source: LMDZ6/branches/Amaury_dev/libf/misc/lmdz_wxios.F90 @ 5153

! $Id$

MODULE lmdz_wxios
  USE lmdz_xios

  !Variables disponibles pendant toute l'execution du programme:

  INTEGER, SAVE :: g_comm
  CHARACTER(len = 100), SAVE :: g_ctx_name = "LMDZ"
  TYPE(xios_context), SAVE :: g_ctx
  !$OMP THREADPRIVATE(g_comm,g_ctx_name,g_ctx)
  LOGICAL, SAVE :: g_flag_xml = .FALSE.
  CHARACTER(len = 100) :: g_field_name = "nofield"
  !$OMP THREADPRIVATE(g_flag_xml,g_field_name)
  REAL :: missing_val_omp
  REAL :: missing_val
  !$OMP THREADPRIVATE(missing_val)

#ifdef XIOS1
#error "XIOS v1 no longer supported, use XIOS v2."
#endif

CONTAINS

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  !   36day => 36d etc     !!!!!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  SUBROUTINE reformadate(odate, ndate)
    CHARACTER(len = *), INTENT(IN) :: odate
    TYPE(xios_duration) :: ndate

    INTEGER :: i = 0
    !!!!!!!!!!!!!!!!!!
    ! Pour XIOS:
    !  year : y
    !  month : mo
    !  day : d
    !  hour : h
    !  minute : mi
    !  second : s
    !!!!!!!!!!!!!!!!!!

    i = INDEX(odate, "day")
    IF (i > 0) THEN
      read(odate(1:i - 1), *) ndate%day
    END IF

    i = INDEX(odate, "hr")
    IF (i > 0) THEN
      read(odate(1:i - 1), *) ndate%hour
    END IF

    i = INDEX(odate, "mth")
    IF (i > 0) THEN
      read(odate(1:i - 1), *) ndate%month
    END IF

    !IF (prt_level >= 10) WRITE(lunout,*) "Xios. ", odate, " => ", ndate
  END SUBROUTINE reformadate

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  !   ave(X) => average etc     !!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  CHARACTER(len = 7) FUNCTION reformaop(op)
    CHARACTER(len = *), INTENT(IN) :: op

    INTEGER :: i = 0
    reformaop = "average"

    IF (op=="inst(X)") THEN
      reformaop = "instant"
    END IF

    IF (op=="once") THEN
      reformaop = "once"
    END IF

    IF (op=="t_max(X)") THEN
      reformaop = "maximum"
    END IF

    IF (op=="t_min(X)") THEN
      reformaop = "minimum"
    END IF

    !IF (prt_level >= 10) WRITE(lunout,*) "Xios. ", op, " => ", reformaop
  END FUNCTION reformaop

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Routine d'initialisation      !!!!!!!!!!!!!
  !     A lancer juste après mpi_init !!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  SUBROUTINE wxios_init(xios_ctx_name, locom, outcom, type_ocean)
    USE lmdz_print_control, ONLY: prt_level, lunout
    IMPLICIT NONE

    CHARACTER(len = *), INTENT(IN) :: xios_ctx_name
    INTEGER, INTENT(IN), OPTIONAL :: locom
    INTEGER, INTENT(OUT), OPTIONAL :: outcom
    CHARACTER(len = 6), INTENT(IN), OPTIONAL :: type_ocean

    TYPE(xios_context) :: xios_ctx
    INTEGER :: xios_comm

    IF (prt_level >= 10) WRITE(lunout, *) "wxios_init: Initialization"

    IF (PRESENT(locom)) THEN
      CALL xios_initialize(xios_ctx_name, local_comm = locom, return_comm = xios_comm)
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_init: ctx=", xios_ctx_name, " local_comm=", locom, ", return_comm=", xios_comm
    ELSE
      CALL xios_initialize(xios_ctx_name, return_comm = xios_comm)
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_init: ctx=", xios_ctx_name, " return_comm=", xios_comm
    END IF

    IF (PRESENT(outcom)) THEN
      outcom = xios_comm
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_init: ctx=", xios_ctx_name, " outcom=", outcom
    END IF

