Context Navigation

phys_output_mod.F90 @ 5104

Last change on this file since 5104 was 5103, checked in by abarral, 4 months ago
Handle CPP_INLANDSIS in lmdz_cppkeys_wrapper.F90 Remove obsolete key wrgrads_thermcell, _ADV_HALO, _ADV_HALLO, isminmax Remove redundant uses of CPPKEY_INCA (thanks acozic) Remove obsolete misc/write_field.F90 Remove unused ioipsl_* wrappers Remove calls to WriteField_u with wrong signature Convert .F -> .[fF]90 (lint) uppercase fortran operators [note: 1d and iso still broken - working on it]
File size: 28.8 KB

Line
1	! $Id: phys_output_mod.F90 3792 2021-01-04 17:01:25Z evignon $
2
3	MODULE phys_output_mod
4	USE indice_sol_mod
5	USE phys_output_var_mod
6	USE phys_output_write_mod, ONLY: phys_output_write
7	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
8	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_STRATAER
9
10	! Abderrahmane 12 2007
11	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
12	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
13	! histmth.nc : moyennes mensuelles
14	! histday.nc : moyennes journalieres
15	! histhf.nc : moyennes toutes les 3 heures
16	! histins.nc : valeurs instantanees
17	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
18
19	CONTAINS
20
21	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
22	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
23	!! histbeg, histvert et histdef
24	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
25
26	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
27	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
28	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
29	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
30	phys_out_filestations, &
31	aerosol_couple, flag_aerosol_strat, &
32	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
33	d_u, d_t, qx, d_qx, zmasse, ok_sync)
34
35	USE iophy
36	USE dimphy
37	USE infotrac_phy, ONLY: nqtot, tracers, niso, ntraciso=>ntiso
38	USE strings_mod, ONLY: maxlen
39	USE ioipsl
40	USE phys_cal_mod, ONLY: hour, calend
41	USE mod_phys_lmdz_para
42	!Martin
43	USE surface_data, ONLY: landice_opt
44	USE phys_output_ctrlout_mod
45	USE mod_grid_phy_lmdz, only: klon_glo,nbp_lon,nbp_lat
46	USE print_control_mod, ONLY: prt_level,lunout
47	USE vertical_layers_mod, ONLY: ap,bp,preff,presnivs, aps, bps, pseudoalt, presinter
48	USE time_phylmdz_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
49	! ug Pour les sorties XIOS
50	USE wxios
51	#ifdef ISO
52	USE isotopes_mod, ONLY: isoName,iso_HTO
53	#ifdef ISOTRAC
54	use isotrac_mod, only: index_zone,index_iso,strtrac
55	#endif
56	#endif
57
58	IMPLICIT NONE
59	include "clesphys.h"
60	include "alpale.h"
61	include "YOMCST.h"
62
63	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
64	INTEGER, INTENT(IN) :: ivap
65	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
66	LOGICAL, INTENT(IN) :: ok_sync
67	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
68	REAL, INTENT(IN) :: pdtphys
69	REAL, DIMENSION(klon), INTENT(IN) :: pphis
70	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_u, d_t
71	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
