Context Navigation

radlwsw_m.F90 @ 1687

Last change on this file since 1687 was 1687, checked in by Laurent Fairhead, 11 years ago

Nettoyage général pour la bonne marche de makegcm
FH

General housekeeping for makegcm to work as expected
FH

File size: 18.4 KB

Line
1	module radlwsw_m
2
3	IMPLICIT NONE
4
5	contains
6
7	SUBROUTINE radlwsw( &
8	dist, rmu0, fract, &
9	paprs, pplay,tsol,alb1, alb2, &
10	t,q,wo,&
11	cldfra, cldemi, cldtaupd,&
12	ok_ade, ok_aie, flag_aerosol,&
13	tau_aero, piz_aero, cg_aero,&
14	cldtaupi, new_aod, &
15	qsat, flwc, fiwc, &
16	heat,heat0,cool,cool0,radsol,albpla,&
17	topsw,toplw,solsw,sollw,&
18	sollwdown,&
19	topsw0,toplw0,solsw0,sollw0,&
20	lwdn0, lwdn, lwup0, lwup,&
21	swdn0, swdn, swup0, swup,&
22	topswad_aero, solswad_aero,&
23	topswai_aero, solswai_aero, &
24	topswad0_aero, solswad0_aero,&
25	topsw_aero, topsw0_aero,&
26	solsw_aero, solsw0_aero, &
27	topswcf_aero, solswcf_aero)
28
29
30
31	USE DIMPHY
32	USE assert_m, ONLY : assert
33	USE infotrac, ONLY : type_trac
34	#ifdef REPROBUS
35	USE CHEM_REP, ONLY : solaireTIME, ok_SUNTIME, ndimozon
36	#endif
37
38	!======================================================================
39	! Auteur(s): Z.X. Li (LMD/CNRS) date: 19960719
40	! Objet: interface entre le modele et les rayonnements
41	! Arguments:
42	! dist-----input-R- distance astronomique terre-soleil
43	! rmu0-----input-R- cosinus de l'angle zenithal
44	! fract----input-R- duree d'ensoleillement normalisee
45	! co2_ppm--input-R- concentration du gaz carbonique (en ppm)
46	! paprs----input-R- pression a inter-couche (Pa)
47	! pplay----input-R- pression au milieu de couche (Pa)
48	! tsol-----input-R- temperature du sol (en K)
49	! alb1-----input-R- albedo du sol(entre 0 et 1) dans l'interval visible
50	! alb2-----input-R- albedo du sol(entre 0 et 1) dans l'interval proche infra-rouge
51	! t--------input-R- temperature (K)
52	! q--------input-R- vapeur d'eau (en kg/kg)
53	! cldfra---input-R- fraction nuageuse (entre 0 et 1)
54	! cldtaupd---input-R- epaisseur optique des nuages dans le visible (present-day value)
55	! cldemi---input-R- emissivite des nuages dans l'IR (entre 0 et 1)
56	! ok_ade---input-L- apply the Aerosol Direct Effect or not?
57	! ok_aie---input-L- apply the Aerosol Indirect Effect or not?
58	! flag_aerosol-input-I- aerosol flag from 0 to 6
59	! tau_ae, piz_ae, cg_ae-input-R- aerosol optical properties (calculated in aeropt.F)
60	! cldtaupi-input-R- epaisseur optique des nuages dans le visible
61	! calculated for pre-industrial (pi) aerosol concentrations, i.e. with smaller
62	! droplet concentration, thus larger droplets, thus generally cdltaupi cldtaupd
63	! it is needed for the diagnostics of the aerosol indirect radiative forcing
64	!
65	! heat-----output-R- echauffement atmospherique (visible) (K/jour)
66	! cool-----output-R- refroidissement dans l'IR (K/jour)
67	! radsol---output-R- bilan radiatif net au sol (W/m**2) (+ vers le bas)
68	! albpla---output-R- albedo planetaire (entre 0 et 1)
69	! topsw----output-R- flux solaire net au sommet de l'atm.