    !Enregistrement des variables globales:
    g_comm = xios_comm
    g_ctx_name = xios_ctx_name

    !        ! Si couple alors init fait dans cpl_init
    !        IF (.NOT. PRESENT(type_ocean)) THEN
    !            CALL wxios_context_init()
    !        ENDIF
    WRITE(*, *)'END of WXIOS_INIT', g_comm, g_ctx_name

  END SUBROUTINE wxios_init

  SUBROUTINE wxios_context_init()
    USE lmdz_print_control, ONLY: prt_level, lunout
    USE lmdz_phys_mpi_data, ONLY: COMM_LMDZ_PHY
    IMPLICIT NONE

    TYPE(xios_context) :: xios_ctx

    !$OMP MASTER
    !Initialisation du contexte:
    !!CALL xios_context_initialize(g_ctx_name, g_comm)
    CALL xios_context_initialize(g_ctx_name, COMM_LMDZ_PHY)
    CALL xios_get_handle(g_ctx_name, xios_ctx)    !Récupération
    CALL xios_set_current_context(xios_ctx)            !Activation
    g_ctx = xios_ctx

    CALL wxios_add_group_init

    IF (prt_level >= 10) THEN
      WRITE(lunout, *) "wxios_context_init: Current context is ", trim(g_ctx_name)
      WRITE(lunout, *) "     now CALL xios_solve_inheritance()"
    ENDIF
    !Une première analyse des héritages:
    CALL xios_solve_inheritance()
    !$OMP END MASTER
  END SUBROUTINE wxios_context_init


  SUBROUTINE wxios_add_group_init

    ! routine create by Anne Cozic (2023)
    ! This routine will create field associated to group defined without description of fields in field.xml file
    ! This routine need to be CALL before "xios_sole_inheritance" after an !$OMP MASTER directive

    USE infotrac_phy, ONLY: nbtr, nqtot, nqo, type_trac, tracers, niso, ntiso
    USE lmdz_strings, ONLY: maxlen

    IMPLICIT NONE

    TYPE(xios_fieldgroup) :: group_handle, philev_hdl
    TYPE(xios_field) :: child
    INTEGER :: k, iq
    CHARACTER(len = 12) :: nvar, name_phi
    CHARACTER(LEN = maxlen) :: varname, dn
    CHARACTER(LEN = maxlen) :: unt


    ! group create for StratAER variables
    !On ajoute les variables 3D traceurs par l interface fortran
    CALL xios_get_handle("fields_strataer_trac_3D", group_handle)
    ! On boucle sur les traceurs pour les ajouter au groupe puis fixer les attributs
    DO iq = 1, nqtot
      IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE
      dn = 'd' // TRIM(tracers(iq)%name) // '_'

      unt = "kg kg-1"
      varname = trim(tracers(iq)%name)
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)

      unt = "kg kg-1 s-1"
      varname = TRIM(dn) // 'vdf'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'the'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'con'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'lessi_impa'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'lessi_nucl'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'insc'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'bcscav'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'evapls'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'ls'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'trsp'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'sscav'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'sat'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
      varname = TRIM(dn) // 'uscav'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
    END DO
    !On ajoute les variables 2D traceurs par l interface fortran
    CALL xios_get_handle("fields_strataer_trac_2D", group_handle)
    ! On boucle sur les traceurs pour les ajouter au groupe puis fixer les attributs
    DO iq = 1, nqtot
      IF(.NOT.(tracers(iq)%isAdvected .AND. tracers(iq)%isInPhysics)) CYCLE

      unt = "kg m-2"
      varname = 'cum' // trim(tracers(iq)%name)

      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)

      unt = "kg m-2 s-1"
      varname = 'cumd' // trim(tracers(iq)%name) // '_dry'
      CALL xios_add_child(group_handle, child, varname)
      CALL xios_set_attr(child, name = varname, unit = unt)
    ENDDO


    ! group create for offline mass flow variables
    CALL xios_get_handle("philev_grp", philev_hdl)

