source: LMDZ6/branches/Amaury_dev/libf/dyn3dmem/caldyn_loc.f90 @ 5736

! $Id: $

SUBROUTINE caldyn_loc &
        (itau, ucov, vcov, teta, ps, masse, pk, pkf, phis, &
        phi, conser, du, dv, dteta, dp, w, pbaru, pbarv, time)
  USE parallel_lmdz
  USE Write_Field_loc
  USE caldyn_mod, ONLY: vcont, ucont, ang, p, massebx, masseby, &
          vorpot, ecin, bern, massebxy, convm
  USE comvert_mod, ONLY: ap, bp
  USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_DEBUGIO
  USE lmdz_comgeom

  USE lmdz_dimensions, ONLY: iim, jjm, llm, ndm
  USE lmdz_paramet
  IMPLICIT NONE

  !=======================================================================

  !  Auteur :  P. Le Van

  !   Objet:
  !   ------

  !   Calcul des tendances dynamiques.

  ! Modif 04/93 F.Forget
  !=======================================================================

  !-----------------------------------------------------------------------
  !   0. Declarations:
  !   ----------------




  !   Arguments:
  !   ----------

  LOGICAL, INTENT(IN) :: conser ! triggers printing some diagnostics ! not used
  INTEGER, INTENT(IN) :: itau ! time step index ! not used
  REAL, INTENT(IN) :: vcov(ijb_v:ije_v, llm) ! covariant meridional wind
  REAL, INTENT(IN) :: ucov(ijb_u:ije_u, llm) ! covariant zonal wind
  REAL, INTENT(IN) :: teta(ijb_u:ije_u, llm) ! potential temperature
  REAL, INTENT(IN) :: ps(ijb_u:ije_u) ! surface pressure
  REAL, INTENT(IN) :: phis(ijb_u:ije_u) ! geopotential at the surface
  REAL, INTENT(IN) :: pk(iip1, jjb_u:jje_u, llm) ! Exner at mid-layer
  REAL, INTENT(IN) :: pkf(ijb_u:ije_u, llm) ! filtered Exner
  REAL, INTENT(IN) :: phi(ijb_u:ije_u, llm) ! geopotential
  REAL, INTENT(OUT) :: masse(ijb_u:ije_u, llm) ! air mass
  REAL, INTENT(OUT) :: dv(ijb_v:ije_v, llm) ! tendency on vcov
  REAL, INTENT(OUT) :: du(ijb_u:ije_u, llm) ! tendency on ucov
  REAL, INTENT(OUT) :: dteta(ijb_u:ije_u, llm) ! tenddency on teta
  REAL, INTENT(OUT) :: dp(ijb_u:ije_u) ! tendency on ps
  REAL, INTENT(OUT) :: w(ijb_u:ije_u, llm) ! vertical velocity
  REAL, INTENT(OUT) :: pbaru(ijb_u:ije_u, llm) ! mass flux in the zonal direction
  REAL, INTENT(OUT) :: pbarv(ijb_v:ije_v, llm) ! mass flux in the meridional direction
  REAL, INTENT(IN) :: time ! current time

  !   Local:
  !   ------

  INTEGER :: ij, l, ijb, ije, ierr


  !-----------------------------------------------------------------------
  !   Compute dynamical tendencies:
  !--------------------------------

