Context Navigation

lmdz1d.F90 @ 2668

Last change on this file since 2668 was 2635, checked in by jyg, 8 years ago

Some cleaning in the wake routines: (i) the wake
number per unit area (wdens) is now a state
variable (held constant for the time being);
(ii) wake state variable changes are computed in
subroutine 'physiq' if iflag_wake_tend=1 (it is
computed within wake routines if
iflag_wake_tend=0, consistent with earlier
versions); (iii) the new routine 'add_wake_tend'
adds tendencies to wake state variables; (iv)
tendencies due to various processes (pbl, wakes,
thermals) are named and added separately.

File size: 44.0 KB

Line
1	!#ifdef CPP_1D
2	!#include "../dyn3d/mod_const_mpi.F90"
3	!#include "../dyn3d_common/control_mod.F90"
4	!#include "../dyn3d_common/infotrac.F90"
5	!#include "../dyn3d_common/disvert.F90"
6
7
8	PROGRAM lmdz1d
9
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
21	zgam, zmax0, zmea, zpic, zsig, &
22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
23	USE dimphy
24	USE surface_data, only : type_ocean,ok_veget
25	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
26	pbl_surface_final
27	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
28
29	USE infotrac ! new
30	USE control_mod
31	USE indice_sol_mod
32	USE phyaqua_mod
33	USE mod_1D_cases_read
34	USE mod_1D_amma_read
35	USE print_control_mod, ONLY: lunout, prt_level
36	USE iniphysiq_mod, ONLY: iniphysiq
37	USE mod_const_mpi, ONLY: comm_lmdz
38	USE physiq_mod, ONLY: physiq
39	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
40	preff
41	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
42	itau_dyn, itau_phy, start_time
43
44	implicit none
45	#include "dimensions.h"
46	#include "YOMCST.h"
47	!!#include "control.h"
48	#include "clesphys.h"
49	#include "dimsoil.h"
50	!#include "indicesol.h"
51
52	#include "compar1d.h"
53	#include "flux_arp.h"
54	#include "date_cas.h"
55	#include "tsoilnudge.h"
56	#include "fcg_gcssold.h"
57	!!!#include "fbforcing.h"
58	#include "compbl.h"
59
60	!=====================================================================
61	! DECLARATIONS
62	!=====================================================================
63
64	!---------------------------------------------------------------------
65	! Externals
66	!---------------------------------------------------------------------
67	external fq_sat
68	real fq_sat
69
70	!---------------------------------------------------------------------
71	! Arguments d' initialisations de la physique (USER DEFINE)
72	!---------------------------------------------------------------------
73
74	integer, parameter :: ngrid=1
75	real :: zcufi = 1.
76	real :: zcvfi = 1.
77
78	!- real :: nat_surf
79	!- logical :: ok_flux_surf
80	!- real :: fsens
81	!- real :: flat
82	!- real :: tsurf
83	!- real :: rugos
84	!- real :: qsol(1:2)
85	!- real :: qsurf
86	!- real :: psurf
87	!- real :: zsurf
88	!- real :: albedo
89	!-
90	!- real :: time = 0.
91	!- real :: time_ini
92	!- real :: xlat
93	!- real :: xlon
94	!- real :: wtsurf
95	!- real :: wqsurf
96	!- real :: restart_runoff
97	!- real :: xagesno
98	!- real :: qsolinp
99	!- real :: zpicinp
100	!-
101	real :: fnday
102	real :: day, daytime
103	real :: day1
104	real :: heure
105	integer :: jour
106	integer :: mois
107	integer :: an
108
109	!---------------------------------------------------------------------
110	! Declarations related to forcing and initial profiles
111	!---------------------------------------------------------------------
112
113	integer :: kmax = llm
114	integer llm700,nq1,nq2
115	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
116	real timestep, frac
117	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
118	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
119	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
120	real dqtdxls(nlev_max),dqtdyls(nlev_max)
121	real dqtdtls(nlev_max),thlpcar(nlev_max)
122	real qprof(nlev_max,nqmx)
123
124	! integer :: forcing_type
125	logical :: forcing_les = .false.
126	logical :: forcing_armcu = .false.
127	logical :: forcing_rico = .false.
128	logical :: forcing_radconv = .false.
129	logical :: forcing_toga = .false.
130	logical :: forcing_twpice = .false.
131	logical :: forcing_amma = .false.
132	logical :: forcing_dice = .false.
133	logical :: forcing_GCM2SCM = .false.
134	logical :: forcing_GCSSold = .false.
135	logical :: forcing_sandu = .false.
136	logical :: forcing_astex = .false.
137	logical :: forcing_fire = .false.
138	logical :: forcing_case = .false.
139	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
140	! (cf read_tsurf1d.F)
141
142	!vertical advection computation
143	! real d_t_z(llm), d_q_z(llm)
144	! real d_t_dyn_z(llm), dq_dyn_z(llm)
145	! real zz(llm)
146	! real zfact
147
148	!flag forcings
149	logical :: nudge_wind=.true.
