Context Navigation

cv_driver.F90 @ 3157

Last change on this file since 3157 was 2481, checked in by fhourdin, 9 years ago
Introduction d'une dependance epmax=f(Cape) sur proposition de Camille Risi
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 25.3 KB

Rev	Line
[1992]	1
[524]	2	! $Header$
	3
[1992]	4	SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, &
	5	tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, &
	6	cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, &
	7	wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & !
	8	! RomP
	9	evap1, ep1, epmlmmm1, eplamm1, & ! RomP
[2481]	10	wdtraina1, wdtrainm1, & ! RomP
	11	epmax_diag1) ! epmax_cape
[524]	12
[1992]	13	USE dimphy
	14	IMPLICIT NONE
[524]	15
[1992]	16	! .............................START PROLOGUE............................
[524]	17
	18
[1992]	19	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a
	20	! "1" appended.
	21	! The "1" is removed for the corresponding compressed (local) variables.
[524]	22
[1992]	23	! PARAMETERS:
	24	! Name Type Usage Description
	25	! ---------- ---------- ------- ----------------------------
	26
	27	! len Integer Input first (i) dimension
	28	! nd Integer Input vertical (k) dimension
	29	! ndp1 Integer Input nd + 1
	30	! ntra Integer Input number of tracors
	31	! iflag_con Integer Input version of convect (3/4)
	32	! t1 Real Input temperature
	33	! q1 Real Input specific hum
	34	! qs1 Real Input sat specific hum
	35	! u1 Real Input u-wind
	36	! v1 Real Input v-wind
	37	! tra1 Real Input tracors
	38	! p1 Real Input full level pressure
	39	! ph1 Real Input half level pressure
	40	! iflag1 Integer Output flag for Emanuel conditions
	41	! ft1 Real Output temp tend
	42	! fq1 Real Output spec hum tend
	43	! fu1 Real Output u-wind tend
	44	! fv1 Real Output v-wind tend
	45	! ftra1 Real Output tracor tend
	46	! precip1 Real Output precipitation
	47	! VPrecip1 Real Output vertical profile of
	48	! precipitations
	49	! cbmf1 Real Output cloud base mass flux
	50	! sig1 Real In/Out section adiabatic updraft
	51	! w01 Real In/Out vertical velocity within adiab
	52	! updraft
	53	! delt Real Input time step
	54	! Ma1 Real Output mass flux adiabatic updraft
	55	! upwd1 Real Output total upward mass flux
	56	! (adiab+mixed)
	57	! dnwd1 Real Output saturated downward mass flux
	58	! (mixed)
	59	! dnwd01 Real Output unsaturated downward mass flux
	60	! qcondc1 Real Output in-cld mixing ratio of
	61	! condensed water
	62	! wd1 Real Output downdraft velocity scale for
	63	! sfc fluxes
	64	! cape1 Real Output CAPE
	65
	66	! wdtrainA1 Real Output precipitation detrained from
	67	! adiabatic draught;
	68	! used in tracer transport (cvltr)
	69	! wdtrainM1 Real Output precipitation detrained from mixed
	70	! draughts;
	71	! used in tracer transport (cvltr)
	72	! da1 Real Output used in tracer transport (cvltr)
	73	! phi1 Real Output used in tracer transport (cvltr)
	74	! mp1 Real Output used in tracer transport (cvltr)
	75
	76	! phi21 Real Output used in tracer transport (cvltr)
	77
	78	! d1a1 Real Output used in tracer transport (cvltr)
	79	! dam1 Real Output used in tracer transport (cvltr)
	80
	81	! evap1 Real Output
	82	! ep1 Real Output
	83	! sij1 Real Output
	84	! elij1 Real Output
	85
	86	! S. Bony, Mar 2002:
	87	! * Several modules corresponding to different physical processes
	88	! * Several versions of convect may be used:
	89	! - iflag_con=3: version lmd (previously named convect3)
	90	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
	91	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
	92	! S. Bony, Oct 2002:
	93	! * Vectorization of convect3 (ie version lmd)
	94
	95	! ..............................END PROLOGUE.............................
