Context Navigation

phyetat0.F90 @ 2212

Last change on this file since 2212 was 2209, checked in by Ehouarn Millour, 10 years ago
Update of the slab ocean by Francis Codron. There are now 3 possibilities for the "version_ocean" slab type: sicOBS = prescribed ice fraction. Water temperature nearby is set to -1.8°C and cannot become lower. sicNO = ignore sea ice. One can prescribe a fraction, but the nearby ocean evolves freely, depending on surface fluxes: temperature can go below freezing point or above... sicINT = interactive sea ice. EM
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 33.8 KB

Line
1	! $Id: phyetat0.F90 2209 2015-02-16 07:34:28Z oboucher $
2
3	SUBROUTINE phyetat0 (fichnom, clesphy0, tabcntr0)
4
5	USE dimphy, only: klon, zmasq, klev, nslay
6	USE iophy, ONLY : init_iophy_new
7	USE ocean_cpl_mod, ONLY : ocean_cpl_init
8	USE fonte_neige_mod, ONLY : fonte_neige_init
9	USE pbl_surface_mod, ONLY : pbl_surface_init
10	USE surface_data, ONLY : type_ocean, version_ocean
11	USE phys_state_var_mod, ONLY : ancien_ok, clwcon, detr_therm, dtime, &
12	du_gwd_rando, dv_gwd_rando, entr_therm, f0, falb1, falb2, fm_therm, &
13	ftsol, pbl_tke, pctsrf, q_ancien, radpas, radsol, rain_fall, ratqs, &
14	rlat, rlon, rnebcon, rugoro, sig1, snow_fall, solaire_etat0, sollw, sollwdown, &
15	solsw, t_ancien, u_ancien, v_ancien, w01, wake_cstar, wake_deltaq, &
16	wake_deltat, wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
17	wake_s, zgam, &
18	zmax0, zmea, zpic, zsig, &
19	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
20	USE iostart, ONLY : close_startphy, get_field, get_var, open_startphy
21	USE infotrac, only: nbtr, type_trac, tname, niadv
22	USE traclmdz_mod, ONLY : traclmdz_from_restart
23	USE carbon_cycle_mod, ONLY : carbon_cycle_tr, carbon_cycle_cpl, co2_send
24	USE indice_sol_mod, only: nbsrf, is_ter, epsfra, is_lic, is_oce, is_sic
25	USE ocean_slab_mod, ONLY: tslab, seaice, tice, ocean_slab_init
26
27	IMPLICIT none
28	!======================================================================
29	! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
30	! Objet: Lecture de l'etat initial pour la physique
31	!======================================================================
32	include "dimensions.h"
33	include "netcdf.inc"
34	include "dimsoil.h"
35	include "clesphys.h"
36	include "temps.h"
37	include "thermcell.h"
38	include "compbl.h"
39	include "YOMCST.h"
40	!======================================================================
41	CHARACTER() fichnom
42
43	! les variables globales lues dans le fichier restart
44
45	REAL tsoil(klon, nsoilmx, nbsrf)
46	REAL qsurf(klon, nbsrf)
47	REAL qsol(klon)
48	REAL snow(klon, nbsrf)
49	REAL evap(klon, nbsrf)
50	real fder(klon)
51	REAL frugs(klon, nbsrf)
52	REAL agesno(klon, nbsrf)
53	REAL run_off_lic_0(klon)
54	REAL fractint(klon)
55	REAL trs(klon, nbtr)
56	REAL zts(klon)
57
58	CHARACTER*6 ocean_in
59	LOGICAL ok_veget_in
60
61	INTEGER longcles
62	PARAMETER ( longcles = 20 )
63	REAL clesphy0( longcles )
64
65	REAL xmin, xmax
66
67	INTEGER nid, nvarid
68	INTEGER ierr, i, nsrf, isoil , k
69	INTEGER length
70	PARAMETER (length=100)
71	INTEGER it, iiq
72	REAL tab_cntrl(length), tabcntr0(length)
73	CHARACTER*7 str7
74	CHARACTER*2 str2
75	LOGICAL :: found
76
77	! FH1D
78	! real iolat(jjm+1)
79	real iolat(jjm+1-1/(iim*jjm))
80
81	! Ouvrir le fichier contenant l'etat initial:
82
83	CALL open_startphy(fichnom)
84
85	! Lecture des parametres de controle:
86
87	CALL get_var("controle", tab_cntrl)
88
89	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
90	! FH 2008/05/09 On elimine toutes les clefs physiques dans la dynamique
91	! Les constantes de la physiques sont lues dans la physique seulement.
92	! Les egalites du type
93	! tab_cntrl( 5 )=clesphy0(1)
94	! sont remplacees par
95	! clesphy0(1)=tab_cntrl( 5 )
96	! On inverse aussi la logique.
97	! On remplit les tab_cntrl avec les parametres lus dans les .def
98	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
99
100	DO i = 1, length
101	tabcntr0( i ) = tab_cntrl( i )
102	ENDDO
103
104	tab_cntrl(1)=dtime
105	tab_cntrl(2)=radpas
106
107	! co2_ppm : value from the previous time step
108	IF (carbon_cycle_tr .OR. carbon_cycle_cpl) THEN
109	co2_ppm = tab_cntrl(3)
110	RCO2 = co2_ppm * 1.0e-06 * 44.011/28.97
111	! ELSE : keep value from .def
112	END IF
113
114	! co2_ppm0 : initial value of atmospheric CO2 (from create_etat0_limit.e .def)
115	co2_ppm0 = tab_cntrl(16)
116
117	solaire_etat0 = tab_cntrl(4)
118	tab_cntrl(5)=iflag_con
119	tab_cntrl(6)=nbapp_rad
120
121	if (cycle_diurne) tab_cntrl( 7) =1.
122	if (soil_model) tab_cntrl( 8) =1.
123	if (new_oliq) tab_cntrl( 9) =1.
124	if (ok_orodr) tab_cntrl(10) =1.
125	if (ok_orolf) tab_cntrl(11) =1.
126	if (ok_limitvrai) tab_cntrl(12) =1.
