Context Navigation

readaerosol.F90 @ 1784

Last change on this file since 1784 was 1609, checked in by jghattas, 13 years ago
Added more information while probleme in reading aerosols file.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 24.4 KB

Line
1	! $Id: readaerosol.F90 1609 2012-01-19 18:31:39Z idelkadi $
2	!
3	MODULE readaerosol_mod
4
5	REAL, SAVE :: not_valid=-333.
6
7	CONTAINS
8
9	SUBROUTINE readaerosol(name_aero, type, filename, iyr_in, klev_src, pt_ap, pt_b, pt_out, psurf, load)
10
11	!****************************************************************************************
12	! This routine will read the aersosol from file.
13	!
14	! Read a year data with get_aero_fromfile depending on aer_type :
15	! - actuel : read year 1980
16	! - preind : read natural data
17	! - scenario : read one or two years and do eventually linare time interpolation
18	!
19	! Return pointer, pt_out, to the year read or result from interpolation
20	!****************************************************************************************
21	USE dimphy
22
23	IMPLICIT NONE
24
25	INCLUDE "iniprint.h"
26
27	! Input arguments
28	CHARACTER(len=7), INTENT(IN) :: name_aero
29	CHARACTER(len=*), INTENT(IN) :: type ! actuel, annuel, scenario or preind
30	CHARACTER(len=8), INTENT(IN) :: filename
31	INTEGER, INTENT(IN) :: iyr_in
32
33	! Output
34	INTEGER, INTENT(OUT) :: klev_src
35	REAL, POINTER, DIMENSION(:) :: pt_ap ! Pointer for describing the vertical levels
36	REAL, POINTER, DIMENSION(:) :: pt_b ! Pointer for describing the vertical levels
37	REAL, POINTER, DIMENSION(:,:,:) :: pt_out ! The massvar distributions, DIMENSION(klon, klev_src, 12)
38	REAL, DIMENSION(klon,12), INTENT(OUT) :: psurf ! Surface pression for 12 months
39	REAL, DIMENSION(klon,12), INTENT(OUT) :: load ! Aerosol mass load in each column for 12 months
40
41	! Local variables
42	CHARACTER(len=4) :: cyear
43	REAL, POINTER, DIMENSION(:,:,:) :: pt_2
44	REAL, DIMENSION(klon,12) :: psurf2, load2
45	REAL :: p0 ! Reference pressure
46	INTEGER :: iyr1, iyr2, klev_src2
47	INTEGER :: it, k, i
48	LOGICAL, PARAMETER :: lonlyone=.FALSE.
49
50	!****************************************************************************************
51	! Read data depending on aer_type
52	!
53	!****************************************************************************************
54
55	IF (type == 'actuel') THEN
56	! Read and return data for year 1980
57	!****************************************************************************************
58	cyear='1980'
59	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
60	! pt_out has dimensions (klon, klev_src, 12)
61	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
62
63
64	ELSE IF (type == 'preind') THEN
65	! Read and return data from file with suffix .nat
66	!****************************************************************************************
67	cyear='.nat'
68	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
69	! pt_out has dimensions (klon, klev_src, 12)
70	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
71
72	ELSE IF (type == 'annuel') THEN
73	! Read and return data from scenario annual files
74	!****************************************************************************************
75	WRITE(cyear,'(I4)') iyr_in
76	WRITE(lunout,*) 'get_aero 3 iyr_in=', iyr_in,' ',cyear
77	! get_aero_fromfile returns pt_out allocated and initialized with data for nbr_tsteps month