72	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
73	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
74
75
76	REAL,DIMENSION(klon),INTENT(IN) :: rlon
77	REAL,DIMENSION(klon),INTENT(IN) :: rlat
78	INTEGER, INTENT(IN) :: pim
79	INTEGER, DIMENSION(pim) :: tabij
80	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
81	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
82	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
83
84	INTEGER :: jjmp1
85	INTEGER :: nlevSTD, radpas
86	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
87	LOGICAL :: ok_LES,ok_ade,ok_aie
88	INTEGER :: flag_aerosol_strat
89	LOGICAL :: aerosol_couple
90	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
91	! Allowed values are 0, 1 and 2
92	! 0: do not read an ozone climatology
93	! 1: read a single ozone climatology that will be used day and night
94	! 2: read two ozone climatologies, the average day and night
95	! climatology and the daylight climatology
96
97	REAL :: dtime
98	INTEGER :: idayref
99	REAL :: zjulian_start, zjulian
100	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
101	REAL, DIMENSION(nlevSTD) :: rlevSTD
102	INTEGER :: nsrf, k, iq, iff, i, j, ilev, itr, ixt, iiso, izone
103	INTEGER :: naero
104	LOGICAL :: ok_veget
105	INTEGER :: iflag_pbl
106	INTEGER :: iflag_pbl_split
107	CHARACTER(LEN=4) :: bb2
108	CHARACTER(LEN=2) :: bb3
109	CHARACTER(LEN=6) :: type_ocean
110	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
111	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
112	INTEGER :: imin_ins, imax_ins
113	INTEGER :: jmin_ins, jmax_ins
114	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
115	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
116	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
117	'Default', 'Default', 'Default', 'Default', 'Default' /)
118	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
119	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
120
121	#ifdef ISO
122	CHARACTER(LEN=maxlen) :: outiso
123	CHARACTER(LEN=20) :: unit
124	#endif
125	CHARACTER(LEN=maxlen) :: tnam, lnam, dn
126	INTEGER :: flag(nfiles)
127
128	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
129	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
130	LOGICAL, DIMENSION(nfiles), SAVE :: &
131	phys_out_regfkey = [.FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE.]
132	REAL, DIMENSION(nfiles), SAVE :: &
133	phys_out_lonmin = [ -180., -180., -180., -180., -180., -180., -180., -180., -180., -180.], &
134	phys_out_lonmax = [ 180., 180., 180., 180., 180., 180., 180., 180., 180., 180.], &
135	phys_out_latmin = [ -90., -90., -90., -90., -90., -90., -90., -90., -90., -90.], &
136	phys_out_latmax = [ 90., 90., 90., 90., 90., 90., 90., 90., 90., 90.]
137	REAL, DIMENSION(klev,2) :: Ahyb_bounds, Bhyb_bounds
138	REAL, DIMENSION(klev+1) :: lev_index
139
140	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
141	INTEGER :: x_an, x_mois, x_jour
142	REAL :: x_heure
143	INTEGER :: ini_an, ini_mois, ini_jour
144	REAL :: ini_heure
145	INTEGER :: ISW
146	REAL, DIMENSION(NSW) :: wl1_sun, wl2_sun !wavelength bounds (in um) for SW
147	REAL, DIMENSION(NSW) :: wn1_sun, wn2_sun !wavenumber bounds (in m-1) for SW