150	logical :: nudge_thermo=.false.
151	logical :: cptadvw=.true.
152	!=====================================================================
153	! DECLARATIONS FOR EACH CASE
154	!=====================================================================
155	!
156	#include "1D_decl_cases.h"
157	!
158	!---------------------------------------------------------------------
159	! Declarations related to nudging
160	!---------------------------------------------------------------------
161	integer :: nudge_max
162	parameter (nudge_max=9)
163	integer :: inudge_RHT=1
164	integer :: inudge_UV=2
165	logical :: nudge(nudge_max)
166	real :: t_targ(llm)
167	real :: rh_targ(llm)
168	real :: u_targ(llm)
169	real :: v_targ(llm)
170	!
171	!---------------------------------------------------------------------
172	! Declarations related to vertical discretization:
173	!---------------------------------------------------------------------
174	real :: pzero=1.e5
175	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
176	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1),poub
177
178	!---------------------------------------------------------------------
179	! Declarations related to variables
180	!---------------------------------------------------------------------
181
182	real :: phi(llm)
183	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
184	REAL rot(1, llm) ! relative vorticity, in s-1
185	real :: rlat_rad(1),rlon_rad(1)
186	real :: omega(llm+1),omega2(llm),rho(llm+1)
187	real :: ug(llm),vg(llm),fcoriolis
188	real :: sfdt, cfdt
189	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
190	real :: dt_dyn(llm)
191	real :: dt_cooling(llm),d_th_adv(llm),d_t_nudge(llm)
192	real :: d_u_nudge(llm),d_v_nudge(llm)
193	real :: du_adv(llm),dv_adv(llm)
194	real :: du_age(llm),dv_age(llm)
195	real :: alpha
196	real :: ttt
197
198	REAL, ALLOCATABLE, DIMENSION(:,:):: q
199	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
200	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
201	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
202	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
203	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
204
205	!---------------------------------------------------------------------
206	! Initialization of surface variables
207	!---------------------------------------------------------------------
208	real :: run_off_lic_0(1)
209	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
210	real :: tsoil(1,nsoilmx,nbsrf)
211	! real :: agesno(1,nbsrf)
212
213	!---------------------------------------------------------------------
214	! Call to phyredem
215	!---------------------------------------------------------------------
216	logical :: ok_writedem =.true.
217	real :: sollw_in = 0.
218	real :: solsw_in = 0.
219
220	!---------------------------------------------------------------------
221	! Call to physiq
222	!---------------------------------------------------------------------
223	logical :: firstcall=.true.
224	logical :: lastcall=.false.
225	real :: phis(1) = 0.0
226	real :: dpsrf(1)
227
228	!---------------------------------------------------------------------
229	! Initializations of boundary conditions
230	!---------------------------------------------------------------------
231	integer, parameter :: yd = 360
232	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
233	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
234	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
235	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
236	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
237	real :: phy_ice (yd) = 0.0 ! Fraction de glace
238	real :: phy_fter(yd) = 0.0 ! Fraction de terre
239	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
240	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
241	real :: phy_flic(yd) = 0.0 ! Fraction de glace
242
243	!---------------------------------------------------------------------
244	! Fichiers et d'autres variables
245	!---------------------------------------------------------------------
246	integer :: k,l,i,it=1,mxcalc
247	integer :: nsrf
248	integer jcode
249	INTEGER read_climoz
250	!
251	integer :: it_end ! iteration number of the last call
252	!Al1
253	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
254	data ecrit_slab_oc/-1/
255	!
256	! if flag_inhib_forcing = 0, tendencies of forcing are added
257	! <> 0, tendencies of forcing are not added
258	INTEGER :: flag_inhib_forcing = 0
259
260	!=====================================================================
261	! INITIALIZATIONS
262	!=====================================================================
263	du_phys(:)=0.
264	dv_phys(:)=0.
265	dt_phys(:)=0.
266	dt_dyn(:)=0.
267	dt_cooling(:)=0.
268	d_th_adv(:)=0.
269	d_t_nudge(:)=0.
270	d_u_nudge(:)=0.
271	d_v_nudge(:)=0.
272	du_adv(:)=0.
273	dv_adv(:)=0.
274	du_age(:)=0.
275	dv_age(:)=0.
276
277	! Initialization of Common turb_forcing
278	dtime_frcg = 0.
279	Turb_fcg_gcssold=.false.
280	hthturb_gcssold = 0.
281	hqturb_gcssold = 0.
