source: LMDZ5/trunk/libf/phylmd/phys_output_mod.F90 @ 1968

Last change on this file since 1968 was 1937, checked in by lguez, 11 years ago

Added test on ipos. Program could crash because of a bad value of phys_out_filetimesteps, with an unclear message.

  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 22.8 KB
RevLine 
[1279]1! $Id: phys_output_mod.F90 1937 2014-01-20 15:31:20Z fhourdin $
2!
[1813]3
4MODULE phys_output_mod
5  USE indice_sol_mod
6  USE phys_output_var_mod
7  USE aero_mod, only : naero_spc,name_aero
8  USE phys_output_write_mod, ONLY : phys_output_write
[1920]9  REAL, DIMENSION(nfiles),SAVE :: ecrit_files
[1813]10
[907]11! Abderrahmane 12 2007
12!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
13!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
14! histmth.nc : moyennes mensuelles
15! histday.nc : moyennes journalieres
16! histhf.nc  : moyennes toutes les 3 heures
17! histins.nc : valeurs instantanees
18!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
19
[1562]20CONTAINS
[907]21
22!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
23!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
[1562]24  !! histbeg, histvert et histdef
[907]25!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1562]26
[1539]27  SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
[1828]28       jjmp1,nlevSTD,clevSTD,rlevSTD,nbteta, &
[1539]29       ctetaSTD, dtime, ok_veget, &
[1279]30       type_ocean, iflag_pbl,ok_mensuel,ok_journe, &
31       ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
[1539]32       phys_out_filestations, &
[1807]33       new_aod, aerosol_couple, flag_aerosol_strat, &
34       pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
35       d_t, qx, d_qx, zmasse, ok_sync)   
[907]36
[1562]37    USE iophy
38    USE dimphy
39    USE infotrac
40    USE ioipsl
[1742]41    USE phys_cal_mod, only : hour
[1562]42    USE mod_phys_lmdz_para
43    USE aero_mod, only : naero_spc,name_aero
[1865]44        !Martin
45    USE surface_data, ONLY : ok_snow
[1807]46    USE phys_output_ctrlout_mod
[1912]47    USE mod_grid_phy_lmdz, only: klon_glo
[907]48
[1825]49#ifdef CPP_XIOS
50    ! ug Pour les sorties XIOS
51    USE wxios
52#endif
53
[1562]54    IMPLICIT NONE
55    include "dimensions.h"
56    include "temps.h"
57    include "clesphys.h"
58    include "thermcell.h"
59    include "comvert.h"
[1575]60    include "iniprint.h"
[907]61
[1807]62    ! ug Nouveaux arguments nécessaires au histwrite_mod:
63    INTEGER, INTENT(IN)                         :: ivap
64    INTEGER, DIMENSION(klon), INTENT(IN)        :: lmax_th
65    LOGICAL, INTENT(IN)                         :: ok_sync
66    LOGICAL, DIMENSION(klon, klev), INTENT(IN)  :: ptconv, ptconvth
67    REAL, INTENT(IN)                            :: pdtphys
68    REAL, DIMENSION(klon), INTENT(IN)           :: pphis
69    REAL, DIMENSION(klon, klev), INTENT(IN)     :: pplay, d_t
70    REAL, DIMENSION(klon, klev+1), INTENT(IN)   :: paprs
71    REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
72    REAL, DIMENSION(klon, llm), INTENT(IN)      :: zmasse
73
74
75    REAL,DIMENSION(klon),INTENT(IN) :: rlon
76    REAL,DIMENSION(klon),INTENT(IN) :: rlat
77    INTEGER, INTENT(IN)             :: pim
[1539]78    INTEGER, DIMENSION(pim)            :: tabij
[1807]79    INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
80    REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
81    REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
[1539]82
[1791]83    INTEGER                               :: jjmp1
84    INTEGER                               :: nbteta, nlevSTD, radpas
85    LOGICAL                               :: ok_mensuel, ok_journe, ok_hf, ok_instan
86    LOGICAL                               :: ok_LES,ok_ade,ok_aie,flag_aerosol_strat
87    LOGICAL                               :: new_aod, aerosol_couple
[1807]88    INTEGER, INTENT(IN)::  read_climoz ! read ozone climatology
[1562]89    !     Allowed values are 0, 1 and 2
90    !     0: do not read an ozone climatology
91    !     1: read a single ozone climatology that will be used day and night
92    !     2: read two ozone climatologies, the average day and night
93    !     climatology and the daylight climatology
[1279]94
[1791]95    REAL                                  :: dtime
96    INTEGER                               :: idayref
97    REAL                                  :: zjulian
98    REAL, DIMENSION(klev)                 :: Ahyb, Bhyb, Alt
99    CHARACTER(LEN=4), DIMENSION(nlevSTD)  :: clevSTD
