Context Navigation

lmdz1d.F90 @ 2786

Last change on this file since 2786 was 2786, checked in by Ehouarn Millour, 7 years ago

Further convergence with planetary models:

move vertical_layers_mod.F90 to phy_common and call init_vertical_layers in inigeomphy_mod
add aps and bps (mid-layer coordinates) to vertical_layers_mod.F90
same adaptations for the 1D case

File size: 46.5 KB

Line
1	!#ifdef CPP_1D
2	!#include "../dyn3d/mod_const_mpi.F90"
3	!#include "../dyn3d_common/control_mod.F90"
4	!#include "../dyn3d_common/infotrac.F90"
5	!#include "../dyn3d_common/disvert.F90"
6
7
8	PROGRAM lmdz1d
9
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
21	zgam, zmax0, zmea, zpic, zsig, &
22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
23
24	USE dimphy
25	USE surface_data, only : type_ocean,ok_veget
26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
27	pbl_surface_final
28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
29
30	USE infotrac ! new
31	USE control_mod
32	USE indice_sol_mod
33	USE phyaqua_mod
34	! USE mod_1D_cases_read
35	USE mod_1D_cases_read2
36	USE mod_1D_amma_read
37	USE print_control_mod, ONLY: lunout, prt_level
38	USE iniphysiq_mod, ONLY: iniphysiq
39	USE mod_const_mpi, ONLY: comm_lmdz
40	USE physiq_mod, ONLY: physiq
41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
42	preff, aps, bps, pseudoalt, scaleheight
43	USE vertical_layers_mod, ONLY: init_vertical_layers
44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
45	itau_dyn, itau_phy, start_time
46
47	implicit none
48	#include "dimensions.h"
49	#include "YOMCST.h"
50	!!#include "control.h"
51	#include "clesphys.h"
52	#include "dimsoil.h"
53	!#include "indicesol.h"
54
55	#include "compar1d.h"
56	#include "flux_arp.h"
57	#include "date_cas.h"
58	#include "tsoilnudge.h"
59	#include "fcg_gcssold.h"
60	!!!#include "fbforcing.h"
61	#include "compbl.h"
62
63	!=====================================================================
64	! DECLARATIONS
65	!=====================================================================
66
67	!---------------------------------------------------------------------
68	! Externals
69	!---------------------------------------------------------------------
70	external fq_sat
71	real fq_sat
72
73	!---------------------------------------------------------------------
74	! Arguments d' initialisations de la physique (USER DEFINE)
75	!---------------------------------------------------------------------
76
77	integer, parameter :: ngrid=1
78	real :: zcufi = 1.
79	real :: zcvfi = 1.
80
81	!- real :: nat_surf
82	!- logical :: ok_flux_surf
83	!- real :: fsens
84	!- real :: flat
85	!- real :: tsurf
86	!- real :: rugos
87	!- real :: qsol(1:2)
88	!- real :: qsurf
89	!- real :: psurf
90	!- real :: zsurf
91	!- real :: albedo
92	!-
93	!- real :: time = 0.
94	!- real :: time_ini
95	!- real :: xlat
96	!- real :: xlon
97	!- real :: wtsurf
98	!- real :: wqsurf
99	!- real :: restart_runoff
100	!- real :: xagesno
101	!- real :: qsolinp
102	!- real :: zpicinp
103	!-
104	real :: fnday
105	real :: day, daytime
106	real :: day1
107	real :: heure
108	integer :: jour
109	integer :: mois
110	integer :: an
111
112	!---------------------------------------------------------------------
113	! Declarations related to forcing and initial profiles
114	!---------------------------------------------------------------------
115
116	integer :: kmax = llm
117	integer llm700,nq1,nq2
118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
119	real timestep, frac
120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
124	real dqtdtls(nlev_max),thlpcar(nlev_max)
125	real qprof(nlev_max,nqmx)
126
127	! integer :: forcing_type
128	logical :: forcing_les = .false.
129	logical :: forcing_armcu = .false.
130	logical :: forcing_rico = .false.
131	logical :: forcing_radconv = .false.
132	logical :: forcing_toga = .false.
133	logical :: forcing_twpice = .false.
134	logical :: forcing_amma = .false.
135	logical :: forcing_dice = .false.
136	logical :: forcing_gabls4 = .false.
137
138	logical :: forcing_GCM2SCM = .false.
139	logical :: forcing_GCSSold = .false.
140	logical :: forcing_sandu = .false.
141	logical :: forcing_astex = .false.
142	logical :: forcing_fire = .false.
143	logical :: forcing_case = .false.
144	logical :: forcing_case2 = .false.
145	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
146	! (cf read_tsurf1d.F)
147
148	!vertical advection computation
149	! real d_t_z(llm), d_q_z(llm)
150	! real d_t_dyn_z(llm), dq_dyn_z(llm)
151	! real zz(llm)
152	! real zfact
153
154	!flag forcings
155	logical :: nudge_wind=.true.
156	logical :: nudge_thermo=.false.
157	logical :: cptadvw=.true.
158	!=====================================================================
159	! DECLARATIONS FOR EACH CASE
160	!=====================================================================
161	!