78	! pt_out has dimensions (klon, klev_src, 12)
79	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
80
81	ELSE IF (type == 'scenario') THEN
82	! Read data depending on actual year and interpolate if necessary
83	!****************************************************************************************
84	IF (iyr_in .LT. 1850) THEN
85	cyear='.nat'
86	WRITE(lunout,*) 'get_aero 1 iyr_in=', iyr_in,' ',cyear
87	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
88	! pt_out has dimensions (klon, klev_src, 12)
89	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
90
91	ELSE IF (iyr_in .GE. 2100) THEN
92	cyear='2100'
93	WRITE(lunout,*) 'get_aero 2 iyr_in=', iyr_in,' ',cyear
94	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
95	! pt_out has dimensions (klon, klev_src, 12)
96	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
97
98	ELSE
99	! Read data from 2 decades and interpolate to actual year
100	! a) from actual 10-yr-period
101	IF (iyr_in.LT.1900) THEN
102	iyr1 = 1850
103	iyr2 = 1900
104	ELSE IF (iyr_in.GE.1900.AND.iyr_in.LT.1920) THEN
105	iyr1 = 1900
106	iyr2 = 1920
107	ELSE
108	iyr1 = INT(iyr_in/10)*10
109	iyr2 = INT(1+iyr_in/10)*10
110	ENDIF
111
112	WRITE(cyear,'(I4)') iyr1
113	WRITE(lunout,*) 'get_aero 3 iyr_in=', iyr_in,' ',cyear
114	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
115	! pt_out has dimensions (klon, klev_src, 12)
116	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
117
118	! If to read two decades:
119	IF (.NOT.lonlyone) THEN
120
121	! b) from the next following one
122	WRITE(cyear,'(I4)') iyr2
123	WRITE(lunout,*) 'get_aero 4 iyr_in=', iyr_in,' ',cyear
124
125	NULLIFY(pt_2)
126	! get_aero_fromfile returns pt_2 allocated and initialized with data for 12 month
127	! pt_2 has dimensions (klon, klev_src, 12)
128	CALL get_aero_fromfile(name_aero, cyear, filename, klev_src2, pt_ap, pt_b, p0, pt_2, psurf2, load2)
129	! Test for same number of vertical levels
130	IF (klev_src /= klev_src2) THEN
131	WRITE(lunout,*) 'Two aerosols files with different number of vertical levels is not allowded'
132	CALL abort_gcm('readaersosol','Error in number of vertical levels',1)
133	END IF
134
135	! Linare interpolate to the actual year:
136	DO it=1,12
137	DO k=1,klev_src
138	DO i = 1, klon
139	pt_out(i,k,it) = &
140	pt_out(i,k,it) - REAL(iyr_in-iyr1)/REAL(iyr2-iyr1) * &
141	(pt_out(i,k,it) - pt_2(i,k,it))
142	END DO
143	END DO
144
145	DO i = 1, klon
146	psurf(i,it) = &
147	psurf(i,it) - REAL(iyr_in-iyr1)/REAL(iyr2-iyr1) * &
148	(psurf(i,it) - psurf2(i,it))
149
150	load(i,it) = &
151	load(i,it) - REAL(iyr_in-iyr1)/REAL(iyr2-iyr1) * &
152	(load(i,it) - load2(i,it))
153	END DO
154	END DO
155
156	! Deallocate pt_2 no more needed
157	DEALLOCATE(pt_2)
158
159	END IF ! lonlyone
160	END IF ! iyr_in .LT. 1850
161
162	ELSE
163	WRITE(lunout,*)'This option is not implemented : aer_type = ', type,' name_aero=',name_aero
164	CALL abort_gcm('readaerosol','Error : aer_type parameter not accepted',1)
165	END IF ! type
166
167
168	END SUBROUTINE readaerosol
169
170
171	SUBROUTINE get_aero_fromfile(varname, cyr, filename, klev_src, pt_ap, pt_b, p0, pt_year, psurf_out, load_out)
172	!****************************************************************************************
173	! Read 12 month aerosol from file and distribute to local process on physical grid.
174	! Vertical levels, klev_src, may differ from model levels if new file format.
175	!