[1828]100    REAL, DIMENSION(nlevSTD)              :: rlevSTD
[1791]101    INTEGER                               :: nsrf, k, iq, iiq, iff, i, j, ilev
102    INTEGER                               :: naero
103    LOGICAL                               :: ok_veget
104    INTEGER                               :: iflag_pbl
105    CHARACTER(LEN=4)                      :: bb2
106    CHARACTER(LEN=2)                      :: bb3
107    CHARACTER(LEN=6)                      :: type_ocean
108    CHARACTER(LEN=3)                      :: ctetaSTD(nbteta)
109    INTEGER, DIMENSION(iim*jjmp1)         ::  ndex2d
110    INTEGER, DIMENSION(iim*jjmp1*klev)    :: ndex3d
111    INTEGER                               :: imin_ins, imax_ins
112    INTEGER                               :: jmin_ins, jmax_ins
113    INTEGER, DIMENSION(nfiles)            :: phys_out_levmin, phys_out_levmax
114    INTEGER, DIMENSION(nfiles)            :: phys_out_filelevels
[1884]115    CHARACTER(LEN=20), DIMENSION(nfiles)  :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
116                                                             'Default', 'Default', 'Default', 'Default' /)
[1791]117    LOGICAL, DIMENSION(nfiles)            :: phys_out_filekeys
118    LOGICAL, DIMENSION(nfiles)            :: phys_out_filestations
[907]119
[1065]120!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1562]121    !                 entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
[1054]122
[1828]123    LOGICAL, DIMENSION(nfiles), SAVE  :: phys_out_regfkey       = (/ .FALSE., .FALSE., .FALSE.,  .FALSE., &
124                                                                    .FALSE., .FALSE., .FALSE., .FALSE.,  .FALSE. /)
125    REAL, DIMENSION(nfiles), SAVE     :: phys_out_lonmin        = (/   -180.,   -180.,   -180.,    -180., &
126                                                                     -180.,   -180., -180.,   -180.,    -180. /)
127    REAL, DIMENSION(nfiles), SAVE     :: phys_out_lonmax        = (/    180.,    180.,    180.,     180., &
128                                                                      180.,    180., 180.,    180.,     180. /)
129    REAL, DIMENSION(nfiles), SAVE     :: phys_out_latmin        = (/    -90.,    -90.,    -90.,     -90., &
130                                                                    -90., -90., -90.,    -90.,     -90. /)
131    REAL, DIMENSION(nfiles), SAVE     :: phys_out_latmax        = (/  90.,     90.,     90.,     90., &
132                                                                    90., 90., 90., 90., 90. /)                       
[1825]133#ifdef CPP_XIOS
134    ! ug Variables utilisées pour récupérer le calendrier pour xios
135    INTEGER :: x_an, x_mois, x_jour
136    REAL :: x_heure
137#endif
138
[1791]139    WRITE(lunout,*) 'Debut phys_output_mod.F90'
[1562]140    ! Initialisations (Valeurs par defaut
[1403]141
[1791]142    IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
143    IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
[1813]144    ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
145    ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
146    ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
147    ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
148    ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
[1403]149
[1813]150
[1828]151    levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD /)
[1065]152
[1562]153    phys_out_filenames(1) = 'histmth'
154    phys_out_filenames(2) = 'histday'
155    phys_out_filenames(3) = 'histhf'
156    phys_out_filenames(4) = 'histins'
157    phys_out_filenames(5) = 'histLES'
158    phys_out_filenames(6) = 'histstn'
[1828]159    phys_out_filenames(7) = 'histmthNMC'
160    phys_out_filenames(8) = 'histdayNMC'
161    phys_out_filenames(9) = 'histhfNMC.nc'
[907]162
[1562]163    type_ecri(1) = 'ave(X)'
164    type_ecri(2) = 'ave(X)'
165    type_ecri(3) = 'ave(X)'
166    type_ecri(4) = 'inst(X)'
167    type_ecri(5) = 'ave(X)'
168    type_ecri(6) = 'inst(X)'
[1828]169    type_ecri(7) = 'inst(X)'
170    type_ecri(8) = 'inst(X)'
171    type_ecri(9) = 'inst(X)'
[907]172
[1562]173    clef_files(1) = ok_mensuel
174    clef_files(2) = ok_journe
175    clef_files(3) = ok_hf
176    clef_files(4) = ok_instan
177    clef_files(5) = ok_LES
178    clef_files(6) = ok_instan
[1828]179    clef_files(7) = ok_histNMC(1)
180    clef_files(8) = ok_histNMC(2)
181    clef_files(9) = ok_histNMC(3)
[907]182
[1562]183    !sortir des fichiers "stations" si clef_stations(:)=.TRUE.
