source: LMDZ6/branches/Amaury_dev/libf/dyn3dmem/dynredem_loc.F90 @ 5119

Last change on this file since 5119 was 5118, checked in by abarral, 2 months ago

Replace iniprint.h by lmdz_iniprint.f90
(lint) along the way
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
File size: 10.5 KB
Line 
1SUBROUTINE dynredem0_loc(fichnom, iday_end, phis)
2
3  !-------------------------------------------------------------------------------
4  ! Write the NetCDF restart file (initialization).
5  !-------------------------------------------------------------------------------
6  USE IOIPSL
7  USE parallel_lmdz
8  USE mod_hallo
9  USE lmdz_strings, ONLY: maxlen
10  USE infotrac, ONLY: nqtot, tracers
11  USE netcdf, ONLY: nf90_create, nf90_def_dim, nf90_inq_varid, nf90_global, &
12          nf90_close, nf90_put_att, nf90_unlimited, nf90_clobber, &
13          nf90_64bit_offset
14  USE dynredem_mod, ONLY: cre_var, put_var, err, modname, fil
15  USE comvert_mod, ONLY: ap, bp, presnivs, pa, preff, nivsig, nivsigs, &
16          aps, bps, pseudoalt
17  USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad
18  USE logic_mod, ONLY: fxyhypb, ysinus
19  USE serre_mod, ONLY: clon, clat, grossismx, grossismy, dzoomx, dzoomy, &
20          taux, tauy
21  USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time
22  USE ener_mod, ONLY: etot0, ptot0, ztot0, stot0, ang0
23  USE lmdz_description, ONLY: descript
24  USE lmdz_iniprint, ONLY: lunout, prt_level
25
26  IMPLICIT NONE
27  include "dimensions.h"
28  include "paramet.h"
29  include "comgeom.h"
30  !===============================================================================
31  ! Arguments:
32  CHARACTER(LEN = *), INTENT(IN) :: fichnom          !--- FILE NAME
33  INTEGER, INTENT(IN) :: iday_end         !---
34  REAL, INTENT(IN) :: phis(ijb_u:ije_u)!--- GROUND GEOPOTENTIAL
35  !===============================================================================
36  ! Local variables:
37  INTEGER :: iq
38  INTEGER, PARAMETER :: length = 100
39  REAL :: tab_cntrl(length)                     !--- RUN PARAMETERS TABLE
40  REAL :: phis_glo(ip1jmp1)
41  !   For NetCDF:
42  CHARACTER(LEN = maxlen) :: unites
43  INTEGER :: indexID
44  INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID
45  INTEGER :: sID, sigID, nID, timID
46  INTEGER :: yyears0, jjour0, mmois0
47  REAL :: zjulian, hours
48  !===============================================================================
49  modname = 'dynredem0'; fil = fichnom
50  CALL Gather_field_u(phis, phis_glo, 1)
51  IF(mpi_rank/=0) RETURN
52
53  CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
54  CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
55
56  tab_cntrl(:) = 0.
57  tab_cntrl(1) = REAL(iim)
58  tab_cntrl(2) = REAL(jjm)
59  tab_cntrl(3) = REAL(llm)
60  tab_cntrl(4) = REAL(day_ref)
61  tab_cntrl(5) = REAL(annee_ref)
62  tab_cntrl(6) = rad
63  tab_cntrl(7) = omeg
64  tab_cntrl(8) = g
65  tab_cntrl(9) = cpp
66  tab_cntrl(10) = kappa
67  tab_cntrl(11) = daysec
68  tab_cntrl(12) = dtvr
69  tab_cntrl(13) = etot0
70  tab_cntrl(14) = ptot0
71  tab_cntrl(15) = ztot0
72  tab_cntrl(16) = stot0
73  tab_cntrl(17) = ang0
74  tab_cntrl(18) = pa
75  tab_cntrl(19) = preff
76
77  !    .....    parameters for zoom    ......
78  tab_cntrl(20) = clon
79  tab_cntrl(21) = clat
80  tab_cntrl(22) = grossismx
81  tab_cntrl(23) = grossismy
82
83  IF (fxyhypb)   THEN
84    tab_cntrl(24) = 1.
85    tab_cntrl(25) = dzoomx
86    tab_cntrl(26) = dzoomy
87    tab_cntrl(27) = 0.
88    tab_cntrl(28) = taux
89    tab_cntrl(29) = tauy
90  ELSE
91    tab_cntrl(24) = 0.
92    tab_cntrl(25) = dzoomx
93    tab_cntrl(26) = dzoomy
94    tab_cntrl(27) = 0.
95    tab_cntrl(28) = 0.
96    tab_cntrl(29) = 0.
97    IF(ysinus)  tab_cntrl(27) = 1.
98  END IF
99  tab_cntrl(30) = REAL(iday_end)
100  tab_cntrl(31) = REAL(itau_dyn + itaufin)
101  ! start_time: start_time of simulation (not necessarily 0.)