127
128	itau_phy = tab_cntrl(15)
129
130	clesphy0(1)=tab_cntrl( 5 )
131	clesphy0(2)=tab_cntrl( 6 )
132	clesphy0(3)=tab_cntrl( 7 )
133	clesphy0(4)=tab_cntrl( 8 )
134	clesphy0(5)=tab_cntrl( 9 )
135	clesphy0(6)=tab_cntrl( 10 )
136	clesphy0(7)=tab_cntrl( 11 )
137	clesphy0(8)=tab_cntrl( 12 )
138
139	! Lecture des latitudes (coordonnees):
140
141	CALL get_field("latitude", rlat)
142
143	! Lecture des longitudes (coordonnees):
144
145	CALL get_field("longitude", rlon)
146
147	! Lecture du masque terre mer
148
149	CALL get_field("masque", zmasq, found)
150	IF (.NOT. found) THEN
151	PRINT*, 'phyetat0: Le champ <masque> est absent'
152	PRINT *, 'fichier startphy non compatible avec phyetat0'
153	ENDIF
154
155	! Lecture des fractions pour chaque sous-surface
156
157	! initialisation des sous-surfaces
158
159	pctsrf = 0.
160
161	! fraction de terre
162
163	CALL get_field("FTER", pctsrf(:, is_ter), found)
164	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FTER> est absent'
165
166	! fraction de glace de terre
167
168	CALL get_field("FLIC", pctsrf(:, is_lic), found)
169	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FLIC> est absent'
170
171	! fraction d'ocean
172
173	CALL get_field("FOCE", pctsrf(:, is_oce), found)
174	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FOCE> est absent'
175
176	! fraction glace de mer
177
178	CALL get_field("FSIC", pctsrf(:, is_sic), found)
179	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FSIC> est absent'
180
181	! Verification de l'adequation entre le masque et les sous-surfaces
182
183	fractint( 1 : klon) = pctsrf(1 : klon, is_ter) &
184	+ pctsrf(1 : klon, is_lic)
185	DO i = 1 , klon
186	IF ( abs(fractint(i) - zmasq(i) ) .GT. EPSFRA ) THEN
187	WRITE(, ) 'phyetat0: attention fraction terre pas ', &
188	'coherente ', i, zmasq(i), pctsrf(i, is_ter) &
189	, pctsrf(i, is_lic)
190	WRITE(, ) 'Je force la coherence zmasq=fractint'
191	zmasq(i) = fractint(i)
192	ENDIF
193	END DO
194	fractint (1 : klon) = pctsrf(1 : klon, is_oce) &
195	+ pctsrf(1 : klon, is_sic)
196	DO i = 1 , klon
197	IF ( abs( fractint(i) - (1. - zmasq(i))) .GT. EPSFRA ) THEN
198	WRITE(, ) 'phyetat0 attention fraction ocean pas ', &
199	'coherente ', i, zmasq(i) , pctsrf(i, is_oce) &
200	, pctsrf(i, is_sic)
201	WRITE(, ) 'Je force la coherence zmasq=1.-fractint'
202	zmasq(i) = 1. - fractint(i)
203	ENDIF
204	END DO
205
206	! Lecture des temperatures du sol:
207
208	CALL get_field("TS", ftsol(:, 1), found)
209	IF (.NOT. found) THEN
210	PRINT*, 'phyetat0: Le champ <TS> est absent'
211	PRINT, ' Mais je vais essayer de lire TS*'
212	DO nsrf = 1, nbsrf
213	IF (nsrf.GT.99) THEN
214	PRINT*, "Trop de sous-mailles"
215	call abort_gcm("phyetat0", "", 1)
216	ENDIF
217	WRITE(str2, '(i2.2)') nsrf
218	CALL get_field("TS"//str2, ftsol(:, nsrf))
219
220	xmin = 1.0E+20
221	xmax = -1.0E+20
222	DO i = 1, klon
223	xmin = MIN(ftsol(i, nsrf), xmin)
224	xmax = MAX(ftsol(i, nsrf), xmax)
225	ENDDO
226	PRINT, 'Temperature du sol TS*:', nsrf, xmin, xmax
227	ENDDO
228	ELSE
229	PRINT*, 'phyetat0: Le champ <TS> est present'
230	PRINT, ' J ignore donc les autres temperatures TS*'
231	xmin = 1.0E+20
232	xmax = -1.0E+20
233	DO i = 1, klon
234	xmin = MIN(ftsol(i, 1), xmin)
235	xmax = MAX(ftsol(i, 1), xmax)
236	ENDDO
237	PRINT*, 'Temperature du sol <TS>', xmin, xmax
238	DO nsrf = 2, nbsrf
239	DO i = 1, klon
240	ftsol(i, nsrf) = ftsol(i, 1)
241	ENDDO
242	ENDDO
243	ENDIF
244
245	! Lecture des temperatures du sol profond:
246
247	DO nsrf = 1, nbsrf
248	DO isoil=1, nsoilmx
249	IF (isoil.GT.99 .AND. nsrf.GT.99) THEN
250	PRINT*, "Trop de couches ou sous-mailles"
251	call abort_gcm("phyetat0", "", 1)
252	ENDIF
253	WRITE(str7, '(i2.2, "srf", i2.2)') isoil, nsrf
254
255	CALL get_field('Tsoil'//str7, tsoil(:, isoil, nsrf), found)
256	IF (.NOT. found) THEN
257	PRINT*, "phyetat0: Le champ <Tsoil"//str7//"> est absent"
258	PRINT*, " Il prend donc la valeur de surface"
259	DO i=1, klon
260	tsoil(i, isoil, nsrf)=ftsol(i, nsrf)
261	ENDDO
262	ENDIF
263	ENDDO
264	ENDDO
265
266	! Lecture de l'humidite de l'air juste au dessus du sol:
267
268	CALL get_field("QS", qsurf(:, 1), found)
269	IF (.NOT. found) THEN
270	PRINT*, 'phyetat0: Le champ <QS> est absent'
271	PRINT, ' Mais je vais essayer de lire QS*'
272	DO nsrf = 1, nbsrf
273	IF (nsrf.GT.99) THEN
274	PRINT*, "Trop de sous-mailles"
275	call abort_gcm("phyetat0", "", 1)
276	ENDIF
277	WRITE(str2, '(i2.2)') nsrf
278	CALL get_field("QS"//str2, qsurf(:, nsrf))
279	xmin = 1.0E+20
280	xmax = -1.0E+20
281	DO i = 1, klon
282	xmin = MIN(qsurf(i, nsrf), xmin)
283	xmax = MAX(qsurf(i, nsrf), xmax)
284	ENDDO
285	PRINT, 'Humidite pres du sol QS*:', nsrf, xmin, xmax
286	ENDDO
287	ELSE
288	PRINT*, 'phyetat0: Le champ <QS> est present'
289	PRINT, ' J ignore donc les autres humidites QS*'
290	xmin = 1.0E+20
291	xmax = -1.0E+20
292	DO i = 1, klon
293	xmin = MIN(qsurf(i, 1), xmin)
294	xmax = MAX(qsurf(i, 1), xmax)
295	ENDDO
296	PRINT*, 'Humidite pres du sol <QS>', xmin, xmax
297	DO nsrf = 2, nbsrf
298	DO i = 1, klon
299	qsurf(i, nsrf) = qsurf(i, 1)
300	ENDDO
301	ENDDO
302	ENDIF
303
304	! Eau dans le sol (pour le modele de sol "bucket")
305
306	CALL get_field("QSOL", qsol, found)
307	IF (.NOT. found) THEN
308	PRINT*, 'phyetat0: Le champ <QSOL> est absent'
309	PRINT*, ' Valeur par defaut nulle'
310	qsol(:)=0.
