Context Navigation

lmdz_cosp_interface.F90 @ 5158

Last change on this file since 5158 was 5158, checked in by abarral, 3 months ago
Add missing klon on strataer_emiss_mod.F90 Correct various missing explicit declarations Replace tabs by spaces (tabs are not part of the fortran charset) Continue cleaning modules Removed unused arguments and variables
File size: 24.9 KB

Line
1	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
2
3	! Nouveau code d'interface entre LMDZ et COSPv2 (version 2)
4	! L'ancienne interface s'appelait "phys_cosp2" et avait ete concue pour COSPv1.4.
5	! Dans cette nouvelle version de COSP, le code a ete restructure pour optimiser les calculs
6	! des differents simulateurs et pour proposer de nouvelles fonctionnalites (par exemple,
7	! intervenir sur les profils sous-maille, ou subcolumns, donnes en entre a COSP afin que
8	! leur definition soit coherente avec les parametrisations du modele hote).
9	! Cette version de COSP propose aussi de nombreux nouveaux diagnostics, notamment pour
10	! le simulateur lidar (diagnostics CALIPSO-OPAQ, lidar sol 532nm et lidar ATLID 355nm).
11
12	! Interface reecrite par R.Guzman (01/2019), a partir de l'interface initiale concue
13	! et ecrite par A.Idelkadi
14
15	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
16	! subroutine phys_cosp2( itap,dtime,freq_cosp, &
17	subroutine lmdz_cosp_interface(itap, dtime, freq_cosp, ok_mensuelCOSP, ok_journeCOSP, &
18	ok_hfCOSP, ecrit_mth, ecrit_day, ecrit_hf, ok_all_xml, &
19	missing_val, Nptslmdz, Nlevlmdz, lon, lat, presnivs, &
20	overlaplmdz, sunlit, ref_liq, ref_ice, fracTerLic, &
21	u_wind, v_wind, phis, phi, ph, p, skt, t, sh, rh, &
22	tca, cca, mr_lsliq, mr_lsice, fl_lsrainI, fl_lssnowI, &
23	fl_ccrainI, fl_ccsnowI, mr_ozone, dtau_s, dem_s)
24
25	!-------------- Inputs ---------------
26	! itap, !Increment de la physiq
27	! dtime, !Pas de temps physiq
28	! overlaplmdz, !Type Overlap venant de LMDZ
29	! Npoints, !Nb de points de la grille physiq
30	! Nlevels, !Nb de niveaux verticaux
31	! Ncolumns, !Number of subcolumns
32	! lon,lat, !Longitudes et latitudes de la grille LMDZ
33	! ref_liq, ref_ice, !Rayons effectifs des particules liq et ice (en micron)
34	! fracTerLic, !Fraction terre a convertir en masque
35	! u_wind, v_wind, !Vents a 10m ???
36	! phi, !Geopotentiel
37	! phis, !Geopotentiel sol
38	! ph, !pression pour chaque inter-couche
39	! p, !Pression aux milieux des couches
40	! skt, t, !Temp au sol et temp 3D
41	! sh, !Humidite specifique
42	! rh, !Humidite relative
43	! tca, !Fraction nuageuse
44	! cca !Fraction nuageuse convective
45	! mr_lsliq, !Liq Cloud water content
46	! mr_lsice, !Ice Cloud water content
47	! mr_ccliq, !Convective Cloud Liquid water content
48	! mr_ccice, !Cloud ice water content
49	! fl_lsrain, !Large scale precipitation lic
50	! fl_lssnow, !Large scale precipitation ice
51	! fl_ccrain, !Convective precipitation lic
52	! fl_ccsnow, !Convective precipitation ice
53	! mr_ozone, !Concentration ozone (Kg/Kg)
54	! dem_s !Cloud optical emissivity
