| 1 | SUBROUTINE dynredem0(fichnom, iday_end, phis) |
|---|
| 2 | |
|---|
| 3 | !------------------------------------------------------------------------------- |
|---|
| 4 | ! Write the NetCDF restart file (initialization). |
|---|
| 5 | !------------------------------------------------------------------------------- |
|---|
| 6 | USE IOIPSL |
|---|
| 7 | USE lmdz_strings, ONLY: maxlen |
|---|
| 8 | USE infotrac, ONLY: nqtot, tracers |
|---|
| 9 | USE netcdf, ONLY: nf90_create, nf90_def_dim, nf90_inq_varid, nf90_global, & |
|---|
| 10 | nf90_close, nf90_put_att, nf90_unlimited, nf90_clobber, & |
|---|
| 11 | nf90_64bit_offset |
|---|
| 12 | USE dynredem_mod, ONLY: cre_var, put_var1, put_var2, err, modname, fil |
|---|
| 13 | USE comvert_mod, ONLY: ap, bp, presnivs, pa, preff, nivsig, nivsigs |
|---|
| 14 | USE comconst_mod, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad |
|---|
| 15 | USE logic_mod, ONLY: fxyhypb, ysinus |
|---|
| 16 | USE serre_mod, ONLY: clon, clat, grossismx, grossismy, dzoomx, dzoomy, & |
|---|
| 17 | taux, tauy |
|---|
| 18 | USE temps_mod, ONLY: annee_ref, day_ref, itau_dyn, itaufin, start_time |
|---|
| 19 | USE ener_mod, ONLY: etot0, ptot0, ztot0, stot0, ang0 |
|---|
| 20 | USE lmdz_description, ONLY: descript |
|---|
| 21 | USE lmdz_iniprint, ONLY: lunout, prt_level |
|---|
| 22 | |
|---|
| 23 | IMPLICIT NONE |
|---|
| 24 | INCLUDE "dimensions.h" |
|---|
| 25 | INCLUDE "paramet.h" |
|---|
| 26 | INCLUDE "comgeom2.h" |
|---|
| 27 | !=============================================================================== |
|---|
| 28 | ! Arguments: |
|---|
| 29 | CHARACTER(LEN = *), INTENT(IN) :: fichnom !--- FILE NAME |
|---|
| 30 | INTEGER, INTENT(IN) :: iday_end !--- |
|---|
| 31 | REAL, INTENT(IN) :: phis(iip1, jjp1) !--- GROUND GEOPOTENTIAL |
|---|
| 32 | !=============================================================================== |
|---|
| 33 | ! Local variables: |
|---|
| 34 | INTEGER :: iq |
|---|
| 35 | INTEGER, PARAMETER :: length = 100 |
|---|
| 36 | REAL :: tab_cntrl(length) !--- RUN PARAMETERS TABLE |
|---|
| 37 | ! For NetCDF: |
|---|
| 38 | CHARACTER(LEN = maxlen) :: unites |
|---|
| 39 | INTEGER :: indexID |
|---|
| 40 | INTEGER :: rlonuID, rlonvID, rlatuID, rlatvID |
|---|
| 41 | INTEGER :: sID, sigID, nID, timID |
|---|
| 42 | INTEGER :: yyears0, jjour0, mmois0 |
|---|
| 43 | REAL :: zjulian, hours |
|---|
| 44 | !=============================================================================== |
|---|
| 45 | modname = 'dynredem0'; fil = fichnom |
|---|
| 46 | CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian) |
|---|
| 47 | CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours) |
|---|
| 48 | |
|---|
| 49 | tab_cntrl(:) = 0. |
|---|
| 50 | tab_cntrl(1) = REAL(iim) |
|---|
| 51 | tab_cntrl(2) = REAL(jjm) |
|---|
| 52 | tab_cntrl(3) = REAL(llm) |
|---|
| 53 | tab_cntrl(4) = REAL(day_ref) |
|---|
| 54 | tab_cntrl(5) = REAL(annee_ref) |
|---|
| 55 | tab_cntrl(6) = rad |
|---|
| 56 | tab_cntrl(7) = omeg |
|---|
| 57 | tab_cntrl(8) = g |
|---|
| 58 | tab_cntrl(9) = cpp |
|---|
| 59 | tab_cntrl(10) = kappa |
|---|
| 60 | tab_cntrl(11) = daysec |
|---|
| 61 | tab_cntrl(12) = dtvr |
|---|
| 62 | tab_cntrl(13) = etot0 |
|---|
| 63 | tab_cntrl(14) = ptot0 |
|---|