    DO k = 1, 79
      IF (k<10) THEN
        WRITE(nvar, '(i1)') k
      ELSE IF (k<100) THEN
        WRITE(nvar, '(i2)') k
      ELSE
        WRITE(nvar, '(i3)') k
      END IF
      name_phi = "phi_lev" // TRIM(nvar)
      CALL xios_add_child(philev_hdl, child, "phi_lev" // TRIM(nvar))
      CALL xios_set_attr(child, name = trim(name_phi))
    ENDDO

  END SUBROUTINE wxios_add_group_init

  SUBROUTINE wxios_set_context()
    IMPLICIT NONE
    TYPE(xios_context) :: xios_ctx

    !$OMP MASTER
    CALL xios_get_handle(g_ctx_name, xios_ctx)    !Récupération
    CALL xios_set_current_context(xios_ctx)            !Activation
    !$OMP END MASTER

  END SUBROUTINE wxios_set_context

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Routine de paramétrisation !!!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  SUBROUTINE wxios_set_cal(pasdetemps, calendrier, annee, mois, jour, heure, ini_an, ini_mois, ini_jour, ini_heure)
    USE lmdz_print_control, ONLY: prt_level, lunout
    USE lmdz_abort_physic, ONLY: abort_physic
    IMPLICIT NONE

    !Paramètres:
    CHARACTER(len = *), INTENT(IN) :: calendrier
    INTEGER, INTENT(IN) :: annee, mois, jour, ini_an, ini_mois, ini_jour
    REAL, INTENT(IN) :: pasdetemps, heure, ini_heure

    !Variables:
    CHARACTER(len = 80) :: abort_message
    CHARACTER(len = 19) :: date
    INTEGER :: njour = 1

    !Variables pour xios:
    TYPE(xios_duration) :: mdtime
    !REAL(kind = 8) :: year=0, month=0, day=0, hour=0, minute=0, second=0

    mdtime%second = pasdetemps

    !Réglage du calendrier:
    SELECT CASE (calendrier)
    CASE('earth_360d')
      CALL xios_define_calendar("D360")
      IF (prt_level >= 10) WRITE(lunout, *) 'wxios_set_cal: Calendrier terrestre a 360 jours/an'
    CASE('earth_365d')
      CALL xios_define_calendar("NoLeap")
      IF (prt_level >= 10) WRITE(lunout, *) 'wxios_set_cal: Calendrier terrestre a 365 jours/an'
    CASE('gregorian')
      CALL xios_define_calendar("Gregorian")
      IF (prt_level >= 10) WRITE(lunout, *) 'wxios_set_cal: Calendrier gregorien'
    CASE DEFAULT
      abort_message = 'wxios_set_cal: Mauvais choix de calendrier'
      CALL abort_physic('Gcm:Xios', abort_message, 1)
    END SELECT

    !Formatage de la date d'origine:
    WRITE(date, "(i4.4,'-',i2.2,'-',i2.2,' ',i2.2,':00:00')") annee, mois, jour, int(heure)

    IF (prt_level >= 10) WRITE(lunout, *) "wxios_set_cal: Time origin: ", date
    CALL xios_set_time_origin(xios_date(annee, mois, jour, int(heure), 0, 0))

    !Formatage de la date de debut:

    WRITE(date, "(i4.4,'-',i2.2,'-',i2.2,' ',i2.2,':00:00')") ini_an, ini_mois, ini_jour, int(ini_heure)

    IF (prt_level >= 10) WRITE(lunout, *) "wxios_set_cal: Start date: ", date

    CALL xios_set_start_date(xios_date(ini_an, ini_mois, ini_jour, int(ini_heure), 0, 0))

    !Et enfin,le pas de temps:
    CALL xios_set_timestep(mdtime)
    IF (prt_level >= 10) WRITE(lunout, *) "wxios_set_cal: ts=", mdtime
  END SUBROUTINE wxios_set_cal