311	ENDIF
312
313	xmin = 1.0E+20
314	xmax = -1.0E+20
315	DO i = 1, klon
316	xmin = MIN(qsol(i), xmin)
317	xmax = MAX(qsol(i), xmax)
318	ENDDO
319	PRINT*, 'Eau dans le sol (mm) <QSOL>', xmin, xmax
320
321	! Lecture de neige au sol:
322
323	CALL get_field("SNOW", snow(:, 1), found)
324	IF (.NOT. found) THEN
325	PRINT*, 'phyetat0: Le champ <SNOW> est absent'
326	PRINT, ' Mais je vais essayer de lire SNOW*'
327	DO nsrf = 1, nbsrf
328	IF (nsrf.GT.99) THEN
329	PRINT*, "Trop de sous-mailles"
330	call abort_gcm("phyetat0", "", 1)
331	ENDIF
332	WRITE(str2, '(i2.2)') nsrf
333	CALL get_field( "SNOW"//str2, snow(:, nsrf))
334	xmin = 1.0E+20
335	xmax = -1.0E+20
336	DO i = 1, klon
337	xmin = MIN(snow(i, nsrf), xmin)
338	xmax = MAX(snow(i, nsrf), xmax)
339	ENDDO
340	PRINT, 'Neige du sol SNOW*:', nsrf, xmin, xmax
341	ENDDO
342	ELSE
343	PRINT*, 'phyetat0: Le champ <SNOW> est present'
344	PRINT, ' J ignore donc les autres neiges SNOW*'
345	xmin = 1.0E+20
346	xmax = -1.0E+20
347	DO i = 1, klon
348	xmin = MIN(snow(i, 1), xmin)
349	xmax = MAX(snow(i, 1), xmax)
350	ENDDO
351	PRINT*, 'Neige du sol <SNOW>', xmin, xmax
352	DO nsrf = 2, nbsrf
353	DO i = 1, klon
354	snow(i, nsrf) = snow(i, 1)
355	ENDDO
356	ENDDO
357	ENDIF
358
359	! Lecture de albedo de l'interval visible au sol:
360
361	CALL get_field("ALBE", falb1(:, 1), found)
362	IF (.NOT. found) THEN
363	PRINT*, 'phyetat0: Le champ <ALBE> est absent'
364	PRINT, ' Mais je vais essayer de lire ALBE*'
365	DO nsrf = 1, nbsrf
366	IF (nsrf.GT.99) THEN
367	PRINT*, "Trop de sous-mailles"
368	call abort_gcm("phyetat0", "", 1)
369	ENDIF
370	WRITE(str2, '(i2.2)') nsrf
371	CALL get_field("ALBE"//str2, falb1(:, nsrf))
372	xmin = 1.0E+20
373	xmax = -1.0E+20
374	DO i = 1, klon
375	xmin = MIN(falb1(i, nsrf), xmin)
376	xmax = MAX(falb1(i, nsrf), xmax)
377	ENDDO
378	PRINT, 'Albedo du sol ALBE*:', nsrf, xmin, xmax
379	ENDDO
380	ELSE
381	PRINT*, 'phyetat0: Le champ <ALBE> est present'
382	PRINT, ' J ignore donc les autres ALBE*'
383	xmin = 1.0E+20
384	xmax = -1.0E+20
385	DO i = 1, klon
386	xmin = MIN(falb1(i, 1), xmin)
387	xmax = MAX(falb1(i, 1), xmax)
388	ENDDO
389	PRINT*, 'Neige du sol <ALBE>', xmin, xmax
390	DO nsrf = 2, nbsrf
391	DO i = 1, klon
392	falb1(i, nsrf) = falb1(i, 1)
393	ENDDO
394	ENDDO
395	ENDIF
396
397	! Lecture de albedo au sol dans l'interval proche infra-rouge:
398
399	CALL get_field("ALBLW", falb2(:, 1), found)
400	IF (.NOT. found) THEN
401	PRINT*, 'phyetat0: Le champ <ALBLW> est absent'
402	PRINT, ' Mais je vais prendre ALBE*'
403	DO nsrf = 1, nbsrf
404	DO i = 1, klon
405	falb2(i, nsrf) = falb1(i, nsrf)
406	ENDDO
407	ENDDO
408	ELSE
409	PRINT*, 'phyetat0: Le champ <ALBLW> est present'
410	PRINT, ' J ignore donc les autres ALBLW*'
411	xmin = 1.0E+20
412	xmax = -1.0E+20
413	DO i = 1, klon
414	xmin = MIN(falb2(i, 1), xmin)
415	xmax = MAX(falb2(i, 1), xmax)
416	ENDDO
417	PRINT*, 'Neige du sol <ALBLW>', xmin, xmax
418	DO nsrf = 2, nbsrf
419	DO i = 1, klon
420	falb2(i, nsrf) = falb2(i, 1)
421	ENDDO
422	ENDDO
423	ENDIF
424
425	! Lecture de evaporation:
426
427	CALL get_field("EVAP", evap(:, 1), found)
428	IF (.NOT. found) THEN
429	PRINT*, 'phyetat0: Le champ <EVAP> est absent'
430	PRINT, ' Mais je vais essayer de lire EVAP*'
431	DO nsrf = 1, nbsrf
432	IF (nsrf.GT.99) THEN
433	PRINT*, "Trop de sous-mailles"
434	call abort_gcm("phyetat0", "", 1)
435	ENDIF
436	WRITE(str2, '(i2.2)') nsrf
437	CALL get_field("EVAP"//str2, evap(:, nsrf))
438	xmin = 1.0E+20
439	xmax = -1.0E+20
440	DO i = 1, klon
441	xmin = MIN(evap(i, nsrf), xmin)
442	xmax = MAX(evap(i, nsrf), xmax)
443	ENDDO
444	PRINT, 'evap du sol EVAP*:', nsrf, xmin, xmax
445	ENDDO
446	ELSE
447	PRINT*, 'phyetat0: Le champ <EVAP> est present'
448	PRINT, ' J ignore donc les autres EVAP*'
449	xmin = 1.0E+20
450	xmax = -1.0E+20
451	DO i = 1, klon
452	xmin = MIN(evap(i, 1), xmin)
453	xmax = MAX(evap(i, 1), xmax)
454	ENDDO
455	PRINT*, 'Evap du sol <EVAP>', xmin, xmax
456	DO nsrf = 2, nbsrf
457	DO i = 1, klon
458	evap(i, nsrf) = evap(i, 1)
459	ENDDO
460	ENDDO
461	ENDIF
462
463	! Lecture precipitation liquide:
464
465	CALL get_field("rain_f", rain_fall)
466	xmin = 1.0E+20
467	xmax = -1.0E+20
468	DO i = 1, klon
469	xmin = MIN(rain_fall(i), xmin)
470	xmax = MAX(rain_fall(i), xmax)
471	ENDDO
472	PRINT*, 'Precipitation liquide rain_f:', xmin, xmax
473
474	! Lecture precipitation solide:
475
476	CALL get_field("snow_f", snow_fall)
477	xmin = 1.0E+20
478	xmax = -1.0E+20
479	DO i = 1, klon
480	xmin = MIN(snow_fall(i), xmin)
481	xmax = MAX(snow_fall(i), xmax)
482	ENDDO
483	PRINT*, 'Precipitation solide snow_f:', xmin, xmax
484
485	! Lecture rayonnement solaire au sol:
486
487	CALL get_field("solsw", solsw, found)
488	IF (.NOT. found) THEN
489	PRINT*, 'phyetat0: Le champ <solsw> est absent'
490	PRINT*, 'mis a zero'
491	solsw(:) = 0.