70	! toplw----output-R- ray. IR montant au sommet de l'atmosphere
71	! solsw----output-R- flux solaire net a la surface
72	! sollw----output-R- ray. IR montant a la surface
73	! solswad---output-R- ray. solaire net absorbe a la surface (aerosol dir)
74	! topswad---output-R- ray. solaire absorbe au sommet de l'atm. (aerosol dir)
75	! solswai---output-R- ray. solaire net absorbe a la surface (aerosol ind)
76	! topswai---output-R- ray. solaire absorbe au sommet de l'atm. (aerosol ind)
77	!
78	! ATTENTION: swai and swad have to be interpreted in the following manner:
79	! ---------
80	! ok_ade=F & ok_aie=F -both are zero
81	! ok_ade=T & ok_aie=F -aerosol direct forcing is F_{AD} = topsw-topswad
82	! indirect is zero
83	! ok_ade=F & ok_aie=T -aerosol indirect forcing is F_{AI} = topsw-topswai
84	! direct is zero
85	! ok_ade=T & ok_aie=T -aerosol indirect forcing is F_{AI} = topsw-topswai
86	! aerosol direct forcing is F_{AD} = topswai-topswad
87	!
88
89	!======================================================================
90
91	! ====================================================================
92	! Adapte au modele de chimie INCA par Celine Deandreis & Anne Cozic -- 2009
93	! 1 = ZERO
94	! 2 = AER total
95	! 3 = NAT
96	! 4 = BC
97	! 5 = SO4
98	! 6 = POM
99	! 7 = DUST
100	! 8 = SS
101	! 9 = NO3
102	!
103	! ====================================================================
104	include "YOETHF.h"
105	include "YOMCST.h"
106	include "clesphys.h"
107	include "iniprint.h"
108
109	! Input arguments
110	REAL, INTENT(in) :: dist
111	REAL, INTENT(in) :: rmu0(KLON), fract(KLON)
112	REAL, INTENT(in) :: paprs(KLON,KLEV+1), pplay(KLON,KLEV)
113	REAL, INTENT(in) :: alb1(KLON), alb2(KLON), tsol(KLON)
114	REAL, INTENT(in) :: t(KLON,KLEV), q(KLON,KLEV)
115
116	REAL, INTENT(in):: wo(:, :, :) ! dimension(KLON,KLEV, 1 or 2)
117	! column-density of ozone in a layer, in kilo-Dobsons
118	! "wo(:, :, 1)" is for the average day-night field,
119	! "wo(:, :, 2)" is for daylight time.
120
121	LOGICAL, INTENT(in) :: ok_ade, ok_aie ! switches whether to use aerosol direct (indirect) effects or not
122	INTEGER, INTENT(in) :: flag_aerosol ! takes value 0 (no aerosol) or 1 to 6 (aerosols)
123	REAL, INTENT(in) :: cldfra(KLON,KLEV), cldemi(KLON,KLEV), cldtaupd(KLON,KLEV)
124	REAL, INTENT(in) :: tau_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
125	REAL, INTENT(in) :: piz_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
126	REAL, INTENT(in) :: cg_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
127	REAL, INTENT(in) :: cldtaupi(KLON,KLEV) ! cloud optical thickness for pre-industrial aerosol concentrations