162	#include "1D_decl_cases.h"
163	!
164	!---------------------------------------------------------------------
165	! Declarations related to nudging
166	!---------------------------------------------------------------------
167	integer :: nudge_max
168	parameter (nudge_max=9)
169	integer :: inudge_RHT=1
170	integer :: inudge_UV=2
171	logical :: nudge(nudge_max)
172	real :: t_targ(llm)
173	real :: rh_targ(llm)
174	real :: u_targ(llm)
175	real :: v_targ(llm)
176	!
177	!---------------------------------------------------------------------
178	! Declarations related to vertical discretization:
179	!---------------------------------------------------------------------
180	real :: pzero=1.e5
181	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
182	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
183
184	!---------------------------------------------------------------------
185	! Declarations related to variables
186	!---------------------------------------------------------------------
187
188	real :: phi(llm)
189	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
190	REAL rot(1, llm) ! relative vorticity, in s-1
191	real :: rlat_rad(1),rlon_rad(1)
192	real :: omega(llm+1),omega2(llm),rho(llm+1)
193	real :: ug(llm),vg(llm),fcoriolis
194	real :: sfdt, cfdt
195	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
196	real :: dt_dyn(llm)
197	real :: dt_cooling(llm),d_t_adv(llm),d_th_adv(llm),d_t_nudge(llm)
198	real :: d_u_nudge(llm),d_v_nudge(llm)
199	real :: du_adv(llm),dv_adv(llm)
200	real :: du_age(llm),dv_age(llm)
201	real :: alpha
202	real :: ttt
203
204	REAL, ALLOCATABLE, DIMENSION(:,:):: q
205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
206	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
208	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
209	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
210
211	!---------------------------------------------------------------------
212	! Initialization of surface variables
213	!---------------------------------------------------------------------
214	real :: run_off_lic_0(1)
215	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
216	real :: tsoil(1,nsoilmx,nbsrf)
217	! real :: agesno(1,nbsrf)
218
219	!---------------------------------------------------------------------
220	! Call to phyredem
221	!---------------------------------------------------------------------
222	logical :: ok_writedem =.true.
223	real :: sollw_in = 0.
224	real :: solsw_in = 0.
225
226	!---------------------------------------------------------------------
227	! Call to physiq
228	!---------------------------------------------------------------------
229	logical :: firstcall=.true.
230	logical :: lastcall=.false.
231	real :: phis(1) = 0.0
232	real :: dpsrf(1)
233
234	!---------------------------------------------------------------------
235	! Initializations of boundary conditions
236	!---------------------------------------------------------------------
237	integer, parameter :: yd = 360
238	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
239	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
240	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
241	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
242	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
243	real :: phy_ice (yd) = 0.0 ! Fraction de glace
244	real :: phy_fter(yd) = 0.0 ! Fraction de terre
245	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
246	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
247	real :: phy_flic(yd) = 0.0 ! Fraction de glace
248
249	!---------------------------------------------------------------------
250	! Fichiers et d'autres variables
251	!---------------------------------------------------------------------
252	integer :: k,l,i,it=1,mxcalc
253	integer :: nsrf
254	integer jcode
255	INTEGER read_climoz
256	!
257	integer :: it_end ! iteration number of the last call
258	!Al1
259	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
260	data ecrit_slab_oc/-1/
261	!
262	! if flag_inhib_forcing = 0, tendencies of forcing are added
263	! <> 0, tendencies of forcing are not added
264	INTEGER :: flag_inhib_forcing = 0
265
266	!=====================================================================
267	! INITIALIZATIONS
268	!=====================================================================
269	du_phys(:)=0.
270	dv_phys(:)=0.
271	dt_phys(:)=0.
272	dt_dyn(:)=0.
273	dt_cooling(:)=0.
274	d_th_adv(:)=0.
275	d_t_nudge(:)=0.
276	d_u_nudge(:)=0.
277	d_v_nudge(:)=0.
278	du_adv(:)=0.
279	dv_adv(:)=0.
280	du_age(:)=0.
281	dv_age(:)=0.
282
283	! Initialization of Common turb_forcing
284	dtime_frcg = 0.
285	Turb_fcg_gcssold=.false.
286	hthturb_gcssold = 0.
287	hqturb_gcssold = 0.
288
289	!---------------------------------------------------------------------
290	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
291	!---------------------------------------------------------------------
292	!Al1
293	call conf_unicol
294	!Al1 moves this gcssold var from common fcg_gcssold to
295	Turb_fcg_gcssold = xTurb_fcg_gcssold
296	! --------------------------------------------------------------------
297	close(1)
298	!Al1
299	write(,) 'lmdz1d.def lu => unicol.def'
300
301	! forcing_type defines the way the SCM is forced:
302	!forcing_type = 0 ==> forcing_les = .true.
303	! initial profiles from file prof.inp.001
304	! no forcing by LS convergence ;
305	! surface temperature imposed ;
306	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
307	!forcing_type = 1 ==> forcing_radconv = .true.
308	! idem forcing_type = 0, but the imposed radiative cooling
309	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
310	! then there is no radiative cooling at all)
311	!forcing_type = 2 ==> forcing_toga = .true.
