source: LMDZ5/trunk/libf/phylmd/ocean_forced_mod.F90 @ 2390

Last change on this file since 2390 was 2254, checked in by fhourdin, 10 years ago

Modification du calcul des flux air/mer
1) Introduction d'un facteur f_qsat_oce=0.98 devant qsat dans le calcul
de l'évaporation sur océan pour tenir compte de la moindre évaporation
de l'eau salée.
2) Introduction d'une différentiation entre z0 pour le sensible, z0h,
et le latent, z0q, imposé constant z0q=f_z0qh_oce*z0h

Modification of air/sea fluxes computation
1) Introduction of a correcting factor f_qsat_oce=0.98 on qsat
to account for the weaker evaporation of salty water.
2) Introduction of z0q=f_z0qh_oce*z0h
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
  • Property svn:eol-style set to native
  • Property svn:executable set to *
  • Property svn:keywords set to Author Date Id Revision
File size: 11.5 KB
Line 
1!
2MODULE ocean_forced_mod
3!
4! This module is used for both the sub-surfaces ocean and sea-ice for the case of a
5! forced ocean,  "ocean=force".
6!
7  IMPLICIT NONE
8
9CONTAINS
10!
11!****************************************************************************************
12!
13  SUBROUTINE ocean_forced_noice( &
14       itime, dtime, jour, knon, knindex, &
15       p1lay, cdragh, cdragq, cdragm, precip_rain, precip_snow, &
16       temp_air, spechum, &
17       AcoefH, AcoefQ, BcoefH, BcoefQ, &
18       AcoefU, AcoefV, BcoefU, BcoefV, &
19       ps, u1, v1, gustiness, &
20       radsol, snow, agesno, &
21       qsurf, evap, fluxsens, fluxlat, flux_u1, flux_v1, &
22       tsurf_new, dflux_s, dflux_l)
23!
24! This subroutine treats the "open ocean", all grid points that are not entierly covered
25! by ice.
26! The routine receives data from climatologie file limit.nc and does some calculations at the
27! surface.
28!
29    USE dimphy
30    USE calcul_fluxs_mod
31    USE limit_read_mod
32    USE mod_grid_phy_lmdz
33    USE indice_sol_mod
34    INCLUDE "YOMCST.h"
35    INCLUDE "clesphys.h"
36
37
38! Input arguments
39!****************************************************************************************
40    INTEGER, INTENT(IN)                      :: itime, jour, knon
41    INTEGER, DIMENSION(klon), INTENT(IN)     :: knindex
42    REAL, INTENT(IN)                         :: dtime
43    REAL, DIMENSION(klon), INTENT(IN)        :: p1lay
44    REAL, DIMENSION(klon), INTENT(IN)        :: cdragh, cdragq, cdragm
45    REAL, DIMENSION(klon), INTENT(IN)        :: precip_rain, precip_snow
46    REAL, DIMENSION(klon), INTENT(IN)        :: temp_air, spechum
47    REAL, DIMENSION(klon), INTENT(IN)        :: AcoefH, AcoefQ, BcoefH, BcoefQ
48    REAL, DIMENSION(klon), INTENT(IN)        :: AcoefU, AcoefV, BcoefU, BcoefV
49    REAL, DIMENSION(klon), INTENT(IN)        :: ps
50    REAL, DIMENSION(klon), INTENT(IN)        :: u1, v1, gustiness
51
52! In/Output arguments
53!****************************************************************************************
54    REAL, DIMENSION(klon), INTENT(INOUT)     :: radsol
55    REAL, DIMENSION(klon), INTENT(INOUT)     :: snow
56    REAL, DIMENSION(klon), INTENT(INOUT)     :: agesno !? put to 0 in ocean
57 
58! Output arguments
59!****************************************************************************************
60    REAL, DIMENSION(klon), INTENT(OUT)       :: qsurf
61    REAL, DIMENSION(klon), INTENT(OUT)       :: evap, fluxsens, fluxlat
62    REAL, DIMENSION(klon), INTENT(OUT)       :: flux_u1, flux_v1
63    REAL, DIMENSION(klon), INTENT(OUT)       :: tsurf_new
64    REAL, DIMENSION(klon), INTENT(OUT)       :: dflux_s, dflux_l
65
66! Local variables
67!****************************************************************************************
68    INTEGER                     :: i
69    REAL, DIMENSION(klon)       :: cal, beta, dif_grnd
70    REAL, DIMENSION(klon)       :: alb_neig, tsurf_lim, zx_sl
71    REAL, DIMENSION(klon)       :: u0, v0
72    REAL, DIMENSION(klon)       :: u1_lay, v1_lay
73    LOGICAL                     :: check=.FALSE.
74
75!****************************************************************************************
76! Start calculation
77!****************************************************************************************
78    IF (check) WRITE(*,*)' Entering ocean_forced_noice'
79   
80!****************************************************************************************
81! 1)   
82! Read sea-surface temperature from file limit.nc
83!