176	! For mpi_root and master thread :
177	! 1) Open file
178	! 2) Find vertical dimension klev_src
179	! 3) Read field month by month
180	! 4) Close file
181	! 5) Transform the global field from 2D(iim, jjp+1) to 1D(klon_glo)
182	! - Also the levels and the latitudes have to be inversed
183	!
184	! For all processes and threads :
185	! 6) Scatter global field(klon_glo) to local process domain(klon)
186	! 7) Test for negative values
187	!****************************************************************************************
188
189	USE netcdf
190	USE dimphy
191	USE mod_grid_phy_lmdz
192	USE mod_phys_lmdz_para
193	USE iophy, ONLY : io_lon, io_lat
194
195	IMPLICIT NONE
196
197	INCLUDE "dimensions.h"
198	INCLUDE "iniprint.h"
199
200	! Input argumets
201	CHARACTER(len=7), INTENT(IN) :: varname
202	CHARACTER(len=4), INTENT(IN) :: cyr
203	CHARACTER(len=8), INTENT(IN) :: filename
204
205	! Output arguments
206	INTEGER, INTENT(OUT) :: klev_src ! Number of vertical levels in file
207	REAL, POINTER, DIMENSION(:) :: pt_ap ! Pointer for describing the vertical levels
208	REAL, POINTER, DIMENSION(:) :: pt_b ! Pointer for describing the vertical levels
209	REAL :: p0 ! Reference pressure value
210	REAL, POINTER, DIMENSION(:,:,:) :: pt_year ! Pointer-variabale from file, 12 month, grid : klon,klev_src
211	REAL, DIMENSION(klon,12), INTENT(OUT) :: psurf_out ! Surface pression for 12 months
212	REAL, DIMENSION(klon,12), INTENT(OUT) :: load_out ! Aerosol mass load in each column
213	INTEGER :: nbr_tsteps ! number of month in file read
214
215	! Local variables
216	CHARACTER(len=30) :: fname
217	CHARACTER(len=30) :: cvar
218	INTEGER :: ncid, dimid, varid
219	INTEGER :: imth, i, j, k, ierr
220	REAL :: npole, spole
221	REAL, ALLOCATABLE, DIMENSION(:,:,:) :: varmth
222	REAL, ALLOCATABLE, DIMENSION(:,:,:,:) :: varyear ! Global variable read from file, 12 month
223	REAL, ALLOCATABLE, DIMENSION(:,:,:) :: varyear_glo1D !(klon_glo, klev_src, 12)
224	REAL, ALLOCATABLE, DIMENSION(:) :: varktmp
225
226	REAL, DIMENSION(iim,jjm+1,12) :: psurf_glo2D ! Surface pression for 12 months on dynamics global grid
227	REAL, DIMENSION(klon_glo,12) :: psurf_glo1D ! -"- on physical global grid
228	REAL, DIMENSION(iim,jjm+1,12) :: load_glo2D ! Load for 12 months on dynamics global grid
229	REAL, DIMENSION(klon_glo,12) :: load_glo1D ! -"- on physical global grid
230	REAL, DIMENSION(iim,jjm+1) :: vartmp
231	REAL, DIMENSION(iim) :: lon_src ! longitudes in file
232	REAL, DIMENSION(jjm+1) :: lat_src, lat_src_inv ! latitudes in file
233	LOGICAL :: new_file ! true if new file format detected
234	LOGICAL :: invert_lat ! true if the field has to be inverted for latitudes
235
236
237	! Deallocate pointers
238	IF (ASSOCIATED(pt_ap)) DEALLOCATE(pt_ap)
239	IF (ASSOCIATED(pt_b)) DEALLOCATE(pt_b)
240