128	LOGICAL, INTENT(in) :: new_aod ! flag pour retrouver les resultats exacts de l'AR4 dans le cas ou l'on ne travaille qu'avec les sulfates
129	REAL, INTENT(in) :: qsat(klon,klev) ! Variable pour iflag_rrtm=1
130	REAL, INTENT(in) :: flwc(klon,klev) ! Variable pour iflag_rrtm=1
131	REAL, INTENT(in) :: fiwc(klon,klev) ! Variable pour iflag_rrtm=1
132
133	! Output arguments
134	REAL, INTENT(out) :: heat(KLON,KLEV), cool(KLON,KLEV)
135	REAL, INTENT(out) :: heat0(KLON,KLEV), cool0(KLON,KLEV)
136	REAL, INTENT(out) :: radsol(KLON), topsw(KLON), toplw(KLON)
137	REAL, INTENT(out) :: solsw(KLON), sollw(KLON), albpla(KLON)
138	REAL, INTENT(out) :: topsw0(KLON), toplw0(KLON), solsw0(KLON), sollw0(KLON)
139	REAL, INTENT(out) :: sollwdown(KLON)
140	REAL, INTENT(out) :: swdn(KLON,kflev+1),swdn0(KLON,kflev+1)
141	REAL, INTENT(out) :: swup(KLON,kflev+1),swup0(KLON,kflev+1)
142	REAL, INTENT(out) :: lwdn(KLON,kflev+1),lwdn0(KLON,kflev+1)
143	REAL, INTENT(out) :: lwup(KLON,kflev+1),lwup0(KLON,kflev+1)
144	REAL, INTENT(out) :: topswad_aero(KLON), solswad_aero(KLON) ! output: aerosol direct forcing at TOA and surface
145	REAL, INTENT(out) :: topswai_aero(KLON), solswai_aero(KLON) ! output: aerosol indirect forcing atTOA and surface
146	REAL, DIMENSION(klon), INTENT(out) :: topswad0_aero
147	REAL, DIMENSION(klon), INTENT(out) :: solswad0_aero
148	REAL, DIMENSION(kdlon,9), INTENT(out) :: topsw_aero
149	REAL, DIMENSION(kdlon,9), INTENT(out) :: topsw0_aero
150	REAL, DIMENSION(kdlon,9), INTENT(out) :: solsw_aero
151	REAL, DIMENSION(kdlon,9), INTENT(out) :: solsw0_aero
152	REAL, DIMENSION(kdlon,3), INTENT(out) :: topswcf_aero
153	REAL, DIMENSION(kdlon,3), INTENT(out) :: solswcf_aero
154
155	! Local variables
156	REAL(KIND=8) ZFSUP(KDLON,KFLEV+1)
157	REAL(KIND=8) ZFSDN(KDLON,KFLEV+1)
158	REAL(KIND=8) ZFSUP0(KDLON,KFLEV+1)
159	REAL(KIND=8) ZFSDN0(KDLON,KFLEV+1)
160	REAL(KIND=8) ZFLUP(KDLON,KFLEV+1)
161	REAL(KIND=8) ZFLDN(KDLON,KFLEV+1)
162	REAL(KIND=8) ZFLUP0(KDLON,KFLEV+1)
163	REAL(KIND=8) ZFLDN0(KDLON,KFLEV+1)
164	REAL(KIND=8) zx_alpha1, zx_alpha2
165	INTEGER k, kk, i, j, iof, nb_gr
166	REAL(KIND=8) PSCT
167	REAL(KIND=8) PALBD(kdlon,2), PALBP(kdlon,2)
168	REAL(KIND=8) PEMIS(kdlon), PDT0(kdlon), PVIEW(kdlon)
169	REAL(KIND=8) PPSOL(kdlon), PDP(kdlon,KLEV)
170	REAL(KIND=8) PTL(kdlon,kflev+1), PPMB(kdlon,kflev+1)
171	REAL(KIND=8) PTAVE(kdlon,kflev)
172	REAL(KIND=8) PWV(kdlon,kflev), PQS(kdlon,kflev)
173
174	real(kind=8) POZON(kdlon, kflev, size(wo, 3)) ! mass fraction of ozone
175	! "POZON(:, :, 1)" is for the average day-night field,
176	! "POZON(:, :, 2)" is for daylight time.
