Context Navigation

lmdz_old_lmdz1d.F90 @ 5139

Last change on this file since 5139 was 5139, checked in by abarral, 3 months ago
Put nuage.h, flux_arp.h, compbl.h into modules Move unused phylmd/ini_hist* to obsolete
File size: 55.3 KB

Line
1	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
2
3	MODULE lmdz_old_lmdz1d
4	USE lmdz_old_1dconv, ONLY: copie, get_uvd2, get_uvd, rdgrads, spaces
5	USE lmdz_1dutils, ONLY: interp2_case_vertical, nudge_uv, nudge_rht, lstendh, nudge_uv_init, &
6	nudge_rht_init, disvert0
7	PRIVATE ! -- We'd love to put IMPLICIT NONE; here...
8	PUBLIC old_lmdz1d
9	CONTAINS
10
11	SUBROUTINE old_lmdz1d
12
13	USE ioipsl, ONLY: ju2ymds, ymds2ju, ioconf_calendar, getin
14	USE phys_state_var_mod, ONLY: phys_state_var_init, phys_state_var_end, &
15	clwcon, detr_therm, &
16	qsol, fevap, z0m, z0h, agesno, &
17	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
18	falb_dir, falb_dif, &
19	ftsol, beta_aridity, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
20	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
21	solsw, solswfdiff, t_ancien, q_ancien, u_ancien, v_ancien, rneb_ancien, &
22	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
23	wake_deltaq, wake_deltat, wake_s, awake_s, wake_dens, &
24	awake_dens, cv_gen, wake_cstar, &
25	zgam, zmax0, zmea, zpic, zsig, &
26	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
27	prlw_ancien, prsw_ancien, prw_ancien, &
28	u10m, v10m, ale_wake, ale_bl_stat
29
30	USE dimphy
31	USE surface_data, ONLY: type_ocean, ok_veget
32	USE pbl_surface_mod, ONLY: ftsoil, pbl_surface_init, pbl_surface_final
33	USE fonte_neige_mod, ONLY: fonte_neige_init, fonte_neige_final
34
35	USE infotrac
36	USE control_mod
37	USE indice_sol_mod
38	USE phyaqua_mod
39	USE mod_1D_cases_read2
40	USE mod_1D_amma_read
41	USE lmdz_print_control, ONLY: lunout, prt_level
42	USE iniphysiq_mod, ONLY: iniphysiq
43	USE mod_const_mpi, ONLY: comm_lmdz
44	USE physiq_mod, ONLY: physiq
45	USE comvert_mod, ONLY: presnivs, ap, bp, dpres, nivsig, nivsigs, pa, &
46	preff, aps, bps, pseudoalt, scaleheight
47	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
48	itau_dyn, itau_phy, start_time, year_len
49	USE phys_cal_mod, ONLY: year_len_phys_cal_mod => year_len
50	USE mod_1D_cases_read, ONLY: interp_case_time ! used in included old_1D_read_forc_cases.h
51	USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_OUTPUTPHYSSCM
52	USE lmdz_1dutils, ONLY: fq_sat, conf_unicol, dyn1deta0, dyn1dredem
53	USE lmdz_clesphys
54	USE lmdz_flux_arp, ONLY: fsens, flat, betaevap, ust, tg, ok_flux_surf, ok_prescr_ust, ok_prescr_beta, ok_forc_tsurf
55	USE lmdz_compbl, ONLY: iflag_pbl, iflag_pbl_split, iflag_order2_sollw, ifl_pbltree
56
57	INCLUDE "dimensions.h"
58	INCLUDE "YOMCST.h"
59	INCLUDE "dimsoil.h"
60	INCLUDE "compar1d.h"
61	INCLUDE "date_cas.h"
62	INCLUDE "tsoilnudge.h"
63	INCLUDE "fcg_gcssold.h"
64
65	!=====================================================================
66	! DECLARATIONS
67	!=====================================================================
68	!---------------------------------------------------------------------
69	! Arguments d' initialisations de la physique (USER DEFINE)
70	!---------------------------------------------------------------------
71
72	INTEGER, parameter :: ngrid = 1
73	REAL :: zcufi = 1.
74	REAL :: zcvfi = 1.
75
76	!- REAL :: nat_surf
77	!- LOGICAL :: ok_flux_surf
78	!- REAL :: fsens
79	!- REAL :: flat
80	!- REAL :: tsurf
81	!- REAL :: rugos
82	!- REAL :: qsol(1:2)
83	!- REAL :: qsurf
84	!- REAL :: psurf
85	!- REAL :: zsurf
86	!- REAL :: albedo
87	!-
88	!- REAL :: time = 0.
89	!- REAL :: time_ini
90	!- REAL :: xlat
91	!- REAL :: xlon
92	!- REAL :: wtsurf
93	!- REAL :: wqsurf
94	!- REAL :: restart_runoff
95	!- REAL :: xagesno
96	!- REAL :: qsolinp
97	!- REAL :: zpicinp
98	!-
99	REAL :: fnday
100	REAL :: day, daytime
101	REAL :: day1
102	REAL :: heure
103	INTEGER :: jour
104	INTEGER :: mois
105	INTEGER :: an
106
107	!---------------------------------------------------------------------
108	! Declarations related to forcing and initial profiles
109	!---------------------------------------------------------------------
110
111	INTEGER :: kmax = llm
112	INTEGER llm700, nq1, nq2
113	INTEGER, PARAMETER :: nlev_max = 1000, nqmx = 1000
114	REAL timestep, frac
115	REAL height(nlev_max), tttprof(nlev_max), qtprof(nlev_max)
116	real uprof(nlev_max), vprof(nlev_max), e12prof(nlev_max)
117	real ugprof(nlev_max), vgprof(nlev_max), wfls(nlev_max)
118	real dqtdxls(nlev_max), dqtdyls(nlev_max)
119	real dqtdtls(nlev_max), thlpcar(nlev_max)
120	real qprof(nlev_max, nqmx)
121
122	! INTEGER :: forcing_type
123	LOGICAL :: forcing_les = .FALSE.
124	LOGICAL :: forcing_armcu = .FALSE.
125	LOGICAL :: forcing_rico = .FALSE.
126	LOGICAL :: forcing_radconv = .FALSE.
127	LOGICAL :: forcing_toga = .FALSE.
128	LOGICAL :: forcing_twpice = .FALSE.
129	LOGICAL :: forcing_amma = .FALSE.
130	LOGICAL :: forcing_dice = .FALSE.
131	LOGICAL :: forcing_gabls4 = .FALSE.
132
133	LOGICAL :: forcing_GCM2SCM = .FALSE.
134	LOGICAL :: forcing_GCSSold = .FALSE.
135	LOGICAL :: forcing_sandu = .FALSE.
136	LOGICAL :: forcing_astex = .FALSE.
137	LOGICAL :: forcing_fire = .FALSE.
138	LOGICAL :: forcing_case = .FALSE.
139	LOGICAL :: forcing_case2 = .FALSE.
140	LOGICAL :: forcing_SCM = .FALSE.
141	INTEGER :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
142	! (cf read_tsurf1d.F)
143
144	REAL wwww
145	!vertical advection computation
146	! real d_t_z(llm), d_q_z(llm)
147	! real d_t_dyn_z(llm), dq_dyn_z(llm)
148	! real zz(llm)