241	IF (is_mpi_root .AND. is_omp_root) THEN
242
243	! 1) Open file
244	!****************************************************************************************
245	! Add suffix to filename
246	fname = trim(filename)//cyr//'.nc'
247
248	WRITE(lunout,*) 'reading variable ',TRIM(varname),' in file ', TRIM(fname)
249	CALL check_err( nf90_open(TRIM(fname), NF90_NOWRITE, ncid), "pb open "//trim(varname) )
250
251	! Test for equal longitudes and latitudes in file and model
252	!****************************************************************************************
253	! Read and test longitudes
254	CALL check_err( nf90_inq_varid(ncid, 'lon', varid),"pb inq lon" )
255	CALL check_err( nf90_get_var(ncid, varid, lon_src(:)),"pb get lon" )
256
257	IF (maxval(ABS(lon_src - io_lon)) > 0.001) THEN
258	WRITE(lunout,*) 'Problem in longitudes read from file : ',TRIM(fname)
259	WRITE(lunout,*) 'longitudes in file ', TRIM(fname),' : ', lon_src
260	WRITE(lunout,*) 'longitudes in model :', io_lon
261
262	CALL abort_gcm('get_aero_fromfile', 'longitudes are not the same in file and model',1)
263	END IF
264
265	! Read and test latitudes
266	CALL check_err( nf90_inq_varid(ncid, 'lat', varid),"pb inq lat" )
267	CALL check_err( nf90_get_var(ncid, varid, lat_src(:)),"pb get lat" )
268
269	! Invert source latitudes
270	DO j = 1, jjm+1
271	lat_src_inv(j) = lat_src(jjm+1 +1 -j)
272	END DO
273
274	IF (maxval(ABS(lat_src - io_lat)) < 0.001) THEN
275	! Latitudes are the same
276	invert_lat=.FALSE.
277	ELSE IF (maxval(ABS(lat_src_inv - io_lat)) < 0.001) THEN
278	! Inverted source latitudes correspond to model latitudes
279	WRITE(lunout,*) 'latitudes will be inverted for file : ',TRIM(fname)
280	invert_lat=.TRUE.
281	ELSE
282	WRITE(lunout,*) 'Problem in latitudes read from file : ',TRIM(fname)
283	WRITE(lunout,*) 'latitudes in file ', TRIM(fname),' : ', lat_src
284	WRITE(lunout,*) 'latitudes in model :', io_lat
285	CALL abort_gcm('get_aero_fromfile', 'latitudes do not correspond between file and model',1)
286	END IF
287
288
289	! 2) Check if old or new file is avalabale.
290	! New type of file should contain the dimension 'lev'
291	! Old type of file should contain the dimension 'PRESNIVS'
292	!****************************************************************************************
293	ierr = nf90_inq_dimid(ncid, 'lev', dimid)
294	IF (ierr /= NF90_NOERR) THEN
295	! Coordinate axe lev not found. Check for presnivs.
296	ierr = nf90_inq_dimid(ncid, 'PRESNIVS', dimid)
297	IF (ierr /= NF90_NOERR) THEN
298	! Dimension PRESNIVS not found either
299	CALL abort_gcm('get_aero_fromfile', 'dimension lev or presnivs not in file',1)
300	ELSE
301	! Old file found
302	new_file=.FALSE.
303	WRITE(lunout,*) 'Vertical interpolation for ',TRIM(varname),' will not be done'
304	END IF
305	ELSE
306	! New file found
307	new_file=.TRUE.
