Context Navigation

cv_driver.F90 @ 5144

Last change on this file since 5144 was 5144, checked in by abarral, 3 months ago
Put YOMCST.h into modules
Property svn:keywords set to `Id`
File size: 43.5 KB

Line
1
2	! $Header$
3
4	SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, &
5	tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, &
6	cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, &
7	wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & !
8	! RomP
9	evap1, ep1, epmlmmm1, eplamm1, & ! RomP
10	wdtraina1, wdtrainm1, & ! RomP
11	epmax_diag1 & ! epmax_cape
12	#ifdef ISO
13	,xt1,fxt1 &
14	,xtprecip1,xtvprecip1 &
15	, xtevap1,xtclw1,xtwdtraina1 &
16	#ifdef DIAGISO
17	, water1,xtwater1,qp1,xtp1 &
18	, fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
19	, fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
20	, f_detrainement1,q_detrainement1,xt_detrainement1 &
21	#endif
22	#endif
23	)
24
25	USE dimphy
26	#ifdef ISO
27	USE infotrac_phy, ONLY: ntraciso=>ntiso,niso,itZonIso,nzone
28	USE isotopes_mod, ONLY: iso_eau,iso_HDO,ridicule,bidouille_anti_divergence
29	#ifdef ISOVERIF
30	USE isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, &
31	iso_verif_egalite_choix,iso_verif_aberrant_choix, &
32	iso_verif_aberrant, iso_verif_positif,iso_verif_positif_nostop
33	#endif
34	#ifdef ISOTRAC
35	USE isotrac_mod, ONLY: option_traceurs,izone_ddft,izone_revap, &
36	& izone_poubelle, index_zone,option_tmin,izone_cond
37	#ifdef ISOVERIF
38	USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, &
39	& iso_verif_trac_masse_vect
40	USE isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille
41	#endif
42	#endif
43	#endif
44	USE lmdz_cv30, ONLY: cv30_param, cv30_prelim, cv30_feed, cv30_undilute1, cv30_trigger, cv30_compress, cv30_undilute2, &
45	cv30_closure, cv30_epmax_fn_cape, cv30_mixing, cv30_unsat, cv30_yield, cv30_tracer, cv30_uncompress
46	USE lmdz_cv, ONLY: cv_param, cv_prelim, cv_feed, cv_undilute1, cv_trigger, cv_compress, &
47	cv_undilute2, cv_closure, cv_mixing, cv_unsat, cv_yield, cv_uncompress
48
49	IMPLICIT NONE
50
51	! .............................START PROLOGUE............................
52
53
54	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a
55	! "1" appended.
56	! The "1" is removed for the corresponding compressed (local) variables.
57
58	! PARAMETERS:
59	! Name Type Usage Description
60	! ---------- ---------- ------- ----------------------------
61
62	! len Integer Input first (i) dimension
63	! nd Integer Input vertical (k) dimension
64	! ndp1 Integer Input nd + 1
65	! ntra Integer Input number of tracors
66	! iflag_con Integer Input version of convect (3/4)
67	! t1 Real Input temperature
68	! q1 Real Input specific hum
69	! qs1 Real Input sat specific hum
70	! u1 Real Input u-wind
71	! v1 Real Input v-wind
72	! tra1 Real Input tracors
73	! p1 Real Input full level pressure
74	! ph1 Real Input half level pressure
75	! iflag1 Integer Output flag for Emanuel conditions
76	! ft1 Real Output temp tend
77	! fq1 Real Output spec hum tend
78	! fu1 Real Output u-wind tend
79	! fv1 Real Output v-wind tend
80	! ftra1 Real Output tracor tend
81	! precip1 Real Output precipitation
82	! VPrecip1 Real Output vertical profile of
83	! precipitations
84	! cbmf1 Real Output cloud base mass flux
85	! sig1 Real In/Out section adiabatic updraft
86	! w01 Real In/Out vertical velocity within adiab
87	! updraft
88	! delt Real Input time step
89	! Ma1 Real Output mass flux adiabatic updraft
90	! upwd1 Real Output total upward mass flux
91	! (adiab+mixed)
92	! dnwd1 Real Output saturated downward mass flux
93	! (mixed)
94	! dnwd01 Real Output unsaturated downward mass flux
95	! qcondc1 Real Output in-cld mixing ratio of
96	! condensed water
97	! wd1 Real Output downdraft velocity scale for
98	! sfc fluxes
99	! cape1 Real Output CAPE
100
101	! wdtrainA1 Real Output precipitation detrained from
102	! adiabatic draught;
103	! used in tracer transport (cvltr)
104	! wdtrainM1 Real Output precipitation detrained from mixed
105	! draughts;
106	! used in tracer transport (cvltr)
107	! da1 Real Output used in tracer transport (cvltr)
108	! phi1 Real Output used in tracer transport (cvltr)
109	! mp1 Real Output used in tracer transport (cvltr)
110
111	! phi21 Real Output used in tracer transport (cvltr)
112
113	! d1a1 Real Output used in tracer transport (cvltr)
114	! dam1 Real Output used in tracer transport (cvltr)
115
116	! evap1 Real Output
117	! ep1 Real Output
118	! sij1 Real Output
119	! elij1 Real Output
120
121	! S. Bony, Mar 2002:
122	! * Several modules corresponding to different physical processes
123	! * Several versions of convect may be used:
124	! - iflag_con=3: version lmd (previously named convect3)
125	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
126	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
127	! S. Bony, Oct 2002:
128	! * Vectorization of convect3 (ie version lmd)
129
130	! ..............................END PROLOGUE.............................