| 64 | tab_cntrl(15) = ztot0 |
|---|
| 65 | tab_cntrl(16) = stot0 |
|---|
| 66 | tab_cntrl(17) = ang0 |
|---|
| 67 | tab_cntrl(18) = pa |
|---|
| 68 | tab_cntrl(19) = preff |
|---|
| 69 | |
|---|
| 70 | ! ..... parameters for zoom ...... |
|---|
| 71 | tab_cntrl(20) = clon |
|---|
| 72 | tab_cntrl(21) = clat |
|---|
| 73 | tab_cntrl(22) = grossismx |
|---|
| 74 | tab_cntrl(23) = grossismy |
|---|
| 75 | |
|---|
| 76 | IF (fxyhypb) THEN |
|---|
| 77 | tab_cntrl(24) = 1. |
|---|
| 78 | tab_cntrl(25) = dzoomx |
|---|
| 79 | tab_cntrl(26) = dzoomy |
|---|
| 80 | tab_cntrl(27) = 0. |
|---|
| 81 | tab_cntrl(28) = taux |
|---|
| 82 | tab_cntrl(29) = tauy |
|---|
| 83 | ELSE |
|---|
| 84 | tab_cntrl(24) = 0. |
|---|
| 85 | tab_cntrl(25) = dzoomx |
|---|
| 86 | tab_cntrl(26) = dzoomy |
|---|
| 87 | tab_cntrl(27) = 0. |
|---|
| 88 | tab_cntrl(28) = 0. |
|---|
| 89 | tab_cntrl(29) = 0. |
|---|
| 90 | IF(ysinus) tab_cntrl(27) = 1. |
|---|
| 91 | END IF |
|---|
| 92 | tab_cntrl(30) = REAL(iday_end) |
|---|
| 93 | tab_cntrl(31) = REAL(itau_dyn + itaufin) |
|---|
| 94 | ! start_time: start_time of simulation (not necessarily 0.) |
|---|
| 95 | tab_cntrl(32) = start_time |
|---|
| 96 | |
|---|
| 97 | !--- File creation |
|---|
| 98 | CALL err(nf90_create(fichnom, IOR(nf90_clobber, nf90_64bit_offset), nid)) |
|---|
| 99 | |
|---|
| 100 | !--- Some global attributes |
|---|
| 101 | CALL err(nf90_put_att(nid, nf90_global, "title", "Fichier demarrage dynamique")) |
|---|
| 102 | |
|---|
| 103 | !--- Dimensions |
|---|
| 104 | CALL err(nf90_def_dim(nid, "index", length, indexID)) |
|---|
| 105 | CALL err(nf90_def_dim(nid, "rlonu", iip1, rlonuID)) |
|---|
| 106 | CALL err(nf90_def_dim(nid, "rlatu", jjp1, rlatuID)) |
|---|
| 107 | CALL err(nf90_def_dim(nid, "rlonv", iip1, rlonvID)) |
|---|
| 108 | CALL err(nf90_def_dim(nid, "rlatv", jjm, rlatvID)) |
|---|
| 109 | CALL err(nf90_def_dim(nid, "sigs", llm, sID)) |
|---|
| 110 | CALL err(nf90_def_dim(nid, "sig", llmp1, sigID)) |
|---|
| 111 | CALL err(nf90_def_dim(nid, "temps", nf90_unlimited, timID)) |
|---|
| 112 | |
|---|
| 113 | !--- Define and save invariant fields |
|---|
| 114 | CALL put_var1(nid, "controle", "Parametres de controle", [indexID], tab_cntrl) |
|---|
| 115 | CALL put_var1(nid, "rlonu", "Longitudes des points U", [rlonuID], rlonu) |
|---|
| 116 | CALL put_var1(nid, "rlatu", "Latitudes des points U", [rlatuID], rlatu) |
|---|
| 117 | CALL put_var1(nid, "rlonv", "Longitudes des points V", [rlonvID], rlonv) |
|---|
| 118 | CALL put_var1(nid, "rlatv", "Latitudes des points V", [rlatvID], rlatv) |
|---|
| 119 | CALL put_var1(nid, "nivsigs", "Numero naturel des couches s", [sID], nivsigs) |
|---|
| 120 | CALL put_var1(nid, "nivsig", "Numero naturel des couches sigma", [sigID], nivsig) |
|---|
| 121 | CALL put_var1(nid, "ap", "Coefficient A pour hybride", [sigID], ap) |
|---|
| 122 | CALL put_var1(nid, "bp", "Coefficient B pour hybride", [sigID], bp) |
|---|
| 123 | CALL put_var1(nid, "presnivs", "", [sID], presnivs) |
|---|
| 124 | ! covariant <-> contravariant <-> natural conversion coefficients |
|---|
| 125 | CALL put_var2(nid, "cu", "Coefficient de passage pour U", [rlonuID, rlatuID], cu) |
|---|
| 126 | CALL put_var2(nid, "cv", "Coefficient de passage pour V", [rlonvID, rlatvID], cv) |
