Context Navigation

lmdz_scm.F90 @ 5224

Last change on this file since 5224 was 5224, checked in by abarral, 30 hours ago
Merge r5204 r5205 Light lint Correct missing IOIPSL includes
File size: 43.1 KB

Line
1	MODULE lmdz_scm
2	PRIVATE ! -- We'd love to put IMPLICIT NONE; here...
3	PUBLIC scm
4	CONTAINS
5	SUBROUTINE scm
6	USE ioipsl, ONLY: ju2ymds, ymds2ju, ioconf_calendar, getin
7	USE phys_state_var_mod, ONLY: phys_state_var_init, phys_state_var_end, &
8	clwcon, detr_therm, &
9	qsol, fevap, z0m, z0h, agesno, &
10	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
11	falb_dir, falb_dif, &
12	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
13	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
14	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, &
15	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
16	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
17	awake_dens, cv_gen, wake_cstar, &
18	zgam, zmax0, zmea, zpic, zsig, &
19	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
20	prlw_ancien, prsw_ancien, prw_ancien, &
21	u10m, v10m, ale_wake, ale_bl_stat, ratqs_inter_
22
23	USE dimphy
24	USE surface_data, ONLY: type_ocean, ok_veget
25	USE pbl_surface_mod, ONLY: ftsoil, pbl_surface_init, &
26	pbl_surface_final
27	USE fonte_neige_mod, ONLY: fonte_neige_init, fonte_neige_final
28
29	USE lmdz_infotrac
30	USE control_mod
31	USE indice_sol_mod
32	USE phyaqua_mod
33	USE mod_1D_cases_read_std
34	USE lmdz_print_control, ONLY: lunout, prt_level
35	USE iniphysiq_mod, ONLY: iniphysiq
36	USE mod_const_mpi, ONLY: comm_lmdz
37	USE physiq_mod, ONLY: physiq
38	USE comvert_mod, ONLY: presnivs, ap, bp, dpres, nivsig, nivsigs, pa, &
39	preff, aps, bps, pseudoalt, scaleheight
40	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
41	itau_dyn, itau_phy, start_time, year_len
42	USE phys_cal_mod, ONLY: year_len_phys_cal_mod => year_len
43	USE lmdz_dimensions, ONLY: iim, jjm, llm, ndm
44	USE lmdz_1dutils, ONLY: fq_sat, conf_unicol, dyn1deta0, dyn1dredem, disvert0
45
46	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
47	USE lmdz_clesphys
48	USE lmdz_flux_arp, ONLY: fsens, flat, betaevap, ust, tg, ok_flux_surf, ok_prescr_ust, ok_prescr_beta, ok_forc_tsurf
49	USE lmdz_compbl, ONLY: iflag_pbl, iflag_pbl_split, iflag_order2_sollw, ifl_pbltree
50	USE lmdz_fcs_gcssold, ONLY: imp_fcg_gcssold, ts_fcg_gcssold, Tp_fcg_gcssold, Tp_ini_gcssold, xTurb_fcg_gcssold
51	USE lmdz_tsoilnudge, ONLY: nudge_tsoil, isoil_nudge, Tsoil_nudge, tau_soil_nudge
52	USE lmdz_yomcst
53	USE lmdz_compar1d
54	USE lmdz_date_cas, ONLY: year_ini_cas, mth_ini_cas, day_deb, heure_ini_cas, pdt_cas, day_ju_ini_cas
55	USE lmdz_conf_gcm, ONLY: conf_gcm
56
57
58	INCLUDE "dimsoil.h"
59
60	!=====================================================================
61	! DECLARATIONS
62	!=====================================================================
63
64	!---------------------------------------------------------------------
65	! Arguments d' initialisations de la physique (USER DEFINE)
66	!---------------------------------------------------------------------
67
68	INTEGER, parameter :: ngrid = 1
69	REAL :: zcufi = 1.
70	REAL :: zcvfi = 1.
71	REAL :: fnday
72	REAL :: day, daytime
73	REAL :: day1
74	REAL :: heure
75	INTEGER :: jour
76	INTEGER :: mois
77	INTEGER :: an
78
79	!---------------------------------------------------------------------
80	! Declarations related to forcing and initial profiles
81	!---------------------------------------------------------------------
82
83	INTEGER :: kmax = llm
84	INTEGER llm700, nq1, nq2
85	INTEGER, PARAMETER :: nlev_max = 1000, nqmx = 1000
86	REAL timestep, frac
87	REAL height(nlev_max), tttprof(nlev_max), qtprof(nlev_max)
88	real uprof(nlev_max), vprof(nlev_max), e12prof(nlev_max)
89	real ugprof(nlev_max), vgprof(nlev_max), wfls(nlev_max)
90	real dqtdxls(nlev_max), dqtdyls(nlev_max)
91	real dqtdtls(nlev_max), thlpcar(nlev_max)
92	real qprof(nlev_max, nqmx)
