Context Navigation

cv3p2_closure.F90 @ 2379

Last change on this file since 2379 was 2374, checked in by jyg, 9 years ago
Creation of a new closure routine for Emanuel convective scheme: cv3p2_closure.F90 (called when iflag_clos=3) is a cleaned up and reordered version of cv3p1_closure.F90. cv3p1_closure.F90 (called when iflag_clos=2) is kept for numerical compatibility with earlier versions.
File size: 21.5 KB

Line
1
2
3	SUBROUTINE cv3p2_closure(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, tv, &
4	tvp, buoy, supmax, ok_inhib, ale, alp, omega,sig, w0, ptop2, cape, cin, m, &
5	iflag, coef, plim1, plim2, asupmax, supmax0, asupmaxmin, cbmflast, plfc, &
6	wbeff)
7
8
9	! **************************************************************
10	! *
11	! CV3P2_CLOSURE *
12	! Ale & Alp Closure of Convect3 *
13	! *
14	! written by : Kerry Emanuel *
15	! vectorization: S. Bony *
16	! modified by : Jean-Yves Grandpeix, 18/06/2003, 19.32.10 *
17	! Julie Frohwirth, 14/10/2005 17.44.22 *
18	! **************************************************************
19
20	USE print_control_mod, ONLY: prt_level, lunout
21	IMPLICIT NONE
22
23	include "cvthermo.h"
24	include "cv3param.h"
25	include "YOMCST2.h"
26	include "YOMCST.h"
27	include "conema3.h"
28
29	! input:
30	INTEGER, INTENT (IN) :: ncum, nd, nloc
31	INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, inb
32	REAL, DIMENSION (nloc), INTENT (IN) :: pbase, plcl
33	REAL, DIMENSION (nloc, nd), INTENT (IN) :: p
34	REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph
35	REAL, DIMENSION (nloc, nd), INTENT (IN) :: tv, tvp, buoy
36	REAL, DIMENSION (nloc, nd), INTENT (IN) :: supmax
37	LOGICAL, INTENT (IN) :: ok_inhib ! enable convection inhibition by dryness
38	REAL, DIMENSION (nloc), INTENT (IN) :: ale, alp
39	REAL, DIMENSION (nloc, nd), INTENT (IN) :: omega
40
41	! input/output:
42	REAL, DIMENSION (nloc, nd), INTENT (INOUT) :: sig, w0
43	REAL, DIMENSION (nloc), INTENT (INOUT) :: ptop2
44
45	! output:
46	REAL, DIMENSION (nloc), INTENT (OUT) :: cape, cin
47	REAL, DIMENSION (nloc, nd), INTENT (OUT) :: m
48	REAL, DIMENSION (nloc), INTENT (OUT) :: plim1, plim2
49	REAL, DIMENSION (nloc, nd), INTENT (OUT) :: asupmax
50	REAL, DIMENSION (nloc), INTENT (OUT) :: supmax0
51	REAL, DIMENSION (nloc), INTENT (OUT) :: asupmaxmin
52	REAL, DIMENSION (nloc), INTENT (OUT) :: cbmflast, plfc
53	REAL, DIMENSION (nloc), INTENT (OUT) :: wbeff
54	INTEGER, DIMENSION (nloc), INTENT (OUT) :: iflag
55
56	! local variables:
57	INTEGER :: il, i, j, k, icbmax
58	INTEGER, DIMENSION (nloc) :: i0, klfc
59	REAL :: deltap, fac, w, amu
60	REAL, DIMENSION (nloc, nd) :: rhodp ! Factor such that m=rhodpsigw
61	REAL :: pbmxup
62	REAL, DIMENSION (nloc, nd) :: dtmin, sigold
63	REAL, DIMENSION (nloc, nd) :: coefmix
64	REAL, DIMENSION (nloc) :: pzero, ptop2old
65	REAL, DIMENSION (nloc) :: cina, cinb
66	INTEGER, DIMENSION (nloc) :: ibeg
67	INTEGER, DIMENSION (nloc) :: nsupmax
68	REAL :: supcrit
69	REAL, DIMENSION (nloc, nd) :: temp
70	REAL, DIMENSION (nloc) :: p1, pmin
71	REAL, DIMENSION (nloc) :: asupmax0
72	LOGICAL, DIMENSION (nloc) :: ok
73	REAL, DIMENSION (nloc, nd) :: siglim, wlim, mlim
74	REAL, DIMENSION (nloc) :: wb2
75	REAL, DIMENSION (nloc) :: cbmf0 ! initial cloud base mass flux
76	REAL, DIMENSION (nloc) :: cbmflim ! cbmf given by Cape closure
77	REAL, DIMENSION (nloc) :: cbmfalp ! cbmf given by Alp closure
78	REAL, DIMENSION (nloc) :: cbmfalpb ! bounded cbmf given by Alp closure
79	REAL, DIMENSION (nloc) :: cbmfmax ! upper bound on cbmf
80	REAL, DIMENSION (nloc) :: coef
81	REAL, DIMENSION (nloc) :: xp, xq, xr, discr, b3, b4
82	REAL, DIMENSION (nloc) :: theta, bb
83	REAL :: term1, term2, term3
84	REAL, DIMENSION (nloc) :: alp2 ! Alp with offset
85
86	REAL :: sigmax
87	PARAMETER (sigmax=0.1)
88	!! PARAMETER (sigmax=10.)