148	REAL, DIMENSION(NSW) :: spectband !mean wavenumb. of each sp.band
149	REAL, DIMENSION(NSW,2) :: spbnds_sun !bounds of spectband
150
151	WRITE(lunout,*) 'Debut phys_output_mod.F90'
152	! Initialisations (Valeurs par defaut
153
154	DO ilev=1,klev
155	Ahyb_bounds(ilev,1) = ap(ilev)
156	Ahyb_bounds(ilev,2) = ap(ilev+1)
157	Bhyb_bounds(ilev,1) = bp(ilev)
158	Bhyb_bounds(ilev,2) = bp(ilev+1)
159	lev_index(ilev) = REAL(ilev)
160	END DO
161	lev_index(klev+1) = REAL(klev+1)
162
163	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
164	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
165	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
166	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
167	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
168	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
169	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
170
171	#ifdef ISO
172	ALLOCATE(o_xtprecip(ntraciso))
173	ALLOCATE(o_xtplul(ntraciso))
174	ALLOCATE(o_xtpluc(ntraciso))
175	ALLOCATE(o_xtevap(ntraciso))
176	ALLOCATE(o_xtevap_srf(ntraciso,4))
177	ALLOCATE(o_xtovap(ntraciso))
178	ALLOCATE(o_xtoliq(ntraciso))
179	ALLOCATE(o_xtcond(ntraciso))
180	ALLOCATE(o_xtrunoff_diag(ntraciso))
181	ALLOCATE(o_dxtdyn(ntraciso))
182	ALLOCATE(o_dxtldyn(ntraciso))
183	ALLOCATE(o_dxtcon(ntraciso))
184	ALLOCATE(o_dxtlsc(ntraciso))
185	ALLOCATE(o_dxteva(ntraciso))
186	ALLOCATE(o_dxtajs(ntraciso))
187	ALLOCATE(o_dxtvdf(ntraciso))
188	ALLOCATE(o_dxtthe(ntraciso))
189	ALLOCATE(o_dxtch4(ntraciso))
190	if (iso_HTO.gt.0) then
191	ALLOCATE(o_dxtprod_nucl(ntraciso))
192	ALLOCATE(o_dxtcosmo(ntraciso))
193	ALLOCATE(o_dxtdecroiss(ntraciso))
194	endif
195	#endif
196
197	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD, klev /)
198
199	phys_out_filenames(1) = 'histmth'
200	phys_out_filenames(2) = 'histday'
201	phys_out_filenames(3) = 'histhf6h'
202	phys_out_filenames(4) = 'histhf3h'
203	phys_out_filenames(5) = 'histhf3hm'
204	phys_out_filenames(6) = 'histstn'
205	phys_out_filenames(7) = 'histmthNMC'
206	phys_out_filenames(8) = 'histdayNMC'
207	phys_out_filenames(9) = 'histhfNMC'
208	phys_out_filenames(10)= 'histstrataer'
209
210	type_ecri(1) = 'ave(X)'
211	type_ecri(2) = 'ave(X)'
212	type_ecri(3) = 'inst(X)'
213	type_ecri(4) = 'inst(X)'
214	type_ecri(5) = 'ave(X)'
215	type_ecri(6) = 'inst(X)'
216	type_ecri(7) = 'inst(X)'
217	type_ecri(8) = 'inst(X)'
218	type_ecri(9) = 'inst(X)'
219	type_ecri(10)= 'ave(X)'
220
221	clef_files(1) = ok_mensuel
222	clef_files(2) = ok_journe
223	clef_files(3) = ok_hf
224	clef_files(4) = ok_instan
225	clef_files(5) = ok_LES
226	clef_files(6) = ok_instan
227	clef_files(7) = ok_histNMC(1)
228	clef_files(8) = ok_histNMC(2)
229	clef_files(9) = ok_histNMC(3)
230	clef_files(10)= CPPKEY_StratAer
231
232	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
233	clef_stations(1) = .FALSE.
234	clef_stations(2) = .FALSE.
235	clef_stations(3) = .FALSE.
236	clef_stations(4) = .FALSE.
237	clef_stations(5) = .FALSE.
238	clef_stations(6) = .FALSE.
239	clef_stations(7) = .FALSE.
240	clef_stations(8) = .FALSE.
241	clef_stations(9) = .FALSE.
242	clef_stations(10)= .FALSE.