55	! dtau_s !Cloud optical thickness
56	! emsfc_lw = 1. !Surface emissivity dans radlwsw.F90
57
58
59	!-------------- Outputs --------------
60	! La liste complete des diagnostics de sortie (observables simulees) que l'on peut
61	! avoir avec COSPv2 se trouve au debut du fichier : cosp_read_otputkeys.F90
62
63
64	!!! Modules specifiques a l'interface LMDZ-COSP
65	use lmdz_phys_para
66	use lmdz_grid_phy
67	use ioipsl
68	use iophy
69	use lmdz_xios, ONLY : using_xios
70	use lmdz_cosp_output_mod
71	use lmdz_cosp_output_write_mod
72	use lmdz_cosp_read_outputkeys
73	use lmdz_cosp_subsample_and_optics_mod, only : subsample_and_optics
74	use lmdz_cosp_construct_destroy_mod
75
76	!!! Modules faisant partie du code source de COSPv2
77	use cosp_kinds, only: wp
78	use MOD_COSP_CONFIG, only: N_HYDRO,RTTOV_MAX_CHANNELS, &
79	niv_sorties, vgrid_z_in
80	use mod_quickbeam_optics, only: size_distribution,hydro_class_init, &
81	quickbeam_optics_init
82	use quickbeam, only: radar_cfg
83	use mod_cosp, only: cosp_init,cosp_optical_inputs, &
84	cosp_column_inputs,cosp_outputs, &
85	cosp_simulator
86
87
88	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
89
90	! Declaration des variables
91
92	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
93
94	IMPLICIT NONE
95
96	! Local variables
97	character(len=64),PARAMETER :: cosp_input_nl = 'cospv2_input_nl.txt'
98	character(len=64),PARAMETER :: cosp_output_nl = 'cospv2_output_nl.txt'
99
100	integer, save :: isccp_topheight, isccp_topheight_direction, overlap
101	integer, save :: Ncolumns ! Number of subcolumns in SCOPS
102	integer, save :: Npoints ! Number of gridpoints
103	!$OMP THREADPRIVATE(Npoints)
104	integer, save :: Nlevels ! Number of model vertical levels
105	integer :: Nptslmdz, Nlevlmdz ! Nb de points issus de physiq.F
106	integer, save :: Npoints_it ! Max number of gridpoints to be
107	! processed in one iteration
108	type(cosp_config), save :: cfg ! Variable qui contient les cles
109	! logiques des simulateurs et des
110	! diagnostics, definie dans:
111	! lmdz_cosp_construct_destroy_mod
112	!$OMP THREADPRIVATE(cfg)
113
114	integer :: t0, t1, count_rate, count_max
115	real(wp), save :: cloudsat_radar_freq, cloudsat_k2, rttov_ZenAng, co2, &
116	ch4, n2o, co, emsfc_lw
117	!$OMP THREADPRIVATE(emsfc_lw)
118
119	integer, dimension(RTTOV_MAX_CHANNELS), save :: rttov_Channels
120	real(wp), dimension(RTTOV_MAX_CHANNELS), save :: rttov_Surfem
121	integer, save :: surface_radar, use_mie_tables, &
122	cloudsat_use_gas_abs, cloudsat_do_ray, &
123	melt_lay
124	integer, save :: lidar_ice_type
125	integer, save :: rttov_platform, rttov_satellite, &
126	rttov_Instrument, rttov_Nchannels
127	logical, save :: use_vgrid_in, csat_vgrid_in, &
128	use_precipitation_fluxes
129
130	! Declaration necessaires pour les sorties IOIPSL
131	REAL :: ecrit_day, ecrit_hf, ecrit_mth, missing_val
132	logical :: ok_mensuelCOSP, ok_journeCOSP, ok_hfCOSP, ok_all_xml
133	logical, save :: debut_cosp=.true.
134	!$OMP THREADPRIVATE(debut_cosp)
135
136	logical, save :: first_write=.true.
