source: LMDZ5/trunk/libf/phylmd/surf_land_bucket_mod.F90 @ 2333

Last change on this file since 2333 was 2254, checked in by fhourdin, 10 years ago

Modification du calcul des flux air/mer
1) Introduction d'un facteur f_qsat_oce=0.98 devant qsat dans le calcul
de l'évaporation sur océan pour tenir compte de la moindre évaporation
de l'eau salée.
2) Introduction d'une différentiation entre z0 pour le sensible, z0h,
et le latent, z0q, imposé constant z0q=f_z0qh_oce*z0h

Modification of air/sea fluxes computation
1) Introduction of a correcting factor f_qsat_oce=0.98 on qsat
to account for the weaker evaporation of salty water.
2) Introduction of z0q=f_z0qh_oce*z0h

  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 6.1 KB
Line 
1!
2MODULE surf_land_bucket_mod
3!
4! Surface land bucket module
5!
6! This module is used when no external land model is choosen.
7!
8  IMPLICIT NONE
9
10CONTAINS
11
12  SUBROUTINE surf_land_bucket(itime, jour, knon, knindex, debut, dtime,&
13       tsurf, p1lay, tq_cdrag, precip_rain, precip_snow, temp_air, &
14       spechum, petAcoef, peqAcoef, petBcoef, peqBcoef, pref, &
15       u1, v1, gustiness, rugoro, swnet, lwnet, &
16       snow, qsol, agesno, tsoil, &
17       qsurf, z0_new, alb1_new, alb2_new, evap, &
18       fluxsens, fluxlat, tsurf_new, dflux_s, dflux_l)
19
20    USE limit_read_mod
21    USE surface_data
22    USE fonte_neige_mod
23    USE calcul_fluxs_mod
24    USE cpl_mod
25    USE dimphy
26    USE comgeomphy
27    USE mod_grid_phy_lmdz
28    USE mod_phys_lmdz_para
29    USE indice_sol_mod
30!****************************************************************************************
31! Bucket calculations for surface.
32!
33    INCLUDE "clesphys.h"
34    INCLUDE "dimsoil.h"
35    INCLUDE "YOMCST.h"
36
37! Input variables 
38!****************************************************************************************
39    INTEGER, INTENT(IN)                     :: itime, jour, knon
40    INTEGER, DIMENSION(klon), INTENT(IN)    :: knindex
41    LOGICAL, INTENT(IN)                     :: debut
42    REAL, INTENT(IN)                        :: dtime
43    REAL, DIMENSION(klon), INTENT(IN)       :: tsurf
44    REAL, DIMENSION(klon), INTENT(IN)       :: p1lay
45    REAL, DIMENSION(klon), INTENT(IN)       :: tq_cdrag
46    REAL, DIMENSION(klon), INTENT(IN)       :: precip_rain, precip_snow
47    REAL, DIMENSION(klon), INTENT(IN)       :: temp_air, spechum
48    REAL, DIMENSION(klon), INTENT(IN)       :: petAcoef, peqAcoef
49    REAL, DIMENSION(klon), INTENT(IN)       :: petBcoef, peqBcoef
50    REAL, DIMENSION(klon), INTENT(IN)       :: pref
51    REAL, DIMENSION(klon), INTENT(IN)       :: u1, v1, gustiness
52    REAL, DIMENSION(klon), INTENT(IN)       :: rugoro
53    REAL, DIMENSION(klon), INTENT(IN)       :: swnet, lwnet
54
55! In/Output variables
56!****************************************************************************************
57    REAL, DIMENSION(klon), INTENT(INOUT)          :: snow, qsol
58    REAL, DIMENSION(klon), INTENT(INOUT)          :: agesno
59    REAL, DIMENSION(klon, nsoilmx), INTENT(INOUT) :: tsoil
60
61! Output variables
62!****************************************************************************************
63    REAL, DIMENSION(klon), INTENT(OUT)       :: qsurf
64    REAL, DIMENSION(klon), INTENT(OUT)       :: z0_new
65    REAL, DIMENSION(klon), INTENT(OUT)       :: alb1_new, alb2_new
66    REAL, DIMENSION(klon), INTENT(OUT)       :: evap, fluxsens, fluxlat
67    REAL, DIMENSION(klon), INTENT(OUT)       :: tsurf_new
68    REAL, DIMENSION(klon), INTENT(OUT)       :: dflux_s, dflux_l     
69
70! Local variables
71!****************************************************************************************