93
94	! INTEGER :: forcing_type
95	LOGICAL :: forcing_les = .FALSE.
96	LOGICAL :: forcing_armcu = .FALSE.
97	LOGICAL :: forcing_rico = .FALSE.
98	LOGICAL :: forcing_radconv = .FALSE.
99	LOGICAL :: forcing_toga = .FALSE.
100	LOGICAL :: forcing_twpice = .FALSE.
101	LOGICAL :: forcing_amma = .FALSE.
102	LOGICAL :: forcing_dice = .FALSE.
103	LOGICAL :: forcing_gabls4 = .FALSE.
104
105	LOGICAL :: forcing_GCM2SCM = .FALSE.
106	LOGICAL :: forcing_GCSSold = .FALSE.
107	LOGICAL :: forcing_sandu = .FALSE.
108	LOGICAL :: forcing_astex = .FALSE.
109	LOGICAL :: forcing_fire = .FALSE.
110	LOGICAL :: forcing_case = .FALSE.
111	LOGICAL :: forcing_case2 = .FALSE.
112	LOGICAL :: forcing_SCM = .FALSE.
113
114	!flag forcings
115	LOGICAL :: nudge_wind = .TRUE.
116	LOGICAL :: nudge_thermo = .FALSE.
117	LOGICAL :: cptadvw = .TRUE.
118
119
120	!=====================================================================
121	! DECLARATIONS FOR EACH CASE
122	!=====================================================================
123
124	INCLUDE "1D_decl_cases.h"
125
126	!---------------------------------------------------------------------
127	! Declarations related to nudging
128	!---------------------------------------------------------------------
129	INTEGER :: nudge_max
130	parameter (nudge_max = 9)
131	INTEGER :: inudge_RHT = 1
132	INTEGER :: inudge_UV = 2
133	LOGICAL :: nudge(nudge_max)
134	REAL :: t_targ(llm)
135	REAL :: rh_targ(llm)
136	REAL :: u_targ(llm)
137	REAL :: v_targ(llm)
138
139	!---------------------------------------------------------------------
140	! Declarations related to vertical discretization:
141	!---------------------------------------------------------------------
142	REAL :: pzero = 1.e5
143	REAL :: play (llm), zlay (llm), sig_s(llm), plev(llm + 1)
144	REAL :: playd(llm), zlayd(llm), ap_amma(llm + 1), bp_amma(llm + 1)
145
146	!---------------------------------------------------------------------
147	! Declarations related to variables
148	!---------------------------------------------------------------------
149
150	REAL :: phi(llm)
151	REAL :: teta(llm), tetal(llm), temp(llm), u(llm), v(llm), w(llm)
152	REAL rot(1, llm) ! relative vorticity, in s-1
153	REAL :: rlat_rad(1), rlon_rad(1)
154	REAL :: omega(llm), omega2(llm), rho(llm + 1)
155	REAL :: ug(llm), vg(llm), fcoriolis
156	REAL :: sfdt, cfdt
157	REAL :: du_phys(llm), dv_phys(llm), dt_phys(llm)
158	REAL :: w_adv(llm), z_adv(llm)
159	REAL :: d_t_vert_adv(llm), d_u_vert_adv(llm), d_v_vert_adv(llm)
160	REAL :: dt_cooling(llm), d_t_adv(llm), d_t_nudge(llm)
161	REAL :: d_u_nudge(llm), d_v_nudge(llm)
162	! REAL :: d_u_adv(llm),d_v_adv(llm)
163	REAL :: d_u_age(llm), d_v_age(llm)
164	REAL :: alpha
165	REAL :: ttt
166
167	REAL, ALLOCATABLE, DIMENSION(:, :) :: q
168	REAL, ALLOCATABLE, DIMENSION(:, :) :: dq
169	REAL, ALLOCATABLE, DIMENSION(:, :) :: d_q_vert_adv
170	REAL, ALLOCATABLE, DIMENSION(:, :) :: d_q_adv
171	REAL, ALLOCATABLE, DIMENSION(:, :) :: d_q_nudge
172	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
173
174	!---------------------------------------------------------------------
175	! Initialization of surface variables
176	!---------------------------------------------------------------------
177	REAL :: run_off_lic_0(1)
178	REAL :: fder(1), snsrf(1, nbsrf), qsurfsrf(1, nbsrf)
179	REAL :: tsoil(1, nsoilmx, nbsrf)
180	! REAL :: agesno(1,nbsrf)
181
182	!---------------------------------------------------------------------
183	! Call to phyredem
184	!---------------------------------------------------------------------
185	LOGICAL :: ok_writedem = .TRUE.
186	REAL :: sollw_in = 0.
187	REAL :: solsw_in = 0.
188
189	!---------------------------------------------------------------------
190	! Call to physiq
191	!---------------------------------------------------------------------
192	LOGICAL :: firstcall = .TRUE.
193	LOGICAL :: lastcall = .FALSE.
194	REAL :: phis(1) = 0.0
195	REAL :: dpsrf(1)
196
197	!---------------------------------------------------------------------
198	! Initializations of boundary conditions
199	!---------------------------------------------------------------------
200	REAL, ALLOCATABLE :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
201	REAL, ALLOCATABLE :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
202	REAL, ALLOCATABLE :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
203	REAL, ALLOCATABLE :: phy_bil (:) ! Ne sert que pour les slab_ocean
204	REAL, ALLOCATABLE :: phy_rug (:) ! Longueur rugosite utilisee sur land only
205	REAL, ALLOCATABLE :: phy_ice (:) ! Fraction de glace
206	REAL, ALLOCATABLE :: phy_fter(:) ! Fraction de terre
207	REAL, ALLOCATABLE :: phy_foce(:) ! Fraction de ocean
208	REAL, ALLOCATABLE :: phy_fsic(:) ! Fraction de glace
209	REAL, ALLOCATABLE :: phy_flic(:) ! Fraction de glace
210
211	!---------------------------------------------------------------------
212	! Fichiers et d'autres variables
213	!---------------------------------------------------------------------
214	INTEGER :: k, l, i, it = 1, mxcalc
215	INTEGER :: nsrf
216	INTEGER jcode
217	INTEGER read_climoz
218
219	INTEGER :: it_end ! iteration number of the last call
220	!Al1,plev,play,phi,phis,presnivs,
221	INTEGER ecrit_slab_oc !1=ecrit,-1=lit,0=no file
222	data ecrit_slab_oc/-1/
223
224	! if flag_inhib_forcing = 0, tendencies of forcing are added
225	! <> 0, tendencies of forcing are not added
226	INTEGER :: flag_inhib_forcing = 0
227
228	PRINT*, 'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
229
230	!=====================================================================
231	! INITIALIZATIONS
232	!=====================================================================
233	du_phys(:) = 0.
234	dv_phys(:) = 0.
