Context Navigation

cva_driver.F90 @ 2347

Last change on this file since 2347 was 2346, checked in by Ehouarn Millour, 9 years ago

Physics/dynamics separation:

remove all references to dimensions.h from physics. nbp_lon (==iim) , nbp_lat (==jjm+1) and nbp_lev (==llm) from mod_grid_phy_lmdz should be used instead.
added module regular_lonlat_mod in phy_common to store information about the global (lon-lat) grid cell boundaries and centers.

Property copyright set to
Name of program: LMDZ
Creation date: 1984
Version: LMDZ5
License: CeCILL version 2
Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
See the license file in the root directory
Property svn:eol-style set to native
Property svn:keywords set to Author Date Id Revision

File size: 44.7 KB

Line
1
2	! $Id: cva_driver.F90 2346 2015-08-21 15:13:46Z emillour $
3
4	SUBROUTINE cva_driver(len, nd, ndp1, ntra, nloc, k_upper, &
5	iflag_con, iflag_mix, iflag_ice_thermo, iflag_clos, ok_conserv_q, &
6	!! delt, t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
7	delt, comp_threshold, & ! jyg
8	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
9	u1, v1, tra1, &
10	p1, ph1, &
11	Ale1, Alp1, omega1, &
12	sig1feed1, sig2feed1, wght1, &
13	iflag1, ft1, fq1, fu1, fv1, ftra1, &
14	precip1, kbas1, ktop1, &
15	cbmf1, plcl1, plfc1, wbeff1, &
16	sig1, w01, & !input/output
17	ptop21, sigd1, &
18	ma1, mip1, Vprecip1, Vprecipi1, upwd1, dnwd1, dnwd01, & ! jyg
19	qcondc1, wd1, &
20	cape1, cin1, tvp1, &
21	ftd1, fqd1, &
22	Plim11, Plim21, asupmax1, supmax01, asupmaxmin1, &
23	lalim_conv1, &
24	!! da1,phi1,mp1,phi21,d1a1,dam1,sigij1,clw1, & ! RomP
25	!! elij1,evap1,ep1,epmlmMm1,eplaMm1, & ! RomP
26	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, wghti1, & ! RomP, RL
27	clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP, RL
28	wdtrainA1, wdtrainM1, qtc1, sigt1, tau_cld_cv, &
29	coefw_cld_cv) ! RomP, AJ
30	! **************************************************************
31	! *
32	! CV_DRIVER *
33	! *
34	! *
35	! written by : Sandrine Bony-Lena , 17/05/2003, 11.19.41 *
36	! modified by : *
37	! **************************************************************
38	! **************************************************************
39
40	USE dimphy
41	USE print_control_mod, ONLY: prt_level, lunout
42	IMPLICIT NONE
43
44	! .............................START PROLOGUE............................
45
46
47	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a "1" appended.
48	! The "1" is removed for the corresponding compressed variables.
49	! PARAMETERS:
50	! Name Type Usage Description
51	! ---------- ---------- ------- ----------------------------
52
53	! len Integer Input first (i) dimension
54	! nd Integer Input vertical (k) dimension
55	! ndp1 Integer Input nd + 1
56	! ntra Integer Input number of tracors
57	! nloc Integer Input dimension of arrays for compressed fields
58	! k_upper Integer Input upmost level for vertical loops
59	! iflag_con Integer Input version of convect (3/4)
60	! iflag_mix Integer Input version of mixing (0/1/2)
61	! iflag_ice_thermo Integer Input accounting for ice thermodynamics (0/1)
62	! iflag_clos Integer Input version of closure (0/1)
63	! tau_cld_cv Real Input characteristic time of dissipation of mixing fluxes
64	! coefw_cld_cv Real Input coefficient for updraft velocity in convection
65	! ok_conserv_q Logical Input when true corrections for water conservation are swtiched on
66	! delt Real Input time step
67	! comp_threshold Real Input threshold on the fraction of convective points below which
68	! fields are compressed
69	! t1 Real Input temperature (sat draught envt)
70	! q1 Real Input specific hum (sat draught envt)
71	! qs1 Real Input sat specific hum (sat draught envt)
72	! t1_wake Real Input temperature (unsat draught envt)
73	! q1_wake Real Input specific hum(unsat draught envt)
74	! qs1_wake Real Input sat specific hum(unsat draughts envt)
75	! s1_wake Real Input fractionnal area covered by wakes
76	! u1 Real Input u-wind
77	! v1 Real Input v-wind
78	! tra1 Real Input tracors
79	! p1 Real Input full level pressure
80	! ph1 Real Input half level pressure
81	! ALE1 Real Input Available lifting Energy
82	! ALP1 Real Input Available lifting Power
83	! sig1feed1 Real Input sigma coord at lower bound of feeding layer
84	! sig2feed1 Real Input sigma coord at upper bound of feeding layer
85	! wght1 Real Input weight density determining the feeding mixture
86	! iflag1 Integer Output flag for Emanuel conditions
87	! ft1 Real Output temp tend
88	! fq1 Real Output spec hum tend
89	! fu1 Real Output u-wind tend
90	! fv1 Real Output v-wind tend
91	! ftra1 Real Output tracor tend
92	! precip1 Real Output precipitation
93	! kbas1 Integer Output cloud base level
94	! ktop1 Integer Output cloud top level
95	! cbmf1 Real Output cloud base mass flux
96	! sig1 Real In/Out section adiabatic updraft
97	! w01 Real In/Out vertical velocity within adiab updraft
98	! ptop21 Real In/Out top of entraining zone
99	! Ma1 Real Output mass flux adiabatic updraft
100	! mip1 Real Output mass flux shed by the adiabatic updraft
101	! Vprecip1 Real Output vertical profile of total precipitation
102	! Vprecipi1 Real Output vertical profile of ice precipitation
103	! upwd1 Real Output total upward mass flux (adiab+mixed)
104	! dnwd1 Real Output saturated downward mass flux (mixed)
105	! dnwd01 Real Output unsaturated downward mass flux
106	! qcondc1 Real Output in-cld mixing ratio of condensed water
107	! wd1 Real Output downdraft velocity scale for sfc fluxes
108	! cape1 Real Output CAPE
109	! cin1 Real Output CIN
110	! tvp1 Real Output adiab lifted parcell virt temp
111	! ftd1 Real Output precip temp tend
112	! fqt1 Real Output precip spec hum tend
113	! Plim11 Real Output
114	! Plim21 Real Output
115	! asupmax1 Real Output
116	! supmax01 Real Output
117	! asupmaxmin1 Real Output
118
119	! ftd1 Real Output Array of temperature tendency due to precipitations (K/s) of dimension ND,
120	! defined at same grid levels as T, Q, QS and P.