282
283	!---------------------------------------------------------------------
284	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
285	!---------------------------------------------------------------------
286	!Al1
287	call conf_unicol
288	!Al1 moves this gcssold var from common fcg_gcssold to
289	Turb_fcg_gcssold = xTurb_fcg_gcssold
290	! --------------------------------------------------------------------
291	close(1)
292	!Al1
293	write(,) 'lmdz1d.def lu => unicol.def'
294
295	! forcing_type defines the way the SCM is forced:
296	!forcing_type = 0 ==> forcing_les = .true.
297	! initial profiles from file prof.inp.001
298	! no forcing by LS convergence ;
299	! surface temperature imposed ;
300	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
301	!forcing_type = 1 ==> forcing_radconv = .true.
302	! idem forcing_type = 0, but the imposed radiative cooling
303	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
304	! then there is no radiative cooling at all)
305	!forcing_type = 2 ==> forcing_toga = .true.
306	! initial profiles from TOGA-COARE IFA files
307	! LS convergence and SST imposed from TOGA-COARE IFA files
308	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
309	! initial profiles from the GCM output
310	! LS convergence imposed from the GCM output
311	!forcing_type = 4 ==> forcing_twpice = .true.
312	! initial profiles from TWP-ICE cdf file
313	! LS convergence, omega and SST imposed from TWP-ICE files
314	!forcing_type = 5 ==> forcing_rico = .true.
315	! initial profiles from RICO files
316	! LS convergence imposed from RICO files
317	!forcing_type = 6 ==> forcing_amma = .true.
318	! initial profiles from AMMA nc file
319	! LS convergence, omega and surface fluxes imposed from AMMA file
320	!forcing_type = 7 ==> forcing_dice = .true.
321	! initial profiles and large scale forcings in dice_driver.nc
322	! Different stages: soil model alone, atm. model alone
323	! then both models coupled
324	!forcing_type >= 100 ==> forcing_case = .true.
325	! initial profiles and large scale forcings in cas.nc
326	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
327	! 101=cindynamo
328	! 102=bomex
329	!forcing_type = 40 ==> forcing_GCSSold = .true.
330	! initial profile from GCSS file
331	! LS convergence imposed from GCSS file
332	!forcing_type = 50 ==> forcing_fire = .true.
333	! forcing from fire.nc
334	!forcing_type = 59 ==> forcing_sandu = .true.
335	! initial profiles from sanduref file: see prof.inp.001
336	! SST varying with time and divergence constante: see ifa_sanduref.txt file
337	! Radiation has to be computed interactively
338	!forcing_type = 60 ==> forcing_astex = .true.
339	! initial profiles from file: see prof.inp.001
340	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
341	! Radiation has to be computed interactively
342	!forcing_type = 61 ==> forcing_armcu = .true.
343	! initial profiles from file: see prof.inp.001
344	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
345	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
346	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
347	! Radiation to be switched off
348	!
349	if (forcing_type .eq.0) THEN
350	forcing_les = .true.
351	elseif (forcing_type .eq.1) THEN
352	forcing_radconv = .true.
353	elseif (forcing_type .eq.2) THEN
354	forcing_toga = .true.
355	elseif (forcing_type .eq.3) THEN
356	forcing_GCM2SCM = .true.
357	elseif (forcing_type .eq.4) THEN
358	forcing_twpice = .true.
359	elseif (forcing_type .eq.5) THEN
360	forcing_rico = .true.
361	elseif (forcing_type .eq.6) THEN
362	forcing_amma = .true.
363	elseif (forcing_type .eq.7) THEN
364	forcing_dice = .true.
365	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
366	forcing_case = .true.
367	year_ini_cas=2011
368	mth_ini_cas=10
369	day_deb=1
370	heure_ini_cas=0.
371	pdt_cas=3*3600. ! forcing frequency
372	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
373	forcing_case = .true.
374	year_ini_cas=1969
375	mth_ini_cas=6
376	day_deb=24
377	heure_ini_cas=0.
378	pdt_cas=1800. ! forcing frequency
379	elseif (forcing_type .eq.40) THEN
380	forcing_GCSSold = .true.
381	elseif (forcing_type .eq.50) THEN
382	forcing_fire = .true.
383	elseif (forcing_type .eq.59) THEN
384	forcing_sandu = .true.
385	elseif (forcing_type .eq.60) THEN
386	forcing_astex = .true.
387	elseif (forcing_type .eq.61) THEN
388	forcing_armcu = .true.
389	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
390	else
391	write (,) 'ERROR : unknown forcing_type ', forcing_type
392	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
393	ENDIF
394	print*,"forcing type=",forcing_type
395
396	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
397	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
398	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
399	! through the common sst_forcing.
400
401	type_ts_forcing = 0
402	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
403	& type_ts_forcing = 1
404	!