149	! real zfact
150
151	!flag forcings
152	LOGICAL :: nudge_wind = .TRUE.
153	LOGICAL :: nudge_thermo = .FALSE.
154	LOGICAL :: cptadvw = .TRUE.
155	!=====================================================================
156	! DECLARATIONS FOR EACH CASE
157	!=====================================================================
158
159	INCLUDE "old_1D_decl_cases.h"
160
161	!---------------------------------------------------------------------
162	! Declarations related to nudging
163	!---------------------------------------------------------------------
164	INTEGER :: nudge_max
165	parameter (nudge_max = 9)
166	INTEGER :: inudge_RHT = 1
167	INTEGER :: inudge_UV = 2
168	LOGICAL :: nudge(nudge_max)
169	REAL :: t_targ(llm)
170	REAL :: rh_targ(llm)
171	REAL :: u_targ(llm)
172	REAL :: v_targ(llm)
173
174	!---------------------------------------------------------------------
175	! Declarations related to vertical discretization:
176	!---------------------------------------------------------------------
177	REAL :: pzero = 1.e5
178	REAL :: play (llm), zlay (llm), sig_s(llm), plev(llm + 1)
179	REAL :: playd(llm), zlayd(llm), ap_amma(llm + 1), bp_amma(llm + 1)
180
181	!---------------------------------------------------------------------
182	! Declarations related to variables
183	!---------------------------------------------------------------------
184
185	REAL :: phi(llm)
186	REAL :: teta(llm), tetal(llm), temp(llm), u(llm), v(llm), w(llm)
187	REAL rot(1, llm) ! relative vorticity, in s-1
188	REAL :: rlat_rad(1), rlon_rad(1)
189	REAL :: omega(llm + 1), omega2(llm), rho(llm + 1)
190	REAL :: ug(llm), vg(llm), fcoriolis
191	REAL :: sfdt, cfdt
192	REAL :: du_phys(llm), dv_phys(llm), dt_phys(llm)
193	REAL :: dt_dyn(llm)
194	REAL :: dt_cooling(llm), d_t_adv(llm), d_t_nudge(llm)
195	REAL :: d_u_nudge(llm), d_v_nudge(llm)
196	REAL :: du_adv(llm), dv_adv(llm)
197	REAL :: du_age(llm), dv_age(llm)
198	REAL :: alpha
199	REAL :: ttt
200
201	REAL, ALLOCATABLE, DIMENSION(:, :) :: q
202	REAL, ALLOCATABLE, DIMENSION(:, :) :: dq
203	REAL, ALLOCATABLE, DIMENSION(:, :) :: dq_dyn
204	REAL, ALLOCATABLE, DIMENSION(:, :) :: d_q_adv
205	REAL, ALLOCATABLE, DIMENSION(:, :) :: d_q_nudge
206	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
207
208	!---------------------------------------------------------------------
209	! Initialization of surface variables
210	!---------------------------------------------------------------------
211	REAL :: run_off_lic_0(1)
212	REAL :: fder(1), snsrf(1, nbsrf), qsurfsrf(1, nbsrf)
213	REAL :: tsoil(1, nsoilmx, nbsrf)
214	! REAL :: agesno(1,nbsrf)
215
216	!---------------------------------------------------------------------
217	! Call to phyredem
218	!---------------------------------------------------------------------
219	LOGICAL :: ok_writedem = .TRUE.
220	REAL :: sollw_in = 0.
221	REAL :: solsw_in = 0.
222
223	!---------------------------------------------------------------------
224	! Call to physiq
225	!---------------------------------------------------------------------
226	LOGICAL :: firstcall = .TRUE.
227	LOGICAL :: lastcall = .FALSE.
228	REAL :: phis(1) = 0.0
229	REAL :: dpsrf(1)
230
231	!---------------------------------------------------------------------
232	! Initializations of boundary conditions
233	!---------------------------------------------------------------------
234	REAL, ALLOCATABLE :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
235	REAL, ALLOCATABLE :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
236	REAL, ALLOCATABLE :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
237	REAL, ALLOCATABLE :: phy_bil (:) ! Ne sert que pour les slab_ocean
238	REAL, ALLOCATABLE :: phy_rug (:) ! Longueur rugosite utilisee sur land only
239	REAL, ALLOCATABLE :: phy_ice (:) ! Fraction de glace
240	REAL, ALLOCATABLE :: phy_fter(:) ! Fraction de terre
241	REAL, ALLOCATABLE :: phy_foce(:) ! Fraction de ocean
242	REAL, ALLOCATABLE :: phy_fsic(:) ! Fraction de glace
243	REAL, ALLOCATABLE :: phy_flic(:) ! Fraction de glace
244
245	!---------------------------------------------------------------------
246	! Fichiers et d'autres variables
247	!---------------------------------------------------------------------
248	INTEGER :: k, l, i, it = 1, mxcalc
249	INTEGER :: nsrf
250	INTEGER jcode
251	INTEGER read_climoz
252
253	INTEGER :: it_end ! iteration number of the last call
254	!Al1
255	INTEGER ecrit_slab_oc !1=ecrit,-1=lit,0=no file
256	data ecrit_slab_oc/-1/
257
258	! if flag_inhib_forcing = 0, tendencies of forcing are added
259	! <> 0, tendencies of forcing are not added
260	INTEGER :: flag_inhib_forcing = 0
261
262	!=====================================================================
263	! INITIALIZATIONS
264	!=====================================================================
265	du_phys(:) = 0.
266	dv_phys(:) = 0.
267	dt_phys(:) = 0.
268	dt_dyn(:) = 0.
269	dt_cooling(:) = 0.
270	d_t_adv(:) = 0.
271	d_t_nudge(:) = 0.
272	d_u_nudge(:) = 0.
273	d_v_nudge(:) = 0.
274	du_adv(:) = 0.
275	dv_adv(:) = 0.
276	du_age(:) = 0.
277	dv_age(:) = 0.
278
279	! Initialization of Common turb_forcing
280	dtime_frcg = 0.
281	Turb_fcg_gcssold = .FALSE.
282	hthturb_gcssold = 0.
283	hqturb_gcssold = 0.
284
285
286
287
288	!---------------------------------------------------------------------
289	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
290	!---------------------------------------------------------------------
291	!Al1
292	CALL conf_unicol
293	!Al1 moves this gcssold var from common fcg_gcssold to
294	Turb_fcg_gcssold = xTurb_fcg_gcssold
295	! --------------------------------------------------------------------
296	close(1)
297	!Al1
298	WRITE(, ) 'lmdz1d.def lu => unicol.def'
299
300	! forcing_type defines the way the SCM is forced:
301	!forcing_type = 0 ==> forcing_les = .TRUE.
302	! initial profiles from file prof.inp.001
303	! no forcing by LS convergence ;
304	! surface temperature imposed ;
305	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
306	!forcing_type = 1 ==> forcing_radconv = .TRUE.
307	! idem forcing_type = 0, but the imposed radiative cooling
308	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
309	! then there is no radiative cooling at all)
310	!forcing_type = 2 ==> forcing_toga = .TRUE.
311	! initial profiles from TOGA-COARE IFA files
312	! LS convergence and SST imposed from TOGA-COARE IFA files
313	!forcing_type = 3 ==> forcing_GCM2SCM = .TRUE.
314	! initial profiles from the GCM output
315	! LS convergence imposed from the GCM output
316	!forcing_type = 4 ==> forcing_twpice = .TRUE.
317	! initial profiles from TWP-ICE cdf file
318	! LS convergence, omega and SST imposed from TWP-ICE files
319	!forcing_type = 5 ==> forcing_rico = .TRUE.