131
132
133	! Input
134	INTEGER len
135	INTEGER nd
136	INTEGER ndp1
137	INTEGER noff
138	INTEGER iflag_con
139	INTEGER ntra
140	REAL delt
141	REAL t1(len, nd)
142	REAL q1(len, nd)
143	REAL qs1(len, nd)
144	REAL u1(len, nd)
145	REAL v1(len, nd)
146	REAL tra1(len, nd, ntra)
147	REAL p1(len, nd)
148	REAL ph1(len, ndp1)
149
150	! Output
151	INTEGER iflag1(len)
152	REAL ft1(len, nd)
153	REAL fq1(len, nd)
154	REAL fu1(len, nd)
155	REAL fv1(len, nd)
156	REAL ftra1(len, nd, ntra)
157	REAL precip1(len)
158	REAL cbmf1(len)
159	REAL sig1(klon, klev)
160	REAL w01(klon, klev)
161	REAL vprecip1(len, nd+1)
162	REAL evap1(len, nd) !RomP
163	REAL ep1(len, nd) !RomP
164	REAL ma1(len, nd)
165	REAL upwd1(len, nd)
166	REAL dnwd1(len, nd)
167	REAL dnwd01(len, nd)
168
169	REAL qcondc1(len, nd) ! cld
170	REAL wd1(len) ! gust
171	REAL cape1(len)
172
173	! RomP >>>
174	REAL wdtraina1(len, nd), wdtrainm1(len, nd)
175	REAL sij1(len, nd, nd), elij1(len, nd, nd)
176	REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd)
177
178	REAL phi21(len, nd, nd)
179	REAL d1a1(len, nd), dam1(len, nd)
180	REAL epmlmmm1(len, nd, nd), eplamm1(len, nd)
181	! RomP <<<
182	REAL epmax_diag1 (len) ! epmax_cape
183
184
185	#ifdef ISO
186	REAL xt1(ntraciso,len,nd)
187	REAL fxt1(ntraciso,len,nd)
188	REAL xtprecip1(ntraciso,len)
189	REAL xtvprecip1(ntraciso,len,nd+1)
190	REAL xtevap1(ntraciso,len,nd)
191	REAL xtwdtraina1(ntraciso,len,nd)
192	REAL xtelij1(ntraciso,len, nd, nd)
193	#ifdef DIAGISO
194	REAL water1(len,nd)
195	REAL xtwater1(ntraciso,len,nd)
196	REAL qp1(len,nd),xtp1(ntraciso,len,nd)
197	REAL fq_detrainement1(len,nd)
198	REAL f_detrainement1(len,nd)
199	REAL q_detrainement1(len,nd)
200	REAL fq_ddft1(len,nd)
201	REAL fq_fluxmasse1(len,nd)
202	REAL fq_evapprecip1(len,nd)
203	REAL fxt_detrainement1(ntraciso,len,nd)
204	REAL xt_detrainement1(ntraciso,len,nd)
205	REAL fxt_ddft1(ntraciso,len,nd)
206	REAL fxt_fluxmasse1(ntraciso,len,nd)
207	REAL fxt_evapprecip1(ntraciso,len,nd)
208	#endif
209	#ifdef ISOVERIF
210	REAL deltaD
211	#endif
212	#endif
213
214	! -------------------------------------------------------------------
215	! Original Prologue by Kerry Emanuel.
216	! -------------------------------------------------------------------
217	! --- ARGUMENTS
218	! -------------------------------------------------------------------
219	! --- On input:
220
221	! t: Array of absolute temperature (K) of dimension ND, with first
222	! index corresponding to lowest model level. Note that this array
223	! will be altered by the SUBROUTINE if dry convective adjustment
224	! occurs and if IPBL is not equal to 0.
225
226	! q: Array of specific humidity (gm/gm) of dimension ND, with first
227	! index corresponding to lowest model level. Must be defined
228	! at same grid levels as T. Note that this array will be altered
229	! if dry convective adjustment occurs and if IPBL is not equal to 0.
230
231	! qs: Array of saturation specific humidity of dimension ND, with first
232	! index corresponding to lowest model level. Must be defined
233	! at same grid levels as T. Note that this array will be altered
234	! if dry convective adjustment occurs and if IPBL is not equal to 0.
235
236	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
237	! index corresponding with the lowest model level. Defined at
238	! same levels as T. Note that this array will be altered if
239	! dry convective adjustment occurs and if IPBL is not equal to 0.
240
241	! v: Same as u but for meridional velocity.
242
243	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
244	! where NTRA is the number of different tracers. If no
245	! convective tracer transport is needed, define a dummy
246	! input array of dimension (ND,1). Tracers are defined at
247	! same vertical levels as T. Note that this array will be altered
248	! if dry convective adjustment occurs and if IPBL is not equal to 0.
249
250	! p: Array of pressure (mb) of dimension ND, with first
251	! index corresponding to lowest model level. Must be defined
252	! at same grid levels as T.
253
254	! ph: Array of pressure (mb) of dimension ND+1, with first index
255	! corresponding to lowest level. These pressures are defined at
256	! levels intermediate between those of P, T, Q and QS. The first
257	! value of PH should be greater than (i.e. at a lower level than)
258	! the first value of the array P.
259
260	! nl: The maximum number of levels to which convection can penetrate, plus
261	! 1.
262	! NL MUST be less than or equal to ND-1.
263
264	! delt: The model time step (sec) between calls to CONVECT
265
266	! ----------------------------------------------------------------------------
267	! --- On Output:
268
269	! iflag: An output integer whose value denotes the following:
270	! VALUE INTERPRETATION
271	! ----- --------------
272	! 0 Moist convection occurs.
273	! 1 Moist convection occurs, but a CFL condition
274	! on the subsidence warming is violated. This
275	! does not cause the scheme to terminate.
276	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
277	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
278	! 4 No moist convection; atmosphere is not
279	! unstable
280	! 6 No moist convection because ihmin le minorig.
281	! 7 No moist convection because unreasonable
282	! parcel level temperature or specific humidity.
283	! 8 No moist convection: lifted condensation
284	! level is above the 200 mb level.
285	! 9 No moist convection: cloud base is higher
286	! then the level NL-1.
287
288	! ft: Array of temperature tendency (K/s) of dimension ND, defined at
289	! same
290	! grid levels as T, Q, QS and P.
291
292	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
293	! defined at same grid levels as T, Q, QS and P.