405	! Initialization of the logical switch for nudging
406	jcode = iflag_nudge
407	do i = 1,nudge_max
408	nudge(i) = mod(jcode,10) .ge. 1
409	jcode = jcode/10
410	enddo
411	!---------------------------------------------------------------------
412	! Definition of the run
413	!---------------------------------------------------------------------
414
415	call conf_gcm( 99, .TRUE. )
416	!-----------------------------------------------------------------------
417	! Choix du calendrier
418	! -------------------
419
420	! calend = 'earth_365d'
421	if (calend == 'earth_360d') then
422	call ioconf_calendar('360d')
423	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
424	else if (calend == 'earth_365d') then
425	call ioconf_calendar('noleap')
426	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
427	else if (calend == 'earth_366d') then
428	call ioconf_calendar('all_leap')
429	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
430	else if (calend == 'gregorian') then
431	call ioconf_calendar('gregorian') ! not to be used by normal users
432	write(,)'CALENDRIER CHOISI: Gregorien'
433	else
434	write (,) 'ERROR : unknown calendar ', calend
435	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
436	endif
437	!-----------------------------------------------------------------------
438	!
439	!c Date :
440	! La date est supposee donnee sous la forme [annee, numero du jour dans
441	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
442	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
443	! Le numero du jour est dans "day". L heure est traitee separement.
444	! La date complete est dans "daytime" (l'unite est le jour).
445	if (nday>0) then
446	fnday=nday
447	else
448	fnday=-nday/float(day_step)
449	endif
450	print *,'fnday=',fnday
451
452	start_time=time_ini/24.
453
454	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
455	IF(forcing_type .EQ. 61) fnday=53100./86400.
456	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
457	IF(forcing_type .EQ. 6) fnday=64800./86400.
458	! IF(forcing_type .EQ. 6) fnday=50400./86400.
459	annee_ref = anneeref
460	mois = 1
461	day_ref = dayref
462	heure = 0.
463	itau_dyn = 0
464	itau_phy = 0
465	call ymds2ju(annee_ref,mois,day_ref,heure,day)
466	day_ini = int(day)
467	day_end = day_ini + fnday
468
469	IF (forcing_type .eq.2) THEN
470	! Convert the initial date of Toga-Coare to Julian day
471	call ymds2ju &
472	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
473
474	ELSEIF (forcing_type .eq.4) THEN
475	! Convert the initial date of TWPICE to Julian day
476	call ymds2ju &
477	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
478	& ,day_ju_ini_twpi)
479	ELSEIF (forcing_type .eq.6) THEN
480	! Convert the initial date of AMMA to Julian day
481	call ymds2ju &
482	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
483	& ,day_ju_ini_amma)
484	ELSEIF (forcing_type .eq.7) THEN
485	! Convert the initial date of DICE to Julian day
486	call ymds2ju &
487	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
488	& ,day_ju_ini_dice)
489	ELSEIF (forcing_type .gt.100) THEN
490	! Convert the initial date to Julian day
491	day_ini_cas=day_deb
492	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
493	call ymds2ju &
494	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas &
495	& ,day_ju_ini_cas)
496	print*,'time case 2',day_ini_cas,day_ju_ini_cas
497	ELSEIF (forcing_type .eq.59) THEN
498	! Convert the initial date of Sandu case to Julian day
499	call ymds2ju &
500	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
501	& time_ini*3600.,day_ju_ini_sandu)
502
503	ELSEIF (forcing_type .eq.60) THEN
504	! Convert the initial date of Astex case to Julian day
505	call ymds2ju &
506	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
507	& time_ini*3600.,day_ju_ini_astex)
508
509	ELSEIF (forcing_type .eq.61) THEN
510	! Convert the initial date of Arm_cu case to Julian day
511	call ymds2ju &
512	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
513	& ,day_ju_ini_armcu)
514	ENDIF
515
516	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
517	! Print out the actual date of the beginning of the simulation :
518	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
519	print *,' Time of beginning : ', &
520	& year_print, month_print, day_print, sec_print
521
522	!---------------------------------------------------------------------
523	! Initialization of dimensions, geometry and initial state
524	!---------------------------------------------------------------------
525	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
526	! but we still need to initialize dimphy module (klon,klev,etc.) here.
527	call init_dimphy(1,llm)
528	call suphel
529	call infotrac_init
530
531	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
532	allocate(q(llm,nqtot)) ; q(:,:)=0.
533	allocate(dq(llm,nqtot))
534	allocate(dq_dyn(llm,nqtot))
535	allocate(d_q_adv(llm,nqtot))
536	allocate(d_q_nudge(llm,nqtot))
537	! allocate(d_th_adv(llm))
538
539	q(:,:) = 0.
540	dq(:,:) = 0.
541	dq_dyn(:,:) = 0.
542	d_q_adv(:,:) = 0.
543	d_q_nudge(:,:) = 0.
544
545	!
546	! No ozone climatology need be read in this pre-initialization
547	! (phys_state_var_init is called again in physiq)
548	read_climoz = 0
549	!