320	! initial profiles from RICO files
321	! LS convergence imposed from RICO files
322	!forcing_type = 6 ==> forcing_amma = .TRUE.
323	! initial profiles from AMMA nc file
324	! LS convergence, omega and surface fluxes imposed from AMMA file
325	!forcing_type = 7 ==> forcing_dice = .TRUE.
326	! initial profiles and large scale forcings in dice_driver.nc
327	! Different stages: soil model alone, atm. model alone
328	! then both models coupled
329	!forcing_type = 8 ==> forcing_gabls4 = .TRUE.
330	! initial profiles and large scale forcings in gabls4_driver.nc
331	!forcing_type >= 100 ==> forcing_case = .TRUE.
332	! initial profiles and large scale forcings in cas.nc
333	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
334	! 101=cindynamo
335	! 102=bomex
336	!forcing_type >= 100 ==> forcing_case2 = .TRUE.
337	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
338	! 103=arm_cu2 ie arm_cu with new forcing format
339	! 104=rico2 ie rico with new forcing format
340	!forcing_type = 40 ==> forcing_GCSSold = .TRUE.
341	! initial profile from GCSS file
342	! LS convergence imposed from GCSS file
343	!forcing_type = 50 ==> forcing_fire = .TRUE.
344	! forcing from fire.nc
345	!forcing_type = 59 ==> forcing_sandu = .TRUE.
346	! initial profiles from sanduref file: see prof.inp.001
347	! SST varying with time and divergence constante: see ifa_sanduref.txt file
348	! Radiation has to be computed interactively
349	!forcing_type = 60 ==> forcing_astex = .TRUE.
350	! initial profiles from file: see prof.inp.001
351	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
352	! Radiation has to be computed interactively
353	!forcing_type = 61 ==> forcing_armcu = .TRUE.
354	! initial profiles from file: see prof.inp.001
355	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
356	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
357	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
358	! Radiation to be switched off
359
360	IF (forcing_type <=0) THEN
361	forcing_les = .TRUE.
362	elseif (forcing_type ==1) THEN
363	forcing_radconv = .TRUE.
364	elseif (forcing_type ==2) THEN
365	forcing_toga = .TRUE.
366	elseif (forcing_type ==3) THEN
367	forcing_GCM2SCM = .TRUE.
368	elseif (forcing_type ==4) THEN
369	forcing_twpice = .TRUE.
370	elseif (forcing_type ==5) THEN
371	forcing_rico = .TRUE.
372	elseif (forcing_type ==6) THEN
373	forcing_amma = .TRUE.
374	elseif (forcing_type ==7) THEN
375	forcing_dice = .TRUE.
376	elseif (forcing_type ==8) THEN
377	forcing_gabls4 = .TRUE.
378	elseif (forcing_type ==101) THEN ! Cindynamo starts 1-10-2011 0h
379	forcing_case = .TRUE.
380	year_ini_cas = 2011
381	mth_ini_cas = 10
382	day_deb = 1
383	heure_ini_cas = 0.
384	pdt_cas = 3 * 3600. ! forcing frequency
385	elseif (forcing_type ==102) THEN ! Bomex starts 24-6-1969 0h
386	forcing_case = .TRUE.
387	year_ini_cas = 1969
388	mth_ini_cas = 6
389	day_deb = 24
390	heure_ini_cas = 0.
391	pdt_cas = 1800. ! forcing frequency
392	elseif (forcing_type ==103) THEN ! Arm_cu starts 21-6-1997 11h30
393	forcing_case2 = .TRUE.
394	year_ini_cas = 1997
395	mth_ini_cas = 6
396	day_deb = 21
397	heure_ini_cas = 11.5
398	pdt_cas = 1800. ! forcing frequency
399	elseif (forcing_type ==104) THEN ! rico starts 16-12-2004 0h
400	forcing_case2 = .TRUE.
401	year_ini_cas = 2004
402	mth_ini_cas = 12
403	day_deb = 16
404	heure_ini_cas = 0.
405	pdt_cas = 1800. ! forcing frequency
406	elseif (forcing_type ==105) THEN ! bomex starts 16-12-2004 0h
407	forcing_case2 = .TRUE.
408	year_ini_cas = 1969
409	mth_ini_cas = 6
410	day_deb = 24
411	heure_ini_cas = 0.
412	pdt_cas = 1800. ! forcing frequency
413	elseif (forcing_type ==106) THEN ! ayotte_24SC starts 6-11-1992 0h
414	forcing_case2 = .TRUE.
415	year_ini_cas = 1992
416	mth_ini_cas = 11
417	day_deb = 6
418	heure_ini_cas = 10.
419	pdt_cas = 86400. ! forcing frequency
420	elseif (forcing_type ==113) THEN ! Arm_cu starts 21-6-1997 11h30
421	forcing_SCM = .TRUE.
422	year_ini_cas = 1997
423	! It is possible that those parameters are run twice.
424	CALL getin('anneeref', year_ini_cas)
425	CALL getin('dayref', day_deb)
426	mth_ini_cas = 1 ! pour le moment on compte depuis le debut de l'annee
427	CALL getin('time_ini', heure_ini_cas)
428	elseif (forcing_type ==40) THEN
429	forcing_GCSSold = .TRUE.
430	elseif (forcing_type ==50) THEN
431	forcing_fire = .TRUE.
432	elseif (forcing_type ==59) THEN
433	forcing_sandu = .TRUE.
434	elseif (forcing_type ==60) THEN
435	forcing_astex = .TRUE.
436	elseif (forcing_type ==61) THEN
437	forcing_armcu = .TRUE.
438	IF(llm/=19.AND.llm/=40) stop 'Erreur nombre de niveaux !!'
439	else
440	write (, ) 'ERROR : unknown forcing_type ', forcing_type
441	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
442	ENDIF
443	PRINT*, "forcing type=", forcing_type
444
445	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
446	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
447	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
448	! through the common sst_forcing.
