases de l'eau |
|---|
| 595 | !====================================================================== |
|---|
| 596 | |
|---|
| 597 | uu_n(:,:)=uu(:,:)+zdu(:,:) |
|---|
| 598 | vv_n(:,:)=vv(:,:)+zdv(:,:) |
|---|
| 599 | qv_n(:,:)=qv(:,:)+zdq(:,:) |
|---|
| 600 | ql_n(:,:)=ql(:,:)+zdql(:,:) |
|---|
| 601 | qs_n(:,:)=qs(:,:)+zdqs(:,:) |
|---|
| 602 | temp_n(:,:)=temp(:,:)+zdt(:,:) |
|---|
| 603 | |
|---|
| 604 | |
|---|
| 605 | |
|---|
| 606 | !====================================================================== |
|---|
| 607 | ! Diagnostics for energy conservation tests |
|---|
| 608 | !====================================================================== |
|---|
| 609 | |
|---|
| 610 | if (fl_ebil .GT. 0) then |
|---|
| 611 | |
|---|
| 612 | ! ------------------------------------------------ |
|---|
| 613 | ! Compute vertical sum for each atmospheric column |
|---|
| 614 | ! ------------------------------------------------ |
|---|
| 615 | n=2 ! end of time step |
|---|
| 616 | |
|---|
| 617 | CALL integr_v(nlon, nlev, rcpv, & |
|---|
| 618 | temp_n, qv_n, ql_n, qs_n, uu_n, vv_n, zairm, & |
|---|
| 619 | zqw_col(:,n), zql_col(:,n), zqs_col(:,n), zek_col(:,n), zh_dair_col(:,n), & |
|---|
| 620 | zh_qw_col(:,n), zh_ql_col(:,n), zh_qs_col(:,n), zh_col(:,n)) |
|---|
| 621 | |
|---|
| 622 | ! ------------------------------------------------ |
|---|
| 623 | ! Compute the changes by unit of time |
|---|
| 624 | ! ------------------------------------------------ |
|---|
| 625 | |
|---|
| 626 | d_qw_col(:) = (zqw_col(:,2)-zqw_col(:,1))/phys_tstep |
|---|
| 627 | d_ql_col(:) = (zql_col(:,2)-zql_col(:,1))/phys_tstep |
|---|
| 628 | d_qs_col(:) = (zqs_col(:,2)-zqs_col(:,1))/phys_tstep |
|---|
| 629 | d_qt_col(:) = d_qw_col(:) + d_ql_col(:) + d_qs_col(:) |
|---|
| 630 | |
|---|
| 631 | d_ek_col(:) = (zek_col(:,2)-zek_col(:,1))/phys_tstep |
|---|
| 632 | |
|---|
| 633 | print *,'zdu ', zdu |
|---|
| 634 | print *,'zdv ', zdv |
|---|
| 635 | print *,'d_ek_col, zek_col(2), zek_col(1) ',d_ek_col(1), zek_col(1,2), zek_col(1,1) |
|---|
| 636 | |
|---|
| 637 | d_h_dair_col(:) = (zh_dair_col(:,2)-zh_dair_col(:,1))/phys_tstep |
|---|
| 638 | d_h_qw_col(:) = (zh_qw_col(:,2)-zh_qw_col(:,1))/phys_tstep |
|---|
| 639 | d_h_ql_col(:) = (zh_ql_col(:,2)-zh_ql_col(:,1))/phys_tstep |
|---|
| 640 | d_h_qs_col(:) = (zh_qs_col(:,2)-zh_qs_col(:,1))/phys_tstep |
|---|
| 641 | |
|---|
| 642 | d_h_col = (zh_col(:,2)-zh_col(:,1))/phys_tstep |
|---|
| 643 | |
|---|
| 644 | end if ! end if (fl_ebil .GT. 0) |
|---|
| 645 | ! |
|---|
| 646 | |
|---|
| 647 | RETURN |
|---|
| 648 | END SUBROUTINE diag_phys_tend |
|---|
| 649 | |
|---|
| 650 | SUBROUTINE integr_v(nlon, nlev, zcpvap, & |
|---|
| 651 | temp, qv, ql, qs, uu, vv, zairm, & |
|---|
| 652 | zqw_col, zql_col, zqs_col, zek_col, zh_dair_col, & |
|---|
| 653 | zh_qw_col, zh_ql_col, zh_qs_col, zh_col) |
|---|
| 654 | |
|---|
| 655 | IMPLICIT none |
|---|
| 656 | include "YOMCST.h" |
|---|