184    clef_stations(1) = .FALSE.
185    clef_stations(2) = .FALSE.
186    clef_stations(3) = .FALSE.
187    clef_stations(4) = .FALSE.
188    clef_stations(5) = .FALSE.
189    clef_stations(6) = .FALSE.
[1828]190    clef_stations(7) = .FALSE.
191    clef_stations(8) = .FALSE.
192    clef_stations(9) = .FALSE.
[1539]193
[1562]194    lev_files(1) = lev_histmth
195    lev_files(2) = lev_histday
196    lev_files(3) = lev_histhf
197    lev_files(4) = lev_histins
198    lev_files(5) = lev_histLES
199    lev_files(6) = lev_histins
[1828]200    lev_files(7) = levout_histNMC(1)
201    lev_files(8) = levout_histNMC(2)
202    lev_files(9) = levout_histNMC(3)
[907]203
[1562]204    ecrit_files(1) = ecrit_mth
205    ecrit_files(2) = ecrit_day
206    ecrit_files(3) = ecrit_hf
207    ecrit_files(4) = ecrit_ins
208    ecrit_files(5) = ecrit_LES
209    ecrit_files(6) = ecrit_ins
[1912]210    ecrit_files(7) = freq_outNMC(1)
211    ecrit_files(8) = freq_outNMC(2)
212    ecrit_files(9) = freq_outNMC(3)
[1279]213
[1562]214    !! Lectures des parametres de sorties dans physiq.def
[1279]215
[1791]216    CALL getin('phys_out_regfkey',phys_out_regfkey)
217    CALL getin('phys_out_lonmin',phys_out_lonmin)
218    CALL getin('phys_out_lonmax',phys_out_lonmax)
219    CALL getin('phys_out_latmin',phys_out_latmin)
220    CALL getin('phys_out_latmax',phys_out_latmax)
[1562]221    phys_out_levmin(:)=levmin(:)
[1791]222    CALL getin('phys_out_levmin',levmin)
[1562]223    phys_out_levmax(:)=levmax(:)
[1791]224    CALL getin('phys_out_levmax',levmax)
225    CALL getin('phys_out_filenames',phys_out_filenames)
[1562]226    phys_out_filekeys(:)=clef_files(:)
[1791]227    CALL getin('phys_out_filekeys',clef_files)
[1562]228    phys_out_filestations(:)=clef_stations(:)
[1791]229    CALL getin('phys_out_filestations',clef_stations)
[1562]230    phys_out_filelevels(:)=lev_files(:)
[1791]231    CALL getin('phys_out_filelevels',lev_files)
232    CALL getin('phys_out_filetimesteps',chtimestep)
[1562]233    phys_out_filetypes(:)=type_ecri(:)
[1791]234    CALL getin('phys_out_filetypes',type_ecri)
[1279]235
[1562]236    type_ecri_files(:)=type_ecri(:)
[1279]237
[1791]238    WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
239    WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
240    WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
241    WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
242    WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
243    WRITE(lunout,*)'phys_out_filetypes=',type_ecri
244    WRITE(lunout,*)'phys_out_filekeys=',clef_files
245    WRITE(lunout,*)'phys_out_filestations=',clef_stations
246    WRITE(lunout,*)'phys_out_filelevels=',lev_files
[1562]247
[1825]248#ifdef CPP_XIOS
249    ! ug Réglage du calendrier xios
250    !Temps julian => an, mois, jour, heure
[1912]251    IF (klon_glo==1) THEN                                       
252        CALL ymds2ju(annee_ref, 1, day_ref, hour, zjulian)
253    ELSE
254        CALL ymds2ju(annee_ref, 1, day_ref, 0.0, zjulian)
255    END IF
[1825]256    CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
257    CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure)
258#endif
259
[907]260!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1562]261    ! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
262    ! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
[907]263!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
264
[1807]265    zdtime_moy = dtime         ! Frequence ou l on moyenne
[1279]266
[1562]267    ! Calcul des Ahyb, Bhyb et Alt
[1791]268    DO k=1,klev
[1562]269       Ahyb(k)=(ap(k)+ap(k+1))/2.