	96
	97
	98	! Input
	99	INTEGER len
	100	INTEGER nd
	101	INTEGER ndp1
	102	INTEGER noff
	103	INTEGER iflag_con
	104	INTEGER ntra
	105	REAL delt
	106	REAL t1(len, nd)
	107	REAL q1(len, nd)
	108	REAL qs1(len, nd)
	109	REAL u1(len, nd)
	110	REAL v1(len, nd)
	111	REAL tra1(len, nd, ntra)
	112	REAL p1(len, nd)
	113	REAL ph1(len, ndp1)
	114
	115	! Output
	116	INTEGER iflag1(len)
	117	REAL ft1(len, nd)
	118	REAL fq1(len, nd)
	119	REAL fu1(len, nd)
	120	REAL fv1(len, nd)
	121	REAL ftra1(len, nd, ntra)
	122	REAL precip1(len)
	123	REAL cbmf1(len)
	124	REAL sig1(klon, klev)
	125	REAL w01(klon, klev)
	126	REAL vprecip1(len, nd+1)
	127	REAL evap1(len, nd) !RomP
	128	REAL ep1(len, nd) !RomP
	129	REAL ma1(len, nd)
	130	REAL upwd1(len, nd)
	131	REAL dnwd1(len, nd)
	132	REAL dnwd01(len, nd)
	133
	134	REAL qcondc1(len, nd) ! cld
	135	REAL wd1(len) ! gust
	136	REAL cape1(len)
	137
	138	! RomP >>>
	139	REAL wdtraina1(len, nd), wdtrainm1(len, nd)
	140	REAL sij1(len, nd, nd), elij1(len, nd, nd)
	141	REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd)
	142
	143	REAL phi21(len, nd, nd)
	144	REAL d1a1(len, nd), dam1(len, nd)
	145	REAL epmlmmm1(len, nd, nd), eplamm1(len, nd)
	146	! RomP <<<
[2481]	147	REAL epmax_diag1 (len) ! epmax_cape
[1992]	148
	149	! -------------------------------------------------------------------
	150	! Original Prologue by Kerry Emanuel.
	151	! -------------------------------------------------------------------
	152	! --- ARGUMENTS
	153	! -------------------------------------------------------------------
	154	! --- On input:
	155
	156	! t: Array of absolute temperature (K) of dimension ND, with first
	157	! index corresponding to lowest model level. Note that this array
	158	! will be altered by the subroutine if dry convective adjustment
	159	! occurs and if IPBL is not equal to 0.
	160
	161	! q: Array of specific humidity (gm/gm) of dimension ND, with first
	162	! index corresponding to lowest model level. Must be defined
	163	! at same grid levels as T. Note that this array will be altered
	164	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	165
	166	! qs: Array of saturation specific humidity of dimension ND, with first
	167	! index corresponding to lowest model level. Must be defined
	168	! at same grid levels as T. Note that this array will be altered
	169	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	170
	171	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
	172	! index corresponding with the lowest model level. Defined at
	173	! same levels as T. Note that this array will be altered if
	174	! dry convective adjustment occurs and if IPBL is not equal to 0.
	175
	176	! v: Same as u but for meridional velocity.
	177
	178	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
	179	! where NTRA is the number of different tracers. If no
	180	! convective tracer transport is needed, define a dummy
	181	! input array of dimension (ND,1). Tracers are defined at
	182	! same vertical levels as T. Note that this array will be altered
	183	! if dry convective adjustment occurs and if IPBL is not equal to 0.
	184
	185	! p: Array of pressure (mb) of dimension ND, with first
	186	! index corresponding to lowest model level. Must be defined
	187	! at same grid levels as T.