121
122	! fqd1 Real Output Array of specific humidity tendencies due to precipitations ((gm/gm)/s)
123	! of dimension ND, defined at same grid levels as T, Q, QS and P.
124
125	! wdtrainA1 Real Output precipitation detrained from adiabatic draught;
126	! used in tracer transport (cvltr)
127	! wdtrainM1 Real Output precipitation detrained from mixed draughts;
128	! used in tracer transport (cvltr)
129	! da1 Real Output used in tracer transport (cvltr)
130	! phi1 Real Output used in tracer transport (cvltr)
131	! mp1 Real Output used in tracer transport (cvltr)
132	! qtc1 Real Output specific humidity in convection
133	! sigt1 Real Output surface fraction in adiabatic updrafts
134	! phi21 Real Output used in tracer transport (cvltr)
135
136	! d1a1 Real Output used in tracer transport (cvltr)
137	! dam1 Real Output used in tracer transport (cvltr)
138
139	! epmlmMm1 Real Output used in tracer transport (cvltr)
140	! eplaMm1 Real Output used in tracer transport (cvltr)
141
142	! evap1 Real Output
143	! ep1 Real Output
144	! sigij1 Real Output used in tracer transport (cvltr)
145	! elij1 Real Output
146	! wghti1 Real Output final weight of the feeding layers,
147	! used in tracer transport (cvltr)
148
149
150	! S. Bony, Mar 2002:
151	! * Several modules corresponding to different physical processes
152	! * Several versions of convect may be used:
153	! - iflag_con=3: version lmd (previously named convect3)
154	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
155	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
156	! S. Bony, Oct 2002:
157	! * Vectorization of convect3 (ie version lmd)
158
159	! ..............................END PROLOGUE.............................
160
161
162
163	! Input
164	INTEGER, INTENT (IN) :: len
165	INTEGER, INTENT (IN) :: nd
166	INTEGER, INTENT (IN) :: ndp1
167	INTEGER, INTENT (IN) :: ntra
168	INTEGER, INTENT(IN) :: nloc ! (nloc=klon) pour l'instant
169	INTEGER, INTENT (IN) :: k_upper
170	INTEGER, INTENT (IN) :: iflag_con
171	INTEGER, INTENT (IN) :: iflag_mix
172	INTEGER, INTENT (IN) :: iflag_ice_thermo
173	INTEGER, INTENT (IN) :: iflag_clos
174	LOGICAL, INTENT (IN) :: ok_conserv_q
175	REAL, INTENT (IN) :: tau_cld_cv
176	REAL, INTENT (IN) :: coefw_cld_cv
177	REAL, INTENT (IN) :: delt
178	REAL, INTENT (IN) :: comp_threshold
179	REAL, DIMENSION (len, nd), INTENT (IN) :: t1
180	REAL, DIMENSION (len, nd), INTENT (IN) :: q1
181	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1
182	REAL, DIMENSION (len, nd), INTENT (IN) :: t1_wake
183	REAL, DIMENSION (len, nd), INTENT (IN) :: q1_wake
184	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1_wake
185	REAL, DIMENSION (len), INTENT (IN) :: s1_wake
186	REAL, DIMENSION (len, nd), INTENT (IN) :: u1
187	REAL, DIMENSION (len, nd), INTENT (IN) :: v1
188	REAL, DIMENSION (len, nd, ntra), INTENT (IN) :: tra1
189	REAL, DIMENSION (len, nd), INTENT (IN) :: p1
190	REAL, DIMENSION (len, ndp1), INTENT (IN) :: ph1
191	REAL, DIMENSION (len), INTENT (IN) :: Ale1
192	REAL, DIMENSION (len), INTENT (IN) :: Alp1
193	REAL, DIMENSION (len, nd), INTENT (IN) :: omega1
194	REAL, INTENT (IN) :: sig1feed1 ! pressure at lower bound of feeding layer
195	REAL, INTENT (IN) :: sig2feed1 ! pressure at upper bound of feeding layer
196	REAL, DIMENSION (nd), INTENT (IN) :: wght1 ! weight density determining the feeding mixture
197	INTEGER, DIMENSION (len), INTENT (IN) :: lalim_conv1
198
199	! Input/Output
200	REAL, DIMENSION (len, nd), INTENT (INOUT) :: sig1
201	REAL, DIMENSION (len, nd), INTENT (INOUT) :: w01
202
203	! Output
204	INTEGER, DIMENSION (len), INTENT (OUT) :: iflag1
205	REAL, DIMENSION (len, nd), INTENT (OUT) :: ft1
206	REAL, DIMENSION (len, nd), INTENT (OUT) :: fq1
207	REAL, DIMENSION (len, nd), INTENT (OUT) :: fu1
208	REAL, DIMENSION (len, nd), INTENT (OUT) :: fv1
209	REAL, DIMENSION (len, nd, ntra), INTENT (OUT) :: ftra1
210	REAL, DIMENSION (len), INTENT (OUT) :: precip1
211	INTEGER, DIMENSION (len), INTENT (OUT) :: kbas1
212	INTEGER, DIMENSION (len), INTENT (OUT) :: ktop1
213	REAL, DIMENSION (len), INTENT (OUT) :: cbmf1
214	REAL, DIMENSION (len), INTENT (OUT) :: plcl1
215	REAL, DIMENSION (len), INTENT (OUT) :: plfc1
216	REAL, DIMENSION (len), INTENT (OUT) :: wbeff1
217	REAL, DIMENSION (len), INTENT (OUT) :: ptop21
218	REAL, DIMENSION (len), INTENT (OUT) :: sigd1
219	REAL, DIMENSION (len, nd), INTENT (OUT) :: ma1
220	REAL, DIMENSION (len, nd), INTENT (OUT) :: mip1
221	! real Vprecip1(len,nd)
222	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecip1
223	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecipi1
224	REAL, DIMENSION (len, nd), INTENT (OUT) :: upwd1
225	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd1
226	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd01
227	REAL, DIMENSION (len, nd), INTENT (OUT) :: qcondc1 ! cld
228	REAL, DIMENSION (len), INTENT (OUT) :: wd1 ! gust
229	REAL, DIMENSION (len), INTENT (OUT) :: cape1
230	REAL, DIMENSION (len), INTENT (OUT) :: cin1
231	REAL, DIMENSION (len, nd), INTENT (OUT) :: tvp1
232
233	!AC!
