source: LMDZ6/branches/Amaury_dev/libf/phylmdiso/cv3_enthalpmix.F90 @ 5186

Last change on this file since 5186 was 5160, checked in by abarral, 3 months ago

Put .h into modules

  • Property svn:keywords set to Id
File size: 6.8 KB
Line 
1SUBROUTINE cv3_enthalpmix(len, nd, iflag, plim1, plim2, p, ph, &
2                       t, q, u, v, w, &
3                       wi, nk, tmix, thmix, qmix, qsmix, umix, vmix, plcl &
4#ifdef ISO
5                       ,xt,xtmix &
6#endif
7                       )
8#ifdef ISO
9    USE infotrac_phy, ONLY: ntiso
10#endif
11  ! **************************************************************
12  ! *
13  ! CV3_ENTHALPMIX   Brassage adiabatique d'une couche d'epaisseur *
14  ! arbitraire.                                   *
15  ! *
16  ! written by   : Grandpeix Jean-Yves, 28/12/2001, 13.14.24    *
17  ! modified by :  Filiberti M-A 06/2005 vectorisation          *
18  ! **************************************************************
19USE lmdz_cvthermo
20USE lmdz_yoethf
21
22USE lmdz_yomcst
23
24  IMPLICIT NONE
25 INCLUDE "FCTTRE.h"
26  ! ==============================================================
27
28  ! vertmix : determines theta, t, q, qs, u and v of the mixture generated by
29  ! adiabatic mixing of air between plim1 and plim2 with weighting w.
30  ! If plim1 and plim2 fall within the same model layer, then theta, ... v
31  ! are those of that layer.
32  ! A minimum value (dpmin) is imposed upon plim1-plim2
33
34  ! ===============================================================
35
36!inputs:
37  INTEGER, INTENT (IN)                      :: nd, len
38  INTEGER, DIMENSION (len), INTENT (IN)     :: nk
39  REAL, DIMENSION (len), INTENT (IN)        :: plim1, plim2
40  REAL, DIMENSION (len,nd), INTENT (IN)     :: t, q
41  REAL, DIMENSION (len,nd), INTENT (IN)     :: u, v
42  REAL, DIMENSION (nd), INTENT (IN)         :: w
43  REAL, DIMENSION (len,nd), INTENT (IN)     :: p
44  REAL, DIMENSION (len,nd+1), INTENT (IN)   :: ph
45#ifdef ISO
46  REAL, DIMENSION (ntiso,len,nd), INTENT (IN)     :: xt
47#endif
48!input/output:
49  INTEGER, DIMENSION (len), INTENT (INOUT)  ::  iflag
50!outputs:
51  REAL, DIMENSION (len), INTENT (OUT)       :: tmix, thmix, qmix
52  REAL, DIMENSION (len), INTENT (OUT)       :: umix, vmix
53  REAL, DIMENSION (len), INTENT (OUT)       :: qsmix
54  REAL, DIMENSION (len), INTENT (OUT)       :: plcl
55  REAL, DIMENSION (len,nd), INTENT (OUT)    :: wi
56#ifdef ISO
57  REAL, DIMENSION (ntiso,len), INTENT (OUT)     :: xtmix
58#endif
59!internal variables :
60  INTEGER i, j
61  INTEGER niflag7
62  INTEGER, DIMENSION(len)                   :: j1, j2
63  REAL                                      :: a, b
64  REAL                                      :: cpn
65  REAL                                      :: x, y, p0, p0m1, zdelta, zcor
66  REAL, SAVE                                :: dpmin=1.
67!$OMP THREADPRIVATE(dpmin)
68  REAL, DIMENSION(len)                      :: plim2p  ! = min(plim2(:),plim1(:)-dpmin)
69  REAL, DIMENSION(len)                      :: akm     ! mixture enthalpy
70  REAL, DIMENSION(len)                      :: dpw, coef
71  REAL, DIMENSION(len)                      :: rdcp, a2, b2, pnk
72  REAL, DIMENSION(len)                      :: rh, chi
73  REAL, DIMENSION(len)                      :: eqwght
74  REAL, DIMENSION(len,nd)                   :: p1, p2
75#ifdef ISO
76  INTEGER ixt
77#endif
78
79
80!!  PRINT *,' ->cv3_vertmix, plim1,plim2 ', plim1,plim2   !jyg
81  plim2p(:) = min(plim2(:),plim1(:)-dpmin)
82  j1(:)=nd
83  j2(:) = 0
84  DO j = 1, nd
85    DO i = 1, len
86      IF (plim1(i)<=ph(i,j)) j1(i) = j
87!!!      IF (plim2p(i)>=ph(i,j+1) .AND. plim2p(i)<ph(i,j)) j2(i) = j
88      IF (plim2p(i)< ph(i,j)) j2(i) = j
89    END DO
90  END DO
91
92  DO j = 1, nd
93    DO i = 1, len
94      wi(i, j) = 0.
95    END DO
96  END DO
97  DO i = 1, len
98    akm(i) = 0.
99    qmix(i) = 0.
100    umix(i) = 0.