235	dt_phys(:) = 0.
236	d_t_vert_adv(:) = 0.
237	d_u_vert_adv(:) = 0.
238	d_v_vert_adv(:) = 0.
239	dt_cooling(:) = 0.
240	d_t_adv(:) = 0.
241	d_t_nudge(:) = 0.
242	d_u_nudge(:) = 0.
243	d_v_nudge(:) = 0.
244	d_u_adv(:) = 0.
245	d_v_adv(:) = 0.
246	d_u_age(:) = 0.
247	d_v_age(:) = 0.
248
249
250	! Initialization of Common turb_forcing
251	dtime_frcg = 0.
252	Turb_fcg_gcssold = .FALSE.
253	hthturb_gcssold = 0.
254	hqturb_gcssold = 0.
255
256
257
258
259	!---------------------------------------------------------------------
260	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
261	!---------------------------------------------------------------------
262	CALL conf_unicol
263	!Al1 moves this gcssold var from common fcg_gcssold to
264	Turb_fcg_gcssold = xTurb_fcg_gcssold
265	! --------------------------------------------------------------------
266	close(1)
267	WRITE(, ) 'lmdz1d.def lu => unicol.def'
268
269	forcing_SCM = .TRUE.
270	year_ini_cas = 1997
271	! It is possible that those parameters are run twice.
272	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
273
274	CALL getin('anneeref', year_ini_cas)
275	CALL getin('dayref', day_deb)
276	mth_ini_cas = 1 ! pour le moment on compte depuis le debut de l'annee
277	CALL getin('time_ini', heure_ini_cas)
278
279	PRINT*, 'NATURE DE LA SURFACE ', nat_surf
280
281	! Initialization of the LOGICAL switch for nudging
282
283	jcode = iflag_nudge
284	DO i = 1, nudge_max
285	nudge(i) = mod(jcode, 10) >= 1
286	jcode = jcode / 10
287	enddo
288	!-----------------------------------------------------------------------
289	! Definition of the run
290	!-----------------------------------------------------------------------
291
292	CALL conf_gcm(99, .TRUE.)
293
294	!-----------------------------------------------------------------------
295	allocate(phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
296	phy_nat(:) = 0.0
297	allocate(phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
298	allocate(phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
299	allocate(phy_bil (year_len)) ! Ne sert que pour les slab_ocean
300	phy_bil(:) = 1.0
301	allocate(phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
302	allocate(phy_ice (year_len)) ! Fraction de glace
303	phy_ice(:) = 0.0
304	allocate(phy_fter(year_len)) ! Fraction de terre
305	phy_fter(:) = 0.0
306	allocate(phy_foce(year_len)) ! Fraction de ocean
307	phy_foce(:) = 0.0
308	allocate(phy_fsic(year_len)) ! Fraction de glace
309	phy_fsic(:) = 0.0
310	allocate(phy_flic(year_len)) ! Fraction de glace
311	phy_flic(:) = 0.0
312
313
314	!-----------------------------------------------------------------------
315	! Choix du calendrier
316	! -------------------
317
318	! calend = 'earth_365d'
319	IF (calend == 'earth_360d') THEN
320	CALL ioconf_calendar('360_day')
321	WRITE(, )'CALENDRIER CHOISI: Terrestre a 360 jours/an'
322	ELSE IF (calend == 'earth_365d') THEN
323	CALL ioconf_calendar('noleap')
324	WRITE(, )'CALENDRIER CHOISI: Terrestre a 365 jours/an'
325	ELSE IF (calend == 'earth_366d') THEN
326	CALL ioconf_calendar('all_leap')
327	WRITE(, )'CALENDRIER CHOISI: Terrestre bissextile'
328	ELSE IF (calend == 'gregorian') THEN
329	stop 'gregorian calend should not be used by normal user'
330	CALL ioconf_calendar('gregorian') ! not to be used by normal users
331	WRITE(, )'CALENDRIER CHOISI: Gregorien'
332	else
333	write (, ) 'ERROR : unknown calendar ', calend
334	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
335	endif
336	!-----------------------------------------------------------------------
337
338	!c Date :
339	! La date est supposee donnee sous la forme [annee, numero du jour dans
340	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
341	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
342	! Le numero du jour est dans "day". L heure est traitee separement.
343	! La date complete est dans "daytime" (l'unite est le jour).
344
345	IF (nday>0) THEN
346	fnday = nday
347	else
348	fnday = -nday / float(day_step)
349	endif
350	PRINT *, 'fnday=', fnday
351	! start_time doit etre en FRACTION DE JOUR
352	start_time = time_ini / 24.
353
354	annee_ref = anneeref
355	mois = 1
356	day_ref = dayref
357	heure = 0.
358	itau_dyn = 0
359	itau_phy = 0
360	CALL ymds2ju(annee_ref, mois, day_ref, heure, day)
361	day_ini = int(day)
362	day_end = day_ini + int(fnday)
363
364	! Convert the initial date to Julian day
365	day_ini_cas = day_deb
366	PRINT*, 'time case', year_ini_cas, mth_ini_cas, day_ini_cas
367	CALL ymds2ju &
368	(year_ini_cas, mth_ini_cas, day_ini_cas, heure_ini_cas * 3600 &
369	, day_ju_ini_cas)
370	PRINT*, 'time case 2', day_ini_cas, day_ju_ini_cas
371	daytime = day + heure_ini_cas / 24. ! 1st day and initial time of the simulation
372
373	! Print out the actual date of the beginning of the simulation :
374	CALL ju2ymds(daytime, year_print, month_print, day_print, sec_print)
375	PRINT *, ' Time of beginning : ', &
376	year_print, month_print, day_print, sec_print
377
378	!---------------------------------------------------------------------
379	! Initialization of dimensions, geometry and initial state
380	!---------------------------------------------------------------------
381	! CALL init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
382	! but we still need to initialize dimphy module (klon,klev,etc.) here.