	188
	189	! ph: Array of pressure (mb) of dimension ND+1, with first index
	190	! corresponding to lowest level. These pressures are defined at
	191	! levels intermediate between those of P, T, Q and QS. The first
	192	! value of PH should be greater than (i.e. at a lower level than)
	193	! the first value of the array P.
	194
	195	! nl: The maximum number of levels to which convection can penetrate, plus
	196	! 1.
	197	! NL MUST be less than or equal to ND-1.
	198
	199	! delt: The model time step (sec) between calls to CONVECT
	200
	201	! ----------------------------------------------------------------------------
	202	! --- On Output:
	203
	204	! iflag: An output integer whose value denotes the following:
	205	! VALUE INTERPRETATION
	206	! ----- --------------
	207	! 0 Moist convection occurs.
	208	! 1 Moist convection occurs, but a CFL condition
	209	! on the subsidence warming is violated. This
	210	! does not cause the scheme to terminate.
	211	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
	212	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
	213	! 4 No moist convection; atmosphere is not
	214	! unstable
	215	! 6 No moist convection because ihmin le minorig.
	216	! 7 No moist convection because unreasonable
	217	! parcel level temperature or specific humidity.
	218	! 8 No moist convection: lifted condensation
	219	! level is above the 200 mb level.
	220	! 9 No moist convection: cloud base is higher
	221	! then the level NL-1.
	222
	223	! ft: Array of temperature tendency (K/s) of dimension ND, defined at
	224	! same
	225	! grid levels as T, Q, QS and P.
	226
	227	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
	228	! defined at same grid levels as T, Q, QS and P.
	229
	230	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
	231	! defined at same grid levels as T.
	232
	233	! fv: Same as FU, but for forcing of meridional velocity.
	234
	235	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
	236	! second, defined at same levels as T. Dimensioned (ND,NTRA).
	237
	238	! precip: Scalar convective precipitation rate (mm/day).
	239
	240	! VPrecip: Vertical profile of convective precipitation (kg/m2/s).
	241
	242	! wd: A convective downdraft velocity scale. For use in surface
	243	! flux parameterizations. See convect.ps file for details.
	244
	245	! tprime: A convective downdraft temperature perturbation scale (K).
	246	! For use in surface flux parameterizations. See convect.ps
	247	! file for details.
	248
	249	! qprime: A convective downdraft specific humidity
	250	! perturbation scale (gm/gm).
	251	! For use in surface flux parameterizations. See convect.ps
	252	! file for details.
	253
	254	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
	255	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
	256	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
	257	! by the calling program between calls to CONVECT.
	258
	259	! det: Array of detrainment mass flux of dimension ND.
	260
	261	! -------------------------------------------------------------------
	262
	263	! Local arrays
	264
	265
	266	INTEGER i, k, n, il, j
	267	INTEGER icbmax
	268	INTEGER nk1(klon)
	269	INTEGER icb1(klon)
	270	INTEGER inb1(klon)
	271	INTEGER icbs1(klon)
	272
	273	REAL plcl1(klon)
	274	REAL tnk1(klon)
	275	REAL qnk1(klon)
	276	REAL gznk1(klon)
	277	REAL pnk1(klon)
	278	REAL qsnk1(klon)
	279	REAL pbase1(klon)
	280	REAL buoybase1(klon)
	281
	282	REAL lv1(klon, klev)
	283	REAL cpn1(klon, klev)
	284	REAL tv1(klon, klev)
	285	REAL gz1(klon, klev)
	286	REAL hm1(klon, klev)
	287	REAL h1(klon, klev)
	288	REAL tp1(klon, klev)