294
295	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
296	! defined at same grid levels as T.
297
298	! fv: Same as FU, but for forcing of meridional velocity.
299
300	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
301	! second, defined at same levels as T. Dimensioned (ND,NTRA).
302
303	! precip: Scalar convective precipitation rate (mm/day).
304
305	! VPrecip: Vertical profile of convective precipitation (kg/m2/s).
306
307	! wd: A convective downdraft velocity scale. For use in surface
308	! flux parameterizations. See convect.ps file for details.
309
310	! tprime: A convective downdraft temperature perturbation scale (K).
311	! For use in surface flux parameterizations. See convect.ps
312	! file for details.
313
314	! qprime: A convective downdraft specific humidity
315	! perturbation scale (gm/gm).
316	! For use in surface flux parameterizations. See convect.ps
317	! file for details.
318
319	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
320	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
321	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
322	! by the calling program between calls to CONVECT.
323
324	! det: Array of detrainment mass flux of dimension ND.
325
326	! -------------------------------------------------------------------
327
328	! Local arrays
329
330
331	INTEGER i, k, n, il, j
332	INTEGER icbmax
333	INTEGER nk1(klon)
334	INTEGER icb1(klon)
335	INTEGER inb1(klon)
336	INTEGER icbs1(klon)
337
338	REAL plcl1(klon)
339	REAL tnk1(klon)
340	REAL qnk1(klon)
341	REAL gznk1(klon)
342	REAL pnk1(klon)
343	REAL qsnk1(klon)
344	REAL pbase1(klon)
345	REAL buoybase1(klon)
346
347	REAL lv1(klon, klev)
348	REAL cpn1(klon, klev)
349	REAL tv1(klon, klev)
350	REAL gz1(klon, klev)
351	REAL hm1(klon, klev)
352	REAL h1(klon, klev)
353	REAL tp1(klon, klev)
354	REAL tvp1(klon, klev)
355	REAL clw1(klon, klev)
356	REAL th1(klon, klev)
357
358	#ifdef ISO
359	INTEGER ixt
360	REAL xtclw1(ntraciso,klon,klev)
361	REAL xtnk1(ntraciso,klon)
362	#endif
363
364	INTEGER ncum
365
366	! (local) compressed fields:
367
368	! ym integer nloc
369	! ym parameter (nloc=klon) ! pour l'instant
370	#define nloc klon
371	INTEGER idcum(nloc)
372	INTEGER iflag(nloc), nk(nloc), icb(nloc)
373	INTEGER nent(nloc, klev)
374	INTEGER icbs(nloc)
375	INTEGER inb(nloc), inbis(nloc)
376
377	REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc)
378	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
379	REAL u(nloc, klev), v(nloc, klev)
380	REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev)
381	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
382	REAL clw(nloc, klev)
383	REAL dph(nloc, klev)
384	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
385	REAL tvp(nloc, klev)
386	REAL sig(nloc, klev), w0(nloc, klev)
387	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
388	REAL frac(nloc), buoy(nloc, klev)
389	REAL cape(nloc)
390	REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev)
391	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
392	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
393	REAL sij(nloc, klev, klev), elij(nloc, klev, klev)
394	REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev)
395	REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev)
396	REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev)
397	REAL fu(nloc, klev), fv(nloc, klev)
398	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
399	REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev)
400	REAL tps(nloc, klev), qprime(nloc), tprime(nloc)
401	REAL precip(nloc)
402	REAL vprecip(nloc, klev+1)
403	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
404	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
405	REAL qcondc(nloc, klev) ! cld
406	REAL wd(nloc) ! gust
407
408	! RomP >>>
409	REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev)
410	REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev)
411	REAL phi2(nloc, klev, klev)
412	REAL d1a(nloc, klev), dam(nloc, klev)
413	REAL wdtraina(nloc, klev), wdtrainm(nloc, klev)
414	REAL sigd(nloc)
415	! RomP <<<
416	REAL epmax_diag(nloc) ! epmax_cape
417	#ifdef ISO
418	REAL xt(ntraciso,nloc,klev)
419	REAL xtnk(ntraciso,nloc)
420	REAL xtclw(ntraciso,nloc,klev)
421	REAL xtp(ntraciso,nloc,klev)
422	REAL xtent(ntraciso,nloc,klev,klev)
423	REAL xtelij(ntraciso,nloc,klev,klev)
424	! real xtep(ntraciso,nloc,klev) ! le 7 mai: on supprime xtep
425	REAL xtwater(ntraciso,nloc,klev)
426	REAL xtevap(ntraciso,nloc,klev)
427	REAL fxt(ntraciso,nloc,klev)
428	REAL xtprecip(ntraciso,nloc)
429	REAL xtvprecip(ntraciso,nloc,klev+1)
430	REAL xtwdtraina(ntraciso,nloc,klev)
431	#ifdef DIAGISO
432	REAL fxt_detrainement(ntraciso,nloc,klev)
433	REAL fxt_fluxmasse(ntraciso,nloc,klev)
434	REAL fxt_evapprecip(ntraciso,nloc,klev)
435	REAL fxt_ddft(ntraciso,nloc,klev)
436	REAL fq_detrainement(nloc,klev)
437	REAL f_detrainement(nloc,klev)
438	REAL q_detrainement(nloc,klev)
439	REAL xt_detrainement(ntraciso,nloc,klev)
440	REAL fq_fluxmasse(nloc,klev)
441	REAL fq_evapprecip(nloc,klev)
442	REAL fq_ddft(nloc,klev)
443	#endif
444	#ifdef ISOTRAC
445	INTEGER iiso,ixt_ddft,ixt_poubelle,ixt_revap
446	INTEGER izone
447	!#ifdef ISOVERIF
448	! integer iso_verif_positif_nostop