308	WRITE(lunout,*) 'Vertical interpolation for ',TRIM(varname),' will be done'
309	END IF
310
311	! 2) Find vertical dimension klev_src
312	!****************************************************************************************
313	CALL check_err( nf90_inquire_dimension(ncid, dimid, len = klev_src),"pb inq dim for PRESNIVS or lev" )
314
315	! Allocate variables depending on the number of vertical levels
316	ALLOCATE(varmth(iim, jjm+1, klev_src), varyear(iim, jjm+1, klev_src, 12), stat=ierr)
317	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 1',1)
318
319	ALLOCATE(pt_ap(klev_src), pt_b(klev_src), varktmp(klev_src), stat=ierr)
320	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 2',1)
321
322	! 3) Read all variables from file
323	! There is 2 options for the file structure :
324	! new_file=TRUE : read varyear, ps, pt_ap and pt_b
325	! new_file=FALSE : read varyear month by month
326	!****************************************************************************************
327
328	IF (new_file) THEN
329	! ++) Check number of month in file opened
330	!**************************************************************************************************
331	ierr = nf90_inq_dimid(ncid, 'TIME',dimid)
332	CALL check_err( nf90_inquire_dimension(ncid, dimid, len = nbr_tsteps),"pb inq dim TIME" )
333	! IF (nbr_tsteps /= 12 .AND. nbr_tsteps /= 14) THEN
334	IF (nbr_tsteps /= 12 ) THEN
335	CALL abort_gcm('get_aero_fromfile', 'not the right number of months in aerosol file read (should be 12 for the moment)',1)
336	ENDIF
337
338	! ++) Read the aerosol concentration month by month and concatenate to total variable varyear
339	!****************************************************************************************
340	! Get variable id
341	CALL check_err( nf90_inq_varid(ncid, TRIM(varname), varid),"pb inq var "//TRIM(varname) )
342
343	! Get the variable
344	CALL check_err( nf90_get_var(ncid, varid, varyear(:,:,:,:)),"pb get var "//TRIM(varname) )
345
346	! ++) Read surface pression, 12 month in one variable
347	!****************************************************************************************
348	! Get variable id
349	CALL check_err( nf90_inq_varid(ncid, "ps", varid),"pb inq var ps" )
350	! Get the variable
351	CALL check_err( nf90_get_var(ncid, varid, psurf_glo2D),"pb get var ps" )
352
353	! ++) Read mass load, 12 month in one variable
354	!****************************************************************************************
355	! Get variable id
356	CALL check_err( nf90_inq_varid(ncid, "load_"//TRIM(varname), varid) ,"pb inq var load_"//TRIM(varname))
357	! Get the variable
358	CALL check_err( nf90_get_var(ncid, varid, load_glo2D),"pb get var load_"//TRIM(varname) )
359
360	! ++) Read ap
361	!****************************************************************************************
362	! Get variable id
363	CALL check_err( nf90_inq_varid(ncid, "ap", varid),"pb inq var ap" )
364	! Get the variable
365	CALL check_err( nf90_get_var(ncid, varid, pt_ap),"pb get var ap" )
366
367	! ++) Read b
368	!****************************************************************************************
369	! Get variable id
370	CALL check_err( nf90_inq_varid(ncid, "b", varid),"pb inq var b" )
371	! Get the variable
372	CALL check_err( nf90_get_var(ncid, varid, pt_b),"pb get var b" )
373