137	!$OMP THREADPRIVATE(first_write)
138
139	integer, save :: cosp_init_flag = 0
140	!$OMP THREADPRIVATE(cosp_init_flag)
141
142
143	!----------------------------- Input variables from LMDZ-GCM -------------------------------
144	integer :: overlaplmdz ! overlap type: 1=max,
145	! 2=rand, 3=max/rand
146	real, dimension(Nptslmdz,Nlevlmdz) :: phi, p, ph, T, sh, rh, tca, cca, mr_lsliq, &
147	mr_lsice, mr_ccliq, mr_ccice, fl_lsrain, &
148	fl_lssnow, fl_ccrain, fl_ccsnow, fl_lsgrpl, &
149	zlev, zlev_half, mr_ozone, radliq, radice, &
150	dtau_s, dem_s, dtau_c, dem_c, ref_liq, ref_ice
151	real, dimension(Nptslmdz,Nlevlmdz) :: fl_lsrainI, fl_lssnowI, fl_ccrainI, fl_ccsnowI
152	real, dimension(Nptslmdz) :: lon, lat, skt, fracTerLic, u_wind, v_wind, &
153	phis, sunlit
154	real, dimension(Nptslmdz) :: land ! variables intermediaire pour masque TerLic
155	real, dimension(Nlevlmdz) :: presnivs
156	integer :: itap, k, ip
157	REAL :: dtime, freq_cosp
158	real, dimension(2) :: time_bnds
159
160	double precision :: d_dtime
161	double precision, dimension(2) :: d_time_bnds
162
163
164	! ######################################################################################
165	! Declarations specific to COSP2
166	! ######################################################################################
167
168	! Local variables
169	logical :: &
170	Lsingle = .true., & ! True if using MMF_v3_single_moment CLOUDSAT
171	! microphysical scheme (default)
172	Ldouble = .false. ! True if using MMF_v3.5_two_moment CLOUDSAT
173	! microphysical scheme
174	type(size_distribution), save :: sd ! Hydrometeor description
175	!$OMP THREADPRIVATE(sd)
176	type(radar_cfg), save :: rcfg_cloudsat ! Radar configuration
177	!$OMP THREADPRIVATE(rcfg_cloudsat)
178	real, dimension(Nptslmdz,Nlevlmdz,N_HYDRO) :: Reff ! Liquid and Ice particles
179	! effective radius
180	type(cosp_outputs) :: cospOUT ! COSP simulator outputs
181	type(cosp_optical_inputs) :: cospIN ! COSP optical (or derived?)
182	! fields needed by simulators
183	type(cosp_column_inputs) :: cospstateIN ! COSP model fields needed
184	! by simulators
185	character(len=256), dimension(100) :: cosp_status
186	character(len=64), save :: cloudsat_micro_scheme
187
188	! Indices to address arrays of LS and CONV hydrometeors
189	integer,parameter :: &
190	I_LSCLIQ = 1, & ! Large-scale (stratiform) liquid
191	I_LSCICE = 2, & ! Large-scale (stratiform) ice
192	I_LSRAIN = 3, & ! Large-scale (stratiform) rain
193	I_LSSNOW = 4, & ! Large-scale (stratiform) snow
194	I_CVCLIQ = 5, & ! Convective liquid
195	I_CVCICE = 6, & ! Convective ice
196	I_CVRAIN = 7, & ! Convective rain
197	I_CVSNOW = 8, & ! Convective snow
198	I_LSGRPL = 9 ! Large-scale (stratiform) groupel
199
200	! Parametres qui sont lus a partir du fichier "cosp_input_nl.txt"
201	namelist/COSP_INPUT/overlap, isccp_topheight, isccp_topheight_direction, &
202	npoints_it, ncolumns, use_vgrid_in, csat_vgrid_in, &
203	cloudsat_radar_freq, surface_radar, use_mie_tables, &
204	cloudsat_use_gas_abs, cloudsat_do_ray, melt_lay, cloudsat_k2, &
205	cloudsat_micro_scheme, lidar_ice_type, use_precipitation_fluxes, &
206	rttov_platform, rttov_satellite, rttov_Instrument, rttov_Nchannels, &
207	rttov_Channels, rttov_Surfem, rttov_ZenAng, co2, ch4, n2o, co
208
209	!------------------------ Fin declaration des variables ------------------------
210
211
212	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
213
214	! 1) Lecture du fichier "cosp_input_nl.txt", parametres d'entree pour COSP
215
216	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
217
218	print*,'Entree lmdz_cosp_interface' !phys_cosp2'
219	if (debut_cosp) then
220	NPoints=Nptslmdz
221	Nlevels=Nlevlmdz
222	! Surface emissivity
223	emsfc_lw = 1.