449
450	type_ts_forcing = 0
451	IF (forcing_toga.OR.forcing_sandu.OR.forcing_astex .OR. forcing_dice) &
452	type_ts_forcing = 1
453
454	! Initialization of the LOGICAL switch for nudging
455	jcode = iflag_nudge
456	do i = 1, nudge_max
457	nudge(i) = mod(jcode, 10) >= 1
458	jcode = jcode / 10
459	enddo
460	!---------------------------------------------------------------------
461	! Definition of the run
462	!---------------------------------------------------------------------
463
464	CALL conf_gcm(99, .TRUE.)
465
466	!-----------------------------------------------------------------------
467	allocate(phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
468	phy_nat(:) = 0.0
469	allocate(phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
470	allocate(phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
471	allocate(phy_bil (year_len)) ! Ne sert que pour les slab_ocean
472	phy_bil(:) = 1.0
473	allocate(phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
474	allocate(phy_ice (year_len)) ! Fraction de glace
475	phy_ice(:) = 0.0
476	allocate(phy_fter(year_len)) ! Fraction de terre
477	phy_fter(:) = 0.0
478	allocate(phy_foce(year_len)) ! Fraction de ocean
479	phy_foce(:) = 0.0
480	allocate(phy_fsic(year_len)) ! Fraction de glace
481	phy_fsic(:) = 0.0
482	allocate(phy_flic(year_len)) ! Fraction de glace
483	phy_flic(:) = 0.0
484	!-----------------------------------------------------------------------
485	! Choix du calendrier
486	! -------------------
487
488	! calend = 'earth_365d'
489	IF (calend == 'earth_360d') THEN
490	CALL ioconf_calendar('360_day')
491	WRITE(, )'CALENDRIER CHOISI: Terrestre a 360 jours/an'
492	ELSE IF (calend == 'earth_365d') THEN
493	CALL ioconf_calendar('noleap')
494	WRITE(, )'CALENDRIER CHOISI: Terrestre a 365 jours/an'
495	ELSE IF (calend == 'earth_366d') THEN
496	CALL ioconf_calendar('all_leap')
497	WRITE(, )'CALENDRIER CHOISI: Terrestre bissextile'
498	ELSE IF (calend == 'gregorian') THEN
499	stop 'gregorian calend should not be used by normal user'
500	CALL ioconf_calendar('gregorian') ! not to be used by normal users
501	WRITE(, )'CALENDRIER CHOISI: Gregorien'
502	else
503	write (, ) 'ERROR : unknown calendar ', calend
504	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
505	endif
506	!-----------------------------------------------------------------------
507
508	!c Date :
509	! La date est supposee donnee sous la forme [annee, numero du jour dans
510	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
511	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
512	! Le numero du jour est dans "day". L heure est traitee separement.
513	! La date complete est dans "daytime" (l'unite est le jour).
514	IF (nday>0) THEN
515	fnday = nday
516	else
517	fnday = -nday / float(day_step)
518	endif
519	print *, 'fnday=', fnday
520	! start_time doit etre en FRACTION DE JOUR
521	start_time = time_ini / 24.
522
523	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
524	IF(forcing_type == 61) fnday = 53100. / 86400.
525	IF(forcing_type == 103) fnday = 53100. / 86400.
526	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
527	IF(forcing_type == 6) fnday = 64800. / 86400.
528	! IF(forcing_type .EQ. 6) fnday=50400./86400.
529	IF(forcing_type == 8) fnday = 129600. / 86400.
530	annee_ref = anneeref
531	mois = 1
532	day_ref = dayref
533	heure = 0.
534	itau_dyn = 0
535	itau_phy = 0
536	CALL ymds2ju(annee_ref, mois, day_ref, heure, day)
537	day_ini = int(day)
538	day_end = day_ini + int(fnday)
539
540	IF (forcing_type ==2) THEN
541	! Convert the initial date of Toga-Coare to Julian day
542	CALL ymds2ju &
543	(year_ini_toga, mth_ini_toga, day_ini_toga, heure, day_ju_ini_toga)
544
545	ELSEIF (forcing_type ==4) THEN
546	! Convert the initial date of TWPICE to Julian day
547	CALL ymds2ju &
548	(year_ini_twpi, mth_ini_twpi, day_ini_twpi, heure_ini_twpi &
549	, day_ju_ini_twpi)
550	ELSEIF (forcing_type ==6) THEN
551	! Convert the initial date of AMMA to Julian day
552	CALL ymds2ju &
553	(year_ini_amma, mth_ini_amma, day_ini_amma, heure_ini_amma &
554	, day_ju_ini_amma)
555	ELSEIF (forcing_type ==7) THEN
556	! Convert the initial date of DICE to Julian day
557	CALL ymds2ju &
558	(year_ini_dice, mth_ini_dice, day_ini_dice, heure_ini_dice &
559	, day_ju_ini_dice)
560	ELSEIF (forcing_type ==8) THEN
561	! Convert the initial date of GABLS4 to Julian day
562	CALL ymds2ju &
563	(year_ini_gabls4, mth_ini_gabls4, day_ini_gabls4, heure_ini_gabls4 &
564	, day_ju_ini_gabls4)
565	ELSEIF (forcing_type >100) THEN
566	! Convert the initial date to Julian day
567	day_ini_cas = day_deb
568	PRINT*, 'time case', year_ini_cas, mth_ini_cas, day_ini_cas
569	CALL ymds2ju &
570	(year_ini_cas, mth_ini_cas, day_ini_cas, heure_ini_cas * 3600 &
571	, day_ju_ini_cas)
572	PRINT*, 'time case 2', day_ini_cas, day_ju_ini_cas
573	ELSEIF (forcing_type ==59) THEN
574	! Convert the initial date of Sandu case to Julian day
575	CALL ymds2ju &
576	(year_ini_sandu, mth_ini_sandu, day_ini_sandu, &
577	time_ini * 3600., day_ju_ini_sandu)
578
579	ELSEIF (forcing_type ==60) THEN
580	! Convert the initial date of Astex case to Julian day
581	CALL ymds2ju &
582	(year_ini_astex, mth_ini_astex, day_ini_astex, &
583	time_ini * 3600., day_ju_ini_astex)
584
585	ELSEIF (forcing_type ==61) THEN
586	! Convert the initial date of Arm_cu case to Julian day
587	CALL ymds2ju &
588	(year_ini_armcu, mth_ini_armcu, day_ini_armcu, heure_ini_armcu &
589	, day_ju_ini_armcu)
590	ENDIF
591
592	IF (forcing_type >100) THEN
593	daytime = day + heure_ini_cas / 24. ! 1st day and initial time of the simulation
594	ELSE
595	daytime = day + time_ini / 24. ! 1st day and initial time of the simulation
596	ENDIF
597	! Print out the actual date of the beginning of the simulation :
598	CALL ju2ymds(daytime, year_print, month_print, day_print, sec_print)
599	print *, ' Time of beginning : ', &
600	year_print, month_print, day_print, sec_print
601
602	!---------------------------------------------------------------------
603	! Initialization of dimensions, geometry and initial state
604	!---------------------------------------------------------------------
605	! CALL init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
606	! but we still need to initialize dimphy module (klon,klev,etc.) here.
607	CALL init_dimphy1D(1, llm)
608	CALL suphel
609	CALL init_infotrac
610
611	IF (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
612	allocate(q(llm, nqtot)) ; q(:, :) = 0.
613	allocate(dq(llm, nqtot))
614	allocate(dq_dyn(llm, nqtot))
615	allocate(d_q_adv(llm, nqtot))
616	allocate(d_q_nudge(llm, nqtot))
617	! allocate(d_th_adv(llm))
618
619	q(:, :) = 0.
620	dq(:, :) = 0.
621	dq_dyn(:, :) = 0.
622	d_q_adv(:, :) = 0.
623	d_q_nudge(:, :) = 0.
624
625	! No ozone climatology need be read in this pre-initialization
626	! (phys_state_var_init is called again in physiq)
627	read_climoz = 0
628	nsw = 6 ! EV et LF: sinon, falb_dir et falb_dif ne peuvent etre alloues
629
630	CALL phys_state_var_init(read_climoz)
631
632	IF (ngrid/=klon) THEN
633	PRINT*, 'stop in inifis'
634	PRINT*, 'Probleme de dimensions :'
635	PRINT*, 'ngrid = ', ngrid
636	PRINT*, 'klon = ', klon
637	stop
638	endif
639	!!!=====================================================================
640	!!! Feedback forcing values for Gateaux differentiation (al1)
641	!!!=====================================================================
642	!!! Surface Planck forcing bracketing CALL radiation
643	!! surf_Planck = 0.
644	!! surf_Conv = 0.
645	!! WRITE(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
646	!!! a mettre dans le lmdz1d.def ou autre
647	!!
648	!!
649	qsol = qsolinp
650	qsurf = fq_sat(tsurf, psurf / 100.)