270       Bhyb(k)=(bp(k)+bp(k+1))/2.
271       Alt(k)=log(preff/presnivs(k))*8.
[1791]272    ENDDO
[1562]273    !          if(prt_level.ge.1) then
[1791]274    WRITE(lunout,*)'Ap Hybrid = ',Ahyb(1:klev)
275    WRITE(lunout,*)'Bp Hybrid = ',Bhyb(1:klev)
276    WRITE(lunout,*)'Alt approx des couches pour une haut d echelle de 8km = ',Alt(1:klev)
[1562]277    !          endif
278    DO iff=1,nfiles
[929]279
[1641]280       ! Calculate ecrit_files for all files
[1884]281      IF ( chtimestep(iff).eq.'Default' ) then
282          ! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
283          ! ...)*86400.
[1641]284          ecrit_files(iff)=ecrit_files(iff)*86400.
[1912]285      ELSE IF (chtimestep(iff).eq.'-1') then
286          PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
287          PRINT*,'months length'
288          ecrit_files(iff)=-1.
[1884]289      else
290       CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
291      ENDIF
292
[1791]293       WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
[1641]294       zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
[1279]295
[1852]296#ifdef CPP_XIOS
297    ! ug déclaration des axes verticaux de chaque fichier:
298    CALL wxios_add_vaxis("presnivs", phys_out_filenames(iff), &
299            levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
300    CALL wxios_add_vaxis("Ahyb", phys_out_filenames(iff), &
301            levmax(iff) - levmin(iff) + 1, Ahyb)
302    CALL wxios_add_vaxis("Bhyb", phys_out_filenames(iff), &
303            levmax(iff) - levmin(iff) + 1, Bhyb)
304    CALL wxios_add_vaxis("Ahyb", phys_out_filenames(iff), &
305            levmax(iff) - levmin(iff) + 1, Alt)
306
307    IF (clef_files(iff)) THEN
308         CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
309    END IF
310#endif
311
[1641]312       IF (clef_files(iff)) THEN
[1279]313
[1562]314          idayref = day_ref
[1912]315! A noter pour
316! l heure initiale - dans les fichiers histoire hist* - on met comme 
317! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
318! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
319! par annee (IM).
320!
321     IF (klon_glo==1) THEN                                       
322         CALL ymds2ju(annee_ref, 1, idayref, hour, zjulian)     !jyg
323     ELSE
324         CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
325     END IF                                                     
[907]326!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
327!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1791]328          IF (phys_out_regfkey(iff)) then
[1562]329             imin_ins=1
330             imax_ins=iim
331             jmin_ins=1
332             jmax_ins=jjmp1
[907]333
[1562]334             ! correction abderr       
335             do i=1,iim
[1791]336                WRITE(lunout,*)'io_lon(i)=',io_lon(i)
337                IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
338                IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
[1562]339             enddo
[907]340
[1562]341             do j=1,jjmp1
[1791]342                WRITE(lunout,*)'io_lat(j)=',io_lat(j)
343                IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
344                IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
[1562]345             enddo
[907]346
[1791]347             WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
[1562]348                  imin_ins,imax_ins,jmin_ins,jmax_ins
[1791]349             WRITE(lunout,*)'longitudes : ', &
[1562]350                  io_lon(imin_ins),io_lon(imax_ins), &
351                  'latitudes : ', &
352                  io_lat(jmax_ins),io_lat(jmin_ins)
[907]353
[1562]354             CALL histbeg(phys_out_filenames(iff),iim,io_lon,jjmp1,io_lat, &
355                  imin_ins,imax_ins-imin_ins+1, &
356                  jmin_ins,jmax_ins-jmin_ins+1, &
357                  itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
[907]358!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[1562]359             !IM fichiers stations
[1791]360          else IF (clef_stations(iff)) THEN
[1539]361
[1791]362             WRITE(lunout,*)'phys_output_mod phys_out_filenames=',phys_out_filenames(iff)
[1539]363
[1791]364             CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
[1562]365                  phys_out_filenames(iff), &