89
90	CHARACTER (LEN=20) :: modname = 'cv3p2_closure'
91	CHARACTER (LEN=80) :: abort_message
92
93	INTEGER,SAVE :: igout=1
94	!$OMP THREADPRIVATE(igout)
95
96	IF (prt_level>=20) print *,' -> cv3p2_closure, Ale ',ale(igout)
97
98
99	! -------------------------------------------------------
100	! -- Initialization
101	! -------------------------------------------------------
102
103
104	DO il = 1, ncum
105	alp2(il) = max(alp(il), 1.E-5)
106	! IM
107	alp2(il) = max(alp(il), 1.E-12)
108	END DO
109
110	pbmxup = 50. ! PBMXUP+PBCRIT = cloud depth above which mixed updraughts
111	! exist (if any)
112
113	IF (prt_level>=20) PRINT *, 'cv3p2_closure nloc ncum nd icb inb nl', nloc, &
114	ncum, nd, icb(nloc), inb(nloc), nl
115	DO k = 1, nl
116	DO il = 1, ncum
117	m(il, k) = 0.0
118	rhodp(il,k) = 0.007p(il, k)(ph(il,k)-ph(il,k+1))/tv(il, k)
119	END DO
120	END DO
121
122	! -------------------------------------------------------
123	! -- Reset sig(i) and w0(i) for i>inb and i<icb
124	! -------------------------------------------------------
125
126	! update sig and w0 above LNB:
127
128	DO k = 1, nl - 1
129	DO il = 1, ncum
130	IF ((inb(il)<(nl-1)) .AND. (k>=(inb(il)+1))) THEN
131	sig(il, k) = betasig(il, k) + 2.alphabuoy(il, inb(il))abs(buoy(il,inb(il)))
132	sig(il, k) = amax1(sig(il,k), 0.0)
133	w0(il, k) = beta*w0(il, k)
134	END IF
135	END DO
136	END DO
137
138	! if(prt.level.GE.20) print*,'cv3p2_closure apres 100'
139	! compute icbmax:
140
141	icbmax = 2
142	DO il = 1, ncum
143	icbmax = max(icbmax, icb(il))
144	END DO
145	! if(prt.level.GE.20) print*,'cv3p2_closure apres 200'
146
147	! update sig and w0 below cloud base:
148
149	DO k = 1, icbmax
150	DO il = 1, ncum
151	IF (k<=icb(il)) THEN
152	sig(il, k) = betasig(il, k) - 2.alphabuoy(il, icb(il))buoy(il,icb(il))
153	sig(il, k) = amax1(sig(il,k), 0.0)
154	w0(il, k) = beta*w0(il, k)
155	END IF
156	END DO
157	END DO
158	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 300'
159
160	! -------------------------------------------------------------
161	! -- Reset fractional areas of updrafts and w0 at initial time
162	! -- and after 10 time steps of no convection
163	! -------------------------------------------------------------
164
165	DO k = 1, nl - 1
166	DO il = 1, ncum
167	IF (sig(il,nd)<1.5 .OR. sig(il,nd)>12.0) THEN
168	sig(il, k) = 0.0
169	w0(il, k) = 0.0
170	END IF
171	END DO
172	END DO
173	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 400'
174
175	! -------------------------------------------------------
176	! -- Compute initial cloud base mass flux (Cbmf0)
177	! -------------------------------------------------------