312	! initial profiles from TOGA-COARE IFA files
313	! LS convergence and SST imposed from TOGA-COARE IFA files
314	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
315	! initial profiles from the GCM output
316	! LS convergence imposed from the GCM output
317	!forcing_type = 4 ==> forcing_twpice = .true.
318	! initial profiles from TWP-ICE cdf file
319	! LS convergence, omega and SST imposed from TWP-ICE files
320	!forcing_type = 5 ==> forcing_rico = .true.
321	! initial profiles from RICO files
322	! LS convergence imposed from RICO files
323	!forcing_type = 6 ==> forcing_amma = .true.
324	! initial profiles from AMMA nc file
325	! LS convergence, omega and surface fluxes imposed from AMMA file
326	!forcing_type = 7 ==> forcing_dice = .true.
327	! initial profiles and large scale forcings in dice_driver.nc
328	! Different stages: soil model alone, atm. model alone
329	! then both models coupled
330	!forcing_type = 8 ==> forcing_gabls4 = .true.
331	! initial profiles and large scale forcings in gabls4_driver.nc
332	!forcing_type >= 100 ==> forcing_case = .true.
333	! initial profiles and large scale forcings in cas.nc
334	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
335	! 101=cindynamo
336	! 102=bomex
337	!forcing_type >= 100 ==> forcing_case2 = .true.
338	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
339	! 103=arm_cu2 ie arm_cu with new forcing format
340	! 104=rico2 ie rico with new forcing format
341	!forcing_type = 40 ==> forcing_GCSSold = .true.
342	! initial profile from GCSS file
343	! LS convergence imposed from GCSS file
344	!forcing_type = 50 ==> forcing_fire = .true.
345	! forcing from fire.nc
346	!forcing_type = 59 ==> forcing_sandu = .true.
347	! initial profiles from sanduref file: see prof.inp.001
348	! SST varying with time and divergence constante: see ifa_sanduref.txt file
349	! Radiation has to be computed interactively
350	!forcing_type = 60 ==> forcing_astex = .true.
351	! initial profiles from file: see prof.inp.001
352	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
353	! Radiation has to be computed interactively
354	!forcing_type = 61 ==> forcing_armcu = .true.
355	! initial profiles from file: see prof.inp.001
356	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
357	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
358	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
359	! Radiation to be switched off
360	!
361	if (forcing_type .eq.0) THEN
362	forcing_les = .true.
363	elseif (forcing_type .eq.1) THEN
364	forcing_radconv = .true.
365	elseif (forcing_type .eq.2) THEN
366	forcing_toga = .true.
367	elseif (forcing_type .eq.3) THEN
368	forcing_GCM2SCM = .true.
369	elseif (forcing_type .eq.4) THEN
370	forcing_twpice = .true.
371	elseif (forcing_type .eq.5) THEN
372	forcing_rico = .true.
373	elseif (forcing_type .eq.6) THEN
374	forcing_amma = .true.
375	elseif (forcing_type .eq.7) THEN
376	forcing_dice = .true.
377	elseif (forcing_type .eq.8) THEN
378	forcing_gabls4 = .true.
379	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
380	forcing_case = .true.
381	year_ini_cas=2011
382	mth_ini_cas=10
383	day_deb=1
384	heure_ini_cas=0.
385	pdt_cas=3*3600. ! forcing frequency
386	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
387	forcing_case = .true.
388	year_ini_cas=1969
389	mth_ini_cas=6
390	day_deb=24
391	heure_ini_cas=0.
392	pdt_cas=1800. ! forcing frequency
393	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
394	forcing_case2 = .true.
395	year_ini_cas=1997
396	mth_ini_cas=6
397	day_deb=21
398	heure_ini_cas=11.5
399	pdt_cas=1800. ! forcing frequency
400	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
401	forcing_case2 = .true.
402	year_ini_cas=2004
403	mth_ini_cas=12
404	day_deb=16
405	heure_ini_cas=0.
406	pdt_cas=1800. ! forcing frequency
407	elseif (forcing_type .eq.40) THEN
408	forcing_GCSSold = .true.
409	elseif (forcing_type .eq.50) THEN
410	forcing_fire = .true.
411	elseif (forcing_type .eq.59) THEN
412	forcing_sandu = .true.
413	elseif (forcing_type .eq.60) THEN
414	forcing_astex = .true.
415	elseif (forcing_type .eq.61) THEN
416	forcing_armcu = .true.
417	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
418	else
419	write (,) 'ERROR : unknown forcing_type ', forcing_type
420	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
421	ENDIF
422	print*,"forcing type=",forcing_type
423
424	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
425	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
426	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
427	! through the common sst_forcing.
428
429	type_ts_forcing = 0
430	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
431	& type_ts_forcing = 1
432	!