492	ENDIF
493	xmin = 1.0E+20
494	xmax = -1.0E+20
495	DO i = 1, klon
496	xmin = MIN(solsw(i), xmin)
497	xmax = MAX(solsw(i), xmax)
498	ENDDO
499	PRINT*, 'Rayonnement solaire au sol solsw:', xmin, xmax
500
501	! Lecture rayonnement IF au sol:
502
503	CALL get_field("sollw", sollw, found)
504	IF (.NOT. found) THEN
505	PRINT*, 'phyetat0: Le champ <sollw> est absent'
506	PRINT*, 'mis a zero'
507	sollw = 0.
508	ENDIF
509	xmin = 1.0E+20
510	xmax = -1.0E+20
511	DO i = 1, klon
512	xmin = MIN(sollw(i), xmin)
513	xmax = MAX(sollw(i), xmax)
514	ENDDO
515	PRINT*, 'Rayonnement IF au sol sollw:', xmin, xmax
516
517	CALL get_field("sollwdown", sollwdown, found)
518	IF (.NOT. found) THEN
519	PRINT*, 'phyetat0: Le champ <sollwdown> est absent'
520	PRINT*, 'mis a zero'
521	sollwdown = 0.
522	zts=0.
523	do nsrf=1,nbsrf
524	zts(:)=zts(:)+ftsol(:,nsrf)*pctsrf(:,nsrf)
525	enddo
526	sollwdown(:)=sollw(:)+RSIGMAzts(:)*4
527	ENDIF
528	! print*,'TS SOLL',zts(klon/2),sollw(klon/2),sollwdown(klon/2)
529	xmin = 1.0E+20
530	xmax = -1.0E+20
531	DO i = 1, klon
532	xmin = MIN(sollwdown(i), xmin)
533	xmax = MAX(sollwdown(i), xmax)
534	ENDDO
535	PRINT*, 'Rayonnement IF au sol sollwdown:', xmin, xmax
536
537
538	! Lecture derive des flux:
539
540	CALL get_field("fder", fder, found)
541	IF (.NOT. found) THEN
542	PRINT*, 'phyetat0: Le champ <fder> est absent'
543	PRINT*, 'mis a zero'
544	fder = 0.
545	ENDIF
546	xmin = 1.0E+20
547	xmax = -1.0E+20
548	DO i = 1, klon
549	xmin = MIN(fder(i), xmin)
550	xmax = MAX(fder(i), xmax)
551	ENDDO
552	PRINT*, 'Derive des flux fder:', xmin, xmax
553
554	! Lecture du rayonnement net au sol:
555
556	CALL get_field("RADS", radsol)
557	xmin = 1.0E+20
558	xmax = -1.0E+20
559	DO i = 1, klon
560	xmin = MIN(radsol(i), xmin)
561	xmax = MAX(radsol(i), xmax)
562	ENDDO
563	PRINT*, 'Rayonnement net au sol radsol:', xmin, xmax
564
565	! Lecture de la longueur de rugosite
566
567	CALL get_field("RUG", frugs(:, 1), found)
568	IF (.NOT. found) THEN
569	PRINT*, 'phyetat0: Le champ <RUG> est absent'
570	PRINT, ' Mais je vais essayer de lire RUG*'
571	DO nsrf = 1, nbsrf
572	IF (nsrf.GT.99) THEN
573	PRINT*, "Trop de sous-mailles"
574	call abort_gcm("phyetat0", "", 1)
575	ENDIF
576	WRITE(str2, '(i2.2)') nsrf
577	CALL get_field("RUG"//str2, frugs(:, nsrf))
578	xmin = 1.0E+20
579	xmax = -1.0E+20
580	DO i = 1, klon
581	xmin = MIN(frugs(i, nsrf), xmin)
582	xmax = MAX(frugs(i, nsrf), xmax)
583	ENDDO
584	PRINT, 'rugosite du sol RUG*:', nsrf, xmin, xmax
585	ENDDO
586	ELSE
587	PRINT*, 'phyetat0: Le champ <RUG> est present'
588	PRINT, ' J ignore donc les autres RUG*'
589	xmin = 1.0E+20
590	xmax = -1.0E+20
591	DO i = 1, klon
592	xmin = MIN(frugs(i, 1), xmin)
593	xmax = MAX(frugs(i, 1), xmax)
594	ENDDO
595	PRINT*, 'rugosite <RUG>', xmin, xmax
596	DO nsrf = 2, nbsrf
597	DO i = 1, klon
598	frugs(i, nsrf) = frugs(i, 1)
599	ENDDO
600	ENDDO
601	ENDIF
602
603	! Lecture de l'age de la neige:
604
605	CALL get_field("AGESNO", agesno(:, 1), found)
606	IF (.NOT. found) THEN
607	PRINT*, 'phyetat0: Le champ <AGESNO> est absent'
608	PRINT, ' Mais je vais essayer de lire AGESNO*'
609	DO nsrf = 1, nbsrf
610	IF (nsrf.GT.99) THEN
611	PRINT*, "Trop de sous-mailles"
612	call abort_gcm("phyetat0", "", 1)
613	ENDIF
614	WRITE(str2, '(i2.2)') nsrf
615	CALL get_field("AGESNO"//str2, agesno(:, nsrf), found)
616	IF (.NOT. found) THEN
617	PRINT*, "phyetat0: Le champ <AGESNO"//str2//"> est absent"
618	agesno = 50.0
619	ENDIF
620	xmin = 1.0E+20
621	xmax = -1.0E+20
622	DO i = 1, klon
623	xmin = MIN(agesno(i, nsrf), xmin)
624	xmax = MAX(agesno(i, nsrf), xmax)