72    REAL, DIMENSION(klon) :: soilcap, soilflux
73    REAL, DIMENSION(klon) :: cal, beta, dif_grnd, capsol
74    REAL, DIMENSION(klon) :: alb_neig, alb_lim
75    REAL, DIMENSION(klon) :: zfra
76    REAL, DIMENSION(klon) :: radsol       ! total net radiance at surface
77    REAL, DIMENSION(klon) :: u0, v0, u1_lay, v1_lay
78    REAL, DIMENSION(klon) :: dummy_riverflow,dummy_coastalflow
79    INTEGER               :: i
80!
81!****************************************************************************************
82
83
84!
85!* Read from limit.nc : albedo(alb_lim), length of rugosity(z0_new)
86!
87    CALL limit_read_rug_alb(itime, dtime, jour,&
88         knon, knindex, &
89         z0_new, alb_lim)
90!
91!* Calcultaion of fluxes
92!
93
94! calculate total absorbed radiance at surface
95       radsol(:) = 0.0
96       radsol(1:knon) = swnet(1:knon) + lwnet(1:knon)
97
98! calculate constants
99    CALL calbeta(dtime, is_ter, knon, snow, qsol, beta, capsol, dif_grnd)
100    if (type_veget=='betaclim') then
101       CALL calbeta_clim(knon,jour,rlatd(knindex(1:knon)),beta)
102    endif
103       
104! calculate temperature, heat capacity and conduction flux in soil
105    IF (soil_model) THEN
106       CALL soil(dtime, is_ter, knon, snow, tsurf, tsoil, soilcap, soilflux)
107       DO i=1, knon
108          cal(i) = RCPD / soilcap(i)
109          radsol(i) = radsol(i)  + soilflux(i)
110       END DO
111    ELSE
112       cal(:) = RCPD * capsol(:)
113       IF (klon_glo .EQ. 1) THEN
114         cal(:) = 0.
115       ENDIF
116    ENDIF
117   
118! Suppose zero surface speed
119    u0(:)=0.0
120    v0(:)=0.0
121    u1_lay(:) = u1(:) - u0(:)
122    v1_lay(:) = v1(:) - v0(:)
123
124    CALL calcul_fluxs(knon, is_ter, dtime, &
125         tsurf, p1lay, cal, beta, tq_cdrag, tq_cdrag, pref, &
126         precip_rain, precip_snow, snow, qsurf,  &
127         radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, &
128         1.,petAcoef, peqAcoef, petBcoef, peqBcoef, &
129         tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l)
130   
131!
132!* Calculate snow height, run_off, age of snow
133!     
134    CALL fonte_neige( knon, is_ter, knindex, dtime, &
135         tsurf, precip_rain, precip_snow, &
136         snow, qsol, tsurf_new, evap)
137!
138!* Calculate the age of snow
139!
140    CALL albsno(klon,knon,dtime,agesno(:),alb_neig(:), precip_snow(:)) 
141   
142    WHERE (snow(1 : knon) .LT. 0.0001) agesno(1 : knon) = 0.
143   
144    DO i=1, knon
145       zfra(i) = MAX(0.0,MIN(1.0, snow(i)/(snow(i)+10.0)))
146       alb_lim(i)  = alb_neig(i) *zfra(i) + alb_lim(i)*(1.0-zfra(i))
147    END DO
148
149!
150!* Return albedo :
151!    alb1_new and alb2_new are here given the same values
152!
153    alb1_new(:) = 0.0
154    alb2_new(:) = 0.0
155    alb1_new(1:knon) = alb_lim(1:knon)
156    alb2_new(1:knon) = alb_lim(1:knon)
157       
158!
159!* Calculate the rugosity
160!
161    DO i = 1, knon
162       z0_new(i) = MAX(1.5e-05,SQRT(z0_new(i)**2 + rugoro(i)**2))
163    END DO
164
165!* Send to coupler
166!  The run-off from river and coast are not calculated in the bucket modele.
167!  For testing purpose of the coupled modele we put the run-off to zero.
168    IF (type_ocean=='couple') THEN
169       dummy_riverflow(:)   = 0.0
170       dummy_coastalflow(:) = 0.0
171       CALL cpl_send_land_fields(itime, knon, knindex, &
172            dummy_riverflow, dummy_coastalflow)
173    ENDIF
174
175!
176!* End
177!
178  END SUBROUTINE surf_land_bucket
179!
180!****************************************************************************************
181!
182END MODULE surf_land_bucket_mod
Note: See TracBrowser for help on using the repository browser.