224
225	! Lecture du namelist input
226	! CALL read_cosp_input
227	IF (is_master) THEN
228	OPEN(10,file=cosp_input_nl,status='old')
229	READ(10,nml=cosp_input)
230	CLOSE(10)
231	ENDIF
232
233
234	!$OMP BARRIER
235	CALL bcast(overlap)
236	CALL bcast(isccp_topheight)
237	CALL bcast(isccp_topheight_direction)
238	CALL bcast(npoints_it)
239	CALL bcast(ncolumns)
240	CALL bcast(use_vgrid_in)
241	CALL bcast(csat_vgrid_in)
242	CALL bcast(cloudsat_radar_freq)
243	CALL bcast(surface_radar)
244	CALL bcast(cloudsat_use_gas_abs)
245	CALL bcast(cloudsat_do_ray)
246	CALL bcast(cloudsat_k2)
247	CALL bcast(lidar_ice_type)
248	CALL bcast(use_precipitation_fluxes)
249	CALL bcast(rttov_platform)
250	CALL bcast(rttov_satellite)
251	CALL bcast(rttov_Instrument)
252	CALL bcast(rttov_Nchannels)
253	CALL bcast(rttov_Channels)
254	CALL bcast(rttov_Surfem)
255	CALL bcast(rttov_ZenAng)
256	CALL bcast(co2)
257	CALL bcast(ch4)
258	CALL bcast(n2o)
259	CALL bcast(co)
260	CALL bcast(cloudsat_micro_scheme)
261
262	print*,'ok read cosp_input_nl'
263
264	! Clefs Outputs initialisation
265	IF (using_xios) THEN
266	call cosp_outputkeys_init(cfg)
267	ELSE
268	call read_cosp_output_nl(itap,cosp_output_nl,cfg)
269	ENDIF
270
271	print*,' Cles des differents simulateurs cosp a itap :',itap
272	print*,'cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
273	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov', &
274	cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
275	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov
276
277	if (overlaplmdz.ne.overlap) then
278	print*,'Attention overlaplmdz different de overlap lu dans namelist '
279	endif
280
281	IF (using_xios) THEN
282	print*,'On passe par using_xios'
283	ELSE
284	if (cosp_init_flag .eq. 0) then
285
286	! Initialize the distributional parameters for hydrometeors in radar simulator.
287	! In COSPv1.4, this was declared in cosp_defs.f.
288	if (cloudsat_micro_scheme == 'MMF_v3.5_two_moment') then
289	ldouble = .true.
290	lsingle = .false.
291	endif
292	call hydro_class_init(lsingle,ldouble,sd)
293	call quickbeam_optics_init()
294
295	print*,' just before call COSP_INIT, cosp_init_flag =', cosp_init_flag
296	call COSP_INIT(cfg%Lisccp, cfg%Lmodis, cfg%Lmisr, cfg%Lcloudsat, cfg%Lcalipso, &
297	cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, cfg%Lrttov, &
298	cloudsat_radar_freq, cloudsat_k2, cloudsat_use_gas_abs, &
299	cloudsat_do_ray, isccp_topheight, isccp_topheight_direction, &
300	surface_radar, rcfg_cloudsat, use_vgrid_in, csat_vgrid_in, &
301	niv_sorties, Nlevels, cloudsat_micro_scheme)
302	cosp_init_flag = 1
303	print*,' just after call COSP_INIT, cosp_init_flag =', cosp_init_flag
304	endif
305	ENDIF
306
307	print*,'Fin lecture Namelists, debut_cosp =',debut_cosp
308
309	endif ! debut_cosp
310
311
312	!!! Ici on modifie les cles logiques pour les outputs selon les champs actives dans les .xml
313	if ((itap.ge.1).and.(first_write))then
314	IF (using_xios) call read_xiosfieldactive(cfg)
315	first_write=.false.
316
317	if (cosp_init_flag .eq. 0) then
318
319	! Initialize the distributional parameters for hydrometeors in radar simulator.