449	!#endif
450	#endif
451	#endif
452
453
454	#ifdef ISO
455	! verif
456	#ifdef ISOVERIF
457	WRITE(,) 'cv_driver 391: ENTREE dans cv_driver'
458	! WRITE(,) 'nloc=',nloc
459	IF (iso_eau.gt.0) THEN
460	do k = 1, klev
461	do i = 1, nloc
462	CALL iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
463	'cv_driver 343',errmax,errmaxrel)
464	enddo
465	enddo
466	endif !if (iso_eau.gt.0) THEN
467	IF (iso_HDO.gt.0) THEN
468	do k = 1, klev
469	do i = 1, nloc
470	IF (q1(i,k).gt.ridicule) THEN
471	CALL iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
472	'cv_driver 362')
473	endif !if (q1(i,k).gt.ridicule) THEN
474	enddo
475	enddo
476	endif !if (iso_eau.gt.0) THEN
477	#ifdef ISOTRAC
478	do k = 1, klev
479	do i = 1, klon
480	CALL iso_verif_traceur(xt1(1,i,k),'cv_driver 413')
481	enddo
482	enddo
483	#endif
484	#endif
485	! end verif
486	#endif
487
488
489	nent(:, :) = 0
490	! -------------------------------------------------------------------
491	! --- SET CONSTANTS AND PARAMETERS
492	! -------------------------------------------------------------------
493	! print *, '-> cv_driver' !jyg
494	! -- set simulation flags:
495	! (common cvflag)
496
497	CALL cv_flag(0)
498
499	! -- set thermodynamical constants:
500	! (common cvthermo)
501
502	CALL cv_thermo(iflag_con)
503
504	! -- set convect parameters
505
506	! includes microphysical parameters and parameters that
507	! control the rate of approach to quasi-equilibrium)
508	! (common cvparam)
509
510
511	IF (iflag_con==30) THEN
512	CALL cv30_param(nd, delt)
513	END IF
514
515	IF (iflag_con==4) THEN
516	CALL cv_param(nd)
517	#ifdef ISO
518	WRITE(,) 'cv_driver 454: isos pas prevus ici'
519	stop
520	#endif
521	END IF
522
523	! ---------------------------------------------------------------------
524	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
525	! ---------------------------------------------------------------------
526
527	inb(:) = 0.0
528	inb1(:) = 0.0
529	icb1(:) = 0.0
530
531	ft1(:, :) = 0.0
532	fq1(:, :) = 0.0
533	fu1(:, :) = 0.0
534	fv1(:, :) = 0.0
535	tvp1(:, :) = 0.0
536	tp1(:, :) = 0.0
537	clw1(:, :) = 0.0
538	! ym
539	clw(:, :) = 0.0
540	gz1(:, :) = 0.
541	vprecip1(:, :) = 0.
542	ma1(:, :) = 0.0
543	upwd1(:, :) = 0.0
544	dnwd1(:, :) = 0.0
545	dnwd01(:, :) = 0.0
546	qcondc1(:, :) = 0.0
547
548	ftra1(:, :, :) = 0.0
549
550	elij1(:, :, :) = 0.0
551	sij1(:, :, :) = 0.0
552
553	precip1(:) = 0.0
554	iflag1(:) = 0
555	wd1(:) = 0.0
556	cape1(:) = 0.0
557	epmax_diag1(:) = 0.0 ! epmax_cape
558
559
560	#ifdef ISOVERIF
561	#ifdef ISOTRAC
562	do k=1,klev
563	do i=1,klon
564	CALL iso_verif_traceur(xt1(1,i,k),'cv_driver 510')
565	enddo
566	enddo
567	#endif
568	#endif
569
570	#ifdef ISO
571	fxt1(:,:,:)=0.0
572	xtclw1(:,:,:)=0.0
573	xtclw(:,:,:)=0.0
574	xtvprecip1(:,:,:) = 0.
575	xtelij1(:, :, :, :) = 0.0
576	#endif
577
578	IF (iflag_con==30) THEN
579	DO il = 1, len
580	sig1(il, nd) = sig1(il, nd) + 1.
581	sig1(il, nd) = amin1(sig1(il,nd), 12.1)
582	END DO
583	END IF
584
585	! RomP >>>
586	wdtraina1(:, :) = 0.
587	wdtrainm1(:, :) = 0.
588	da1(:, :) = 0.
589	phi1(:, :, :) = 0.
590	epmlmmm1(:, :, :) = 0.
591	eplamm1(:, :) = 0.
592	mp1(:, :) = 0.
593	evap1(:, :) = 0.
594	ep1(:, :) = 0.
595	sij1(:, :, :) = 0.
596	elij1(:, :, :) = 0.
597	phi21(:, :, :) = 0.
598	d1a1(:, :) = 0.
599	dam1(:, :) = 0.
600	! RomP <<<
601	#ifdef ISO
602	xtwdtraina1(:,:,:)=0.0
603	xtevap1(:,:,:)=0.0
604	xtelij1(:,:,:,:)=0.0
605	#ifdef DIAGISO
606	xtwater1(:,:,:)=0.0
607	fxt_detrainement1(:,:,:)=0.0
608	xt_detrainement1(:,:,:)=0.0
609	fxt_ddft1(:,:,:)=0.0
610	fxt_fluxmasse1(:,:,:)=0.0
611	fxt_evapprecip1(:,:,:)=0.0
612	xtp1(:,:,:)=0.0
613	water1(:,:)=0.0
614	qp1(:,:)=0.0
615	fq_detrainement1(:,:)=0.0
616	fq_ddft1(:,:)=0.0
617	fq_fluxmasse1(:,:)=0.0
618	fq_evapprecip1(:,:)=0.0
619	#endif
620	#endif
621	! --------------------------------------------------------------------
622	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
623	! --------------------------------------------------------------------
624
625	IF (iflag_con==30) THEN
626
627	! PRINT*,'Emanuel version 30 '
628	CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na
629	, lv1, cpn1, tv1, gz1, h1, hm1, th1)
630	END IF
631
632	IF (iflag_con==4) THEN
633	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, &
634	hm1)
635	END IF
636
637	! --------------------------------------------------------------------
638	! --- CONVECTIVE FEED
639	! --------------------------------------------------------------------
640
641	IF (iflag_con==30) THEN
642	CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & !
643	! nd->na
644	, nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1 &
645	#ifdef ISO
646	,xt1,xtnk1 &
647	#endif
648	)
649	END IF
650
651	IF (iflag_con==4) THEN
652	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, &
653	iflag1, tnk1, qnk1, gznk1, plcl1)
654	END IF
655
656	! --------------------------------------------------------------------
657	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
658	! (up through ICB for convect4, up through ICB+1 for convect3)
659	! Calculates the lifted parcel virtual temperature at nk, the
660	! actual temperature, and the adiabatic liquid water content.
