1 | ! $Id: stratosphere_mask.F90 5158 2024-08-02 12:12:03Z abarral $ |
---|
2 | |
---|
3 | SUBROUTINE stratosphere_mask(missing_val, pphis, t_seri, pplay, xlat) |
---|
4 | |
---|
5 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
---|
6 | |
---|
7 | ! determination of tropopause height and temperature from gridded temperature data |
---|
8 | |
---|
9 | ! reference: Reichler, T., M. Dameris, and R. Sausen (GRL, 10.1029/2003GL018240, 2003) |
---|
10 | ! modified: 6/28/06 tjr |
---|
11 | ! adapted to LMDZ by C. Kleinschmitt (2016-02-15) |
---|
12 | ! committed to LMDz by O. Boucher (2016) with a mistake |
---|
13 | ! mistake corrected by O. Boucher (2017-12-11) |
---|
14 | |
---|
15 | ! input: temp(nlon,nlat,nlev) 3D-temperature field |
---|
16 | ! ps(nlon,nlat) 2D-surface pressure field |
---|
17 | ! zs(nlon,nlat) 2D-surface height |
---|
18 | ! nlon grid points in x |
---|
19 | ! nlat grid points in y |
---|
20 | ! pfull(nlon,nlat,nlev) full pressure levels in Pa |
---|
21 | ! plimu upper limit for tropopause pressure |
---|
22 | ! pliml lower limit for tropopause pressure |
---|
23 | ! gamma tropopause criterion, e.g. -0.002 K/m |
---|
24 | |
---|
25 | ! output: p_tropopause(klon) tropopause pressure in Pa with missing values |
---|
26 | ! t_tropopause(klon) tropopause temperature in K with missing values |
---|
27 | ! z_tropopause(klon) tropopause height in m with missing values |
---|
28 | ! stratomask stratospheric mask withtout missing values |
---|
29 | ! ifil # of undetermined values |
---|
30 | |
---|
31 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
---|
32 | |
---|
33 | USE dimphy |
---|
34 | USE phys_local_var_mod, ONLY: stratomask |
---|
35 | USE phys_local_var_mod, ONLY: p_tropopause, z_tropopause, t_tropopause |
---|
36 | USE lmdz_print_control, ONLY: lunout, prt_level |
---|
37 | USE lmdz_yomcst |
---|
38 | |
---|
39 | IMPLICIT NONE |
---|
40 | |
---|
41 | REAL, INTENT(IN) :: missing_val ! missing value, also XIOS |
---|
42 | REAL, DIMENSION(klon), INTENT(IN) :: pphis ! Geopotentiel de surface |
---|
43 | REAL, DIMENSION(klon, klev), INTENT(IN) :: t_seri ! Temperature |
---|
44 | REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay ! pression pour le mileu de chaque couche (en Pa) |
---|
45 | REAL, DIMENSION(klon), INTENT(IN) :: xlat ! latitudes pour chaque point |
---|
46 | |
---|
47 | REAL, PARAMETER :: plimu = 45000. |
---|
48 | REAL, PARAMETER :: pliml = 7500. |
---|
49 | REAL, PARAMETER :: gamma = -0.002 |
---|
50 | LOGICAL, PARAMETER :: dofill = .TRUE. |
---|
51 | REAL, DIMENSION(klon) :: tp |
---|
52 | REAL, DIMENSION(klev) :: t, p |
---|
53 | INTEGER :: i, k, ifil |
---|
54 | REAL :: ptrp, ttrp, ztrp, psrf, zsrf, pi |
---|
55 | |
---|
56 | pi = 4. * ATAN(1.) |
---|
57 | |
---|
58 | !--computing tropopause |
---|
59 | DO i = 1, klon |
---|
60 | DO k = 1, klev |
---|
61 | t(k) = t_seri(i, klev + 1 - k) |
---|
62 | p(k) = pplay(i, klev + 1 - k) |
---|
63 | ENDDO |
---|
64 | psrf = pplay(i, 1) |
---|
65 | zsrf = pphis(i) / RG !--altitude de la surface |
---|
66 | CALL twmo(missing_val, klev, t, p, psrf, zsrf, plimu, pliml, gamma, ptrp, ttrp, ztrp) |
---|
67 | tp(i) = ptrp |
---|
68 | p_tropopause(i) = ptrp |
---|
69 | z_tropopause(i) = ztrp |
---|
70 | t_tropopause(i) = ttrp |
---|
71 | ENDDO |
---|
72 | |