	289	REAL tvp1(klon, klev)
	290	REAL clw1(klon, klev)
	291	REAL th1(klon, klev)
	292
	293	INTEGER ncum
	294
	295	! (local) compressed fields:
	296
	297	! ym integer nloc
	298	! ym parameter (nloc=klon) ! pour l'instant
[766]	299	#define nloc klon
[1992]	300	INTEGER idcum(nloc)
	301	INTEGER iflag(nloc), nk(nloc), icb(nloc)
	302	INTEGER nent(nloc, klev)
	303	INTEGER icbs(nloc)
	304	INTEGER inb(nloc), inbis(nloc)
[524]	305
[1992]	306	REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc)
	307	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
	308	REAL u(nloc, klev), v(nloc, klev)
	309	REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev)
	310	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
	311	REAL clw(nloc, klev)
	312	REAL dph(nloc, klev)
	313	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
	314	REAL tvp(nloc, klev)
	315	REAL sig(nloc, klev), w0(nloc, klev)
	316	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
	317	REAL frac(nloc), buoy(nloc, klev)
	318	REAL cape(nloc)
	319	REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev)
	320	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
	321	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
	322	REAL sij(nloc, klev, klev), elij(nloc, klev, klev)
	323	REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev)
	324	REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev)
	325	REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev)
	326	REAL fu(nloc, klev), fv(nloc, klev)
	327	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
	328	REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev)
	329	REAL tps(nloc, klev), qprime(nloc), tprime(nloc)
	330	REAL precip(nloc)
	331	REAL vprecip(nloc, klev+1)
	332	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
	333	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
	334	REAL qcondc(nloc, klev) ! cld
	335	REAL wd(nloc) ! gust
[524]	336
[1992]	337	! RomP >>>
	338	REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev)
	339	REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev)
	340	REAL phi2(nloc, klev, klev)
	341	REAL d1a(nloc, klev), dam(nloc, klev)
	342	REAL wdtraina(nloc, klev), wdtrainm(nloc, klev)
	343	REAL sigd(nloc)
	344	! RomP <<<
[2481]	345	REAL epmax_diag(nloc) ! epmax_cape
[524]	346
[1992]	347	nent(:, :) = 0
	348	! -------------------------------------------------------------------
	349	! --- SET CONSTANTS AND PARAMETERS
	350	! -------------------------------------------------------------------
	351	! print *, '-> cv_driver' !jyg
	352	! -- set simulation flags:
	353	! (common cvflag)
[524]	354
[1992]	355	CALL cv_flag(0)
[524]	356
[1992]	357	! -- set thermodynamical constants:
	358	! (common cvthermo)
[524]	359
[1992]	360	CALL cv_thermo(iflag_con)
[524]	361
[1992]	362	! -- set convect parameters
[879]	363
[1992]	364	! includes microphysical parameters and parameters that
	365	! control the rate of approach to quasi-equilibrium)
	366	! (common cvparam)
[524]	367
	368
[1992]	369	IF (iflag_con==30) THEN
	370	CALL cv30_param(nd, delt)
	371	END IF
[524]	372
[1992]	373	IF (iflag_con==4) THEN
	374	CALL cv_param(nd)
	375	END IF
[524]	376
[1992]	377	! ---------------------------------------------------------------------
	378	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
	379	! ---------------------------------------------------------------------
[524]	380
[1992]	381	ft1(:, :) = 0.0
	382	fq1(:, :) = 0.0
	383	fu1(:, :) = 0.0
	384	fv1(:, :) = 0.0
	385	tvp1(:, :) = 0.0
	386	tp1(:, :) = 0.0
	387	clw1(:, :) = 0.0
	388	! ym
	389	clw(:, :) = 0.0
	390	gz1(:, :) = 0.
	391	vprecip1(:, :) = 0.