550	call phys_state_var_init(read_climoz)
551
552	if (ngrid.ne.klon) then
553	print*,'stop in inifis'
554	print*,'Probleme de dimensions :'
555	print*,'ngrid = ',ngrid
556	print*,'klon = ',klon
557	stop
558	endif
559	!!!=====================================================================
560	!!! Feedback forcing values for Gateaux differentiation (al1)
561	!!!=====================================================================
562	!!! Surface Planck forcing bracketing call radiation
563	!! surf_Planck = 0.
564	!! surf_Conv = 0.
565	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
566	!!! a mettre dans le lmdz1d.def ou autre
567	!!
568	!!
569	qsol = qsolinp
570	qsurf = fq_sat(tsurf,psurf/100.)
571	day1= day_ini
572	time=daytime-day
573	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
574	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
575
576	!
577	!! mpl et jyg le 22/08/2012 :
578	!! pour que les cas a flux de surface imposes marchent
579	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
580	fsens=-wtsurfrcpdrho(1)
581	flat=-wqsurfrlvttrho(1)
582	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
583	ENDIF
584	print*,'Flux sol ',fsens,flat
585	!! ok_flux_surf=.false.
586	!! fsens=-wtsurfrcpdrho(1)
587	!! flat=-wqsurfrlvttrho(1)
588	!!!!
589
590	! Vertical discretization and pressure levels at half and mid levels:
591
592	pa = 5e4
593	!! preff= 1.01325e5
594	preff = psurf
595	IF (ok_old_disvert) THEN
596	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
597	print *,'On utilise disvert0'
598	ELSE
599	call disvert()
600	print *,'On utilise disvert'
601	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
602	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
603	ENDIF
604	! initialize ap,bp, etc. in vertical_layers_mod
605	sig_s=presnivs/preff
606	plev =ap+bp*psurf
607	play = 0.5*(plev(1:llm)+plev(2:llm+1))
608	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
609
610	IF (forcing_type .eq. 59) THEN
611	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
612	write(,) '***********************'
613	do l = 1, llm
614	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
615	if (trouve_700 .and. play(l).le.70000) then
616	llm700=l
617	print *,'llm700,play=',llm700,play(l)/100.
618	trouve_700= .false.
619	endif
620	enddo
621	write(,) '***********************'
622	ENDIF
623
624	!
625	!=====================================================================
626	! EVENTUALLY, READ FORCING DATA :
627	!=====================================================================
628
629	#include "1D_read_forc_cases.h"
630
631	if (forcing_GCM2SCM) then
632	write (,) 'forcing_GCM2SCM not yet implemented'
633	stop 'in initialization'
634	endif ! forcing_GCM2SCM
635
636	print*,'mxcalc=',mxcalc
637	! print*,'zlay=',zlay(mxcalc)
638	print*,'play=',play(mxcalc)
639
640	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
641	ts_cur = tsurf ! SST used in read_tsurf1d
642	!=====================================================================
643	! Initialisation de la physique :
644	!=====================================================================
645
646	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
647	!
648	! day_step, iphysiq lus dans gcm.def ci-dessus
649	! timestep: calcule ci-dessous from rday et day_step
650	! ngrid=1
651	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
652	! rday: defini dans suphel.F (86400.)
653	! day_ini: lu dans run.def (dayref)
654	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
655	! airefi,zcufi,zcvfi initialises au debut de ce programme
656	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
657	day_step = float(nsplit_phys)*day_step/float(iphysiq)
658	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
659	timestep =rday/day_step
660	dtime_frcg = timestep
661	!
662	zcufi=airefi
663	zcvfi=airefi
664	!
665	rlat_rad(1)=xlat*rpi/180.
666	rlon_rad(1)=xlon*rpi/180.
667
668	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
669	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
670	! with '0.' when necessary
671	call iniphysiq(iim,jjm,llm, &
672	1,comm_lmdz, &
673	rday,day_ini,timestep, &
674	(/rlat_rad(1),0./),(/0./), &
675	(/0.,0./),(/rlon_rad(1),0./), &
676	(/ (/airefi,0./),(/0.,0./) /), &
677	(/zcufi,0.,0.,0./), &
678	(/zcvfi,0./), &
679	ra,rg,rd,rcpd,1)
680	print*,'apres iniphysiq'
681
682	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
683	co2_ppm= 330.0
684	solaire=1370.0
685
686	! Ecriture du startphy avant le premier appel a la physique.
687	! On le met juste avant pour avoir acces a tous les champs
688
689	if (ok_writedem) then
690
691	!--------------------------------------------------------------------------
692	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
693	! need : qsol fder snow qsurf evap rugos agesno ftsoil
694	!--------------------------------------------------------------------------
695
696	type_ocean = "force"
697	run_off_lic_0(1) = restart_runoff
698	call fonte_neige_init(run_off_lic_0)
699
700	fder=0.
701	snsrf(1,:)=0. ! couverture de neige des sous surface
702	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
703	fevap=0.