| 657 | |
|---|
| 658 | INTEGER, INTENT(IN) :: nlon,nlev |
|---|
| 659 | REAL, INTENT(IN) :: zcpvap |
|---|
| 660 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: temp, qv, ql, qs, uu, vv |
|---|
| 661 | REAL, DIMENSION(nlon,nlev), INTENT(IN) :: zairm |
|---|
| 662 | REAL, DIMENSION(nlon), INTENT(OUT) :: zqw_col |
|---|
| 663 | REAL, DIMENSION(nlon), INTENT(OUT) :: zql_col |
|---|
| 664 | REAL, DIMENSION(nlon), INTENT(OUT) :: zqs_col |
|---|
| 665 | REAL, DIMENSION(nlon), INTENT(OUT) :: zek_col |
|---|
| 666 | REAL, DIMENSION(nlon), INTENT(OUT) :: zh_dair_col |
|---|
| 667 | REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qw_col |
|---|
| 668 | REAL, DIMENSION(nlon), INTENT(OUT) :: zh_ql_col |
|---|
| 669 | REAL, DIMENSION(nlon), INTENT(OUT) :: zh_qs_col |
|---|
| 670 | REAL, DIMENSION(nlon), INTENT(OUT) :: zh_col |
|---|
| 671 | |
|---|
| 672 | INTEGER :: i, k |
|---|
| 673 | |
|---|
| 674 | |
|---|
| 675 | ! Reset variables |
|---|
| 676 | zqw_col(:) = 0. |
|---|
| 677 | zql_col(:) = 0. |
|---|
| 678 | zqs_col(:) = 0. |
|---|
| 679 | zek_col(:) = 0. |
|---|
| 680 | zh_dair_col(:) = 0. |
|---|
| 681 | zh_qw_col(:) = 0. |
|---|
| 682 | zh_ql_col(:) = 0. |
|---|
| 683 | zh_qs_col(:) = 0. |
|---|
| 684 | |
|---|
| 685 | !JLD write (*,*) "rcpd, zcpvap, zcwat, zcice ",rcpd, zcpvap, zcwat, zcice |
|---|
| 686 | |
|---|
| 687 | ! ------------------------------------------------ |
|---|
| 688 | ! Compute vertical sum for each atmospheric column |
|---|
| 689 | ! ------------------------------------------------ |
|---|
| 690 | DO k = 1, nlev |
|---|
| 691 | DO i = 1, nlon |
|---|
| 692 | ! Watter mass |
|---|
| 693 | zqw_col(i) = zqw_col(i) + qv(i, k)*zairm(i, k) |
|---|
| 694 | zql_col(i) = zql_col(i) + ql(i, k)*zairm(i, k) |
|---|
| 695 | zqs_col(i) = zqs_col(i) + qs(i, k)*zairm(i, k) |
|---|
| 696 | ! Kinetic Energy |
|---|
| 697 | zek_col(i) = zek_col(i) + 0.5*(uu(i,k)**2+vv(i,k)**2)*zairm(i, k) |
|---|
| 698 | ! Air enthalpy : dry air, water vapour, liquid, solid |
|---|
| 699 | zh_dair_col(i) = zh_dair_col(i) + rcpd*(1.-qv(i,k)-ql(i,k)-qs(i,k))* & |
|---|
| 700 | zairm(i, k)*temp(i, k) |
|---|
| 701 | zh_qw_col(i) = zh_qw_col(i) + zcpvap*temp(i, k) *qv(i, k)*zairm(i, k) !jyg |
|---|
| 702 | zh_ql_col(i) = zh_ql_col(i) + (zcpvap*temp(i, k) - rlvtt)*ql(i, k)*zairm(i, k) !jyg |
|---|
| 703 | zh_qs_col(i) = zh_qs_col(i) + (zcpvap*temp(i, k) - rlstt)*qs(i, k)*zairm(i, k) !jyg |
|---|
| 704 | END DO |
|---|
| 705 | END DO |
|---|
| 706 | ! compute total air enthalpy |
|---|
| 707 | zh_col(:) = zh_dair_col(:) + zh_qw_col(:) + zh_ql_col(:) + zh_qs_col(:) |
|---|
| 708 | |
|---|
| 709 | END SUBROUTINE integr_v |
|---|
| 710 | |
|---|
| 711 | SUBROUTINE prt_enerbil (text, itap) |
|---|
| 712 | !====================================================================== |
|---|
| 713 | ! Print enenrgy budget diagnotics for the 1D case |
|---|
| 714 | !====================================================================== |