374	! ++) Read p0 : reference pressure
375	!****************************************************************************************
376	! Get variable id
377	CALL check_err( nf90_inq_varid(ncid, "p0", varid),"pb inq var p0" )
378	! Get the variable
379	CALL check_err( nf90_get_var(ncid, varid, p0),"pb get var p0" )
380
381
382	ELSE ! old file
383
384	! ++) Read the aerosol concentration month by month and concatenate to total variable varyear
385	!****************************************************************************************
386	DO imth=1, 12
387	IF (imth.EQ.1) THEN
388	cvar=TRIM(varname)//'JAN'
389	ELSE IF (imth.EQ.2) THEN
390	cvar=TRIM(varname)//'FEB'
391	ELSE IF (imth.EQ.3) THEN
392	cvar=TRIM(varname)//'MAR'
393	ELSE IF (imth.EQ.4) THEN
394	cvar=TRIM(varname)//'APR'
395	ELSE IF (imth.EQ.5) THEN
396	cvar=TRIM(varname)//'MAY'
397	ELSE IF (imth.EQ.6) THEN
398	cvar=TRIM(varname)//'JUN'
399	ELSE IF (imth.EQ.7) THEN
400	cvar=TRIM(varname)//'JUL'
401	ELSE IF (imth.EQ.8) THEN
402	cvar=TRIM(varname)//'AUG'
403	ELSE IF (imth.EQ.9) THEN
404	cvar=TRIM(varname)//'SEP'
405	ELSE IF (imth.EQ.10) THEN
406	cvar=TRIM(varname)//'OCT'
407	ELSE IF (imth.EQ.11) THEN
408	cvar=TRIM(varname)//'NOV'
409	ELSE IF (imth.EQ.12) THEN
410	cvar=TRIM(varname)//'DEC'
411	END IF
412
413	! Get variable id
414	CALL check_err( nf90_inq_varid(ncid, TRIM(cvar), varid),"pb inq var "//TRIM(cvar) )
415
416	! Get the variable
417	CALL check_err( nf90_get_var(ncid, varid, varmth),"pb get var "//TRIM(cvar) )
418
419	! Store in variable for the whole year
420	varyear(:,:,:,imth)=varmth(:,:,:)
421
422	END DO
423
424	! Putting dummy
425	psurf_glo2D(:,:,:) = not_valid
426	load_glo2D(:,:,:) = not_valid
427	pt_ap(:) = not_valid
428	pt_b(:) = not_valid
429
430	END IF
431
432	! 4) Close file
433	!****************************************************************************************
434	CALL check_err( nf90_close(ncid),"pb in close" )
435
436
437	! 5) Transform the global field from 2D(iim, jjp+1) to 1D(klon_glo)
438	!****************************************************************************************
439	! Test if vertical levels have to be inversed
440
441	IF ((pt_b(1) < pt_b(klev_src)) .OR. .NOT. new_file) THEN
442	! WRITE(lunout,*) 'Vertical axis in file ',TRIM(fname), ' needs to be inverted'
443	! WRITE(lunout,*) 'before pt_ap = ', pt_ap
444	! WRITE(lunout,*) 'before pt_b = ', pt_b
445
446	! Inverse vertical levels for varyear
447	DO imth=1, 12
448	varmth(:,:,:) = varyear(:,:,:,imth) ! use varmth temporarly
449	DO k=1, klev_src
450	DO j=1, jjm+1
451	DO i=1,iim
452	varyear(i,j,k,imth) = varmth(i,j,klev_src+1-k)
453	END DO
454	END DO
455	END DO
456	END DO
457
458	! Inverte vertical axes for pt_ap and pt_b
459	varktmp(:) = pt_ap(:)
460	DO k=1, klev_src
461	pt_ap(k) = varktmp(klev_src+1-k)
462	END DO
463
464	varktmp(:) = pt_b(:)
465	DO k=1, klev_src
466	pt_b(k) = varktmp(klev_src+1-k)
467	END DO
468	WRITE(lunout,*) 'after pt_ap = ', pt_ap
469	WRITE(lunout,*) 'after pt_b = ', pt_b
470
471	ELSE
472	WRITE(lunout,*) 'Vertical axis in file ',TRIM(fname), ' is ok, no vertical inversion is done'
473	WRITE(lunout,*) 'pt_ap = ', pt_ap
474	WRITE(lunout,*) 'pt_b = ', pt_b
475	END IF
476
477	! - Invert latitudes if necessary
478	DO imth=1, 12
479	IF (invert_lat) THEN
480
481	! Invert latitudes for the variable
482	varmth(:,:,:) = varyear(:,:,:,imth) ! use varmth temporarly