704	z0m(1,:)=rugos ! couverture de neige des sous surface
705	z0h(1,:)=rugos ! couverture de neige des sous surface
706	agesno = xagesno
707	tsoil(:,:,:)=tsurf
708	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
709	! tsoil(1,1,1)=299.18
710	! tsoil(1,2,1)=300.08
711	! tsoil(1,3,1)=301.88
712	! tsoil(1,4,1)=305.48
713	! tsoil(1,5,1)=308.00
714	! tsoil(1,6,1)=308.00
715	! tsoil(1,7,1)=308.00
716	! tsoil(1,8,1)=308.00
717	! tsoil(1,9,1)=308.00
718	! tsoil(1,10,1)=308.00
719	! tsoil(1,11,1)=308.00
720	!-----------------------------------------------------------------------
721	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
722
723	!------------------ prepare limit conditions for limit.nc -----------------
724	!-- Ocean force
725
726	print*,'avant phyredem'
727	pctsrf(1,:)=0.
728	if (nat_surf.eq.0.) then
729	pctsrf(1,is_oce)=1.
730	pctsrf(1,is_ter)=0.
731	else
732	pctsrf(1,is_oce)=0.
733	pctsrf(1,is_ter)=1.
734	end if
735
736	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
737	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
738
739	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
740	zpic = zpicinp
741	ftsol=tsurf
742	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
743	! 6 albedo, mais on peut quand meme tourner avec
744	! moins. Seules les 2 ou 4 premiers seront lus
745	falb_dir=albedo
746	falb_dif=albedo
747	rugoro=rugos
748	t_ancien(1,:)=temp(:)
749	q_ancien(1,:)=q(:,1)
750	!jyg<
751	!! pbl_tke(:,:,:)=1.e-8
752	pbl_tke(:,:,:)=0.
753	pbl_tke(:,2,:)=1.e-2
754	PRINT *, ' pbl_tke dans lmdz1d '
755	if (prt_level .ge. 5) then
756	DO nsrf = 1,4
757	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
758	ENDDO
759	end if
760
761	!>jyg
762
763	rain_fall=0.
764	snow_fall=0.
765	solsw=0.
766	sollw=0.
767	sollwdown=rsigmatsurf*4
768	radsol=0.
769	rnebcon=0.
770	ratqs=0.
771	clwcon=0.
772	zmax0 = 0.
773	zmea=0.
774	zstd=0.
775	zsig=0.
776	zgam=0.
777	zval=0.
778	zthe=0.
779	sig1=0.
780	w01=0.
781	wake_cstar = 0.
782	wake_deltaq = 0.
783	wake_deltat = 0.
784	wake_delta_pbl_TKE(:,:,:) = 0.
785	delta_tsurf = 0.
786	wake_fip = 0.
787	wake_pe = 0.
788	wake_s = 0.
789	wake_dens = 0.
790	ale_bl = 0.
791	ale_bl_trig = 0.
792	alp_bl = 0.
793	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
794	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
795	entr_therm = 0.
796	detr_therm = 0.
797	f0 = 0.
798	fm_therm = 0.
799	u_ancien(1,:)=u(:)
800	v_ancien(1,:)=v(:)
801
802	!------------------------------------------------------------------------
803	! Make file containing restart for the physics (startphy.nc)
804	!
805	! NB: List of the variables to be written by phyredem (via put_field):
806	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
807	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
808	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
809	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
810	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
811	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
812	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
813	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
814	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
815	!
816	! NB2: The content of the startphy.nc file depends on some flags defined in
817	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
818	! to be set at some arbitratry convenient values.
819	!------------------------------------------------------------------------
820	!Al1 =============== restart option ==========================
821	if (.not.restart) then
822	iflag_pbl = 5
823	call phyredem ("startphy.nc")
824	else
825	! (desallocations)
826	print*,'callin surf final'
827	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
828	print*,'after surf final'
829	CALL fonte_neige_final(run_off_lic_0)
830	endif
831
832	ok_writedem=.false.
833	print*,'apres phyredem'
834
835	endif ! ok_writedem
836
837	!------------------------------------------------------------------------
838	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
839	! --------------------------------------------------
840	! NB: List of the variables to be written in limit.nc
841	! (by writelim.F, subroutine of 1DUTILS.h):
842	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
843	! phy_fter,phy_foce,phy_flic,phy_fsic)
844	!------------------------------------------------------------------------
845	do i=1,yd
846	phy_nat(i) = nat_surf
847	phy_alb(i) = albedo
848	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
849	phy_rug(i) = rugos
850	phy_fter(i) = pctsrf(1,is_ter)
851	phy_foce(i) = pctsrf(1,is_oce)
852	phy_fsic(i) = pctsrf(1,is_sic)
853	phy_flic(i) = pctsrf(1,is_lic)
854	enddo
855
856	! fabrication de limit.nc
857	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
858	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
859
860
861	call phys_state_var_end
862	!Al1
863	if (restart) then
864	print*,'call to restart dyn 1d'
865	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
866	& u,v,temp,q,omega2)
867
868	print*,'fnday,annee_ref,day_ref,day_ini', &
869	& fnday,annee_ref,day_ref,day_ini
870	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
871	day = day_ini
872	day_end = day_ini + nday
873	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
874
875	! Print out the actual date of the beginning of the simulation :
876	call ju2ymds(daytime, an, mois, jour, heure)
877	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
878
879	day = int(daytime)
880	time=daytime-day
881
882	print,'*** intialised fields from restart1dyn *****'
883	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
884	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
885	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
886	! raz for safety
887	do l=1,llm
888	dq_dyn(l,1) = 0.