  SUBROUTINE wxios_set_timestep(ts)
    REAL, INTENT(IN) :: ts
    TYPE(xios_duration) :: mdtime

    mdtime%timestep = ts

    CALL xios_set_timestep(mdtime)
  END SUBROUTINE wxios_set_timestep

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Pour initialiser un domaine !!!!!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  SUBROUTINE wxios_domain_param(dom_id)
    USE dimphy, ONLY: klon
    USE lmdz_phys_transfert_para, ONLY: gather, bcast
    USE lmdz_phys_para, ONLY: jj_nb, jj_begin, jj_end, ii_begin, ii_end, &
            mpi_size, mpi_rank, klon_mpi, &
            is_sequential, is_south_pole_dyn
    USE lmdz_grid_phy, ONLY: nbp_lon, nbp_lat, klon_glo
    USE lmdz_print_control, ONLY: prt_level, lunout
    USE lmdz_geometry

    IMPLICIT NONE
    CHARACTER(len = *), INTENT(IN) :: dom_id ! domain identifier

    REAL :: rlat_glo(klon_glo)
    REAL :: rlon_glo(klon_glo)
    REAL :: io_lat(nbp_lat)
    REAL :: io_lon(nbp_lon)
    LOGICAL :: mask(nbp_lon, jj_nb) !Masque pour les problèmes de recouvrement MPI
    TYPE(xios_domain) :: dom
    INTEGER :: i
    LOGICAL :: boool

    CALL gather(latitude_deg, rlat_glo)
    CALL bcast(rlat_glo)
    CALL gather(longitude_deg, rlon_glo)
    CALL bcast(rlon_glo)

    !$OMP MASTER
    io_lat(1) = rlat_glo(1)
    io_lat(nbp_lat) = rlat_glo(klon_glo)
    IF ((nbp_lon * nbp_lat) > 1) THEN
      DO i = 2, nbp_lat - 1
        io_lat(i) = rlat_glo(2 + (i - 2) * nbp_lon)
      ENDDO
    ENDIF

    IF (klon_glo == 1) THEN
      io_lon(1) = rlon_glo(1)
    ELSE
      io_lon(1:nbp_lon) = rlon_glo(2:nbp_lon + 1)
    ENDIF


    !On récupère le handle:
    CALL xios_get_handle(dom_id, dom)

    !On parametrise le domaine:
    CALL xios_set_attr(dom, ni_glo = nbp_lon, ibegin = 0, ni = nbp_lon, type = "rectilinear")
    CALL xios_set_attr(dom, nj_glo = nbp_lat, jbegin = jj_begin - 1, nj = jj_nb, data_dim = 2)
    CALL xios_set_attr(dom, lonvalue_1d = io_lon(1:nbp_lon), latvalue_1d = io_lat(jj_begin:jj_end))
    CALL xios_set_domain_attr("dom_out", domain_ref = dom_id)

    !On definit un axe de latitudes pour les moyennes zonales
    IF (xios_is_valid_axis("axis_lat")) THEN
      CALL xios_set_axis_attr("axis_lat", n_glo = nbp_lat, n = jj_nb, begin = jj_begin - 1, value = io_lat(jj_begin:jj_end))
    ENDIF
    IF (xios_is_valid_axis("axis_lat_greordered")) THEN
      CALL xios_set_axis_attr("axis_lat_greordered", n_glo = nbp_lat, n = jj_nb, begin = jj_begin - 1, &
              value = io_lat(jj_begin:jj_end) * (-1.))
    ENDIF

    IF (.NOT.is_sequential) THEN
      mask(:, :) = .TRUE.
      IF (ii_begin>1) mask(1:ii_begin - 1, 1) = .FALSE.
      IF (ii_end<nbp_lon) mask(ii_end + 1:nbp_lon, jj_nb) = .FALSE.
      ! special case for south pole
      IF ((ii_end==1).AND.(is_south_pole_dyn)) mask(1:nbp_lon, jj_nb) = .TRUE.
      IF (prt_level >= 10) THEN
        WRITE(lunout, *) "wxios_domain_param: mpirank=", mpi_rank, " mask(:,1)=", mask(:, 1)
        WRITE(lunout, *) "wxios_domain_param: mpirank=", mpi_rank, " mask(:,jj_nb)=", mask(:, jj_nb)
      ENDIF
      CALL xios_set_attr(dom, mask_2d = mask)
    END IF