102  tab_cntrl(32) = start_time
103
104  !--- File creation
105  CALL err(nf90_create(fichnom, IOR(nf90_clobber, nf90_64bit_offset), nid))
106
107  !--- Some global attributes
108  CALL err(nf90_put_att(nid, nf90_global, "title", "Fichier demarrage dynamique"))
109
110  !--- Dimensions
111  CALL err(nf90_def_dim(nid, "index", length, indexID))
112  CALL err(nf90_def_dim(nid, "rlonu", iip1, rlonuID))
113  CALL err(nf90_def_dim(nid, "rlatu", jjp1, rlatuID))
114  CALL err(nf90_def_dim(nid, "rlonv", iip1, rlonvID))
115  CALL err(nf90_def_dim(nid, "rlatv", jjm, rlatvID))
116  CALL err(nf90_def_dim(nid, "sigs", llm, sID))
117  CALL err(nf90_def_dim(nid, "sig", llmp1, sigID))
118  CALL err(nf90_def_dim(nid, "temps", nf90_unlimited, timID))
119
120  !--- Define and save invariant fields
121  CALL put_var(nid, "controle", "Parametres de controle", [indexID], tab_cntrl)
122  CALL put_var(nid, "rlonu", "Longitudes des points U", [rlonuID], rlonu)
123  CALL put_var(nid, "rlatu", "Latitudes des points U", [rlatuID], rlatu)
124  CALL put_var(nid, "rlonv", "Longitudes des points V", [rlonvID], rlonv)
125  CALL put_var(nid, "rlatv", "Latitudes des points V", [rlatvID], rlatv)
126  CALL put_var(nid, "nivsigs", "Numero naturel des couches s", [sID], nivsigs)
127  CALL put_var(nid, "nivsig", "Numero naturel des couches sigma", [sigID], nivsig)
128  CALL put_var(nid, "ap", "Coefficient A pour hybride", [sigID], ap)
129  CALL put_var(nid, "bp", "Coefficient B pour hybride", [sigID], bp)
130  CALL put_var(nid, "presnivs", "", [sID], presnivs)
131  ! covariant <-> contravariant <-> natural conversion coefficients
132  CALL put_var(nid, "cu", "Coefficient de passage pour U", [rlonuID, rlatuID], cu)
133  CALL put_var(nid, "cv", "Coefficient de passage pour V", [rlonvID, rlatvID], cv)
134  CALL put_var(nid, "aire", "Aires de chaque maille", [rlonvID, rlatuID], aire)
135  CALL put_var(nid, "phisinit", "Geopotentiel au sol", [rlonvID, rlatuID], phis_glo)
136
137  !--- Define fields saved later
138  WRITE(unites, "('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')") &
139          yyears0, mmois0, jjour0
140  CALL cre_var(nid, "temps", "Temps de simulation", [timID], unites)
141  CALL cre_var(nid, "ucov", "Vitesse U", [rlonuID, rlatuID, sID, timID])
142  CALL cre_var(nid, "vcov", "Vitesse V", [rlonvID, rlatvID, sID, timID])
143  CALL cre_var(nid, "teta", "Temperature", [rlonvID, rlatuID, sID, timID])
144  DO iq = 1, nqtot
145    CALL cre_var(nid, tracers(iq)%name, tracers(iq)%longName, [rlonvID, rlatuID, sID, timID])
146  END DO
147  CALL cre_var(nid, "masse", "Masse d air", [rlonvID, rlatuID, sID, timID])
148  CALL cre_var(nid, "ps", "Pression au sol", [rlonvID, rlatuID, timID])
149  CALL err(nf90_close (nid))
150
151  WRITE(lunout, *)TRIM(modname) // ': iim,jjm,llm,iday_end', iim, jjm, llm, iday_end
152  WRITE(lunout, *)TRIM(modname) // ': rad,omeg,g,cpp,kappa', rad, omeg, g, cpp, kappa
153
154END SUBROUTINE dynredem0_loc
155
156!-------------------------------------------------------------------------------
157
158
159!-------------------------------------------------------------------------------
160
161SUBROUTINE dynredem1_loc(fichnom, time, vcov, ucov, teta, q, masse, ps)
162
163  !-------------------------------------------------------------------------------
164  ! Purpose: Write the NetCDF restart file (append).