661	! --------------------------------------------------------------------
662
663	IF (iflag_con==30) THEN
664
665	#ifdef ISOVERIF
666	WRITE(,) 'cv_driver 593: avant cv3_undilute1'
667	do k=1,klev
668	do i=1,klon
669	IF (iso_HDO.gt.0) THEN
670	IF (q1(i,k).gt.ridicule) THEN
671	CALL iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
672	'cv_driver 502')
673	endif ! if (q1(i,k).gt.ridicule) THEN
674	endif !if (iso_HDO.gt.0) THEN
675	#ifdef ISOTRAC
676	CALL iso_verif_traceur(xt1(1,i,k),'cv_driver 601')
677	#endif
678	enddo
679	enddo
680	#endif
681
682
683	CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na
684	, tp1, tvp1, clw1, icbs1 &
685	#ifdef ISO
686	,xt1,xtclw1 &
687	#endif
688	)
689
690
691	#ifdef ISO
692	!c--debug
693	#ifdef ISOVERIF
694	WRITE(,) 'cv_driver 621: apres cv3_undilute1'
695	do k = 1, klev
696	do i = 1, klon
697	IF (iso_eau.gt.0) THEN
698	CALL iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
699	'undil1',errmax,errmaxrel)
700	CALL iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
701	'undil1',errmax,errmaxrel)
702	endif !if (iso_eau.gt.0) THEN
703	#ifdef ISOTRAC
704	CALL iso_verif_traceur(xt1(1,i,k),'cv_driver 623')
705	#endif
706	enddo
707	enddo
708	#endif
709	!WRITE(,) 'SORTIE DE CV3_UNDILUTE1'
710	#endif
711
712	END IF
713
714	IF (iflag_con==4) THEN
715	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, &
716	tvp1, clw1)
717	END IF
718
719	! -------------------------------------------------------------------
720	! --- TRIGGERING
721	! -------------------------------------------------------------------
722
723	IF (iflag_con==30) THEN
724	CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & !
725	! nd->na
726	, pbase1, buoybase1, iflag1, sig1, w01)
727	END IF
728
729	IF (iflag_con==4) THEN
730	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
731	END IF
732
733	! =====================================================================
734	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
735	! =====================================================================
736
737	ncum = 0
738	DO i = 1, len
739	IF (iflag1(i)==0) THEN
740	ncum = ncum + 1
741	idcum(ncum) = i
742	END IF
743	END DO
744
745	! PRINT*,'cv_driver : klon, ncum = ',len,ncum
746
747	IF (ncum>0) THEN
748
749	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
750	! --- COMPRESS THE FIELDS
751	! (-> vectorization over convective gridpoints)
752	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
753
754	IF (iflag_con==30) THEN
755	#ifdef ISO
756	#ifdef ISOVERIF
757	!WRITE(,) 'xt1(iso_eau,1,1),q1(1,1)=',xt1(iso_eau,1,1),q1(1,1)
758	!WRITE(,) 'xt1(iso_eau,14,1),q1(14,1)=',xt1(iso_eau,14,1),q1(14,1)
759	do k = 1, klev
760	do i = 1, nloc
761	IF (iso_eau.gt.0) THEN
762	CALL iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
763	'cv_driver 541a',errmax,errmaxrel)
764	CALL iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
765	'cv_driver 541b',errmax,errmaxrel)
766	endif ! if (iso_eau.gt.0) THEN
767	#ifdef ISOTRAC
768	CALL iso_verif_traceur(xt1(1,i,k),'cv_driver 689')
769	#endif
770	enddo
771	enddo
772	#endif
773	#endif
774
775	CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, &
776	plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, &
777	gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, &
778	w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, &
779	q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, &
780	w0 &
781	#ifdef ISO
782	,xtnk1,xt1,xtclw1 &
783	,xtnk,xt,xtclw &
784	#endif
785	)
786
787	#ifdef ISO
788	#ifdef ISOVERIF
789	WRITE(,) 'cv_driver 720: apres cv3_compress'
790	do k = 1, klev
791	do i = 1, ncum
792	IF (iso_eau.gt.0) THEN
793	CALL iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
794	'cv_driver 598',errmax,errmaxrel)
795	CALL iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
796	'cv_driver 600',errmax,errmaxrel)
797	endif ! if (iso_eau.gt.0) THEN
798	IF (iso_HDO.gt.0) THEN
799	CALL iso_verif_aberrant_choix( &
800	xt(iso_HDO,i,k),q(i,k), &
801	ridicule,deltalim,'cv_driver 735, apres compress')
802	endif !if (iso_HDO.gt.0) THEN
803	#ifdef ISOTRAC
804	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 726')
805	#endif
806	enddo
807	enddo
808	IF (iso_eau.gt.0) THEN
809	do i = 1, ncum
810	CALL iso_verif_egalite_choix(xtnk(iso_eau,i),qnk(i), &
811	'cv_driver 834',errmax,errmaxrel)
812	enddo
813	endif !if (iso_eau.gt.0) THEN
814	#endif
815	#endif
816
817	END IF
818
819	IF (iflag_con==4) THEN