234	!! real da1(len,nd),phi1(len,nd,nd)
235	!! real da(len,nd),phi(len,nd,nd)
236	!AC!
237	REAL, DIMENSION (len, nd), INTENT (OUT) :: ftd1
238	REAL, DIMENSION (len, nd), INTENT (OUT) :: fqd1
239	REAL, DIMENSION (len), INTENT (OUT) :: Plim11
240	REAL, DIMENSION (len), INTENT (OUT) :: Plim21
241	REAL, DIMENSION (len, nd), INTENT (OUT) :: asupmax1
242	REAL, DIMENSION (len), INTENT (OUT) :: supmax01
243	REAL, DIMENSION (len), INTENT (OUT) :: asupmaxmin1
244	REAL, DIMENSION (len, nd), INTENT (OUT) :: qtc1 ! cld
245	REAL, DIMENSION (len, nd), INTENT (OUT) :: sigt1 ! cld
246
247	! RomP >>>
248	REAL, DIMENSION (len, nd), INTENT (OUT) :: wdtrainA1, wdtrainM1
249	REAL, DIMENSION (len, nd), INTENT (OUT) :: da1, mp1
250	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi1
251	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: epmlmMm1
252	REAL, DIMENSION (len, nd), INTENT (OUT) :: eplaMm1
253	REAL, DIMENSION (len, nd), INTENT (OUT) :: evap1, ep1
254	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: sigij1, elij1
255	!JYG,RL
256	REAL, DIMENSION (len, nd), INTENT (OUT) :: wghti1 ! final weight of the feeding layers
257	!JYG,RL
258	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi21
259	REAL, DIMENSION (len, nd), INTENT (OUT) :: d1a1, dam1
260	! RomP <<<
261
262	! -------------------------------------------------------------------
263	! Prolog by Kerry Emanuel.
264	! -------------------------------------------------------------------
265	! --- ARGUMENTS
266	! -------------------------------------------------------------------
267	! --- On input:
268
269	! t: Array of absolute temperature (K) of dimension ND, with first
270	! index corresponding to lowest model level. Note that this array
271	! will be altered by the subroutine if dry convective adjustment
272	! occurs and if IPBL is not equal to 0.
273
274	! q: Array of specific humidity (gm/gm) of dimension ND, with first
275	! index corresponding to lowest model level. Must be defined
276	! at same grid levels as T. Note that this array will be altered
277	! if dry convective adjustment occurs and if IPBL is not equal to 0.
278
279	! qs: Array of saturation specific humidity of dimension ND, with first
280	! index corresponding to lowest model level. Must be defined
281	! at same grid levels as T. Note that this array will be altered
282	! if dry convective adjustment occurs and if IPBL is not equal to 0.
283
284	! t_wake: Array of absolute temperature (K), seen by unsaturated draughts,
285	! of dimension ND, with first index corresponding to lowest model level.
286
287	! q_wake: Array of specific humidity (gm/gm), seen by unsaturated draughts,
288	! of dimension ND, with first index corresponding to lowest model level.
289	! Must be defined at same grid levels as T.
290
291	! qs_wake: Array of saturation specific humidity, seen by unsaturated draughts,
292	! of dimension ND, with first index corresponding to lowest model level.
293	! Must be defined at same grid levels as T.
294
295	! s_wake: Array of fractionnal area occupied by the wakes.
296
297	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
298	! index corresponding with the lowest model level. Defined at
299	! same levels as T. Note that this array will be altered if
300	! dry convective adjustment occurs and if IPBL is not equal to 0.
301
302	! v: Same as u but for meridional velocity.
303
304	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
305	! where NTRA is the number of different tracers. If no
306	! convective tracer transport is needed, define a dummy
307	! input array of dimension (ND,1). Tracers are defined at
308	! same vertical levels as T. Note that this array will be altered
309	! if dry convective adjustment occurs and if IPBL is not equal to 0.
310
311	! p: Array of pressure (mb) of dimension ND, with first
312	! index corresponding to lowest model level. Must be defined
313	! at same grid levels as T.
314
315	! ph: Array of pressure (mb) of dimension ND+1, with first index
316	! corresponding to lowest level. These pressures are defined at
317	! levels intermediate between those of P, T, Q and QS. The first
318	! value of PH should be greater than (i.e. at a lower level than)
319	! the first value of the array P.
320
321	! ALE: Available lifting Energy
322
323	! ALP: Available lifting Power
324
325	! nl: The maximum number of levels to which convection can penetrate, plus 1.
326	! NL MUST be less than or equal to ND-1.
327
328	! delt: The model time step (sec) between calls to CONVECT
329
330	! ----------------------------------------------------------------------------
331	! --- On Output:
332
333	! iflag: An output integer whose value denotes the following:
334	! VALUE INTERPRETATION
335	! ----- --------------
336	! 0 Moist convection occurs.
337	! 1 Moist convection occurs, but a CFL condition
338	! on the subsidence warming is violated. This
339	! does not cause the scheme to terminate.
340	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
341	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
342	! 4 No moist convection; atmosphere is not
343	! unstable
344	! 6 No moist convection because ihmin le minorig.
345	! 7 No moist convection because unreasonable
346	! parcel level temperature or specific humidity.
347	! 8 No moist convection: lifted condensation
348	! level is above the 200 mb level.
349	! 9 No moist convection: cloud base is higher
350	! then the level NL-1.
351
352	! ft: Array of temperature tendency (K/s) of dimension ND, defined at same
353	! grid levels as T, Q, QS and P.
354
355	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
356	! defined at same grid levels as T, Q, QS and P.
357
358	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
359	! defined at same grid levels as T.
360
361	! fv: Same as FU, but for forcing of meridional velocity.