243
244	lev_files(1) = lev_histmth
245	lev_files(2) = lev_histday
246	lev_files(3) = lev_histhf
247	lev_files(4) = lev_histins
248	lev_files(5) = lev_histLES
249	lev_files(6) = lev_histins
250	lev_files(7) = levout_histNMC(1)
251	lev_files(8) = levout_histNMC(2)
252	lev_files(9) = levout_histNMC(3)
253	lev_files(10)= 5
254
255	ecrit_files(1) = ecrit_mth
256	ecrit_files(2) = ecrit_day
257	ecrit_files(3) = ecrit_hf
258	ecrit_files(4) = ecrit_ins
259	ecrit_files(5) = ecrit_LES
260	ecrit_files(6) = ecrit_ins
261	ecrit_files(7) = freq_outNMC(1)
262	ecrit_files(8) = freq_outNMC(2)
263	ecrit_files(9) = freq_outNMC(3)
264	ecrit_files(10)= ecrit_mth
265
266	!! Lectures des parametres de sorties dans physiq.def
267
268	CALL getin('phys_out_regfkey',phys_out_regfkey)
269	CALL getin('phys_out_lonmin',phys_out_lonmin)
270	CALL getin('phys_out_lonmax',phys_out_lonmax)
271	CALL getin('phys_out_latmin',phys_out_latmin)
272	CALL getin('phys_out_latmax',phys_out_latmax)
273	phys_out_levmin(:)=levmin(:)
274	CALL getin('phys_out_levmin',levmin)
275	phys_out_levmax(:)=levmax(:)
276	CALL getin('phys_out_levmax',levmax)
277	CALL getin('phys_out_filenames',phys_out_filenames)
278	phys_out_filekeys(:)=clef_files(:)
279	CALL getin('phys_out_filekeys',clef_files)
280	phys_out_filestations(:)=clef_stations(:)
281	CALL getin('phys_out_filestations',clef_stations)
282	phys_out_filelevels(:)=lev_files(:)
283	CALL getin('phys_out_filelevels',lev_files)
284	CALL getin('phys_out_filetimesteps',chtimestep)
285	phys_out_filetypes(:)=type_ecri(:)
286	CALL getin('phys_out_filetypes',type_ecri)
287
288	type_ecri_files(:)=type_ecri(:)
289
290	! if (ok_all_xml) phys_out_filelevels = 999
291
292	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
293	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
294	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
295	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
296	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
297	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
298	WRITE(lunout,*)'phys_out_filekeys=',clef_files
299	WRITE(lunout,*)'phys_out_filestations=',clef_stations
300	WRITE(lunout,*)'phys_out_filelevels=',lev_files
301	WRITE(lunout,*)'phys_out_regfkey=',phys_out_regfkey
302
303	! A noter pour
304	! l heure initiale - dans les fichiers histoire hist* - on met comme
305	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
306	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
307	! par annee (IM).
308
309	idayref = day_ref
310	IF (klon_glo==1) THEN
311	! current_time (used to compute hour) is updated at the begining of
312	! the physics; to set the correct outputs "initial time" we thus
313	! have to use (hour-dtphys).
314	CALL ymds2ju(annee_ref, 1, idayref, hour-pdtphys, zjulian)
315	print *,'phys_output_mod: annee,iday,hour,zjulian=',annee_ref,idayref, hour, zjulian
316	ELSE
317	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
318	CALL ymds2ju(annee_ref, 1, day_ini, start_time*rday, zjulian_start)
319	ENDIF
320
321	IF (using_xios) THEN
322	! ug R\'eglage du calendrier xios
323	!Temps julian => an, mois, jour, heure
324	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
325	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
326	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
327	ini_mois, ini_jour, ini_heure )
328	ENDIF
329
330	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
331	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
332	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
333	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
334
335	zdtime_moy = dtime ! Frequence ou l on moyenne
336
337
338	ecrit_files(7) = ecrit_files(1)
339	ecrit_files(8) = ecrit_files(2)
340	ecrit_files(9) = ecrit_files(3)
341
342	DO iff=1,nfiles
343
344	! Calculate ecrit_files for all files
345	IF ( chtimestep(iff)=='Default' ) THEN
346	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
347	! ...)*86400.
348	ecrit_files(iff)=ecrit_files(iff)*86400.
349	ELSE IF (chtimestep(iff)=='-1') THEN
350	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
351	PRINT*,'months length'
352	ecrit_files(iff)=-1.