|---|
| 127 | CALL put_var2(nid, "aire", "Aires de chaque maille", [rlonvID, rlatuID], aire) |
|---|
| 128 | CALL put_var2(nid, "phisinit", "Geopotentiel au sol", [rlonvID, rlatuID], phis) |
|---|
| 129 | |
|---|
| 130 | !--- Define fields saved later |
|---|
| 131 | WRITE(unites, "('days since ',i4,'-',i2.2,'-',i2.2,' 00:00:00')") & |
|---|
| 132 | yyears0, mmois0, jjour0 |
|---|
| 133 | CALL cre_var(nid, "temps", "Temps de simulation", [timID], unites) |
|---|
| 134 | CALL cre_var(nid, "ucov", "Vitesse U", [rlonuID, rlatuID, sID, timID]) |
|---|
| 135 | CALL cre_var(nid, "vcov", "Vitesse V", [rlonvID, rlatvID, sID, timID]) |
|---|
| 136 | CALL cre_var(nid, "teta", "Temperature", [rlonvID, rlatuID, sID, timID]) |
|---|
| 137 | DO iq = 1, nqtot |
|---|
| 138 | CALL cre_var(nid, tracers(iq)%name, tracers(iq)%longName, [rlonvID, rlatuID, sID, timID]) |
|---|
| 139 | END DO |
|---|
| 140 | CALL cre_var(nid, "masse", "Masse d air", [rlonvID, rlatuID, sID, timID]) |
|---|
| 141 | CALL cre_var(nid, "ps", "Pression au sol", [rlonvID, rlatuID, timID]) |
|---|
| 142 | CALL err(nf90_close (nid)) |
|---|
| 143 | |
|---|
| 144 | WRITE(lunout, *)TRIM(modname) // ': iim,jjm,llm,iday_end', iim, jjm, llm, iday_end |
|---|
| 145 | WRITE(lunout, *)TRIM(modname) // ': rad,omeg,g,cpp,kappa', rad, omeg, g, cpp, kappa |
|---|
| 146 | |
|---|
| 147 | END SUBROUTINE dynredem0 |
|---|
| 148 | |
|---|
| 149 | !------------------------------------------------------------------------------- |
|---|
| 150 | |
|---|
| 151 | |
|---|
| 152 | !------------------------------------------------------------------------------- |
|---|
| 153 | |
|---|
| 154 | SUBROUTINE dynredem1(fichnom, time, vcov, ucov, teta, q, masse, ps) |
|---|
| 155 | |
|---|
| 156 | !------------------------------------------------------------------------------- |
|---|
| 157 | ! Purpose: Write the NetCDF restart file (append). |
|---|
| 158 | !------------------------------------------------------------------------------- |
|---|
| 159 | USE lmdz_strings, ONLY: maxlen |
|---|
| 160 | USE infotrac, ONLY: nqtot, tracers, type_trac |
|---|
| 161 | USE control_mod |
|---|
| 162 | USE netcdf, ONLY: nf90_open, nf90_nowrite, nf90_get_var, nf90_inq_varid, & |
|---|
| 163 | nf90_close, nf90_write, nf90_put_var, nf90_noerr |
|---|
| 164 | USE dynredem_mod, ONLY: dynredem_write_u, dynredem_write_v, dynredem_read_u, & |
|---|
| 165 | err, modname, fil, msg |
|---|
| 166 | USE temps_mod, ONLY: itau_dyn, itaufin |
|---|
| 167 | USE lmdz_description, ONLY: descript |
|---|
| 168 | USE lmdz_iniprint, ONLY: lunout, prt_level |
|---|
| 169 | |
|---|
| 170 | IMPLICIT NONE |
|---|
| 171 | INCLUDE "dimensions.h" |
|---|
| 172 | INCLUDE "paramet.h" |
|---|
| 173 | INCLUDE "comgeom.h" |
|---|
| 174 | !=============================================================================== |
|---|
| 175 | ! Arguments: |
|---|
| 176 | CHARACTER(LEN = *), INTENT(IN) :: fichnom !-- FILE NAME |
|---|
| 177 | REAL, INTENT(IN) :: time !-- TIME |
|---|
| 178 | REAL, INTENT(IN) :: vcov(iip1, jjm, llm) !-- V COVARIANT WIND |
|---|
| 179 | REAL, INTENT(IN) :: ucov(iip1, jjp1, llm) !-- U COVARIANT WIND |
|---|
| 180 | REAL, INTENT(IN) :: teta(iip1, jjp1, llm) !-- POTENTIAL TEMPERATURE |
|---|