625	ENDDO
626	PRINT, 'Age de la neige AGESNO*:', nsrf, xmin, xmax
627	ENDDO
628	ELSE
629	PRINT*, 'phyetat0: Le champ <AGESNO> est present'
630	PRINT, ' J ignore donc les autres AGESNO*'
631	xmin = 1.0E+20
632	xmax = -1.0E+20
633	DO i = 1, klon
634	xmin = MIN(agesno(i, 1), xmin)
635	xmax = MAX(agesno(i, 1), xmax)
636	ENDDO
637	PRINT*, 'Age de la neige <AGESNO>', xmin, xmax
638	DO nsrf = 2, nbsrf
639	DO i = 1, klon
640	agesno(i, nsrf) = agesno(i, 1)
641	ENDDO
642	ENDDO
643	ENDIF
644
645	CALL get_field("ZMEA", zmea)
646	xmin = 1.0E+20
647	xmax = -1.0E+20
648	DO i = 1, klon
649	xmin = MIN(zmea(i), xmin)
650	xmax = MAX(zmea(i), xmax)
651	ENDDO
652	PRINT*, 'OROGRAPHIE SOUS-MAILLE zmea:', xmin, xmax
653
654	CALL get_field("ZSTD", zstd)
655	xmin = 1.0E+20
656	xmax = -1.0E+20
657	DO i = 1, klon
658	xmin = MIN(zstd(i), xmin)
659	xmax = MAX(zstd(i), xmax)
660	ENDDO
661	PRINT*, 'OROGRAPHIE SOUS-MAILLE zstd:', xmin, xmax
662
663	CALL get_field("ZSIG", zsig)
664	xmin = 1.0E+20
665	xmax = -1.0E+20
666	DO i = 1, klon
667	xmin = MIN(zsig(i), xmin)
668	xmax = MAX(zsig(i), xmax)
669	ENDDO
670	PRINT*, 'OROGRAPHIE SOUS-MAILLE zsig:', xmin, xmax
671
672	CALL get_field("ZGAM", zgam)
673	xmin = 1.0E+20
674	xmax = -1.0E+20
675	DO i = 1, klon
676	xmin = MIN(zgam(i), xmin)
677	xmax = MAX(zgam(i), xmax)
678	ENDDO
679	PRINT*, 'OROGRAPHIE SOUS-MAILLE zgam:', xmin, xmax
680
681	CALL get_field("ZTHE", zthe)
682	xmin = 1.0E+20
683	xmax = -1.0E+20
684	DO i = 1, klon
685	xmin = MIN(zthe(i), xmin)
686	xmax = MAX(zthe(i), xmax)
687	ENDDO
688	PRINT*, 'OROGRAPHIE SOUS-MAILLE zthe:', xmin, xmax
689
690	CALL get_field("ZPIC", zpic)
691	xmin = 1.0E+20
692	xmax = -1.0E+20
693	DO i = 1, klon
694	xmin = MIN(zpic(i), xmin)
695	xmax = MAX(zpic(i), xmax)
696	ENDDO
697	PRINT*, 'OROGRAPHIE SOUS-MAILLE zpic:', xmin, xmax
698
699	CALL get_field("ZVAL", zval)
700	xmin = 1.0E+20
701	xmax = -1.0E+20
702	DO i = 1, klon
703	xmin = MIN(zval(i), xmin)
704	xmax = MAX(zval(i), xmax)
705	ENDDO
706	PRINT*, 'OROGRAPHIE SOUS-MAILLE zval:', xmin, xmax
707
708	CALL get_field("RUGSREL", rugoro)
709	xmin = 1.0E+20
710	xmax = -1.0E+20
711	DO i = 1, klon
712	xmin = MIN(rugoro(i), xmin)
713	xmax = MAX(rugoro(i), xmax)
714	ENDDO
715	PRINT*, 'Rugosite relief (ecart-type) rugsrel:', xmin, xmax
716
717	ancien_ok = .TRUE.
718
719	CALL get_field("TANCIEN", t_ancien, found)
720	IF (.NOT. found) THEN
721	PRINT*, "phyetat0: Le champ <TANCIEN> est absent"
722	PRINT*, "Depart legerement fausse. Mais je continue"
723	ancien_ok = .FALSE.
724	ENDIF
725
726	CALL get_field("QANCIEN", q_ancien, found)
727	IF (.NOT. found) THEN
728	PRINT*, "phyetat0: Le champ <QANCIEN> est absent"
729	PRINT*, "Depart legerement fausse. Mais je continue"
730	ancien_ok = .FALSE.
731	ENDIF
732
733	CALL get_field("UANCIEN", u_ancien, found)
734	IF (.NOT. found) THEN
735	PRINT*, "phyetat0: Le champ <UANCIEN> est absent"
736	PRINT*, "Depart legerement fausse. Mais je continue"
737	ancien_ok = .FALSE.
738	ENDIF
739
740	CALL get_field("VANCIEN", v_ancien, found)
741	IF (.NOT. found) THEN
742	PRINT*, "phyetat0: Le champ <VANCIEN> est absent"
743	PRINT*, "Depart legerement fausse. Mais je continue"
744	ancien_ok = .FALSE.
745	ENDIF
746
747	clwcon=0.
748	CALL get_field("CLWCON", clwcon, found)
749	IF (.NOT. found) THEN
750	PRINT*, "phyetat0: Le champ CLWCON est absent"
751	PRINT*, "Depart legerement fausse. Mais je continue"
752	ENDIF
753	xmin = 1.0E+20
754	xmax = -1.0E+20
755	xmin = MINval(clwcon)
756	xmax = MAXval(clwcon)
757	PRINT*, 'Eau liquide convective (ecart-type) clwcon:', xmin, xmax
758
759	rnebcon = 0.