383	CALL init_dimphy1D(1, llm)
384	CALL suphel
385	CALL init_infotrac
386
387	IF (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
388	allocate(q(llm, nqtot)) ; q(:, :) = 0.
389	allocate(dq(llm, nqtot))
390	allocate(d_q_vert_adv(llm, nqtot))
391	allocate(d_q_adv(llm, nqtot))
392	allocate(d_q_nudge(llm, nqtot))
393	! allocate(d_th_adv(llm))
394
395	q(:, :) = 0.
396	dq(:, :) = 0.
397	d_q_vert_adv(:, :) = 0.
398	d_q_adv(:, :) = 0.
399	d_q_nudge(:, :) = 0.
400
401	! No ozone climatology need be read in this pre-initialization
402	! (phys_state_var_init is called again in physiq)
403	read_climoz = 0
404	nsw = 6
405
406	CALL phys_state_var_init(read_climoz)
407
408	IF (ngrid/=klon) THEN
409	PRINT*, 'stop in inifis'
410	PRINT*, 'Probleme de dimensions :'
411	PRINT*, 'ngrid = ', ngrid
412	PRINT*, 'klon = ', klon
413	stop
414	endif
415	!!!=====================================================================
416	!!! Feedback forcing values for Gateaux differentiation (al1)
417	!!!=====================================================================
418	!!
419	qsol = qsolinp
420	qsurf = fq_sat(tsurf, psurf / 100.)
421	beta_aridity(:, :) = beta_surf
422	day1 = day_ini
423	time = daytime - day
424	ts_toga(1) = tsurf ! needed by read_tsurf1d.F
425	rho(1) = psurf / (rd * tsurf * (1. + (rv / rd - 1.) * qsurf))
426
427	!! mpl et jyg le 22/08/2012 :
428	!! pour que les cas a flux de surface imposes marchent
429	IF(.NOT.ok_flux_surf.OR.max(abs(wtsurf), abs(wqsurf))>0.) THEN
430	fsens = -wtsurf * rcpd * rho(1)
431	flat = -wqsurf * rlvtt * rho(1)
432	PRINT *, 'Flux: ok_flux wtsurf wqsurf', ok_flux_surf, wtsurf, wqsurf
433	ENDIF
434	PRINT*, 'Flux sol ', fsens, flat
435
436	! Vertical discretization and pressure levels at half and mid levels:
437
438	pa = 5e4
439	!! preff= 1.01325e5
440	preff = psurf
441	IF (ok_old_disvert) THEN
442	CALL disvert0(pa, preff, ap, bp, dpres, presnivs, nivsigs, nivsig)
443	PRINT *, 'On utilise disvert0'
444	aps(1:llm) = 0.5 * (ap(1:llm) + ap(2:llm + 1))
445	bps(1:llm) = 0.5 * (bp(1:llm) + bp(2:llm + 1))
446	scaleheight = 8.
447	pseudoalt(1:llm) = -scaleheight * log(presnivs(1:llm) / preff)
448	ELSE
449	CALL disvert()
450	PRINT *, 'On utilise disvert'
451	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
452	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
453	ENDIF
454
455	sig_s = presnivs / preff
456	plev = ap + bp * psurf
457	play = 0.5 * (plev(1:llm) + plev(2:llm + 1))
458	zlay = -rd * 300. * log(play / psurf) / rg ! moved after reading profiles.
459
460	IF (forcing_type == 59) THEN
461	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
462	WRITE(, ) '***********************'
463	DO l = 1, llm
464	WRITE(, ) 'l,play(l),presnivs(l): ', l, play(l), presnivs(l)
465	IF (trouve_700 .AND. play(l)<=70000) THEN
466	llm700 = l
467	PRINT *, 'llm700,play=', llm700, play(l) / 100.
468	trouve_700 = .FALSE.
469	endif
470	enddo
471	WRITE(, ) '***********************'
472	ENDIF
473
474	!=====================================================================
475	! EVENTUALLY, READ FORCING DATA :
476	!=====================================================================
477
478	INCLUDE "1D_read_forc_cases.h"
479	PRINT, 'A d_t_adv ', d_t_adv(1:20)86400
480
481	IF (forcing_GCM2SCM) THEN
482	write (, ) 'forcing_GCM2SCM not yet implemented'
483	stop 'in initialization'
484	ENDIF ! forcing_GCM2SCM
485
486
487	!=====================================================================
488	! Initialisation de la physique :
489	!=====================================================================
490
491	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
492
493	! day_step, iphysiq lus dans gcm.def ci-dessus
494	! timestep: calcule ci-dessous from rday et day_step
495	! ngrid=1
496	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
497	! rday: defini dans suphel.F (86400.)
498	! day_ini: lu dans run.def (dayref)
499	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
500	! airefi,zcufi,zcvfi initialises au debut de ce programme
501	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
502
503
504	day_step = float(nsplit_phys)*day_step/float(iphysiq)
505	write (, ) 'Time step divided by nsplit_phys (=', nsplit_phys, ')'
506	timestep = rday/day_step
507	dtime_frcg = timestep
508
509	zcufi = airefi
510	zcvfi = airefi
511
512	rlat_rad(1) = xlat*rpi/180.
513	rlon_rad(1) = xlon*rpi/180.
514
515	! iniphysiq will CALL iniaqua who needs year_len from phys_cal_mod
516	year_len_phys_cal_mod = year_len
517
518	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
519	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
520	! with '0.' when necessary
521
522	CALL iniphysiq(iim, jjm, llm, &
523	1, comm_lmdz, &
524	rday, day_ini, timestep, &
525	(/rlat_rad(1), 0./), (/0./), &
526	(/0., 0./), (/rlon_rad(1), 0./), &
527	(/ (/airefi, 0./), (/0., 0./) /), &
528	(/zcufi, 0., 0., 0./), &
529	(/zcvfi, 0./), &
530	ra, rg, rd,rcpd, 1)
531	PRINT*, 'apres iniphysiq'
532
533	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
534	co2_ppm = 330.0
535	solaire = 1370.0
536
537	! Ecriture du startphy avant le premier appel a la physique.