	392	ma1(:, :) = 0.0
	393	upwd1(:, :) = 0.0
	394	dnwd1(:, :) = 0.0
	395	dnwd01(:, :) = 0.0
	396	qcondc1(:, :) = 0.0
[524]	397
[1992]	398	ftra1(:, :, :) = 0.0
[1742]	399
[1992]	400	elij1(:, :, :) = 0.0
	401	sij1(:, :, :) = 0.0
[524]	402
[1992]	403	precip1(:) = 0.0
	404	iflag1(:) = 0
	405	wd1(:) = 0.0
	406	cape1(:) = 0.0
[2481]	407	epmax_diag1(:) = 0.0 ! epmax_cape
[1774]	408
[2481]	409
[1992]	410	IF (iflag_con==30) THEN
	411	DO il = 1, len
	412	sig1(il, nd) = sig1(il, nd) + 1.
	413	sig1(il, nd) = amin1(sig1(il,nd), 12.1)
	414	END DO
	415	END IF
[524]	416
[1992]	417	! RomP >>>
	418	wdtraina1(:, :) = 0.
	419	wdtrainm1(:, :) = 0.
	420	da1(:, :) = 0.
	421	phi1(:, :, :) = 0.
	422	epmlmmm1(:, :, :) = 0.
	423	eplamm1(:, :) = 0.
	424	mp1(:, :) = 0.
	425	evap1(:, :) = 0.
	426	ep1(:, :) = 0.
	427	sij1(:, :, :) = 0.
	428	elij1(:, :, :) = 0.
	429	phi21(:, :, :) = 0.
	430	d1a1(:, :) = 0.
	431	dam1(:, :) = 0.
	432	! RomP <<<
[879]	433
[1992]	434	! --------------------------------------------------------------------
	435	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
	436	! --------------------------------------------------------------------
[524]	437
[1992]	438	IF (iflag_con==30) THEN
[524]	439
[1992]	440	! print*,'Emanuel version 30 '
	441	CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na
	442	, lv1, cpn1, tv1, gz1, h1, hm1, th1)
	443	END IF
[524]	444
[1992]	445	IF (iflag_con==4) THEN
	446	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, &
	447	hm1)
	448	END IF
[524]	449
[1992]	450	! --------------------------------------------------------------------
	451	! --- CONVECTIVE FEED
	452	! --------------------------------------------------------------------
[524]	453
[1992]	454	IF (iflag_con==30) THEN
	455	CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & !
	456	! nd->na
	457	, nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1)
	458	END IF
[524]	459
[1992]	460	IF (iflag_con==4) THEN
	461	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, &
	462	iflag1, tnk1, qnk1, gznk1, plcl1)
	463	END IF
[524]	464
[1992]	465	! --------------------------------------------------------------------
	466	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
	467	! (up through ICB for convect4, up through ICB+1 for convect3)
	468	! Calculates the lifted parcel virtual temperature at nk, the
	469	! actual temperature, and the adiabatic liquid water content.
	470	! --------------------------------------------------------------------
[524]	471
[1992]	472	IF (iflag_con==30) THEN
	473	CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na
	474	, tp1, tvp1, clw1, icbs1)
	475	END IF
[524]	476
[1992]	477	IF (iflag_con==4) THEN
	478	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, &
	479	tvp1, clw1)