    CALL xios_is_defined_attr(dom, ni_glo = boool)
    !Vérification:
    IF (xios_is_valid_domain(dom_id)) THEN
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_domain_param: Domain initialized: ", trim(dom_id), boool
    ELSE
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_domain_param: Invalid domain: ", trim(dom_id)
    END IF
    !$OMP END MASTER

  END SUBROUTINE wxios_domain_param


  SUBROUTINE wxios_domain_param_unstructured(dom_id)
    USE lmdz_geometry, ONLY: longitude, latitude, boundslon, boundslat, ind_cell_glo
    USE lmdz_grid_phy, ONLY: nvertex, klon_glo
    USE lmdz_physical_constants, ONLY: PI
    USE lmdz_phys_para
    USE lmdz_ioipsl_getin_p, ONLY: getin_p
    IMPLICIT NONE
    CHARACTER(len = *), INTENT(IN) :: dom_id ! domain identifier
    REAL :: lon_mpi(klon_mpi)
    REAL :: lat_mpi(klon_mpi)
    REAL :: boundslon_mpi(klon_mpi, nvertex)
    REAL :: boundslat_mpi(klon_mpi, nvertex)
    INTEGER :: ind_cell_glo_mpi(klon_mpi)
    TYPE(xios_domain) :: dom

    LOGICAL :: remap_output

    CALL gather_omp(longitude * 180 / PI, lon_mpi)
    CALL gather_omp(latitude * 180 / PI, lat_mpi)
    CALL gather_omp(boundslon * 180 / PI, boundslon_mpi)
    CALL gather_omp(boundslat * 180 / PI, boundslat_mpi)
    CALL gather_omp(ind_cell_glo, ind_cell_glo_mpi)

    remap_output = .TRUE.
    CALL getin_p("remap_output", remap_output)

    !$OMP MASTER
    CALL xios_get_handle(dom_id, dom)

    !On parametrise le domaine:
    CALL xios_set_attr(dom, ni_glo = klon_glo, ibegin = ij_begin - 1, ni = ij_nb, type = "unstructured")
    CALL xios_set_attr(dom, nvertex = nvertex, lonvalue_1d = lon_mpi, latvalue_1d = lat_mpi, &
            bounds_lon_1d = TRANSPOSE(boundslon_mpi), bounds_lat_1d = TRANSPOSE(boundslat_mpi))
    CALL xios_set_attr(dom, i_index = ind_cell_glo_mpi(:) - 1)
    IF (remap_output) THEN
      CALL xios_set_domain_attr("dom_out", domain_ref = "dom_regular")
      CALL xios_set_fieldgroup_attr("remap_expr", expr = "@this_ref")
      CALL xios_set_fieldgroup_attr("remap_1800s", freq_op = xios_duration_convert_from_string("1800s"))
      CALL xios_set_fieldgroup_attr("remap_1h", freq_op = xios_duration_convert_from_string("1h"))
      CALL xios_set_fieldgroup_attr("remap_3h", freq_op = xios_duration_convert_from_string("3h"))
      CALL xios_set_fieldgroup_attr("remap_6h", freq_op = xios_duration_convert_from_string("6h"))
      CALL xios_set_fieldgroup_attr("remap_1d", freq_op = xios_duration_convert_from_string("1d"))
      CALL xios_set_fieldgroup_attr("remap_1mo", freq_op = xios_duration_convert_from_string("1mo"))
    ENDIF
    !$OMP END MASTER

  END SUBROUTINE wxios_domain_param_unstructured


  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Pour déclarer un axe vertical !!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  SUBROUTINE wxios_add_vaxis(axis_id, axis_size, axis_value, &
          positif, bnds)
    USE lmdz_print_control, ONLY: prt_level, lunout
    IMPLICIT NONE

    CHARACTER (len = *), INTENT(IN) :: axis_id
    INTEGER, INTENT(IN) :: axis_size
    REAL, DIMENSION(axis_size), INTENT(IN) :: axis_value
    CHARACTER (len = *), INTENT(IN), OPTIONAL :: positif
    REAL, DIMENSION(axis_size, 2), INTENT(IN), OPTIONAL :: bnds