538	! On le met juste avant pour avoir acces a tous les champs
539
540	IF (ok_writedem) THEN
541	!--------------------------------------------------------------------------
542	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
543	! need : qsol fder snow qsurf evap rugos agesno ftsoil
544	!--------------------------------------------------------------------------
545
546	type_ocean = "force"
547	run_off_lic_0(1) = restart_runoff
548	CALL fonte_neige_init(run_off_lic_0)
549
550	fder = 0.
551	snsrf(1, :) = snowmass ! masse de neige des sous surface
552	qsurfsrf(1, :) = qsurf ! humidite de l'air des sous surface
553	fevap = 0.
554	z0m(1, :) = rugos ! couverture de neige des sous surface
555	z0h(1, :) = rugosh ! couverture de neige des sous surface
556	agesno = xagesno
557	tsoil(:, :, :) = tsurf
558	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
559	! tsoil(1,1,1)=299.18
560	! tsoil(1,2,1)=300.08
561	! tsoil(1,3,1)=301.88
562	! tsoil(1,4,1)=305.48
563	! tsoil(1,5,1)=308.00
564	! tsoil(1,6,1)=308.00
565	! tsoil(1,7,1)=308.00
566	! tsoil(1,8,1)=308.00
567	! tsoil(1,9,1)=308.00
568	! tsoil(1,10,1)=308.00
569	! tsoil(1,11,1)=308.00
570	!-----------------------------------------------------------------------
571	CALL pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
572
573	!------------------ prepare limit conditions for limit.nc -----------------
574	!-- Ocean force
575
576	PRINT*, 'avant phyredem'
577	pctsrf(1, :) = 0.
578	IF (nat_surf==0.) THEN
579	pctsrf(1, is_oce) = 1.
580	pctsrf(1, is_ter) = 0.
581	pctsrf(1, is_lic) = 0.
582	pctsrf(1, is_sic) = 0.
583	ELSE IF (nat_surf == 1) THEN
584	pctsrf(1, is_oce) = 0.
585	pctsrf(1, is_ter) = 1.
586	pctsrf(1, is_lic) = 0.
587	pctsrf(1, is_sic) = 0.
588	ELSE IF (nat_surf == 2) THEN
589	pctsrf(1, is_oce) = 0.
590	pctsrf(1, is_ter) = 0.
591	pctsrf(1, is_lic) = 1.
592	pctsrf(1, is_sic) = 0.
593	ELSE IF (nat_surf == 3) THEN
594	pctsrf(1, is_oce) = 0.
595	pctsrf(1, is_ter) = 0.
596	pctsrf(1, is_lic) = 0.
597	pctsrf(1, is_sic) = 1.
598
599	end if
600
601
602	PRINT*, 'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)', nat_surf &
603	, pctsrf(1, is_oce), pctsrf(1, is_ter)
604
605	zmasq = pctsrf(1, is_ter)+pctsrf(1, is_lic)
606	zpic = zpicinp
607	ftsol = tsurf
608	falb_dir= albedo
609	falb_dif = albedo
610	rugoro = rugos
611	t_ancien(1, :)= temp(:)
612	q_ancien(1, :)= q(:, 1)
613	ql_ancien = 0.
614	qs_ancien = 0.
615	prlw_ancien = 0.
616	prsw_ancien = 0.
617	prw_ancien = 0.
618	!jyg<
619	! Etienne: comment those lines since now the TKE is inialized in 1D_read_forc_cases
620	!! pbl_tke(:,:,:)=1.e-8
621	! pbl_tke(:,:,:)=0.
622	! pbl_tke(:,2,:)=1.e-2
623	!>jyg
624	rain_fall = 0.
625	snow_fall = 0.
626	solsw = 0.
627	solswfdiff= 0.
628	sollw = 0.
629	sollwdown = rsigmatsurf*4
630	radsol = 0.
631	rnebcon= 0.
632	ratqs = 0.
633	clwcon = 0.
634	zmax0 = 0.
635	zmea = zsurf
636	zstd= 0.
637	zsig = 0.
638	zgam = 0.
639	zval = 0.
640	zthe = 0.
641	sig1= 0.
642	w01 = 0.
643
644	wake_deltaq = 0.
645	wake_deltat = 0.
646	wake_delta_pbl_TKE(:, :, :) = 0.
647	delta_tsurf = 0.
648	wake_fip = 0.
649	wake_pe = 0.
650	wake_s = 0.
651	awake_s = 0.
652	wake_dens = 0.
653	awake_dens = 0.
654	cv_gen = 0.
655	wake_cstar = 0.
656	ale_bl = 0.
657	ale_bl_trig = 0.
658	alp_bl = 0.
659	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
660	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
661	entr_therm = 0.
662	detr_therm = 0.
663	f0 = 0.
664	fm_therm = 0.
665	u_ancien(1, :)= u(:)
666	v_ancien(1, :)= v(:)
667
668	u10m = 0.
669	v10m = 0.
670	ale_wake = 0.
671	ale_bl_stat = 0.
672	ratqs_inter_(:, :)= 0.002
673
674	!------------------------------------------------------------------------
675	! Make file containing restart for the physics (startphy.nc)
676
677	! NB: List of the variables to be written by phyredem (via put_field):
678	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
679	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
680	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
681	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
682	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
683	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
684	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
685	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
686	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
687
688	! NB2: The content of the startphy.nc file depends on some flags defined in
689	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
690	! to be set at some arbitratry convenient values.