366                  itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
367          else
[1825]368             CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
[1852]369                 dtime,nhorim(iff),nid_files(iff))
[1562]370          endif
[907]371
[1852]372#ifndef CPP_NO_IOIPSL
[1828]373          if (iff.le.6) then
374             CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", & 
[1562]375               levmax(iff) - levmin(iff) + 1, &
376               presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
[1807]377!!!! Composantes de la coordonnee sigma-hybride
[1562]378          CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
379               levmax(iff) - levmin(iff) + 1,Ahyb,nvertap(iff))
[907]380
[1562]381          CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
382               levmax(iff) - levmin(iff) + 1,Bhyb,nvertbp(iff))
[1279]383
[1828]384          CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &                       
[1562]385               levmax(iff) - levmin(iff) + 1,Alt,nvertAlt(iff))
[1279]386
[1828]387          else
388             CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
389               levmax(iff) - levmin(iff) + 1, &
390              rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
391          endif
392#endif
[907]393
[1791]394      IF (nqtot>=3) THEN
395            DO iq=3,nqtot 
396            iiq=niadv(iq)
[1828]397            o_trac(iq-2) = ctrl_out((/ 4, 5, 1, 1, 1, 10, 11, 11, 11 /), &
398                           tname(iiq),'Tracer '//ttext(iiq), "-",  &
399                           (/ '', '', '', '', '', '', '', '', '' /))
[1813]400
[1828]401            o_dtr_vdf(iq-2) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
402                              'd'//trim(tname(iq))//'_vdf',  &
403                              'Tendance tracer '//ttext(iiq), "-" , &
404                              (/ '', '', '', '', '', '', '', '', '' /))
[1813]405
[1828]406            o_dtr_the(iq-2) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
407                              'd'//trim(tname(iq))//'_the', &
408                              'Tendance tracer '//ttext(iiq), "-", &
409                              (/ '', '', '', '', '', '', '', '', '' /))
[1813]410
[1828]411            o_dtr_con(iq-2) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
412                              'd'//trim(tname(iq))//'_con', &
413                              'Tendance tracer '//ttext(iiq), "-", &
414                              (/ '', '', '', '', '', '', '', '', '' /))
[1813]415
[1828]416            o_dtr_lessi_impa(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
417                                     'd'//trim(tname(iq))//'_lessi_impa', &
418                                     'Tendance tracer '//ttext(iiq), "-", &
419                                     (/ '', '', '', '', '', '', '', '', '' /))
[1813]420
[1828]421            o_dtr_lessi_nucl(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
422                                     'd'//trim(tname(iq))//'_lessi_nucl', &
423                                     'Tendance tracer '//ttext(iiq), "-", &
424                                     (/ '', '', '', '', '', '', '', '', '' /))
[1813]425
[1828]426            o_dtr_insc(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
427                               'd'//trim(tname(iq))//'_insc', &
428                               'Tendance tracer '//ttext(iiq), "-", &
429                               (/ '', '', '', '', '', '', '', '', '' /))
[1813]430
[1828]431            o_dtr_bcscav(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
432                                 'd'//trim(tname(iq))//'_bcscav', &
433                                 'Tendance tracer '//ttext(iiq), "-", &
434                                 (/ '', '', '', '', '', '', '', '', '' /))
[1813]435
[1828]436            o_dtr_evapls(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
437                                 'd'//trim(tname(iq))//'_evapls', &
438                                 'Tendance tracer '//ttext(iiq), "-", &
439                                 (/ '', '', '', '', '', '', '', '', '' /))
[1813]440
[1828]441            o_dtr_ls(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
442                             'd'//trim(tname(iq))//'_ls', &
443                             'Tendance tracer '//ttext(iiq), "-", &