    !        TYPE(xios_axisgroup) :: axgroup
    !        TYPE(xios_axis) :: ax
    !        CHARACTER(len=50) :: axis_id

    !        IF (len_trim(axisgroup_id).gt.len(axis_id)) THEN
    !          WRITE(lunout,*) "wxios_add_vaxis: error, size of axis_id too small!!"
    !          WRITE(lunout,*) "     increase it to at least ",len_trim(axisgroup_id)
    !          CALL abort_gcm("wxios_add_vaxis","len(axis_id) too small",1)
    !        ENDIF
    !        axis_id=trim(axisgroup_id)

    !On récupère le groupe d'axes qui va bien:
    !CALL xios_get_axisgroup_handle(axisgroup_id, axgroup)

    !On ajoute l'axe correspondant à ce fichier:
    !CALL xios_add_axis(axgroup, ax, TRIM(ADJUSTL(axis_id)))

    !Et on le parametrise:
    !CALL xios_set_axis_attr_hdl(ax, size=axis_size, value=axis_value)

    ! Ehouarn: New way to declare axis, without axis_group:
    IF (PRESENT(positif) .AND. PRESENT(bnds)) THEN
      CALL xios_set_axis_attr(trim(axis_id), n_glo = axis_size, value = axis_value, &
              positive = positif, bounds = bnds)
    ELSE IF (PRESENT(positif)) THEN
      CALL xios_set_axis_attr(trim(axis_id), n_glo = axis_size, value = axis_value, &
              positive = positif)
    ELSE IF (PRESENT(bnds)) THEN
      CALL xios_set_axis_attr(trim(axis_id), n_glo = axis_size, value = axis_value, &
              bounds = bnds)
    else
      CALL xios_set_axis_attr(trim(axis_id), n_glo = axis_size, value = axis_value)
    endif

    !Vérification:
    IF (xios_is_valid_axis(TRIM(ADJUSTL(axis_id)))) THEN
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_vaxis: Axis created: ", TRIM(ADJUSTL(axis_id))
    ELSE
      WRITE(lunout, *) "wxios_add_vaxis: Invalid axis: ", TRIM(ADJUSTL(axis_id))
    END IF

  END SUBROUTINE wxios_add_vaxis


  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Pour déclarer un fichier  !!!!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  SUBROUTINE wxios_add_file(fname, ffreq, flvl)
    USE lmdz_print_control, ONLY: prt_level, lunout
    IMPLICIT NONE

    CHARACTER(len = *), INTENT(IN) :: fname
    CHARACTER(len = *), INTENT(IN) :: ffreq
    INTEGER, INTENT(IN) :: flvl

    TYPE(xios_file) :: x_file
    TYPE(xios_filegroup) :: x_fg
    TYPE(xios_duration) :: nffreq

    !On regarde si le fichier n'est pas défini par XML:
    IF (.NOT.xios_is_valid_file(fname)) THEN
      !On créé le noeud:
      CALL xios_get_handle("defile", x_fg)
      CALL xios_add_child(x_fg, x_file, fname)

      !On reformate la fréquence:
      CALL reformadate(ffreq, nffreq)

      !On configure:
      CALL xios_set_attr(x_file, name = "X" // fname, &
              output_freq = nffreq, output_level = flvl, enabled = .TRUE.)

      IF (xios_is_valid_file("X" // fname)) THEN
        IF (prt_level >= 10) THEN
          WRITE(lunout, *) "wxios_add_file: New file: ", "X" // fname
          WRITE(lunout, *) "wxios_add_file: output_freq=", nffreq, "; output_lvl=", flvl
        ENDIF
      ELSE
        WRITE(lunout, *) "wxios_add_file: Error, invalid file: ", "X" // trim(fname)
        WRITE(lunout, *) "wxios_add_file: output_freq=", nffreq, "; output_lvl=", flvl
      END IF
    ELSE
      IF (prt_level >= 10) THEN
        WRITE(lunout, *) "wxios_add_file: File ", trim(fname), " défined using XML."
      ENDIF
      ! Ehouarn: add an enable=.TRUE. on top of xml definitions... why???
      CALL xios_set_file_attr(fname, enabled = .TRUE.)
    END IF
  END SUBROUTINE wxios_add_file