320	! In COSPv1.4, this was declared in cosp_defs.f.
321	if (cloudsat_micro_scheme == 'MMF_v3.5_two_moment') then
322	ldouble = .true.
323	lsingle = .false.
324	endif
325	call hydro_class_init(lsingle,ldouble,sd)
326	call quickbeam_optics_init()
327
328	print*,' just before call COSP_INIT, cosp_init_flag =', cosp_init_flag
329	call COSP_INIT(cfg%Lisccp, cfg%Lmodis, cfg%Lmisr, cfg%Lcloudsat, cfg%Lcalipso, &
330	cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, cfg%Lrttov, &
331	cloudsat_radar_freq, cloudsat_k2, cloudsat_use_gas_abs, &
332	cloudsat_do_ray, isccp_topheight, isccp_topheight_direction, &
333	surface_radar, rcfg_cloudsat, use_vgrid_in, csat_vgrid_in, &
334	niv_sorties, Nlevels, cloudsat_micro_scheme)
335	cosp_init_flag = 1
336	print*,' just after call COSP_INIT, cosp_init_flag =', cosp_init_flag
337	endif ! cosp_init_flag
338
339
340	print*,' Cles des differents simulateurs cosp a itap :',itap
341	print*,'cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
342	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov', &
343	cfg%Lcloudsat, cfg%Lcalipso, cfg%LgrLidar532, cfg%Latlid, cfg%Lparasol, &
344	cfg%Lisccp, cfg%Lmisr, cfg%Lmodis, cfg%Lrttov
345
346	endif !(itap.gt.1).and.(first_write)
347
348	time_bnds(1) = dtime-dtime/2.
349	time_bnds(2) = dtime+dtime/2.
350
351	d_time_bnds=time_bnds
352	d_dtime=dtime
353
354	!------------------------- Fin initialisation de COSP --------------------------
355
356
357	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
358
359	! 3) Calculs des champs d'entree COSP a partir des variables LMDZ
360
361	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
362
363	! 0) Create ptop/ztop for gbx%pf and gbx%zlev are for the the interface,
364	! also reverse CAM height/pressure values for input into CSOP
365	! CAM state%pint from top to surface, COSP wants surface to top.
366
367	! 0) Altitudes du modele calculees a partir de la variable geopotentiel phi et phis
368	zlev = phi/9.81
369
370	zlev_half(:,1) = phis(:)/9.81
371	DO k = 2, Nlevels
372	DO ip = 1, Npoints
373	zlev_half(ip,k) = phi(ip,k)/9.81 + &
374	(phi(ip,k)-phi(ip,k-1))/9.81 * (ph(ip,k)-p(ip,k)) / (p(ip,k)-p(ip,k-1))
375	enddo
376	enddo
377
378	! 1) Quantite de nuages (couverture?), convectif (=0) et total
379	cca = 0._wp ! convective_cloud_amount (1)
380	tca = tca ! total_cloud_amount (1)
381
382	! 2) Humidite relative est donnee tel quel (variable rh)
383
384	! 3) Masque terre/mer a partir de la variable fracTerLic
385	DO ip = 1, Npoints
386	if (fracTerLic(ip).ge.0.5) then
387	land(ip) = 1.
388	else
389	land(ip) = 0.
390	endif
391	enddo
392
393
394	! A voir l equivalent LMDZ
395	mr_ccliq = 0.0
396	mr_ccice = 0.0
397	!!! gbx%mr_hydro(:,:,I_LSCLIQ) = mr_lsliq !mixing_ratio_large_scale_cloud_liquid (kg/kg)
398	!!! gbx%mr_hydro(:,:,I_LSCICE) = mr_lsice !mixing_ratio_large_scale_cloud_ic
399	!!! gbx%mr_hydro(:,:,I_CVCLIQ) = mr_ccliq !mixing_ratio_convective_cloud_liquid
400	!!! gbx%mr_hydro(:,:,I_CVCICE) = mr_ccice !mixing_ratio_convective_cloud_ice
401	! A revoir
402	fl_lsrain = fl_lsrainI + fl_ccrainI
403	fl_lssnow = fl_lssnowI + fl_ccsnowI
404	!!! gbx%rain_ls = fl_lsrain !flux_large_scale_cloud_rain (kg m^-2 s^-1)
405	!!! gbx%snow_ls = fl_lssnow !flux_large_scale_cloud_snow
406	! A voir l equivalent LMDZ
407	fl_lsgrpl = 0.