178	DO il = 1, ncum
179	cbmf0(il) = 0.0
180	END DO
181
182	DO k = 1, nl
183	DO il = 1, ncum
184	IF (k>=icb(il) .AND. k<=inb(il) &
185	.AND. icb(il)+1<=inb(il)) THEN
186	cbmf0(il) = cbmf0(il) + sig(il, k)w0(il,k)rhodp(il,k)
187	END IF
188	END DO
189	END DO
190
191	! -------------------------------------------------------------
192	! jyg1
193	! -- Calculate adiabatic ascent top pressure (ptop)
194	! -------------------------------------------------------------
195
196
197	! c 1. Start at first level where precipitations form
198	DO il = 1, ncum
199	pzero(il) = plcl(il) - pbcrit
200	END DO
201
202	! c 2. Add offset
203	DO il = 1, ncum
204	pzero(il) = pzero(il) - pbmxup
205	END DO
206	DO il = 1, ncum
207	ptop2old(il) = ptop2(il)
208	END DO
209
210	DO il = 1, ncum
211	! CR:c est quoi ce 300??
212	p1(il) = pzero(il) - 300.
213	END DO
214
215	! compute asupmax=abs(supmax) up to lnm+1
216
217	DO il = 1, ncum
218	ok(il) = .TRUE.
219	nsupmax(il) = inb(il)
220	END DO
221
222	DO i = 1, nl
223	DO il = 1, ncum
224	IF (i>icb(il) .AND. i<=inb(il)) THEN
225	IF (p(il,i)<=pzero(il) .AND. supmax(il,i)<0 .AND. ok(il)) THEN
226	nsupmax(il) = i
227	ok(il) = .FALSE.
228	END IF ! end IF (P(i) ... )
229	END IF ! end IF (icb+1 le i le inb)
230	END DO
231	END DO
232
233	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 2.'
234	DO i = 1, nl
235	DO il = 1, ncum
236	asupmax(il, i) = abs(supmax(il,i))
237	END DO
238	END DO
239
240
241	DO il = 1, ncum
242	asupmaxmin(il) = 10.
243	pmin(il) = 100.
244	! IM ??
245	asupmax0(il) = 0.
246	END DO
247
248	! c 3. Compute in which level is Pzero
249
250	! IM bug i0 = 18
251	DO il = 1, ncum
252	i0(il) = nl
253	END DO
254
255	DO i = 1, nl
256	DO il = 1, ncum
257	IF (i>icb(il) .AND. i<=inb(il)) THEN
258	IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN
259	IF (pzero(il)>p(il,i) .AND. pzero(il)<p(il,i-1)) THEN
260	i0(il) = i
261	END IF
262	END IF
263	END IF
264	END DO
265	END DO
266	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 3.'
267
268	! c 4. Compute asupmax at Pzero
269
270	DO i = 1, nl
271	DO il = 1, ncum
272	IF (i>icb(il) .AND. i<=inb(il)) THEN
273	IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN
274	asupmax0(il) = ((pzero(il)-p(il,i0(il)-1))*asupmax(il,i0(il))- &
275	(pzero(il)-p(il,i0(il)))*asupmax(il,i0(il)-1))/(p(il,i0(il))-p(il,i0(il)-1))
276	END IF
277	END IF
278	END DO
279	END DO
280
281
282	DO i = 1, nl
283	DO il = 1, ncum
284	IF (p(il,i)==pzero(il)) THEN
285	asupmax(i, il) = asupmax0(il)
286	END IF
287	END DO
288	END DO
289	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 4.'