	480	END IF
[524]	481
[1992]	482	! -------------------------------------------------------------------
	483	! --- TRIGGERING
	484	! -------------------------------------------------------------------
[524]	485
[1992]	486	IF (iflag_con==30) THEN
	487	CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & !
	488	! nd->na
	489	, pbase1, buoybase1, iflag1, sig1, w01)
	490	END IF
[524]	491
[1992]	492	IF (iflag_con==4) THEN
	493	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
	494	END IF
[524]	495
[1992]	496	! =====================================================================
	497	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
	498	! =====================================================================
[524]	499
[1992]	500	ncum = 0
	501	DO i = 1, len
	502	IF (iflag1(i)==0) THEN
	503	ncum = ncum + 1
	504	idcum(ncum) = i
	505	END IF
	506	END DO
[524]	507
[1992]	508	! print*,'cv_driver : klon, ncum = ',len,ncum
[524]	509
[1992]	510	IF (ncum>0) THEN
[524]	511
[1992]	512	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	513	! --- COMPRESS THE FIELDS
	514	! (-> vectorization over convective gridpoints)
	515	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[524]	516
[1992]	517	IF (iflag_con==30) THEN
	518	CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, &
	519	plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, &
	520	gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, &
	521	w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, &
	522	q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, &
	523	w0)
	524	END IF
[524]	525
[1992]	526	IF (iflag_con==4) THEN
	527	CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, &
	528	tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, &
	529	tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, &
	530	q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph)
	531	END IF
[524]	532
[1992]	533	! -------------------------------------------------------------------
	534	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
	535	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
	536	! --- &
	537	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
	538	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
	539	! --- &
	540	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
	541	! -------------------------------------------------------------------
[524]	542
[1992]	543	IF (iflag_con==30) THEN
	544	CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd
	545	, tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, &
	546	inb, tp, tvp, clw, hp, ep, sigp, buoy)
	547	END IF
[524]	548
[1992]	549	IF (iflag_con==4) THEN
	550	CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, &
	551	gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
	552	END IF
[524]	553
[1992]	554	! -------------------------------------------------------------------
	555	! --- CLOSURE
	556	! -------------------------------------------------------------------
[524]	557
[1992]	558	IF (iflag_con==30) THEN
	559	CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd
	560	, pbase, p, ph, tv, buoy, sig, w0, cape, m)
[2481]	561
	562	! epmax_cape
	563	call cv30_epmax_fn_cape(nloc,ncum,nd &
	564	,cape,ep,hp,icb,inb,clw,nk,t,h,lv &
	565	,epmax_diag)
	566	! on écrase ep et recalcule hp
[1992]	567	END IF
[524]	568
[1992]	569	IF (iflag_con==4) THEN
	570	CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, &
	571	cpn, iflag, cbmf)
	572	END IF
[2481]	573
[524]	574
[1992]	575	! -------------------------------------------------------------------
	576	! --- MIXING
	577	! -------------------------------------------------------------------
[524]	578
[1992]	579	IF (iflag_con==30) THEN
	580	CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & !
	581	! na->nd
	582	, ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, &
	583	ment, qent, uent, vent, sij, elij, ments, qents, traent)
	584	END IF
[524]	585
[1992]	586	IF (iflag_con==4) THEN
	587	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, &
	588	h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, &
	589	nent, sij, elij)
	590	END IF
[524]	591
[1992]	592	! -------------------------------------------------------------------
	593	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
	594	! -------------------------------------------------------------------
[524]	595
[1992]	596	IF (iflag_con==30) THEN
	597	! RomP >>>
	598	CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd
	599	, t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, &
	600	ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, &
	601	wdtraina, wdtrainm)
	602	! RomP <<<
	603	END IF
[524]	604
[1992]	605	IF (iflag_con==4) THEN
	606	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, &
	607	ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap)