408	fl_ccsnow = 0.
409	fl_ccrain = 0.
410	!!! gbx%grpl_ls = fl_lsgrpl !flux_large_scale_cloud_graupel
411	!!! gbx%rain_cv = fl_ccrain !flux_convective_cloud_rain
412	!!! gbx%snow_cv = fl_ccsnow !flux_convective_cloud_snow
413
414	! ISCCP simulator
415	dtau_c = 0.
416	dem_c = 0.
417
418	! note: reff_cosp dimensions should be same as cosp (reff_cosp has 9 hydrometeor dimension)
419	Reff(1:Npoints,1:Nlevels,1:N_HYDRO) = 0.
420	Reff(:,:,I_LSCLIQ) = ref_liq*1e-6
421	Reff(:,:,I_LSCICE) = ref_ice*1e-6
422	Reff(:,:,I_CVCLIQ) = ref_liq*1e-6
423	Reff(:,:,I_CVCICE) = ref_ice*1e-6
424
425
426	if (cosp_init_flag .eq. 1) then ! cosp_init_flag = 1
427
428	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
429
430	! 4a) On construit la variable cospOUT qui contient tous les diagnostics de sortie.
431	! Elle sera remplie lors de l'appel du simulateur COSP
432
433	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
434
435	call construct_cosp_outputs(cfg,Npoints,Ncolumns,Nlevels,niv_sorties,0,cospOUT)
436
437
438	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
439
440	! 4b) On construit la variable cospstateIN que l'on va remplir avec les champs LMDZ
441	! Les champ verticaux doivent etre donnes a l'envers, c-a-d : (Nlevels:1) = (TOA:SFC)
442
443	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
444
445	call construct_cospstateIN(Npoints,Nlevels,0,cospstateIN)
446
447	cospstateIN%lat = lat(1:Npoints)
448	cospstateIN%lon = lon(1:Npoints)
449	cospstateIN%at = t(1:Npoints,Nlevels:1:-1)
450	cospstateIN%qv = sh(1:Npoints,Nlevels:1:-1)
451	cospstateIN%o3 = mr_ozone(1:Npoints,Nlevels:1:-1)
452	cospstateIN%sunlit = sunlit(1:Npoints)
453	cospstateIN%skt = skt(1:Npoints)
454	cospstateIN%land = land(1:Npoints)
455	cospstateIN%surfelev = zlev_half(1:Npoints,1)
456	cospstateIN%pfull = p(1:Npoints,Nlevels:1:-1)
457	cospstateIN%phalf(1:Npoints,1) = 0._wp
458	cospstateIN%phalf(1:Npoints,2:Nlevels+1) = ph(1:Npoints,Nlevels:1:-1)
459	cospstateIN%hgt_matrix = zlev(1:Npoints,Nlevels:1:-1)
460	cospstateIN%hgt_matrix_half(1:Npoints,Nlevels+1) = 0._wp
461	cospstateIN%hgt_matrix_half(1:Npoints,1:Nlevels) = zlev_half(1:Npoints,Nlevels:1:-1)
462
463
464	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
465
466	! 4c) On construit la variable cospIN qui contient les proprietes optiques subcolumn
467	! pour COSP. Elle sera essentiellement remplie dans la subroutine subsample_and_optics
468	! ou sont appeles SCOPS, PREC_SCOPS et les subroutines qui calculent les signaux
469	! simules pour chaque simulateur actif.