820	CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, &
821	tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, &
822	tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, &
823	q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph)
824	END IF
825
826	! -------------------------------------------------------------------
827	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
828	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
829	! --- &
830	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
831	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
832	! --- &
833	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
834	! -------------------------------------------------------------------
835
836	IF (iflag_con==30) THEN
837	CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd
838	, tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, &
839	inb, tp, tvp, clw, hp, ep, sigp, buoy &
840	#ifdef ISO
841	,xtnk,xt,xtclw &
842	#endif
843	)
844
845	#ifdef ISO
846	#ifdef ISOVERIF
847	WRITE(,) 'cv_driver 863: apres CALL cv30_undilute2'
848	do k = 1, klev
849	do i = 1, ncum
850	IF (iso_eau.gt.0) THEN
851	CALL iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
852	'cv_driver 650',errmax,errmaxrel)
853	CALL iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
854	'cv_driver 652',errmax,errmaxrel)
855	endif ! if (iso_eau.gt.0) THEN
856	IF (iso_HDO.gt.0) THEN
857	CALL iso_verif_aberrant_choix( &
858	xt(iso_HDO,i,k),q(i,k), &
859	ridicule,deltalim,'cv_driver 794, apres undilute2')
860	endif !if (iso_HDO.gt.0) THEN
861	#ifdef ISOTRAC
862	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 780trac')
863	CALL iso_verif_traceur(xtclw(1,i,k),'cv_driver 781trac')
864	#endif
865	enddo
866	enddo
867	#endif
868	!WRITE(,) 'SORTIE CV3_UNDILUTE2'
869	#endif
870	END IF
871
872	IF (iflag_con==4) THEN
873	CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, &
874	gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
875	END IF
876
877	! -------------------------------------------------------------------
878	! --- CLOSURE
879	! -------------------------------------------------------------------
880
881	IF (iflag_con==30) THEN
882	CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd
883	, pbase, p, ph, tv, buoy, sig, w0, cape, m)
884
885	! epmax_cape
886	CALL cv30_epmax_fn_cape(nloc,ncum,nd &
887	,cape,ep,hp,icb,inb,clw,nk,t,h,lv &
888	,epmax_diag)
889	! on écrase ep et recalcule hp
890	END IF
891
892	IF (iflag_con==4) THEN
893	CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, &
894	cpn, iflag, cbmf)
895	END IF
896
897
898	! -------------------------------------------------------------------
899	! --- MIXING
900	! -------------------------------------------------------------------
901
902	IF (iflag_con==30) THEN
903	CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & !
904	! na->nd
905	, ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, &
906	ment, qent, uent, vent, sij, elij, ments, qents, traent &
907	#ifdef ISO
908	,xt,xtnk,xtclw &
909	,xtent,xtelij &
910	#endif
911	)
912
913
914	#ifdef ISO
915	#ifdef ISOVERIF
916	WRITE(,) 'cv_driver 837: apres cv3_mixing'
917	do k = 1, klev
918	do j = 1, klev
919	do i = 1, ncum
920	IF (iso_eau.gt.0) THEN
921	CALL iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), &
922	elij(i,j,k),'cv_driver 881',errmax,errmaxrel)
923	CALL iso_verif_egalite_choix(xtent(iso_eau,i,j,k), &
924	qent(i,j,k),'cv_driver 882',errmax,errmaxrel)
925	endif ! if (iso_eau.gt.0) THEN
926	#ifdef ISOTRAC
927	CALL iso_verif_traceur_justmass(xtent(1,i,j,k), &
928	'cv_driver 846')
929	CALL iso_verif_traceur_justmass(xtelij(1,i,j,k), &
930	'cv_driver 847')
931	! on ne verifie pas le deltaD ici car peut depasser le seuil
932	! raisonable pour temperatures tres froides.
933	#endif
934	enddo
935	enddo
936	enddo !do k = 1, klev
937	do k = 1, klev
938	do i = 1, ncum
939	IF (iso_eau.gt.0) THEN
940	CALL iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
941	'cv_driver 709',errmax,errmaxrel)
942	endif ! if (iso_eau.gt.0) THEN
943	#ifdef ISOTRAC
944	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 856')
945	IF (option_tmin.EQ.1) THEN
946	IF (iso_verif_positif_nostop(xtclw(itZonIso( &
947	izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) &
948	,'cv_driver 909').EQ.1) THEN
949	WRITE(,) 'i,k=',i,k
950	WRITE(,) 'xtclw=',xtclw(:,i,k)
951	stop
952	endif !if (iso_verif_positif_nostop(xtclw(itZonIso(
953	endif !if ((option_traceurs.EQ.17).OR.