---|
73 | !--filling holes in tp but not in p_tropopause |
---|
74 | IF (dofill) THEN |
---|
75 | ifil = 0 |
---|
76 | DO i = 1, klon |
---|
77 | IF (ABS(tp(i) / missing_val - 1.0)<0.01) THEN |
---|
78 | !set missing values to very simple profile (neighbour averaging too expensive in LMDZ) |
---|
79 | tp(i) = 50000. - 20000. * cos(xlat(i) / 360. * 2. * pi) |
---|
80 | ifil = ifil + 1 |
---|
81 | ENDIF |
---|
82 | ENDDO |
---|
83 | |
---|
84 | ENDIF |
---|
85 | |
---|
86 | DO i = 1, klon |
---|
87 | DO k = 1, klev |
---|
88 | IF (pplay(i, k)<tp(i)) THEN |
---|
89 | stratomask(i, k) = 1.0 |
---|
90 | ELSE |
---|
91 | stratomask(i, k) = 0.0 |
---|
92 | ENDIF |
---|
93 | ENDDO |
---|
94 | ENDDO |
---|
95 | |
---|
96 | IF (ifil>0 .AND. prt_level >5) THEN |
---|
97 | WRITE(lunout, *)'Tropopause: number of undetermined values =', ifil |
---|
98 | ENDIF |
---|
99 | |
---|
100 | END SUBROUTINE stratosphere_mask |
---|
101 | |
---|
102 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
---|
103 | ! twmo |
---|
104 | !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
---|
105 | |
---|
106 | SUBROUTINE twmo(missing_val, level, t, p, ps, zs, plimu, pliml, gamma, ptrp, ttrp, ztrp) |
---|
107 | |
---|
108 | ! reference: Reichler, T., M. Dameris, and R. Sausen (GRL, 10.1029/2003GL018240, 2003) |
---|
109 | |
---|
110 | USE lmdz_yomcst |
---|
111 | |
---|
112 | IMPLICIT NONE |
---|
113 | |
---|
114 | INTEGER, INTENT(IN) :: level |
---|
115 | REAL, INTENT(IN) :: missing_val |
---|
116 | REAL, INTENT(IN), DIMENSION(level) :: t, p |
---|
117 | REAL, INTENT(IN) :: plimu, pliml, gamma, ps, zs |
---|
118 | REAL, INTENT(OUT) :: ptrp, ttrp, ztrp |
---|
119 | |
---|
120 | REAL, parameter :: deltaz = 2000.0 |
---|
121 | |
---|
122 | REAL :: faktor |
---|
123 | REAL :: pmk, pm, a, b, tm, dtdp, dtdz, dlnp, tdlnp |
---|
124 | REAL :: ag, bg, ptph, ttph, a0, b0 |
---|
125 | REAL :: pm0, tm0, pmk0, dtdz0 |
---|
126 | REAL :: p2km, asum, aquer |
---|
127 | REAL :: pmk2, pm2, a2, b2, tm2, dtdp2, dtdz2 |
---|
128 | INTEGER :: icount, jj, j |
---|
129 | |
---|
130 | ptrp = missing_val |
---|
131 | ttrp = missing_val |
---|
132 | ztrp = missing_val |
---|
133 | |
---|
134 | faktor = -RG / RD |
---|
135 | |
---|
136 | DO j = level, 2, -1 |
---|
137 | |
---|
138 | ! dt/dz |
---|
139 | pmk = 0.5 * (p(j - 1)**rkappa + p(j)**rkappa) ! p**k at half level |
---|
140 | pm = pmk**(1. / rkappa) ! p at half level |
---|
141 | a = (t(j - 1) - t(j)) / (p(j - 1)**rkappa - p(j)**rkappa) ! dT/dp^k |
---|
142 | b = t(j) - (a * p(j)**rkappa) |
---|
143 | tm = a * pmk + b ! T at half level |
---|
144 | dtdp = a * rkappa * pm**(rkappa - 1.) ! dT/dp at half level |
---|
145 | dtdz = faktor * dtdp * pm / tm ! dT/dz at half level |
---|
146 | |
---|
147 | ! dt/dz valid? |
---|
148 | IF (j==level) go to 999 ! no, start level, initialize first |
---|
149 | IF (dtdz<=gamma) go to 999 ! no, dt/dz < -2 K/km |
---|
150 | IF (dtdz0>gamma) go to 999 ! no, dt/dz below > -2 K/km |
---|
151 | IF (pm>plimu) go to 999 ! no, pm too low |
---|
152 | |
---|
153 | ! dtdz is valid, calculate tropopause pressure ptph |
---|
154 | ag = (dtdz - dtdz0) / (pmk - pmk0) |
---|
155 | bg = dtdz0 - (ag * pmk0) |
---|
156 | ptph = exp(log((gamma - bg) / ag) / rkappa) |
---|
157 | |
---|
158 | ! calculate temperature at this ptph assuming linear gamma |