651	beta_surf = 1.
652	beta_aridity(:, :) = beta_surf
653	day1 = day_ini
654	time = daytime - day
655	ts_toga(1) = tsurf ! needed by read_tsurf1d.F
656	rho(1) = psurf / (rd * tsurf * (1. + (rv / rd - 1.) * qsurf))
657
658	!! mpl et jyg le 22/08/2012 :
659	!! pour que les cas a flux de surface imposes marchent
660	IF(.NOT.ok_flux_surf.OR.max(abs(wtsurf), abs(wqsurf))>0.) THEN
661	fsens = -wtsurf * rcpd * rho(1)
662	flat = -wqsurf * rlvtt * rho(1)
663	print *, 'Flux: ok_flux wtsurf wqsurf', ok_flux_surf, wtsurf, wqsurf
664	ENDIF
665	PRINT*, 'Flux sol ', fsens, flat
666	!! ok_flux_surf=.FALSE.
667	!! fsens=-wtsurfrcpdrho(1)
668	!! flat=-wqsurfrlvttrho(1)
669	!!!!
670
671	! Vertical discretization and pressure levels at half and mid levels:
672
673	pa = 5e4
674	!! preff= 1.01325e5
675	preff = psurf
676	IF (ok_old_disvert) THEN
677	CALL disvert0(pa, preff, ap, bp, dpres, presnivs, nivsigs, nivsig)
678	print *, 'On utilise disvert0'
679	aps(1:llm) = 0.5 * (ap(1:llm) + ap(2:llm + 1))
680	bps(1:llm) = 0.5 * (bp(1:llm) + bp(2:llm + 1))
681	scaleheight = 8.
682	pseudoalt(1:llm) = -scaleheight * log(presnivs(1:llm) / preff)
683	ELSE
684	CALL disvert()
685	print *, 'On utilise disvert'
686	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
687	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
688	ENDIF
689
690	sig_s = presnivs / preff
691	plev = ap + bp * psurf
692	play = 0.5 * (plev(1:llm) + plev(2:llm + 1))
693	zlay = -rd * 300. * log(play / psurf) / rg ! moved after reading profiles
694
695	IF (forcing_type == 59) THEN
696	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
697	WRITE(, ) '***********************'
698	do l = 1, llm
699	WRITE(, ) 'l,play(l),presnivs(l): ', l, play(l), presnivs(l)
700	IF (trouve_700 .AND. play(l)<=70000) THEN
701	llm700 = l
702	print *, 'llm700,play=', llm700, play(l) / 100.
703	trouve_700 = .FALSE.
704	endif
705	enddo
706	WRITE(, ) '***********************'
707	ENDIF
708
709	!=====================================================================
710	! EVENTUALLY, READ FORCING DATA :
711	!=====================================================================
712
713	INCLUDE "old_1D_read_forc_cases.h"
714
715	IF (forcing_GCM2SCM) THEN
716	write (, ) 'forcing_GCM2SCM not yet implemented'
717	stop 'in initialization'
718	END IF ! forcing_GCM2SCM
719
720	PRINT*, 'mxcalc=', mxcalc
721	! PRINT*,'zlay=',zlay(mxcalc)
722	PRINT*, 'play=', play(mxcalc)
723
724	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
725	! EV tg instead of ts_cur
726
727	tg = tsurf ! SST used in read_tsurf1d
728	!=====================================================================
729	! Initialisation de la physique :
730	!=====================================================================
731
732	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
733
734	! day_step, iphysiq lus dans gcm.def ci-dessus
735	! timestep: calcule ci-dessous from rday et day_step
736	! ngrid=1
737	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
738	! rday: defini dans suphel.F (86400.)
739	! day_ini: lu dans run.def (dayref)
740	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
741	! airefi,zcufi,zcvfi initialises au debut de ce programme
742	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
743	day_step = float(nsplit_phys) * day_step / float(iphysiq)
744	write (, ) 'Time step divided by nsplit_phys (=', nsplit_phys, ')'
745	timestep = rday / day_step
746	dtime_frcg = timestep
747
748	zcufi = airefi
749	zcvfi = airefi
750
751	rlat_rad(1) = xlat * rpi / 180.
752	rlon_rad(1) = xlon * rpi / 180.
753
754	! iniphysiq will CALL iniaqua who needs year_len from phys_cal_mod
755	year_len_phys_cal_mod = year_len
756
757	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
758	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
759	! with '0.' when necessary
760	CALL iniphysiq(iim, jjm, llm, &
761	1, comm_lmdz, &
762	rday, day_ini, timestep, &
763	(/rlat_rad(1), 0./), (/0./), &
764	(/0., 0./), (/rlon_rad(1), 0./), &
765	(/ (/airefi, 0./), (/0., 0./) /), &
766	(/zcufi, 0., 0., 0./), &
767	(/zcvfi, 0./), &
768	ra, rg, rd, rcpd, 1)
769	PRINT*, 'apres iniphysiq'
770
771	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
772	co2_ppm = 330.0
773	solaire = 1370.0
774
775	! Ecriture du startphy avant le premier appel a la physique.
776	! On le met juste avant pour avoir acces a tous les champs
777
778	IF (ok_writedem) THEN
779	!--------------------------------------------------------------------------
780	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
781	! need : qsol fder snow qsurf evap rugos agesno ftsoil
782	!--------------------------------------------------------------------------
783
784	type_ocean = "force"
785	run_off_lic_0(1) = restart_runoff
786	CALL fonte_neige_init(run_off_lic_0)
787
788	fder = 0.
789	snsrf(1, :) = snowmass ! masse de neige des sous surface
790	print *, 'snsrf', snsrf
791	qsurfsrf(1, :) = qsurf ! humidite de l'air des sous surface
792	fevap = 0.
793	z0m(1, :) = rugos ! couverture de neige des sous surface
794	z0h(1, :) = rugosh ! couverture de neige des sous surface
795	agesno = xagesno
796	tsoil(:, :, :) = tsurf
797	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
798	! tsoil(1,1,1)=299.18
799	! tsoil(1,2,1)=300.08
800	! tsoil(1,3,1)=301.88
801	! tsoil(1,4,1)=305.48
802	! tsoil(1,5,1)=308.00
803	! tsoil(1,6,1)=308.00
804	! tsoil(1,7,1)=308.00
805	! tsoil(1,8,1)=308.00
806	! tsoil(1,9,1)=308.00
807	! tsoil(1,10,1)=308.00
808	! tsoil(1,11,1)=308.00
809	!-----------------------------------------------------------------------
810	CALL pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
811
812	!------------------ prepare limit conditions for limit.nc -----------------
813	!-- Ocean force
814
815	PRINT*, 'avant phyredem'
816	pctsrf(1, :) = 0.
817	IF (nat_surf==0.) THEN
818	pctsrf(1, is_oce) = 1.
819	pctsrf(1, is_ter) = 0.
820	pctsrf(1, is_lic) = 0.
821	pctsrf(1, is_sic) = 0.
822	ELSE IF (nat_surf == 1) THEN
823	pctsrf(1, is_oce) = 0.
824	pctsrf(1, is_ter) = 1.
825	pctsrf(1, is_lic) = 0.
826	pctsrf(1, is_sic) = 0.
827	ELSE IF (nat_surf == 2) THEN
828	pctsrf(1, is_oce) = 0.
829	pctsrf(1, is_ter) = 0.
830	pctsrf(1, is_lic) = 1.
831	pctsrf(1, is_sic) = 0.