362
363	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
364	! second, defined at same levels as T. Dimensioned (ND,NTRA).
365
366	! precip: Scalar convective precipitation rate (mm/day).
367
368	! wd: A convective downdraft velocity scale. For use in surface
369	! flux parameterizations. See convect.ps file for details.
370
371	! tprime: A convective downdraft temperature perturbation scale (K).
372	! For use in surface flux parameterizations. See convect.ps
373	! file for details.
374
375	! qprime: A convective downdraft specific humidity
376	! perturbation scale (gm/gm).
377	! For use in surface flux parameterizations. See convect.ps
378	! file for details.
379
380	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
381	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
382	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
383	! by the calling program between calls to CONVECT.
384
385	! det: Array of detrainment mass flux of dimension ND.
386	! -------------------------------------------------------------------
387
388	! Local (non compressed) arrays
389
390
391	INTEGER i, k, n, il, j
392	INTEGER nword1, nword2, nword3, nword4
393	INTEGER icbmax
394	INTEGER nk1(klon)
395	INTEGER icb1(klon)
396	INTEGER icbs1(klon)
397
398	LOGICAL ok_inhib ! True => possible inhibition of convection by dryness
399	LOGICAL, SAVE :: debut = .TRUE.
400	!$OMP THREADPRIVATE(debut)
401
402	REAL coef_convective(len) ! = 1 for convective points, = 0 otherwise
403	REAL tnk1(klon)
404	REAL thnk1(klon)
405	REAL qnk1(klon)
406	REAL gznk1(klon)
407	REAL pnk1(klon)
408	REAL qsnk1(klon)
409	REAL unk1(klon)
410	REAL vnk1(klon)
411	REAL cpnk1(klon)
412	REAL hnk1(klon)
413	REAL pbase1(klon)
414	REAL buoybase1(klon)
415
416	REAL lf1(klon, klev), lf1_wake(klon, klev)
417	REAL lv1(klon, klev), lv1_wake(klon, klev)
418	REAL cpn1(klon, klev), cpn1_wake(klon, klev)
419	REAL tv1(klon, klev), tv1_wake(klon, klev)
420	REAL gz1(klon, klev), gz1_wake(klon, klev)
421	REAL hm1(klon, klev), hm1_wake(klon, klev)
422	REAL h1(klon, klev), h1_wake(klon, klev)
423	REAL tp1(klon, klev)
424	REAL clw1(klon, klev)
425	REAL th1(klon, klev), th1_wake(klon, klev)
426
427	REAL bid(klon, klev) ! dummy array
428
429	INTEGER ncum
430
431	INTEGER j1feed(klon)
432	INTEGER j2feed(klon)
433	REAL p1feed1(len) ! pressure at lower bound of feeding layer
434	REAL p2feed1(len) ! pressure at upper bound of feeding layer
435	!JYG,RL
436	!! real wghti1(len,nd) ! weights of the feeding layers
437	!JYG,RL
438
439	! (local) compressed fields:
440
441
442	INTEGER idcum(nloc)
443	!jyg<
444	LOGICAL compress ! True if compression occurs
445	!>jyg
446	INTEGER iflag(nloc), nk(nloc), icb(nloc)
447	INTEGER nent(nloc, klev)
448	INTEGER icbs(nloc)
449	INTEGER inb(nloc), inbis(nloc)
450
451	REAL cbmf(nloc), plcl(nloc), plfc(nloc), wbeff(nloc)
452	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
453	REAL t_wake(nloc, klev), q_wake(nloc, klev), qs_wake(nloc, klev)
454	REAL s_wake(nloc)
455	REAL u(nloc, klev), v(nloc, klev)
456	REAL gz(nloc, klev), h(nloc, klev), hm(nloc, klev)
457	REAL h_wake(nloc, klev), hm_wake(nloc, klev)
458	REAL lv(nloc, klev), lf(nloc, klev), cpn(nloc, klev)
459	REAL lv_wake(nloc, klev), lf_wake(nloc, klev), cpn_wake(nloc, klev)
460	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
461	REAL tv_wake(nloc, klev)
462	REAL clw(nloc, klev)
463	REAL dph(nloc, klev)
464	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
465	REAL th_wake(nloc, klev)
466	REAL tvp(nloc, klev)
467	REAL sig(nloc, klev), w0(nloc, klev), ptop2(nloc)
468	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
469	REAL buoy(nloc, klev)
470	REAL cape(nloc)
471	REAL cin(nloc)
472	REAL m(nloc, klev)
473	REAL ment(nloc, klev, klev), sigij(nloc, klev, klev)
474	REAL qent(nloc, klev, klev)
475	REAL hent(nloc, klev, klev)
476	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
477	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
478	REAL elij(nloc, klev, klev)
479	REAL supmax(nloc, klev)
480	REAL Ale(nloc), Alp(nloc), coef_clos(nloc)
481	REAL omega(nloc,klev)
482	REAL sigd(nloc)
483	! real mp(nloc,klev), qp(nloc,klev), up(nloc,klev), vp(nloc,klev)
484	! real wt(nloc,klev), water(nloc,klev), evap(nloc,klev), ice(nloc,klev)
485	! real b(nloc,klev), sigd(nloc)
486	! save mp,qp,up,vp,wt,water,evap,b
487	REAL, SAVE, ALLOCATABLE :: mp(:, :), qp(:, :), up(:, :), vp(:, :)
488	REAL, SAVE, ALLOCATABLE :: wt(:, :), water(:, :), evap(:, :)
489	REAL, SAVE, ALLOCATABLE :: ice(:, :), fondue(:, :), b(:, :)
490	REAL, SAVE, ALLOCATABLE :: frac(:, :), faci(:, :)
491	!$OMP THREADPRIVATE(mp,qp,up,vp,wt,water,evap,ice,fondue,b,frac,faci)
492	REAL ft(nloc, klev), fq(nloc, klev)
493	REAL ftd(nloc, klev), fqd(nloc, klev)
494	REAL fu(nloc, klev), fv(nloc, klev)
495	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
496	REAL ma(nloc, klev), mip(nloc, klev)
497	!! REAL tls(nloc, klev), tps(nloc, klev) ! unused . jyg
498	REAL qprime(nloc), tprime(nloc)
499	REAL precip(nloc)
500	! real Vprecip(nloc,klev)