889	enddo
890	endif
891	!Al1 ================ end restart =================================
892	IF (ecrit_slab_oc.eq.1) then
893	open(97,file='div_slab.dat',STATUS='UNKNOWN')
894	elseif (ecrit_slab_oc.eq.0) then
895	open(97,file='div_slab.dat',STATUS='OLD')
896	endif
897	!
898	!---------------------------------------------------------------------
899	! Initialize target profile for RHT nudging if needed
900	!---------------------------------------------------------------------
901	if (nudge(inudge_RHT)) then
902	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
903	endif
904	if (nudge(inudge_UV)) then
905	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
906	endif
907	!
908	!=====================================================================
909	! START OF THE TEMPORAL LOOP :
910	!=====================================================================
911
912	it_end = nint(fnday*day_step)
913	!test JLD it_end = 10
914	do while(it.le.it_end)
915
916	if (prt_level.ge.1) then
917	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
918	& it,day,time,it_end,day_step
919	print*,'PAS DE TEMPS ',timestep
920	endif
921	!Al1 demande de restartphy.nc
922	if (it.eq.it_end) lastcall=.True.
923
924	!---------------------------------------------------------------------
925	! Interpolation of forcings in time and onto model levels
926	!---------------------------------------------------------------------
927
928	#include "1D_interp_cases.h"
929
930	if (forcing_GCM2SCM) then
931	write (,) 'forcing_GCM2SCM not yet implemented'
932	stop 'in time loop'
933	endif ! forcing_GCM2SCM
934
935	!---------------------------------------------------------------------
936	! Geopotential :
937	!---------------------------------------------------------------------
938
939	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
940	do l = 1, llm-1
941	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
942	& (play(l)-play(l+1))/(play(l)+play(l+1))
943	enddo
944
945	!---------------------------------------------------------------------
946	! Listing output for debug prt_level>=1
947	!---------------------------------------------------------------------
948	if (prt_level>=1) then
949	print *,' avant physiq : -------- day time ',day,time
950	write(,) 'firstcall,lastcall,phis', &
951	& firstcall,lastcall,phis
952	end if
953	if (prt_level>=5) then
954	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
955	& 'presniv','plev','play','phi'
956	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
957	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
958	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
959	& 'presniv','u','v','temp','q1','q2','omega2'
960	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
961	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
962	endif
963
964	!---------------------------------------------------------------------
965	! Call physiq :
966	!---------------------------------------------------------------------
967	call physiq(ngrid,llm, &
968	firstcall,lastcall,timestep, &
969	plev,play,phi,phis,presnivs, &
970	u,v, rot, temp,q,omega2, &
971	du_phys,dv_phys,dt_phys,dq,dpsrf)
972	firstcall=.false.
973
974	!---------------------------------------------------------------------
975	! Listing output for debug
976	!---------------------------------------------------------------------
977	if (prt_level>=5) then
978	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
979	& 'presniv','plev','play','phi'
980	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
981	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
982	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
983	& 'presniv','u','v','temp','q1','q2','omega2'
984	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
985	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
986	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
987	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
988	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
989	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
990	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
991	write(,) 'dpsrf',dpsrf
992	endif
993	!---------------------------------------------------------------------
994	! Add physical tendencies :
995	!---------------------------------------------------------------------
996
997	fcoriolis=2.sin(rpixlat/180.)*romega
998	if (forcing_radconv .or. forcing_fire) then
999	fcoriolis=0.0
1000	dt_cooling=0.0
1001	d_th_adv=0.0
1002	d_q_adv=0.0
1003	endif
1004	! print*, 'calcul de fcoriolis ', fcoriolis
1005
1006	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1007	& .or.forcing_amma) then
1008	fcoriolis=0.0 ; ug=0. ; vg=0.
1009	endif
1010	if(forcing_rico) then
1011	dt_cooling=0.
1012	endif
1013
1014	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1015	fcoriolis, xlat,mxcalc
1016
1017	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1018	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1019	! print *,'u-ug=',u-ug
1020
1021	!!!!!!!!!!!!!!!!!!!!!!!!
1022	! Geostrophic wind
1023	!!!!!!!!!!!!!!!!!!!!!!!!