|---|
| 715 | |
|---|
| 716 | !====================================================================== |
|---|
| 717 | ! Declarations |
|---|
| 718 | !====================================================================== |
|---|
| 719 | |
|---|
| 720 | USE dimphy, ONLY: klon, klev |
|---|
| 721 | USE phys_state_var_mod, ONLY : phys_tstep |
|---|
| 722 | USE phys_state_var_mod, ONLY : topsw, toplw, solsw, sollw, rain_con, snow_con |
|---|
| 723 | USE geometry_mod, ONLY: longitude_deg, latitude_deg |
|---|
| 724 | USE print_control_mod, ONLY: prt_level |
|---|
| 725 | USE cmp_seri_mod |
|---|
| 726 | USE phys_output_var_mod, ONLY : d_qw_col, d_ql_col, d_qs_col, d_qt_col, d_ek_col, d_h_dair_col & |
|---|
| 727 | & , d_h_qw_col, d_h_ql_col, d_h_qs_col, d_h_col |
|---|
| 728 | USE phys_local_var_mod, ONLY: evap, sens |
|---|
| 729 | USE phys_local_var_mod, ONLY: u_seri, v_seri, ql_seri, qs_seri, q_seri, t_seri & |
|---|
| 730 | & , rain_lsc, snow_lsc |
|---|
| 731 | USE climb_hq_mod, ONLY : d_h_col_vdf, f_h_bnd |
|---|
| 732 | IMPLICIT none |
|---|
| 733 | include "YOMCST.h" |
|---|
| 734 | |
|---|
| 735 | ! Arguments : |
|---|
| 736 | !------------ |
|---|
| 737 | CHARACTER*(*) text ! text specifing the involved parametrization |
|---|
| 738 | integer itap ! time step number |
|---|
| 739 | ! local variables |
|---|
| 740 | ! --------------- |
|---|
| 741 | real bilq_seuil, bilh_seuil ! thresold on error in Q and H budget |
|---|
| 742 | real bilq_error, bilh_error ! erros in Q and H budget |
|---|
| 743 | real bilq_bnd, bilh_bnd ! Q and H budget due to exchange with boundaries |
|---|
| 744 | integer bilq_ok, bilh_ok |
|---|
| 745 | CHARACTER*(12) status |
|---|
| 746 | |
|---|
| 747 | bilq_seuil = 1.E-10 |
|---|
| 748 | bilh_seuil = 1.E-1 |
|---|
| 749 | bilq_ok=0 |
|---|
| 750 | bilh_ok=0 |
|---|
| 751 | |
|---|
| 752 | !!print *,'prt_level:',prt_level,' fl_ebil:',fl_ebil,' fl_cor_ebil:',fl_cor_ebil |
|---|
| 753 | if ( (fl_ebil .GT. 0) .and. (klon .EQ. 1)) then |
|---|
| 754 | |
|---|
| 755 | bilq_bnd = 0. |
|---|
| 756 | bilh_bnd = 0. |
|---|
| 757 | |
|---|
| 758 | param: SELECT CASE (text) |
|---|
| 759 | CASE("vdf") param |
|---|
| 760 | bilq_bnd = evap(1) |
|---|
| 761 | bilh_bnd = sens(1)+(rcpv-rcpd)*evap(1)*t_seri(1,1) |
|---|
| 762 | CASE("lsc") param |
|---|
| 763 | bilq_bnd = - rain_lsc(1) - snow_lsc(1) |
|---|
| 764 | bilh_bnd = (-(rcw-rcpd)*t_seri(1,1) + rlvtt) * rain_lsc(1) & |
|---|
| 765 | & + (-(rcs-rcpd)*t_seri(1,1) + rlstt) * snow_lsc(1) |
|---|
| 766 | CASE("convection") param |
|---|
| 767 | bilq_bnd = - rain_con(1) - snow_con(1) |
|---|
| 768 | bilh_bnd = (-(rcw-rcpd)*t_seri(1,1) + rlvtt) * rain_con(1) & |
|---|
| 769 | & + (-(rcs-rcpd)*t_seri(1,1) + rlstt) * snow_con(1) |
|---|
| 770 | CASE("SW") param |
|---|
| 771 | bilh_bnd = topsw(1) - solsw(1) |
|---|
| 772 | CASE("LW") param |
|---|
| 773 | bilh_bnd = -(toplw(1) + sollw(1)) |
|---|
| 774 | CASE DEFAULT param |