691	!------------------------------------------------------------------------
692	!Al1 =============== restart option ======================================
693	iflag_physiq = 0
694	CALL getin('iflag_physiq', iflag_physiq)
695
696	IF (.NOT.restart) THEN
697	iflag_pbl = 5
698	CALL phyredem ("startphy.nc")
699	else
700	! (desallocations)
701	PRINT*, 'callin surf final'
702	CALL pbl_surface_final(fder, snsrf, qsurfsrf, tsoil)
703	PRINT*, 'after surf final'
704	CALL fonte_neige_final(run_off_lic_0)
705	endif
706
707	ok_writedem = .FALSE.
708	PRINT*,'apres phyredem'
709
710	endif ! ok_writedem
711
712	!------------------------------------------------------------------------
713	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
714	! --------------------------------------------------
715	! NB: List of the variables to be written in limit.nc
716	! (by writelim.F, SUBROUTINE of 1DUTILS.h):
717	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
718	! phy_fter,phy_foce,phy_flic,phy_fsic)
719	!------------------------------------------------------------------------
720	DO i = 1, year_len
721	phy_nat(i) = nat_surf
722	phy_alb(i) = albedo
723	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
724	phy_rug(i) = rugos
725	phy_fter(i) = pctsrf(1, is_ter)
726	phy_foce(i) = pctsrf(1, is_oce)
727	phy_fsic(i) = pctsrf(1, is_sic)
728	phy_flic(i) = pctsrf(1, is_lic)
729	enddo
730
731	! fabrication de limit.nc
732	CALL writelim (1, phy_nat, phy_alb, phy_sst, phy_bil,phy_rug, &
733	phy_ice, phy_fter, phy_foce, phy_flic,phy_fsic)
734
735
736	CALL phys_state_var_end
737	!Al1
738	IF (restart) THEN
739	PRINT*, 'CALL to restart dyn 1d'
740	Call dyn1deta0("start1dyn.nc", plev, play, phi, phis,presnivs, &
741	u, v, temp, q,omega2)
742
743	PRINT*, 'fnday,annee_ref,day_ref,day_ini', &
744	fnday, annee_ref,day_ref, day_ini
745	!** CALL ymds2ju(annee_ref,mois,day_ini,heure,day)
746	day = day_ini
747	day_end = day_ini + nday
748	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
749
750	! Print out the actual date of the beginning of the simulation :
751	CALL ju2ymds(daytime, an, mois, jour, heure)
752	PRINT *, ' Time of beginning : y m d h', an, mois,jour, heure/3600.
753
754	day = int(daytime)
755	time = daytime-day
756
757	PRINT,'*** intialised fields from restart1dyn *****'
758	PRINT*, 'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
759	PRINT*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
760	PRINT*, temp(1), q(1, 1), u(1), v(1), plev(1), phis(1)
761	! raz for safety
762	DO l = 1, llm
763	d_q_vert_adv(l, 1) = 0.
764	enddo
765	endif
766	!====================== end restart =================================
767	IF (ecrit_slab_oc==1) THEN
768	open(97, file = 'div_slab.dat', STATUS = 'UNKNOWN')
769	elseif (ecrit_slab_oc==0) THEN
770	open(97, file = 'div_slab.dat', STATUS = 'OLD')
771	endif
772
773	!=====================================================================
774	IF (CPPKEY_OUTPUTPHYSSCM) THEN
775	CALL iophys_ini(timestep)
776	END IF
777
778	!=====================================================================
779	! START OF THE TEMPORAL LOOP :
780	!=====================================================================
781
782	it_end = nint(fnday*day_step)
783	DO while(it<=it_end)
784
785	IF (prt_level>=1) THEN
786	PRINT*, 'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
787	it, day, time, it_end, day_step
788	PRINT*,'PAS DE TEMPS ', timestep
789	endif
790	IF (it==it_end) lastcall = .True.
791
792	!---------------------------------------------------------------------
793	! Interpolation of forcings in time and onto model levels
794	!---------------------------------------------------------------------
795
796	INCLUDE "1D_interp_cases.h"
797
798	!---------------------------------------------------------------------
799	! Geopotential :
800	!---------------------------------------------------------------------
801	phis(1)= zsurf*RG
802	! phi(1)=phis(1)+RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
803
804	! Calculate geopotential from the ground surface since phi and phis are added in physiq_mod
805	phi(1)= RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
806
807	DO l = 1, llm-1
808	phi(l+1)= phi(l)+RD(temp(l)+temp(l+1)) &
809	(play(l)-play(l+1))/(play(l)+play(l+1))
810	enddo
811
812	!---------------------------------------------------------------------
813	! Vertical advection
814	!---------------------------------------------------------------------
815
816	IF (forc_w+forc_omega > 0) THEN
817
818	IF (forc_w == 1) THEN
819	w_adv = w_mod_cas