84!****************************************************************************************
85!--sb:
86!!jyg    if (knon.eq.1) then ! single-column model
87    if (klon_glo.eq.1) then ! single-column model
88      CALL read_tsurf1d(knon,tsurf_lim) ! new
89    else ! GCM
90      CALL limit_read_sst(knon,knindex,tsurf_lim)
91    endif ! knon
92!sb--
93
94!****************************************************************************************
95! 2)
96! Flux calculation
97!
98!****************************************************************************************
99! Set some variables for calcul_fluxs
100    cal = 0.
101    beta = 1.
102    dif_grnd = 0.
103    alb_neig(:) = 0.
104    agesno(:) = 0.
105! Suppose zero surface speed
106    u0(:)=0.0
107    v0(:)=0.0
108    u1_lay(:) = u1(:) - u0(:)
109    v1_lay(:) = v1(:) - v0(:)
110
111! Calcul de tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l and qsurf
112    CALL calcul_fluxs(knon, is_oce, dtime, &
113         tsurf_lim, p1lay, cal, beta, cdragh, cdragq, ps, &
114         precip_rain, precip_snow, snow, qsurf,  &
115         radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, &
116         f_qsat_oce,AcoefH, AcoefQ, BcoefH, BcoefQ, &
117         tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l)
118
119! - Flux calculation at first modele level for U and V
120    CALL calcul_flux_wind(knon, dtime, &
121         u0, v0, u1, v1, gustiness, cdragm, &
122         AcoefU, AcoefV, BcoefU, BcoefV, &
123         p1lay, temp_air, &
124         flux_u1, flux_v1) 
125
126  END SUBROUTINE ocean_forced_noice
127!
128!***************************************************************************************
129!
130  SUBROUTINE ocean_forced_ice( &
131       itime, dtime, jour, knon, knindex, &
132       tsurf_in, p1lay, cdragh, cdragm, precip_rain, precip_snow, temp_air, spechum, &
133       AcoefH, AcoefQ, BcoefH, BcoefQ, &
134       AcoefU, AcoefV, BcoefU, BcoefV, &
135       ps, u1, v1, gustiness, &
136       radsol, snow, qsol, agesno, tsoil, &
137       qsurf, alb1_new, alb2_new, evap, fluxsens, fluxlat, flux_u1, flux_v1, &
138       tsurf_new, dflux_s, dflux_l)
139!
140! This subroutine treats the ocean where there is ice.
141! The routine reads data from climatologie file and does flux calculations at the
142! surface.
143!
144    USE dimphy
145    USE calcul_fluxs_mod
146    USE surface_data,     ONLY : calice, calsno, tau_gl
147    USE limit_read_mod
148    USE fonte_neige_mod,  ONLY : fonte_neige
149    USE indice_sol_mod
150
151!    INCLUDE "indicesol.h"
152    INCLUDE "dimsoil.h"
153    INCLUDE "YOMCST.h"
154    INCLUDE "clesphys.h"
155
156! Input arguments
157!****************************************************************************************
158    INTEGER, INTENT(IN)                  :: itime, jour, knon
159    INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
160    REAL, INTENT(IN)                     :: dtime
161    REAL, DIMENSION(klon), INTENT(IN)    :: tsurf_in
162    REAL, DIMENSION(klon), INTENT(IN)    :: p1lay
163    REAL, DIMENSION(klon), INTENT(IN)    :: cdragh, cdragm
164    REAL, DIMENSION(klon), INTENT(IN)    :: precip_rain, precip_snow
165    REAL, DIMENSION(klon), INTENT(IN)    :: temp_air, spechum
166    REAL, DIMENSION(klon), INTENT(IN)    :: AcoefH, AcoefQ, BcoefH, BcoefQ
167    REAL, DIMENSION(klon), INTENT(IN)    :: AcoefU, AcoefV, BcoefU, BcoefV
168    REAL, DIMENSION(klon), INTENT(IN)    :: ps
169    REAL, DIMENSION(klon), INTENT(IN)    :: u1, v1, gustiness
170
171! In/Output arguments
172!****************************************************************************************
173    REAL, DIMENSION(klon), INTENT(INOUT)          :: radsol
174    REAL, DIMENSION(klon), INTENT(INOUT)          :: snow, qsol
175    REAL, DIMENSION(klon), INTENT(INOUT)          :: agesno
176    REAL, DIMENSION(klon, nsoilmx), INTENT(INOUT) :: tsoil
177
178! Output arguments
179!****************************************************************************************
180    REAL, DIMENSION(klon), INTENT(OUT)            :: qsurf
181    REAL, DIMENSION(klon), INTENT(OUT)            :: alb1_new  ! new albedo in visible SW interval
182    REAL, DIMENSION(klon), INTENT(OUT)            :: alb2_new  ! new albedo in near IR interval
183    REAL, DIMENSION(klon), INTENT(OUT)            :: evap, fluxsens, fluxlat
184    REAL, DIMENSION(klon), INTENT(OUT)            :: flux_u1, flux_v1
185    REAL, DIMENSION(klon), INTENT(OUT)            :: tsurf_new
186    REAL, DIMENSION(klon), INTENT(OUT)            :: dflux_s, dflux_l     
187
188! Local variables
189!****************************************************************************************