1024	sfdt = sin(0.5fcoriolistimestep)
1025	cfdt = cos(0.5fcoriolistimestep)
1026	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1027	!
1028	du_age(1:mxcalc)= -2.sfdt/timestep &
1029	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1030	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1031	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1032	!
1033	dv_age(1:mxcalc)= -2.sfdt/timestep &
1034	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1035	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1036	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1037	!
1038	!!!!!!!!!!!!!!!!!!!!!!!!
1039	! Nudging
1040	!!!!!!!!!!!!!!!!!!!!!!!!
1041	d_t_nudge(:) = 0.
1042	d_q_nudge(:,:) = 0.
1043	d_u_nudge(:) = 0.
1044	d_v_nudge(:) = 0.
1045	if (nudge(inudge_RHT)) then
1046	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1047	& d_t_nudge,d_q_nudge(:,1))
1048	endif
1049	if (nudge(inudge_UV)) then
1050	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1051	& d_u_nudge,d_v_nudge)
1052	endif
1053	!
1054	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1055	! call writefield_phy('dv_age' ,dv_age,llm)
1056	! call writefield_phy('du_age' ,du_age,llm)
1057	! call writefield_phy('du_phys' ,du_phys,llm)
1058	! call writefield_phy('u_tend' ,u,llm)
1059	! call writefield_phy('u_g' ,ug,llm)
1060	!
1061	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1062	!! Increment state variables
1063	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1064	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1065
1066	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1067	! au dessus de 700hpa, on relaxe vers les profils initiaux
1068	if (forcing_sandu .OR. forcing_astex) then
1069	#include "1D_nudge_sandu_astex.h"
1070	else
1071	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1072	& du_phys(1:mxcalc) &
1073	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1074	& +d_u_nudge(1:mxcalc) )
1075	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1076	& dv_phys(1:mxcalc) &
1077	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1078	& +d_v_nudge(1:mxcalc) )
1079	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1080	& dq(1:mxcalc,:) &
1081	& +d_q_adv(1:mxcalc,:) &
1082	& +d_q_nudge(1:mxcalc,:) )
1083
1084	if (prt_level.ge.3) then
1085	print *, &
1086	& 'physiq-> temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1) ', &
1087	& temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1)
1088	print* ,'dv_phys=',dv_phys
1089	print* ,'dv_age=',dv_age
1090	print* ,'dv_adv=',dv_adv
1091	print* ,'d_v_nudge=',d_v_nudge
1092	print*, v
1093	print*, vg
1094	endif
1095
1096	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1097	& dt_phys(1:mxcalc) &
1098	& +d_th_adv(1:mxcalc) &
1099	& +d_t_nudge(1:mxcalc) &
1100	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1101
1102	endif ! forcing_sandu or forcing_astex
1103
1104	teta=temp(pzero/play)*rkappa
1105	!
1106	!---------------------------------------------------------------------
1107	! Nudge soil temperature if requested
1108	!---------------------------------------------------------------------
1109
1110	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1111	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1112	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1113	ENDIF
1114
1115	!---------------------------------------------------------------------
1116	! Add large-scale tendencies (advection, etc) :
1117	!---------------------------------------------------------------------
1118
1119	!cc nrlmd
1120	!cc tmpvar=teta
1121	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1122	!cc
1123	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1124	!cc tmpvar(:)=q(:,1)
1125	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1126	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1127	!cc tmpvar(:)=q(:,2)
1128	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1129	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1130
1131	END IF ! end if tendency of tendency should be added
1132
1133	!---------------------------------------------------------------------
1134	! Air temperature :
1135	!---------------------------------------------------------------------
1136	if (lastcall) then
1137	print*,'Pas de temps final ',it
1138	call ju2ymds(daytime, an, mois, jour, heure)
1139	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1140	endif
1141
1142	! incremente day time
1143	! print*,'daytime bef',daytime,1./day_step
1144	daytime = daytime+1./day_step
1145	!Al1dbg
1146	day = int(daytime+0.1/day_step)
1147	! time = max(daytime-day,0.0)
1148	!Al1&jyg: correction de bug
1149	!cc time = real(mod(it,day_step))/day_step
1150	time = time_ini/24.+real(mod(it,day_step))/day_step
1151	! print*,'daytime nxt time',daytime,time
1152	it=it+1
1153
1154	enddo
1155
1156	!Al1
1157	if (ecrit_slab_oc.ne.-1) close(97)
1158
1159	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1160	! -------------------------------------
1161	call dyn1dredem("restart1dyn.nc", &
1162	& plev,play,phi,phis,presnivs, &
1163	& u,v,temp,q,omega2)
1164
1165	CALL abort_gcm ('lmdz1d ','The End ',0)
1166
1167	end
1168
1169	#include "1DUTILS.h"
1170	#include "1Dconv.h"
1171
1172	!#endif
1173

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format