820	z_adv = phi/RG
821	ELSE
822	w_adv = omega
823	z_adv =play
824	ENDIF
825
826	teta = temp(pzero/play)*rkappa
827	DO l = 2, llm-1
828	! vertical tendencies computed as d X / d t = -W d X / d z
829	d_u_vert_adv(l)= -w_adv(l)*(u(l+1)-u(l-1))/(z_adv(l+1)-z_adv(l-1))
830	d_v_vert_adv(l)= -w_adv(l)*(v(l+1)-v(l-1))/(z_adv(l+1)-z_adv(l-1))
831	! d theta / dt = -W d theta / d z, transformed into d temp / d t dividing by (pzero/play(l))**rkappa
832	d_t_vert_adv(l)= -w_adv(l)(teta(l+1)-teta(l-1))/(z_adv(l+1)-z_adv(l-1)) / (pzero/play(l))*rkappa
833	d_q_vert_adv(l, 1)= -w_adv(l)*(q(l+1, 1)-q(l-1, 1))/(z_adv(l+1)-z_adv(l-1))
834	enddo
835	d_u_adv(:)= d_u_adv(:)+d_u_vert_adv(:)
836	d_v_adv(:)= d_v_adv(:)+d_v_vert_adv(:)
837	d_t_adv(:)= d_t_adv(:)+d_t_vert_adv(:)
838	d_q_adv(:, 1)= d_q_adv(:, 1)+d_q_vert_adv(:, 1)
839
840	ENDIF
841
842	!---------------------------------------------------------------------
843	! Listing output for debug prt_level>=1
844	!---------------------------------------------------------------------
845	IF (prt_level>=1) THEN
846	PRINT *, ' avant physiq : -------- day time ', day, time
847	WRITE(, ) 'firstcall,lastcall,phis', &
848	firstcall, lastcall, phis
849	end if
850	IF (prt_level>=5) THEN
851	WRITE(*, '(a10,2a4,4a13)') 'BEFOR1 IT=', 'it', 'l', &
852	'presniv', 'plev','play', 'phi'
853	WRITE(*, '(a10,2i4,4f13.2)') ('BEFOR1 IT= ', it, l, &
854	presnivs(l), plev(l), play(l), phi(l), l = 1, llm)
855	WRITE(*, '(a11,2a4,a11,6a8)') 'BEFOR2', 'it', 'l', &
856	'presniv', 'u','v', 'temp', 'q1', 'q2', 'omega2'
857	WRITE(*, '(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ', it, l, &
858	presnivs(l), u(l), v(l), temp(l), q(l, 1), q(l, 2), omega2(l), l = 1, llm)
859	endif
860
861	!---------------------------------------------------------------------
862	! Call physiq :
863	!---------------------------------------------------------------------
864	CALL physiq(ngrid, llm, &
865	firstcall, lastcall, timestep, &
866	plev, play, phi, phis, presnivs, &
867	u, v, rot, temp, q,omega2, &
868	du_phys, dv_phys, dt_phys, dq,dpsrf)
869	firstcall = .FALSE.
870
871	!---------------------------------------------------------------------
872	! Listing output for debug
873	!---------------------------------------------------------------------
874	IF (prt_level>=5) THEN
875	WRITE(*, '(a11,2a4,4a13)') 'AFTER1 IT=', 'it', 'l', &
876	'presniv', 'plev','play', 'phi'
877	WRITE(*, '(a11,2i4,4f13.2)') ('AFTER1 it= ', it, l, &
878	presnivs(l), plev(l), play(l), phi(l), l = 1, llm)
879	WRITE(*, '(a11,2a4,a11,6a8)') 'AFTER2', 'it', 'l', &
880	'presniv', 'u','v', 'temp', 'q1', 'q2', 'omega2'
881	WRITE(*, '(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ', it, l, &
882	presnivs(l), u(l), v(l), temp(l), q(l, 1), q(l, 2), omega2(l), l = 1, llm)
883	WRITE(*, '(a11,2a4,a11,5a8)') 'AFTER3', 'it', 'l', &
884	'presniv', 'du_phys','dv_phys', 'dt_phys', 'dq1', 'dq2'
885	WRITE(*, '(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ', it, l, &
886	presnivs(l), 86400du_phys(l), 86400dv_phys(l), &
887	86400dt_phys(l), 86400dq(l, 1), dq(l, 2), l = 1, llm)
888	WRITE(, ) 'dpsrf', dpsrf
889	endif
890	!---------------------------------------------------------------------
891	! Add physical tendencies :
892	!---------------------------------------------------------------------
893
894	fcoriolis= 2.sin(rpixlat/180.)*romega
895
896	IF (prt_level >= 5) PRINT*, 'fcoriolis, xlat,mxcalc ', &
897	fcoriolis, xlat, mxcalc
898
899	!---------------------------------------------------------------------
900	! Geostrophic forcing
901	!---------------------------------------------------------------------
902
903	IF (forc_geo == 0) THEN
904	d_u_age(1:mxcalc)= 0.
905	d_v_age(1:mxcalc)= 0.
906	ELSE
907	sfdt = sin(0.5fcoriolistimestep)
908	cfdt = cos(0.5fcoriolistimestep)
909
910	d_u_age(1:mxcalc)= -2.sfdt/timestep &
911	(sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
912	cfdt*(v(1:mxcalc)-vg(1:mxcalc)))
913	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
914
915	d_v_age(1:mxcalc)= -2.sfdt/timestep &
916	(cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
917	sfdt*(v(1:mxcalc)-vg(1:mxcalc)))
918	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
919	ENDIF
920
921	!---------------------------------------------------------------------
922	! Nudging
923	! EV: rewrite the section to account for a time- and height-varying
924	! nudging
925	!---------------------------------------------------------------------
926	d_t_nudge(:) = 0.
927	d_u_nudge(:) = 0.
928	d_v_nudge(:) = 0.
929	d_q_nudge(:, :) = 0.