290
291	! c 5. Compute asupmaxmin, minimum of asupmax
292
293	DO i = 1, nl
294	DO il = 1, ncum
295	IF (i>icb(il) .AND. i<=inb(il)) THEN
296	IF (p(il,i)<=pzero(il) .AND. p(il,i)>=p1(il)) THEN
297	IF (asupmax(il,i)<asupmaxmin(il)) THEN
298	asupmaxmin(il) = asupmax(il, i)
299	pmin(il) = p(il, i)
300	END IF
301	END IF
302	END IF
303	END DO
304	END DO
305
306	DO il = 1, ncum
307	! IM
308	IF (prt_level>=20) THEN
309	PRINT *, 'cv3p2_closure il asupmax0 asupmaxmin', il, asupmax0(il), &
310	asupmaxmin(il), pzero(il), pmin(il)
311	END IF
312	IF (asupmax0(il)<asupmaxmin(il)) THEN
313	asupmaxmin(il) = asupmax0(il)
314	pmin(il) = pzero(il)
315	END IF
316	END DO
317	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 5.'
318
319
320	! Compute Supmax at Pzero
321
322	DO i = 1, nl
323	DO il = 1, ncum
324	IF (i>icb(il) .AND. i<=inb(il)) THEN
325	IF (p(il,i)<=pzero(il)) THEN
326	supmax0(il) = ((p(il,i)-pzero(il))*asupmax(il,i-1)- &
327	(p(il,i-1)-pzero(il))*asupmax(il,i))/(p(il,i)-p(il,i-1))
328	GO TO 425
329	END IF ! end IF (P(i) ... )
330	END IF ! end IF (icb+1 le i le inb)
331	END DO
332	END DO
333
334	425 CONTINUE
335	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 425.'
336
337	! c 6. Calculate ptop2
338
339	DO il = 1, ncum
340	IF (asupmaxmin(il)<supcrit1) THEN
341	ptop2(il) = pmin(il)
342	END IF
343
344	IF (asupmaxmin(il)>supcrit1 .AND. asupmaxmin(il)<supcrit2) THEN
345	ptop2(il) = ptop2old(il)
346	END IF
347
348	IF (asupmaxmin(il)>supcrit2) THEN
349	ptop2(il) = ph(il, inb(il))
350	END IF
351	END DO
352
353	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 6.'
354
355	! c 7. Compute multiplying factor for adiabatic updraught mass flux
356
357
358	IF (ok_inhib) THEN
359
360	DO i = 1, nl
361	DO il = 1, ncum
362	IF (i<=nl) THEN
363	coefmix(il, i) = (min(ptop2(il),ph(il,i))-ph(il,i))/(ph(il,i+1)-ph(il,i))
364	coefmix(il, i) = min(coefmix(il,i), 1.)
365	END IF
366	END DO
367	END DO
368
369
370	ELSE ! when inhibition is not taken into account, coefmix=1
371
372
373
374	DO i = 1, nl
375	DO il = 1, ncum
376	IF (i<=nl) THEN
377	coefmix(il, i) = 1.
378	END IF
379	END DO
380	END DO
381
382	END IF ! ok_inhib
383	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 7.'
384	! -------------------------------------------------------------------
385	! -------------------------------------------------------------------
386
387
388	! jyg2
389
390	! ==========================================================================
391
392
393	! -------------------------------------------------------------
394	! -- Calculate convective inhibition (CIN)
395	! -------------------------------------------------------------
396
397	! do i=1,nloc
398	! print*,'avant cine p',pbase(i),plcl(i)
399	! enddo
400	! do j=1,nd
401	! do i=1,nloc
402	! print*,'avant cine t',tv(i),tvp(i)
403	! enddo
404	! enddo
405	CALL cv3_cine(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, tv, tvp, cina, &
406	cinb, plfc)
407
408	DO il = 1, ncum
409	cin(il) = cina(il) + cinb(il)
410	END DO
411	IF (prt_level>=20) PRINT *, 'cv3p2_closure after cv3_cine: cina, cinb, cin ', &
412	cina(igout), cinb(igout), cin(igout)
413	! -------------------------------------------------------------
414	! --Update buoyancies to account for Ale
415	! -------------------------------------------------------------
416
417	CALL cv3_buoy(nloc, ncum, nd, icb, inb, pbase, plcl, p, ph, ale, cin, tv, &
418	tvp, buoy)
419	IF (prt_level>=20) PRINT *, 'cv3p2_closure after cv3_buoy'
420
421	! -------------------------------------------------------------
422	! -- Calculate convective available potential energy (cape),
423	! -- vertical velocity (w), fractional area covered by
424	! -- undilute updraft (sig), and updraft mass flux (m)
425	! -------------------------------------------------------------
426
427	DO il = 1, ncum
428	cape(il) = 0.0
429	END DO
430
431	! compute dtmin (minimum buoyancy between ICB and given level k):
432
433	DO k = 1, nl
434	DO il = 1, ncum
435	dtmin(il, k) = 100.0
436	END DO
437	END DO
438
439	DO k = 1, nl
440	DO j = minorig, nl
441	DO il = 1, ncum
442	IF ((k>=(icb(il)+1)) .AND. (k<=inb(il)) .AND. (j>=icb(il)) &
443	.AND. (j<=(k-1))) THEN
444	dtmin(il, k) = amin1(dtmin(il,k), buoy(il,j))
445	END IF
446	END DO
447	END DO
448	END DO
449	!