501	REAL vprecip(nloc, klev+1)
502	REAL vprecipi(nloc, klev+1)
503	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
504	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
505	REAL qcondc(nloc, klev) ! cld
506	REAL wd(nloc) ! gust
507	REAL Plim1(nloc), plim2(nloc)
508	REAL asupmax(nloc, klev)
509	REAL supmax0(nloc)
510	REAL asupmaxmin(nloc)
511
512	REAL tnk(nloc), qnk(nloc), gznk(nloc)
513	REAL wghti(nloc, nd)
514	REAL hnk(nloc), unk(nloc), vnk(nloc)
515
516	REAL qtc(nloc, klev) ! cld
517	REAL sigt(nloc, klev) ! cld
518
519	! RomP >>>
520	REAL wdtrainA(nloc, klev), wdtrainM(nloc, klev)
521	REAL da(len, nd), phi(len, nd, nd)
522	REAL epmlmMm(nloc, klev, klev), eplaMm(nloc, klev)
523	REAL phi2(len, nd, nd)
524	REAL d1a(len, nd), dam(len, nd)
525	! RomP <<<
526
527	LOGICAL, SAVE :: first = .TRUE.
528	!$OMP THREADPRIVATE(first)
529	CHARACTER (LEN=20) :: modname = 'cva_driver'
530	CHARACTER (LEN=80) :: abort_message
531
532
533	! print *, 't1, t1_wake ',(k,t1(1,k),t1_wake(1,k),k=1,klev)
534	! print *, 'q1, q1_wake ',(k,q1(1,k),q1_wake(1,k),k=1,klev)
535
536	! -------------------------------------------------------------------
537	! --- SET CONSTANTS AND PARAMETERS
538	! -------------------------------------------------------------------
539
540	IF (first) THEN
541	ALLOCATE (mp(nloc,klev), qp(nloc,klev), up(nloc,klev))
542	ALLOCATE (vp(nloc,klev), wt(nloc,klev), water(nloc,klev))
543	ALLOCATE (ice(nloc,klev), fondue(nloc,klev))
544	ALLOCATE (evap(nloc,klev), b(nloc,klev))
545	ALLOCATE (frac(nloc,klev), faci(nloc,klev))
546	first = .FALSE.
547	END IF
548	! -- set simulation flags:
549	! (common cvflag)
550
551	CALL cv_flag(iflag_ice_thermo)
552
553	! -- set thermodynamical constants:
554	! (common cvthermo)
555
556	CALL cv_thermo(iflag_con)
557
558	! -- set convect parameters
559
560	! includes microphysical parameters and parameters that
561	! control the rate of approach to quasi-equilibrium)
562	! (common cvparam)
563
564	IF (iflag_con==3) THEN
565	CALL cv3_param(nd, k_upper, delt)
566
567	END IF
568
569	IF (iflag_con==4) THEN
570	CALL cv_param(nd)
571	END IF
572
573	! ---------------------------------------------------------------------
574	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
575	! ---------------------------------------------------------------------
576	nword1 = len
577	nword2 = len*nd
578	nword3 = lenndntra
579	nword4 = lenndnd
580
581	iflag1(:) = 0
582	ktop1(:) = 0
583	kbas1(:) = 0
584	ft1(:, :) = 0.0
585	fq1(:, :) = 0.0
586	fu1(:, :) = 0.0
587	fv1(:, :) = 0.0
588	ftra1(:, :, :) = 0.
589	precip1(:) = 0.
590	cbmf1(:) = 0.
591	ptop21(:) = 0.
592	sigd1(:) = 0.
593	ma1(:, :) = 0.
594	mip1(:, :) = 0.
595	vprecip1(:, :) = 0.
596	vprecipi1(:, :) = 0.
597	upwd1(:, :) = 0.
598	dnwd1(:, :) = 0.
599	dnwd01(:, :) = 0.
600	qcondc1(:, :) = 0.
601	wd1(:) = 0.
602	cape1(:) = 0.
603	cin1(:) = 0.
604	tvp1(:, :) = 0.
605	ftd1(:, :) = 0.
606	fqd1(:, :) = 0.
607	Plim11(:) = 0.
608	Plim21(:) = 0.
609	asupmax1(:, :) = 0.
610	supmax01(:) = 0.
611	asupmaxmin1(:) = 0.
612
613	DO il = 1, len
614	cin1(il) = -100000.
615	cape1(il) = -1.
616	END DO
617
618	IF (iflag_con==3) THEN
619	DO il = 1, len
620	sig1(il, nd) = sig1(il, nd) + 1.
621	sig1(il, nd) = amin1(sig1(il,nd), 12.1)
622	END DO
623	END IF
624
625	! RomP >>>
626	sigt1(:, :) = 0.
627	qtc1(:, :) = 0.
628	wdtrainA1(:, :) = 0.
629	wdtrainM1(:, :) = 0.
630	da1(:, :) = 0.
631	phi1(:, :, :) = 0.
632	epmlmMm1(:, :, :) = 0.
633	eplaMm1(:, :) = 0.
634	mp1(:, :) = 0.
635	evap1(:, :) = 0.
636	ep1(:, :) = 0.
637	sigij1(:, :, :) = 0.
638	elij1(:, :, :) = 0.
639	phi21(:, :, :) = 0.
640	d1a1(:, :) = 0.
641	dam1(:, :) = 0.
642	! RomP <<<
643	! ---------------------------------------------------------------------
644	! --- INITIALIZE LOCAL ARRAYS AND PARAMETERS
645	! ---------------------------------------------------------------------
646
647	DO il = 1, nloc
648	coef_clos(il) = 1.