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Pour créer un champ      !!!!!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  SUBROUTINE wxios_add_field(fieldname, fieldgroup, fieldlongname, fieldunit)
    USE netcdf, ONLY: nf90_fill_real
    USE lmdz_iniprint, ONLY: lunout, prt_level

    IMPLICIT NONE

    CHARACTER(len = *), INTENT(IN) :: fieldname
    TYPE(xios_fieldgroup), INTENT(IN) :: fieldgroup
    CHARACTER(len = *), INTENT(IN) :: fieldlongname
    CHARACTER(len = *), INTENT(IN) :: fieldunit

    TYPE(xios_field) :: field
    CHARACTER(len = 10) :: newunit
    REAL(KIND = 8) :: def

    !La valeur par défaut des champs non définis:
    def = nf90_fill_real

    IF (fieldunit == " ") THEN
      newunit = "-"
    ELSE
      newunit = fieldunit
    ENDIF

    !On ajoute le champ:
    CALL xios_add_child(fieldgroup, field, fieldname)
    !IF (prt_level >= 10) WRITE(lunout,*) "wxios_add_field: ",fieldname,fieldgroup, fieldlongname, fieldunit

    !On rentre ses paramètres:
    CALL xios_set_attr(field, standard_name = fieldlongname, unit = newunit, default_value = def)
    IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_field: Field ", trim(fieldname), "cree:"
    IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_field: long_name=", trim(fieldlongname), "; unit=", trim(newunit), ";  default_value=", nf90_fill_real

  END SUBROUTINE wxios_add_field

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ! Pour déclarer un champ      !!!!!!!!!!!!!!!!!
  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  SUBROUTINE wxios_add_field_to_file(fieldname, fdim, fid, fname, fieldlongname, fieldunit, field_level, op, nam_axvert)
    USE lmdz_print_control, ONLY: prt_level, lunout
    IMPLICIT NONE

    CHARACTER(len = *), INTENT(IN) :: fieldname
    INTEGER, INTENT(IN) :: fdim, fid
    CHARACTER(len = *), INTENT(IN) :: fname
    CHARACTER(len = *), INTENT(IN) :: fieldlongname
    CHARACTER(len = *), INTENT(IN) :: fieldunit
    INTEGER, INTENT(IN) :: field_level
    CHARACTER(len = *), INTENT(IN) :: op

    CHARACTER(len = 20) :: axis_id ! Ehouarn: dangerous...
    CHARACTER(len = 20), INTENT(IN), OPTIONAL :: nam_axvert
    CHARACTER(len = 100) :: operation
    TYPE(xios_file) :: f
    TYPE(xios_field) :: field
    TYPE(xios_fieldgroup) :: fieldgroup
    TYPE(xios_duration) :: freq_op

    LOGICAL :: bool = .FALSE.
    INTEGER :: lvl = 0


    ! Ajout Abd pour NMC:
    IF (fid<=6) THEN
      axis_id = "presnivs"
    ELSE
      axis_id = "plev"
    ENDIF

    IF (PRESENT(nam_axvert)) THEN
      axis_id = nam_axvert
      PRINT*, 'nam_axvert=', axis_id
    ENDIF

    !on prépare le nom de l'opération:
    operation = reformaop(op)


    !On selectionne le bon groupe de champs:
    IF (fdim==2) THEN
      CALL xios_get_handle("fields_2D", fieldgroup)
    ELSE
      CALL xios_get_handle("fields_3D", fieldgroup)
    ENDIF

    !On regarde si le champ à déjà été créé ou non:
    IF (xios_is_valid_field(fieldname) .AND. .NOT. g_field_name == fieldname) THEN
      !Si ce champ existe via XML (ie, dès le premier passage, ie g_field_name != fieldname) alors rien d'autre à faire
      IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_field_to_file: Field ", trim(fieldname), "exists via XML"
      g_flag_xml = .TRUE.
      g_field_name = fieldname