177
178	REAL(KIND=8) PAER(kdlon,kflev,5)
179	REAL(KIND=8) PCLDLD(kdlon,kflev)
180	REAL(KIND=8) PCLDLU(kdlon,kflev)
181	REAL(KIND=8) PCLDSW(kdlon,kflev)
182	REAL(KIND=8) PTAU(kdlon,2,kflev)
183	REAL(KIND=8) POMEGA(kdlon,2,kflev)
184	REAL(KIND=8) PCG(kdlon,2,kflev)
185	REAL(KIND=8) zfract(kdlon), zrmu0(kdlon), zdist
186	REAL(KIND=8) zheat(kdlon,kflev), zcool(kdlon,kflev)
187	REAL(KIND=8) zheat0(kdlon,kflev), zcool0(kdlon,kflev)
188	REAL(KIND=8) ztopsw(kdlon), ztoplw(kdlon)
189	REAL(KIND=8) zsolsw(kdlon), zsollw(kdlon), zalbpla(kdlon)
190	REAL(KIND=8) zsollwdown(kdlon)
191	REAL(KIND=8) ztopsw0(kdlon), ztoplw0(kdlon)
192	REAL(KIND=8) zsolsw0(kdlon), zsollw0(kdlon)
193	REAL(KIND=8) zznormcp
194	REAL(KIND=8) tauaero(kdlon,kflev,9,2) ! aer opt properties
195	REAL(KIND=8) pizaero(kdlon,kflev,9,2)
196	REAL(KIND=8) cgaero(kdlon,kflev,9,2)
197	REAL(KIND=8) PTAUA(kdlon,2,kflev) ! present-day value of cloud opt thickness (PTAU is pre-industrial value), local use
198	REAL(KIND=8) POMEGAA(kdlon,2,kflev) ! dito for single scatt albedo
199	REAL(KIND=8) ztopswadaero(kdlon), zsolswadaero(kdlon) ! Aerosol direct forcing at TOAand surface
200	REAL(KIND=8) ztopswad0aero(kdlon), zsolswad0aero(kdlon) ! Aerosol direct forcing at TOAand surface
201	REAL(KIND=8) ztopswaiaero(kdlon), zsolswaiaero(kdlon) ! dito, indirect
202	REAL(KIND=8) ztopsw_aero(kdlon,9), ztopsw0_aero(kdlon,9)
203	REAL(KIND=8) zsolsw_aero(kdlon,9), zsolsw0_aero(kdlon,9)
204	REAL(KIND=8) ztopswcf_aero(kdlon,3), zsolswcf_aero(kdlon,3)
205	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
206
207	call assert(size(wo, 1) == klon, size(wo, 2) == klev, "radlwsw wo")
208	! initialisation
209	tauaero(:,:,:,:)=0.
210	pizaero(:,:,:,:)=0.
211	cgaero(:,:,:,:)=0.
212
213	!
214	!-------------------------------------------
215	nb_gr = KLON / kdlon
216	IF (nb_gr*kdlon .NE. KLON) THEN
217	PRINT*, "kdlon mauvais:", KLON, kdlon, nb_gr
218	CALL abort
219	ENDIF
220	IF (kflev .NE. KLEV) THEN
221	PRINT*, "kflev differe de KLEV, kflev, KLEV"
222	CALL abort
223	ENDIF
224	!-------------------------------------------
225	DO k = 1, KLEV
226	DO i = 1, KLON
227	heat(i,k)=0.
228	cool(i,k)=0.
229	heat0(i,k)=0.
230	cool0(i,k)=0.
231	ENDDO
232	ENDDO
233	!
234	zdist = dist
235	!