649	END DO
650
651	! --------------------------------------------------------------------
652	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
653	! --------------------------------------------------------------------
654
655	IF (iflag_con==3) THEN
656
657	IF (debut) THEN
658	PRINT *, 'Emanuel version 3 nouvelle'
659	END IF
660	! print*,'t1, q1 ',t1,q1
661	CALL cv3_prelim(len, nd, ndp1, t1, q1, p1, ph1, & ! nd->na
662	lv1, lf1, cpn1, tv1, gz1, h1, hm1, th1)
663
664
665	CALL cv3_prelim(len, nd, ndp1, t1_wake, q1_wake, p1, ph1, & ! nd->na
666	lv1_wake, lf1_wake, cpn1_wake, tv1_wake, gz1_wake, &
667	h1_wake, bid, th1_wake)
668
669	END IF
670
671	IF (iflag_con==4) THEN
672	PRINT *, 'Emanuel version 4 '
673	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, &
674	lv1, cpn1, tv1, gz1, h1, hm1)
675	END IF
676
677	! --------------------------------------------------------------------
678	! --- CONVECTIVE FEED
679	! --------------------------------------------------------------------
680
681	! compute feeding layer potential temperature and mixing ratio :
682
683	! get bounds of feeding layer
684
685	! test niveaux couche alimentation KE
686	IF (sig1feed1==sig2feed1) THEN
687	WRITE (lunout, *) 'impossible de choisir sig1feed=sig2feed'
688	WRITE (lunout, *) 'changer la valeur de sig2feed dans physiq.def'
689	abort_message = ''
690	CALL abort_physic(modname, abort_message, 1)
691	END IF
692
693	DO i = 1, len
694	p1feed1(i) = sig1feed1*ph1(i, 1)
695	p2feed1(i) = sig2feed1*ph1(i, 1)
696	!test maf
697	! p1feed1(i)=ph1(i,1)
698	! p2feed1(i)=ph1(i,2)
699	! p2feed1(i)=ph1(i,3)
700	!testCR: on prend la couche alim des thermiques
701	! p2feed1(i)=ph1(i,lalim_conv1(i)+1)
702	! print*,'lentr=',lentr(i),ph1(i,lentr(i)+1),ph1(i,2)
703	END DO
704
705	IF (iflag_con==3) THEN
706	END IF
707	DO i = 1, len
708	! print*,'avant cv3_feed Plim',p1feed1(i),p2feed1(i)
709	END DO
710	IF (iflag_con==3) THEN
711
712	! print*, 'IFLAG1 avant cv3_feed'
713	! print*,'len,nd',len,nd
714	! write(*,'(64i1)') iflag1(2:klon-1)
715
716	CALL cv3_feed(len, nd, ok_conserv_q, & ! nd->na
717	t1, q1, u1, v1, p1, ph1, hm1, gz1, &
718	p1feed1, p2feed1, wght1, &
719	wghti1, tnk1, thnk1, qnk1, qsnk1, unk1, vnk1, &
720	cpnk1, hnk1, nk1, icb1, icbmax, iflag1, gznk1, plcl1)
721	END IF
722
723	! print*, 'IFLAG1 apres cv3_feed'
724	! print*,'len,nd',len,nd
725	! write(*,'(64i1)') iflag1(2:klon-1)
726
727	IF (iflag_con==4) THEN
728	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, &
729	nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1)
730	END IF
731
732	! print *, 'cv3_feed-> iflag1, plcl1 ',iflag1(1),plcl1(1)
733
734	! --------------------------------------------------------------------
735	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
736	! (up through ICB for convect4, up through ICB+1 for convect3)
737	! Calculates the lifted parcel virtual temperature at nk, the
738	! actual temperature, and the adiabatic liquid water content.
739	! --------------------------------------------------------------------
740
741	IF (iflag_con==3) THEN
742
743	CALL cv3_undilute1(len, nd, t1, qs1, gz1, plcl1, p1, icb1, tnk1, qnk1, & ! nd->na
744	gznk1, tp1, tvp1, clw1, icbs1)
745	END IF
746
747
748	IF (iflag_con==4) THEN
749	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, &
750	tp1, tvp1, clw1)
751	END IF
752
753	! -------------------------------------------------------------------
754	! --- TRIGGERING
755	! -------------------------------------------------------------------
756
757	! print *,' avant triggering, iflag_con ',iflag_con
758
759	IF (iflag_con==3) THEN
760
761	CALL cv3_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1, thnk1, & ! nd->na
762	pbase1, buoybase1, iflag1, sig1, w01)
763
764
765	! print*, 'IFLAG1 apres cv3_triger'
766	! print*,'len,nd',len,nd
767	! write(*,'(64i1)') iflag1(2:klon-1)
768
769	! call dump2d(iim,jjm-1,sig1(2)
770	END IF
771
772	IF (iflag_con==4) THEN
773	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
774	END IF
775
776
777	! =====================================================================
778	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
779	! =====================================================================
780
781	! Determine the number "ncum" of convective gridpoints, the list "idcum" of convective
782	! gridpoints and the weights "coef_convective" (= 1. for convective gridpoints and = 0.
783	! elsewhere).
784	ncum = 0
785	coef_convective(:) = 0.
786	DO i = 1, len
787	IF (iflag1(i)==0) THEN
788	coef_convective(i) = 1.
789	ncum = ncum + 1
790	idcum(ncum) = i
791	END IF
792	END DO
793
794	! print*,'klon, ncum = ',len,ncum
795
796	IF (ncum>0) THEN
797
798	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
799	! --- COMPRESS THE FIELDS
800	! (-> vectorization over convective gridpoints)
801	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
802
803	IF (iflag_con==3) THEN
804	! print*,'ncum tv1 ',ncum,tv1
805	! print*,'tvp1 ',tvp1
806	!jyg<
807	! If the fraction of convective points is larger than comp_threshold, then compression
808	! is assumed useless.
809	!
810	compress = ncum .lt. len*comp_threshold
811	!
812	IF (.not. compress) THEN
813	DO i = 1,len
814	idcum(i) = i
815	ENDDO
816	ENDIF
817	!