165  !-------------------------------------------------------------------------------
166  USE parallel_lmdz
167  USE mod_hallo
168  USE lmdz_strings, ONLY: maxlen
169  USE infotrac, ONLY: nqtot, tracers, type_trac
170  USE control_mod
171  USE netcdf, ONLY: nf90_open, nf90_nowrite, nf90_get_var, nf90_inq_varid, &
172          nf90_close, nf90_write, nf90_put_var, nf90_noerr
173  USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, &
174          err, modname, fil, msg
175  USE temps_mod, ONLY: itau_dyn, itaufin
176  USE lmdz_description, ONLY: descript
177  USE lmdz_iniprint, ONLY: lunout, prt_level
178
179  IMPLICIT NONE
180  include "dimensions.h"
181  include "paramet.h"
182  include "comgeom.h"
183  !===============================================================================
184  ! Arguments:
185  CHARACTER(LEN = *), INTENT(IN) :: fichnom              !-- FILE NAME
186  REAL, INTENT(IN) :: time                         !-- TIME
187  REAL, INTENT(IN) :: vcov(ijb_v:ije_v, llm)        !-- V COVARIANT WIND
188  REAL, INTENT(IN) :: ucov(ijb_u:ije_u, llm)        !-- U COVARIANT WIND
189  REAL, INTENT(IN) :: teta(ijb_u:ije_u, llm)        !-- POTENTIAL TEMPERATURE
190  REAL, INTENT(INOUT) :: q(ijb_u:ije_u, llm, nqtot)  !-- TRACERS
191  REAL, INTENT(IN) :: masse(ijb_u:ije_u, llm)        !-- MASS PER CELL
192  REAL, INTENT(IN) :: ps(ijb_u:ije_u)            !-- GROUND PRESSURE
193  !===============================================================================
194  ! Local variables:
195  INTEGER :: iq, nid, vID, ierr, nid_trac, vID_trac
196  INTEGER, SAVE :: nb = 0
197  INTEGER, PARAMETER :: length = 100
198  REAL :: tab_cntrl(length) ! tableau des parametres du run
199  CHARACTER(LEN = maxlen) :: var, dum
200  LOGICAL :: lread_inca
201  !===============================================================================
202
203  !$OMP MASTER
204  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
205    modname = 'dynredem1_loc'; fil = fichnom
206    CALL err(nf90_open(fil, nf90_write, nid), "open", fil)
207
208    !--- Write/extend time coordinate
209    nb = nb + 1
210    var = "temps"
211    CALL err(nf90_inq_varid(nid, var, vID), "inq", var)
212    CALL err(nf90_put_var(nid, vID, [time]), "put", var)
213    WRITE(lunout, *)TRIM(modname) // ": Saving for ", nb, time
214
215    !--- Rewrite control table (itaufin undefined in dynredem0)
216    var = "controle"
217    CALL err(nf90_inq_varid(nid, var, vID), "inq", var)
218    CALL err(nf90_get_var(nid, vID, tab_cntrl), "get", var)
219    tab_cntrl(31) = DBLE(itau_dyn + itaufin)
220    CALL err(nf90_inq_varid(nid, var, vID), "inq", var)
221    CALL err(nf90_put_var(nid, vID, tab_cntrl), "put", var)
222  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
223  !$OMP END MASTER
224
225  !--- Save fields
226  CALL dynredem_write_u(nid, "ucov", ucov, llm)
227  CALL dynredem_write_v(nid, "vcov", vcov, llm)
228  CALL dynredem_write_u(nid, "teta", teta, llm)
229  CALL dynredem_write_u(nid, "masse", masse, llm)
230  CALL dynredem_write_u(nid, "ps", ps, 1)
231
232  !--- Tracers in file "start_trac.nc" (added by Anne)
233  lread_inca = .FALSE.
234  !$OMP MASTER
235  fil = "start_trac.nc"
236  IF(ANY(type_trac == ['inca', 'inco'])) INQUIRE(FILE = fil, EXIST = lread_inca)
237  IF(lread_inca) CALL err(nf90_open(fil, nf90_nowrite, nid_trac), "open")
238  !$OMP END MASTER
239  !$OMP BARRIER
240
241  !--- Save tracers
242  DO iq = 1, nqtot; var = TRIM(tracers(iq)%name); ierr = -1
243  IF(lread_inca) THEN                  !--- Possibly read from "start_trac.nc"
244    !$OMP MASTER
245    fil = "start_trac.nc"
246    ierr = nf90_inq_varid(nid_trac, var, vID_trac)
247    dum = 'inq'; IF(ierr==nf90_noerr) dum = 'fnd'
248    WRITE(lunout, *)msg(dum, var)
249    !$OMP END MASTER
250    !$OMP BARRIER
251    IF(ierr==nf90_noerr) CALL dynredem_read_u(nid_trac, var, q(:, :, iq), llm)
252  END IF
253  fil = fichnom
254  CALL dynredem_write_u(nid, var, q(:, :, iq), llm)
255  END DO
256
257  !$OMP MASTER
258  IF(mpi_rank==0) THEN !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
259    CALL err(nf90_close(nid), "close")
260    fil = "start_trac.nc"
261    IF(lread_inca) CALL err(nf90_close(nid_trac), "close")
262  END IF               !++++++++++++++++++++++++++++++++++++++++++++++++++++++++
263  !$OMP END MASTER
264
265END SUBROUTINE dynredem1_loc
266
Note: See TracBrowser for help on using the repository browser.