353	ELSE
354	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
355	ENDIF
356
357	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
358	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
359
360
361	IF (using_xios) THEN
362	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
363	IF (.not. ok_all_xml) THEN
364	IF (prt_level >= 10) THEN
365	PRINT*,'phys_output_open: CALL wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
366	ENDIF
367	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
368	ENDIF
369
370	!!! Declaration des axes verticaux de chaque fichier:
371	IF (prt_level >= 10) THEN
372	PRINT*,'phys_output_open: Declare vertical axes for each file'
373	ENDIF
374
375	IF (iff<=6.OR.iff==10) THEN
376	CALL wxios_add_vaxis("presnivs", &
377	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
378	CALL wxios_add_vaxis("presinter", &
379	klev + 1, presinter(1:klev+1))
380	CALL wxios_add_vaxis("Ahyb", &
381	levmax(iff) - levmin(iff) + 1, aps(levmin(iff):levmax(iff)), positif='down', &
382	bnds=Ahyb_bounds(levmin(iff):levmax(iff),:))
383	CALL wxios_add_vaxis("Bhyb", &
384	levmax(iff) - levmin(iff) + 1, bps(levmin(iff):levmax(iff)), positif='down', &
385	bnds=Bhyb_bounds(levmin(iff):levmax(iff),:))
386	CALL wxios_add_vaxis("klev", levmax(iff) - levmin(iff) + 1, &
387	lev_index(levmin(iff):levmax(iff)))
388	CALL wxios_add_vaxis("klevp1", klev+1, &
389	lev_index(1:klev+1))
390	CALL wxios_add_vaxis("bnds", 2, (/1.,2./))
391
392	CALL wxios_add_vaxis("Alt", &
393	levmax(iff) - levmin(iff) + 1, pseudoalt)
394
395	! wl1_sun/wl2_sun: minimum/maximum bound of wavelength (in um)
396	SELECT CASE(NSW)
397	CASE(6)
398	wl1_sun(1:6) = [0.180, 0.250, 0.440, 0.690, 1.190, 2.380]
399	wl2_sun(1:6) = [0.250, 0.440, 0.690, 1.190, 2.380, 4.000]
400	CASE(2)
401	wl1_sun(1:2) = [0.250, 0.690]
402	wl2_sun(1:2) = [0.690, 4.000]
403	END SELECT
404
405	DO ISW=1, NSW
406	wn1_sun(ISW)=1.e+6/wl1_sun(ISW)
407	wn2_sun(ISW)=1.e+6/wl2_sun(ISW)
408	spbnds_sun(ISW,1)=wn2_sun(ISW)
409	spbnds_sun(ISW,2)=wn1_sun(ISW)
410	spectband(ISW)=(wn1_sun(ISW)+wn2_sun(ISW))/2
411	ENDDO
412
413	!!! ajout axe vertical spectband : solar band number
414	CALL wxios_add_vaxis("spectband", NSW, spectband, positif='down')
415	ELSE
416	! NMC files
417	CALL wxios_add_vaxis("plev", &
418	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
419	ENDIF
420	ENDIF !using_xios
421
422	IF (clef_files(iff)) THEN
423	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
424	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
425	IF (phys_out_regfkey(iff)) THEN
426	imin_ins=1
427	imax_ins=nbp_lon
428	jmin_ins=1
429	jmax_ins=jjmp1
430
431	! correction abderr
432	DO i=1,nbp_lon
433	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
434	IF (io_lon(i)<=phys_out_lonmin(iff)) imin_ins=i
435	IF (io_lon(i)<=phys_out_lonmax(iff)) imax_ins=i+1
436	ENDDO
437
438	DO j=1,jjmp1
439	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
440	IF (io_lat(j)>=phys_out_latmin(iff)) jmax_ins=j+1
441	IF (io_lat(j)>=phys_out_latmax(iff)) jmin_ins=j
442	ENDDO
443
444	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
445	imin_ins,imax_ins,jmin_ins,jmax_ins
446	WRITE(lunout,*)'longitudes : ', &
447	io_lon(imin_ins),io_lon(imax_ins), &
448	'latitudes : ', &
449	io_lat(jmax_ins),io_lat(jmin_ins)
450
451	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
452	imin_ins,imax_ins-imin_ins+1, &
453	jmin_ins,jmax_ins-jmin_ins+1, &
454	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
455	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
456	!IM fichiers stations
457	ELSE IF (clef_stations(iff)) THEN
458
459	IF (prt_level >= 10) THEN