818	!>jyg
819	CALL cv3a_compress(len, nloc, ncum, nd, ntra, compress, &
820	iflag1, nk1, icb1, icbs1, &
821	plcl1, tnk1, qnk1, gznk1, hnk1, unk1, vnk1, &
822	wghti1, pbase1, buoybase1, &
823	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, &
824	u1, v1, gz1, th1, th1_wake, &
825	tra1, &
826	h1, lv1, lf1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
827	h1_wake, lv1_wake, lf1_wake, cpn1_wake, tv1_wake, &
828	sig1, w01, ptop21, &
829	Ale1, Alp1, omega1, &
830	iflag, nk, icb, icbs, &
831	plcl, tnk, qnk, gznk, hnk, unk, vnk, &
832	wghti, pbase, buoybase, &
833	t, q, qs, t_wake, q_wake, qs_wake, s_wake, &
834	u, v, gz, th, th_wake, &
835	tra, &
836	h, lv, lf, cpn, p, ph, tv, tp, tvp, clw, &
837	h_wake, lv_wake, lf_wake, cpn_wake, tv_wake, &
838	sig, w0, ptop2, &
839	Ale, Alp, omega)
840
841	! print*,'tv ',tv
842	! print*,'tvp ',tvp
843
844	END IF
845
846	IF (iflag_con==4) THEN
847	CALL cv_compress(len, nloc, ncum, nd, &
848	iflag1, nk1, icb1, &
849	cbmf1, plcl1, tnk1, qnk1, gznk1, &
850	t1, q1, qs1, u1, v1, gz1, &
851	h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
852	iflag, nk, icb, &
853	cbmf, plcl, tnk, qnk, gznk, &
854	t, q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, &
855	dph)
856	END IF
857
858	! -------------------------------------------------------------------
859	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
860	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
861	! --- &
862	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
863	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
864	! --- &
865	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
866	! -------------------------------------------------------------------
867
868	IF (iflag_con==3) THEN
869	CALL cv3_undilute2(nloc, ncum, nd, icb, icbs, nk, & !na->nd
870	tnk, qnk, gznk, hnk, t, q, qs, gz, &
871	p, h, tv, lv, lf, pbase, buoybase, plcl, &
872	inb, tp, tvp, clw, hp, ep, sigp, buoy, &
873	frac)
874	END IF
875
876	IF (iflag_con==4) THEN
877	CALL cv_undilute2(nloc, ncum, nd, icb, nk, &
878	tnk, qnk, gznk, t, q, qs, gz, &
879	p, dph, h, tv, lv, &
880	inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
881	END IF
882
883	! -------------------------------------------------------------------
884	! --- MIXING(1) (if iflag_mix .ge. 1)
885	! -------------------------------------------------------------------
886	IF (iflag_con==3) THEN
887	IF ((iflag_ice_thermo==1) .AND. (iflag_mix/=0)) THEN
888	WRITE (, ) ' iflag_ice_thermo==1 requires iflag_mix==0', ' but iflag_mix=', iflag_mix, &
889	'. Might as well stop here.'
890	STOP
891	END IF
892	IF (iflag_mix>=1) THEN
893	CALL zilch(supmax, nloc*klev)
894	CALL cv3p_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
895	ph, t, q, qs, u, v, tra, h, lv, qnk, &
896	unk, vnk, hp, tv, tvp, ep, clw, sig, &
897	ment, qent, hent, uent, vent, nent, &
898	sigij, elij, supmax, ments, qents, traent)
899	! print*, 'cv3p_mixing-> supmax ', (supmax(1,k), k=1,nd)
900
901	ELSE
902	CALL zilch(supmax, nloc*klev)
903	END IF
904	END IF
905	! -------------------------------------------------------------------
906	! --- CLOSURE
907	! -------------------------------------------------------------------
908
909
910	IF (iflag_con==3) THEN
911	IF (iflag_clos==0) THEN
912	CALL cv3_closure(nloc, ncum, nd, icb, inb, & ! na->nd
913	pbase, p, ph, tv, buoy, &
914	sig, w0, cape, m, iflag)
915	END IF
916
917	ok_inhib = iflag_mix == 2
918
919	IF (iflag_clos==1) THEN
920	PRINT *, ' pas d appel cv3p_closure'
921	! c CALL cv3p_closure(nloc,ncum,nd,icb,inb ! na->nd
922	! c : ,pbase,plcl,p,ph,tv,tvp,buoy
923	! c : ,supmax
924	! c o ,sig,w0,ptop2,cape,cin,m)
925	END IF
926	IF (iflag_clos==2) THEN
927	CALL cv3p1_closure(nloc, ncum, nd, icb, inb, & ! na->nd
928	pbase, plcl, p, ph, tv, tvp, buoy, &
929	supmax, ok_inhib, Ale, Alp, omega, &
930	sig, w0, ptop2, cape, cin, m, iflag, coef_clos, &
931	Plim1, plim2, asupmax, supmax0, &
932	asupmaxmin, cbmf, plfc, wbeff)
933	if (prt_level >= 10) &
934	PRINT *, 'cv3p1_closure-> plfc,wbeff ', plfc(1), wbeff(1)
935	END IF
936	END IF ! iflag_con.eq.3
937
938	IF (iflag_con==4) THEN
939	CALL cv_closure(nloc, ncum, nd, nk, icb, &
940	tv, tvp, p, ph, dph, plcl, cpn, &
941	iflag, cbmf)
942	END IF
943
944	! print *,'cv_closure-> cape ',cape(1)
945
946	! -------------------------------------------------------------------
947	! --- MIXING(2)
948	! -------------------------------------------------------------------
949
950	IF (iflag_con==3) THEN
951	IF (iflag_mix==0) THEN
952	CALL cv3_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
953	ph, t, q, qs, u, v, tra, h, lv, lf, frac, qnk, &
954	unk, vnk, hp, tv, tvp, ep, clw, m, sig, &
955	ment, qent, uent, vent, nent, sigij, elij, ments, qents, traent)
956	CALL zilch(hent, nlocklevklev)
957	ELSE
958	CALL cv3_mixscale(nloc, ncum, nd, ment, m)
959	IF (debut) THEN
960	PRINT *, ' cv3_mixscale-> '
961	END IF !(debut) THEN
962	END IF
963	END IF
964
965	IF (iflag_con==4) THEN
966	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, &
967	ph, t, q, qs, u, v, h, lv, qnk, &
968	hp, tv, tvp, ep, clw, cbmf, &