|---|
| 775 | bilq_bnd = 0. |
|---|
| 776 | bilh_bnd = 0. |
|---|
| 777 | END SELECT param |
|---|
| 778 | |
|---|
| 779 | bilq_error = d_qt_col(1) - bilq_bnd |
|---|
| 780 | bilh_error = d_h_col(1) - bilh_bnd |
|---|
| 781 | ! are the errors too large? |
|---|
| 782 | if ( abs(bilq_error) .gt. bilq_seuil) bilq_ok=1 |
|---|
| 783 | if ( abs(bilh_error) .gt. bilh_seuil) bilh_ok=1 |
|---|
| 784 | ! |
|---|
| 785 | ! Print diagnostics |
|---|
| 786 | ! ================= |
|---|
| 787 | if ( (bilq_ok .eq. 0).and.(bilh_ok .eq. 0) ) then |
|---|
| 788 | status="enerbil-OK" |
|---|
| 789 | else |
|---|
| 790 | status="enerbil-PB" |
|---|
| 791 | end if |
|---|
| 792 | |
|---|
| 793 | if ( prt_level .GE. 3) then |
|---|
| 794 | write(*,9010) text,status," itap:",itap,"enerbilERROR: Q", bilq_error," H", bilh_error |
|---|
| 795 | 9010 format (1x,A8,2x,A12,A6,I4,A18,E15.6,A5,E15.6) |
|---|
| 796 | end if |
|---|
| 797 | if ( prt_level .GE. 3) then |
|---|
| 798 | write(*,9000) text,"enerbil: Q,H,KE budget", d_qt_col(1), d_h_col(1),d_ek_col(1) |
|---|
| 799 | end if |
|---|
| 800 | if ( prt_level .GE. 5) then |
|---|
| 801 | write(*,9000) text,"enerbil at boundaries: Q, H",bilq_bnd, bilh_bnd |
|---|
| 802 | write(*,9000) text,"enerbil: water budget",d_qt_col(1),d_qw_col(1),d_ql_col(1),d_qs_col(1) |
|---|
| 803 | write(*,9000) text,"enerbil: enthalpy budget",d_h_col(1),d_h_dair_col(1),d_h_qw_col(1),d_h_ql_col(1),d_h_qs_col(1) |
|---|
| 804 | end if |
|---|
| 805 | |
|---|
| 806 | specific_diag: SELECT CASE (text) |
|---|
| 807 | CASE("vdf") specific_diag |
|---|
| 808 | if ( prt_level .GE. 5) then |
|---|
| 809 | write(*,9000) text,"enerbil: d_h, bilh, sens,t_seri", d_h_col(1), bilh_bnd, sens(1), t_seri(1,1) |
|---|
| 810 | write(*,9000) text,"enerbil: d_h_col_vdf, f_h, diff",d_h_col_vdf, f_h_bnd, bilh_bnd-sens(1) |
|---|
| 811 | end if |
|---|
| 812 | CASE("lsc") specific_diag |
|---|
| 813 | if ( prt_level .GE. 5) then |
|---|
| 814 | write(*,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_lsc(1), rlvtt * rain_lsc(1), -(rcw-rcpd)*t_seri(1,1) * rain_lsc(1) |
|---|
| 815 | write(*,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_lsc(1), rlstt * snow_lsc(1), -(rcs-rcpd)*t_seri(1,1) * snow_lsc(1) |
|---|
| 816 | end if |
|---|
| 817 | CASE("convection") specific_diag |
|---|
| 818 | if ( prt_level .GE. 5) then |
|---|
| 819 | write(*,9000) text,"enerbil: rain, bil_lat, bil_sens", rain_con(1), rlvtt * rain_con(1), -(rcw-rcpd)*t_seri(1,1) * rain_con(1) |
|---|
| 820 | write(*,9000) text,"enerbil: snow, bil_lat, bil_sens", snow_con(1), rlstt * snow_con(1), -(rcs-rcpd)*t_seri(1,1) * snow_con(1) |
|---|
| 821 | end if |
|---|
| 822 | END SELECT specific_diag |
|---|
| 823 | |
|---|
| 824 | 9000 format (1x,A8,2x,A35,10E15.6) |
|---|
| 825 | |
|---|
| 826 | end if ! end if (fl_ebil .GT. 0) |
|---|
| 827 | |
|---|
| 828 | END SUBROUTINE prt_enerbil |
|---|
| 829 | |
|---|
| 830 | END MODULE add_phys_tend_mod |
|---|