101    vmix(i) = 0.
102    dpw(i) = 0.
103    a2(i) = 0.0
104    b2(i) = 0.
105    pnk(i) = p(i, nk(i))
106#ifdef ISO
107    xtmix(:,i) = 0.
108#endif
109  END DO
110  eqwght(:) = 0.
111
112  p0 = 1000.
113  p0m1 = 1./p0
114
115  DO i = 1, len
116    IF (j2(i) < j1(i)) THEN
117      coef(i) = 1.
118      eqwght(i) = 1.
119    ELSE
120      coef(i) = 1./(plim1(i)-plim2p(i))
121    ENDIF
122  END DO
123
124!!  PRINT *,'cv3_vertmix, j1,j2,coef ', j1,j2,coef  !jyg
125
126  DO j = 1, nd
127    DO i = 1, len
128      IF (j>=j1(i) .AND. j<=j2(i)) THEN
129        p1(i, j) = min(ph(i,j), plim1(i))
130        p2(i, j) = max(ph(i,j+1), plim2p(i))
131        ! CRtest:couplage thermiques: deja normalise
132        ! wi(i,j) = w(j)
133        ! PRINT*,'wi',wi(i,j)
134        wi(i, j) = w(j)*(p1(i,j)-p2(i,j))*coef(i)+eqwght(i)
135        dpw(i) = dpw(i) + wi(i, j)
136
137!!  PRINT *,'cv3_vertmix, j, wi(1,j),dpw ', j, wi(1,j),dpw  !jyg
138
139      END IF
140    END DO
141  END DO
142
143  ! CR:print
144  ! do i=1,len
145  ! PRINT*,'plim',plim1(i),plim2p(i)
146  ! enddo
147  DO j = 1, nd
148    DO i = 1, len
149      IF (j>=j1(i) .AND. j<=j2(i)) THEN
150        wi(i, j) = wi(i, j)/dpw(i)
151        akm(i) = akm(i) + (cpd*(1.-q(i,j))+q(i,j)*cpv)*t(i, j)*wi(i, j)
152        qmix(i) = qmix(i) + q(i, j)*wi(i, j)
153        umix(i) = umix(i) + u(i, j)*wi(i, j)
154        vmix(i) = vmix(i) + v(i, j)*wi(i, j)
155#ifdef ISO
156        DO ixt=1,ntiso
157          xtmix(ixt,i) = xtmix(ixt,i) +  xt(ixt,i, j)*wi(i, j)
158        enddo
159#endif
160      END IF
161    END DO
162  END DO
163
164  DO i = 1, len
165    rdcp(i) = (rrd*(1.-qmix(i))+qmix(i)*rrv)/(cpd*(1.-qmix(i))+qmix(i)*cpv)
166  END DO
167
168
169!!  PRINT *,'cv3_vertmix, rdcp ', rdcp  !jyg
170
171
172
173  DO j = 1, nd
174    DO i = 1, len
175      IF (j>=j1(i) .AND. j<=j2(i)) THEN
176        ! c            x=(.5*(p1(i,j)+p2(i,j))*p0m1)**rdcp(i)
177        y = (.5*(p1(i,j)+p2(i,j))/pnk(i))**rdcp(i)
178        ! c            a2(i)=a2(i)+(cpd*(1.-qmix(i))+qmix(i)*cpv)*x*wi(i,j)
179        b2(i) = b2(i) + (cpd*(1.-qmix(i))+qmix(i)*cpv)*y*wi(i, j)
180      END IF
181    END DO
182  END DO
183
184  DO i = 1, len
185    tmix(i) = akm(i)/b2(i)
186    thmix(i) = tmix(i)*(p0/pnk(i))**rdcp(i)
187    ! PRINT*,'thmix akm',akm(i),b2(i)
188    ! PRINT*,'thmix t',tmix(i),p0
189    ! PRINT*,'thmix p',pnk(i),rdcp(i)
190    ! PRINT*,'thmix',thmix(i)
191    ! c         thmix(i) = akm(i)/a2(i)
192    ! c         tmix(i)= thmix(i)*(pnk(i)*p0m1)**rdcp(i)
193    zdelta = max(0., sign(1.,rtt-tmix(i)))
194    qsmix(i) = r2es*foeew(tmix(i), zdelta)/(pnk(i)*100.)
195    qsmix(i) = min(0.5, qsmix(i))
196    zcor = 1./(1.-retv*qsmix(i))
197    qsmix(i) = qsmix(i)*zcor
198  END DO
199
200  ! -------------------------------------------------------------------
201  ! --- Calculate lifted condensation level of air at parcel origin level
202  ! --- (Within 0.2% of formula of Bolton, MON. WEA. REV.,1980)
203  ! -------------------------------------------------------------------
204
205  a = 1669.0 ! convect3
206  b = 122.0 ! convect3
207
208
209  niflag7 = 0
210  DO i = 1, len
211
212    IF (iflag(i)/=7) THEN ! modif sb Jun7th 2002
213
214      rh(i) = qmix(i)/qsmix(i)
215      chi(i) = tmix(i)/(a-b*rh(i)-tmix(i)) ! convect3
216      ! ATTENTION, la LIGNE DESSOUS A ETE RAJOUTEE ARBITRAIREMENT ET
217      ! MASQUE UN PB POTENTIEL
218      chi(i) = max(chi(i), 0.)
219      rh(i) = max(rh(i), 0.)
220      plcl(i) = pnk(i)*(rh(i)**chi(i))
221      IF (((plcl(i)<200.0) .OR. (plcl(i)>=2000.0)) .AND. (iflag(i)==0)) &
222          iflag(i) = 8
223
224    ELSE
225
226      niflag7 = niflag7 + 1
227      plcl(i) = plim2p(i)
228
229    END IF ! iflag=7
230
231    ! PRINT*,'NIFLAG7  =',niflag7
232
233  END DO
234
235!!  PRINT *,' cv3_vertmix->'  !jyg
236
237
238
239END SUBROUTINE cv3_enthalpmix
240
Note: See TracBrowser for help on using the repository browser.