969	m, ment, qent, uent, vent, nent, sigij, elij)
970	END IF
971
972	IF (debut) THEN
973	PRINT *, ' cv_mixing ->'
974	END IF !(debut) THEN
975	! do i = 1,klev
976	! print*,'cv_mixing-> i,ment ',i,(ment(1,i,j),j=1,klev)
977	! enddo
978
979	! -------------------------------------------------------------------
980	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
981	! -------------------------------------------------------------------
982	IF (iflag_con==3) THEN
983	IF (debut) THEN
984	PRINT *, ' cva_driver -> cv3_unsat '
985	END IF !(debut) THEN
986
987	CALL cv3_unsat(nloc, ncum, nd, nd, ntra, icb, inb, iflag, & ! na->nd
988	t_wake, q_wake, qs_wake, gz, u, v, tra, p, ph, &
989	th_wake, tv_wake, lv_wake, lf_wake, cpn_wake, &
990	ep, sigp, clw, &
991	m, ment, elij, delt, plcl, coef_clos, &
992	mp, qp, up, vp, trap, wt, water, evap, fondue, ice, &
993	faci, b, sigd, &
994	wdtrainA, wdtrainM) ! RomP
995	END IF
996
997	IF (iflag_con==4) THEN
998	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, &
999	h, lv, ep, sigp, clw, m, ment, elij, &
1000	iflag, mp, qp, up, vp, wt, water, evap)
1001	END IF
1002
1003	IF (debut) THEN
1004	PRINT *, 'cv_unsat-> '
1005	END IF !(debut) THEN
1006
1007	! print *,'cv_unsat-> mp ',mp
1008	! print *,'cv_unsat-> water ',water
1009	! -------------------------------------------------------------------
1010	! --- YIELD
1011	! (tendencies, precipitation, variables of interface with other
1012	! processes, etc)
1013	! -------------------------------------------------------------------
1014
1015	IF (iflag_con==3) THEN
1016
1017	CALL cv3_yield(nloc, ncum, nd, nd, ntra, ok_conserv_q, & ! na->nd
1018	icb, inb, delt, &
1019	t, q, t_wake, q_wake, s_wake, u, v, tra, &
1020	gz, p, ph, h, hp, lv, lf, cpn, th, th_wake, &
1021	ep, clw, m, tp, mp, qp, up, vp, trap, &
1022	wt, water, ice, evap, fondue, faci, b, sigd, &
1023	ment, qent, hent, iflag_mix, uent, vent, &
1024	nent, elij, traent, sig, &
1025	tv, tvp, wghti, &
1026	iflag, precip, Vprecip, Vprecipi, ft, fq, fu, fv, ftra, & ! jyg
1027	cbmf, upwd, dnwd, dnwd0, ma, mip, &
1028	!! tls, tps, & ! useless . jyg
1029	qcondc, wd, &
1030	ftd, fqd, qnk, qtc, sigt, tau_cld_cv, coefw_cld_cv)
1031	END IF
1032
1033	IF (debut) THEN
1034	PRINT *, ' cv3_yield -> fqd(1) = ', fqd(1, 1)
1035	END IF !(debut) THEN
1036
1037	IF (iflag_con==4) THEN
1038	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, &
1039	t, q, u, v, &
1040	gz, p, ph, h, hp, lv, cpn, &
1041	ep, clw, frac, m, mp, qp, up, vp, &
1042	wt, water, evap, &
1043	ment, qent, uent, vent, nent, elij, &
1044	tv, tvp, &
1045	iflag, wd, qprime, tprime, &
1046	precip, cbmf, ft, fq, fu, fv, ma, qcondc)
1047	END IF
1048
1049	!AC!
1050	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1051	!--- passive tracers
1052	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1053
1054	IF (iflag_con==3) THEN
1055	!RomP >>>
1056	CALL cv3_tracer(nloc, len, ncum, nd, nd, &
1057	ment, sigij, da, phi, phi2, d1a, dam, &
1058	ep, vprecip, elij, clw, epmlmMm, eplaMm, &
1059	icb, inb)
1060	!RomP <<<
1061	END IF
1062
1063	!AC!
1064
1065	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1066	! --- UNCOMPRESS THE FIELDS
1067	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1068
1069
1070	IF (iflag_con==3) THEN
1071	CALL cv3a_uncompress(nloc, len, ncum, nd, ntra, idcum, compress, &
1072	iflag, icb, inb, &
1073	precip, cbmf, plcl, plfc, wbeff, sig, w0, ptop2, &
1074	ft, fq, fu, fv, ftra, &
1075	sigd, ma, mip, vprecip, vprecipi, upwd, dnwd, dnwd0, &
1076	qcondc, wd, cape, cin, &
1077	tvp, &
1078	ftd, fqd, &
1079	Plim1, plim2, asupmax, supmax0, &
1080	asupmaxmin, &
1081	da, phi, mp, phi2, d1a, dam, sigij, & ! RomP
1082	clw, elij, evap, ep, epmlmMm, eplaMm, & ! RomP
1083	wdtrainA, wdtrainM, & ! RomP
1084	qtc, sigt, &
1085	iflag1, kbas1, ktop1, &
1086	precip1, cbmf1, plcl1, plfc1, wbeff1, sig1, w01, ptop21, &
1087	ft1, fq1, fu1, fv1, ftra1, &
1088	sigd1, ma1, mip1, vprecip1, vprecipi1, upwd1, dnwd1, dnwd01, &
1089	qcondc1, wd1, cape1, cin1, &
1090	tvp1, &
1091	ftd1, fqd1, &
1092	Plim11, plim21, asupmax1, supmax01, &
1093	asupmaxmin1, &
1094	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, & ! RomP
1095	clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP
1096	wdtrainA1, wdtrainM1, & ! RomP
1097	qtc1, sigt1)
1098	END IF
1099
1100	IF (iflag_con==4) THEN
1101	CALL cv_uncompress(nloc, len, ncum, nd, idcum, &
1102	iflag, &
1103	precip, cbmf, &
1104	ft, fq, fu, fv, &
1105	ma, qcondc, &
1106	iflag1, &
1107	precip1,cbmf1, &
1108	ft1, fq1, fu1, fv1, &
1109	ma1, qcondc1)
1110	END IF
1111
1112	END IF ! ncum>0
1113
1114	!
1115	! In order take into account the possibility of changing the compression,
1116	! reset m, sig and w0 to zero for non-convective points.
1117	DO k = 1,nd-1
1118	sig1(:, k) = sig1(:, k)*coef_convective(:)
1119	w01(:, k) = w01(:, k)*coef_convective(:)
1120	ENDDO
1121
1122	IF (debut) THEN
1123	PRINT *, ' cv_uncompress -> '
1124	debut = .FALSE.
1125	END IF !(debut) THEN
1126
1127
1128	RETURN
1129	END SUBROUTINE cva_driver

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format