190    LOGICAL                     :: check=.FALSE.
191    INTEGER                     :: i
192    REAL                        :: zfra
193    REAL, PARAMETER             :: t_grnd=271.35
194    REAL, DIMENSION(klon)       :: cal, beta, dif_grnd, capsol
195    REAL, DIMENSION(klon)       :: alb_neig, tsurf_tmp
196    REAL, DIMENSION(klon)       :: soilcap, soilflux
197    REAL, DIMENSION(klon)       :: u0, v0
198    REAL, DIMENSION(klon)       :: u1_lay, v1_lay
199
200!****************************************************************************************
201! Start calculation
202!****************************************************************************************
203    IF (check) WRITE(*,*)'Entering surface_seaice, knon=',knon
204
205!****************************************************************************************
206! 1)
207! Flux calculation : tsurf_new, evap, fluxlat, fluxsens, flux_u1, flux_v1
208!                    dflux_s, dflux_l and qsurf
209!****************************************************************************************
210    tsurf_tmp(:) = tsurf_in(:)
211
212! calculate the parameters cal, beta, capsol and dif_grnd
213    CALL calbeta(dtime, is_sic, knon, snow, qsol, beta, capsol, dif_grnd)
214
215   
216    IF (soil_model) THEN
217! update tsoil and calculate soilcap and soilflux
218       CALL soil(dtime, is_sic, knon, snow, tsurf_tmp, tsoil,soilcap, soilflux)
219       cal(1:knon) = RCPD / soilcap(1:knon)
220       radsol(1:knon) = radsol(1:knon)  + soilflux(1:knon)
221       dif_grnd = 1.0 / tau_gl
222    ELSE
223       dif_grnd = 1.0 / tau_gl
224       cal = RCPD * calice
225       WHERE (snow > 0.0) cal = RCPD * calsno
226    ENDIF
227
228    beta = 1.0
229! Suppose zero surface speed
230    u0(:)=0.0
231    v0(:)=0.0
232    u1_lay(:) = u1(:) - u0(:)
233    v1_lay(:) = v1(:) - v0(:)
234    CALL calcul_fluxs(knon, is_sic, dtime, &
235         tsurf_tmp, p1lay, cal, beta, cdragh, cdragh, ps, &
236         precip_rain, precip_snow, snow, qsurf,  &
237         radsol, dif_grnd, temp_air, spechum, u1_lay, v1_lay, gustiness, &
238         f_qsat_oce,AcoefH, AcoefQ, BcoefH, BcoefQ, &
239         tsurf_new, evap, fluxlat, fluxsens, dflux_s, dflux_l)
240
241! - Flux calculation at first modele level for U and V
242    CALL calcul_flux_wind(knon, dtime, &
243         u0, v0, u1, v1, gustiness, cdragm, &
244         AcoefU, AcoefV, BcoefU, BcoefV, &
245         p1lay, temp_air, &
246         flux_u1, flux_v1) 
247
248!****************************************************************************************
249! 2)
250! Calculations due to snow and runoff
251!
252!****************************************************************************************
253    CALL fonte_neige( knon, is_sic, knindex, dtime, &
254         tsurf_tmp, precip_rain, precip_snow, &
255         snow, qsol, tsurf_new, evap)
256   
257! Calculation of albedo at snow (alb_neig) and update the age of snow (agesno)
258!
259    CALL albsno(klon, knon, dtime, agesno(:), alb_neig(:), precip_snow(:)) 
260
261    WHERE (snow(1:knon) .LT. 0.0001) agesno(1:knon) = 0.
262
263    alb1_new(:) = 0.0
264    DO i=1, knon
265       zfra = MAX(0.0,MIN(1.0,snow(i)/(snow(i)+10.0)))
266       alb1_new(i) = alb_neig(i) * zfra +  0.6 * (1.0-zfra)
267    ENDDO
268
269    alb2_new(:) = alb1_new(:)
270
271  END SUBROUTINE ocean_forced_ice
272
273!************************************************************************
274! 1D case
275!************************************************************************
276  SUBROUTINE read_tsurf1d(knon,sst_out)
277
278! This subroutine specifies the surface temperature to be used in 1D simulations
279
280      USE dimphy, ONLY : klon
281
282      INTEGER, INTENT(IN)                  :: knon     ! nomber of points on compressed grid
283      REAL, DIMENSION(klon), INTENT(OUT)   :: sst_out  ! tsurf used to force the single-column model
284
285       INTEGER :: i
286! COMMON defined in lmdz1d.F:
287       real ts_cur
288       common /sst_forcing/ts_cur
289
290       DO i = 1, knon
291        sst_out(i) = ts_cur
292       ENDDO
293
294      END SUBROUTINE read_tsurf1d
295
296!
297!************************************************************************
298!
299END MODULE ocean_forced_mod
300
301
302
303
304
305
Note: See TracBrowser for help on using the repository browser.