433	! Initialization of the logical switch for nudging
434	jcode = iflag_nudge
435	do i = 1,nudge_max
436	nudge(i) = mod(jcode,10) .ge. 1
437	jcode = jcode/10
438	enddo
439	!---------------------------------------------------------------------
440	! Definition of the run
441	!---------------------------------------------------------------------
442
443	call conf_gcm( 99, .TRUE. )
444	!-----------------------------------------------------------------------
445	! Choix du calendrier
446	! -------------------
447
448	! calend = 'earth_365d'
449	if (calend == 'earth_360d') then
450	call ioconf_calendar('360d')
451	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
452	else if (calend == 'earth_365d') then
453	call ioconf_calendar('noleap')
454	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
455	else if (calend == 'earth_366d') then
456	call ioconf_calendar('all_leap')
457	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
458	else if (calend == 'gregorian') then
459	call ioconf_calendar('gregorian') ! not to be used by normal users
460	write(,)'CALENDRIER CHOISI: Gregorien'
461	else
462	write (,) 'ERROR : unknown calendar ', calend
463	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
464	endif
465	!-----------------------------------------------------------------------
466	!
467	!c Date :
468	! La date est supposee donnee sous la forme [annee, numero du jour dans
469	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
470	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
471	! Le numero du jour est dans "day". L heure est traitee separement.
472	! La date complete est dans "daytime" (l'unite est le jour).
473	if (nday>0) then
474	fnday=nday
475	else
476	fnday=-nday/float(day_step)
477	endif
478	print *,'fnday=',fnday
479	! start_time doit etre en FRACTION DE JOUR
480	start_time=time_ini/24.
481
482	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
483	IF(forcing_type .EQ. 61) fnday=53100./86400.
484	IF(forcing_type .EQ. 103) fnday=53100./86400.
485	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
486	IF(forcing_type .EQ. 6) fnday=64800./86400.
487	! IF(forcing_type .EQ. 6) fnday=50400./86400.
488	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
489	annee_ref = anneeref
490	mois = 1
491	day_ref = dayref
492	heure = 0.
493	itau_dyn = 0
494	itau_phy = 0
495	call ymds2ju(annee_ref,mois,day_ref,heure,day)
496	day_ini = int(day)
497	day_end = day_ini + fnday
498
499	IF (forcing_type .eq.2) THEN
500	! Convert the initial date of Toga-Coare to Julian day
501	call ymds2ju &
502	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
503
504	ELSEIF (forcing_type .eq.4) THEN
505	! Convert the initial date of TWPICE to Julian day
506	call ymds2ju &
507	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
508	& ,day_ju_ini_twpi)
509	ELSEIF (forcing_type .eq.6) THEN
510	! Convert the initial date of AMMA to Julian day
511	call ymds2ju &
512	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
513	& ,day_ju_ini_amma)
514	ELSEIF (forcing_type .eq.7) THEN
515	! Convert the initial date of DICE to Julian day
516	call ymds2ju &
517	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
518	& ,day_ju_ini_dice)
519	ELSEIF (forcing_type .eq.8 ) THEN
520	! Convert the initial date of GABLS4 to Julian day
521	call ymds2ju &
522	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
523	& ,day_ju_ini_gabls4)
524	ELSEIF (forcing_type .gt.100) THEN
525	! Convert the initial date to Julian day
526	day_ini_cas=day_deb
527	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
528	call ymds2ju &
529	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
530	& ,day_ju_ini_cas)
531	print*,'time case 2',day_ini_cas,day_ju_ini_cas
532	ELSEIF (forcing_type .eq.59) THEN
533	! Convert the initial date of Sandu case to Julian day
534	call ymds2ju &
535	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
536	& time_ini*3600.,day_ju_ini_sandu)
537
538	ELSEIF (forcing_type .eq.60) THEN
539	! Convert the initial date of Astex case to Julian day
540	call ymds2ju &
541	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
542	& time_ini*3600.,day_ju_ini_astex)
543
544	ELSEIF (forcing_type .eq.61) THEN
545	! Convert the initial date of Arm_cu case to Julian day
546	call ymds2ju &
547	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
548	& ,day_ju_ini_armcu)
549	ENDIF
550
551	IF (forcing_type .gt.100) THEN
552	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
553	ELSE
554	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
555	ENDIF
556	! Print out the actual date of the beginning of the simulation :
557	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
558	print *,' Time of beginning : ', &
559	& year_print, month_print, day_print, sec_print
560
561	!---------------------------------------------------------------------
562	! Initialization of dimensions, geometry and initial state
563	!---------------------------------------------------------------------
564	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
565	! but we still need to initialize dimphy module (klon,klev,etc.) here.
566	call init_dimphy(1,llm)
567	call suphel
568	call infotrac_init
569
570	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
571	allocate(q(llm,nqtot)) ; q(:,:)=0.
572	allocate(dq(llm,nqtot))
573	allocate(dq_dyn(llm,nqtot))
574	allocate(d_q_adv(llm,nqtot))
575	allocate(d_q_nudge(llm,nqtot))
576	! allocate(d_th_adv(llm))
577
578	q(:,:) = 0.
579	dq(:,:) = 0.
580	dq_dyn(:,:) = 0.
581	d_q_adv(:,:) = 0.
582	d_q_nudge(:,:) = 0.
583
584	!
585	! No ozone climatology need be read in this pre-initialization
586	! (phys_state_var_init is called again in physiq)
587	read_climoz = 0
588	!