236	PSCT = solaire/zdist/zdist
237
238	IF (type_trac == 'repr') THEN
239	#ifdef REPROBUS
240	if(ok_SUNTIME) PSCT = solaireTIME/zdist/zdist
241	print,'Constante solaire: ',PSCTzdist*zdist
242	#endif
243	END IF
244
245	DO j = 1, nb_gr
246	iof = kdlon*(j-1)
247	DO i = 1, kdlon
248	zfract(i) = fract(iof+i)
249	zrmu0(i) = rmu0(iof+i)
250	PALBD(i,1) = alb1(iof+i)
251	PALBD(i,2) = alb2(iof+i)
252	PALBP(i,1) = alb1(iof+i)
253	PALBP(i,2) = alb2(iof+i)
254	PEMIS(i) = 1.0
255	PVIEW(i) = 1.66
256	PPSOL(i) = paprs(iof+i,1)
257	zx_alpha1 = (paprs(iof+i,1)-pplay(iof+i,2))/(pplay(iof+i,1)-pplay(iof+i,2))
258	zx_alpha2 = 1.0 - zx_alpha1
259	PTL(i,1) = t(iof+i,1) * zx_alpha1 + t(iof+i,2) * zx_alpha2
260	PTL(i,KLEV+1) = t(iof+i,KLEV)
261	PDT0(i) = tsol(iof+i) - PTL(i,1)
262	ENDDO
263	DO k = 2, kflev
264	DO i = 1, kdlon
265	PTL(i,k) = (t(iof+i,k)+t(iof+i,k-1))*0.5
266	ENDDO
267	ENDDO
268	DO k = 1, kflev
269	DO i = 1, kdlon
270	PDP(i,k) = paprs(iof+i,k)-paprs(iof+i,k+1)
271	PTAVE(i,k) = t(iof+i,k)
272	PWV(i,k) = MAX (q(iof+i,k), 1.0e-12)
273	PQS(i,k) = PWV(i,k)
274	POZON(i,k, :) = wo(iof+i, k, :) * RG * dobson_u * 1e3 &
275	/ (paprs(iof+i, k) - paprs(iof+i, k+1))
276	PCLDLD(i,k) = cldfra(iof+i,k)*cldemi(iof+i,k)
277	PCLDLU(i,k) = cldfra(iof+i,k)*cldemi(iof+i,k)
278	PCLDSW(i,k) = cldfra(iof+i,k)
279	PTAU(i,1,k) = MAX(cldtaupi(iof+i,k), 1.0e-05)! 1e-12 serait instable
280	PTAU(i,2,k) = MAX(cldtaupi(iof+i,k), 1.0e-05)! pour 32-bit machines
281	POMEGA(i,1,k) = 0.9999 - 5.0e-04 * EXP(-0.5 * PTAU(i,1,k))
282	POMEGA(i,2,k) = 0.9988 - 2.5e-03 * EXP(-0.05 * PTAU(i,2,k))
283	PCG(i,1,k) = 0.865
284	PCG(i,2,k) = 0.910
285	!-
286	! Introduced for aerosol indirect forcings.
287	! The following values use the cloud optical thickness calculated from
288	! present-day aerosol concentrations whereas the quantities without the
289	! "A" at the end are for pre-industial (natural-only) aerosol concentrations
290	!
291	PTAUA(i,1,k) = MAX(cldtaupd(iof+i,k), 1.0e-05)! 1e-12 serait instable
292	PTAUA(i,2,k) = MAX(cldtaupd(iof+i,k), 1.0e-05)! pour 32-bit machines
293	POMEGAA(i,1,k) = 0.9999 - 5.0e-04 * EXP(-0.5 * PTAUA(i,1,k))
294	POMEGAA(i,2,k) = 0.9988 - 2.5e-03 * EXP(-0.05 * PTAUA(i,2,k))
295	ENDDO
296	ENDDO
297
298	IF (type_trac == 'repr') THEN
299	#ifdef REPROBUS
300	ndimozon = size(wo, 3)
301	CALL RAD_INTERACTIF(POZON,iof)
302	#endif
303	END IF
304
305	!
306	DO k = 1, kflev+1
307	DO i = 1, kdlon
308	PPMB(i,k) = paprs(iof+i,k)/100.0
309	ENDDO
310	ENDDO
311	!
312	DO kk = 1, 5
313	DO k = 1, kflev
314	DO i = 1, kdlon
315	PAER(i,k,kk) = 1.0E-15
316	ENDDO
317	ENDDO
318	ENDDO
319	DO k = 1, kflev
320	DO i = 1, kdlon
321	tauaero(i,k,:,1)=tau_aero(iof+i,k,:,1)
322	pizaero(i,k,:,1)=piz_aero(iof+i,k,:,1)
323	cgaero(i,k,:,1) =cg_aero(iof+i,k,:,1)
324	tauaero(i,k,:,2)=tau_aero(iof+i,k,:,2)
325	pizaero(i,k,:,2)=piz_aero(iof+i,k,:,2)
326	cgaero(i,k,:,2) =cg_aero(iof+i,k,:,2)
327	ENDDO
328	ENDDO
329
330	!