	608	END IF
[524]	609
[1992]	610	! -------------------------------------------------------------------
	611	! --- YIELD
	612	! (tendencies, precipitation, variables of interface with other
	613	! processes, etc)
	614	! -------------------------------------------------------------------
[524]	615
[1992]	616	IF (iflag_con==30) THEN
	617	CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd
	618	, icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, &
	619	clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, &
	620	uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, &
	621	ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, &
	622	wd)
	623	END IF
[524]	624
[1992]	625	IF (iflag_con==4) THEN
	626	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, &
	627	ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, &
	628	evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, &
	629	tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc)
	630	END IF
[524]	631
[1992]	632	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	633	! --- passive tracers
	634	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[524]	635
[1992]	636	IF (iflag_con==30) THEN
	637	! RomP >>>
	638	CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, &
	639	d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb)
	640	! RomP <<<
	641	END IF
[524]	642
[1992]	643	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	644	! --- UNCOMPRESS THE FIELDS
	645	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	646	! set iflag1 =42 for non convective points
	647	DO i = 1, len
	648	iflag1(i) = 42
	649	END DO
[524]	650
[1992]	651	IF (iflag_con==30) THEN
	652	CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, &
	653	vprecip, evap, ep, sig, w0 & !RomP
	654	, ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, &
	655	da, phi, mp, phi2, d1a, dam, sij & !RomP
	656	, elij, clw, epmlmmm, eplamm & !RomP
[2481]	657	, wdtraina, wdtrainm,epmax_diag & !RomP
[1992]	658	, iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP
	659	, ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, &
	660	qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP
	661	, elij1, clw1, epmlmmm1, eplamm1 & !RomP
[2481]	662	, wdtraina1, wdtrainm1,epmax_diag1) !RomP
[1992]	663	END IF
[524]	664
[1992]	665	IF (iflag_con==4) THEN
	666	CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, &
	667	fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, &
	668	ma1, qcondc1)
	669	END IF
[524]	670
[1992]	671	END IF ! ncum>0
[524]	672
[1992]	673	! print *, 'fin cv_driver ->' !jyg
	674	RETURN
	675	END SUBROUTINE cv_driver
[1849]	676
[1992]	677	! ==================================================================
	678	SUBROUTINE cv_flag(iflag_ice_thermo)
	679	IMPLICIT NONE
[524]	680
[1992]	681	! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if
	682	! iflag_ice_thermo >=1
	683	INTEGER iflag_ice_thermo
[524]	684
[1992]	685	include "cvflag.h"
[524]	686
[1992]	687	! -- si .TRUE., on rend la gravite plus explicite et eventuellement
	688	! differente de 10.0 dans convect3:
	689	cvflag_grav = .TRUE.
	690	cvflag_ice = iflag_ice_thermo >= 1
[524]	691
[1992]	692	RETURN
	693	END SUBROUTINE cv_flag
[524]	694
[1992]	695	! ==================================================================
	696	SUBROUTINE cv_thermo(iflag_con)
	697	IMPLICIT NONE
[524]	698
[1992]	699	! -------------------------------------------------------------
	700	! Set thermodynamical constants for convectL
	701	! -------------------------------------------------------------
[524]	702
[1992]	703	include "YOMCST.h"
	704	include "cvthermo.h"
[524]	705
[1992]	706	INTEGER iflag_con
[524]	707
	708
[1992]	709	! original set from convect:
	710	IF (iflag_con==4) THEN
	711	cpd = 1005.7
	712	cpv = 1870.0
	713	cl = 4190.0
	714	rrv = 461.5
	715	rrd = 287.04
	716	lv0 = 2.501E6
	717	g = 9.8
	718	t0 = 273.15
	719	grav = g
	720	ELSE
[524]	721
[1992]	722	! constants consistent with LMDZ:
	723	cpd = rcpd
	724	cpv = rcpv
	725	cl = rcw
	726	ci = rcs
	727	rrv = rv
	728	rrd = rd
	729	lv0 = rlvtt
	730	lf0 = rlstt - rlvtt
	731	g = rg ! not used in convect3
	732	! ori t0 = RTT
	733	t0 = 273.15 ! convect3 (RTT=273.16)
	734	! maf grav= 10. ! implicitely or explicitely used in convect3
	735	grav = g ! implicitely or explicitely used in convect3
	736	END IF
[524]	737
[1992]	738	rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?)
	739
	740	clmcpv = cl - cpv
	741	clmcpd = cl - cpd
	742	clmci = cl - ci
	743	cpdmcp = cpd - cpv
	744	cpvmcpd = cpv - cpd
	745	cpvmcl = cl - cpv ! for convect3
	746	eps = rrd/rrv
	747	epsi = 1.0/eps
	748	epsim1 = epsi - 1.0
	749	! ginv=1.0/g
	750	ginv = 1.0/grav
	751	hrd = 0.5*rrd
	752
	753	RETURN
	754	END SUBROUTINE cv_thermo

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format