589	call phys_state_var_init(read_climoz)
590
591	if (ngrid.ne.klon) then
592	print*,'stop in inifis'
593	print*,'Probleme de dimensions :'
594	print*,'ngrid = ',ngrid
595	print*,'klon = ',klon
596	stop
597	endif
598	!!!=====================================================================
599	!!! Feedback forcing values for Gateaux differentiation (al1)
600	!!!=====================================================================
601	!!! Surface Planck forcing bracketing call radiation
602	!! surf_Planck = 0.
603	!! surf_Conv = 0.
604	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
605	!!! a mettre dans le lmdz1d.def ou autre
606	!!
607	!!
608	qsol = qsolinp
609	qsurf = fq_sat(tsurf,psurf/100.)
610	day1= day_ini
611	time=daytime-day
612	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
613	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
614
615	!
616	!! mpl et jyg le 22/08/2012 :
617	!! pour que les cas a flux de surface imposes marchent
618	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
619	fsens=-wtsurfrcpdrho(1)
620	flat=-wqsurfrlvttrho(1)
621	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
622	ENDIF
623	print*,'Flux sol ',fsens,flat
624	!! ok_flux_surf=.false.
625	!! fsens=-wtsurfrcpdrho(1)
626	!! flat=-wqsurfrlvttrho(1)
627	!!!!
628
629	! Vertical discretization and pressure levels at half and mid levels:
630
631	pa = 5e4
632	!! preff= 1.01325e5
633	preff = psurf
634	IF (ok_old_disvert) THEN
635	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
636	print *,'On utilise disvert0'
637	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
638	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
639	scaleheight=8.
640	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
641	ELSE
642	call disvert()
643	print *,'On utilise disvert'
644	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
645	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
646	ENDIF
647	! initialize ap,bp, etc. in vertical_layers_mod
648	CALL init_vertical_layers(llm,preff,scaleheight, &
649	ap,bp,aps,bps,presnivs,pseudoalt)
650
651	sig_s=presnivs/preff
652	plev =ap+bp*psurf
653	play = 0.5*(plev(1:llm)+plev(2:llm+1))
654	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
655
656	IF (forcing_type .eq. 59) THEN
657	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
658	write(,) '***********************'
659	do l = 1, llm
660	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
661	if (trouve_700 .and. play(l).le.70000) then
662	llm700=l
663	print *,'llm700,play=',llm700,play(l)/100.
664	trouve_700= .false.
665	endif
666	enddo
667	write(,) '***********************'
668	ENDIF
669
670	!
671	!=====================================================================
672	! EVENTUALLY, READ FORCING DATA :
673	!=====================================================================
674
675	#include "1D_read_forc_cases.h"
676
677	if (forcing_GCM2SCM) then
678	write (,) 'forcing_GCM2SCM not yet implemented'
679	stop 'in initialization'
680	endif ! forcing_GCM2SCM
681
682	print*,'mxcalc=',mxcalc
683	! print*,'zlay=',zlay(mxcalc)
684	print*,'play=',play(mxcalc)
685
686	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
687	ts_cur = tsurf ! SST used in read_tsurf1d
688	!=====================================================================
689	! Initialisation de la physique :
690	!=====================================================================
691
692	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
693	!
694	! day_step, iphysiq lus dans gcm.def ci-dessus
695	! timestep: calcule ci-dessous from rday et day_step
696	! ngrid=1
697	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
698	! rday: defini dans suphel.F (86400.)
699	! day_ini: lu dans run.def (dayref)
700	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
701	! airefi,zcufi,zcvfi initialises au debut de ce programme
702	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
703	day_step = float(nsplit_phys)*day_step/float(iphysiq)
704	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
705	timestep =rday/day_step
706	dtime_frcg = timestep
707	!
708	zcufi=airefi
709	zcvfi=airefi
710	!
711	rlat_rad(1)=xlat*rpi/180.
712	rlon_rad(1)=xlon*rpi/180.
713
714	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
715	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
716	! with '0.' when necessary
717	call iniphysiq(iim,jjm,llm, &
718	1,comm_lmdz, &
719	rday,day_ini,timestep, &
720	(/rlat_rad(1),0./),(/0./), &
721	(/0.,0./),(/rlon_rad(1),0./), &
722	(/ (/airefi,0./),(/0.,0./) /), &
723	(/zcufi,0.,0.,0./), &
724	(/zcvfi,0./), &
725	ra,rg,rd,rcpd,1)
726	print*,'apres iniphysiq'
727
728	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
729	co2_ppm= 330.0
730	solaire=1370.0
731
732	! Ecriture du startphy avant le premier appel a la physique.
733	! On le met juste avant pour avoir acces a tous les champs
734
735	if (ok_writedem) then
736
737	!--------------------------------------------------------------------------
738	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
739	! need : qsol fder snow qsurf evap rugos agesno ftsoil
740	!--------------------------------------------------------------------------
741
742	type_ocean = "force"
743	run_off_lic_0(1) = restart_runoff
744	call fonte_neige_init(run_off_lic_0)
745
746	fder=0.
747	snsrf(1,:)=snowmass ! masse de neige des sous surface
748	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
749	fevap=0.