450	IF (prt_level >= 20) THEN
451	print *,'cv3p2_closure: dtmin ', (k, dtmin(igout,k), k=1,nl)
452	ENDIF
453	!
454	! the interval on which cape is computed starts at pbase :
455
456	DO k = 1, nl
457	DO il = 1, ncum
458
459	IF ((k>=(icb(il)+1)) .AND. (k<=inb(il))) THEN
460
461	deltap = min(pbase(il), ph(il,k-1)) - min(pbase(il), ph(il,k))
462	cape(il) = cape(il) + rrdbuoy(il, k-1)deltap/p(il, k-1)
463	cape(il) = amax1(0.0, cape(il))
464	sigold(il, k) = sig(il, k)
465
466
467	! jyg Coefficient coefmix limits convection to levels where a
468	! sufficient
469	! fraction of mixed draughts are ascending.
470	siglim(il, k) = coefmix(il, k)alpha1dtmin(il, k)*abs(dtmin(il,k))
471	siglim(il, k) = amax1(siglim(il,k), 0.0)
472	siglim(il, k) = amin1(siglim(il,k), 0.01)
473	! c fac=AMIN1(((dtcrit-dtmin(il,k))/dtcrit),1.0)
474	fac = 1.
475	wlim(il, k) = fac*sqrt(cape(il))
476	amu = siglim(il, k)*wlim(il, k)
477	!! rhodp(il,k) = 0.007p(il, k)(ph(il,k)-ph(il,k+1))/tv(il, k) !cor jyg : computed earlier
478	mlim(il, k) = amu*rhodp(il,k)
479	! print*, 'siglim ', k,siglim(1,k)
480	END IF
481
482	END DO
483	END DO
484	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 600'
485
486	DO il = 1, ncum
487	! IM beg
488	IF (prt_level>=20) THEN
489	PRINT *, 'cv3p2_closure il icb mlim ph ph+1 ph+2', il, icb(il), &
490	mlim(il, icb(il)+1), ph(il, icb(il)), ph(il, icb(il)+1), &
491	ph(il, icb(il)+2)
492	END IF
493
494	IF (icb(il)+1<=inb(il)) THEN
495	! IM end
496	mlim(il, icb(il)) = 0.5mlim(il,icb(il)+1)(ph(il,icb(il))-ph(il,icb(il)+1))/ &
497	(ph(il,icb(il)+1)-ph(il,icb(il)+2))
498	! IM beg
499	END IF !(icb(il.le.inb(il))) then
500	! IM end
501	END DO
502	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres 700'
503
504	!
505	! ------------------------------------------------------------------------
506	! c Compute Cloud base mass flux given by Cape closure (cbmflim = cbmf of
507	! c elementary systems), cbmf given by Alp closure (cbmfalp), cbmf given by Alp
508	! c closure with an upper bound imposed (cbmfalpb) and cbmf resulting from
509	! c time integration (cbmflast).
510	! ------------------------------------------------------------------------
511
512	DO il = 1, ncum
513	cbmflim(il) = 0.
514	cbmfalp(il) = 0.
515	cbmfalpb(il) = 0.
516	cbmflast(il) = 0.