954	#endif
955	enddo
956	enddo !do k = 1, klev
957
958	#endif
959	#endif
960
961	END IF
962
963	IF (iflag_con==4) THEN
964	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, &
965	h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, &
966	nent, sij, elij)
967	END IF
968
969	! -------------------------------------------------------------------
970	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
971	! -------------------------------------------------------------------
972
973	IF (iflag_con==30) THEN
974
975	#ifdef ISO
976	#ifdef ISOVERIF
977	do k = 1, klev
978	do i = 1, ncum
979	IF (iso_eau.gt.0) THEN
980	CALL iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
981	'cv_driver 753',errmax,errmaxrel)
982	endif ! if (iso_eau.gt.0) THEN
983	#ifdef ISOTRAC
984	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 885')
985	#endif
986	enddo
987	enddo !do k = 1, klev
988	#endif
989	#endif
990
991	! RomP >>>
992	CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd
993	, t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, &
994	ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, &
995	wdtraina, wdtrainm &
996	#ifdef ISO
997	,xt,xtclw,xtelij &
998	,xtp,xtwater,xtevap,xtwdtraina &
999	#endif
1000	)
1001	! RomP <<<
1002
1003	#ifdef ISO
1004	! WRITE(,) 'klev=',klev
1005	#ifdef ISOVERIF
1006	WRITE(,) 'cv_driver 930: apres cv3_unsat'
1007	do k = 1, klev
1008	do i = 1, ncum
1009	IF (iso_eau.gt.0) THEN
1010	! WRITE(,) 'i,k=',i,k
1011	CALL iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1012	'cv_driver 778',errmax,errmaxrel)
1013	CALL iso_verif_egalite_choix(xtp(iso_eau,i,k), &
1014	qp(i,k),'cv_driver 780',errmax,errmaxrel)
1015	CALL iso_verif_egalite_choix( &
1016	xtwater(iso_eau,i,k),water(i,k), &
1017	'cv_driver 782',errmax,errmaxrel)
1018	CALL iso_verif_egalite_choix(xtevap(iso_eau,i,k), &
1019	evap(i,k),'cv_driver 784',errmax,errmaxrel)
1020	endif ! if (iso_eau.gt.0) THEN
1021	#ifdef ISOTRAC
1022	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 939')
1023	CALL iso_verif_traceur(xtp(1,i,k),'cv_driver 940')
1024	CALL iso_verif_traceur(xtwater(1,i,k),'cv_driver 941')
1025	CALL iso_verif_traceur_justmass(xtevap(1,i,k), &
1026	'cv_driver 942')
1027	IF (bidouille_anti_divergence) THEN
1028	CALL iso_verif_traceur_pbidouille( &
1029	xtp(1,i,k),'cv_driver 956')
1030	CALL iso_verif_traceur_pbidouille( &
1031	xtwater(1,i,k),'cv_driver 958')
1032	endif
1033	#endif
1034	enddo !do i = 1, ncum
1035	enddo !do k = 1, klev
1036	#endif
1037	#endif
1038
1039	END IF
1040
1041	IF (iflag_con==4) THEN
1042	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, &
1043	ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap)
1044	END IF
1045
1046
1047	#ifdef ISO
1048	#ifdef ISOTRAC
1049	IF (option_traceurs.EQ.6) THEN
1050	! on colorie les ddfts en rouge, le reste est en blanc.
1051	do k = 1, klev
1052	do i = 1, ncum
1053	do iiso=1,niso
1054	ixt_ddft=itZonIso(izone_ddft,iiso)
1055	ixt_poubelle=itZonIso(izone_poubelle,iiso)
1056	xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) &
1057	+xtp(ixt_poubelle,i,k)
1058	xtp(ixt_poubelle,i,k)=0.0
1059	enddo !do iiso=1,niso
1060	#ifdef ISOVERIF
1061	CALL iso_verif_traceur(xtp(1,i,k),'cv_driver 990')
1062	#endif
1063	enddo !do i = 1, ncum
1064	enddo !do k = 1, klev
1065	ELSE IF (option_traceurs.EQ.19) THEN
1066	! on colorie les ddfts, mais on sauve la revap
1067	do k = 1, klev
1068	do i = 1, ncum
1069	do izone=1,nzone
1070	IF (izone.EQ.izone_ddft) THEN
1071	do iiso=1,niso
1072	ixt_ddft=itZonIso(izone,iiso)
1073	ixt_revap=itZonIso(izone_revap,iiso)
1074	xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k)
1075	enddo !do iiso=1,niso
1076	elseif (izone.EQ.izone_ddft) THEN
1077	! rien a faire
1078	else !if (izone.EQ.izone_ddft) THEN
1079	do iiso=1,niso
1080	ixt=itZonIso(izone,iiso)
1081	xtp(ixt,i,k)=0.0
1082	enddo !do iiso=1,niso
1083	endif !if (izone.EQ.izone_ddft) THEN
1084	enddo !do izone=1,nzone
1085	#ifdef ISOVERIF
1086	CALL iso_verif_traceur(xtp(1,i,k),'cv_driver 1059')
1087	#endif
1088	enddo !do i = 1, ncum
1089	enddo !do k = 1, klev
1090	endif !if (option_traceurs.EQ.6) THEN
1091	#endif
1092	#endif
1093
1094	! -------------------------------------------------------------------
1095	! --- YIELD
1096	! (tendencies, precipitation, variables of interface with other
1097	! processes, etc)
1098	! -------------------------------------------------------------------
1099
1100	IF (iflag_con==30) THEN
1101	CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd
1102	, icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, &
1103	clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, &
1104	uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, &
1105	ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, &
1106	wd &
1107	#ifdef ISO
1108	,xt,xtclw,xtp,xtwater,xtevap &
1109	,xtent,xtelij,xtprecip,fxt,xtVPrecip &
1110	#ifdef DIAGISO
1111	,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1112	,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
1113	,f_detrainement,q_detrainement,xt_detrainement &
1114	#endif
1115	#endif
1116	)
1117
1118	#ifdef ISOVERIF
1119	DO k = 1, nd
1120	DO i = 1, ncum
1121	IF (iso_eau.gt.0) THEN
1122	CALL iso_verif_egalite_choix(fxt(iso_eau,i,k), &
1123	fq(i,k),'cv_driver 1086',errmax,errmaxrel)
1124	endif !if (iso_HDO.gt.0) THEN
1125	IF (iso_HDO.gt.0) THEN
1126	IF (q(i,k).gt.ridicule) THEN
1127	CALL iso_verif_aberrant( &
1128	(xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
1129	/(q(i,k)+delt*fq(i,k)),'cv_driver 855')
1130	endif
1131	endif
1132	#ifdef ISOTRAC
1133	CALL iso_verif_traceur(xt(1,i,k),'cv_driver 1008')
1134	#endif
1135	enddo
1136	enddo
1137	#endif
1138
1139	END IF
1140
1141	IF (iflag_con==4) THEN
1142	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, &
1143	ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, &