| 181 | REAL, INTENT(INOUT) :: q(iip1, jjp1, llm, nqtot) !-- TRACERS |
|---|
| 182 | REAL, INTENT(IN) :: masse(iip1, jjp1, llm) !-- MASS PER CELL |
|---|
| 183 | REAL, INTENT(IN) :: ps(iip1, jjp1) !-- GROUND PRESSURE |
|---|
| 184 | !=============================================================================== |
|---|
| 185 | ! Local variables: |
|---|
| 186 | INTEGER :: iq, nid, vID, ierr, nid_trac, vID_trac |
|---|
| 187 | INTEGER, SAVE :: nb = 0 |
|---|
| 188 | INTEGER, PARAMETER :: length = 100 |
|---|
| 189 | REAL :: tab_cntrl(length) ! tableau des parametres du run |
|---|
| 190 | CHARACTER(LEN = maxlen) :: var, dum |
|---|
| 191 | LOGICAL :: lread_inca |
|---|
| 192 | !=============================================================================== |
|---|
| 193 | |
|---|
| 194 | modname = 'dynredem1'; fil = fichnom |
|---|
| 195 | CALL err(nf90_open(fil, nf90_write, nid), "open", fil) |
|---|
| 196 | |
|---|
| 197 | !--- Write/extend time coordinate |
|---|
| 198 | nb = nb + 1 |
|---|
| 199 | var = "temps" |
|---|
| 200 | CALL err(nf90_inq_varid(nid, var, vID), "inq", var) |
|---|
| 201 | CALL err(nf90_put_var(nid, vID, [time]), "put", var) |
|---|
| 202 | WRITE(lunout, *)TRIM(modname) // ": Saving for ", nb, time |
|---|
| 203 | |
|---|
| 204 | !--- Rewrite control table (itaufin undefined in dynredem0) |
|---|
| 205 | var = "controle" |
|---|
| 206 | CALL err(nf90_inq_varid(nid, var, vID), "inq", var) |
|---|
| 207 | CALL err(nf90_get_var(nid, vID, tab_cntrl), "get", var) |
|---|
| 208 | tab_cntrl(31) = DBLE(itau_dyn + itaufin) |
|---|
| 209 | CALL err(nf90_inq_varid(nid, var, vID), "inq", var) |
|---|
| 210 | CALL err(nf90_put_var(nid, vID, tab_cntrl), "put", var) |
|---|
| 211 | |
|---|
| 212 | !--- Save fields |
|---|
| 213 | CALL dynredem_write_u(nid, "ucov", ucov, llm) |
|---|
| 214 | CALL dynredem_write_v(nid, "vcov", vcov, llm) |
|---|
| 215 | CALL dynredem_write_u(nid, "teta", teta, llm) |
|---|
| 216 | CALL dynredem_write_u(nid, "masse", masse, llm) |
|---|
| 217 | CALL dynredem_write_u(nid, "ps", ps, 1) |
|---|
| 218 | |
|---|
| 219 | !--- Tracers in file "start_trac.nc" (added by Anne) |
|---|
| 220 | lread_inca = .FALSE.; fil = "start_trac.nc" |
|---|
| 221 | IF(ANY(type_trac == ['inca', 'inco'])) INQUIRE(FILE = fil, EXIST = lread_inca) |
|---|
| 222 | IF(lread_inca) CALL err(nf90_open(fil, nf90_nowrite, nid_trac), "open") |
|---|
| 223 | |
|---|
| 224 | !--- Save tracers |
|---|
| 225 | DO iq = 1, nqtot; var = TRIM(tracers(iq)%name); ierr = -1 |
|---|
| 226 | IF(lread_inca) THEN !--- Possibly read from "start_trac.nc" |
|---|
| 227 | fil = "start_trac.nc" |
|---|
| 228 | ierr = nf90_inq_varid(nid_trac, var, vID_trac) |
|---|
| 229 | dum = 'inq'; IF(ierr==nf90_noerr) dum = 'fnd' |
|---|
| 230 | WRITE(lunout, *)msg(dum, var) |
|---|
| 231 | |
|---|
| 232 | IF(ierr==nf90_noerr) CALL dynredem_read_u(nid_trac, var, q(:, :, :, iq), llm) |
|---|
| 233 | END IF |
|---|
| 234 | fil = fichnom |
|---|
| 235 | CALL dynredem_write_u(nid, var, q(:, :, :, iq), llm) |
|---|
| 236 | END DO |
|---|
| 237 | CALL err(nf90_close(nid), "close") |
|---|
| 238 | fil = "start_trac.nc" |
|---|
| 239 | IF(lread_inca) CALL err(nf90_close(nid_trac), "close") |
|---|
| 240 | |
|---|
| 241 | END SUBROUTINE dynredem1 |
|---|
| 242 | |
|---|