460	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
461	ENDIF
462
463	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
464	phys_out_filenames(iff), &
465	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
466	ELSE
467
468	IF (prt_level >= 10) THEN
469	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
470	ENDIF
471
472	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
473	dtime,nhorim(iff),nid_files(iff))
474	ENDIF
475
476	#ifndef CPP_IOIPSL_NO_OUTPUT
477	IF (iff<=6.OR.iff==10) THEN
478	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
479	levmax(iff) - levmin(iff) + 1, &
480	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
481	!!!! Composantes de la coordonnee sigma-hybride
482	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
483	levmax(iff) - levmin(iff) + 1,aps,nvertap(iff))
484
485	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
486	levmax(iff) - levmin(iff) + 1,bps,nvertbp(iff))
487
488	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
489	levmax(iff) - levmin(iff) + 1,pseudoalt,nvertAlt(iff))
490
491	ELSE
492	! NMC files
493	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
494	levmax(iff) - levmin(iff) + 1, &
495	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
496	ENDIF
497	#endif
498
499	ENDIF ! clef_files
500
501	itr = 0
502	DO iq = 1, nqtot
503	IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
504	itr = itr + 1
505	dn = 'd'//TRIM(tracers(iq)%name)//'_'
506
507	flag = [1, 5, 5, 5, 10, 10, 11, 11, 11, 11]
508	lnam = 'Tracer '//TRIM(tracers(iq)%longName)
509	tnam = TRIM(tracers(iq)%name); o_trac (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
510
511	flag = [4, 7, 7, 7, 10, 10, 11, 11, 11, 11]
512	lnam = 'Tendance tracer '//TRIM(tracers(iq)%longName)
513	tnam = TRIM(dn)//'vdf'; o_dtr_vdf (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
514
515	flag = [5, 7, 7, 7, 10, 10, 11, 11, 11, 11]
516	tnam = TRIM(dn)//'the'; o_dtr_the (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
517	tnam = TRIM(dn)//'con'; o_dtr_con (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
518
519	flag = [7, 7, 7, 7, 10, 10, 11, 11, 11, 11]
520	tnam = TRIM(dn)//'lessi_impa'; o_dtr_lessi_impa(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
521	tnam = TRIM(dn)//'lessi_nucl'; o_dtr_lessi_nucl(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
522	tnam = TRIM(dn)//'insc'; o_dtr_insc (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
523	tnam = TRIM(dn)//'bcscav'; o_dtr_bcscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
524	tnam = TRIM(dn)//'evapls'; o_dtr_evapls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
525	tnam = TRIM(dn)//'ls'; o_dtr_ls (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
526	tnam = TRIM(dn)//'trsp'; o_dtr_trsp (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
527	tnam = TRIM(dn)//'sscav'; o_dtr_sscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
528	tnam = TRIM(dn)//'sat'; o_dtr_sat (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
529	tnam = TRIM(dn)//'uscav'; o_dtr_uscav (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
530
531	lnam = 'tracer tendency dry deposition'//TRIM(tracers(iq)%longName)
532	tnam = 'cum'//TRIM(dn)//'dry'; o_dtr_dry (itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
533
534	flag = [1, 4, 10, 10, 10, 10, 11, 11, 11, 11]
535	lnam = 'Cumulated tracer '//TRIM(tracers(iq)%longName)
536	tnam = 'cum'//TRIM(tracers(iq)%name); o_trac_cum(itr) = ctrl_out(flag, tnam, lnam, "-", [('',i=1,nfiles)])
537	ENDDO
538
539	ENDDO ! iff
540
541	#ifdef ISO
542	write(,) 'phys_output_mid 589'
543	do ixt=1,ntraciso
544	outiso = TRIM(isoName(ixt))
545	i = INDEX(outiso, '_', .TRUE.)
