source: LMDZ6/branches/Amaury_dev/libf/phylmd/change_srf_frac_mod.F90 @ 5157

! $Id: change_srf_frac_mod.F90 5144 2024-07-29 21:01:04Z abarral $

MODULE change_srf_frac_mod

  IMPLICIT NONE

CONTAINS

  ! Change Surface Fractions
  ! Author J Ghattas 2008

  SUBROUTINE change_srf_frac(itime, dtime, jour, &
          pctsrf, evap, z0m, z0h, agesno, &
          alb_dir, alb_dif, tsurf, ustar, u10m, v10m, pbl_tke)

    ! This SUBROUTINE is called from physiq.F at each timestep.
    ! 1- For each type of ocean (force, slab, couple) receive new fractions only if
    !    it's time to modify (is_modified=true). Otherwise nothing is done (is_modified=false).
    ! If received new fraction :
    ! 2- Tests and ajustements are done on the fractions
    ! 3- Initialize variables where a new fraction(new or melted ice) has appered,

    USE dimphy
    USE surface_data, ONLY: type_ocean, version_ocean
    USE limit_read_mod
    USE pbl_surface_mod, ONLY: pbl_surface_newfrac
    USE cpl_mod, ONLY: cpl_receive_frac
    USE ocean_slab_mod, ONLY: fsic, ocean_slab_frac
    USE indice_sol_mod
    USE lmdz_print_control, ONLY: lunout
    USE lmdz_abort_physic, ONLY: abort_physic
    USE lmdz_clesphys ! albedo SB
    USE lmdz_yomcst

    ! Input arguments
    !****************************************************************************************
    INTEGER, INTENT(IN) :: itime   ! current time step
    INTEGER, INTENT(IN) :: jour    ! day of the year
    REAL, INTENT(IN) :: dtime   ! length of time step (s)

    ! In-Output arguments
    !****************************************************************************************

    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: pctsrf ! sub-surface fraction
    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: evap, agesno ! sub-surface fraction
    REAL, DIMENSION(klon, nbsrf + 1), INTENT(INOUT) :: z0m, z0h ! sub-surface fraction
    !albedo SB >>>
    REAL, DIMENSION(klon, nsw, nbsrf), INTENT(INOUT) :: alb_dir, alb_dif
    !albedo SB <<<

    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: tsurf
    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: ustar
    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: u10m
    REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: v10m
    !jyg<
    !!    REAL, DIMENSION(klon,klev+1,nbsrf), INTENT(INOUT) :: pbl_tke
    REAL, DIMENSION(klon, klev + 1, nbsrf + 1), INTENT(INOUT) :: pbl_tke
    !>jyg

    ! Loccal variables
    !****************************************************************************************
    INTEGER :: i, nsrf
    LOGICAL :: is_modified   ! true if pctsrf is modified at this time step
    LOGICAL :: test_sum = .FALSE.
    LOGICAL, DIMENSION(klon, nbsrf) :: new_surf
    REAL, DIMENSION(klon, nbsrf) :: pctsrf_old    ! fraction from previous time-step
    REAL :: tmpsum

    pctsrf_old(:, :) = pctsrf(:, :)
    !****************************************************************************************
    ! 1)
    ! For each type of ocean (force, slab, couple) receive new fractions only if it's time
    ! to modify (is_modified=true). Otherwise nothing is done (is_modified=false).
    !****************************************************************************************
    SELECT CASE (type_ocean)
    CASE ('force')
      ! Read fraction from limit.nc
      CALL limit_read_frac(itime, dtime, jour, pctsrf, is_modified)
    CASE ('slab')
      IF (version_ocean == 'sicOBS'.OR. version_ocean == 'sicNO') THEN
        ! Read fraction from limit.nc
        CALL limit_read_frac(itime, dtime, jour, pctsrf, is_modified)
      ELSE
        ! Get fraction from slab module
        CALL ocean_slab_frac(itime, dtime, jour, pctsrf, is_modified)
      ENDIF
    CASE ('couple')
      ! Get fraction from the coupler
      CALL cpl_receive_frac(itime, dtime, pctsrf, is_modified)
    END SELECT