483	DO k=1,klev_src
484	DO j=1,jjm+1
485	DO i=1,iim
486	varyear(i,j,k,imth) = varmth(i,jjm+1+1-j,k)
487	END DO
488	END DO
489	END DO
490
491	! Invert latitudes for surface pressure
492	vartmp(:,:) = psurf_glo2D(:,:,imth)
493	DO j=1, jjm+1
494	DO i=1,iim
495	psurf_glo2D(i,j,imth)= vartmp(i,jjm+1+1-j)
496	END DO
497	END DO
498
499	! Invert latitudes for the load
500	vartmp(:,:) = load_glo2D(:,:,imth)
501	DO j=1, jjm+1
502	DO i=1,iim
503	load_glo2D(i,j,imth)= vartmp(i,jjm+1+1-j)
504	END DO
505	END DO
506	END IF ! invert_lat
507
508	! Do zonal mead at poles and distribut at whole first and last latitude
509	DO k=1, klev_src
510	npole=0. ! North pole, j=1
511	spole=0. ! South pole, j=jjm+1
512	DO i=1,iim
513	npole = npole + varyear(i,1,k,imth)
514	spole = spole + varyear(i,jjm+1,k,imth)
515	END DO
516	npole = npole/REAL(iim)
517	spole = spole/REAL(iim)
518	varyear(:,1, k,imth) = npole
519	varyear(:,jjm+1,k,imth) = spole
520	END DO
521	END DO ! imth
522
523	ALLOCATE(varyear_glo1D(klon_glo, klev_src, 12), stat=ierr)
524	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 3',1)
525
526	! Transform from 2D to 1D field
527	CALL grid2Dto1D_glo(varyear,varyear_glo1D)
528	CALL grid2Dto1D_glo(psurf_glo2D,psurf_glo1D)
529	CALL grid2Dto1D_glo(load_glo2D,load_glo1D)
530
531	ELSE
532	ALLOCATE(varyear_glo1D(0,0,0))
533	END IF ! is_mpi_root .AND. is_omp_root
534
535	!$OMP BARRIER
536
537	! 6) Distribute to all processes
538	! Scatter global field(klon_glo) to local process domain(klon)
539	! and distribute klev_src to all processes
540	!****************************************************************************************
541
542	! Distribute klev_src
543	CALL bcast(klev_src)
544
545	! Allocate and distribute pt_ap and pt_b
546	IF (.NOT. ASSOCIATED(pt_ap)) THEN ! if pt_ap is allocated also pt_b is allocated
547	ALLOCATE(pt_ap(klev_src), pt_b(klev_src), stat=ierr)
548	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 4',1)
549	END IF
550	CALL bcast(pt_ap)
551	CALL bcast(pt_b)
552
553	! Allocate space for output pointer variable at local process
554	IF (ASSOCIATED(pt_year)) DEALLOCATE(pt_year)
555	ALLOCATE(pt_year(klon, klev_src, 12), stat=ierr)
556	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 5',1)
557
558	! Scatter global field to local domain at local process
559	CALL scatter(varyear_glo1D, pt_year)
560	CALL scatter(psurf_glo1D, psurf_out)
561	CALL scatter(load_glo1D, load_out)
562
563	! 7) Test for negative values
564	!****************************************************************************************
565	IF (MINVAL(pt_year) < 0.) THEN
566	WRITE(lunout,*) 'Warning! Negative values read from file :', fname
567	END IF
568
569	END SUBROUTINE get_aero_fromfile
570
571
572	SUBROUTINE check_err(status,text)
573	USE netcdf
574	IMPLICIT NONE
575
576	INCLUDE "iniprint.h"
577	INTEGER, INTENT (IN) :: status
578	CHARACTER(len=*), INTENT (IN), OPTIONAL :: text
579
580	IF (status /= NF90_NOERR) THEN
581	WRITE(lunout,*) 'Error in get_aero_fromfile, netcdf error code = ',status
582	IF (PRESENT(text)) THEN
583	WRITE(lunout,*) 'Error in get_aero_fromfile : ',text
584	END IF
585	CALL abort_gcm('get_aero_fromfile',trim(nf90_strerror(status)),1)
586	END IF
587
588	END SUBROUTINE check_err
589
590
591	END MODULE readaerosol_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format