---|
159 | ! interpolation |
---|
160 | ttph = tm0 |
---|
161 | ttph = ttph - (bg * log(pm0) + ag * (pm0**rkappa) / rkappa) / faktor * t(j) |
---|
162 | ttph = ttph + (bg * log(ptph) + ag * (ptph**rkappa) / rkappa) / faktor * t(j) |
---|
163 | |
---|
164 | IF (ptph<pliml) go to 999 |
---|
165 | IF (ptph>plimu) go to 999 |
---|
166 | |
---|
167 | ! 2nd test: dtdz above 2 km must not exceed gamma |
---|
168 | p2km = ptph + deltaz * (pm / tm) * faktor ! p at ptph + 2km |
---|
169 | asum = 0.0 ! dtdz above |
---|
170 | icount = 0 ! number of levels above |
---|
171 | |
---|
172 | ! test until apm < p2km |
---|
173 | DO jj = j, 2, -1 |
---|
174 | |
---|
175 | pmk2 = .5 * (p(jj - 1)**rkappa + p(jj)**rkappa) ! p mean ^kappa |
---|
176 | pm2 = pmk2**(1 / rkappa) ! p mean |
---|
177 | IF(pm2>ptph) go to 110 ! doesn't happen |
---|
178 | IF(pm2<p2km) go to 888 ! ptropo is valid |
---|
179 | |
---|
180 | a2 = (t(jj - 1) - t(jj)) ! a |
---|
181 | a2 = a2 / (p(jj - 1)**rkappa - p(jj)**rkappa) |
---|
182 | b2 = t(jj) - (a2 * p(jj)**rkappa) ! b |
---|
183 | tm2 = a2 * pmk2 + b2 ! T mean |
---|
184 | dtdp2 = a2 * rkappa * (pm2**(rkappa - 1)) ! dt/dp |
---|
185 | dtdz2 = faktor * dtdp2 * pm2 / tm2 |
---|
186 | asum = asum + dtdz2 |
---|
187 | icount = icount + 1 |
---|
188 | aquer = asum / float(icount) ! dt/dz mean |
---|
189 | |
---|
190 | ! discard ptropo ? |
---|
191 | IF (aquer<=gamma) go to 999 ! dt/dz above < gamma |
---|
192 | |
---|
193 | 110 continue |
---|
194 | enddo ! test next level |
---|
195 | |
---|
196 | 888 continue ! ptph is valid |
---|
197 | ptrp = ptph |
---|
198 | ttrp = ttph |
---|
199 | |
---|
200 | ! now calculate height of tropopause by integrating hypsometric equation |
---|
201 | ! from ps to ptrp |
---|
202 | ! linearly interpolate in p (results are identical to p^kappa) |
---|
203 | |
---|
204 | jj = LEVEL ! bottom |
---|
205 | DO while ((P(jj)>PS) .OR. (T(jj)<100)) ! T must be valid too |
---|
206 | jj = jj - 1 |
---|
207 | END DO |
---|
208 | |
---|
209 | DLNP = log(PS / P(jj)) ! from surface pressure |
---|
210 | TM = T(jj) ! take TM of lowest level (better: extrapolate) |
---|
211 | TDLNP = TM * DLNP |
---|
212 | |
---|
213 | DO while ((JJ>=2) .AND. (PTRP<P(jj - 1))) |
---|
214 | DLNP = log(P(jj) / P(jj - 1)) |
---|
215 | TM = 0.5 * (T(jj) + T(jj - 1)) |
---|
216 | TDLNP = TDLNP + TM * DLNP |
---|
217 | JJ = JJ - 1 |
---|
218 | END DO |
---|
219 | |
---|
220 | DLNP = log(P(jj) / PTRP) ! up to tropopause pressure |
---|
221 | TM = 0.5 * (T(jj) + TTRP) ! use TTRP to get TM of this level |
---|
222 | TDLNP = TDLNP + TM * DLNP |
---|
223 | |
---|
224 | ZTRP = ZS + TDLNP * RD / RG |
---|
225 | |
---|
226 | !!if (ZTRP .lt. 0) THEN |
---|
227 | !! PRINT*,'ZTRP=',ZTRP |
---|
228 | !! PRINT*,'PS=',PS |
---|
229 | !! PRINT*,'P=',P |
---|
230 | !! PRINT*,'T=',T |
---|
231 | !! PRINT*,'ZS=',ZS |
---|
232 | !! stop |
---|
233 | !!endif |
---|
234 | |
---|
235 | return |
---|
236 | |
---|
237 | 999 continue ! continue search at next higher level |
---|
238 | tm0 = tm |
---|
239 | pm0 = pm |
---|
240 | pmk0 = pmk |
---|
241 | dtdz0 = dtdz |
---|
242 | a0 = a |
---|
243 | b0 = b |
---|
244 | |
---|
245 | END DO |
---|
246 | |
---|
247 | ! no tropopouse found |
---|
248 | |
---|
249 | END SUBROUTINE twmo |
---|