1144	evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, &
1145	tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc)
1146	END IF
1147
1148	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1149	! --- passive tracers
1150	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1151
1152	IF (iflag_con==30) THEN
1153	! RomP >>>
1154	CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, &
1155	d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb)
1156	! RomP <<<
1157	END IF
1158
1159	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1160	! --- UNCOMPRESS THE FIELDS
1161	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1162	! set iflag1 =42 for non convective points
1163	DO i = 1, len
1164	iflag1(i) = 42
1165	END DO
1166
1167	IF (iflag_con==30) THEN
1168	CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, &
1169	vprecip, evap, ep, sig, w0 & !RomP
1170	, ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, &
1171	da, phi, mp, phi2, d1a, dam, sij & !RomP
1172	, elij, clw, epmlmmm, eplamm & !RomP
1173	, wdtraina, wdtrainm,epmax_diag & !RomP
1174	, iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP
1175	, ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, &
1176	qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP
1177	, elij1, clw1, epmlmmm1, eplamm1 & !RomP
1178	, wdtraina1, wdtrainm1,epmax_diag1 & !RomP
1179	#ifdef ISO
1180	,xtprecip,fxt,xtVPrecip,xtevap,xtclw,xtwdtraina &
1181	,xtprecip1,fxt1,xtVPrecip1,xtevap1,xtclw1,xtwdtraina1 &
1182	#ifdef DIAGISO
1183	, water,xtwater,qp,xtp &
1184	, fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1185	, fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip &
1186	, f_detrainement,q_detrainement,xt_detrainement &
1187	, water1,xtwater1,qp1,xtp1 &
1188	, fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
1189	, fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 &
1190	, f_detrainement1,q_detrainement1,xt_detrainement1 &
1191	#endif
1192	#endif
1193	) !RomP
1194
1195	#ifdef ISO
1196	#ifdef ISOVERIF
1197	DO k = 1, nd
1198	DO i = 1, len
1199	IF (iso_eau.gt.0) THEN
1200	CALL iso_verif_egalite_choix(fxt1(iso_eau,i,k), &
1201	fq1(i,k),'cv_driver 1170',errmax,errmaxrel)
1202	endif !if (iso_HDO.gt.0) THEN
1203	IF (iso_HDO.gt.0) THEN
1204	IF (q1(i,k).gt.ridicule) THEN
1205	CALL iso_verif_aberrant( &
1206	(xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) &
1207	/(q1(i,k)+delt*fq1(i,k)),'cv_driver 2554')
1208	endif
1209	endif
1210	enddo !DO i = 1, len
1211	enddo !DO k = 1, nd
1212	#ifdef ISOTRAC
1213	CALL iso_verif_trac_masse_vect(fxt1,len,nd, &
1214	'cv_driver 1200',errmax,errmaxrel)
1215	#endif
1216	#endif
1217	#endif
1218
1219	END IF
1220
1221	IF (iflag_con==4) THEN
1222	CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, &
1223	fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, &
1224	ma1, qcondc1)
1225	END IF
1226
1227	END IF ! ncum>0
1228
1229	! print *, 'fin cv_driver ->' !jyg
1230
1231	END SUBROUTINE cv_driver
1232
1233	! ==================================================================
1234	SUBROUTINE cv_flag(iflag_ice_thermo)
1235
1236	USE lmdz_ioipsl_getin_p, ONLY: getin_p
1237	USE lmdz_cvflag
1238
1239	IMPLICIT NONE
1240
1241	! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if
1242	! iflag_ice_thermo >=1
1243	INTEGER iflag_ice_thermo
1244
1245	! -- si .TRUE., on rend la gravite plus explicite et eventuellement
1246	! differente de 10.0 dans convect3:
1247	cvflag_grav = .TRUE.
1248	cvflag_ice = iflag_ice_thermo >= 1
1249
1250	! si icvflag_Tpa=0, alors la fraction de glace dans l'ascendance adiabatique est
1251	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
1252	! calculee en deux iterations, une en supposant qu'il n'y a pas de glace et l'autre
1253	! en ajoutant la glace (ancien schema d'Arnaud Jam).
1254	! si icvflag_Tpa=1, alors la fraction de glace dans l'ascendance adiabatique est
1255	! fonction de la temperature de l'environnement et la temperature de l'ascendance est
1256	! calculee en une seule iteration.
1257	! si icvflag_Tpa=2, alors la fraction de glace dans l'ascendance adiabatique est
1258	! fonction de la temperature de l'ascendance et la temperature de l'ascendance est
1259	! calculee en une seule iteration.
1260	icvflag_Tpa=0
1261	CALL getin_p('icvflag_Tpa', icvflag_Tpa)
1262
1263
1264	END SUBROUTINE cv_flag
1265
1266	! ==================================================================
1267	SUBROUTINE cv_thermo(iflag_con)
1268	USE lmdz_cvthermo
1269	USE lmdz_yomcst
1270
1271	IMPLICIT NONE
1272
1273	! -------------------------------------------------------------
1274	! Set thermodynamical constants for convectL
1275	! -------------------------------------------------------------
1276
1277	INTEGER iflag_con
1278
1279
1280	! original set from convect:
1281	IF (iflag_con==4) THEN
1282	cpd = 1005.7
1283	cpv = 1870.0
1284	cl = 4190.0
1285	rrv = 461.5
1286	rrd = 287.04
1287	lv0 = 2.501E6
1288	g = 9.8
1289	t0 = 273.15
1290	grav = g
1291	ELSE
1292
1293	! constants consistent with LMDZ:
1294	cpd = rcpd
1295	cpv = rcpv
1296	cl = rcw
1297	ci = rcs
1298	rrv = rv
1299	rrd = rd
1300	lv0 = rlvtt
1301	lf0 = rlstt - rlvtt
1302	g = rg ! not used in convect3
1303	! ori t0 = RTT
1304	t0 = 273.15 ! convect3 (RTT=273.16)
1305	! maf grav= 10. ! implicitely or explicitely used in convect3
1306	grav = g ! implicitely or explicitely used in convect3
1307	END IF
1308
1309	rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?)
1310
1311	clmcpv = cl - cpv
1312	clmcpd = cl - cpd
1313	clmci = cl - ci
1314	cpdmcp = cpd - cpv
1315	cpvmcpd = cpv - cpd
1316	cpvmcl = cl - cpv ! for convect3
1317	eps = rrd/rrv
1318	epsi = 1.0/eps
1319	epsim1 = epsi - 1.0
1320	! ginv=1.0/g
1321	ginv = 1.0/grav
1322	hrd = 0.5*rrd
1323
1324
1325	END SUBROUTINE cv_thermo

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format