    ELSE IF (.NOT. g_field_name == fieldname) THEN
      !Si premier pssage et champ indéfini, alors on le créé

      IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_field_to_file: Field ", trim(fieldname), "does not exist"

      !On le créé:
      CALL wxios_add_field(fieldname, fieldgroup, fieldlongname, fieldunit)
      IF (xios_is_valid_field(fieldname)) THEN
        IF (prt_level >= 10) WRITE(lunout, *) "wxios_add_field_to_file: Field ", trim(fieldname), "created"
      ENDIF

      g_flag_xml = .FALSE.
      g_field_name = fieldname

    END IF

    IF (.NOT. g_flag_xml) THEN
      !Champ existe déjà, mais pas XML, alors on l'ajoute
      !On ajoute le champ:
      CALL xios_get_handle(fname, f)
      CALL xios_add_child(f, field)


      !L'operation, sa frequence:
      freq_op%timestep = 1
      CALL xios_set_attr(field, field_ref = fieldname, operation = TRIM(ADJUSTL(operation)), freq_op = freq_op, prec = 4)


      !On rentre ses paramètres:
      CALL xios_set_attr(field, level = field_level, enabled = .TRUE.)

      IF (fdim==2) THEN
        !Si c'est un champ 2D:
        IF (prt_level >= 10) THEN
          WRITE(lunout, *) "wxios_add_field_to_file: 2D Field ", trim(fieldname), " in ", "X" // trim(fname), " configured with:"
          WRITE(lunout, *) "wxios_add_field_to_file: op=", TRIM(ADJUSTL(operation))
          WRITE(lunout, *) "wxios_add_field_to_file: freq_op=1ts", "; lvl=", field_level
        ENDIF
      ELSE
        !Si 3D :
        !On ajoute l'axe vertical qui va bien:
        CALL xios_set_attr(field, axis_ref = TRIM(ADJUSTL(axis_id)))

        IF (prt_level >= 10) THEN
          WRITE(lunout, *) "wxios_add_field_to_file: 3D Field", trim(fieldname), " in ", "X" // trim(fname), "configured with:"
          WRITE(lunout, *) "wxios_add_field_to_file: freq_op=1ts", "; lvl=", field_level
          WRITE(lunout, *) "wxios_add_field_to_file: axis=", TRIM(ADJUSTL(axis_id))
        ENDIF
      END IF

    ELSE
      !Sinon on se contente de l'activer:
      CALL xios_set_field_attr(fieldname, enabled = .TRUE.)
      !NB: This will override an enable=.FALSE. set by a user in the xml file;
      !   then the only way to not output the field is by changing its
      !   output level
    ENDIF

  END SUBROUTINE wxios_add_field_to_file

  !    SUBROUTINE wxios_update_calendar(ito)
  !        INTEGER, INTENT(IN) :: ito
  !        CALL xios_update_calendar(ito)
  !    END SUBROUTINE wxios_update_calendar

  !    SUBROUTINE wxios_write_2D(fieldname, fdata)
  !        CHARACTER(len=*), INTENT(IN) :: fieldname
  !        REAL, DIMENSION(:,:), INTENT(IN) :: fdata

  !        CALL xios_send_field(fieldname, fdata)
  !    END SUBROUTINE wxios_write_2D

  !    SUBROUTINE wxios_write_3D(fieldname, fdata)
  !        CHARACTER(len=*), INTENT(IN) :: fieldname
  !        REAL, DIMENSION(:,:,:), INTENT(IN) :: fdata

  !        CALL xios_send_field(fieldname, fdata)
  !    END SUBROUTINE wxios_write_3D

  SUBROUTINE wxios_closedef()
    CALL xios_close_context_definition()
    !        CALL xios_update_calendar(0)
  END SUBROUTINE wxios_closedef

  SUBROUTINE wxios_close()
    CALL xios_context_finalize()
    CALL xios_finalize()
  END SUBROUTINE wxios_close
END MODULE lmdz_wxios