546	outiso = outiso(1:i-1)//outiso(i+1:LEN_TRIM(outiso))
547
548	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/(s*m2)'
549	o_xtprecip(ixt)=ctrl_out(flag, 'precip'//TRIM(outiso), 'Precip Totale liq+sol', unit, [('',i=1,nfiles)])
550	o_xtpluc (ixt)=ctrl_out(flag, 'pluc'//TRIM(outiso), 'Convective Precip.', unit, [('',i=1,nfiles)])
551
552	flag = [1, 1, 1, 10, 10, 10, 11, 11, 11, 11]
553	o_xtplul (ixt)=ctrl_out(flag, 'plul'//TRIM(outiso), 'Large-scale Precip.', unit, [('',i=1,nfiles)])
554	o_xtevap (ixt)=ctrl_out(flag, 'evap'//TRIM(outiso), 'Evaporat.', unit, [('',i=1,nfiles)])
555
556	! ajout Camille 8 mai 2023
557	flag = [1, 6, 10, 10, 10, 10, 11, 11, 11, 11]
558	o_xtevap_srf (ixt,1)=ctrl_out(flag, 'evap_ter'//TRIM(outiso), 'Evap sfc'//clnsurf(1), unit, [('',i=1,nfiles)])
559	o_xtevap_srf (ixt,2)=ctrl_out(flag, 'evap_lic'//TRIM(outiso), 'Evap sfc'//clnsurf(2), unit, [('',i=1,nfiles)])
560	o_xtevap_srf (ixt,3)=ctrl_out(flag, 'evap_oce'//TRIM(outiso), 'Evap sfc'//clnsurf(3), unit, [('',i=1,nfiles)])
561	o_xtevap_srf (ixt,4)=ctrl_out(flag, 'evap_sic'//TRIM(outiso), 'Evap sfc'//clnsurf(4), unit, [('',i=1,nfiles)])
562
563	flag = [2, 3, 4, 10, 10, 10, 11, 11, 11, 11]; unit = 'kg/kg'
564	o_xtovap (ixt)=ctrl_out(flag, 'ovap'//TRIM(outiso), 'Specific humidity', unit, [('',i=1,nfiles)])
565	o_xtoliq (ixt)=ctrl_out(flag, 'oliq'//TRIM(outiso), 'Liquid water', unit, [('',i=1,nfiles)])
566	o_xtcond (ixt)=ctrl_out(flag, 'ocond'//TRIM(outiso), 'Condensed water', unit, [('',i=1,nfiles)])
567
568	flag = [1, 1, 1, 10, 5, 10, 11, 11, 11, 11]; unit = 'kg/m2/s'
569	o_xtrunoff_diag (ixt)=ctrl_out(flag, 'runoffland'//TRIM(outiso), 'Run-off rate land for bucket', unit, [('',i=1,nfiles)])
570
571	flag = [4, 10, 10, 10, 10, 10, 11, 11, 11, 11]; unit = '(kg/kg)/s'
572	o_dxtdyn (ixt)=ctrl_out(flag, 'dqdyn'//TRIM(outiso), 'Dynamics dQ', unit, [('',i=1,nfiles)])
573	o_dxtldyn (ixt)=ctrl_out(flag, 'dqldyn'//TRIM(outiso), 'Dynamics dQL', unit, [('',i=1,nfiles)])
574	o_dxtcon (ixt)=ctrl_out(flag, 'dqcon'//TRIM(outiso), 'Convection dQ', unit, [('',i=1,nfiles)])
575	o_dxteva (ixt)=ctrl_out(flag, 'dqeva'//TRIM(outiso), 'Reevaporation dQ', unit, [('',i=1,nfiles)])
576	o_dxtlsc (ixt)=ctrl_out(flag, 'dqlsc'//TRIM(outiso), 'Condensation dQ', unit, [('',i=1,nfiles)])
577	o_dxtajs (ixt)=ctrl_out(flag, 'dqajs'//TRIM(outiso), 'Dry adjust. dQ', unit, [('',i=1,nfiles)])
578	o_dxtvdf (ixt)=ctrl_out(flag, 'dqvdf'//TRIM(outiso), 'Boundary-layer dQ', unit, [('',i=1,nfiles)])
579	o_dxtthe (ixt)=ctrl_out(flag, 'dqthe'//TRIM(outiso), 'Thermal dQ', unit, [('',i=1,nfiles)])
580
581	IF(ok_qch4) o_dxtch4(ixt)=ctrl_out(flag, 'dqch4'//TRIM(outiso), 'H2O due to CH4 oxidation & photolysis', &