750	z0m(1,:)=rugos ! couverture de neige des sous surface
751	z0h(1,:)=rugosh ! couverture de neige des sous surface
752	agesno = xagesno
753	tsoil(:,:,:)=tsurf
754	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
755	! tsoil(1,1,1)=299.18
756	! tsoil(1,2,1)=300.08
757	! tsoil(1,3,1)=301.88
758	! tsoil(1,4,1)=305.48
759	! tsoil(1,5,1)=308.00
760	! tsoil(1,6,1)=308.00
761	! tsoil(1,7,1)=308.00
762	! tsoil(1,8,1)=308.00
763	! tsoil(1,9,1)=308.00
764	! tsoil(1,10,1)=308.00
765	! tsoil(1,11,1)=308.00
766	!-----------------------------------------------------------------------
767	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
768
769	!------------------ prepare limit conditions for limit.nc -----------------
770	!-- Ocean force
771
772	print*,'avant phyredem'
773	pctsrf(1,:)=0.
774	if (nat_surf.eq.0.) then
775	pctsrf(1,is_oce)=1.
776	pctsrf(1,is_ter)=0.
777	pctsrf(1,is_lic)=0.
778	pctsrf(1,is_sic)=0.
779	else if (nat_surf .eq. 1) then
780	pctsrf(1,is_oce)=0.
781	pctsrf(1,is_ter)=1.
782	pctsrf(1,is_lic)=0.
783	pctsrf(1,is_sic)=0.
784	else if (nat_surf .eq. 2) then
785	pctsrf(1,is_oce)=0.
786	pctsrf(1,is_ter)=0.
787	pctsrf(1,is_lic)=1.
788	pctsrf(1,is_sic)=0.
789	else if (nat_surf .eq. 3) then
790	pctsrf(1,is_oce)=0.
791	pctsrf(1,is_ter)=0.
792	pctsrf(1,is_lic)=0.
793	pctsrf(1,is_sic)=1.
794
795	end if
796
797
798	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
799	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
800
801	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
802	zpic = zpicinp
803	ftsol=tsurf
804	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
805	! 6 albedo, mais on peut quand meme tourner avec
806	! moins. Seules les 2 ou 4 premiers seront lus
807	falb_dir=albedo
808	falb_dif=albedo
809	rugoro=rugos
810	t_ancien(1,:)=temp(:)
811	q_ancien(1,:)=q(:,1)
812	!jyg<
813	!! pbl_tke(:,:,:)=1.e-8
814	pbl_tke(:,:,:)=0.
815	pbl_tke(:,2,:)=1.e-2
816	PRINT *, ' pbl_tke dans lmdz1d '
817	if (prt_level .ge. 5) then
818	DO nsrf = 1,4
819	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
820	ENDDO
821	end if
822
823	!>jyg
824
825	rain_fall=0.
826	snow_fall=0.
827	solsw=0.
828	sollw=0.
829	sollwdown=rsigmatsurf*4
830	radsol=0.
831	rnebcon=0.
832	ratqs=0.
833	clwcon=0.
834	zmax0 = 0.
835	zmea=0.
836	zstd=0.
837	zsig=0.
838	zgam=0.
839	zval=0.
840	zthe=0.
841	sig1=0.
842	w01=0.
843	wake_cstar = 0.
844	wake_deltaq = 0.
845	wake_deltat = 0.
846	wake_delta_pbl_TKE(:,:,:) = 0.
847	delta_tsurf = 0.
848	wake_fip = 0.
849	wake_pe = 0.
850	wake_s = 0.
851	wake_dens = 0.
852	ale_bl = 0.
853	ale_bl_trig = 0.
854	alp_bl = 0.
855	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
856	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
857	entr_therm = 0.
858	detr_therm = 0.
859	f0 = 0.
860	fm_therm = 0.
861	u_ancien(1,:)=u(:)
862	v_ancien(1,:)=v(:)
863
864	!------------------------------------------------------------------------
865	! Make file containing restart for the physics (startphy.nc)
866	!
867	! NB: List of the variables to be written by phyredem (via put_field):
868	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
869	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
870	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
871	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
872	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
873	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
874	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
875	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
876	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
877	!
878	! NB2: The content of the startphy.nc file depends on some flags defined in
879	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
880	! to be set at some arbitratry convenient values.
881	!------------------------------------------------------------------------
882	!Al1 =============== restart option ==========================
883	if (.not.restart) then
884	iflag_pbl = 5
885	call phyredem ("startphy.nc")
886	else
887	! (desallocations)
888	print*,'callin surf final'
889	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
890	print*,'after surf final'
891	CALL fonte_neige_final(run_off_lic_0)
892	endif
893
894	ok_writedem=.false.