832	ELSE IF (nat_surf == 3) THEN
833	pctsrf(1, is_oce) = 0.
834	pctsrf(1, is_ter) = 0.
835	pctsrf(1, is_lic) = 0.
836	pctsrf(1, is_sic) = 1.
837
838	end if
839
840	PRINT*, 'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)', nat_surf &
841	, pctsrf(1, is_oce), pctsrf(1, is_ter)
842
843	zmasq = pctsrf(1, is_ter) + pctsrf(1, is_lic)
844	zpic = zpicinp
845	ftsol = tsurf
846	falb_dir = albedo
847	falb_dif = albedo
848	rugoro = rugos
849	t_ancien(1, :) = temp(:)
850	q_ancien(1, :) = q(:, 1)
851	ql_ancien = 0.
852	qs_ancien = 0.
853	prlw_ancien = 0.
854	prsw_ancien = 0.
855	prw_ancien = 0.
856	!jyg<
857	!! pbl_tke(:,:,:)=1.e-8
858	pbl_tke(:, :, :) = 0.
859	pbl_tke(:, 2, :) = 1.e-2
860	PRINT *, ' pbl_tke dans lmdz1d '
861	IF (prt_level >= 5) THEN
862	DO nsrf = 1, 4
863	PRINT *, 'pbl_tke(1,:,', nsrf, ') ', pbl_tke(1, :, nsrf)
864	ENDDO
865	end if
866
867	!>jyg
868
869	rain_fall = 0.
870	snow_fall = 0.
871	solsw = 0.
872	solswfdiff = 0.
873	sollw = 0.
874	sollwdown = rsigma * tsurf**4
875	radsol = 0.
876	rnebcon = 0.
877	ratqs = 0.
878	clwcon = 0.
879	zmax0 = 0.
880	zmea = zsurf
881	zstd = 0.
882	zsig = 0.
883	zgam = 0.
884	zval = 0.
885	zthe = 0.
886	sig1 = 0.
887	w01 = 0.
888
889	wake_deltaq = 0.
890	wake_deltat = 0.
891	wake_delta_pbl_TKE(:, :, :) = 0.
892	delta_tsurf = 0.
893	wake_fip = 0.
894	wake_pe = 0.
895	wake_s = 0.
896	awake_s = 0.
897	wake_dens = 0.
898	awake_dens = 0.
899	cv_gen = 0.
900	wake_cstar = 0.
901	ale_bl = 0.
902	ale_bl_trig = 0.
903	alp_bl = 0.
904	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
905	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
906	entr_therm = 0.
907	detr_therm = 0.
908	f0 = 0.
909	fm_therm = 0.
910	u_ancien(1, :) = u(:)
911	v_ancien(1, :) = v(:)
912	rneb_ancien(1, :) = 0.
913
914	u10m = 0.
915	v10m = 0.
916	ale_wake = 0.
917	ale_bl_stat = 0.
918
919	!------------------------------------------------------------------------
920	! Make file containing restart for the physics (startphy.nc)
921
922	! NB: List of the variables to be written by phyredem (via put_field):
923	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
924	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
925	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
926	! radsol,solsw,solswfdiff,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
927	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
928	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
929	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
930	! wake_deltat,wake_deltaq,wake_s,awake_s,wake_dens,awake_dens,cv_gen,wake_cstar,
931	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
932
933	! NB2: The content of the startphy.nc file depends on some flags defined in
934	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
935	! to be set at some arbitratry convenient values.
936	!------------------------------------------------------------------------
937	!Al1 =============== restart option ==========================
938	iflag_physiq = 0
939	CALL getin('iflag_physiq', iflag_physiq)
940
941	IF (.NOT.restart) THEN
942	iflag_pbl = 5
943	CALL phyredem ("startphy.nc")
944	else
945	! (desallocations)
946	PRINT*, 'callin surf final'
947	CALL pbl_surface_final(fder, snsrf, qsurfsrf, tsoil)
948	PRINT*, 'after surf final'
949	CALL fonte_neige_final(run_off_lic_0)
950	endif
951
952	ok_writedem = .FALSE.
953	PRINT*, 'apres phyredem'
954
955	END IF ! ok_writedem
956
957	!------------------------------------------------------------------------
958	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
959	! --------------------------------------------------
960	! NB: List of the variables to be written in limit.nc
961	! (by writelim.F, SUBROUTINE of 1DUTILS.h):
962	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
963	! phy_fter,phy_foce,phy_flic,phy_fsic)
964	!------------------------------------------------------------------------
965	DO i = 1, year_len
966	phy_nat(i) = nat_surf
967	phy_alb(i) = albedo
968	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
969	phy_rug(i) = rugos
970	phy_fter(i) = pctsrf(1, is_ter)
971	phy_foce(i) = pctsrf(1, is_oce)
972	phy_fsic(i) = pctsrf(1, is_sic)
973	phy_flic(i) = pctsrf(1, is_lic)
974	END DO
975
976	! fabrication de limit.nc
977	CALL writelim (1, phy_nat, phy_alb, phy_sst, phy_bil, phy_rug, &
978	phy_ice, phy_fter, phy_foce, phy_flic, phy_fsic)
979
980	CALL phys_state_var_end
981	!Al1
982	IF (restart) THEN
983	PRINT*, 'CALL to restart dyn 1d'
984	Call dyn1deta0("start1dyn.nc", plev, play, phi, phis, presnivs, &
985	u, v, temp, q, omega2)
986
987	PRINT*, 'fnday,annee_ref,day_ref,day_ini', &
988	fnday, annee_ref, day_ref, day_ini
989	!** CALL ymds2ju(annee_ref,mois,day_ini,heure,day)
990	day = day_ini
991	day_end = day_ini + nday
992	daytime = day + time_ini / 24. ! 1st day and initial time of the simulation
993
994	! Print out the actual date of the beginning of the simulation :
995	CALL ju2ymds(daytime, an, mois, jour, heure)
996	print *, ' Time of beginning : y m d h', an, mois, jour, heure / 3600.
997
998	day = int(daytime)
999	time = daytime - day
1000
1001	PRINT, '*** intialised fields from restart1dyn *****'
1002	PRINT*, 'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
1003	PRINT*, 'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
1004	PRINT*, temp(1), q(1, 1), u(1), v(1), plev(1), phis
1005	! raz for safety
1006	do l = 1, llm
1007	dq_dyn(l, 1) = 0.