331	!===== iflag_rrtm ================================================
332	!
333	IF (iflag_rrtm == 0) THEN
334	! Old radiation scheme, used for AR4 runs
335	! average day-night ozone for longwave
336	CALL LW_LMDAR4(&
337	PPMB, PDP,&
338	PPSOL,PDT0,PEMIS,&
339	PTL, PTAVE, PWV, POZON(:, :, 1), PAER,&
340	PCLDLD,PCLDLU,&
341	PVIEW,&
342	zcool, zcool0,&
343	ztoplw,zsollw,ztoplw0,zsollw0,&
344	zsollwdown,&
345	ZFLUP, ZFLDN, ZFLUP0,ZFLDN0)
346
347	! daylight ozone, if we have it, for short wave
348	IF (.NOT. new_aod) THEN
349	! use old version
350	CALL SW_LMDAR4(PSCT, zrmu0, zfract,&
351	PPMB, PDP, &
352	PPSOL, PALBD, PALBP,&
353	PTAVE, PWV, PQS, POZON(:, :, size(wo, 3)), PAER,&
354	PCLDSW, PTAU, POMEGA, PCG,&
355	zheat, zheat0,&
356	zalbpla,ztopsw,zsolsw,ztopsw0,zsolsw0,&
357	ZFSUP,ZFSDN,ZFSUP0,ZFSDN0,&
358	tauaero(:,:,5,:), pizaero(:,:,5,:), cgaero(:,:,5,:),&
359	PTAUA, POMEGAA,&
360	ztopswadaero,zsolswadaero,&
361	ztopswaiaero,zsolswaiaero,&
362	ok_ade, ok_aie, flag_aerosol)
363
364	ELSE ! new_aod=T
365	CALL SW_AEROAR4(PSCT, zrmu0, zfract,&
366	PPMB, PDP,&
367	PPSOL, PALBD, PALBP,&
368	PTAVE, PWV, PQS, POZON(:, :, size(wo, 3)), PAER,&
369	PCLDSW, PTAU, POMEGA, PCG,&
370	zheat, zheat0,&
371	zalbpla,ztopsw,zsolsw,ztopsw0,zsolsw0,&
372	ZFSUP,ZFSDN,ZFSUP0,ZFSDN0,&
373	tauaero, pizaero, cgaero, &
374	PTAUA, POMEGAA,&
375	ztopswadaero,zsolswadaero,&
376	ztopswad0aero,zsolswad0aero,&
377	ztopswaiaero,zsolswaiaero, &
378	ztopsw_aero,ztopsw0_aero,&
379	zsolsw_aero,zsolsw0_aero,&
380	ztopswcf_aero,zsolswcf_aero, &
381	ok_ade, ok_aie, flag_aerosol)