582	unit, [('',i=1,nfiles)])
583	IF(ixt == iso_HTO) THEN
584	o_dxtprod_nucl(ixt)=ctrl_out(flag, 'dqprodnucl'//TRIM(outiso), 'dHTO/dt due to nuclear production', &
585	unit, [('',i=1,nfiles)])
586	o_dxtcosmo (ixt)=ctrl_out(flag, 'dqcosmo'//TRIM(outiso), 'dHTO/dt due to cosmogenic production', &
587	unit, [('',i=1,nfiles)])
588	o_dxtdecroiss (ixt)=ctrl_out(flag, 'dqdecroiss'//TRIM(outiso), 'dHTO/dt due to radiative destruction', &
589	unit, [('',i=1,nfiles)])
590	END IF
591	enddo !do ixt=1,niso
592	write(,) 'phys_output_mid 596'
593	#endif
594
595
596	! Updated write frequencies due to phys_out_filetimesteps.
597	! Write frequencies are now in seconds.
598	ecrit_mth = ecrit_files(1)
599	ecrit_day = ecrit_files(2)
600	ecrit_hf = ecrit_files(3)
601	ecrit_ins = ecrit_files(4)
602	ecrit_LES = ecrit_files(5)
603	ecrit_ins = ecrit_files(6)
604
605	IF (prt_level >= 10) THEN
606	WRITE(lunout,*)'swaerofree_diag=',swaerofree_diag
607	WRITE(lunout,*)'swaero_diag=',swaero_diag
608	WRITE(lunout,*)'dryaod_diag=',dryaod_diag
609	WRITE(lunout,*)'ok_4xCO2atm=',ok_4xCO2atm
610	WRITE(lunout,*)'phys_output_open: ends here'
611	ENDIF
612
613	END SUBROUTINE phys_output_open
614
615	SUBROUTINE convers_timesteps(str,dtime,timestep)
616
617	use ioipsl
618	USE phys_cal_mod
619	USE time_phylmdz_mod, ONLY: day_ref, annee_ref
620	USE print_control_mod, ONLY: lunout
621
622	IMPLICIT NONE
623
624	CHARACTER(LEN=20) :: str
625	CHARACTER(LEN=10) :: type
626	INTEGER :: ipos,il
627	real :: ttt,xxx,timestep,dayseconde,dtime
628	parameter (dayseconde=86400.)
629
630	ipos=scan(str,'0123456789.',.TRUE.)
631
632	il=len_trim(str)
633	WRITE(lunout,*) "ipos = ", ipos
634	WRITE(lunout,*) "il = ", il
635	IF (ipos == 0) CALL abort_physic("convers_timesteps", "bad str", 1)
636	read(str(1:ipos),*) ttt
637	WRITE(lunout,*)ttt
638	type=str(ipos+1:il)
639
640	IF ( il == ipos ) THEN
641	type='day'
642	ENDIF
643
644	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
645	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) THEN
646	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
647	timestep = ttt * dayseconde * mth_len
648	ENDIF
649	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
650	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
651	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
652	IF ( type == 'TS' ) timestep = ttt * dtime
653
654	WRITE(lunout,*)'type = ',type
655	WRITE(lunout,*)'nb j/h/m = ',ttt
656	WRITE(lunout,*)'timestep(s)=',timestep
657
658	END SUBROUTINE convers_timesteps
659
660	END MODULE phys_output_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format