1008	enddo
1009	END IF
1010	!Al1 ================ end restart =================================
1011	IF (ecrit_slab_oc==1) THEN
1012	open(97, file = 'div_slab.dat', STATUS = 'UNKNOWN')
1013	elseif (ecrit_slab_oc==0) THEN
1014	open(97, file = 'div_slab.dat', STATUS = 'OLD')
1015	END IF
1016
1017	!---------------------------------------------------------------------
1018	! Initialize target profile for RHT nudging if needed
1019	!---------------------------------------------------------------------
1020	IF (nudge(inudge_RHT)) THEN
1021	CALL nudge_RHT_init(plev, play, temp, q(:, 1), t_targ, rh_targ)
1022	END IF
1023	IF (nudge(inudge_UV)) THEN
1024	CALL nudge_UV_init(plev, play, u, v, u_targ, v_targ)
1025	END IF
1026
1027	!=====================================================================
1028	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1029	CALL iophys_ini(timestep)
1030	END IF
1031	! START OF THE TEMPORAL LOOP :
1032	!=====================================================================
1033
1034	it_end = nint(fnday * day_step)
1035	!test JLD it_end = 10
1036	DO while(it<=it_end)
1037
1038	IF (prt_level>=1) THEN
1039	PRINT*, 'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1040	it, day, time, it_end, day_step
1041	PRINT*, 'PAS DE TEMPS ', timestep
1042	endif
1043	!Al1 demande de restartphy.nc
1044	IF (it==it_end) lastcall = .True.
1045
1046	!---------------------------------------------------------------------
1047	! Geopotential :
1048	!---------------------------------------------------------------------
1049
1050	phi(1) = RD * temp(1) * (plev(1) - play(1)) / (.5 * (plev(1) + play(1)))
1051	do l = 1, llm - 1
1052	phi(l + 1) = phi(l) + RD * (temp(l) + temp(l + 1)) * &
1053	(play(l) - play(l + 1)) / (play(l) + play(l + 1))
1054	enddo
1055
1056	!---------------------------------------------------------------------
1057	! Interpolation of forcings in time and onto model levels
1058	!---------------------------------------------------------------------
1059
1060	INCLUDE "old_1D_interp_cases.h"
1061
1062	IF (forcing_GCM2SCM) THEN
1063	write (, ) 'forcing_GCM2SCM not yet implemented'
1064	stop 'in time loop'
1065	END IF ! forcing_GCM2SCM
1066
1067	!!!!---------------------------------------------------------------------
1068	!!!! Geopotential :
1069	!!!!---------------------------------------------------------------------
1070	!!!
1071	!!! phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1072	!!! do l = 1, llm-1
1073	!!! phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1074	!!! & (play(l)-play(l+1))/(play(l)+play(l+1))
1075	!!! enddo
1076
1077	!---------------------------------------------------------------------
1078	! Listing output for debug prt_level>=1
1079	!---------------------------------------------------------------------
1080	IF (prt_level>=1) THEN
1081	print *, ' avant physiq : -------- day time ', day, time
1082	WRITE(, ) 'firstcall,lastcall,phis', &
1083	firstcall, lastcall, phis
1084	end if
1085	IF (prt_level>=5) THEN
1086	WRITE(*, '(a10,2a4,4a13)') 'BEFOR1 IT=', 'it', 'l', &
1087	'presniv', 'plev', 'play', 'phi'
1088	WRITE(*, '(a10,2i4,4f13.2)') ('BEFOR1 IT= ', it, l, &
1089	presnivs(l), plev(l), play(l), phi(l), l = 1, llm)
1090	WRITE(*, '(a11,2a4,a11,6a8)') 'BEFOR2', 'it', 'l', &
1091	'presniv', 'u', 'v', 'temp', 'q1', 'q2', 'omega2'
1092	WRITE(*, '(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ', it, l, &
1093	presnivs(l), u(l), v(l), temp(l), q(l, 1), q(l, 2), omega2(l), l = 1, llm)
1094	END IF
1095
1096	!---------------------------------------------------------------------
1097	! Call physiq :
1098	!---------------------------------------------------------------------
1099	CALL physiq(ngrid, llm, &
1100	firstcall, lastcall, timestep, &
1101	plev, play, phi, phis, presnivs, &
1102	u, v, rot, temp, q, omega2, &
1103	du_phys, dv_phys, dt_phys, dq, dpsrf)
1104	firstcall = .FALSE.
1105
1106	!---------------------------------------------------------------------
1107	! Listing output for debug
1108	!---------------------------------------------------------------------
1109	IF (prt_level>=5) THEN
1110	WRITE(*, '(a11,2a4,4a13)') 'AFTER1 IT=', 'it', 'l', &
1111	'presniv', 'plev', 'play', 'phi'
1112	WRITE(*, '(a11,2i4,4f13.2)') ('AFTER1 it= ', it, l, &
1113	presnivs(l), plev(l), play(l), phi(l), l = 1, llm)
1114	WRITE(*, '(a11,2a4,a11,6a8)') 'AFTER2', 'it', 'l', &
1115	'presniv', 'u', 'v', 'temp', 'q1', 'q2', 'omega2'
1116	WRITE(*, '(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ', it, l, &
1117	presnivs(l), u(l), v(l), temp(l), q(l, 1), q(l, 2), omega2(l), l = 1, llm)
1118	WRITE(*, '(a11,2a4,a11,5a8)') 'AFTER3', 'it', 'l', &
1119	'presniv', 'du_phys', 'dv_phys', 'dt_phys', 'dq1', 'dq2'
1120	WRITE(*, '(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ', it, l, &
1121	presnivs(l), 86400 * du_phys(l), 86400 * dv_phys(l), &
1122	86400 * dt_phys(l), 86400 * dq(l, 1), dq(l, 2), l = 1, llm)
1123	WRITE(, ) 'dpsrf', dpsrf
1124	END IF
1125	!---------------------------------------------------------------------
1126	! Add physical tendencies :
1127	!---------------------------------------------------------------------
1128
1129	fcoriolis = 2. * sin(rpi * xlat / 180.) * romega
1130	IF (forcing_radconv .OR. forcing_fire) THEN
1131	fcoriolis = 0.0
1132	dt_cooling = 0.0
1133	d_t_adv = 0.0
1134	d_q_adv = 0.0
1135	END IF
1136	! PRINT*, 'calcul de fcoriolis ', fcoriolis
1137
1138	IF (forcing_toga .OR. forcing_GCSSold .OR. forcing_twpice &
1139	.OR.forcing_amma .OR. forcing_type==101) THEN
1140	fcoriolis = 0.0 ; ug = 0. ; vg = 0.
1141	END IF
1142
1143	IF(forcing_rico) THEN
1144	dt_cooling = 0.
1145	END IF
1146
1147	!CRio:Attention modif sp??cifique cas de Caroline
1148	IF (forcing_type==-1) THEN
1149	fcoriolis = 0.
1150	!Nudging
1151
1152	!on calcule dt_cooling
1153	do l = 1, llm
1154	IF (play(l)>=20000.) THEN
1155	dt_cooling(l) = -1.5 / 86400.
1156	elseif ((play(l)>=10000.).AND.((play(l)<20000.))) THEN
1157	dt_cooling(l) = -1.5 / 86400. * (play(l) - 10000.) / (10000.) - 1. / 86400. * (20000. - play(l)) / 10000. * (temp(l) - 200.)
1158	else
1159	dt_cooling(l) = -1. * (temp(l) - 200.) / 86400.
1160	endif
1161	enddo
1162
1163	END IF
1164	!RC
1165	IF (forcing_sandu) THEN
1166	ug(1:llm) = u_mod(1:llm)
1167	vg(1:llm) = v_mod(1:llm)
1168	END IF
1169
1170	IF (prt_level >= 5) PRINT*, 'fcoriolis, xlat,mxcalc ', &
1171	fcoriolis, xlat, mxcalc
1172
1173	! print *,'u-ug=',u-ug
1174
1175	!!!!!!!!!!!!!!!!!!!!!!!!
1176	! Geostrophic wind
1177	! Le calcul ci dessous est insuffisamment precis
1178	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1179	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1180	!!!!!!!!!!!!!!!!!!!!!!!!