760	CALL get_field("RNEBCON", rnebcon, found)
761	IF (.NOT. found) THEN
762	PRINT*, "phyetat0: Le champ RNEBCON est absent"
763	PRINT*, "Depart legerement fausse. Mais je continue"
764	ENDIF
765	xmin = 1.0E+20
766	xmax = -1.0E+20
767	xmin = MINval(rnebcon)
768	xmax = MAXval(rnebcon)
769	PRINT*, 'Nebulosite convective (ecart-type) rnebcon:', xmin, xmax
770
771	! Lecture ratqs
772
773	ratqs=0.
774	CALL get_field("RATQS", ratqs, found)
775	IF (.NOT. found) THEN
776	PRINT*, "phyetat0: Le champ <RATQS> est absent"
777	PRINT*, "Depart legerement fausse. Mais je continue"
778	ENDIF
779	xmin = 1.0E+20
780	xmax = -1.0E+20
781	xmin = MINval(ratqs)
782	xmax = MAXval(ratqs)
783	PRINT*, '(ecart-type) ratqs:', xmin, xmax
784
785	! Lecture run_off_lic_0
786
787	CALL get_field("RUNOFFLIC0", run_off_lic_0, found)
788	IF (.NOT. found) THEN
789	PRINT*, "phyetat0: Le champ <RUNOFFLIC0> est absent"
790	PRINT*, "Depart legerement fausse. Mais je continue"
791	run_off_lic_0 = 0.
792	ENDIF
793	xmin = 1.0E+20
794	xmax = -1.0E+20
795	xmin = MINval(run_off_lic_0)
796	xmax = MAXval(run_off_lic_0)
797	PRINT*, '(ecart-type) run_off_lic_0:', xmin, xmax
798
799	! Lecture de l'energie cinetique turbulente
800
801	IF (iflag_pbl>1) then
802	DO nsrf = 1, nbsrf
803	IF (nsrf.GT.99) THEN
804	PRINT*, "Trop de sous-mailles"
805	call abort_gcm("phyetat0", "", 1)
806	ENDIF
807	WRITE(str2, '(i2.2)') nsrf
808	CALL get_field("TKE"//str2, pbl_tke(:, 1:klev+1, nsrf), found)
809	IF (.NOT. found) THEN
810	PRINT*, "phyetat0: <TKE"//str2//"> est absent"
811	pbl_tke(:, :, nsrf)=1.e-8
812	ENDIF
813	xmin = 1.0E+20
814	xmax = -1.0E+20
815	DO k = 1, klev+1
816	DO i = 1, klon
817	xmin = MIN(pbl_tke(i, k, nsrf), xmin)
818	xmax = MAX(pbl_tke(i, k, nsrf), xmax)
819	ENDDO
820	ENDDO
821	PRINT, 'Turbulent kinetic energyl TKE*:', nsrf, xmin, xmax
822	ENDDO
823	ENDIF
824
825	! Lecture de l'ecart de TKE (w) - (x)
826	!
827	IF (iflag_pbl>1 .AND. iflag_wake>=1 &
828	.AND. iflag_pbl_split >=1 ) then
829	DO nsrf = 1, nbsrf
830	IF (nsrf.GT.99) THEN
831	PRINT*, "Trop de sous-mailles"
832	call abort_gcm("phyetat0", "", 1)
833	ENDIF
834	WRITE(str2,'(i2.2)') nsrf
835	CALL get_field("DELTATKE"//str2, &
836	wake_delta_pbl_tke(:,1:klev+1,nsrf),found)
837	IF (.NOT. found) THEN
838	PRINT*, "phyetat0: <DELTATKE"//str2//"> est absent"
839	wake_delta_pbl_tke(:,:,nsrf)=0.
840	ENDIF
841	xmin = 1.0E+20
842	xmax = -1.0E+20
843	DO k = 1, klev+1
844	DO i = 1, klon
845	xmin = MIN(wake_delta_pbl_tke(i,k,nsrf),xmin)
846	xmax = MAX(wake_delta_pbl_tke(i,k,nsrf),xmax)
847	ENDDO
848	ENDDO
849	PRINT,'TKE difference (w)-(x) DELTATKE*:', nsrf, xmin, xmax
850	ENDDO
851
852	! delta_tsurf
853
854	DO nsrf = 1, nbsrf
855	IF (nsrf.GT.99) THEN
856	PRINT*, "Trop de sous-mailles"
857	call abort_gcm("phyetat0", "", 1)
858	ENDIF
859	WRITE(str2,'(i2.2)') nsrf
860	CALL get_field("DELTA_TSURF"//str2, delta_tsurf(:,nsrf), found)
861	IF (.NOT. found) THEN
862	PRINT*, "phyetat0: Le champ <DELTA_TSURF"//str2//"> est absent"
863	PRINT*, "Depart legerement fausse. Mais je continue"
864	delta_tsurf(:,nsrf)=0.
865	ELSE
866	xmin = 1.0E+20
867	xmax = -1.0E+20
868	DO i = 1, klon
869	xmin = MIN(delta_tsurf(i, nsrf), xmin)
870	xmax = MAX(delta_tsurf(i, nsrf), xmax)
871	ENDDO
872	PRINT*, 'delta_tsurf:', xmin, xmax
873	ENDIF
874	ENDDO ! nsrf = 1, nbsrf
875	ENDIF !(iflag_pbl>1 .AND. iflag_wake>=1 .AND. iflag_pbl_split >=1 )
876
877	! zmax0
878	CALL get_field("ZMAX0", zmax0, found)
879	IF (.NOT. found) THEN
880	PRINT*, "phyetat0: Le champ <ZMAX0> est absent"
881	PRINT*, "Depart legerement fausse. Mais je continue"
882	zmax0=40.
883	ENDIF
884	xmin = 1.0E+20
885	xmax = -1.0E+20
886	xmin = MINval(zmax0)
887	xmax = MAXval(zmax0)
888	PRINT*, '(ecart-type) zmax0:', xmin, xmax
889
890	! f0(ig)=1.e-5
891	! f0
892	CALL get_field("F0", f0, found)
893	IF (.NOT. found) THEN
894	PRINT*, "phyetat0: Le champ <f0> est absent"
895	PRINT*, "Depart legerement fausse. Mais je continue"
896	f0=1.e-5
897	ENDIF
898	xmin = 1.0E+20
899	xmax = -1.0E+20
900	xmin = MINval(f0)
901	xmax = MAXval(f0)
902	PRINT*, '(ecart-type) f0:', xmin, xmax
903
904	! sig1 or ema_work1
905
906	CALL get_field("sig1", sig1, found)
907	IF (.NOT. found) CALL get_field("EMA_WORK1", sig1, found)
908	IF (.NOT. found) THEN
909	PRINT*, "phyetat0: Le champ sig1 est absent"
910	PRINT*, "Depart legerement fausse. Mais je continue"
911	sig1=0.