895	print*,'apres phyredem'
896
897	endif ! ok_writedem
898
899	!------------------------------------------------------------------------
900	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
901	! --------------------------------------------------
902	! NB: List of the variables to be written in limit.nc
903	! (by writelim.F, subroutine of 1DUTILS.h):
904	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
905	! phy_fter,phy_foce,phy_flic,phy_fsic)
906	!------------------------------------------------------------------------
907	do i=1,yd
908	phy_nat(i) = nat_surf
909	phy_alb(i) = albedo
910	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
911	phy_rug(i) = rugos
912	phy_fter(i) = pctsrf(1,is_ter)
913	phy_foce(i) = pctsrf(1,is_oce)
914	phy_fsic(i) = pctsrf(1,is_sic)
915	phy_flic(i) = pctsrf(1,is_lic)
916	enddo
917
918	! fabrication de limit.nc
919	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
920	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
921
922
923	call phys_state_var_end
924	!Al1
925	if (restart) then
926	print*,'call to restart dyn 1d'
927	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
928	& u,v,temp,q,omega2)
929
930	print*,'fnday,annee_ref,day_ref,day_ini', &
931	& fnday,annee_ref,day_ref,day_ini
932	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
933	day = day_ini
934	day_end = day_ini + nday
935	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
936
937	! Print out the actual date of the beginning of the simulation :
938	call ju2ymds(daytime, an, mois, jour, heure)
939	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
940
941	day = int(daytime)
942	time=daytime-day
943
944	print,'*** intialised fields from restart1dyn *****'
945	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
946	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
947	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
948	! raz for safety
949	do l=1,llm
950	dq_dyn(l,1) = 0.
951	enddo
952	endif
953	!Al1 ================ end restart =================================
954	IF (ecrit_slab_oc.eq.1) then
955	open(97,file='div_slab.dat',STATUS='UNKNOWN')
956	elseif (ecrit_slab_oc.eq.0) then
957	open(97,file='div_slab.dat',STATUS='OLD')
958	endif
959	!
960	!---------------------------------------------------------------------
961	! Initialize target profile for RHT nudging if needed
962	!---------------------------------------------------------------------
963	if (nudge(inudge_RHT)) then
964	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
965	endif
966	if (nudge(inudge_UV)) then
967	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
968	endif
969	!
970	!=====================================================================
971	! START OF THE TEMPORAL LOOP :
972	!=====================================================================
973
974	it_end = nint(fnday*day_step)
975	!test JLD it_end = 10
976	do while(it.le.it_end)
977
978	if (prt_level.ge.1) then
979	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
980	& it,day,time,it_end,day_step
981	print*,'PAS DE TEMPS ',timestep
982	endif
983	!Al1 demande de restartphy.nc
984	if (it.eq.it_end) lastcall=.True.
985
986	!---------------------------------------------------------------------
987	! Interpolation of forcings in time and onto model levels
988	!---------------------------------------------------------------------
989
990	#include "1D_interp_cases.h"
991
992	if (forcing_GCM2SCM) then
993	write (,) 'forcing_GCM2SCM not yet implemented'
994	stop 'in time loop'
995	endif ! forcing_GCM2SCM
996
997	!---------------------------------------------------------------------
998	! Geopotential :
999	!---------------------------------------------------------------------
1000
1001	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1002	do l = 1, llm-1
1003	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1004	& (play(l)-play(l+1))/(play(l)+play(l+1))
1005	enddo
1006
1007	!---------------------------------------------------------------------
1008	! Listing output for debug prt_level>=1
1009	!---------------------------------------------------------------------
1010	if (prt_level>=1) then
1011	print *,' avant physiq : -------- day time ',day,time
1012	write(,) 'firstcall,lastcall,phis', &
1013	& firstcall,lastcall,phis
1014	end if
1015	if (prt_level>=5) then
1016	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1017	& 'presniv','plev','play','phi'
1018	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1019	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1020	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1021	& 'presniv','u','v','temp','q1','q2','omega2'
1022	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1023	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1024	endif
1025
1026	!---------------------------------------------------------------------
1027	! Call physiq :
1028	!---------------------------------------------------------------------
1029	call physiq(ngrid,llm, &
1030	firstcall,lastcall,timestep, &
1031	plev,play,phi,phis,presnivs, &
1032	u,v, rot, temp,q,omega2, &
1033	du_phys,dv_phys,dt_phys,dq,dpsrf)
1034	firstcall=.false.
1035
1036	!---------------------------------------------------------------------
1037	! Listing output for debug
1038	!---------------------------------------------------------------------
1039	if (prt_level>=5) then
1040	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1041	& 'presniv','plev','play','phi'
1042	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1043	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1044	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1045	& 'presniv','u','v','temp','q1','q2','omega2'
1046	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1047	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1048	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1049	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1050	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1051	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1052	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1053	write(,) 'dpsrf',dpsrf
1054	endif
1055	!---------------------------------------------------------------------
1056	! Add physical tendencies :
1057	!---------------------------------------------------------------------
1058
1059	fcoriolis=2.sin(rpixlat/180.)*romega
1060	if (forcing_radconv .or. forcing_fire) then
1061	fcoriolis=0.0
1062	dt_cooling=0.0
1063	d_th_adv=0.0
1064	d_q_adv=0.0
1065	endif
1066	! print*, 'calcul de fcoriolis ', fcoriolis
1067
1068	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1069	& .or.forcing_amma .or. forcing_type.eq.101) then
1070	fcoriolis=0.0 ; ug=0. ; vg=0.
1071	endif
1072
1073	if(forcing_rico) then
1074	dt_cooling=0.