  ! compute contravariant winds ucont() and vcont
  CALL covcont_loc  (llm, ucov, vcov, ucont, vcont)
  ! compute pressure p()
  CALL pression_loc (ip1jmp1, ap, bp, ps, p)
  !ym      CALL psextbar (   ps   , psexbarxy                          )
  !$OMP BARRIER
  ! compute mass in each atmospheric mesh: masse()
  CALL massdair_loc (p, masse)
  ! compute X and Y-averages of mass, massebx() and masseby()
  CALL massbar_loc  (masse, massebx, masseby)
  ! compute XY-average of mass, massebxy()
  CALL massbarxy_loc(masse, massebxy)
  ! compute mass fluxes pbaru() and pbarv()
  CALL flumass_loc  (massebx, masseby, vcont, ucont, pbaru, pbarv)
  ! compute dteta() , horizontal converging flux of theta
  CALL dteta1_loc   (teta, pbaru, pbarv, dteta)
  ! compute convm(), horizontal converging flux of mass
  CALL convmas1_loc  (pbaru, pbarv, convm)
  !$OMP BARRIER
  CALL convmas2_loc  (convm)
  !$OMP BARRIER
  IF (CPPKEY_DEBUGIO) THEN
    CALL WriteField_u('ucont', ucont)
    CALL WriteField_v('vcont', vcont)
    CALL WriteField_u('p', p)
    CALL WriteField_u('masse', masse)
    CALL WriteField_u('massebx', massebx)
    CALL WriteField_v('masseby', masseby)
    CALL WriteField_v('massebxy', massebxy)
    CALL WriteField_u('pbaru', pbaru)
    CALL WriteField_v('pbarv', pbarv)
    CALL WriteField_u('dteta', dteta)
    CALL WriteField_u('convm', convm)
  END IF

  !$OMP BARRIER
  !$OMP MASTER
  ijb = ij_begin
  ije = ij_end
  ! compute pressure variation due to mass convergence
  DO ij = ijb, ije
    dp(ij) = convm(ij, 1) / airesurg(ij)
  ENDDO
  !$OMP END MASTER
  !$OMP BARRIER

  ! compute vertical velocity w()
  CALL vitvert_loc (convm, w)
  ! compute potential vorticity vorpot()
  CALL tourpot_loc (vcov, ucov, massebxy, vorpot)
  ! compute rotation induced du() and dv()
  CALL dudv1_loc   (vorpot, pbaru, pbarv, du, dv)

  IF (CPPKEY_DEBUGIO) THEN
    CALL WriteField_u('w', w)
    CALL WriteField_v('vorpot', vorpot)
    CALL WriteField_u('du', du)
    CALL WriteField_v('dv', dv)
  END IF

  ! compute kinetic energy ecin()
  CALL enercin_loc (vcov, ucov, vcont, ucont, ecin)
  ! compute Bernouilli function bern()
  CALL bernoui_loc (ip1jmp1, llm, phi, ecin, bern)
  ! compute and add du() and dv() contributions from Bernouilli and pressure
  CALL dudv2_loc   (teta, pkf, bern, du, dv)

  IF (CPPKEY_DEBUGIO) THEN
    CALL WriteField_u('ecin', ecin)
    CALL WriteField_u('bern', bern)
    CALL WriteField_u('du', du)
    CALL WriteField_v('dv', dv)
    CALL WriteField_u('pkf', pkf)
  END IF

  ijb = ij_begin - iip1
  ije = ij_end + iip1

  IF (pole_nord) ijb = ij_begin
  IF (pole_sud) ije = ij_end

  !$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  DO l = 1, llm
    DO ij = ijb, ije
      ang(ij, l) = ucov(ij, l) + constang(ij)
    ENDDO
  ENDDO
  !$OMP END DO

  ! compute vertical advection contributions to du(), dv() and dteta()
  CALL advect_new_loc(ang, vcov, teta, w, massebx, masseby, du, dv, dteta)

  !  WARNING probleme de peridocite de dv sur les PC/linux. Pb d'arrondi
  ! probablement. Observe sur le code compile avec pgf90 3.0-1
  ijb = ij_begin
  ije = ij_end
  IF (pole_sud) ije = ij_end - iip1

  !$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
  DO l = 1, llm
    DO ij = ijb, ije, iip1
      IF(dv(ij, l)/=dv(ij + iim, l))  THEN
        ! PRINT *,'!!!ATTENTION!!! probleme de periodicite sur vcov',
        !    ,   ' dans caldyn'
        ! PRINT *,' l,  ij = ', l, ij, ij+iim,dv(ij+iim,l),dv(ij,l)
        dv(ij + iim, l) = dv(ij, l)
      endif
    enddo
  enddo
  !$OMP END DO NOWAIT

  ! Ehouarn: NB: output of control variables not implemented...


END SUBROUTINE caldyn_loc