470
471	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
472
473	call construct_cospIN(cfg,Npoints,Ncolumns,Nlevels,cospIN)
474	cospIN%emsfc_lw = emsfc_lw
475	if (cfg%Lcloudsat) cospIN%rcfg_cloudsat = rcfg_cloudsat
476
477
478	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
479
480	! 5) Appel de subsample_and_optics : Les champs verticaux doivent etre donnes a
481	! l'envers comme pour le remplissage de cospstateIN, c-a-d : (Nlevels:1) = (TOA:SFC)
482
483	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
484
485	call subsample_and_optics(cfg, Npoints, Nlevels, Ncolumns, N_HYDRO,overlap, &
486	use_precipitation_fluxes, lidar_ice_type, sd, &
487	tca(1:Npoints,Nlevels:1:-1), cca(1:Npoints,Nlevels:1:-1), &
488	fl_lsrain(1:Npoints,Nlevels:1:-1), &
489	fl_lssnow(1:Npoints,Nlevels:1:-1), &
490	fl_lsgrpl(1:Npoints,Nlevels:1:-1), &
491	fl_ccrain(1:Npoints,Nlevels:1:-1), &
492	fl_ccsnow(1:Npoints,Nlevels:1:-1), &
493	mr_lsliq(1:Npoints,Nlevels:1:-1), &
494	mr_lsice(1:Npoints,Nlevels:1:-1), &
495	mr_ccliq(1:Npoints,Nlevels:1:-1), &
496	mr_ccice(1:Npoints,Nlevels:1:-1), &
497	Reff(1:Npoints,Nlevels:1:-1,:), &
498	dtau_c(1:Npoints,Nlevels:1:-1), &
499	dtau_s(1:Npoints,Nlevels:1:-1), &
500	dem_c(1:Npoints,Nlevels:1:-1), &
501	dem_s(1:Npoints,Nlevels:1:-1), cospstateIN, cospIN)
502
503
504	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
505
506	! 6) On appelle le simulateur COSPv2
507
508	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
509
510	print*,'call simulateur'
511
512	cosp_status = COSP_SIMULATOR(cospIN, cospstateIN, cospOUT, 1, Npoints, debug=.false.)
513
514	endif ! cosp_init_flag = 1
515
516
517	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
518
519	! 7a) Ecriture des sorties 1: on cree d'abord les fichiers NCDF pour ecrire les sorties
520	! en appelant lmdz_cosp_output_open (lors du premier appel de cette interface pour les
521	! 2 options d'ecriture), ou sont definis les axes et les caracteristiques
522	! des fichiers de sortie avec les diagnostics.
523
524	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
525
526	if (debut_cosp) then
527	!$OMP MASTER
528
529	print *, ' Open outpts files and define axis'
530	call lmdz_cosp_output_open(Nlevlmdz, Ncolumns, presnivs, dtime, freq_cosp, &
531	ok_mensuelCOSP, ok_journeCOSP, ok_hfCOSP, ok_all_xml, &
532	ecrit_mth, ecrit_day, ecrit_hf, use_vgrid_in, &
533	niv_sorties, vgrid_z_in, zlev(1,:))
534
535	!$OMP END MASTER
536	!$OMP BARRIER
537	debut_cosp=.false.
538	endif ! debut_cosp
539
540	if (cosp_init_flag .eq. 1) then
541
542	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
543
544	! 7b) Ecriture des sorties 2: le remplissage des fichiers de sortie se fait a chaque
545	! appel de cette interface avec une difference entre les 2 options d'ecriture:
546
547	! AVEC xios, on commence a remplir les fichiers de sortie a partir du DEUXIEME
548	! appel de cette interface (lorsque cosp_init_flag = 1).
549
550	! SANS xios, on commence a remplir les fichiers de sortie a partir du PREMIER
551	! appel de cette interface (lorsque cosp_init_flag = 1).
552
553	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
554
555	print *, 'Calling write output'
556	call lmdz_cosp_output_write(Nlevlmdz, Npoints, Ncolumns, itap, dtime, freq_COSP, &
557	missing_val, cfg, niv_sorties, cospOUT)
558
559	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
560
561	! 8) On libere la memoire allouee lors de cet appel a l'interface
562
563	!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
564
565	call destroy_cospIN(cospIN)
566	call destroy_cospstateIN(cospstateIN)
567	call destroy_cosp_outputs(cospOUT)
568
569	endif ! cosp_init_flag = 1
570
571	end subroutine lmdz_cosp_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format