1075	endif
1076
1077	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1078	fcoriolis, xlat,mxcalc
1079
1080	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1081	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1082	! print *,'u-ug=',u-ug
1083
1084	!!!!!!!!!!!!!!!!!!!!!!!!
1085	! Geostrophic wind
1086	!!!!!!!!!!!!!!!!!!!!!!!!
1087	sfdt = sin(0.5fcoriolistimestep)
1088	cfdt = cos(0.5fcoriolistimestep)
1089	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1090	!
1091	du_age(1:mxcalc)= -2.sfdt/timestep &
1092	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1093	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1094	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1095	!
1096	dv_age(1:mxcalc)= -2.sfdt/timestep &
1097	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1098	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1099	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1100	!
1101	!!!!!!!!!!!!!!!!!!!!!!!!
1102	! Nudging
1103	!!!!!!!!!!!!!!!!!!!!!!!!
1104	d_t_nudge(:) = 0.
1105	d_q_nudge(:,:) = 0.
1106	d_u_nudge(:) = 0.
1107	d_v_nudge(:) = 0.
1108	if (nudge(inudge_RHT)) then
1109	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1110	& d_t_nudge,d_q_nudge(:,1))
1111	endif
1112	if (nudge(inudge_UV)) then
1113	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1114	& d_u_nudge,d_v_nudge)
1115	endif
1116	!
1117	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1118	! call writefield_phy('dv_age' ,dv_age,llm)
1119	! call writefield_phy('du_age' ,du_age,llm)
1120	! call writefield_phy('du_phys' ,du_phys,llm)
1121	! call writefield_phy('u_tend' ,u,llm)
1122	! call writefield_phy('u_g' ,ug,llm)
1123	!
1124	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1125	!! Increment state variables
1126	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1127	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1128
1129	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1130	! au dessus de 700hpa, on relaxe vers les profils initiaux
1131	if (forcing_sandu .OR. forcing_astex) then
1132	#include "1D_nudge_sandu_astex.h"
1133	else
1134	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1135	& du_phys(1:mxcalc) &
1136	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1137	& +d_u_nudge(1:mxcalc) )
1138	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1139	& dv_phys(1:mxcalc) &
1140	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1141	& +d_v_nudge(1:mxcalc) )
1142	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1143	& dq(1:mxcalc,:) &
1144	& +d_q_adv(1:mxcalc,:) &
1145	& +d_q_nudge(1:mxcalc,:) )
1146
1147	if (prt_level.ge.3) then
1148	print *, &
1149	& 'physiq-> temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1) ', &
1150	& temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1)
1151	print* ,'dv_phys=',dv_phys
1152	print* ,'dv_age=',dv_age
1153	print* ,'dv_adv=',dv_adv
1154	print* ,'d_v_nudge=',d_v_nudge
1155	print*, v
1156	print*, vg
1157	endif
1158
1159	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1160	& dt_phys(1:mxcalc) &
1161	& +d_th_adv(1:mxcalc) &
1162	& +d_t_nudge(1:mxcalc) &
1163	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1164
1165	endif ! forcing_sandu or forcing_astex
1166
1167	teta=temp(pzero/play)*rkappa
1168	!
1169	!---------------------------------------------------------------------
1170	! Nudge soil temperature if requested
1171	!---------------------------------------------------------------------
1172
1173	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1174	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1175	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1176	ENDIF
1177
1178	!---------------------------------------------------------------------
1179	! Add large-scale tendencies (advection, etc) :
1180	!---------------------------------------------------------------------
1181
1182	!cc nrlmd
1183	!cc tmpvar=teta
1184	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1185	!cc
1186	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1187	!cc tmpvar(:)=q(:,1)
1188	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1189	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1190	!cc tmpvar(:)=q(:,2)
1191	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1192	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1193
1194	END IF ! end if tendency of tendency should be added
1195
1196	!---------------------------------------------------------------------
1197	! Air temperature :
1198	!---------------------------------------------------------------------
1199	if (lastcall) then
1200	print*,'Pas de temps final ',it
1201	call ju2ymds(daytime, an, mois, jour, heure)
1202	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1203	endif
1204
1205	! incremente day time
1206	! print*,'daytime bef',daytime,1./day_step
1207	daytime = daytime+1./day_step
1208	!Al1dbg
1209	day = int(daytime+0.1/day_step)
1210	! time = max(daytime-day,0.0)
1211	!Al1&jyg: correction de bug
1212	!cc time = real(mod(it,day_step))/day_step
1213	time = time_ini/24.+real(mod(it,day_step))/day_step
1214	! print*,'daytime nxt time',daytime,time
1215	it=it+1
1216
1217	enddo
1218
1219	!Al1
1220	if (ecrit_slab_oc.ne.-1) close(97)
1221
1222	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1223	! -------------------------------------
1224	call dyn1dredem("restart1dyn.nc", &
1225	& plev,play,phi,phis,presnivs, &
1226	& u,v,temp,q,omega2)
1227
1228	CALL abort_gcm ('lmdz1d ','The End ',0)
1229
1230	end
1231
1232	#include "1DUTILS.h"
1233	#include "1Dconv.h"
1234
1235	!#endif
1236
1237

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format