1181	sfdt = sin(0.5 * fcoriolis * timestep)
1182	cfdt = cos(0.5 * fcoriolis * timestep)
1183	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1184
1185	du_age(1:mxcalc) = -2. * sfdt / timestep * &
1186	(sfdt * (u(1:mxcalc) - ug(1:mxcalc)) - &
1187	cfdt * (v(1:mxcalc) - vg(1:mxcalc)))
1188	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1189
1190	dv_age(1:mxcalc) = -2. * sfdt / timestep * &
1191	(cfdt * (u(1:mxcalc) - ug(1:mxcalc)) + &
1192	sfdt * (v(1:mxcalc) - vg(1:mxcalc)))
1193	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1194
1195	!!!!!!!!!!!!!!!!!!!!!!!!
1196	! Nudging
1197	!!!!!!!!!!!!!!!!!!!!!!!!
1198	d_t_nudge(:) = 0.
1199	d_q_nudge(:, :) = 0.
1200	d_u_nudge(:) = 0.
1201	d_v_nudge(:) = 0.
1202	IF (nudge(inudge_RHT)) THEN
1203	CALL nudge_RHT(timestep, plev, play, t_targ, rh_targ, temp, q(:, 1), &
1204	d_t_nudge, d_q_nudge(:, 1))
1205	END IF
1206	IF (nudge(inudge_UV)) THEN
1207	CALL nudge_UV(timestep, plev, play, u_targ, v_targ, u, v, &
1208	d_u_nudge, d_v_nudge)
1209	END IF
1210
1211	IF (forcing_fire) THEN
1212
1213	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1214	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1215	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1216	d_t_adv = 0.
1217	d_q_adv = 0.
1218	teta = temp * (pzero / play)**rkappa
1219	d_t_adv = 0.
1220	d_q_adv = 0.
1221	do l = 2, llm - 1
1222	IF (zlay(l)<=1100) THEN
1223	wwww = -0.00001 * zlay(l)
1224	d_t_adv(l) = -wwww * (teta(l) - teta(l + 1)) / (zlay(l) - zlay(l + 1)) / (pzero / play(l))**rkappa
1225	d_q_adv(l, 1:2) = -wwww * (q(l, 1:2) - q(l + 1, 1:2)) / (zlay(l) - zlay(l + 1))
1226	d_t_adv(l) = d_t_adv(l) + min(-3.75e-5, -7.5e-8 * zlay(l))
1227	d_q_adv(l, 1) = d_q_adv(l, 1) + max(1.5e-8, 3e-11 * zlay(l))
1228	endif
1229	enddo
1230
1231	END IF
1232
1233	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1234	! call writefield_phy('dv_age' ,dv_age,llm)
1235	! call writefield_phy('du_age' ,du_age,llm)
1236	! call writefield_phy('du_phys' ,du_phys,llm)
1237	! call writefield_phy('u_tend' ,u,llm)
1238	! call writefield_phy('u_g' ,ug,llm)
1239
1240	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1241	!! Increment state variables
1242	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1243	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1244
1245	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1246	! au dessus de 700hpa, on relaxe vers les profils initiaux
1247	IF (forcing_sandu .OR. forcing_astex) THEN
1248	INCLUDE "1D_nudge_sandu_astex.h"
1249	else
1250	u(1:mxcalc) = u(1:mxcalc) + timestep * (&
1251	du_phys(1:mxcalc) &
1252	+ du_age(1:mxcalc) + du_adv(1:mxcalc) &
1253	+ d_u_nudge(1:mxcalc))
1254	v(1:mxcalc) = v(1:mxcalc) + timestep * (&
1255	dv_phys(1:mxcalc) &
1256	+ dv_age(1:mxcalc) + dv_adv(1:mxcalc) &
1257	+ d_v_nudge(1:mxcalc))
1258	q(1:mxcalc, :) = q(1:mxcalc, :) + timestep * (&
1259	dq(1:mxcalc, :) &
1260	+ d_q_adv(1:mxcalc, :) &
1261	+ d_q_nudge(1:mxcalc, :))
1262
1263	IF (prt_level>=3) THEN
1264	print *, &
1265	'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1266	temp(1), dt_phys(1), d_t_adv(1), dt_cooling(1)
1267	PRINT*, 'dv_phys=', dv_phys
1268	PRINT*, 'dv_age=', dv_age
1269	PRINT*, 'dv_adv=', dv_adv
1270	PRINT*, 'd_v_nudge=', d_v_nudge
1271	PRINT*, v
1272	PRINT*, vg
1273	endif
1274
1275	temp(1:mxcalc) = temp(1:mxcalc) + timestep * (&
1276	dt_phys(1:mxcalc) &
1277	+ d_t_adv(1:mxcalc) &
1278	+ d_t_nudge(1:mxcalc) &
1279	+ dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1280
1281	IF (CPPKEY_OUTPUTPHYSSCM) THEN
1282	CALL iophys_ecrit('d_t_adv', klev, 'd_t_adv', 'm/s', d_t_adv)
1283	CALL iophys_ecrit('d_t_nudge', klev, 'd_t_nudge', 'm/s', d_t_nudge)
1284	END IF
1285
1286	endif ! forcing_sandu or forcing_astex
1287
1288	teta = temp * (pzero / play)**rkappa
1289
1290	!---------------------------------------------------------------------
1291	! Nudge soil temperature if requested
1292	!---------------------------------------------------------------------
1293
1294	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1295	ftsoil(1, isoil_nudge, :) = ftsoil(1, isoil_nudge, :) &
1296	- timestep / tau_soil_nudge * (ftsoil(1, isoil_nudge, :) - Tsoil_nudge)
1297	ENDIF
1298
1299	!---------------------------------------------------------------------
1300	! Add large-scale tendencies (advection, etc) :
1301	!---------------------------------------------------------------------
1302
1303	!cc nrlmd
1304	!cc tmpvar=teta
1305	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1306	!cc
1307	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1308	!cc tmpvar(:)=q(:,1)
1309	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1310	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1311	!cc tmpvar(:)=q(:,2)
1312	!cc CALL advect_vert(llm,omega,timestep,tmpvar,plev)
1313	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1314
1315	END IF ! end if tendency of tendency should be added
1316
1317	!---------------------------------------------------------------------
1318	! Air temperature :
1319	!---------------------------------------------------------------------
1320	IF (lastcall) THEN
1321	PRINT*, 'Pas de temps final ', it
1322	CALL ju2ymds(daytime, an, mois, jour, heure)
1323	PRINT*, 'a la date : a m j h', an, mois, jour, heure / 3600.
1324	END IF
1325
1326	! incremente day time
1327	! PRINT*,'daytime bef',daytime,1./day_step
1328	daytime = daytime + 1. / day_step
1329	!Al1dbg
1330	day = int(daytime + 0.1 / day_step)
1331	! time = max(daytime-day,0.0)
1332	!Al1&jyg: correction de bug
1333	!cc time = real(mod(it,day_step))/day_step
1334	time = time_ini / 24. + real(mod(it, day_step)) / day_step
1335	! PRINT*,'daytime nxt time',daytime,time
1336	it = it + 1
1337
1338	END DO
1339
1340	!Al1
1341	IF (ecrit_slab_oc/=-1) close(97)
1342
1343	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1344	! -------------------------------------
1345	CALL dyn1dredem("restart1dyn.nc", &
1346	plev, play, phi, phis, presnivs, &
1347	u, v, temp, q, omega2)
1348
1349	CALL abort_gcm ('lmdz1d ', 'The End ', 0)
1350
1351	END SUBROUTINE old_lmdz1d
1352
1353	INCLUDE "old_1DUTILS_read_interp.h"
1354	END MODULE lmdz_old_lmdz1d

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format