912	ELSE
913	xmin = 1.0E+20
914	xmax = -1.0E+20
915	DO k = 1, klev
916	DO i = 1, klon
917	xmin = MIN(sig1(i, k), xmin)
918	xmax = MAX(sig1(i, k), xmax)
919	ENDDO
920	ENDDO
921	PRINT*, 'sig1:', xmin, xmax
922	ENDIF
923
924	! w01 or ema_work2
925
926	CALL get_field("w01", w01, found)
927	IF (.NOT. found) CALL get_field("EMA_WORK2", w01, found)
928	IF (.NOT. found) THEN
929	PRINT*, "phyetat0: Le champ w01 est absent"
930	PRINT*, "Depart legerement fausse. Mais je continue"
931	w01=0.
932	ELSE
933	xmin = 1.0E+20
934	xmax = -1.0E+20
935	DO k = 1, klev
936	DO i = 1, klon
937	xmin = MIN(w01(i, k), xmin)
938	xmax = MAX(w01(i, k), xmax)
939	ENDDO
940	ENDDO
941	PRINT*, 'w01:', xmin, xmax
942	ENDIF
943
944	! wake_deltat
945
946	CALL get_field("WAKE_DELTAT", wake_deltat, found)
947	IF (.NOT. found) THEN
948	PRINT*, "phyetat0: Le champ <WAKE_DELTAT> est absent"
949	PRINT*, "Depart legerement fausse. Mais je continue"
950	wake_deltat=0.
951	ELSE
952	xmin = 1.0E+20
953	xmax = -1.0E+20
954	DO k = 1, klev
955	DO i = 1, klon
956	xmin = MIN(wake_deltat(i, k), xmin)
957	xmax = MAX(wake_deltat(i, k), xmax)
958	ENDDO
959	ENDDO
960	PRINT*, 'wake_deltat:', xmin, xmax
961	ENDIF
962
963	! wake_deltaq
964
965	CALL get_field("WAKE_DELTAQ", wake_deltaq, found)
966	IF (.NOT. found) THEN
967	PRINT*, "phyetat0: Le champ <WAKE_DELTAQ> est absent"
968	PRINT*, "Depart legerement fausse. Mais je continue"
969	wake_deltaq=0.
970	ELSE
971	xmin = 1.0E+20
972	xmax = -1.0E+20
973	DO k = 1, klev
974	DO i = 1, klon
975	xmin = MIN(wake_deltaq(i, k), xmin)
976	xmax = MAX(wake_deltaq(i, k), xmax)
977	ENDDO
978	ENDDO
979	PRINT*, 'wake_deltaq:', xmin, xmax
980	ENDIF
981
982	! wake_s
983
984	CALL get_field("WAKE_S", wake_s, found)
985	IF (.NOT. found) THEN
986	PRINT*, "phyetat0: Le champ <WAKE_S> est absent"
987	PRINT*, "Depart legerement fausse. Mais je continue"
988	wake_s=0.
989	ENDIF
990	xmin = 1.0E+20
991	xmax = -1.0E+20
992	xmin = MINval(wake_s)
993	xmax = MAXval(wake_s)
994	PRINT*, '(ecart-type) wake_s:', xmin, xmax
995
996	! wake_cstar
997
998	CALL get_field("WAKE_CSTAR", wake_cstar, found)
999	IF (.NOT. found) THEN
1000	PRINT*, "phyetat0: Le champ <WAKE_CSTAR> est absent"
1001	PRINT*, "Depart legerement fausse. Mais je continue"
1002	wake_cstar=0.
1003	ENDIF
1004	xmin = 1.0E+20
1005	xmax = -1.0E+20
1006	xmin = MINval(wake_cstar)
1007	xmax = MAXval(wake_cstar)
1008	PRINT*, '(ecart-type) wake_cstar:', xmin, xmax
1009
1010	! wake_pe
1011
1012	CALL get_field("WAKE_PE", wake_pe, found)
1013	IF (.NOT. found) THEN
1014	PRINT*, "phyetat0: Le champ <WAKE_PE> est absent"
1015	PRINT*, "Depart legerement fausse. Mais je continue"
1016	wake_pe=0.
1017	ENDIF
1018	xmin = 1.0E+20
1019	xmax = -1.0E+20
1020	xmin = MINval(wake_pe)
1021	xmax = MAXval(wake_pe)
1022	PRINT*, '(ecart-type) wake_pe:', xmin, xmax
1023
1024	! wake_fip
1025
1026	CALL get_field("WAKE_FIP", wake_fip, found)
1027	IF (.NOT. found) THEN
1028	PRINT*, "phyetat0: Le champ <WAKE_FIP> est absent"
1029	PRINT*, "Depart legerement fausse. Mais je continue"
1030	wake_fip=0.
1031	ENDIF
1032	xmin = 1.0E+20
1033	xmax = -1.0E+20
1034	xmin = MINval(wake_fip)
1035	xmax = MAXval(wake_fip)
1036	PRINT*, '(ecart-type) wake_fip:', xmin, xmax
1037
1038	! thermiques
1039
1040	CALL get_field("FM_THERM", fm_therm, found)
1041	IF (.NOT. found) THEN
1042	PRINT*, "phyetat0: Le champ <fm_therm> est absent"
1043	PRINT*, "Depart legerement fausse. Mais je continue"
1044	fm_therm=0.
1045	ENDIF
1046	xmin = 1.0E+20
1047	xmax = -1.0E+20
1048	xmin = MINval(fm_therm)
1049	xmax = MAXval(fm_therm)
1050	PRINT*, '(ecart-type) fm_therm:', xmin, xmax
1051
1052	CALL get_field("ENTR_THERM", entr_therm, found)
1053	IF (.NOT. found) THEN
1054	PRINT*, "phyetat0: Le champ <entr_therm> est absent"
1055	PRINT*, "Depart legerement fausse. Mais je continue"
1056	entr_therm=0.
1057	ENDIF
1058	xmin = 1.0E+20
1059	xmax = -1.0E+20
1060	xmin = MINval(entr_therm)
1061	xmax = MAXval(entr_therm)
1062	PRINT*, '(ecart-type) entr_therm:', xmin, xmax
1063
1064	CALL get_field("DETR_THERM", detr_therm, found)
1065	IF (.NOT. found) THEN
1066	PRINT*, "phyetat0: Le champ <detr_therm> est absent"
1067	PRINT*, "Depart legerement fausse. Mais je continue"
1068	detr_therm=0.