930
931	DO l = 1, llm
932
933	IF (nudging_u < 0) THEN
934
935	d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))*invtau_u_nudg_mod_cas(l)
936
937	ELSE
938
939	IF (play(l) < p_nudging_u .AND. nint(nudging_u) /= 0) &
940	d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
941
942	ENDIF
943
944
945	IF (nudging_v < 0) THEN
946
947	d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))*invtau_v_nudg_mod_cas(l)
948
949	ELSE
950
951
952	IF (play(l) < p_nudging_v .AND. nint(nudging_v) /= 0) &
953	d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
954
955	ENDIF
956
957
958	IF (nudging_t < 0) THEN
959
960	d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))*invtau_temp_nudg_mod_cas(l)
961
962	ELSE
963
964
965	IF (play(l) < p_nudging_t .AND. nint(nudging_t) /= 0) &
966	d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
967
968	ENDIF
969
970
971	IF (nudging_qv < 0) THEN
972
973	d_q_nudge(l, 1)=(qv_nudg_mod_cas(l)-q(l, 1))*invtau_qv_nudg_mod_cas(l)
974
975	ELSE
976
977	IF (play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0) &
978	d_q_nudge(l, 1)=(qv_nudg_mod_cas(l)-q(l, 1))/nudging_qv
979
980	ENDIF
981
982	ENDDO
983
984	!---------------------------------------------------------------------
985	! Optional outputs
986	!---------------------------------------------------------------------
987
988	IF (CPPKEY_OUTPUTPHYSSCM) THEN
989	CALL iophys_ecrit('w_adv', klev, 'w_adv', 'K/day', w_adv)
990	CALL iophys_ecrit('z_adv', klev, 'z_adv', 'K/day', z_adv)
991	CALL iophys_ecrit('dtadv', klev, 'dtadv', 'K/day', 86400*d_t_adv)
992	CALL iophys_ecrit('dtdyn', klev, 'dtdyn', 'K/day', 86400*d_t_vert_adv)
993	CALL iophys_ecrit('qv', klev, 'qv', 'g/kg', 1000*q(:, 1))
994	CALL iophys_ecrit('qvnud', klev, 'qvnud', 'g/kg', 1000*u_nudg_mod_cas)
995	CALL iophys_ecrit('u', klev, 'u', 'm/s', u)
996	CALL iophys_ecrit('unud', klev, 'unud', 'm/s', u_nudg_mod_cas)
997	CALL iophys_ecrit('v', klev, 'v', 'm/s', v)
998	CALL iophys_ecrit('vnud', klev, 'vnud', 'm/s', v_nudg_mod_cas)
999	CALL iophys_ecrit('temp', klev, 'temp', 'K', temp)
1000	CALL iophys_ecrit('tempnud', klev, 'temp_nudg_mod_cas', 'K', temp_nudg_mod_cas)
1001	CALL iophys_ecrit('dtnud', klev, 'dtnud', 'K/day', 86400*d_t_nudge)
1002	CALL iophys_ecrit('dqnud', klev, 'dqnud', 'K/day', 100086400d_q_nudge(:, 1))
1003	END IF
1004
1005	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1006
1007	u(1:mxcalc)= u(1:mxcalc) + timestep*(&
1008	du_phys(1:mxcalc) &
1009	+d_u_age(1:mxcalc)+d_u_adv(1:mxcalc) &
1010	+d_u_nudge(1:mxcalc))
1011	v(1:mxcalc)= v(1:mxcalc) + timestep*(&
1012	dv_phys(1:mxcalc) &
1013	+d_v_age(1:mxcalc)+d_v_adv(1:mxcalc) &
1014	+d_v_nudge(1:mxcalc))
1015	q(1:mxcalc, :)= q(1:mxcalc, :)+timestep*(&
1016	dq(1:mxcalc, :) &
1017	+d_q_adv(1:mxcalc, :) &
1018	+d_q_nudge(1:mxcalc, :))
1019
1020	IF (prt_level>=3) THEN
1021	PRINT *, &
1022	'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1023	temp(1), dt_phys(1), d_t_adv(1), dt_cooling(1)
1024	PRINT*, 'dv_phys=', dv_phys
1025	PRINT* , 'd_v_age=', d_v_age
1026	PRINT*, 'd_v_adv=',d_v_adv
1027	PRINT*, 'd_v_nudge=', d_v_nudge
1028	PRINT*, v
1029	PRINT*, vg
1030	endif
1031
1032	temp(1:mxcalc)= temp(1:mxcalc)+timestep*(&
1033	dt_phys(1:mxcalc) &
1034	+d_t_adv(1:mxcalc) &
1035	+d_t_nudge(1:mxcalc) &
1036	+dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1037
1038
1039	!=======================================================================
1040	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1041	!=======================================================================
1042
1043	teta = temp(pzero/play)*rkappa
1044
1045	!---------------------------------------------------------------------
1046	! Nudge soil temperature if requested
1047	!---------------------------------------------------------------------
1048
1049	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1050	ftsoil(1, isoil_nudge, :) = ftsoil(1, isoil_nudge, :) &
1051	-timestep/tau_soil_nudge*(ftsoil(1, isoil_nudge, :)-Tsoil_nudge)
1052	ENDIF
1053
1054	!---------------------------------------------------------------------
1055	! Add large-scale tendencies (advection, etc) :
1056	!---------------------------------------------------------------------
1057
1058	!cc nrlmd
1059	!cc tmpvar=teta
1060	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1061	!cc
1062	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1063	!cc tmpvar(:)=q(:,1)
1064	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1065	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1066	!cc tmpvar(:)=q(:,2)
1067	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1068	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1069
1070	END IF ! end if tendency of tendency should be added
1071
1072	!---------------------------------------------------------------------
1073	! Air temperature :
1074	!---------------------------------------------------------------------
1075	IF (lastcall) THEN
1076	PRINT*, 'Pas de temps final ', it
1077	CALL ju2ymds(daytime, an, mois, jour, heure)
1078	PRINT*, 'a la date : a m j h', an, mois, jour, heure/3600.
1079	endif
1080
1081	! incremente day time
1082	daytime = daytime+1./day_step
1083	day = int(daytime+0.1/day_step)
1084	! time = max(daytime-day,0.0)
1085	!Al1&jyg: correction de bug
1086	!cc time = real(mod(it,day_step))/day_step
1087	time = time_ini/24.+real(mod(it, day_step))/day_step
1088	it = it+1
1089
1090	enddo
1091
1092	IF (ecrit_slab_oc/=-1) close(97)
1093
1094	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1095	! ---------------------------------------------------------------------------
1096	CALL dyn1dredem("restart1dyn.nc", &
1097	plev, play, phi, phis,presnivs, &
1098	u, v, temp, q,omega2)
1099
1100	CALL abort_gcm ('lmdz1d ', 'The End ', 0)
1101
1102	END SUBROUTINE scm
1103	END MODULE lmdz_scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format