517	END DO
518
519	! c 1. Compute cloud base mass flux of elementary system (Cbmflim)
520
521	DO k = 1, nl
522	DO il = 1, ncum
523	! old IF (k .ge. icb(il) .and. k .le. inb(il)) THEN
524	! IM IF (k .ge. icb(il)+1 .and. k .le. inb(il)) THEN
525	IF (k>=icb(il) .AND. k<=inb(il) & !cor jyg
526	.AND. icb(il)+1<=inb(il)) THEN !cor jyg
527	cbmflim(il) = cbmflim(il) + mlim(il, k)
528	END IF
529	END DO
530	END DO
531	IF (prt_level>=20) PRINT *, 'cv3p2_closure after cbmflim: cbmflim ', cbmflim(igout)
532
533	! 1.5 Compute cloud base mass flux given by Alp closure (Cbmfalp), maximum
534	! allowed mass flux (Cbmfmax) and bounded mass flux (Cbmfalpb)
535	! Cbmfalpb is set to zero if Cbmflim (the mass flux of elementary cloud)
536	! is exceedingly small.
537
538	DO il = 1, ncum
539	wb2(il) = sqrt(2.*max(ale(il)+cin(il),0.))
540	END DO
541
542	DO il = 1, ncum
543	IF (plfc(il)<100.) THEN
544	! This is an irealistic value for plfc => no calculation of wbeff
545	wbeff(il) = 100.1
546	ELSE
547	! Calculate wbeff
548	IF (flag_wb==0) THEN
549	wbeff(il) = wbmax
550	ELSE IF (flag_wb==1) THEN
551	wbeff(il) = wbmax/(1.+500./(ph(il,1)-plfc(il)))
552	ELSE IF (flag_wb==2) THEN
553	wbeff(il) = wbmax(0.01(ph(il,1)-plfc(il)))**2
554	END IF
555	END IF
556	END DO
557
558	!CR:Compute k at plfc
559	DO il=1,ncum
560	klfc(il)=nl
561	ENDDO
562	DO k=1,nl
563	DO il=1,ncum
564	if ((plfc(il).lt.ph(il,k)).and.(plfc(il).ge.ph(il,k+1))) then
565	klfc(il)=k
566	endif
567	ENDDO
568	ENDDO
569	!RC
570
571	DO il = 1, ncum
572	! jyg Modification du coef de wb*wb pour conformite avec papier Wake
573	! c cbmfalp(il) = alp2(il)/(0.5wbwb-Cin(il))
574	cbmfalp(il) = alp2(il)/(2.wbeff(il)wbeff(il)-cin(il))
575	!CR: Add large-scale component to the mass-flux
576	!encore connu sous le nom "Experience du tube de dentifrice"
577	if ((coef_clos_ls.gt.0.).and.(plfc(il).gt.0.)) then
578	cbmfalp(il) = cbmfalp(il) - coef_clos_lsmin(0.,1./RGomega(il,klfc(il)))
579	endif
580	!RC
581	IF (cbmfalp(il)==0 .AND. alp2(il)/=0.) THEN
582	WRITE (lunout, *) 'cv3p2_closure cbmfalp=0 and alp NE 0 il alp2 alp cin ' , &
583	il, alp2(il), alp(il), cin(il)
584	abort_message = ''
585	CALL abort_physic(modname, abort_message, 1)
586	END IF
587	cbmfmax(il) = sigmaxwb2(il)100.p(il, icb(il))/(rrdtv(il,icb(il)))
588	END DO
589
590	DO il = 1, ncum
591	IF (cbmflim(il)>1.E-6) THEN
592	! ATTENTION TEST CR
593	! if (cbmfmax(il).lt.1.e-12) then
594	cbmfalpb(il) = min(cbmfalp(il), cbmfmax(il))
595	! else
596	! cbmfalpb(il) = cbmfalp(il)
597	! endif
598	! print*,'cbmfalpb',cbmfalp(il),cbmfmax(il)
599	END IF
600	END DO
601	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres cbmfalpb: cbmfalpb ',cbmfalpb(igout)
602
603	! c 2. Compute coefficient and apply correction
604
605	DO il = 1, ncum
606	coef(il) = (cbmfalpb(il)+1.E-10)/(cbmflim(il)+1.E-10)
607	END DO
608	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres coef_plantePLUS'
609
610	DO k = 1, nl
611	DO il = 1, ncum
612	IF (k>=icb(il)+1 .AND. k<=inb(il)) THEN
613	amu = betasig(il, k)w0(il, k) + (1.-beta)coef(il)siglim(il, k)*wlim(il, k)
614	w0(il, k) = wlim(il, k)
615	w0(il, k) = max(w0(il,k), 1.E-10)
616	sig(il, k) = amu/w0(il, k)
617	sig(il, k) = min(sig(il,k), 1.)