1069	ENDIF
1070	xmin = 1.0E+20
1071	xmax = -1.0E+20
1072	xmin = MINval(detr_therm)
1073	xmax = MAXval(detr_therm)
1074	PRINT*, '(ecart-type) detr_therm:', xmin, xmax
1075
1076	CALL get_field("ALE_BL", ale_bl, found)
1077	IF (.NOT. found) THEN
1078	PRINT*, "phyetat0: Le champ <ale_bl> est absent"
1079	PRINT*, "Depart legerement fausse. Mais je continue"
1080	ale_bl=0.
1081	ENDIF
1082	xmin = 1.0E+20
1083	xmax = -1.0E+20
1084	xmin = MINval(ale_bl)
1085	xmax = MAXval(ale_bl)
1086	PRINT*, '(ecart-type) ale_bl:', xmin, xmax
1087
1088	CALL get_field("ALE_BL_TRIG", ale_bl_trig, found)
1089	IF (.NOT. found) THEN
1090	PRINT*, "phyetat0: Le champ <ale_bl_trig> est absent"
1091	PRINT*, "Depart legerement fausse. Mais je continue"
1092	ale_bl_trig=0.
1093	ENDIF
1094	xmin = 1.0E+20
1095	xmax = -1.0E+20
1096	xmin = MINval(ale_bl_trig)
1097	xmax = MAXval(ale_bl_trig)
1098	PRINT*, '(ecart-type) ale_bl_trig:', xmin, xmax
1099
1100	CALL get_field("ALP_BL", alp_bl, found)
1101	IF (.NOT. found) THEN
1102	PRINT*, "phyetat0: Le champ <alp_bl> est absent"
1103	PRINT*, "Depart legerement fausse. Mais je continue"
1104	alp_bl=0.
1105	ENDIF
1106	xmin = 1.0E+20
1107	xmax = -1.0E+20
1108	xmin = MINval(alp_bl)
1109	xmax = MAXval(alp_bl)
1110	PRINT*, '(ecart-type) alp_bl:', xmin, xmax
1111
1112	! Read and send field trs to traclmdz
1113
1114	IF (type_trac == 'lmdz') THEN
1115	DO it=1, nbtr
1116	iiq=niadv(it+2)
1117	CALL get_field("trs_"//tname(iiq), trs(:, it), found)
1118	IF (.NOT. found) THEN
1119	PRINT*, &
1120	"phyetat0: Le champ <trs_"//tname(iiq)//"> est absent"
1121	PRINT*, "Depart legerement fausse. Mais je continue"
1122	trs(:, it) = 0.
1123	ENDIF
1124	xmin = 1.0E+20
1125	xmax = -1.0E+20
1126	xmin = MINval(trs(:, it))
1127	xmax = MAXval(trs(:, it))
1128	PRINT*, "(ecart-type) trs_"//tname(iiq)//" :", xmin, xmax
1129
1130	END DO
1131	CALL traclmdz_from_restart(trs)
1132
1133	IF (carbon_cycle_cpl) THEN
1134	ALLOCATE(co2_send(klon), stat=ierr)
1135	IF (ierr /= 0) CALL abort_gcm &
1136	('phyetat0', 'pb allocation co2_send', 1)
1137	CALL get_field("co2_send", co2_send, found)
1138	IF (.NOT. found) THEN
1139	PRINT*, "phyetat0: Le champ <co2_send> est absent"
1140	PRINT*, "Initialisation uniforme a co2_ppm=", co2_ppm
1141	co2_send(:) = co2_ppm
1142	END IF
1143	END IF
1144	END IF
1145
1146	if (ok_gwd_rando) then
1147	call get_field("du_gwd_rando", du_gwd_rando, found)
1148	if (.not. found) then
1149	print *, "du_gwd_rando not found, setting it to 0."
1150	du_gwd_rando = 0.
1151	end if
1152
1153	call get_field("dv_gwd_rando", dv_gwd_rando, found)
1154	if (.not. found) then
1155	print *, "dv_gwd_rando not found, setting it to 0."
1156	dv_gwd_rando = 0.
1157	end if
1158	end if
1159
1160	! Initialize Slab variables
1161	IF ( type_ocean == 'slab' ) THEN
1162	print*, "calling slab_init"
1163	CALL ocean_slab_init(dtime, pctsrf)
1164	! tslab
1165	CALL get_field("tslab", tslab, found)
1166	IF (.NOT. found) THEN
1167	PRINT*, "phyetat0: Le champ <tslab> est absent"
1168	PRINT*, "Initialisation a tsol_oce"
1169	DO i=1,nslay
1170	tslab(:,i)=MAX(ftsol(:,is_oce),271.35)
1171	END DO
1172	END IF
1173	! Sea ice variables
1174	IF (version_ocean == 'sicINT') THEN
1175	CALL get_field("slab_tice", tice, found)
1176	IF (.NOT. found) THEN
1177	PRINT*, "phyetat0: Le champ <tice> est absent"
1178	PRINT*, "Initialisation a tsol_sic"
1179	tice(:)=ftsol(:,is_sic)
1180	END IF
1181	CALL get_field("seaice", seaice, found)
1182	IF (.NOT. found) THEN
1183	PRINT*, "phyetat0: Le champ <seaice> est absent"
1184	PRINT*, "Initialisation a 0/1m suivant fraction glace"
1185	seaice(:)=0.
1186	WHERE (pctsrf(:,is_sic).GT.EPSFRA)
1187	seaice=917.
1188	END WHERE
1189	END IF
1190	END IF !sea ice INT
1191	END IF ! Slab
1192
1193	! on ferme le fichier
1194	CALL close_startphy
1195
1196	! Initialize module pbl_surface_mod
1197
1198	CALL pbl_surface_init(qsol, fder, snow, qsurf, &
1199	evap, frugs, agesno, tsoil)
1200
1201	! Initialize module ocean_cpl_mod for the case of coupled ocean
1202	IF ( type_ocean == 'couple' ) THEN
1203	CALL ocean_cpl_init(dtime, rlon, rlat)
1204	ENDIF
1205
1206	CALL init_iophy_new(rlat, rlon)
1207
1208	! Initilialize module fonte_neige_mod
1209	CALL fonte_neige_init(run_off_lic_0)
1210
1211	END SUBROUTINE phyetat0

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format