444                             (/ '', '', '', '', '', '', '', '', '' /))
[1813]445
[1828]446            o_dtr_trsp(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
447                               'd'//trim(tname(iq))//'_trsp', &
448                               'Tendance tracer '//ttext(iiq), "-", &
449                               (/ '', '', '', '', '', '', '', '', '' /))
[1813]450
[1828]451            o_dtr_sscav(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
452                                'd'//trim(tname(iq))//'_sscav', &
453                                'Tendance tracer '//ttext(iiq), "-", &
454                                (/ '', '', '', '', '', '', '', '', '' /))
[1813]455
[1828]456            o_dtr_sat(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
457                               'd'//trim(tname(iq))//'_sat', &
458                               'Tendance tracer '//ttext(iiq), "-", &
459                               (/ '', '', '', '', '', '', '', '', '' /))
[1813]460
[1828]461            o_dtr_uscav(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
462                                'd'//trim(tname(iq))//'_uscav', &
463                                'Tendance tracer '//ttext(iiq), "-", &
464                                 (/ '', '', '', '', '', '', '', '', '' /))
[1813]465
[1828]466            o_dtr_dry(iq-2) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
467                              'cum'//'d'//trim(tname(iq))//'_dry', &
468                              'tracer tendency dry deposition'//ttext(iiq), "-", &
469                              (/ '', '', '', '', '', '', '', '', '' /))
[1813]470
[1828]471            o_trac_cum(iq-2) = ctrl_out((/ 3, 4, 10, 10, 10, 10, 11, 11, 11 /), &
472                               'cum'//tname(iiq),&
473                               'Cumulated tracer '//ttext(iiq), "-", &
474                               (/ '', '', '', '', '', '', '', '', '' /))
[1791]475            ENDDO
476      ENDIF
[1539]477
[1807]478    ENDIF ! clef_files
[1539]479
[1807]480    ENDDO !  iff
[1539]481
[1641]482    ! Updated write frequencies due to phys_out_filetimesteps.
483    ! Write frequencies are now in seconds. 
484    ecrit_mth = ecrit_files(1)
485    ecrit_day = ecrit_files(2)
486    ecrit_hf  = ecrit_files(3)
487    ecrit_ins = ecrit_files(4)
488    ecrit_LES = ecrit_files(5)
489    ecrit_ins = ecrit_files(6)
490
[1791]491    WRITE(lunout,*)'swaero_diag=',swaero_diag
492    WRITE(lunout,*)'Fin phys_output_mod.F90'
[1920]493
[1791]494  end SUBROUTINE phys_output_open
[907]495
496
497
[1562]498  SUBROUTINE convers_timesteps(str,dtime,timestep)
[1279]499
[1562]500    use ioipsl
501    USE phys_cal_mod
[1279]502
[1562]503    IMPLICIT NONE
[1279]504
[1791]505    CHARACTER(LEN=20)   :: str
506    CHARACTER(LEN=10)   :: type
507    INTEGER             :: ipos,il
[1562]508    real                :: ttt,xxx,timestep,dayseconde,dtime
509    parameter (dayseconde=86400.)
510    include "temps.h"
511    include "comconst.h"
[1575]512    include "iniprint.h"
[1279]513
[1791]514    ipos=scan(str,'0123456789.',.TRUE.)
[1562]515    ! 
516    il=len_trim(str)
[1937]517    WRITE(lunout,*) "ipos = ", ipos
518    WRITE(lunout,*) "il = ", il
519    if (ipos == 0) call abort_gcm("convers_timesteps", "bad str", 1)
[1562]520    read(str(1:ipos),*) ttt
[1791]521    WRITE(lunout,*)ttt
[1562]522    type=str(ipos+1:il)
[1279]523
524
[1791]525    IF ( il == ipos ) then
[1562]526       type='day'
527    endif
[1279]528
[1791]529    IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
530    IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) then
531       WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
[1562]532       timestep = ttt * dayseconde * mth_len
533    endif
[1791]534    IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
535    IF ( type == 'mn'.or.type == 'minutes'  ) timestep = ttt * 60.
536    IF ( type == 's'.or.type == 'sec'.or.type == 'secondes'   ) timestep = ttt
537    IF ( type == 'TS' ) timestep = ttt * dtime
[1279]538
[1791]539    WRITE(lunout,*)'type =      ',type
540    WRITE(lunout,*)'nb j/h/m =  ',ttt
541    WRITE(lunout,*)'timestep(s)=',timestep
[1279]542
[1562]543  END SUBROUTINE convers_timesteps
[1279]544
[907]545END MODULE phys_output_mod
546
Note: See TracBrowser for help on using the repository browser.