    !****************************************************************************************
    ! 2)
    ! Tests and ajustements on the new fractions :
    ! - Put to zero fractions that are too small
    ! - Test total fraction sum is one for each grid point

    !****************************************************************************************
    IF (is_modified) THEN

      ! Test and exit if a fraction is negative
      IF (MINVAL(pctsrf(:, :)) < 0.) THEN
        WRITE(lunout, *)'Warning! One or several fractions are negative, itime=', itime
        WRITE(lunout, *)'at point = ', MINLOC(pctsrf(:, :))
        WRITE(lunout, *)'value = ', MINVAL(pctsrf(:, :))
        CALL abort_physic('change_srf_frac', 'Negative fraction', 1)
      END IF

      ! Optional test on the incoming fraction
      IF (test_sum) THEN
        DO i = 1, klon
          tmpsum = SUM(pctsrf(i, :))
          IF (ABS(1. - tmpsum) > 0.05) CALL abort_physic('change_srf_frac', 'Total fraction not equal 1.', 1)
        END DO
      END IF

      ! Test for too small fractions of the sum land+landice and ocean+sea-ice
      WHERE ((pctsrf(:, is_ter) + pctsrf(:, is_lic)) < 2 * EPSFRA)
        pctsrf(:, is_ter) = 0.
        pctsrf(:, is_lic) = 0.
      END WHERE

      WHERE ((pctsrf(:, is_oce) + pctsrf(:, is_sic)) < 2 * EPSFRA)
        pctsrf(:, is_oce) = 0.
        pctsrf(:, is_sic) = 0.
      END WHERE

      ! Normalize to force total fraction to be equal one
      DO i = 1, klon
        tmpsum = SUM(pctsrf(i, :))
        DO nsrf = 1, nbsrf
          pctsrf(i, nsrf) = pctsrf(i, nsrf) / tmpsum
        END DO
      END DO

      ! Test for too small fractions at each sub-surface
      WHERE (pctsrf(:, is_ter) < EPSFRA)
        pctsrf(:, is_lic) = pctsrf(:, is_ter) + pctsrf(:, is_lic)
        pctsrf(:, is_ter) = 0.
      END WHERE

      WHERE (pctsrf(:, is_lic) < EPSFRA)
        pctsrf(:, is_ter) = pctsrf(:, is_ter) + pctsrf(:, is_lic)
        pctsrf(:, is_lic) = 0.
      END WHERE

      WHERE (pctsrf(:, is_oce) < EPSFRA)
        pctsrf(:, is_sic) = pctsrf(:, is_oce) + pctsrf(:, is_sic)
        pctsrf(:, is_oce) = 0.
      END WHERE

      WHERE (pctsrf(:, is_sic) < EPSFRA)
        pctsrf(:, is_oce) = pctsrf(:, is_oce) + pctsrf(:, is_sic)
        pctsrf(:, is_sic) = 0.
      END WHERE
      ! Send fractions back to slab ocean if needed
      IF (type_ocean == 'slab'.AND. version_ocean/='sicINT') THEN
        WHERE (1. - zmasq(:)>EPSFRA)
          fsic(:) = pctsrf(:, is_sic) / (1. - zmasq(:))
        END WHERE
      END IF

      !****************************************************************************************
      ! 3)
      ! Initialize variables where a new fraction has appered,
      ! i.e. where new sea ice has been formed
      ! or where ice free ocean has appread in a grid cell

      !****************************************************************************************

      CALL pbl_surface_newfrac(itime, pctsrf, pctsrf_old, &
              evap, z0m, z0h, agesno, &
              tsurf, alb_dir, alb_dif, ustar, u10m, v10m, pbl_tke)

    ELSE
      ! No modifcation should be done
      pctsrf(:, :) = pctsrf_old(:, :)

    END IF ! is_modified

  END SUBROUTINE change_srf_frac


END MODULE change_srf_frac_mod