618	! c amu = 0.5(SIG(il,k)+sigold(il,k))W0(il,k)
619	!jyg m(il, k) = amu0.007p(il, k)*(ph(il,k)-ph(il,k+1))/tv(il, k)
620	m(il, k) = amu*rhodp(il,k)
621	END IF
622	END DO
623	END DO
624	! jyg2
625	DO il = 1, ncum
626	w0(il, icb(il)) = 0.5*w0(il, icb(il)+1)
627	m(il, icb(il)) = 0.5m(il, icb(il)+1)(ph(il,icb(il))-ph(il,icb(il)+1))/ &
628	(ph(il,icb(il)+1)-ph(il,icb(il)+2))
629	sig(il, icb(il)) = sig(il, icb(il)+1)
630	sig(il, icb(il)-1) = sig(il, icb(il))
631	END DO
632	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres w0_sig_M: w0, sig ', &
633	(k,w0(igout,k),sig(igout,k), k=icb(igout),inb(igout))
634
635	! c 3. Compute final cloud base mass flux;
636	! c set iflag to 3 if cloud base mass flux is exceedingly small and is
637	! c decreasing (i.e. if the final mass flux (cbmflast) is greater than
638	! c the target mass flux (cbmfalpb)).
639
640	!jyg DO il = 1, ncum
641	!jyg cbmflast(il) = 0.
642	!jyg END DO
643
644	DO k = 1, nl
645	DO il = 1, ncum
646	IF (k>=icb(il) .AND. k<=inb(il)) THEN
647	!IMpropo?? IF ((k.ge.(icb(il)+1)).and.(k.le.inb(il))) THEN
648	cbmflast(il) = cbmflast(il) + m(il, k)
649	END IF
650	END DO
651	END DO
652	IF (prt_level>=20) PRINT *, 'cv3p2_closure apres cbmflast: cbmflast ',cbmflast(igout)
653
654	DO il = 1, ncum
655	IF (cbmflast(il)<1.E-6 .AND. cbmflast(il)>=cbmfalpb(il)) THEN
656	iflag(il) = 3
657	END IF
658	END DO
659
660	DO k = 1, nl
661	DO il = 1, ncum
662	IF (iflag(il)>=3) THEN
663	m(il, k) = 0.
664	sig(il, k) = 0.
665	w0(il, k) = 0.
666	END IF
667	END DO
668	END DO
669	!
670	IF (prt_level >= 10) THEN
671	print *,'cv3p2_closure: iflag ',iflag(igout)
672	ENDIF
673	!
674
675	! c 4. Introduce a correcting factor for coef, in order to obtain an
676	! effective
677	! c sigdz larger in the present case (using cv3p2_closure) than in the
678	! old
679	! c closure (using cv3_closure).
680	IF (1==0) THEN
681	DO il = 1, ncum
682	! c coef(il) = 2.*coef(il)
683	coef(il) = 5.*coef(il)
684	END DO
685	! version CVS du ..2008
686	ELSE
687	IF (iflag_cvl_sigd==0) THEN
688	! test pour verifier qu on fait la meme chose qu avant: sid constant
689	coef(1:ncum) = 1.
690	ELSE
691	coef(1:ncum) = min(2.*coef(1:ncum), 5.)
692	coef(1:ncum) = max(2.*coef(1:ncum), 0.2)
693	END IF
694	END IF
695
696	IF (prt_level>=20) PRINT *, 'cv3p2_closure FIN'
697	RETURN
698	END SUBROUTINE cv3p2_closure
699
700

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format