382	ENDIF
383
384	ELSE
385	!===== iflag_rrtm=1, on passe dans SW via RECMWFL ===============
386	WRITE(lunout,*) "Option iflag_rrtm=T ne fonctionne pas encore !!!"
387	CALL abort_gcm('radlwsw','iflag_rrtm=T not valid',1)
388
389	ENDIF ! iflag_rrtm
390	!======================================================================
391
392	DO i = 1, kdlon
393	radsol(iof+i) = zsolsw(i) + zsollw(i)
394	topsw(iof+i) = ztopsw(i)
395	toplw(iof+i) = ztoplw(i)
396	solsw(iof+i) = zsolsw(i)
397	sollw(iof+i) = zsollw(i)
398	sollwdown(iof+i) = zsollwdown(i)
399	DO k = 1, kflev+1
400	lwdn0 ( iof+i,k) = ZFLDN0 ( i,k)
401	lwdn ( iof+i,k) = ZFLDN ( i,k)
402	lwup0 ( iof+i,k) = ZFLUP0 ( i,k)
403	lwup ( iof+i,k) = ZFLUP ( i,k)
404	ENDDO
405	topsw0(iof+i) = ztopsw0(i)
406	toplw0(iof+i) = ztoplw0(i)
407	solsw0(iof+i) = zsolsw0(i)
408	sollw0(iof+i) = zsollw0(i)
409	albpla(iof+i) = zalbpla(i)
410
411	DO k = 1, kflev+1
412	swdn0 ( iof+i,k) = ZFSDN0 ( i,k)
413	swdn ( iof+i,k) = ZFSDN ( i,k)
414	swup0 ( iof+i,k) = ZFSUP0 ( i,k)
415	swup ( iof+i,k) = ZFSUP ( i,k)
416	ENDDO
417	ENDDO
418	!-transform the aerosol forcings, if they have
419	! to be calculated
420	IF (ok_ade) THEN
421	DO i = 1, kdlon
422	topswad_aero(iof+i) = ztopswadaero(i)
423	topswad0_aero(iof+i) = ztopswad0aero(i)
424	solswad_aero(iof+i) = zsolswadaero(i)
425	solswad0_aero(iof+i) = zsolswad0aero(i)
426	! MS the following lines seem to be wrong, why is iof on right hand side???
427	! topsw_aero(iof+i,:) = ztopsw_aero(iof+i,:)
428	! topsw0_aero(iof+i,:) = ztopsw0_aero(iof+i,:)
429	! solsw_aero(iof+i,:) = zsolsw_aero(iof+i,:)
430	! solsw0_aero(iof+i,:) = zsolsw0_aero(iof+i,:)
431	topsw_aero(iof+i,:) = ztopsw_aero(i,:)
432	topsw0_aero(iof+i,:) = ztopsw0_aero(i,:)
433	solsw_aero(iof+i,:) = zsolsw_aero(i,:)
434	solsw0_aero(iof+i,:) = zsolsw0_aero(i,:)
435	topswcf_aero(iof+i,:) = ztopswcf_aero(i,:)
436	solswcf_aero(iof+i,:) = zsolswcf_aero(i,:)
437	ENDDO
438	ELSE
439	DO i = 1, kdlon
440	topswad_aero(iof+i) = 0.0
441	solswad_aero(iof+i) = 0.0
442	topswad0_aero(iof+i) = 0.0
443	solswad0_aero(iof+i) = 0.0
444	topsw_aero(iof+i,:) = 0.
445	topsw0_aero(iof+i,:) =0.
446	solsw_aero(iof+i,:) = 0.
447	solsw0_aero(iof+i,:) = 0.
448	ENDDO
449	ENDIF
450	IF (ok_aie) THEN
451	DO i = 1, kdlon
452	topswai_aero(iof+i) = ztopswaiaero(i)
453	solswai_aero(iof+i) = zsolswaiaero(i)
454	ENDDO
455	ELSE
456	DO i = 1, kdlon
457	topswai_aero(iof+i) = 0.0
458	solswai_aero(iof+i) = 0.0
459	ENDDO
460	ENDIF
461	DO k = 1, kflev
462	DO i = 1, kdlon
463	! scale factor to take into account the difference between
464	! dry air and watter vapour scpecifi! heat capacity
465	zznormcp=1.0+RVTMP2*PWV(i,k)
466	heat(iof+i,k) = zheat(i,k)/zznormcp
467	cool(iof+i,k) = zcool(i,k)/zznormcp
468	heat0(iof+i,k) = zheat0(i,k)/zznormcp
469	cool0(iof+i,k) = zcool0(i,k)/zznormcp
470	ENDDO
471	ENDDO
472
473	ENDDO ! j = 1, nb_gr
474
475	END SUBROUTINE radlwsw
476
477	end module radlwsw_m

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format